From b565b18a294fe67e3463a990da9a1165ec82cf16 Mon Sep 17 00:00:00 2001 From: Denis Zalevskiy Date: Tue, 12 Nov 2019 19:15:17 +0000 Subject: board: ge: bx50v3: Enable DM for PCI and ethernet DM for PCI pulls DM for ethernet that also needs other changes described below to build u-boot and keep existing functionality - ability to update MAC addresses of FEC ethernet adapter and I210 adapter connected to the Marvell switch. - fec_mxc driver with DM needs PHYLIB; - configuration items are moved from ge_bx50v3.h to ge_bx50v3_defconfig; - FEC is marked as eth0 because it is always present, so indices changed: I210 are still probed in the same order; - board_eth_init() was used by legacy ethernet, setup for enet iomux and pcie is moved to the board_late_init(); - pci_init() is called from the board_late_init() to initiate PCI bus probing, so I210 devices are propagated to the device tree; Signed-off-by: Denis Zalevskiy [Describe PHY reset in device tree] Signed-off-by: Ian Ray Signed-off-by: Robert Beckett --- include/configs/ge_bx50v3.h | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'include') diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 9f8d388f522..1c7ba36c8ae 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -49,16 +49,6 @@ #define CONFIG_USB_GADGET_MASS_STORAGE #endif -/* Networking Configs */ -#ifdef CONFIG_NET -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 4 -#define CONFIG_PHY_ATHEROS -#endif - /* Serial Flash */ /* allow to overwrite serial and ethaddr */ @@ -194,8 +184,6 @@ #define CONFIG_IMX6_PWM_PER_CLK 66000000 -#define CONFIG_PCI -#define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW #define CONFIG_PCIE_IMX #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) -- cgit v1.3.1