From 86879d7120ab4000d924b12315c01d57506af832 Mon Sep 17 00:00:00 2001 From: Łukasz Majewski Date: Tue, 13 Nov 2012 03:21:53 +0000 Subject: pmic:i2c: Add I2C sensor byte order (big/little) to PMIC framework Since the pmic_reg_read is the u32 value, the order in which bytes are placed to form u32 value is important. Support for big and little sensor endianess is added. Moreover calls to [leXX|beXX]_to_cpu have been added to support little and big endian SoCs. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park --- include/pmic.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/pmic.h b/include/pmic.h index 6a05b40aefe..1a2db051109 100644 --- a/include/pmic.h +++ b/include/pmic.h @@ -27,6 +27,7 @@ enum { PMIC_I2C, PMIC_SPI, }; enum { I2C_PMIC, I2C_NUM, }; enum { PMIC_READ, PMIC_WRITE, }; +enum { PMIC_SENSOR_BYTE_ORDER_LITTLE, PMIC_SENSOR_BYTE_ORDER_BIG, }; struct p_i2c { unsigned char addr; @@ -47,6 +48,7 @@ struct pmic { const char *name; unsigned char bus; unsigned char interface; + unsigned char sensor_byte_order; unsigned char number_of_regs; union hw { struct p_i2c i2c; -- cgit v1.3.1 From c7336815078ff3745e3130aeff35991e3e98e61e Mon Sep 17 00:00:00 2001 From: Łukasz Majewski Date: Tue, 13 Nov 2012 03:21:55 +0000 Subject: pmic: Extend PMIC framework to support multiple instances of PMIC devices The PMIC framework has been extended to support multiple instances of the variety of devices responsible for power management. This change allows supporting of e.g. fuel gauge, charger, MUIC (Micro USB Interface Circuit). Power related includes have been moved to ./include/power directory. This is a first of a series of patches - in the future "pmic" will be replaced with "power". Two important issues: 1. The PMIC needs to be initialized just after malloc is configured 2. It uses list to hold information about available PMIC devices Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Cc: Stefano Babic --- board/davedenx/qong/qong.c | 12 +- board/freescale/mx31pdk/mx31pdk.c | 12 +- board/freescale/mx35pdk/mx35pdk.c | 14 ++- board/freescale/mx51evk/mx51evk.c | 12 +- board/freescale/mx53evk/mx53evk.c | 12 +- board/freescale/mx53loco/mx53loco.c | 21 +++- board/genesi/mx51_efikamx/efikamx.c | 12 +- board/hale/tt01/tt01.c | 14 ++- board/samsung/goni/goni.c | 11 +- board/samsung/trats/trats.c | 18 ++- board/samsung/universal_c210/universal.c | 14 ++- board/ttcontrol/vision2/vision2.c | 12 +- drivers/misc/pmic_core.c | 116 +++++++++++++----- drivers/misc/pmic_dialog.c | 14 ++- drivers/misc/pmic_fsl.c | 14 ++- drivers/misc/pmic_i2c.c | 6 +- drivers/misc/pmic_max8997.c | 16 ++- drivers/misc/pmic_max8998.c | 16 ++- drivers/misc/pmic_spi.c | 4 +- drivers/rtc/mc13xxx-rtc.c | 10 +- include/max8997_pmic.h | 190 ----------------------------- include/max8998_pmic.h | 86 ------------- include/pmic.h | 74 ----------- include/power/max8997_pmic.h | 203 +++++++++++++++++++++++++++++++ include/power/max8998_pmic.h | 86 +++++++++++++ include/power/pmic.h | 81 ++++++++++++ 26 files changed, 631 insertions(+), 449 deletions(-) delete mode 100644 include/max8997_pmic.h delete mode 100644 include/max8998_pmic.h delete mode 100644 include/pmic.h create mode 100644 include/power/max8997_pmic.h create mode 100644 include/power/max8998_pmic.h create mode 100644 include/power/pmic.h (limited to 'include') diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c index c41f11d60c7..a3079dbca36 100644 --- a/board/davedenx/qong/qong.c +++ b/board/davedenx/qong/qong.c @@ -28,11 +28,12 @@ #include #include #include -#include +#include #include #include #include "qong_fpga.h" #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -172,10 +173,15 @@ int board_late_init(void) { u32 val; struct pmic *p; + int ret; - pmic_init(); - p = get_pmic(); + ret = pmic_init(I2C_PMIC); + if (ret) + return ret; + p = pmic_get("FSL_PMIC"); + if (!p) + return -ENODEV; /* Enable RTC battery */ pmic_reg_read(p, REG_POWER_CTL0, &val); pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN); diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c index 9f8bc53e711..bc60632aa0b 100644 --- a/board/freescale/mx31pdk/mx31pdk.c +++ b/board/freescale/mx31pdk/mx31pdk.c @@ -30,8 +30,9 @@ #include #include #include -#include +#include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -83,10 +84,15 @@ int board_late_init(void) { u32 val; struct pmic *p; + int ret; - pmic_init(); - p = get_pmic(); + ret = pmic_init(I2C_PMIC); + if (ret) + return ret; + p = pmic_get("FSL_PMIC"); + if (!p) + return -ENODEV; /* Enable RTC battery */ pmic_reg_read(p, REG_POWER_CTL0, &val); pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN); diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c index a12531fb892..c835b0edeb5 100644 --- a/board/freescale/mx35pdk/mx35pdk.c +++ b/board/freescale/mx35pdk/mx35pdk.c @@ -31,7 +31,7 @@ #include #include #include -#include +#include #include #include #include @@ -207,7 +207,9 @@ int board_init(void) static inline int pmic_detect(void) { unsigned int id; - struct pmic *p = get_pmic(); + struct pmic *p = pmic_get("FSL_PMIC"); + if (!p) + return -ENODEV; pmic_reg_read(p, REG_IDENTIFICATION, &id); @@ -231,10 +233,14 @@ int board_late_init(void) u8 val; u32 pmic_val; struct pmic *p; + int ret; + + ret = pmic_init(I2C_PMIC); + if (ret) + return ret; - pmic_init(); if (pmic_detect()) { - p = get_pmic(); + p = pmic_get("FSL_PMIC"); mxc_request_iomux(MX35_PIN_WATCHDOG_RST, MUX_CONFIG_SION | MUX_CONFIG_ALT1); diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index 421d8c22444..5504636ddf4 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include #include @@ -252,9 +252,15 @@ static void power_init(void) unsigned int val; struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE; struct pmic *p; + int ret; + + ret = pmic_init(I2C_PMIC); + if (ret) + return; - pmic_init(); - p = get_pmic(); + p = pmic_get("FSL_PMIC"); + if (!p) + return; /* Write needed to Power Gate 2 register */ pmic_reg_read(p, REG_POWER_MISC, &val); diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c index bb4621d62ec..12735014767 100644 --- a/board/freescale/mx53evk/mx53evk.c +++ b/board/freescale/mx53evk/mx53evk.c @@ -34,7 +34,7 @@ #include #include #include -#include +#include #include #include #include @@ -123,9 +123,15 @@ void power_init(void) { unsigned int val; struct pmic *p; + int ret; + + ret = pmic_init(I2C_PMIC); + if (ret) + return; - pmic_init(); - p = get_pmic(); + p = pmic_get("FSL_PMIC"); + if (!p) + return; /* Set VDDA to 1.25V */ pmic_reg_read(p, REG_SW_2, &val); diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index a11e8831866..f4a9b084208 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -36,7 +36,7 @@ #include #include #include -#include +#include #include #include #include @@ -344,10 +344,16 @@ static int power_init(void) unsigned int val; int ret = -1; struct pmic *p; + int retval; if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) { - pmic_dialog_init(); - p = get_pmic(); + retval = pmic_dialog_init(I2C_PMIC); + if (retval) + return retval; + + p = pmic_get("DIALOG_PMIC"); + if (!p) + return -ENODEV; /* Set VDDA to 1.25V */ val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V; @@ -363,8 +369,13 @@ static int power_init(void) } if (!i2c_probe(CONFIG_SYS_FSL_PMIC_I2C_ADDR)) { - pmic_init(); - p = get_pmic(); + retval = pmic_init(I2C_PMIC); + if (retval) + return retval; + + p = pmic_get("DIALOG_PMIC"); + if (!p) + return -ENODEV; /* Set VDDGP to 1.25V for 1GHz on SW1 */ pmic_reg_read(p, REG_SW_0, &val); diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c index c2b2823ef9d..69d41db530d 100644 --- a/board/genesi/mx51_efikamx/efikamx.c +++ b/board/genesi/mx51_efikamx/efikamx.