From c463eeb4b61308a3998726a3d063019184d1ab3e Mon Sep 17 00:00:00 2001
From: Alison Wang <alison.wang@nxp.com>
Date: Mon, 3 Feb 2020 15:25:19 +0800
Subject: ls1021a: Set CONFIG_SYS_BOOTMAPSZ to the memory for relocation

This patch sets CONFIG_SYS_BOOTMAPSZ to the amount of memory available
to safely contain a kernel, device tree and initrd for relocation. The
way to set fdt_high as 0xffffffff to disable device tree relocation is
removed.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 include/configs/ls1021aiot.h | 5 +++--
 include/configs/ls1021aqds.h | 3 +--
 include/configs/ls1021atsn.h | 3 ++-
 include/configs/ls1021atwr.h | 3 +--
 4 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'include')

diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index 1d218aa703d..7821e98a270 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -207,12 +207,13 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
-"initrd_high=0xffffffff\0"	\
-"fdt_high=0xffffffff\0"
+"initrd_high=0xffffffff\0"
 
 /*
  * Miscellaneous configurable options
  */
+#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
+
 #define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_MEMINFO
 
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 8bac2d25612..5a2bd754c4f 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -460,13 +460,11 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
 	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
-	"fdt_high=0xffffffff\0"         \
 	"initrd_high=0xffffffff\0"      \
 	"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
-	"fdt_high=0xffffffff\0"		\
 	"initrd_high=0xffffffff\0"      \
 	"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
 #endif
@@ -474,6 +472,7 @@ unsigned long get_board_ddr_clk(void);
 /*
  * Miscellaneous configurable options
  */
+#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
 
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h
index 984df6249f9..46c60aaf5cb 100644
--- a/include/configs/ls1021atsn.h
+++ b/include/configs/ls1021atsn.h
@@ -154,7 +154,6 @@
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0"		\
 	"initrd_high=0xffffffff\0"					\
-	"fdt_high=0xffffffff\0"						\
 	"fdt_addr=0x64f00000\0"						\
 	"kernel_addr=0x61000000\0"					\
 	"kernelheader_addr=0x60800000\0"				\
@@ -216,6 +215,8 @@
 		"bootm $load_addr#$board\0"
 
 /* Miscellaneous configurable options */
+#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
+
 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE		\
 		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 8e2784b14bf..6a6cdd19cca 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -299,7 +299,6 @@
 #define CONFIG_EXTRA_ENV_SETTINGS       \
 	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
 	"initrd_high=0xffffffff\0"      \
-	"fdt_high=0xffffffff\0"		\
 	"fdt_addr=0x64f00000\0"		\
 	"kernel_addr=0x65000000\0"	\
 	"scriptaddr=0x80000000\0"	\
@@ -357,7 +356,6 @@
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
 	"initrd_high=0xffffffff\0"      \
-	"fdt_high=0xffffffff\0"		\
 	"fdt_addr=0x64f00000\0"		\
 	"kernel_addr=0x61000000\0"	\
 	"kernelheader_addr=0x60800000\0"	\
@@ -441,6 +439,7 @@
 /*
  * Miscellaneous configurable options
  */
+#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
 
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
-- 
cgit v1.3.1


From 395b52127a8d46f890217eaaeab4ed54f65478a0 Mon Sep 17 00:00:00 2001
From: Yuantian Tang <andy.tang@nxp.com>
Date: Wed, 19 Feb 2020 17:02:21 +0800
Subject: arm64: ls1028a: remove fdt_high environment variable

Setting fdt_high and initrd_high to 0xffffffffffffffff leads to
various difficulty to resolve bugs.
Remove them and use bootm_size instead to safely contain a kernel,
device tree and initrd for relocation.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 include/configs/ls1028a_common.h | 3 +--
 include/configs/ls1028aqds.h     | 2 --
 2 files changed, 1 insertion(+), 4 deletions(-)

(limited to 'include')

diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 05b8cf00ee1..1c7680c2347 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -79,8 +79,7 @@
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
 	"ramdisk_addr=0x800000\0"		\
 	"ramdisk_size=0x2000000\0"		\
-	"fdt_high=0xffffffffffffffff\0"		\
-	"initrd_high=0xffffffffffffffff\0"	\
+	"bootm_size=0x10000000\0"		\
 	"fdt_addr=0x00f00000\0"                 \
 	"kernel_addr=0x01000000\0"              \
 	"scriptaddr=0x80000000\0"               \
diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h
index 982df07bb01..fca0a3af190 100644
--- a/include/configs/ls1028aqds.h
+++ b/include/configs/ls1028aqds.h
@@ -90,8 +90,6 @@
 	"hwconfig=fsl_ddr:bank_intlv=auto\0" \
 	"ramdisk_addr=0x800000\0" \
 	"ramdisk_size=0x2000000\0" \
-	"fdt_high=0xffffffffffffffff\0" \
-	"initrd_high=0xffffffffffffffff\0" \
 	"fdt_addr=0x00f00000\0" \
 	"kernel_addr=0x01000000\0" \
 	"scriptaddr=0x80000000\0" \
-- 
cgit v1.3.1


From e9d9c2e57391d38b4d62643dacaa4764db57cae9 Mon Sep 17 00:00:00 2001
From: Yuantian Tang <andy.tang@nxp.com>
Date: Wed, 19 Feb 2020 17:02:22 +0800
Subject: arm64: ls1046a: remove fdt_high environment variable

Setting fdt_high and initrd_high to 0xffffffffffffffff leads to
various difficulty to resolve bugs.
Remove them and use bootm_size instead to safely contain a kernel,
device tree and initrd for relocation.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 include/configs/ls1046a_common.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'include')

diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 3944f877942..978df3c9473 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -217,8 +217,7 @@
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
 	"ramdisk_addr=0x800000\0"		\
 	"ramdisk_size=0x2000000\0"		\
-	"fdt_high=0xffffffffffffffff\0"		\
-	"initrd_high=0xffffffffffffffff\0"	\
+	"bootm_size=0x10000000\0"		\
 	"fdt_addr=0x64f00000\0"                 \
 	"kernel_addr=0x65000000\0"              \
 	"scriptaddr=0x80000000\0"               \
-- 
cgit v1.3.1


From b7e7a46e1007a362be05c76efb3a2ee69e50880d Mon Sep 17 00:00:00 2001
From: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Date: Wed, 19 Feb 2020 23:30:45 +0530
Subject: lx2160a : Add emmc in boot_targets environment variable

Add emmc in supported boot_targets and
Add bootcmd environment variable for emmc boot.

Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 include/configs/lx2160a_common.h | 11 +++++++++++
 include/configs/lx2160aqds.h     |  7 +++++++
 include/configs/lx2160ardb.h     |  7 +++++++
 3 files changed, 25 insertions(+)

(limited to 'include')

diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index 373daebfbc4..fe0db770e86 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -266,9 +266,20 @@ unsigned long get_board_ddr_clk(void);
 		"run distro_bootcmd;run sd_bootcmd;"		\
 		"env exists secureboot && esbc_halt;"
 
+#define SD2_BOOTCOMMAND						\
+		"env exists mcinitcmd && mmcinfo; "		\
+		"mmc read 0x80d00000 0x6800 0x800; "		\
+		"env exists mcinitcmd && env exists secureboot "	\
+		" && mmc read 0x80780000 0x3C00 0x20 "		\
+		"&& esbc_validate 0x80780000;env exists mcinitcmd "	\
+		"&& fsl_mc lazyapply dpl 0x80d00000;"		\
+		"run distro_bootcmd;run sd2_bootcmd;"		\
+		"env exists secureboot && esbc_halt;"
+
 #define BOOT_TARGET_DEVICES(func) \
 	func(USB, usb, 0) \
 	func(MMC, mmc, 0) \
+	func(MMC, mmc, 1) \
 	func(SCSI, scsi, 0)
 #include <config_distro_bootcmd.h>
 
diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h
index 1eb63d826f9..e9e1770c949 100644
--- a/include/configs/lx2160aqds.h
+++ b/include/configs/lx2160aqds.h
@@ -137,6 +137,13 @@ u8 qixis_esdhc_detect_quirk(void);
 		"env exists secureboot && mmc read $kernelheader_addr_r "\
 		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
 		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$BOARD\0"			\
+	"sd2_bootcmd=echo Trying load from emmc card..;"	\
+		"mmc dev 1; mmcinfo; mmc read $load_addr "	\
+		"$kernel_addr_sd $kernel_size_sd ;"		\
+		"env exists secureboot && mmc read $kernelheader_addr_r "\
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
+		" && esbc_validate ${kernelheader_addr_r};"	\
 		"bootm $load_addr#$BOARD\0"
 
 #include <asm/fsl_secure_boot.h>
diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h
index 82d49e53abd..63d77c5fc4a 100644
--- a/include/configs/lx2160ardb.h
+++ b/include/configs/lx2160ardb.h
@@ -107,6 +107,13 @@
 		"env exists secureboot && mmc read $kernelheader_addr_r "\
 		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
 		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$BOARD\0"			\
+	"sd2_bootcmd=echo Trying load from emmc card..;"	\
+		"mmc dev 1; mmcinfo; mmc read $load_addr "	\
+		"$kernel_addr_sd $kernel_size_sd ;"		\
+		"env exists secureboot && mmc read $kernelheader_addr_r "\
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
+		" && esbc_validate ${kernelheader_addr_r};"	\
 		"bootm $load_addr#$BOARD\0"
 
 #include <asm/fsl_secure_boot.h>
-- 
cgit v1.3.1


From 160e2b88dfacc19de46098951a1961ab25115645 Mon Sep 17 00:00:00 2001
From: Priyanka Singh <priyanka.singh@nxp.com>
Date: Fri, 21 Feb 2020 05:57:03 +0530
Subject: armv8: ls1028a: Update secure boot headers offset

Update the secure boot headers offsets of Kernel and other
    firmware images for SD and XSPI boot sources used by
    esbc_validate command.

Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 include/configs/ls1028a_common.h | 8 ++++----
 include/configs/ls1028aqds.h     | 6 +++---
 2 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'include')

diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 1c7680c2347..818bd710c6f 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2019 NXP
+ * Copyright 2019-2020 NXP
  */
 
 #ifndef __L1028A_COMMON_H
@@ -91,14 +91,14 @@
 	"fdt_addr_r=0x90000000\0"               \
 	"ramdisk_addr_r=0xa0000000\0"           \
 	"kernel_start=0x1000000\0"		\
-	"kernelheader_start=0x800000\0"		\
+	"kernelheader_start=0x600000\0"		\
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
 	"kernelheader_size=0x40000\0"		\
 	"kernel_addr_sd=0x8000\0"		\
 	"kernel_size_sd=0x14000\0"		\
-	"kernelhdr_addr_sd=0x4000\0"		\
-	"kernelhdr_size_sd=0x10\0"		\
+	"kernelhdr_addr_sd=0x3000\0"		\
+	"kernelhdr_size_sd=0x20\0"		\
 	"console=ttyS0,115200\0"                \
 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"	\
 	BOOTENV					\
diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h
index fca0a3af190..977c5da4485 100644
--- a/include/configs/ls1028aqds.h
+++ b/include/configs/ls1028aqds.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2019 NXP
+ * Copyright 2019-2020 NXP
  */
 
 #ifndef __LS1028A_QDS_H
@@ -101,13 +101,13 @@
 	"fdt_addr_r=0x90000000\0" \
 	"ramdisk_addr_r=0xa0000000\0" \
 	"kernel_start=0x1000000\0" \
-	"kernelheader_start=0x800000\0" \
+	"kernelheader_start=0x600000\0" \
 	"kernel_load=0xa0000000\0" \
 	"kernel_size=0x2800000\0" \
 	"kernelheader_size=0x40000\0" \
 	"kernel_addr_sd=0x8000\0" \
 	"kernel_size_sd=0x14000\0" \
-	"kernelhdr_addr_sd=0x4000\0" \
+	"kernelhdr_addr_sd=0x3000\0" \
 	"kernelhdr_size_sd=0x10\0" \
 	"console=ttyS0,115200\0" \
 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
-- 
cgit v1.3.1


From 224899d273e1426cc18be317744be2c03798c41f Mon Sep 17 00:00:00 2001
From: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Date: Wed, 26 Feb 2020 16:46:48 +0530
Subject: lx2160a : Remove default VID setting

Set VID to 800 mV for Rev1 and set VID as per switch settings
for Rev2.

Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 board/freescale/lx2160a/lx2160a.c | 9 ++++++++-
 include/configs/lx2160aqds.h      | 1 -
 include/configs/lx2160ardb.h      | 1 -
 3 files changed, 8 insertions(+), 3 deletions(-)

(limited to 'include')

diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c
index 8e22689ec77..971c76bf504 100644
--- a/board/freescale/lx2160a/lx2160a.c
+++ b/board/freescale/lx2160a/lx2160a.c
@@ -278,7 +278,14 @@ int i2c_multiplexer_select_vid_channel(u8 channel)
 
 int init_func_vid(void)
 {
-	if (adjust_vdd(0) < 0)
+	int set_vid;
+
+	if (IS_SVR_REV(get_svr(), 1, 0))
+		set_vid = adjust_vdd(800);
+	else
+		set_vid = adjust_vdd(0);
+
+	if (set_vid < 0)
 		printf("core voltage not adjusted\n");
 
 	return 0;
diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h
index e9e1770c949..3dd071fa25a 100644
--- a/include/configs/lx2160aqds.h
+++ b/include/configs/lx2160aqds.h
@@ -121,7 +121,6 @@ u8 qixis_esdhc_detect_quirk(void);
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	EXTRA_ENV_SETTINGS			\
-	"lx2160aqds_vdd_mv=800\0"		\
 	"boot_scripts=lx2160aqds_boot.scr\0"	\
 	"boot_script_hdr=hdr_lx2160aqds_bs.out\0"	\
 	"BOARD=lx2160aqds\0"			\
diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h
index 63d77c5fc4a..f54edf356a2 100644
--- a/include/configs/lx2160ardb.h
+++ b/include/configs/lx2160ardb.h
@@ -93,7 +93,6 @@
 	EXTRA_ENV_SETTINGS			\
 	"boot_scripts=lx2160ardb_boot.scr\0"	\
 	"boot_script_hdr=hdr_lx2160ardb_bs.out\0"	\
-	"lx2160ardb_vdd_mv=800\0"		\
 	"BOARD=lx2160ardb\0"			\
 	"xspi_bootcmd=echo Trying load from flexspi..;"		\
 		"sf probe 0:0 && sf read $load_addr "		\
-- 
cgit v1.3.1


From 81d9e55097ee8c495a74ae3d2ffa7f182e2e1ef8 Mon Sep 17 00:00:00 2001
From: Yuantian Tang <andy.tang@nxp.com>
Date: Tue, 10 Mar 2020 11:31:05 +0800
Subject: armv8: ls1028a: add dhcp boot target device

Add DHCP boot target device to enable command bootcmd_dhcp.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 include/configs/ls1028a_common.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'include')

diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 818bd710c6f..2a38e9106e3 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -70,7 +70,8 @@
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
-	func(USB, usb, 0)
+	func(USB, usb, 0) \
+	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
 
 /* Initial environment variables */
-- 
cgit v1.3.1


From c5076a021eaa221e70b87fbf3a38744bf29419c3 Mon Sep 17 00:00:00 2001
From: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Date: Wed, 11 Mar 2020 20:51:47 +0530
Subject: lx2160a: Add dhcp in boot_targets

Add dhcp in supported boot_targets for lx2160.

Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 include/configs/lx2160a_common.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'include')

diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index fe0db770e86..7adb31d81d5 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -280,7 +280,8 @@ unsigned long get_board_ddr_clk(void);
 	func(USB, usb, 0) \
 	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
-	func(SCSI, scsi, 0)
+	func(SCSI, scsi, 0) \
+	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
 
 #endif /* __LX2_COMMON_H */
-- 
cgit v1.3.1


From 095b6be41ecf1cfef24d762ab9fdc062367ffeda Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Fri, 13 Mar 2020 10:26:29 +0800
Subject: include/configs: ls1012afrwy: fix load address of itb with bootm
 command

The old load address of itb will overwrite uboots reserved memory
on ls1012afrwy with 512 MiB ram

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 include/configs/ls1012afrwy.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include')

diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h
index dde4369c97c..6ea524c5bb7 100644
--- a/include/configs/ls1012afrwy.h
+++ b/include/configs/ls1012afrwy.h
@@ -65,7 +65,7 @@
 	"kernelheader_size=0x40000\0"		\
 	"kernel_addr_r=0x96000000\0"		\
 	"fdt_addr_r=0x90000000\0"		\
-	"load_addr=0x96000000\0"		\
+	"load_addr=0x92000000\0"		\
 	"kernel_size=0x2800000\0"		\
 	"kernelheader_size=0x40000\0"		\
 	"console=ttyS0,115200\0"		\
-- 
cgit v1.3.1


From 472dfe546c9c24c51f30763c2d232b9d12cf3719 Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Thu, 19 Mar 2020 19:38:42 +0800
Subject: configs: ls1088aqds: support distro boot

Add support of distro boot for ls1088aqds

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 include/configs/ls1088aqds.h | 63 +++++++++++++++++++++++++++++++++++---------
 1 file changed, 50 insertions(+), 13 deletions(-)