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include @@ -173,9 +173,15 @@ static void power_init(void) unsigned int val; struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE; struct pmic *p; + int ret; + + ret = pmic_init(I2C_PMIC); + if (ret) + return; - pmic_init(); - p = get_pmic(); + p = pmic_get("FSL_PMIC"); + if (!p) + return; /* Write needed to Power Gate 2 register */ pmic_reg_read(p, REG_POWER_MISC, &val); diff --git a/board/hale/tt01/tt01.c b/board/hale/tt01/tt01.c index 143fcefedf5..0c2cb795dd6 100644 --- a/board/hale/tt01/tt01.c +++ b/board/hale/tt01/tt01.c @@ -25,12 +25,13 @@ #include #include #include -#include +#include #include #include #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -195,14 +196,21 @@ int board_mmc_init(bd_t *bis) { u32 val; struct pmic *p; + int ret; /* * this is the first driver to use the pmic, so call * pmic_init() here. board_late_init() is too late for * the MMC driver. */ - pmic_init(); - p = get_pmic(); + + ret = pmic_init(I2C_PMIC); + if (ret) + return ret; + + p = pmic_get("FSL_PMIC"); + if (!p) + return -ENODEV; /* configure pins for SDHC1 only */ mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_CLK, MUX_CTL_FUNC)); diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c index e8fb1ea4130..71ed618c6fd 100644 --- a/board/samsung/goni/goni.c +++ b/board/samsung/goni/goni.c @@ -25,10 +25,10 @@ #include #include #include -#include +#include #include #include -#include +#include DECLARE_GLOBAL_DATA_PTR; static struct s5pc110_gpio *s5pc110_gpio; @@ -42,8 +42,9 @@ int board_init(void) gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; #if defined(CONFIG_PMIC) - pmic_init(); + pmic_init(I2C_5); #endif + return 0; } @@ -108,7 +109,9 @@ static int s5pc1xx_phy_control(int on) { int ret; static int status; - struct pmic *p = get_pmic(); + struct pmic *p = pmic_get("MAX8998_PMIC"); + if (!p) + return -ENODEV; if (pmic_probe(p)) return -1; diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index e11a8922fca..e0a98901f73 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -34,9 +34,9 @@ #include #include #include -#include +#include #include -#include +#include #include #include "setup.h" @@ -69,7 +69,7 @@ int board_init(void) printf("HW Revision:\t0x%x\n", board_rev); #if defined(CONFIG_PMIC) - pmic_init(); + pmic_init(I2C_5); #endif return 0; @@ -238,7 +238,9 @@ static int s5pc210_phy_control(int on) { int ret = 0; u32 val = 0; - struct pmic *p = get_pmic(); + struct pmic *p = pmic_get("MAX8997_PMIC"); + if (!p) + return -ENODEV; if (pmic_probe(p)) return -1; @@ -413,7 +415,9 @@ static void lcd_reset(void) static int lcd_power(void) { int ret = 0; - struct pmic *p = get_pmic(); + struct pmic *p = pmic_get("MAX8997_PMIC"); + if (!p) + return -ENODEV; if (pmic_probe(p)) return 0; @@ -473,7 +477,9 @@ static struct mipi_dsim_lcd_device mipi_lcd_device = { static int mipi_power(void) { int ret = 0; - struct pmic *p = get_pmic(); + struct pmic *p = pmic_get("MAX8997_PMIC"); + if (!p) + return -ENODEV; if (pmic_probe(p)) return 0; diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index 90fff5cf5e1..c4950ddc269 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -27,10 +27,10 @@ #include #include #include -#include +#include #include #include -#include +#include DECLARE_GLOBAL_DATA_PTR; @@ -59,7 +59,7 @@ int board_init(void) gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; #if defined(CONFIG_PMIC) - pmic_init(); + pmic_init(I2C_5); #endif check_hw_revision(); @@ -112,7 +112,9 @@ static unsigned short get_adc_value(int channel) static int adc_power_control(int on) { int ret; - struct pmic *p = get_pmic(); + struct pmic *p = pmic_get("MAX8998_PMIC"); + if (!p) + return -ENODEV; if (pmic_probe(p)) return -1; @@ -280,7 +282,9 @@ int board_mmc_init(bd_t *bis) static int s5pc210_phy_control(int on) { int ret = 0; - struct pmic *p = get_pmic(); + struct pmic *p = pmic_get("MAX8998_PMIC"); + if (!p) + return -ENODEV; if (pmic_probe(p)) return -1; diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index abdd1aac2b5..a471fec23dd 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -34,7 +34,7 @@ #include #include #include -#include +#include #include #include #include @@ -306,9 +306,15 @@ static void power_init_mx51(void) { unsigned int val; struct pmic *p; + int ret; + + ret = pmic_init(I2C_PMIC); + if (ret) + return; - pmic_init(); - p = get_pmic(); + p = pmic_get("FSL_PMIC"); + if (!p) + return; /* Write needed to Power Gate 2 register */ pmic_reg_read(p, REG_POWER_MISC, &val); diff --git a/drivers/misc/pmic_core.c b/drivers/misc/pmic_core.c index 5d62a56d346..4066b15adcd 100644 --- a/drivers/misc/pmic_core.c +++ b/drivers/misc/pmic_core.c @@ -27,18 +27,21 @@ */ #include +#include #include -#include +#include +#include -static struct pmic pmic; +static LIST_HEAD(pmic_list); -int check_reg(u32 reg) +int check_reg(struct pmic *p, u32 reg) { - if (reg >= pmic.number_of_regs) { + if (reg >= p->number_of_regs) { printf(" = %d is invalid. Should be less than %d\n", - reg, pmic.number_of_regs); + reg, p->number_of_regs); return -1; } + return 0; } @@ -65,11 +68,16 @@ static void pmic_show_info(struct pmic *p) printf("PMIC: %s\n", p->name); } -static void pmic_dump(struct pmic *p) +static int pmic_dump(struct pmic *p) { int i, ret; u32 val; + if (!p) { + puts("Wrong PMIC name!\n"); + return -1; + } + pmic_show_info(p); for (i = 0; i < p->number_of_regs; i++) { ret = pmic_reg_read(p, i, &val); @@ -82,35 +90,84 @@ static void pmic_dump(struct pmic *p) printf("%08x ", val); } puts("\n"); + return 0; } -struct pmic *get_pmic(void) +struct pmic *pmic_alloc(void) { - return &pmic; + struct pmic *p; + + p = calloc(sizeof(*p), 1); + if (!p) { + printf("%s: No available memory for allocation!\n", __func__); + return NULL; + } + + list_add_tail(&p->list, &pmic_list); + + debug("%s: new pmic struct: 0x%p\n", __func__, p); + + return p; +} + +struct pmic *pmic_get(const char *s) +{ + struct pmic *p; + + list_for_each_entry(p, &pmic_list, list) { + if (strcmp(p->name, s) == 0) { + debug("%s: pmic %s -> 0x%p\n", __func__, p->name, p); + return p; + } + } + + return NULL; +} + +static void pmic_list_names(void) +{ + struct pmic *p; + + puts("PMIC devices:\n"); + list_for_each_entry(p, &pmic_list, list) { + printf("name: %s\n", p->name); + } } int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { u32 ret, reg, val; + struct pmic *p; char *cmd; - struct pmic *p = &pmic; - /* at least two arguments please */ if (argc < 2) - return cmd_usage(cmdtp); + return CMD_RET_USAGE; cmd = argv[1]; + + if (strcmp(cmd, "list") == 0) { + pmic_list_names(); + return CMD_RET_SUCCESS; + } + if (strcmp(cmd, "dump") == 0) { - pmic_dump(p); - return 0; + p = pmic_get(argv[2]); + if (!p) + return CMD_RET_FAILURE; + if (pmic_dump(p)) + return CMD_RET_FAILURE; + return CMD_RET_SUCCESS; } if (strcmp(cmd, "read") == 0) { - if (argc < 3) - return cmd_usage(cmdtp); + if (argc < 4) + return CMD_RET_USAGE; - reg = simple_strtoul(argv[2], NULL, 16); + reg = simple_strtoul(argv[3], NULL, 16); + p = pmic_get(argv[2]); + if (!p) + return CMD_RET_FAILURE; ret = pmic_reg_read(p, reg, &val); @@ -119,29 +176,32 @@ int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("\n0x%02x: 0x%08x\n", reg, val); - return 0; + return CMD_RET_SUCCESS; } if (strcmp(cmd, "write") == 0) { - if (argc < 4) - return cmd_usage(cmdtp); - - reg = simple_strtoul(argv[2], NULL, 16); - val = simple_strtoul(argv[3], NULL, 16); - + if (argc < 5) + return CMD_RET_USAGE; + + reg = simple_strtoul(argv[3], NULL, 16); + val = simple_strtoul(argv[4], NULL, 16); + p = pmic_get(argv[2]); + if (!p) + return CMD_RET_FAILURE; pmic_reg_write(p, reg, val); - return 0; + return CMD_RET_SUCCESS; } /* No subcommand found */ - return 1; + return CMD_RET_SUCCESS; } U_BOOT_CMD( pmic, CONFIG_SYS_MAXARGS, 1, do_pmic, "PMIC", - "dump - dump PMIC registers\n" - "pmic read - read register\n" - "pmic write - write register" + "list - list available PMICs\n" + "pmic dump name - dump named PMIC registers\n" + "pmic name read - read register\n" + "pmic name write - write register" ); diff --git a/drivers/misc/pmic_dialog.c b/drivers/misc/pmic_dialog.c index e97af1d1d01..d7ebd1583e8 100644 --- a/drivers/misc/pmic_dialog.c +++ b/drivers/misc/pmic_dialog.c @@ -17,13 +17,19 @@ */ #include -#include +#include #include +#include -int pmic_dialog_init(void) +int pmic_dialog_init(unsigned char bus) { - struct pmic *p = get_pmic(); static const char name[] = "DIALOG_PMIC"; + struct pmic *p = pmic_alloc(); + + if (!p) { + printf("%s: POWER allocation error!\n", __func__); + return -ENOMEM; + } p->name = name; p->number_of_regs = DIALOG_NUM_OF_REGS; @@ -31,7 +37,7 @@ int pmic_dialog_init(void) p->interface = PMIC_I2C; p->hw.i2c.addr = CONFIG_SYS_DIALOG_PMIC_I2C_ADDR; p->hw.i2c.tx_num = 1; - p->bus = I2C_PMIC; + p->bus = bus; return 0; } diff --git a/drivers/misc/pmic_fsl.c b/drivers/misc/pmic_fsl.c index 0ff75ed76e5..0275fd9891a 100644 --- a/drivers/misc/pmic_fsl.c +++ b/drivers/misc/pmic_fsl.c @@ -23,8 +23,9 @@ #include #include -#include +#include #include +#include #if defined(CONFIG_PMIC_SPI) static u32 pmic_spi_prepare_tx(u32 reg, u32 *val, u32 write) @@ -33,10 +34,15 @@ static u32 pmic_spi_prepare_tx(u32 reg, u32 *val, u32 write) } #endif -int pmic_init(void) +int pmic_init(unsigned char bus) { - struct pmic *p = get_pmic(); static const char name[] = "FSL_PMIC"; + struct pmic *p = pmic_alloc(); + + if (!p) { + printf("%s: POWER allocation error!\n", __func__); + return -ENOMEM; + } p->name = name; p->number_of_regs = PMIC_NUM_OF_REGS; @@ -54,7 +60,7 @@ int pmic_init(void) p->interface = PMIC_I2C; p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR; p->hw.i2c.tx_num = 3; - p->bus = I2C_PMIC; + p->bus = bus; #else #error "You must select CONFIG_PMIC_SPI or CONFIG_PMIC_I2C" #endif diff --git a/drivers/misc/pmic_i2c.c b/drivers/misc/pmic_i2c.c index 1064bfe993d..3e5a784cf53 100644 --- a/drivers/misc/pmic_i2c.c +++ b/drivers/misc/pmic_i2c.c @@ -28,7 +28,7 @@ #include #include -#include +#include #include #include @@ -36,7 +36,7 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32 val) { unsigned char buf[4] = { 0 }; - if (check_reg(reg)) + if (check_reg(p, reg)) return -1; switch (pmic_i2c_tx_num) { @@ -79,7 +79,7 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val) unsigned char buf[4] = { 0 }; u32 ret_val = 0; - if (check_reg(reg)) + if (check_reg(p, reg)) return -1; if (i2c_read(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num)) diff --git a/drivers/misc/pmic_max8997.c b/drivers/misc/pmic_max8997.c index 4943f667b51..7fe1b53ff07 100644 --- a/drivers/misc/pmic_max8997.c +++ b/drivers/misc/pmic_max8997.c @@ -22,14 +22,20 @@ */ #include -#include -#include +#include +#include #include +#include -int pmic_init(void) +int pmic_init(unsigned char bus) { - struct pmic *p = get_pmic(); static const char name[] = "MAX8997_PMIC"; + struct pmic *p = pmic_alloc(); + + if (!p) { + printf("%s: POWER allocation error!\n", __func__); + return -ENOMEM; + } puts("Board PMIC init\n"); @@ -38,7 +44,7 @@ int pmic_init(void) p->number_of_regs = PMIC_NUM_OF_REGS; p->hw.i2c.addr = MAX8997_I2C_ADDR; p->hw.i2c.tx_num = 1; - p->bus = I2C_0; + p->bus = bus; return 0; } diff --git a/drivers/misc/pmic_max8998.c b/drivers/misc/pmic_max8998.c index cc69fd70803..452e1c8d862 100644 --- a/drivers/misc/pmic_max8998.c +++ b/drivers/misc/pmic_max8998.c @@ -22,13 +22,19 @@ */ #include -#include -#include +#include +#include +#include -int pmic_init(void) +int pmic_init(unsigned char bus) { - struct pmic *p = get_pmic(); static const char name[] = "MAX8998_PMIC"; + struct pmic *p = pmic_alloc(); + + if (!p) { + printf("%s: POWER allocation error!\n", __func__); + return -ENOMEM; + } puts("Board PMIC init\n"); @@ -37,7 +43,7 @@ int pmic_init(void) p->number_of_regs = PMIC_NUM_OF_REGS; p->hw.i2c.addr = MAX8998_I2C_ADDR; p->hw.i2c.tx_num = 1; - p->bus = I2C_PMIC; + p->bus = bus; return 0; } diff --git a/drivers/misc/pmic_spi.c b/drivers/misc/pmic_spi.c index 5a0dd22e290..27488ea5d92 100644 --- a/drivers/misc/pmic_spi.c +++ b/drivers/misc/pmic_spi.c @@ -28,7 +28,7 @@ #include #include -#include +#include #include static struct spi_slave *slave; @@ -59,7 +59,7 @@ static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write) return -1; } - if (check_reg(reg)) + if (check_reg(p, reg)) return -1; if (spi_claim_bus(slave)) diff --git a/drivers/rtc/mc13xxx-rtc.c b/drivers/rtc/mc13xxx-rtc.c index 70ea8a15898..e79f4621d3f 100644 --- a/drivers/rtc/mc13xxx-rtc.c +++ b/drivers/rtc/mc13xxx-rtc.c @@ -23,16 +23,18 @@ #include #include #include -#include +#include #include int rtc_get(struct rtc_time *rtc) { u32 day1, day2, time; int tim, i = 0; - struct pmic *p = get_pmic(); + struct pmic *p = pmic_get("FSL_PMIC"); int ret; + if (!p) + return -1; do { ret = pmic_reg_read(p, REG_RTC_DAY, &day1); if (ret < 0) @@ -61,7 +63,9 @@ int rtc_get(struct rtc_time *rtc) int rtc_set(struct rtc_time *rtc) { u32 time, day; - struct pmic *p = get_pmic(); + struct pmic *p = pmic_get("FSL_PMIC"); + if (!p) + return -1; time = mktime(rtc->tm_year, rtc->tm_mon, rtc->tm_mday, rtc->tm_hour, rtc->tm_min, rtc->tm_sec); diff --git a/include/max8997_pmic.h b/include/max8997_pmic.h deleted file mode 100644 index 17ae24ea6a0..00000000000 --- a/include/max8997_pmic.h +++ /dev/null @@ -1,190 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics - * Lukasz Majewski - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __MAX8997_PMIC_H_ -#define __MAX8997_PMIC_H_ - -/* MAX 8997 registers */ -enum { - MAX8997_REG_PMIC_ID0 = 0x00, - MAX8997_REG_PMIC_ID1 = 0x01, - MAX8997_REG_INTSRC = 0x02, - MAX8997_REG_INT1 = 0x03, - MAX8997_REG_INT2 = 0x04, - MAX8997_REG_INT3 = 0x05, - MAX8997_REG_INT4 = 0x06, - - MAX8997_REG_INT1MSK = 0x08, - MAX8997_REG_INT2MSK = 0x09, - MAX8997_REG_INT3MSK = 0x0a, - MAX8997_REG_INT4MSK = 0x0b, - - MAX8997_REG_STATUS1 = 0x0d, - MAX8997_REG_STATUS2 = 0x0e, - MAX8997_REG_STATUS3 = 0x0f, - MAX8997_REG_STATUS4 = 0x10, - - MAX8997_REG_MAINCON1 = 0x13, - MAX8997_REG_MAINCON2 = 0x14, - MAX8997_REG_BUCKRAMP = 0x15, - - MAX8997_REG_BUCK1CTRL = 0x18, - MAX8997_REG_BUCK1DVS1 = 0x19, - MAX8997_REG_BUCK1DVS2 = 0x1a, - MAX8997_REG_BUCK1DVS3 = 0x1b, - MAX8997_REG_BUCK1DVS4 = 0x1c, - MAX8997_REG_BUCK1DVS5 = 0x1d, - MAX8997_REG_BUCK1DVS6 = 0x1e, - MAX8997_REG_BUCK1DVS7 = 0x1f, - MAX8997_REG_BUCK1DVS8 = 0x20, - MAX8997_REG_BUCK2CTRL = 0x21, - MAX8997_REG_BUCK2DVS1 = 0x22, - MAX8997_REG_BUCK2DVS2 = 0x23, - MAX8997_REG_BUCK2DVS3 = 0x24, - MAX8997_REG_BUCK2DVS4 = 0x25, - MAX8997_REG_BUCK2DVS5 = 0x26, - MAX8997_REG_BUCK2DVS6 = 0x27, - MAX8997_REG_BUCK2DVS7 = 0x28, - MAX8997_REG_BUCK2DVS8 = 0x29, - MAX8997_REG_BUCK3CTRL = 0x2a, - MAX8997_REG_BUCK3DVS = 0x2b, - MAX8997_REG_BUCK4CTRL = 0x2c, - MAX8997_REG_BUCK4DVS = 0x2d, - MAX8997_REG_BUCK5CTRL = 0x2e, - MAX8997_REG_BUCK5DVS1 = 0x2f, - MAX8997_REG_BUCK5DVS2 = 0x30, - MAX8997_REG_BUCK5DVS3 = 0x31, - MAX8997_REG_BUCK5DVS4 = 0x32, - MAX8997_REG_BUCK5DVS5 = 0x33, - MAX8997_REG_BUCK5DVS6 = 0x34, - MAX8997_REG_BUCK5DVS7 = 0x35, - MAX8997_REG_BUCK5DVS8 = 0x36, - MAX8997_REG_BUCK6CTRL = 0x37, - MAX8997_REG_BUCK6BPSKIPCTRL = 0x38, - MAX8997_REG_BUCK7CTRL = 0x39, - MAX8997_REG_BUCK7DVS = 0x3a, - MAX8997_REG_LDO1CTRL = 0x3b, - MAX8997_REG_LDO2CTRL = 0x3c, - MAX8997_REG_LDO3CTRL = 0x3d, - MAX8997_REG_LDO4CTRL = 0x3e, - MAX8997_REG_LDO5CTRL = 0x3f, - MAX8997_REG_LDO6CTRL = 0x40, - MAX8997_REG_LDO7CTRL = 0x41, - MAX8997_REG_LDO8CTRL = 0x42, - MAX8997_REG_LDO9CTRL = 0x43, - MAX8997_REG_LDO10CTRL = 0x44, - MAX8997_REG_LDO11CTRL = 0x45, - MAX8997_REG_LDO12CTRL = 0x46, - MAX8997_REG_LDO13CTRL = 0x47, - MAX8997_REG_LDO14CTRL = 0x48, - MAX8997_REG_LDO15CTRL = 0x49, - MAX8997_REG_LDO16CTRL = 0x4a, - MAX8997_REG_LDO17CTRL = 0x4b, - MAX8997_REG_LDO18CTRL = 0x4c, - MAX8997_REG_LDO21CTRL = 0x4d, - - MAX8997_REG_MBCCTRL1 = 0x50, - MAX8997_REG_MBCCTRL2 = 0x51, - MAX8997_REG_MBCCTRL3 = 0x52, - MAX8997_REG_MBCCTRL4 = 0x53, - MAX8997_REG_MBCCTRL5 = 0x54, - MAX8997_REG_MBCCTRL6 = 0x55, - MAX8997_REG_OTPCGHCVS = 0x56, - - MAX8997_REG_SAFEOUTCTRL = 0x5a, - - MAX8997_REG_LBCNFG1 = 0x5e, - MAX8997_REG_LBCNFG2 = 0x5f, - MAX8997_REG_BBCCTRL = 0x60, - - MAX8997_REG_FLASH1_CUR = 0x63, /* 0x63 ~ 0x6e for FLASH */ - MAX8997_REG_FLASH2_CUR = 0x64, - MAX8997_REG_MOVIE_CUR = 0x65, - MAX8997_REG_GSMB_CUR = 0x66, - MAX8997_REG_BOOST_CNTL = 0x67, - MAX8997_REG_LEN_CNTL = 0x68, - MAX8997_REG_FLASH_CNTL = 0x69, - MAX8997_REG_WDT_CNTL = 0x6a, - MAX8997_REG_MAXFLASH1 = 0x6b, - MAX8997_REG_MAXFLASH2 = 0x6c, - MAX8997_REG_FLASHSTATUS = 0x6d, - MAX8997_REG_FLASHSTATUSMASK = 0x6e, - - MAX8997_REG_GPIOCNTL1 = 0x70, - MAX8997_REG_GPIOCNTL2 = 0x71, - MAX8997_REG_GPIOCNTL3 = 0x72, - MAX8997_REG_GPIOCNTL4 = 0x73, - MAX8997_REG_GPIOCNTL5 = 0x74, - MAX8997_REG_GPIOCNTL6 = 0x75, - MAX8997_REG_GPIOCNTL7 = 0x76, - MAX8997_REG_GPIOCNTL8 = 0x77, - MAX8997_REG_GPIOCNTL9 = 0x78, - MAX8997_REG_GPIOCNTL10 = 0x79, - MAX8997_REG_GPIOCNTL11 = 0x7a, - MAX8997_REG_GPIOCNTL12 = 0x7b, - - MAX8997_REG_LDO1CONFIG = 0x80, - MAX8997_REG_LDO2CONFIG = 0x81, - MAX8997_REG_LDO3CONFIG = 0x82, - MAX8997_REG_LDO4CONFIG = 0x83, - MAX8997_REG_LDO5CONFIG = 0x84, - MAX8997_REG_LDO6CONFIG = 0x85, - MAX8997_REG_LDO7CONFIG = 0x86, - MAX8997_REG_LDO8CONFIG = 0x87, - MAX8997_REG_LDO9CONFIG = 0x88, - MAX8997_REG_LDO10CONFIG = 0x89, - MAX8997_REG_LDO11CONFIG = 0x8a, - MAX8997_REG_LDO12CONFIG = 0x8b, - MAX8997_REG_LDO13CONFIG = 0x8c, - MAX8997_REG_LDO14CONFIG = 0x8d, - MAX8997_REG_LDO15CONFIG = 0x8e, - MAX8997_REG_LDO16CONFIG = 0x8f, - MAX8997_REG_LDO17CONFIG = 0x90, - MAX8997_REG_LDO18CONFIG = 0x91, - MAX8997_REG_LDO21CONFIG = 0x92, - - MAX8997_REG_DVSOKTIMER1 = 0x97, - MAX8997_REG_DVSOKTIMER2 = 0x98, - MAX8997_REG_DVSOKTIMER4 = 0x99, - MAX8997_REG_DVSOKTIMER5 = 0x9a, - - PMIC_NUM_OF_REGS = 0x9b, -}; - -#define ENSAFEOUT1 (1 << 6) -#define ENSAFEOUT2 (1 << 7) - -#define MAX8997_I2C_ADDR (0xCC >> 1) -#define MAX8997_RTC_ADDR (0x0C >> 1) -#define MAX8997_MUIC_ADDR (0x4A >> 1) -#define MAX8997_FG_ADDR (0x6C >> 1) - -enum { - LDO_OFF = 0, - LDO_ON = 1, - - DIS_LDO = (0x00 << 6), - EN_LDO = (0x3 << 6), -}; - -#endif /* __MAX8997_PMIC_H_ */ diff --git a/include/max8998_pmic.h b/include/max8998_pmic.h deleted file mode 100644 index ca21f882c29..00000000000 --- a/include/max8998_pmic.