(limited to 'include')

diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 361c72fc8c9..4ac4a8d8568 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -443,19 +443,47 @@ unsigned long get_board_ddr_clk(void);
 	"mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"	\
 	"sf read 0x80100000 0xE00000 0x100000;" \
 	"fsl_mc start mc 0x80000000 0x80100000\0"	\
-	"mcmemsize=0x70000000 \0"
-#define QSPI_NOR_BOOTCOMMAND	"sf probe 0:0;" \
-				"sf read 0x80001000 0xd00000 0x100000;"\
-				" fsl_mc lazyapply dpl 0x80001000 &&" \
-				" sf read $kernel_load $kernel_start" \
-				" $kernel_size && bootm $kernel_load"
-#define SD_BOOTCOMMAND		"mmcinfo;mmc read 0x80001000 0x6800 0x800;"\
-				" fsl_mc lazyapply dpl 0x80001000 &&" \
-				" mmc read $kernel_load $kernel_start_sd" \
-				" $kernel_size_sd && bootm $kernel_load"
-#define IFC_NOR_BOOTCOMMAND	"fsl_mc lazyapply dpl 0x580d00000 &&" \
-				" cp.b $kernel_start $kernel_load" \
-				" $kernel_size && bootm $kernel_load"
+	"mcmemsize=0x70000000 \0"		\
+	"BOARD=ls1088aqds\0" \
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
+	BOOTENV					\
+	"boot_scripts=ls1088aqds_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1088aqds_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+		"part list ${devtype} ${devnum} devplist; "	\
+		"env exists devplist || setenv devplist 1; "	\
+		"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "			\
+				"${devnum}:${distro_bootpart} "	\
+				"bootfstype; then "		\
+				"run scan_dev_for_boot; "	\
+			"fi; "					\
+		"done\0"					\
+	"boot_a_script="					\
+		"load ${devtype} ${devnum}:${distro_bootpart} " \
+		"${scriptaddr} ${prefix}${script}; "		\
+	"env exists secureboot && load ${devtype} "		\
+		"${devnum}:${distro_bootpart} "			\
+		"${scripthdraddr} ${prefix}${boot_script_hdr}; "\
+		"env exists secureboot "			\
+		"&& esbc_validate ${scripthdraddr};"		\
+		"source ${scriptaddr}\0"			\
+	"qspi_bootcmd=echo Trying load from qspi..; " \
+		"sf probe 0:0; " \
+		"sf read 0x80001000 0xd00000 0x100000; " \
+		"fsl_mc lazyapply dpl 0x80001000 && " \
+		"sf read $kernel_load $kernel_start " \
+		"$kernel_size && bootm $kernel_load#$BOARD\0" \
+	"sd_bootcmd=echo Trying load from sd card..; " \
+		"mmcinfo;mmc read 0x80001000 0x6800 0x800; "\
+		"fsl_mc lazyapply dpl 0x80001000 && " \
+		"mmc read $kernel_load $kernel_start_sd " \
+		"$kernel_size_sd && bootm $kernel_load#$BOARD\0" \
+	"nor_bootcmd=echo Trying load from nor..; " \
+		"fsl_mc lazyapply dpl 0x580d00000 && " \
+		"cp.b $kernel_start $kernel_load " \
+		"$kernel_size && bootm $kernel_load#$BOARD\0"
 #else
 #if defined(CONFIG_QSPI_BOOT)
 #undef CONFIG_EXTRA_ENV_SETTINGS
@@ -510,6 +538,15 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_TFABOOT */
 #endif /* CONFIG_NXP_ESBC */
 
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#endif
+
 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_FSL_MEMAC
 #define	CONFIG_PHYLIB
-- 
cgit v1.3.1


From 1a9ce6e0df0e5463a8804f64b0b58621d981c289 Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Thu, 19 Mar 2020 20:01:07 +0800
Subject: configs: ls2080aqds: support distro boot

Add support of distro boot for ls2080aqds

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 include/configs/ls2080aqds.h | 34 ++++++++++++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

(limited to 'include')

diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 88da69f36f0..e93faab9a46 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -383,7 +383,30 @@ unsigned long get_board_ddr_clk(void);
 	"kernelheader_size=0x40000\0"		\
 	"BOARD=ls2088aqds\0" \
 	"mcmemsize=0x70000000 \0" \
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
 	IFC_MC_INIT_CMD				\
+	BOOTENV					\
+	"boot_scripts=ls2088aqds_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls2088aqds_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+		"part list ${devtype} ${devnum} devplist; "	\
+		"env exists devplist || setenv devplist 1; "	\
+		"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "			\
+				"${devnum}:${distro_bootpart} "	\
+				"bootfstype; then "		\
+				"run scan_dev_for_boot; "	\
+			"fi; "					\
+		"done\0"					\
+	"boot_a_script="					\
+		"load ${devtype} ${devnum}:${distro_bootpart} "	\
+			"${scriptaddr} ${prefix}${script}; "	\
+		"env exists secureboot && load ${devtype} "	\
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} "	\
+			"&& esbc_validate ${scripthdraddr};"	\
+		"source ${scriptaddr}\0"			\
 	"nor_bootcmd=echo Trying load from nor..;"		\
 		"cp.b $kernel_addr $load_addr "			\
 		"$kernel_size ; env exists secureboot && "	\
@@ -429,6 +452,13 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_NXP_ESBC */
 
 #ifdef CONFIG_TFABOOT
+#define BOOT_TARGET_DEVICES(func) \
+	func(USB, usb, 0) \
+	func(MMC, mmc, 0) \
+	func(SCSI, scsi, 0) \
+	func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+
 #define SD_BOOTCOMMAND						\
 			"env exists mcinitcmd && env exists secureboot "\
 			"&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \
@@ -436,14 +466,14 @@ unsigned long get_board_ddr_clk(void);
 			"env exists mcinitcmd && run mcinitcmd "	\
 			"&& mmc read 0x80d00000 0x6800 0x800 "		\
 			"&& fsl_mc lazyapply dpl 0x80d00000; "		\
-			"run sd_bootcmd; "		\
+			"run distro_bootcmd;run sd_bootcmd; "		\
 			"env exists secureboot && esbc_halt;"
 
 #define IFC_NOR_BOOTCOMMAND						\
 			"env exists mcinitcmd && env exists secureboot "\
 			"&& esbc_validate 0x5806C0000; env exists mcinitcmd "\
 			"&& fsl_mc lazyapply dpl 0x580d00000;"		\
-			"run nor_bootcmd; "		\
+			"run distro_bootcmd;run nor_bootcmd; "		\
 			"env exists secureboot && esbc_halt;"
 #endif
 
-- 
cgit v1.3.1


From 40ef9d16975ddfe502ab8db70336dd0fc0f13607 Mon Sep 17 00:00:00 2001
From: Yuantian Tang <andy.tang@nxp.com>
Date: Fri, 20 Mar 2020 14:37:06 +0800
Subject: armv8: ls1028aqds: add some environments

Add sd and emmc bootcmd environments to facilitate
the boot process.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 include/configs/ls1028aqds.h | 39 ++++++++++++++++++++++++++++-----------
 1 file changed, 28 insertions(+), 11 deletions(-)

(limited to 'include')

diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h
index 977c5da4485..818b994b907 100644
--- a/include/configs/ls1028aqds.h
+++ b/include/configs/ls1028aqds.h
@@ -99,6 +99,7 @@
 	"load_addr=0xa0000000\0" \
 	"kernel_addr_r=0x81000000\0" \
 	"fdt_addr_r=0x90000000\0" \
+	"fdt2_addr_r=0x90010000\0" \
 	"ramdisk_addr_r=0xa0000000\0" \
 	"kernel_start=0x1000000\0" \
 	"kernelheader_start=0x600000\0" \
@@ -139,19 +140,35 @@
 			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
 			"&& esbc_validate ${scripthdraddr};" \
 		"source ${scriptaddr}\0" \
-	"sd_bootcmd=echo Trying load from SD ..;" \
-		"mmcinfo; mmc read $load_addr " \
-		"$kernel_addr_sd $kernel_size_sd && " \
+	"xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+		"sf probe 0:0 && sf read $load_addr " \
+		"$kernel_start $kernel_size ; env exists secureboot &&" \
+		"sf read $kernelheader_addr_r $kernelheader_start " \
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+		" bootm $load_addr#$board\0" \
+	"xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+		"sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+		"&& hdp load $load_addr 0x2000\0"			\
+	"sd_bootcmd=echo Trying load from SD ...;" \
+		"mmc dev 0; mmcinfo; mmc read $load_addr "		\
+		"$kernel_addr_sd $kernel_size_sd && "	\
 		"env exists secureboot && mmc read $kernelheader_addr_r " \
-		"$kernelhdr_addr_sd $kernelhdr_size_sd " \
-		" && esbc_validate ${kernelheader_addr_r};" \
-		"bootm $load_addr#$board\0" \
-	"emmc_bootcmd=echo Trying load from EMMC ..;" \
-		"mmcinfo; mmc dev 1; mmc read $load_addr " \
-		"$kernel_addr_sd $kernel_size_sd && " \
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$board\0"		\
+	"sd_hdploadcmd=echo Trying load HDP firmware from SD..;"        \
+		"mmc dev 0;mmcinfo; mmc read $load_addr 0x4a00 0x200 "	\
+		"&& hdp load $load_addr 0x2000\0"	\
+	"emmc_bootcmd=echo Trying load from EMMC ..;"	\
+		"mmc dev 1; mmcinfo; mmc read $load_addr "		\
+		"$kernel_addr_sd $kernel_size_sd && "	\
 		"env exists secureboot && mmc read $kernelheader_addr_r " \
-		"$kernelhdr_addr_sd $kernelhdr_size_sd " \
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
 		" && esbc_validate ${kernelheader_addr_r};"	\
-		"bootm $load_addr#$board\0"
+		"bootm $load_addr#$board\0"			\
+	"emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
+		"mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 "	\
+		"&& hdp load $load_addr 0x2000\0"
+
 #endif
 #endif /* __LS1028A_QDS_H */
-- 
cgit v1.3.1