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics - * Lukasz Majewski - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __MAX8998_PMIC_H_ -#define __MAX8998_PMIC_H_ - -/* MAX 8998 registers */ -enum { - MAX8998_REG_IRQ1, - MAX8998_REG_IRQ2, - MAX8998_REG_IRQ3, - MAX8998_REG_IRQ4, - MAX8998_REG_IRQM1, - MAX8998_REG_IRQM2, - MAX8998_REG_IRQM3, - MAX8998_REG_IRQM4, - MAX8998_REG_STATUS1, - MAX8998_REG_STATUS2, - MAX8998_REG_STATUSM1, - MAX8998_REG_STATUSM2, - MAX8998_REG_CHGR1, - MAX8998_REG_CHGR2, - MAX8998_REG_LDO_ACTIVE_DISCHARGE1, - MAX8998_REG_LDO_ACTIVE_DISCHARGE2, - MAX8998_REG_BUCK_ACTIVE_DISCHARGE3, - MAX8998_REG_ONOFF1, - MAX8998_REG_ONOFF2, - MAX8998_REG_ONOFF3, - MAX8998_REG_ONOFF4, - MAX8998_REG_BUCK1_VOLTAGE1, - MAX8998_REG_BUCK1_VOLTAGE2, - MAX8998_REG_BUCK1_VOLTAGE3, - MAX8998_REG_BUCK1_VOLTAGE4, - MAX8998_REG_BUCK2_VOLTAGE1, - MAX8998_REG_BUCK2_VOLTAGE2, - MAX8998_REG_BUCK3, - MAX8998_REG_BUCK4, - MAX8998_REG_LDO2_LDO3, - MAX8998_REG_LDO4, - MAX8998_REG_LDO5, - MAX8998_REG_LDO6, - MAX8998_REG_LDO7, - MAX8998_REG_LDO8_LDO9, - MAX8998_REG_LDO10_LDO11, - MAX8998_REG_LDO12, - MAX8998_REG_LDO13, - MAX8998_REG_LDO14, - MAX8998_REG_LDO15, - MAX8998_REG_LDO16, - MAX8998_REG_LDO17, - MAX8998_REG_BKCHR, - MAX8998_REG_LBCNFG1, - MAX8998_REG_LBCNFG2, - PMIC_NUM_OF_REGS, -}; - -#define MAX8998_LDO3 (1 << 2) -#define MAX8998_LDO4 (1 << 1) -#define MAX8998_LDO8 (1 << 5) -#define MAX8998_SAFEOUT1 (1 << 4) - -#define MAX8998_I2C_ADDR (0xCC >> 1) - -enum { LDO_OFF, LDO_ON }; - -#endif /* __MAX8998_PMIC_H_ */ diff --git a/include/pmic.h b/include/pmic.h deleted file mode 100644 index 1a2db051109..00000000000 --- a/include/pmic.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics - * Lukasz Majewski - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CORE_PMIC_H_ -#define __CORE_PMIC_H_ - -enum { PMIC_I2C, PMIC_SPI, }; -enum { I2C_PMIC, I2C_NUM, }; -enum { PMIC_READ, PMIC_WRITE, }; -enum { PMIC_SENSOR_BYTE_ORDER_LITTLE, PMIC_SENSOR_BYTE_ORDER_BIG, }; - -struct p_i2c { - unsigned char addr; - unsigned char *buf; - unsigned char tx_num; -}; - -struct p_spi { - unsigned int cs; - unsigned int mode; - unsigned int bitlen; - unsigned int clk; - unsigned int flags; - u32 (*prepare_tx)(u32 reg, u32 *val, u32 write); -}; - -struct pmic { - const char *name; - unsigned char bus; - unsigned char interface; - unsigned char sensor_byte_order; - unsigned char number_of_regs; - union hw { - struct p_i2c i2c; - struct p_spi spi; - } hw; -}; - -int pmic_init(void); -int pmic_dialog_init(void); -int check_reg(u32 reg); -struct pmic *get_pmic(void); -int pmic_probe(struct pmic *p); -int pmic_reg_read(struct pmic *p, u32 reg, u32 *val); -int pmic_reg_write(struct pmic *p, u32 reg, u32 val); -int pmic_set_output(struct pmic *p, u32 reg, int ldo, int on); - -#define pmic_i2c_addr (p->hw.i2c.addr) -#define pmic_i2c_tx_num (p->hw.i2c.tx_num) - -#define pmic_spi_bitlen (p->hw.spi.bitlen) -#define pmic_spi_flags (p->hw.spi.flags) - -#endif /* __CORE_PMIC_H_ */ diff --git a/include/power/max8997_pmic.h b/include/power/max8997_pmic.h new file mode 100644 index 00000000000..1db7deb3beb --- /dev/null +++ b/include/power/max8997_pmic.h @@ -0,0 +1,203 @@ +/* + * Copyright (C) 2011 Samsung Electronics + * Lukasz Majewski + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MAX8997_PMIC_H_ +#define __MAX8997_PMIC_H_ + +/* MAX 8997 registers */ +enum { + MAX8997_REG_PMIC_ID0 = 0x00, + MAX8997_REG_PMIC_ID1 = 0x01, + MAX8997_REG_INTSRC = 0x02, + MAX8997_REG_INT1 = 0x03, + MAX8997_REG_INT2 = 0x04, + MAX8997_REG_INT3 = 0x05, + MAX8997_REG_INT4 = 0x06, + + MAX8997_REG_INT1MSK = 0x08, + MAX8997_REG_INT2MSK = 0x09, + MAX8997_REG_INT3MSK = 0x0a, + MAX8997_REG_INT4MSK = 0x0b, + + MAX8997_REG_STATUS1 = 0x0d, + MAX8997_REG_STATUS2 = 0x0e, + MAX8997_REG_STATUS3 = 0x0f, + MAX8997_REG_STATUS4 = 0x10, + + MAX8997_REG_MAINCON1 = 0x13, + MAX8997_REG_MAINCON2 = 0x14, + MAX8997_REG_BUCKRAMP = 0x15, + + MAX8997_REG_BUCK1CTRL = 0x18, + MAX8997_REG_BUCK1DVS1 = 0x19, + MAX8997_REG_BUCK1DVS2 = 0x1a, + MAX8997_REG_BUCK1DVS3 = 0x1b, + MAX8997_REG_BUCK1DVS4 = 0x1c, + MAX8997_REG_BUCK1DVS5 = 0x1d, + MAX8997_REG_BUCK1DVS6 = 0x1e, + MAX8997_REG_BUCK1DVS7 = 0x1f, + MAX8997_REG_BUCK1DVS8 = 0x20, + MAX8997_REG_BUCK2CTRL = 0x21, + MAX8997_REG_BUCK2DVS1 = 0x22, + MAX8997_REG_BUCK2DVS2 = 0x23, + MAX8997_REG_BUCK2DVS3 = 0x24, + MAX8997_REG_BUCK2DVS4 = 0x25, + MAX8997_REG_BUCK2DVS5 = 0x26, + MAX8997_REG_BUCK2DVS6 = 0x27, + MAX8997_REG_BUCK2DVS7 = 0x28, + MAX8997_REG_BUCK2DVS8 = 0x29, + MAX8997_REG_BUCK3CTRL = 0x2a, + MAX8997_REG_BUCK3DVS = 0x2b, + MAX8997_REG_BUCK4CTRL = 0x2c, + MAX8997_REG_BUCK4DVS = 0x2d, + MAX8997_REG_BUCK5CTRL = 0x2e, + MAX8997_REG_BUCK5DVS1 = 0x2f, + MAX8997_REG_BUCK5DVS2 = 0x30, + MAX8997_REG_BUCK5DVS3 = 0x31, + MAX8997_REG_BUCK5DVS4 = 0x32, + MAX8997_REG_BUCK5DVS5 = 0x33, + MAX8997_REG_BUCK5DVS6 = 0x34, + MAX8997_REG_BUCK5DVS7 = 0x35, + MAX8997_REG_BUCK5DVS8 = 0x36, + MAX8997_REG_BUCK6CTRL = 0x37, + MAX8997_REG_BUCK6BPSKIPCTRL = 0x38, + MAX8997_REG_BUCK7CTRL = 0x39, + MAX8997_REG_BUCK7DVS = 0x3a, + MAX8997_REG_LDO1CTRL = 0x3b, + MAX8997_REG_LDO2CTRL = 0x3c, + MAX8997_REG_LDO3CTRL = 0x3d, + MAX8997_REG_LDO4CTRL = 0x3e, + MAX8997_REG_LDO5CTRL = 0x3f, + MAX8997_REG_LDO6CTRL = 0x40, + MAX8997_REG_LDO7CTRL = 0x41, + MAX8997_REG_LDO8CTRL = 0x42, + MAX8997_REG_LDO9CTRL = 0x43, + MAX8997_REG_LDO10CTRL = 0x44, + MAX8997_REG_LDO11CTRL = 0x45, + MAX8997_REG_LDO12CTRL = 0x46, + MAX8997_REG_LDO13CTRL = 0x47, + MAX8997_REG_LDO14CTRL = 0x48, + MAX8997_REG_LDO15CTRL = 0x49, + MAX8997_REG_LDO16CTRL = 0x4a, + MAX8997_REG_LDO17CTRL = 0x4b, + MAX8997_REG_LDO18CTRL = 0x4c, + MAX8997_REG_LDO21CTRL = 0x4d, + + MAX8997_REG_MBCCTRL1 = 0x50, + MAX8997_REG_MBCCTRL2 = 0x51, + MAX8997_REG_MBCCTRL3 = 0x52, + MAX8997_REG_MBCCTRL4 = 0x53, + MAX8997_REG_MBCCTRL5 = 0x54, + MAX8997_REG_MBCCTRL6 = 0x55, + MAX8997_REG_OTPCGHCVS = 0x56, + + MAX8997_REG_SAFEOUTCTRL = 0x5a, + + MAX8997_REG_LBCNFG1 = 0x5e, + MAX8997_REG_LBCNFG2 = 0x5f, + MAX8997_REG_BBCCTRL = 0x60, + + MAX8997_REG_FLASH1_CUR = 0x63, /* 0x63 ~ 0x6e for FLASH */ + MAX8997_REG_FLASH2_CUR = 0x64, + MAX8997_REG_MOVIE_CUR = 0x65, + MAX8997_REG_GSMB_CUR = 0x66, + MAX8997_REG_BOOST_CNTL = 0x67, + MAX8997_REG_LEN_CNTL = 0x68, + MAX8997_REG_FLASH_CNTL = 0x69, + MAX8997_REG_WDT_CNTL = 0x6a, + MAX8997_REG_MAXFLASH1 = 0x6b, + MAX8997_REG_MAXFLASH2 = 0x6c, + MAX8997_REG_FLASHSTATUS = 0x6d, + MAX8997_REG_FLASHSTATUSMASK = 0x6e, + + MAX8997_REG_GPIOCNTL1 = 0x70, + MAX8997_REG_GPIOCNTL2 = 0x71, + MAX8997_REG_GPIOCNTL3 = 0x72, + MAX8997_REG_GPIOCNTL4 = 0x73, + MAX8997_REG_GPIOCNTL5 = 0x74, + MAX8997_REG_GPIOCNTL6 = 0x75, + MAX8997_REG_GPIOCNTL7 = 0x76, + MAX8997_REG_GPIOCNTL8 = 0x77, + MAX8997_REG_GPIOCNTL9 = 0x78, + MAX8997_REG_GPIOCNTL10 = 0x79, + MAX8997_REG_GPIOCNTL11 = 0x7a, + MAX8997_REG_GPIOCNTL12 = 0x7b, + + MAX8997_REG_LDO1CONFIG = 0x80, + MAX8997_REG_LDO2CONFIG = 0x81, + MAX8997_REG_LDO3CONFIG = 0x82, + MAX8997_REG_LDO4CONFIG = 0x83, + MAX8997_REG_LDO5CONFIG = 0x84, + MAX8997_REG_LDO6CONFIG = 0x85, + MAX8997_REG_LDO7CONFIG = 0x86, + MAX8997_REG_LDO8CONFIG = 0x87, + MAX8997_REG_LDO9CONFIG = 0x88, + MAX8997_REG_LDO10CONFIG = 0x89, + MAX8997_REG_LDO11CONFIG = 0x8a, + MAX8997_REG_LDO12CONFIG = 0x8b, + MAX8997_REG_LDO13CONFIG = 0x8c, + MAX8997_REG_LDO14CONFIG = 0x8d, + MAX8997_REG_LDO15CONFIG = 0x8e, + MAX8997_REG_LDO16CONFIG = 0x8f, + MAX8997_REG_LDO17CONFIG = 0x90, + MAX8997_REG_LDO18CONFIG = 0x91, + MAX8997_REG_LDO21CONFIG = 0x92, + + MAX8997_REG_DVSOKTIMER1 = 0x97, + MAX8997_REG_DVSOKTIMER2 = 0x98, + MAX8997_REG_DVSOKTIMER4 = 0x99, + MAX8997_REG_DVSOKTIMER5 = 0x9a, + + PMIC_NUM_OF_REGS = 0x9b, +}; + +#define ACTDISSAFEO1 (1 << 4) +#define ACTDISSAFEO2 (1 << 5) +#define ENSAFEOUT1 (1 << 6) +#define ENSAFEOUT2 (1 << 7) + +/* Charger */ +enum {CHARGER_ENABLE, CHARGER_DISABLE}; +#define DETBAT (1 << 2) +#define MBCICHFCSET (1 << 4) +#define MBCHOSTEN (1 << 6) +#define VCHGR_FC (1 << 7) + +#define CHARGER_MIN_CURRENT 200 +#define CHARGER_MAX_CURRENT 950 +#define CHARGER_CURRENT_RESOLUTION 50 + +#define MAX8997_I2C_ADDR (0xCC >> 1) +#define MAX8997_RTC_ADDR (0x0C >> 1) +#define MAX8997_MUIC_ADDR (0x4A >> 1) +#define MAX8997_FG_ADDR (0x6C >> 1) + +enum { + LDO_OFF = 0, + LDO_ON = 1, + + DIS_LDO = (0x00 << 6), + EN_LDO = (0x3 << 6), +}; + +#endif /* __MAX8997_PMIC_H_ */ diff --git a/include/power/max8998_pmic.h b/include/power/max8998_pmic.h new file mode 100644 index 00000000000..ca21f882c29 --- /dev/null +++ b/include/power/max8998_pmic.h @@ -0,0 +1,86 @@ +/* + * Copyright (C) 2011 Samsung Electronics + * Lukasz Majewski + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MAX8998_PMIC_H_ +#define __MAX8998_PMIC_H_ + +/* MAX 8998 registers */ +enum { + MAX8998_REG_IRQ1, + MAX8998_REG_IRQ2, + MAX8998_REG_IRQ3, + MAX8998_REG_IRQ4, + MAX8998_REG_IRQM1, + MAX8998_REG_IRQM2, + MAX8998_REG_IRQM3, + MAX8998_REG_IRQM4, + MAX8998_REG_STATUS1, + MAX8998_REG_STATUS2, + MAX8998_REG_STATUSM1, + MAX8998_REG_STATUSM2, + MAX8998_REG_CHGR1, + MAX8998_REG_CHGR2, + MAX8998_REG_LDO_ACTIVE_DISCHARGE1, + MAX8998_REG_LDO_ACTIVE_DISCHARGE2, + MAX8998_REG_BUCK_ACTIVE_DISCHARGE3, + MAX8998_REG_ONOFF1, + MAX8998_REG_ONOFF2, + MAX8998_REG_ONOFF3, + MAX8998_REG_ONOFF4, + MAX8998_REG_BUCK1_VOLTAGE1, + MAX8998_REG_BUCK1_VOLTAGE2, + MAX8998_REG_BUCK1_VOLTAGE3, + MAX8998_REG_BUCK1_VOLTAGE4, + MAX8998_REG_BUCK2_VOLTAGE1, + MAX8998_REG_BUCK2_VOLTAGE2, + MAX8998_REG_BUCK3, + MAX8998_REG_BUCK4, + MAX8998_REG_LDO2_LDO3, + MAX8998_REG_LDO4, + MAX8998_REG_LDO5, + MAX8998_REG_LDO6, + MAX8998_REG_LDO7, + MAX8998_REG_LDO8_LDO9, + MAX8998_REG_LDO10_LDO11, + MAX8998_REG_LDO12, + MAX8998_REG_LDO13, + MAX8998_REG_LDO14, + MAX8998_REG_LDO15, + MAX8998_REG_LDO16, + MAX8998_REG_LDO17, + MAX8998_REG_BKCHR, + MAX8998_REG_LBCNFG1, + MAX8998_REG_LBCNFG2, + PMIC_NUM_OF_REGS, +}; + +#define MAX8998_LDO3 (1 << 2) +#define MAX8998_LDO4 (1 << 1) +#define MAX8998_LDO8 (1 << 5) +#define MAX8998_SAFEOUT1 (1 << 4) + +#define MAX8998_I2C_ADDR (0xCC >> 1) + +enum { LDO_OFF, LDO_ON }; + +#endif /* __MAX8998_PMIC_H_ */ diff --git a/include/power/pmic.h b/include/power/pmic.h new file mode 100644 index 00000000000..e9affc8dd60 --- /dev/null +++ b/include/power/pmic.h @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2011-2012 Samsung Electronics + * Lukasz Majewski + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CORE_PMIC_H_ +#define __CORE_PMIC_H_ + +#include +#include +#include + +enum { PMIC_I2C, PMIC_SPI, }; +enum { I2C_PMIC, I2C_NUM, }; +enum { PMIC_READ, PMIC_WRITE, }; +enum { PMIC_SENSOR_BYTE_ORDER_LITTLE, PMIC_SENSOR_BYTE_ORDER_BIG, }; + +struct p_i2c { + unsigned char addr; + unsigned char *buf; + unsigned char tx_num; +}; + +struct p_spi { + unsigned int cs; + unsigned int mode; + unsigned int bitlen; + unsigned int clk; + unsigned int flags; + u32 (*prepare_tx)(u32 reg, u32 *val, u32 write); +}; + +struct pmic { + const char *name; + unsigned char bus; + unsigned char interface; + unsigned char sensor_byte_order; + unsigned int number_of_regs; + union hw { + struct p_i2c i2c; + struct p_spi spi; + } hw; + + struct list_head list; +}; + +int pmic_init(unsigned char bus); +int pmic_dialog_init(unsigned char bus); +int check_reg(struct pmic *p, u32 reg); +struct pmic *pmic_alloc(void); +struct pmic *pmic_get(const char *s); +int pmic_probe(struct pmic *p); +int pmic_reg_read(struct pmic *p, u32 reg, u32 *val); +int pmic_reg_write(struct pmic *p, u32 reg, u32 val); +int pmic_set_output(struct pmic *p, u32 reg, int ldo, int on); + +#define pmic_i2c_addr (p->hw.i2c.addr) +#define pmic_i2c_tx_num (p->hw.i2c.tx_num) + +#define pmic_spi_bitlen (p->hw.spi.bitlen) +#define pmic_spi_flags (p->hw.spi.flags) + +#endif /* __CORE_PMIC_H_ */ -- cgit v1.3.1 From 9a1c4b22862119f39b1452208e12abe5947cec30 Mon Sep 17 00:00:00 2001 From: Łukasz Majewski Date: Tue, 13 Nov 2012 03:21:58 +0000 Subject: pmic:chrg: Common information about charger and battery (power_chrg.h) New power_chrg.h file has been added to "bind" together common information about charging battery available in the system. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Cc: Stefano Babic --- include/power/power_chrg.h | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 include/power/power_chrg.h (limited to 'include') diff --git a/include/power/power_chrg.h b/include/power/power_chrg.h new file mode 100644 index 00000000000..24c4cde739e --- /dev/null +++ b/include/power/power_chrg.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Lukasz Majewski + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __POWER_CHARGER_H_ +#define __POWER_CHARGER_H_ + +/* Type of available chargers */ +enum { + CHARGER_NO = 0, + CHARGER_TA, + CHARGER_USB, + CHARGER_TA_500, + CHARGER_UNKNOWN, +}; + +enum { + UNKNOWN, + EXT_SOURCE, + CHARGE, + NORMAL, +}; + +#endif /* __POWER_CHARGER_H_ */ -- cgit v1.3.1 From bd8479e8deca8d57c9b27096ced4153d9aacd962 Mon Sep 17 00:00:00 2001 From: Łukasz Majewski Date: Tue, 13 Nov 2012 03:22:00 +0000 Subject: pmic: Extend struct pmic to support battery and charger related operations Now it is possible to provide specific function per PMIC/power device instance. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park --- include/power/battery.h | 38 ++++++++++++++++++++++++++++++++++++++ include/power/pmic.h | 30 +++++++++++++++++++++++++++++- 2 files changed, 67 insertions(+), 1 deletion(-) create mode 100644 include/power/battery.h (limited to 'include') diff --git a/include/power/battery.h b/include/power/battery.h new file mode 100644 index 00000000000..e2fec687dab --- /dev/null +++ b/include/power/battery.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Lukasz Majewski + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __POWER_BATTERY_H_ +#define __POWER_BATTERY_H_ + +struct battery { + unsigned int version; + unsigned int state_of_chrg; + unsigned int time_to_empty; + unsigned int capacity; + unsigned int voltage_uV; + + unsigned int state; +}; + +int power_bat_init(unsigned char bus); +#endif /* __POWER_BATTERY_H_ */ diff --git a/include/power/pmic.h b/include/power/pmic.h index e9affc8dd60..1ecfc0543cc 100644 --- a/include/power/pmic.h +++ b/include/power/pmic.h @@ -27,8 +27,9 @@ #include #include #include +#include -enum { PMIC_I2C, PMIC_SPI, }; +enum { PMIC_I2C, PMIC_SPI, PMIC_NONE}; enum { I2C_PMIC, I2C_NUM, }; enum { PMIC_READ, PMIC_WRITE, }; enum { PMIC_SENSOR_BYTE_ORDER_LITTLE, PMIC_SENSOR_BYTE_ORDER_BIG, }; @@ -48,6 +49,27 @@ struct p_spi { u32 (*prepare_tx)(u32 reg, u32 *val, u32 write); }; +struct pmic; +struct power_fg { + int (*fg_battery_check) (struct pmic *p, struct pmic *bat); + int (*fg_battery_update) (struct pmic *p, struct pmic *bat); +}; + +struct power_chrg { + int (*chrg_type) (struct pmic *p); + int (*chrg_bat_present) (struct pmic *p); + int (*chrg_state) (struct pmic *p, int state, int current); +}; + +struct power_battery { + struct battery *bat; + int (*battery_init) (struct pmic *bat, struct pmic *p1, + struct pmic *p2, struct pmic *p3); + int (*battery_charge) (struct pmic *bat); + /* Keep info about power devices involved with battery operation */ + struct pmic *chrg, *fg, *muic; +}; + struct pmic { const char *name; unsigned char bus; @@ -59,6 +81,12 @@ struct pmic { struct p_spi spi; } hw; + void (*low_power_mode) (void); + struct power_battery *pbat; + struct power_chrg *chrg; + struct power_fg *fg; + + struct pmic *parent; struct list_head list; }; -- cgit v1.3.1 From 294a97da34529bb318996806651ac314b1734c1c Mon Sep 17 00:00:00 2001 From: Łukasz Majewski Date: Tue, 13 Nov 2012 03:22:02 +0000 Subject: pmic:muic: Support for MUIC built into MAX8997 device Support for MUIC (Micro USB Integrated Circuit) built into the MAX8997 power management device. The MUIC device will work with redesigned PMIC framework. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Cc: Stefano Babic --- drivers/power/pmic/Makefile | 1 + drivers/power/pmic/muic_max8997.c | 90 +++++++++++++++++++++++++++++++++++++++ include/power/max8997_muic.h | 61 ++++++++++++++++++++++++++ 3 files changed, 152 insertions(+) create mode 100644 drivers/power/pmic/muic_max8997.c create mode 100644 include/power/max8997_muic.h (limited to 'include') diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile index 8ccd6e97cad..9b71e55a254 100644 --- a/drivers/power/pmic/Makefile +++ b/drivers/power/pmic/Makefile @@ -27,6 +27,7 @@ LIB := $(obj)libpmic.o COBJS-$(CONFIG_PMIC_MAX8998) += pmic_max8998.o COBJS-$(CONFIG_PMIC_MAX8997) += pmic_max8997.o +COBJS-$(CONFIG_POWER_MUIC_MAX8997) += muic_max8997.