From a023c3c2c8eb7afa7b1f0cea2690d9b02cf4cb1b Mon Sep 17 00:00:00 2001
From: Yuantian Tang <andy.tang@nxp.com>
Date: Fri, 20 Mar 2020 14:37:07 +0800
Subject: armv8: ls1028a: clean up the environment variables

Move the environment variables from command head file to
ls1028ardb specific head file so that they will not mess
up with ls1028aqds board.
Also updated some variable slightly.
There is no function change by this patch.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 include/configs/ls1028a_common.h | 86 ---------------------------------------
 include/configs/ls1028ardb.h     | 88 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 88 insertions(+), 86 deletions(-)

(limited to 'include')

diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 2a38e9106e3..6905694d102 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -74,92 +74,6 @@
 	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
 
-/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"board=ls1028ardb\0"			\
-	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
-	"ramdisk_addr=0x800000\0"		\
-	"ramdisk_size=0x2000000\0"		\
-	"bootm_size=0x10000000\0"		\
-	"fdt_addr=0x00f00000\0"                 \
-	"kernel_addr=0x01000000\0"              \
-	"scriptaddr=0x80000000\0"               \
-	"scripthdraddr=0x80080000\0"		\
-	"fdtheader_addr_r=0x80100000\0"         \
-	"kernelheader_addr_r=0x80200000\0"      \
-	"load_addr=0xa0000000\0"            \
-	"kernel_addr_r=0x81000000\0"            \
-	"fdt_addr_r=0x90000000\0"               \
-	"ramdisk_addr_r=0xa0000000\0"           \
-	"kernel_start=0x1000000\0"		\
-	"kernelheader_start=0x600000\0"		\
-	"kernel_load=0xa0000000\0"		\
-	"kernel_size=0x2800000\0"		\
-	"kernelheader_size=0x40000\0"		\
-	"kernel_addr_sd=0x8000\0"		\
-	"kernel_size_sd=0x14000\0"		\
-	"kernelhdr_addr_sd=0x3000\0"		\
-	"kernelhdr_size_sd=0x20\0"		\
-	"console=ttyS0,115200\0"                \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"	\
-	BOOTENV					\
-	"boot_scripts=ls1028ardb_boot.scr\0"    \
-	"boot_script_hdr=hdr_ls1028ardb_bs.out\0"	\
-	"scan_dev_for_boot_part="               \
-		"part list ${devtype} ${devnum} devplist; "   \
-		"env exists devplist || setenv devplist 1; "  \
-		"for distro_bootpart in ${devplist}; do "     \
-		  "if fstype ${devtype} "                  \
-			"${devnum}:${distro_bootpart} "      \
-			"bootfstype; then "                  \
-			"run scan_dev_for_boot; "            \
-		  "fi; "                                   \
-		"done\0"                                   \
-	"scan_dev_for_boot="				  \
-		"echo Scanning ${devtype} "		  \
-				"${devnum}:${distro_bootpart}...; "  \
-		"for prefix in ${boot_prefixes}; do "	  \
-			"run scan_dev_for_scripts; "	  \
-		"done;"					  \
-		"\0"					  \
-	"boot_a_script="				  \
-		"load ${devtype} ${devnum}:${distro_bootpart} "  \
-			"${scriptaddr} ${prefix}${script}; "    \
-		"env exists secureboot && load ${devtype} "     \
-			"${devnum}:${distro_bootpart} "		\
-			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
-			"&& esbc_validate ${scripthdraddr};"    \
-		"source ${scriptaddr}\0"	  \
-	"xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
-		"sf probe 0:0 && sf read $load_addr " \
-		"$kernel_start $kernel_size ; env exists secureboot &&" \
-		"sf read $kernelheader_addr_r $kernelheader_start " \
-		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
-		" bootm $load_addr#$board\0" \
-	"xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
-		"sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
-		"&& hdp load $load_addr 0x2000\0"			\
-	"sd_bootcmd=echo Trying load from SD ...;" \
-		"mmcinfo; mmc read $load_addr "		\
-		"$kernel_addr_sd $kernel_size_sd && "	\
-		"env exists secureboot && mmc read $kernelheader_addr_r " \
-		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
-		" && esbc_validate ${kernelheader_addr_r};"	\
-		"bootm $load_addr#$board\0"		\
-	"sd_hdploadcmd=echo Trying load HDP firmware from SD..;"        \
-		"mmcinfo;mmc read $load_addr 0x4a00 0x200 "             \
-		"&& hdp load $load_addr 0x2000\0"	\
-	"emmc_bootcmd=echo Trying load from EMMC ..;"	\
-		"mmcinfo; mmc dev 1; mmc read $load_addr "		\
-		"$kernel_addr_sd $kernel_size_sd && "	\
-		"env exists secureboot && mmc read $kernelheader_addr_r " \
-		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
-		" && esbc_validate ${kernelheader_addr_r};"	\
-		"bootm $load_addr#$board\0"			\
-	"emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
-		"mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 "	\
-		"&& hdp load $load_addr 0x2000\0"
-
 #undef CONFIG_BOOTCOMMAND
 
 #define XSPI_NOR_BOOTCOMMAND	\
diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h
index a4c3d73d2a1..0f289cb0780 100644
--- a/include/configs/ls1028ardb.h
+++ b/include/configs/ls1028ardb.h
@@ -72,4 +72,92 @@
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SATA1                        AHCI_BASE_ADDR1
 
+/* Initial environment variables */
+#ifndef SPL_NO_ENV
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"board=ls1028ardb\0"			\
+	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
+	"ramdisk_addr=0x800000\0"		\
+	"ramdisk_size=0x2000000\0"		\
+	"bootm_size=0x10000000\0"		\
+	"fdt_addr=0x00f00000\0"                 \
+	"kernel_addr=0x01000000\0"              \
+	"scriptaddr=0x80000000\0"               \
+	"scripthdraddr=0x80080000\0"		\
+	"fdtheader_addr_r=0x80100000\0"         \
+	"kernelheader_addr_r=0x80200000\0"      \
+	"load_addr=0xa0000000\0"            \
+	"kernel_addr_r=0x81000000\0"            \
+	"fdt_addr_r=0x90000000\0"               \
+	"ramdisk_addr_r=0xa0000000\0"           \
+	"kernel_start=0x1000000\0"		\
+	"kernelheader_start=0x600000\0"		\
+	"kernel_load=0xa0000000\0"		\
+	"kernel_size=0x2800000\0"		\
+	"kernelheader_size=0x40000\0"		\
+	"kernel_addr_sd=0x8000\0"		\
+	"kernel_size_sd=0x14000\0"		\
+	"kernelhdr_addr_sd=0x3000\0"		\
+	"kernelhdr_size_sd=0x20\0"		\
+	"console=ttyS0,115200\0"                \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"	\
+	BOOTENV					\
+	"boot_scripts=ls1028ardb_boot.scr\0"    \
+	"boot_script_hdr=hdr_ls1028ardb_bs.out\0"	\
+	"scan_dev_for_boot_part="               \
+		"part list ${devtype} ${devnum} devplist; "   \
+		"env exists devplist || setenv devplist 1; "  \
+		"for distro_bootpart in ${devplist}; do "     \
+		  "if fstype ${devtype} "                  \
+			"${devnum}:${distro_bootpart} "      \
+			"bootfstype; then "                  \
+			"run scan_dev_for_boot; "            \
+		  "fi; "                                   \
+		"done\0"                                   \
+	"scan_dev_for_boot="				  \
+		"echo Scanning ${devtype} "		  \
+				"${devnum}:${distro_bootpart}...; "  \
+		"for prefix in ${boot_prefixes}; do "	  \
+			"run scan_dev_for_scripts; "	  \
+		"done;"					  \
+		"\0"					  \
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
+	"xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+		"sf probe 0:0 && sf read $load_addr " \
+		"$kernel_start $kernel_size ; env exists secureboot &&" \
+		"sf read $kernelheader_addr_r $kernelheader_start " \
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+		" bootm $load_addr#$board\0" \
+	"xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+		"sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+		"&& hdp load $load_addr 0x2000\0"			\
+	"sd_bootcmd=echo Trying load from SD ...;" \
+		"mmc dev 0;mmcinfo; mmc read $load_addr "		\
+		"$kernel_addr_sd $kernel_size_sd && "	\
+		"env exists secureboot && mmc read $kernelheader_addr_r " \
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$board\0"		\
+	"sd_hdploadcmd=echo Trying load HDP firmware from SD..;"	\
+		"mmc dev 0;mmcinfo;mmc read $load_addr 0x4a00 0x200 "	\
+		"&& hdp load $load_addr 0x2000\0"	\
+	"emmc_bootcmd=echo Trying load from EMMC ..;"	\
+		"mmc dev 1;mmcinfo; mmc read $load_addr "		\
+		"$kernel_addr_sd $kernel_size_sd && "	\
+		"env exists secureboot && mmc read $kernelheader_addr_r " \
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$board\0"			\
+	"emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
+		"mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 "	\
+		"&& hdp load $load_addr 0x2000\0"
+#endif
 #endif /* __LS1028A_RDB_H */
-- 
cgit v1.3.1