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/power/pmic/muic_max8997.c b/drivers/power/pmic/muic_max8997.c new file mode 100644 index 00000000000..d5095c899ef --- /dev/null +++ b/drivers/power/pmic/muic_max8997.c @@ -0,0 +1,90 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Lukasz Majewski + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +static int power_chrg_get_type(struct pmic *p) +{ + unsigned int val; + unsigned char charge_type, charger; + + if (pmic_probe(p)) + return CHARGER_NO; + + pmic_reg_read(p, MAX8997_MUIC_STATUS2, &val); + charge_type = val & MAX8997_MUIC_CHG_MASK; + + switch (charge_type) { + case MAX8997_MUIC_CHG_NO: + charger = CHARGER_NO; + break; + case MAX8997_MUIC_CHG_USB: + case MAX8997_MUIC_CHG_USB_D: + charger = CHARGER_USB; + break; + case MAX8997_MUIC_CHG_TA: + case MAX8997_MUIC_CHG_TA_1A: + charger = CHARGER_TA; + break; + case MAX8997_MUIC_CHG_TA_500: + charger = CHARGER_TA_500; + break; + default: + charger = CHARGER_UNKNOWN; + break; + } + + return charger; +} + +static struct power_chrg power_chrg_muic_ops = { + .chrg_type = power_chrg_get_type, +}; + +int power_muic_init(unsigned int bus) +{ + static const char name[] = "MAX8997_MUIC"; + struct pmic *p = pmic_alloc(); + + if (!p) { + printf("%s: POWER allocation error!\n", __func__); + return -ENOMEM; + } + + debug("Board Micro USB Interface Controller init\n"); + + p->name = name; + p->interface = PMIC_I2C; + p->number_of_regs = MUIC_NUM_OF_REGS; + p->hw.i2c.addr = MAX8997_MUIC_I2C_ADDR; + p->hw.i2c.tx_num = 1; + p->bus = bus; + + p->chrg = &power_chrg_muic_ops; + return 0; +} diff --git a/include/power/max8997_muic.h b/include/power/max8997_muic.h new file mode 100644 index 00000000000..0149c124356 --- /dev/null +++ b/include/power/max8997_muic.h @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Lukasz Majewski + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MAX8997_MUIC_H_ +#define __MAX8997_MUIC_H_ + +#include + +/* MAX8997_MUIC_STATUS2 */ +#define MAX8997_MUIC_CHG_NO 0x00 +#define MAX8997_MUIC_CHG_USB 0x01 +#define MAX8997_MUIC_CHG_USB_D 0x02 +#define MAX8997_MUIC_CHG_TA 0x03 +#define MAX8997_MUIC_CHG_TA_500 0x04 +#define MAX8997_MUIC_CHG_TA_1A 0x05 +#define MAX8997_MUIC_CHG_MASK 0x07 + +/* MAX 8997 MUIC registers */ +enum { + MAX8997_MUIC_ID = 0x00, + MAX8997_MUIC_INT1 = 0x01, + MAX8997_MUIC_INT2 = 0x02, + MAX8997_MUIC_INT3 = 0x03, + MAX8997_MUIC_STATUS1 = 0x04, + MAX8997_MUIC_STATUS2 = 0x05, + MAX8997_MUIC_STATUS3 = 0x06, + MAX8997_MUIC_INTMASK1 = 0x07, + MAX8997_MUIC_INTMASK2 = 0x08, + MAX8997_MUIC_INTMASK3 = 0x09, + MAX8997_MUIC_CDETCTRL = 0x0A, + MAX8997_MUIC_CONTROL1 = 0x0C, + MAX8997_MUIC_CONTROL2 = 0x0D, + MAX8997_MUIC_CONTROL3 = 0x0E, + + MUIC_NUM_OF_REGS = 0x0F, +}; + +#define MAX8997_MUIC_I2C_ADDR (0x4A >> 1) + +int power_muic_init(unsigned int bus); +#endif /* __MAX8997_MUIC_H_ */ -- cgit v1.3.1 From b95aacd332cde91299cf05e1a87dc6d7de545adb Mon Sep 17 00:00:00 2001 From: Łukasz Majewski Date: Tue, 13 Nov 2012 03:22:03 +0000 Subject: pmic:fuel-gauge: Support for MAX17042 fuel-gauge Support for MAX17042 fuel-gauge (FG), which is built into the MAX8997 power management device. Special file - fg_battery_cell_params.h with cells characteristics added. The FG device will work with redesigned PMIC framework. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Cc: Stefano Babic --- Makefile | 1 + drivers/power/fuel_gauge/Makefile | 47 +++++++ drivers/power/fuel_gauge/fg_max17042.c | 250 +++++++++++++++++++++++++++++++++ include/power/fg_battery_cell_params.h | 90 ++++++++++++ include/power/max17042_fg.h | 74 ++++++++++ 5 files changed, 462 insertions(+) create mode 100644 drivers/power/fuel_gauge/Makefile create mode 100644 drivers/power/fuel_gauge/fg_max17042.c create mode 100644 include/power/fg_battery_cell_params.h create mode 100644 include/power/max17042_fg.h (limited to 'include') diff --git a/Makefile b/Makefile index 0f18e6cf3dd..1a17be9dbe2 100644 --- a/Makefile +++ b/Makefile @@ -294,6 +294,7 @@ LIBS-y += drivers/net/phy/libphy.o LIBS-y += drivers/pci/libpci.o LIBS-y += drivers/pcmcia/libpcmcia.o LIBS-y += drivers/power/libpower.o \ + drivers/power/fuel_gauge/libfuel_gauge.o \ drivers/power/pmic/libpmic.o \ drivers/power/battery/libbattery.o LIBS-y += drivers/spi/libspi.o diff --git a/drivers/power/fuel_gauge/Makefile b/drivers/power/fuel_gauge/Makefile new file mode 100644 index 00000000000..da1541412b8 --- /dev/null +++ b/drivers/power/fuel_gauge/Makefile @@ -0,0 +1,47 @@ +# +# Copyright (C) 2012 Samsung Electronics +# Lukasz Majewski +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libfuel_gauge.o + +COBJS-$(CONFIG_POWER_FG_MAX17042) += fg_max17042.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################## diff --git a/drivers/power/fuel_gauge/fg_max17042.c b/drivers/power/fuel_gauge/fg_max17042.c new file mode 100644 index 00000000000..9b7c184cb0f --- /dev/null +++ b/drivers/power/fuel_gauge/fg_max17042.c @@ -0,0 +1,250 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Lukasz Majewski + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int fg_write_regs(struct pmic *p, u8 addr, u16 *data, int num) +{ + int ret = 0; + int i; + + for (i = 0; i < num; i++, addr++) + ret |= pmic_reg_write(p, addr, *(data + i)); + + return ret; +} + +static int fg_read_regs(struct pmic *p, u8 addr, u16 *data, int num) +{ + int ret = 0; + int i; + + for (i = 0; i < num; i++, addr++) + ret |= pmic_reg_read(p, addr, (u32 *) (data + i)); + + return ret; +} + +static int fg_write_and_verify(struct pmic *p, u8 addr, u16 data) +{ + unsigned int val = data; + int ret = 0; + + ret |= pmic_reg_write(p, addr, val); + ret |= pmic_reg_read(p, addr, &val); + + if (ret) + return ret; + + if (((u16) val) == data) + return 0; + + return -1; +} + +static void por_fuelgauge_init(struct pmic *p) +{ + u16 r_data0[16], r_data1[16], r_data2[16]; + u32 rewrite_count = 5, i = 0; + unsigned int val; + int ret = 0; + + /* Delay 500 ms */ + mdelay(500); + /* Initilize Configuration */ + pmic_reg_write(p, MAX17042_CONFIG, 0x2310); + +rewrite_model: + /* Unlock Model Access */ + pmic_reg_write(p, MAX17042_MLOCKReg1, MODEL_UNLOCK1); + pmic_reg_write(p, MAX17042_MLOCKReg2, MODEL_UNLOCK2); + + /* Write/Read/Verify the Custom Model */ + ret |= fg_write_regs(p, MAX17042_MODEL1, cell_character0, + ARRAY_SIZE(cell_character0)); + ret |= fg_write_regs(p, MAX17042_MODEL2, cell_character1, + ARRAY_SIZE(cell_character1)); + ret |= fg_write_regs(p, MAX17042_MODEL3, cell_character2, + ARRAY_SIZE(cell_character2)); + + if (ret) { + printf("%s: Cell parameters write failed!\n", __func__); + return; + } + + ret |= fg_read_regs(p, MAX17042_MODEL1, r_data0, ARRAY_SIZE(r_data0)); + ret |= fg_read_regs(p, MAX17042_MODEL2, r_data1, ARRAY_SIZE(r_data1)); + ret |= fg_read_regs(p, MAX17042_MODEL3, r_data2, ARRAY_SIZE(r_data2)); + + if (ret) + printf("%s: Cell parameters read failed!\n", __func__); + + for (i = 0; i < 16; i++) { + if ((cell_character0[i] != r_data0[i]) + || (cell_character1[i] != r_data1[i]) + || (cell_character2[i] != r_data2[i])) + goto rewrite_model; + } + + /* Lock model access */ + pmic_reg_write(p, MAX17042_MLOCKReg1, MODEL_LOCK1); + pmic_reg_write(p, MAX17042_MLOCKReg2, MODEL_LOCK2); + + /* Verify the model access is locked */ + ret |= fg_read_regs(p, MAX17042_MODEL1, r_data0, ARRAY_SIZE(r_data0)); + ret |= fg_read_regs(p, MAX17042_MODEL2, r_data1, ARRAY_SIZE(r_data1)); + ret |= fg_read_regs(p, MAX17042_MODEL3, r_data2, ARRAY_SIZE(r_data2)); + + if (ret) { + printf("%s: Cell parameters read failed!\n", __func__); + return; + } + + for (i = 0; i < ARRAY_SIZE(r_data0); i++) { + /* Check if model locked */ + if (r_data0[i] || r_data1[i] || r_data2[i]) { + /* Rewrite model data - prevent from endless loop */ + if (rewrite_count--) { + puts("FG - Lock model access failed!\n"); + goto rewrite_model; + } + } + } + + /* Write Custom Parameters */ + fg_write_and_verify(p, MAX17042_RCOMP0, RCOMP0); + fg_write_and_verify(p, MAX17042_TEMPCO, TempCo); + + /* Delay at least 350mS */ + mdelay(350); + + /* Initialization Complete */ + pmic_reg_read(p, MAX17042_STATUS, &val); + /* Write and Verify Status with POR bit Cleared */ + fg_write_and_verify(p, MAX17042_STATUS, val & ~MAX17042_POR); + + /* Delay at least 350 ms */ + mdelay(350); +} + +static int power_update_battery(struct pmic *p, struct pmic *bat) +{ + struct power_battery *pb = bat->pbat; + unsigned int val; + int ret = 0; + + if (pmic_probe(p)) { + puts("Can't find max17042 fuel gauge\n"); + return -1; + } + + ret |= pmic_reg_read(p, MAX17042_VFSOC, &val); + pb->bat->state_of_chrg = (val >> 8); + + pmic_reg_read(p, MAX17042_VCELL, &val); + debug("vfsoc: 0x%x\n", val); + pb->bat->voltage_uV = ((val & 0xFFUL) >> 3) + ((val & 0xFF00) >> 3); + pb->bat->voltage_uV = (pb->bat->voltage_uV * 625); + + pmic_reg_read(p, 0x05, &val); + pb->bat->capacity = val >> 2; + + return ret; +} + +static int power_check_battery(struct pmic *p, struct pmic *bat) +{ + struct power_battery *pb = bat->pbat; + unsigned int val; + int ret = 0; + + if (pmic_probe(p)) { + puts("Can't find max17042 fuel gauge\n"); + return -1; + } + + ret |= pmic_reg_read(p, MAX17042_STATUS, &val); + debug("fg status: 0x%x\n", val); + + if (val == MAX17042_POR) + por_fuelgauge_init(p); + + ret |= pmic_reg_read(p, MAX17042_VERSION, &val); + pb->bat->version = val; + + power_update_battery(p, bat); + debug("fg ver: 0x%x\n", pb->bat->version); + printf("BAT: state_of_charge(SOC):%d%%\n", + pb->bat->state_of_chrg); + + printf(" voltage: %d.