From c8a7cadc81a064f1d00bb3255ee64a687ac73ebe Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Fri, 20 Mar 2020 17:05:51 +0800
Subject: configs: ls1012afrwy: fix wrong env of board

Fix wrong environment variable of board for ls1012afrwy

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 include/configs/ls1012afrwy.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'include')

diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h
index 6ea524c5bb7..44b467aca54 100644
--- a/include/configs/ls1012afrwy.h
+++ b/include/configs/ls1012afrwy.h
@@ -8,6 +8,9 @@
 
 #include "ls1012a_common.h"
 
+#undef CONFIG_SYS_BOARD
+#define CONFIG_SYS_BOARD "ls1012afrwy"
+
 /* Board Rev*/
 #define BOARD_REV_A_B			0x0
 #define BOARD_REV_C			0x00080000
-- 
cgit v1.3.1


From fefac937fbd87f380042501c63b874994b3dccee Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Wed, 5 Feb 2020 22:02:16 +0800
Subject: dm: arm64: ls1043a: add i2c DM support

This supports i2c DM and enables CONFIG_DM_I2C
for SoC LS1043A

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 arch/arm/cpu/armv8/fsl-layerscape/Kconfig       | 10 +--
 arch/arm/include/asm/gpio.h                     |  3 +-
 board/freescale/ls1043aqds/ls1043aqds.c         | 98 +++++++++++++++++++++++--
 configs/ls1043aqds_defconfig                    |  2 +
 configs/ls1043aqds_lpuart_defconfig             |  2 +
 configs/ls1043aqds_nand_defconfig               |  2 +
 configs/ls1043aqds_nor_ddr3_defconfig           |  2 +
 configs/ls1043aqds_qspi_defconfig               |  2 +
 configs/ls1043aqds_sdcard_ifc_defconfig         |  2 +
 configs/ls1043aqds_sdcard_qspi_defconfig        |  2 +
 configs/ls1043aqds_tfa_SECURE_BOOT_defconfig    |  2 +
 configs/ls1043aqds_tfa_defconfig                |  2 +
 configs/ls1043ardb_SECURE_BOOT_defconfig        |  2 +
 configs/ls1043ardb_defconfig                    |  2 +
 configs/ls1043ardb_nand_SECURE_BOOT_defconfig   |  2 +
 configs/ls1043ardb_nand_defconfig               |  2 +
 configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig |  2 +
 configs/ls1043ardb_sdcard_defconfig             |  2 +
 configs/ls1043ardb_tfa_SECURE_BOOT_defconfig    |  2 +
 configs/ls1043ardb_tfa_defconfig                |  2 +
 include/configs/ls1043a_common.h                | 11 +++
 21 files changed, 144 insertions(+), 12 deletions(-)

(limited to 'include')

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 275c66d9929..760053e4012 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -74,11 +74,11 @@ config ARCH_LS1043A
 	select SYS_FSL_HAS_DDR4
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
-	select SYS_I2C_MXC
-	select SYS_I2C_MXC_I2C1
-	select SYS_I2C_MXC_I2C2
-	select SYS_I2C_MXC_I2C3
-	select SYS_I2C_MXC_I2C4
+	select SYS_I2C_MXC if !DM_I2C
+	select SYS_I2C_MXC_I2C1 if !DM_I2C
+	select SYS_I2C_MXC_I2C2 if !DM_I2C
+	select SYS_I2C_MXC_I2C3 if !DM_I2C
+	select SYS_I2C_MXC_I2C4 if !DM_I2C
 	imply CMD_PCI
 
 config ARCH_LS1046A
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 84e5cb46e5a..5d6b269deda 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -4,7 +4,8 @@
 	!defined(CONFIG_ARCH_ROCKCHIP) && !defined(CONFIG_ARCH_LX2160A) && \
 	!defined(CONFIG_ARCH_LS1028A) && !defined(CONFIG_ARCH_LS2080A) && \
 	!defined(CONFIG_ARCH_LS1088A) && !defined(CONFIG_ARCH_ASPEED) && \
-	!defined(CONFIG_ARCH_LS1012A) && !defined(CONFIG_ARCH_U8500) && \
+	!defined(CONFIG_ARCH_LS1012A) && !defined(CONFIG_ARCH_LS1043A) && \
+	!defined(CONFIG_ARCH_U8500) && \
 	!defined(CONFIG_CORTINA_PLATFORM)
 #include <asm/arch/gpio.h>
 #endif
diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c
index 8c96b962b78..2d4b18cdbcb 100644
--- a/board/freescale/ls1043aqds/ls1043aqds.c
+++ b/board/freescale/ls1043aqds/ls1043aqds.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2019 NXP
  */
 
 #include <common.h>
@@ -271,11 +272,24 @@ unsigned long get_board_ddr_clk(void)
 	return 66666666;
 }
 
-int select_i2c_ch_pca9547(u8 ch)
+int select_i2c_ch_pca9547(u8 ch, int bus_num)
 {
 	int ret;
 
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return ret;
+	}
+	ret = dm_i2c_write(dev, 0, &ch, 1);
+#else
 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
 	if (ret) {
 		puts("PCA: failed to select proper channel\n");
 		return ret;
@@ -290,8 +304,10 @@ int dram_init(void)
 	 * When resuming from deep sleep, the I2C channel may not be
 	 * in the default channel. So, switch to the default channel
 	 * before accessing DDR SPD.
+	 *
+	 * PCA9547 mount on I2C1 bus
 	 */
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 	fsl_initdram();
 #if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \
 	defined(CONFIG_SPL_BUILD)
@@ -304,16 +320,83 @@ int dram_init(void)
 
 int i2c_multiplexer_select_vid_channel(u8 channel)
 {
-	return select_i2c_ch_pca9547(channel);
+	return select_i2c_ch_pca9547(channel, 0);
 }
 
 void board_retimer_init(void)
 {
 	u8 reg;
+	int bus_num = 0;
 
 	/* Retimer is connected to I2C1_CH7_CH5 */
-	select_i2c_ch_pca9547(I2C_MUX_CH7);
+	select_i2c_ch_pca9547(I2C_MUX_CH7, bus_num);
 	reg = I2C_MUX_CH5;
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
+	int ret;
+
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_SEC,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return;
+	}
+	dm_i2c_write(dev, 0, &reg, 1);
+
+	/* Access to Control/Shared register */
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_RETIMER_ADDR,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return;
+	}
+
+	reg = 0x0;
+	dm_i2c_write(dev, 0xff, &reg, 1);
+
+	/* Read device revision and ID */
+	dm_i2c_read(dev, 1, &reg, 1);
+	debug("Retimer version id = 0x%x\n", reg);
+
+	/* Enable Broadcast. All writes target all channel register sets */
+	reg = 0x0c;
+	dm_i2c_write(dev, 0xff, &reg, 1);
+
+	/* Reset Channel Registers */
+	dm_i2c_read(dev, 0, &reg, 1);
+	reg |= 0x4;
+	dm_i2c_write(dev, 0, &reg, 1);
+
+	/* Enable override divider select and Enable Override Output Mux */
+	dm_i2c_read(dev, 9, &reg, 1);
+	reg |= 0x24;
+	dm_i2c_write(dev, 9, &reg, 1);
+
+	/* Select VCO Divider to full rate (000) */
+	dm_i2c_read(dev, 0x18, &reg, 1);
+	reg &= 0x8f;
+	dm_i2c_write(dev, 0x18, &reg, 1);
+
+	/* Selects active PFD MUX Input as Re-timed Data (001) */
+	dm_i2c_read(dev, 0x1e, &reg, 1);
+	reg &= 0x3f;
+	reg |= 0x20;
+	dm_i2c_write(dev, 0x1e, &reg, 1);
+
+	/* Set data rate as 10.3125 Gbps */
+	reg = 0x0;
+	dm_i2c_write(dev, 0x60, &reg, 1);
+	reg = 0xb2;
+	dm_i2c_write(dev, 0x61, &reg, 1);
+	reg = 0x90;
+	dm_i2c_write(dev, 0x62, &reg, 1);
+	reg = 0xb3;
+	dm_i2c_write(dev, 0x63, &reg, 1);
+	reg = 0xcd;
+	dm_i2c_write(dev, 0x64, &reg, 1);
+#else
 	i2c_write(I2C_MUX_PCA_ADDR_SEC, 0, 1, &reg, 1);
 