%6.6d [V] (expected to be %d [mAh])\n", + pb->bat->voltage_uV / 1000000, + pb->bat->voltage_uV % 1000000, + pb->bat->capacity); + + if (pb->bat->voltage_uV > 3850000) + pb->bat->state = EXT_SOURCE; + else if (pb->bat->voltage_uV < 3600000 || pb->bat->state_of_chrg < 5) + pb->bat->state = CHARGE; + else + pb->bat->state = NORMAL; + + return ret; +} + +static struct power_fg power_fg_ops = { + .fg_battery_check = power_check_battery, + .fg_battery_update = power_update_battery, +}; + +int power_fg_init(unsigned char bus) +{ + static const char name[] = "MAX17042_FG"; + struct pmic *p = pmic_alloc(); + + if (!p) { + printf("%s: POWER allocation error!\n", __func__); + return -ENOMEM; + } + + debug("Board Fuel Gauge init\n"); + + p->name = name; + p->interface = PMIC_I2C; + p->number_of_regs = FG_NUM_OF_REGS; + p->hw.i2c.addr = MAX17042_I2C_ADDR; + p->hw.i2c.tx_num = 2; + p->sensor_byte_order = PMIC_SENSOR_BYTE_ORDER_BIG; + p->bus = bus; + + p->fg = &power_fg_ops; + return 0; +} diff --git a/include/power/fg_battery_cell_params.h b/include/power/fg_battery_cell_params.h new file mode 100644 index 00000000000..7ddf6f2ffa8 --- /dev/null +++ b/include/power/fg_battery_cell_params.h @@ -0,0 +1,90 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Lukasz Majewski + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __FG_BATTERY_CELL_PARAMS_H_ +#define __FG_BATTERY_CELL_PARAMS_H_ + +#if defined(CONFIG_POWER_FG_MAX17042) && defined(CONFIG_TRATS) + +/* Cell characteristics - Exynos4 TRATS development board */ +/* Shall be written to addr 0x80h */ +u16 cell_character0[16] = { + 0xA2A0, + 0xB6E0, + 0xB850, + 0xBAD0, + 0xBB20, + 0xBB70, + 0xBBC0, + 0xBC20, + 0xBC80, + 0xBCE0, + 0xBD80, + 0xBE20, + 0xC090, + 0xC420, + 0xC910, + 0xD070 +}; + +/* Shall be written to addr 0x90h */ +u16 cell_character1[16] = { + 0x0090, + 0x1A50, + 0x02F0, + 0x2060, + 0x2060, + 0x2E60, + 0x26A0, + 0x2DB0, + 0x2DB0, + 0x1870, + 0x2A20, + 0x16F0, + 0x08F0, + 0x0D40, + 0x08C0, + 0x08C0 +}; + +/* Shall be written to addr 0xA0h */ +u16 cell_character2[16] = { + 0x0100, + 0x0100, + 0x0100, + 0x0100, + 0x0100, + 0x0100, + 0x0100, + 0x0100, + 0x0100, + 0x0100, + 0x0100, + 0x0100, + 0x0100, + 0x0100, + 0x0100, + 0x0100 +}; +#endif +#endif /* __FG_BATTERY_CELL_PARAMS_H_ */ diff --git a/include/power/max17042_fg.h b/include/power/max17042_fg.h new file mode 100644 index 00000000000..1103a483f20 --- /dev/null +++ b/include/power/max17042_fg.h @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Lukasz Majewski + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MAX17042_FG_H_ +#define __MAX17042_FG_H_ + +/* MAX 17042 registers */ +enum { + MAX17042_STATUS = 0x00, + MAX17042_SOCREP = 0x06, + MAX17042_VCELL = 0x09, + MAX17042_CURRENT = 0x0A, + MAX17042_AVG_CURRENT = 0x0B, + MAX17042_SOCMIX = 0x0D, + MAX17042_SOCAV = 0x0E, + MAX17042_DESIGN_CAP = 0x18, + MAX17042_AVG_VCELL = 0x19, + MAX17042_CONFIG = 0x1D, + MAX17042_VERSION = 0x21, + MAX17042_LEARNCFG = 0x28, + MAX17042_FILTERCFG = 0x29, + MAX17042_RELAXCFG = 0x2A, + MAX17042_MISCCFG = 0x2B, + MAX17042_CGAIN = 0x2E, + MAX17042_COFF = 0x2F, + MAX17042_RCOMP0 = 0x38, + MAX17042_TEMPCO = 0x39, + MAX17042_FSTAT = 0x3D, + MAX17042_MLOCKReg1 = 0x62, + MAX17042_MLOCKReg2 = 0x63, + MAX17042_MODEL1 = 0x80, + MAX17042_MODEL2 = 0x90, + MAX17042_MODEL3 = 0xA0, + MAX17042_VFOCV = 0xFB, + MAX17042_VFSOC = 0xFF, + + FG_NUM_OF_REGS = 0x100, +}; + +#define RCOMP0 0x0060 +#define TempCo 0x1015 + + +#define MAX17042_POR (1 << 1) + +#define MODEL_UNLOCK1 0x0059 +#define MODEL_UNLOCK2 0x00c4 +#define MODEL_LOCK1 0x0000 +#define MODEL_LOCK2 0x0000 + +#define MAX17042_I2C_ADDR (0x6C >> 1) + +int power_fg_init(unsigned char bus); +#endif /* __MAX17042_FG_H_ */ -- cgit v1.3.1 From bf995a9a28c7a987be0b3df9d4f84da63c9bfb1c Mon Sep 17 00:00:00 2001 From: Łukasz Majewski Date: Tue, 13 Nov 2012 03:22:04 +0000 Subject: pmic:max8997: Function for calculating LDO internal register value Function for calculating LDO internal register value from passed micro Volt. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Cc: Stefano Babic --- drivers/power/pmic/pmic_max8997.c | 16 ++++++++++++++++ include/power/max8997_pmic.h | 2 ++ 2 files changed, 18 insertions(+) (limited to 'include') diff --git a/drivers/power/pmic/pmic_max8997.c b/drivers/power/pmic/pmic_max8997.c index 7fe1b53ff07..2e46884dd68 100644 --- a/drivers/power/pmic/pmic_max8997.c +++ b/drivers/power/pmic/pmic_max8997.c @@ -27,6 +27,22 @@ #include #include +unsigned char max8997_reg_ldo(int uV) +{ + unsigned char ret; + if (uV <= 800000) + return 0; + if (uV >= 3950000) + return MAX8997_LDO_MAX_VAL; + ret = (uV - 800000) / 50000; + if (ret > MAX8997_LDO_MAX_VAL) { + printf("MAX8997 LDO SETTING ERROR (%duV) -> %u\n", uV, ret); + ret = MAX8997_LDO_MAX_VAL; + } + + return ret; +} + int pmic_init(unsigned char bus) { static const char name[] = "MAX8997_PMIC"; diff --git a/include/power/max8997_pmic.h b/include/power/max8997_pmic.h index 1db7deb3beb..03cac041f19 100644 --- a/include/power/max8997_pmic.h +++ b/include/power/max8997_pmic.h @@ -200,4 +200,6 @@ enum { EN_LDO = (0x3 << 6), }; +#define MAX8997_LDO_MAX_VAL 0x3F +unsigned char max8997_reg_ldo(int uV); #endif /* __MAX8997_PMIC_H_ */ -- cgit v1.3.1 From a52a7b14775bf54b3c6e279146e4f58c010b6823 Mon Sep 17 00:00:00 2001 From: Łukasz Majewski Date: Tue, 13 Nov 2012 03:22:05 +0000 Subject: arm:trats:pmic: Default PMIC(MAX8997) initialization for Samsung's TRATS board Default PMIC (MAX8997) initialization for Samsung's TRATS development board. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Cc: Minkyu Kang --- board/samsung/trats/trats.c | 151 +++++++++++++++++++++++++++++++++++++++++++ include/power/max8997_pmic.h | 9 +++ 2 files changed, 160 insertions(+) (limited to 'include') diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index 1fa10ef056c..ebbc7abd1f8 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -86,11 +86,162 @@ void i2c_init_board(void) s5p_gpio_direction_output(&gpio2->y4, 1, 1); } +static int pmic_init_max8997(void) +{ + struct pmic *p = pmic_get("MAX8997_PMIC"); + int i = 0, ret = 0; + u32 val; + + if (pmic_probe(p)) + return -1; + + /* BUCK1 VARM: 1.2V */ + val = (1200000 - 650000) / 25000; + ret |= pmic_reg_write(p, MAX8997_REG_BUCK1DVS1, val); + val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_BUCK1CTRL, val); + + /* BUCK2 VINT: 1.1V */ + val = (1100000 - 650000) / 25000; + ret |= pmic_reg_write(p, MAX8997_REG_BUCK2DVS1, val); + val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_BUCK2CTRL, val); + + + /* BUCK3 G3D: 1.1V - OFF */ + ret |= pmic_reg_read(p, MAX8997_REG_BUCK3CTRL, &val); + val &= ~ENBUCK; + ret |= pmic_reg_write(p, MAX8997_REG_BUCK3CTRL, val); + + val = (1100000 - 750000) / 50000; + ret |= pmic_reg_write(p, MAX8997_REG_BUCK3DVS, val); + + /* BUCK4 CAMISP: 1.2V - OFF */ + ret |= pmic_reg_read(p, MAX8997_REG_BUCK4CTRL, &val); + val &= ~ENBUCK; + ret |= pmic_reg_write(p, MAX8997_REG_BUCK4CTRL, val); + + val = (1200000 - 650000) / 25000; + ret |= pmic_reg_write(p, MAX8997_REG_BUCK4DVS, val); + + /* BUCK5 VMEM: 1.2V */ + val = (1200000 - 650000) / 25000; + for (i = 0; i < 8; i++) + ret |= pmic_reg_write(p, MAX8997_REG_BUCK5DVS1 + i, val); + + val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_BUCK5CTRL, val); + + /* BUCK6 CAM AF: 2.8V */ + /* No Voltage Setting Register */ + /* GNSLCT 3.0X */ + val = GNSLCT; + ret |= pmic_reg_write(p, MAX8997_REG_BUCK6CTRL, val); + + /* BUCK7 VCC_SUB: 2.0V */ + val = (2000000 - 750000) / 50000; + ret |= pmic_reg_write(p, MAX8997_REG_BUCK7DVS, val); + + /* LDO1 VADC: 3.3V */ + val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO1CTRL, val); + + /* LDO1 Disable active discharging */ + ret |= pmic_reg_read(p, MAX8997_REG_LDO1CONFIG, &val); + val &= ~LDO_ADE; + ret |= pmic_reg_write(p, MAX8997_REG_LDO1CONFIG, val); + + /* LDO2 VALIVE: 1.1V */ + val = max8997_reg_ldo(1100000) | EN_LDO; + ret |= pmic_reg_write(p, MAX8997_REG_LDO2CTRL, val); + + /* LDO3 VUSB/MIPI: 1.1V */ + val = max8997_reg_ldo(1100000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, val); + + /* LDO4 VMIPI: 1.8V */ + val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO4CTRL, val); + + /* LDO5 