 	/* Access to Control/Shared register */
@@ -360,9 +443,10 @@ void board_retimer_init(void)
 	i2c_write(I2C_RETIMER_ADDR, 0x63, 1, &reg, 1);
 	reg = 0xcd;
 	i2c_write(I2C_RETIMER_ADDR, 0x64, 1, &reg, 1);
+#endif
 
 	/* Return the default channel */
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, bus_num);
 }
 
 int board_early_init_f(void)
@@ -375,8 +459,10 @@ int board_early_init_f(void)
 	u8 uart;
 #endif
 
+#ifdef CONFIG_SYS_I2C
 #ifdef CONFIG_SYS_I2C_EARLY_INIT
 	i2c_early_init_f();
+#endif
 #endif
 	fsl_lsch2_early_init_f();
 
@@ -457,7 +543,7 @@ int board_init(void)
 	erratum_a010315();
 #endif
 
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 	board_retimer_init();
 
 #ifdef CONFIG_SYS_FSL_SERDES
diff --git a/configs/ls1043aqds_defconfig b/configs/ls1043aqds_defconfig
index 2885552ef34..93b86af6074 100644
--- a/configs/ls1043aqds_defconfig
+++ b/configs/ls1043aqds_defconfig
@@ -62,3 +62,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig
index 9d9229ac03a..f89c2ee3a4f 100644
--- a/configs/ls1043aqds_lpuart_defconfig
+++ b/configs/ls1043aqds_lpuart_defconfig
@@ -64,3 +64,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig
index c45eaea02a5..a169bfef8f6 100644
--- a/configs/ls1043aqds_nand_defconfig
+++ b/configs/ls1043aqds_nand_defconfig
@@ -78,3 +78,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_nor_ddr3_defconfig b/configs/ls1043aqds_nor_ddr3_defconfig
index 8d28fe1baff..01d0af30b17 100644
--- a/configs/ls1043aqds_nor_ddr3_defconfig
+++ b/configs/ls1043aqds_nor_ddr3_defconfig
@@ -63,3 +63,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_qspi_defconfig b/configs/ls1043aqds_qspi_defconfig
index 86b2eb56b84..65eff7c40b8 100644
--- a/configs/ls1043aqds_qspi_defconfig
+++ b/configs/ls1043aqds_qspi_defconfig
@@ -58,3 +58,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig
index bf3f0d09909..c5042a345d7 100644
--- a/configs/ls1043aqds_sdcard_ifc_defconfig
+++ b/configs/ls1043aqds_sdcard_ifc_defconfig
@@ -79,3 +79,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_sdcard_qspi_defconfig b/configs/ls1043aqds_sdcard_qspi_defconfig
index 0449469b895..12706a48dc8 100644
--- a/configs/ls1043aqds_sdcard_qspi_defconfig
+++ b/configs/ls1043aqds_sdcard_qspi_defconfig
@@ -72,3 +72,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
index 0ece698350d..b7335bcd335 100644
--- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
@@ -63,3 +63,5 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_tfa_defconfig b/configs/ls1043aqds_tfa_defconfig
index 24db72a39d2..6e594ed07c6 100644
--- a/configs/ls1043aqds_tfa_defconfig
+++ b/configs/ls1043aqds_tfa_defconfig
@@ -71,3 +71,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig
index 5e030e2586d..153a62866ff 100644
--- a/configs/ls1043ardb_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_SECURE_BOOT_defconfig
@@ -55,3 +55,5 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig
index 0676cbccdd6..d1e534388b9 100644
--- a/configs/ls1043ardb_defconfig
+++ b/configs/ls1043ardb_defconfig
@@ -55,3 +55,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
index 1f4c5705d58..252c7c8313a 100644
--- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
@@ -75,3 +75,5 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig
index e7fe2de309f..de18aaa0635 100644
--- a/configs/ls1043ardb_nand_defconfig
+++ b/configs/ls1043ardb_nand_defconfig
@@ -74,3 +74,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 # CONFIG_SPL_USE_TINY_PRINTF is not set
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
index 6529c7334c1..149b25ffe52 100644
--- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
@@ -74,3 +74,5 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig
index 228262477cd..b386fc668cc 100644
--- a/configs/ls1043ardb_sdcard_defconfig
+++ b/configs/ls1043ardb_sdcard_defconfig
@@ -73,3 +73,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 # CONFIG_SPL_USE_TINY_PRINTF is not set
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
index 94ca502f3b5..36eb0fcff72 100644
--- a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
@@ -56,3 +56,5 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_tfa_defconfig b/configs/ls1043ardb_tfa_defconfig
index 4154075986c..eaddbca79f8 100644
--- a/configs/ls1043ardb_tfa_defconfig
+++ b/configs/ls1043ardb_tfa_defconfig
@@ -59,3 +59,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index bf24d4036d2..985f40412c6 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2015 Freescale Semiconductor
+ * Copyright (C) 2019 NXP
  */
 
 #ifndef __LS1043A_COMMON_H
@@ -141,7 +142,17 @@
 #endif
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_MXC_I2C4		/* enable I2C bus 4 */
+#else
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
+#endif
 
 /* PCIe */
 #ifndef SPL_NO_PCIE
-- 
cgit v1.3.1


From bb1165f900088c796e254cc99c8f81d47e3d57c9 Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Wed, 5 Feb 2020 22:02:17 +0800
Subject: dm: arm64: ls1046a: add i2c DM support

This supports i2c DM and enables CONFIG_DM_I2C
for SoC LS1046A

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 arch/arm/cpu/armv8/fsl-layerscape/Kconfig       | 10 +++---
 arch/arm/dts/fsl-ls1046a-frwy.dts               |  3 ++
 arch/arm/dts/fsl-ls1046a-qds.dtsi               |  4 +++
 arch/arm/dts/fsl-ls1046a-rdb.dts                |  8 +++++
 arch/arm/include/asm/gpio.h                     |  2 +-
 board/freescale/ls1046afrwy/ls1046afrwy.c       | 17 +++++++--
 board/freescale/ls1046aqds/ls1046aqds.c         | 25 +++++++++++---
 configs/ls1046afrwy_tfa_defconfig               |  2 ++
 configs/ls1046aqds_SECURE_BOOT_defconfig        |  2 ++
 configs/ls1046aqds_defconfig                    |  2 ++
 configs/ls1046aqds_lpuart_defconfig             |  2 ++
 configs/ls1046aqds_nand_defconfig               |  2 ++
 configs/ls1046aqds_qspi_defconfig               |  2 ++
 configs/ls1046aqds_sdcard_ifc_defconfig         |  2 ++
 configs/ls1046aqds_sdcard_qspi_defconfig        |  2 ++
 configs/ls1046aqds_tfa_SECURE_BOOT_defconfig    |  2 ++
 configs/ls1046aqds_tfa_defconfig                |  2 ++
 configs/ls1046ardb_emmc_defconfig               |  2 ++
 configs/ls1046ardb_qspi_SECURE_BOOT_defconfig   |  2 ++
 configs/ls1046ardb_qspi_defconfig               |  2 ++
 configs/ls1046ardb_qspi_spl_defconfig           |  2 ++
 configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig |  2 ++
 configs/ls1046ardb_sdcard_defconfig             |  2 ++
 configs/ls1046ardb_tfa_SECURE_BOOT_defconfig    |  2 ++
 configs/ls1046ardb_tfa_defconfig                |  2 ++
 drivers/power/power_i2c.c                       | 46 +++++++++++++++++++++++--
 include/configs/ls1046a_common.h                | 11 ++++++
 27 files changed, 148 insertions(+), 14 deletions(-)

(limited to 'include')

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 760053e4012..b25639183f8 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -107,11 +107,11 @@ config ARCH_LS1046A
 	select SYS_FSL_SRDS_2
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
-	select SYS_I2C_MXC
-	select SYS_I2C_MXC_I2C1
-	select SYS_I2C_MXC_I2C2
-	select SYS_I2C_MXC_I2C3
-	select SYS_I2C_MXC_I2C4
+	select SYS_I2C_MXC if !DM_I2C
+	select SYS_I2C_MXC_I2C1 if !DM_I2C
+	select SYS_I2C_MXC_I2C2 if !DM_I2C
+	select SYS_I2C_MXC_I2C3 if !DM_I2C
+	select SYS_I2C_MXC_I2C4 if !DM_I2C
 	imply SCSI
 	imply SCSI_AHCI
 
diff --git a/arch/arm/dts/fsl-ls1046a-frwy.dts b/arch/arm/dts/fsl-ls1046a-frwy.dts
index 3d41e3bd44f..d39159322a5 100644
--- a/arch/arm/dts/fsl-ls1046a-frwy.dts
+++ b/arch/arm/dts/fsl-ls1046a-frwy.dts
@@ -32,3 +32,6 @@
 
 };
 
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1046a-qds.dtsi b/arch/arm/dts/fsl-ls1046a-qds.dtsi
index c95f44fc361..76dc397328a 100644
--- a/arch/arm/dts/fsl-ls1046a-qds.dtsi
+++ b/arch/arm/dts/fsl-ls1046a-qds.dtsi
@@ -80,3 +80,7 @@
 &sata {
 	status = "okay";
 };
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1046a-rdb.dts b/arch/arm/dts/fsl-ls1046a-rdb.dts
index a05c9e9b9ea..83e34ab02ad 100644
--- a/arch/arm/dts/fsl-ls1046a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1046a-rdb.dts
@@ -43,3 +43,11 @@
 &sata {
 	status = "okay";
 };
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 5d6b269deda..333e407b666 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -5,7 +5,7 @@
 	!defined(CONFIG_ARCH_LS1028A) && !defined(CONFIG_ARCH_LS2080A) && \
 	!defined(CONFIG_ARCH_LS1088A) && !defined(CONFIG_ARCH_ASPEED) && \
 	!defined(CONFIG_ARCH_LS1012A) && !defined(CONFIG_ARCH_LS1043A) && \
-	!defined(CONFIG_ARCH_U8500) && \
+	!defined(CONFIG_ARCH_LS1046A) && !defined(CONFIG_ARCH_U8500) && \
 	!defined(CONFIG_CORTINA_PLATFORM)
 #include <asm/arch/gpio.h>
 #endif
diff --git a/board/freescale/ls1046afrwy/ls1046afrwy.c b/board/freescale/ls1046afrwy/ls1046afrwy.c
index db8b3a5b921..8c0abb63a9d 100644
--- a/board/freescale/ls1046afrwy/ls1046afrwy.c
+++ b/board/freescale/ls1046afrwy/ls1046afrwy.c
@@ -36,11 +36,24 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-int select_i2c_ch_pca9547(u8 ch)
+int select_i2c_ch_pca9547(u8 ch, int bus_num)
 {
 	int ret;
 
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return ret;
+	}
+	ret = dm_i2c_write(dev, 0, &ch, 1);
+#else
 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
 	if (ret) {
 		puts("PCA: failed to select proper channel\n");
 		return ret;
@@ -149,7 +162,7 @@ val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
 	sec_init();
 #endif
 
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 	return 0;
 }
 
diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c
index aac5d9aa848..cabd7ee648c 100644
--- a/board/freescale/ls1046aqds/ls1046aqds.c
+++ b/board/freescale/ls1046aqds/ls1046aqds.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2019 NXP
  */
 
 #include <common.h>
@@ -269,11 +270,23 @@ u32 get_lpuart_clk(void)
 }
 #endif
 
-int select_i2c_ch_pca9547(u8 ch)
+int select_i2c_ch_pca9547(u8 ch, int bus_num)
 {
 	int ret;
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
 
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return ret;
+	}
+	ret = dm_i2c_write(dev, 0, &ch, 1);
+#else
 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
 	if (ret) {
 		puts("PCA: failed to select proper channel\n");
 		return ret;
@@ -288,8 +301,10 @@ int dram_init(void)
 	 * When resuming from deep sleep, the I2C channel may not be
 	 * in the default channel. So, switch to the default channel
 	 * before accessing DDR SPD.
+	 *
+	 * PCA9547 mount on I2C1 bus
 	 */
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 	fsl_initdram();
 #if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \
 	defined(CONFIG_SPL_BUILD)
@@ -302,7 +317,7 @@ int dram_init(void)
 
 int i2c_multiplexer_select_vid_channel(u8 channel)
 {
-	return select_i2c_ch_pca9547(channel);
+	return select_i2c_ch_pca9547(channel, 0);
 }
 
 int board_early_init_f(void)
@@ -315,8 +330,10 @@ int board_early_init_f(void)
 	u8 uart;
 #endif
 
+#ifdef CONFIG_SYS_I2C
 #ifdef CONFIG_SYS_I2C_EARLY_INIT
 	i2c_early_init_f();
+#endif
 #endif
 	fsl_lsch2_early_init_f();
 
@@ -394,7 +411,7 @@ int misc_init_r(void)
 
 int board_init(void)
 {
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 
 #ifdef CONFIG_SYS_FSL_SERDES
 	config_serdes_mux();
diff --git a/configs/ls1046afrwy_tfa_defconfig b/configs/ls1046afrwy_tfa_defconfig
index 2c258785d1e..616984f7d75 100644
--- a/configs/ls1046afrwy_tfa_defconfig
+++ b/configs/ls1046afrwy_tfa_defconfig
@@ -62,3 +62,5 @@ CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_ASIX88179=y
 CONFIG_USB_ETHER_RTL8152=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig
index 6ea27c7ba42..ed25b7a680b 100644
--- a/configs/ls1046aqds_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_SECURE_BOOT_defconfig
@@ -60,3 +60,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig
index 04c1176d858..0a50bb14c02 100644
--- a/configs/ls1046aqds_defconfig
+++ b/configs/ls1046aqds_defconfig
@@ -62,3 +62,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig
index b0a24f297ee..17d1685081f 100644
--- a/configs/ls1046aqds_lpuart_defconfig
+++ b/configs/ls1046aqds_lpuart_defconfig
@@ -64,3 +64,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig
index 3ffe6a6ef9c..0bafcbe168d 100644
--- a/configs/ls1046aqds_nand_defconfig
+++ b/configs/ls1046aqds_nand_defconfig
@@ -70,3 +70,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig
index d6253c790a5..ff0fd45c9ec 100644
--- a/configs/ls1046aqds_qspi_defconfig
+++ b/configs/ls1046aqds_qspi_defconfig
@@ -58,3 +58,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig
index fad33163b6b..78edb456b84 100644
--- a/configs/ls1046aqds_sdcard_ifc_defconfig
+++ b/configs/ls1046aqds_sdcard_ifc_defconfig
@@ -80,3 +80,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig
index 3571a6f9e96..d085daf384c 100644
--- a/configs/ls1046aqds_sdcard_qspi_defconfig
+++ b/configs/ls1046aqds_sdcard_qspi_defconfig
@@ -74,3 +74,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
index e1737479231..6a9391478b4 100644
--- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
@@ -61,3 +61,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_tfa_defconfig b/configs/ls1046aqds_tfa_defconfig
index 824fc518ca7..04e6b2392c2 100644
--- a/configs/ls1046aqds_tfa_defconfig
+++ b/configs/ls1046aqds_tfa_defconfig
@@ -71,3 +71,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig
index 768ce7a821b..bbb352db316 100644
--- a/configs/ls1046ardb_emmc_defconfig
+++ b/configs/ls1046ardb_emmc_defconfig
@@ -73,3 +73,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
index aff9bf81fcd..b9c8a8822cf 100644
--- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
@@ -55,3 +55,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig
index b482e73bef6..51edada3f86 100644
--- a/configs/ls1046ardb_qspi_defconfig
+++ b/configs/ls1046ardb_qspi_defconfig
@@ -57,3 +57,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig
index 1e2770a9c08..84e059671c2 100644
--- a/configs/ls1046ardb_qspi_spl_defconfig
+++ b/configs/ls1046ardb_qspi_spl_defconfig
@@ -77,3 +77,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_SPL_GZIP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
index 1f5fa8ff037..9954e894dac 100644
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@@ -70,3 +70,5 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig
index 197090474bc..35028097564 100644
--- a/configs/ls1046ardb_sdcard_defconfig
+++ b/configs/ls1046ardb_sdcard_defconfig
@@ -72,3 +72,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
index 1dde0ae73b3..9e3042b797e 100644
--- a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
@@ -54,3 +54,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_tfa_defconfig b/configs/ls1046ardb_tfa_defconfig
index 280ca83d424..2f7686bafd1 100644
--- a/configs/ls1046ardb_tfa_defconfig
+++ b/configs/ls1046ardb_tfa_defconfig
@@ -58,3 +58,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c
index bcddff2d7a0..b30f223a5c2 100644
--- a/drivers/power/power_i2c.c
+++ b/drivers/power/power_i2c.c
@@ -7,6 +7,7 @@
  * Stefano Babic, DENX Software Engineering, sbabic@denx.de
  *
  * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
+ * (C) Copyright 2019 NXP
  */
 
 #include <common.h>
@@ -21,8 +22,20 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
 
 	if (check_reg(p, reg))
 		return -EINVAL;
+#if defined(CONFIG_DM_I2C)
+	struct udevice *dev;
+	int ret;
 
+	ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       p->bus);
+		return -ENXIO;
+	}
+#else /* Non DM I2C support - will be removed */
 	I2C_SET_BUS(p->bus);
+#endif
 
 	switch (pmic_i2c_tx_num) {
 	case 3:
@@ -53,7 +66,11 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
 		return -EINVAL;
 	}
 
+#if defined(CONFIG_DM_I2C)
+	return dm_i2c_write(dev, reg, buf, pmic_i2c_tx_num);
+#else
 	return i2c_write(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num);
+#endif
 }
 
 int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
@@ -65,9 +82,21 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
 	if (check_reg(p, reg))
 		return -EINVAL;
 
-	I2C_SET_BUS(p->bus);
+#if defined(CONFIG_DM_I2C)
+	struct udevice *dev;
 
+	ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       p->bus);
+		return -ENXIO;
+	}
+	ret = dm_i2c_read(dev, reg, buf, pmic_i2c_tx_num);
+#else /* Non DM I2C support - will be removed */
+	I2C_SET_BUS(p->bus);
 	ret = i2c_read(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num);
+#endif
 	if (ret)
 		return ret;
 
@@ -100,12 +129,25 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
 
 int pmic_probe(struct pmic *p)
 {
-	i2c_set_bus_num(p->bus);
 	debug("Bus: %d PMIC:%s probed!\n", p->bus, p->name);
+#if defined(CONFIG_DM_I2C)
+	struct udevice *dev;
+	int ret;
+
+	ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       p->bus);
+		return -ENXIO;
+	}
+#else /* Non DM I2C support - will be removed */
+	i2c_set_bus_num(p->bus);
 	if (i2c_probe(pmic_i2c_addr)) {
 		printf("Can't find PMIC:%s\n", p->name);
 		return -ENODEV;
 	}
+#endif
 
 	return 0;
 }
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 978df3c9473..e80c2996ef9 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -16,6 +16,7 @@
 #define SPL_NO_QSPI
 #define SPL_NO_USB
 #define SPL_NO_SATA
+#undef CONFIG_DM_I2C
 #endif
 #if defined(CONFIG_SPL_BUILD) && \
 	(defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT))
@@ -126,7 +127,17 @@
 #endif
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_MXC_I2C4		/* enable I2C bus 4 */
+#else
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
+#endif
 
 /* PCIe */
 #define CONFIG_PCIE1		/* PCIE controller 1 */
-- 
cgit v1.3.1


From f1573d842cfae38dc8c73c8a6201b79ced62ec5d Mon Sep 17 00:00:00 2001
From: Alison Wang <alison.wang@nxp.com>
Date: Mon, 16 Mar 2020 15:59:06 +0800
Subject: configs: ls1021a: Append othbootargs to bootargs

This patch appends othbootargs to bootargs for LS1021ATWR board.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 include/configs/ls1021atwr.h | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'include')

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 6a6cdd19cca..a6289850ca1 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -297,7 +297,7 @@
 
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
-	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
+	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200 $othbootargs\0" \
 	"initrd_high=0xffffffff\0"      \
 	"fdt_addr=0x64f00000\0"		\
 	"kernel_addr=0x65000000\0"	\
@@ -312,7 +312,6 @@
 	"kernel_size=0x2800000\0"	\
 	"kernel_addr_sd=0x8000\0"	\
 	"kernel_size_sd=0x14000\0"	\
-	"$othbootargs\0"		\
 	"othbootargs=cma=64M@0x0-0xb0000000\0"	\
 	BOOTENV				\
 	"boot_scripts=ls1021atwr_boot.scr\0"	\
@@ -354,7 +353,7 @@
 		"$kernel_size && bootm $load_addr#$board\0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS	\
-	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
+	"bootargs=root=/dev/ram0 rw console=ttyS0,115200 $othbootargs\0" \
 	"initrd_high=0xffffffff\0"      \
 	"fdt_addr=0x64f00000\0"		\
 	"kernel_addr=0x61000000\0"	\
@@ -373,7 +372,6 @@
 	"kernel_size_sd=0x14000\0"	\
 	"kernelhdr_addr_sd=0x4000\0"		\
 	"kernelhdr_size_sd=0x10\0"		\
-	"$othbootargs\0"			\
 	"othbootargs=cma=64M@0x0-0xb0000000\0"	\
 	BOOTENV				\
 	"boot_scripts=ls1021atwr_boot.scr\0"	\
-- 
cgit v1.3.1


From 1d0bb1b9d2928ba99464ee0ad4091554e731f640 Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Fri, 20 Mar 2020 18:26:14 +0800
Subject: configs: ls1012afrwy: adjust env kernel_addr_r

Adjust environment kernel_addr_r from 0x96000000 to 0x92000000
to fix a bug that failed to boot kernel for ls1012afrwy with 512MiB RAM,
=> tftpboot $kernel_addr_r Image (Image size is 36 MiB)
TFTP error: trying to overwrite reserved memory...

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 include/configs/ls1012afrwy.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include')

diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h
index 44b467aca54..899dfdbdf1f 100644
--- a/include/configs/ls1012afrwy.h
+++ b/include/configs/ls1012afrwy.h
@@ -66,7 +66,7 @@
 	"fdtheader_addr_r=0x80100000\0"		\
 	"kernelheader_addr_r=0x80200000\0"	\
 	"kernelheader_size=0x40000\0"		\
-	"kernel_addr_r=0x96000000\0"		\
+	"kernel_addr_r=0x92000000\0"		\
 	"fdt_addr_r=0x90000000\0"		\
 	"load_addr=0x92000000\0"		\
 	"kernel_size=0x2800000\0"		\
-- 
cgit v1.3.1


From b9804c35a877b11d128262b968d0a9499584c339 Mon Sep 17 00:00:00 2001
From: Kuldeep Singh <kuldeep.singh@nxp.com>
Date: Thu, 12 Mar 2020 15:13:00 +0530
Subject: configs: lx2160a: Access flash memory as per spi-mem

MC_INIT and BOOT command currently access spi-nor flash memory directly.
As per spi-mem framework, flash memory access via absolute addresses is
no more possible. Use flash APIs to access memory instead of directly
using it.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
---
 include/configs/lx2160a_common.h | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

(limited to 'include')

diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index 7adb31d81d5..d47abf6e657 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -187,11 +187,15 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 /* Initial environment variables */
-#define XSPI_MC_INIT_CMD			\
-	"env exists secureboot && "		\
-	"esbc_validate 0x20640000 && "		\
-	"esbc_validate 0x20680000 ;"		\
-	"fsl_mc start mc 0x20a00000 0x20e00000\0"
+#define XSPI_MC_INIT_CMD				\
+	"sf probe 0:0 && "				\
+	"sf read 0x80640000 0x640000 0x80000 && "	\
+	"env exists secureboot && "			\
+	"esbc_validate 0x80640000 && "			\
+	"esbc_validate 0x80680000; "			\
+	"sf read 0x80a00000 0xa00000 0x300000 && "	\
+	"sf read 0x80e00000 0xe00000 0x100000; "	\
+	"fsl_mc start mc 0x80a00000 0x80e00000\0"
 
 #define SD_MC_INIT_CMD				\
 	"mmc read 0x80a00000 0x5000 0x1200;"	\
@@ -249,10 +253,13 @@ unsigned long get_board_ddr_clk(void);
 		"source ${scriptaddr}\0"
 
 #define XSPI_NOR_BOOTCOMMAND						\
-			"env exists mcinitcmd && env exists secureboot "\
-			"&& esbc_validate 0x206C0000; "			\
+			"sf probe 0:0; "				\
+			"sf read 0x806c0000 0x6c0000 0x40000; "		\
+			"env exists mcinitcmd && env exists secureboot"	\
+			" && esbc_validate 0x806c0000; "		\
+			"sf read 0x80d00000 0xd00000 0x100000; "	\
 			"env exists mcinitcmd && "			\
-			"fsl_mc lazyapply dpl 0x20d00000; "		\
+			"fsl_mc lazyapply dpl 0x80d00000; "		\
 			"run distro_bootcmd;run xspi_bootcmd; "		\
 			"env exists secureboot && esbc_halt;"
 
-- 
cgit v1.3.1