VHSIC: 1.2V */ + val = max8997_reg_ldo(1200000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO5CTRL, val); + + /* LDO6 VCC_1.8V_PDA: 1.8V */ + val = max8997_reg_ldo(1800000) | EN_LDO; + ret |= pmic_reg_write(p, MAX8997_REG_LDO6CTRL, val); + + /* LDO7 CAM_ISP: 1.8V */ + val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO7CTRL, val); + + /* LDO8 VDAC/VUSB: 3.3V */ + val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, val); + + /* LDO9 VCC_2.8V_PDA: 2.8V */ + val = max8997_reg_ldo(2800000) | EN_LDO; + ret |= pmic_reg_write(p, MAX8997_REG_LDO9CTRL, val); + + /* LDO10 VPLL: 1.1V */ + val = max8997_reg_ldo(1100000) | EN_LDO; + ret |= pmic_reg_write(p, MAX8997_REG_LDO10CTRL, val); + + /* LDO11 TOUCH: 2.8V */ + val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO11CTRL, val); + + /* LDO12 VTCAM: 1.8V */ + val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO12CTRL, val); + + /* LDO13 VCC_3.0_LCD: 3.0V */ + val = max8997_reg_ldo(3000000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO13CTRL, val); + + /* LDO14 MOTOR: 3.0V */ + val = max8997_reg_ldo(3000000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO14CTRL, val); + + /* LDO15 LED_A: 2.8V */ + val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO15CTRL, val); + + /* LDO16 CAM_SENSOR: 1.8V */ + val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO16CTRL, val); + + /* LDO17 VTF: 2.8V */ + val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO17CTRL, val); + + /* LDO18 TOUCH_LED 3.3V */ + val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO18CTRL, val); + + /* LDO21 VDDQ: 1.2V */ + val = max8997_reg_ldo(1200000) | EN_LDO; + ret |= pmic_reg_write(p, MAX8997_REG_LDO21CTRL, val); + + /* SAFEOUT for both 1 and 2: 4.9V, Active discharge, Enable */ + val = (SAFEOUT_4_90V << 0) | (SAFEOUT_4_90V << 2) | + ACTDISSAFEO1 | ACTDISSAFEO2 | ENSAFEOUT1 | ENSAFEOUT2; + ret |= pmic_reg_write(p, MAX8997_REG_SAFEOUTCTRL, val); + + if (ret) { + puts("MAX8997 PMIC setting error!\n"); + return -1; + } + return 0; +} + int power_init_board(void) { int ret; ret = pmic_init(I2C_5); + ret |= pmic_init_max8997(); + if (ret) return ret; diff --git a/include/power/max8997_pmic.h b/include/power/max8997_pmic.h index 03cac041f19..5d2d94df9bc 100644 --- a/include/power/max8997_pmic.h +++ b/include/power/max8997_pmic.h @@ -176,6 +176,15 @@ enum { #define ENSAFEOUT1 (1 << 6) #define ENSAFEOUT2 (1 << 7) +#define ENBUCK (1 << 0) +#define ACTIVE_DISCHARGE (1 << 3) +#define GNSLCT (1 << 2) +#define LDO_ADE (1 << 1) +#define SAFEOUT_4_85V 0x00 +#define SAFEOUT_4_90V 0x01 +#define SAFEOUT_4_95V 0x02 +#define SAFEOUT_3_30V 0x03 + /* Charger */ enum {CHARGER_ENABLE, CHARGER_DISABLE}; #define DETBAT (1 << 2) -- cgit v1.3.1 From 7dcda99d4f1f9f966383609b72edad4b76e9aad4 Mon Sep 17 00:00:00 2001 From: Łukasz Majewski Date: Tue, 13 Nov 2012 03:22:06 +0000 Subject: arm:trats:pmic: Enable MUIC (MAX8997) at Samsung's TRATS board MUIC IC built into the MAX8997 device is enabled at TRATS. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Cc: Minkyu Kang --- board/samsung/trats/trats.c | 3 ++- include/configs/trats.h | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index ebbc7abd1f8..2359a99fc4e 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -38,6 +38,7 @@ #include #include #include +#include #include "setup.h" @@ -241,7 +242,7 @@ int power_init_board(void) ret = pmic_init(I2C_5); ret |= pmic_init_max8997(); - + ret |= power_muic_init(I2C_5); if (ret) return ret; diff --git a/include/configs/trats.h b/include/configs/trats.h index d7808aa7123..74c4a237734 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -238,6 +238,8 @@ #define CONFIG_PMIC_I2C #define CONFIG_PMIC_MAX8997 +#define CONFIG_POWER_MUIC +#define CONFIG_POWER_MUIC_MAX8997 #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_S3C_UDC_OTG #define CONFIG_USB_GADGET_DUALSPEED -- cgit v1.3.1 From 5a77358c4b870a58ed68f5fcff32534c47f38b19 Mon Sep 17 00:00:00 2001 From: Łukasz Majewski Date: Tue, 13 Nov 2012 03:22:07 +0000 Subject: arm:trats:pmic: Enable fuel-gauge (MAX17042) at Samsung's TRATS board FG IC built into the MAX8997 device (compliant to MAX17042) is enabled at TRATS. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Cc: Minkyu Kang --- board/samsung/trats/trats.c | 2 ++ include/configs/trats.h | 2 ++ 2 files changed, 4 insertions(+) (limited to 'include') diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index 2359a99fc4e..6c2f199c598 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -39,6 +39,7 @@ #include #include #include +#include #include "setup.h" @@ -242,6 +243,7 @@ int power_init_board(void) ret = pmic_init(I2C_5); ret |= pmic_init_max8997(); + ret |= power_fg_init(I2C_9); ret |= power_muic_init(I2C_5); if (ret) return ret; diff --git a/include/configs/trats.h b/include/configs/trats.h index 74c4a237734..0bc1f3abc0c 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -238,6 +238,8 @@ #define CONFIG_PMIC_I2C #define CONFIG_PMIC_MAX8997 +#define CONFIG_POWER_FG +#define CONFIG_POWER_FG_MAX17042 #define CONFIG_POWER_MUIC #define CONFIG_POWER_MUIC_MAX8997 #define CONFIG_USB_GADGET -- cgit v1.3.1 From 61365ffc2efc52717af1b4c38a71b4a3d8c77149 Mon Sep 17 00:00:00 2001 From: Łukasz Majewski Date: Tue, 13 Nov 2012 03:22:08 +0000 Subject: arm:trats:pmic: Enable battery support at Samsung's TRATS board Support for TRATS battery has been added. It is treated as a "normal" power related device and thereof controlled by pmic/power subsystem. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Cc: Minkyu Kang --- board/samsung/trats/trats.c | 2 ++ include/configs/trats.h | 2 ++ 2 files changed, 4 insertions(+) (limited to 'include') diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index 6c2f199c598..94bf5c0de10 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include "setup.h" @@ -245,6 +246,7 @@ int power_init_board(void) ret |= pmic_init_max8997(); ret |= power_fg_init(I2C_9); ret |= power_muic_init(I2C_5); + ret |= power_bat_init(0); if (ret) return ret; diff --git a/include/configs/trats.h b/include/configs/trats.h index 0bc1f3abc0c..2fdc597c000 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -242,6 +242,8 @@ #define CONFIG_POWER_FG_MAX17042 #define CONFIG_POWER_MUIC #define CONFIG_POWER_MUIC_MAX8997 +#define CONFIG_POWER_BATTERY +#define CONFIG_POWER_BATTERY_TRATS #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_S3C_UDC_OTG #define CONFIG_USB_GADGET_DUALSPEED -- cgit v1.3.1 From be3b51aa4a450f3e3fcd9c6e5074ef435812a02d Mon Sep 17 00:00:00 2001 From: Łukasz Majewski Date: Tue, 13 Nov 2012 03:22:14 +0000 Subject: power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER Rename all CONFIG_PMIC* defines to CONFIG_POWER* Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Cc: Stefano Babic --- board/samsung/goni/goni.c | 2 +- board/samsung/universal_c210/universal.c | 2 +- drivers/power/Makefile | 8 ++++---- drivers/power/pmic/Makefile | 4 ++-- drivers/power/power_fsl.c | 8 ++++---- include/configs/imx31_litekit.h | 6 +++--- include/configs/mx31ads.h | 6 +++--- include/configs/mx31pdk.h | 6 +++--- include/configs/mx35pdk.h | 6 +++--- include/configs/mx51_efikamx.h | 6 +++--- include/configs/mx51evk.h | 6 +++--- include/configs/mx53evk.h | 6 +++--- include/configs/mx53loco.h | 6 +++--- include/configs/qong.h | 6 +++--- include/configs/s5p_goni.h | 6 +++--- include/configs/s5pc210_universal.h | 6 +++--- include/configs/trats.h | 6 +++--- include/configs/tt01.h | 6 +++--- include/configs/vision2.h | 6 +++--- 19 files changed, 54 insertions(+), 54 deletions(-) (limited to 'include') diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c index 71ed618c6fd..50e92104e15 100644 --- a/board/samsung/goni/goni.c +++ b/board/samsung/goni/goni.c @@ -41,7 +41,7 @@ int board_init(void) gd->bd->bi_arch_number = MACH_TYPE_GONI; gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; -#if defined(CONFIG_PMIC) +#if defined(CONFIG_POWER) pmic_init(I2C_5); #endif diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index c4950ddc269..9849c6d1118 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -58,7 +58,7 @@ int board_init(void) gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210; gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; -#if defined(CONFIG_PMIC) +#if defined(CONFIG_POWER) pmic_init(I2C_5); #endif diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 7733e01a448..2723724a35f 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -31,11 +31,11 @@ COBJS-$(CONFIG_TWL4030_POWER) += twl4030.o COBJS-$(CONFIG_TWL6030_POWER) += twl6030.o COBJS-$(CONFIG_TWL6035_POWER) += twl6035.o -COBJS-$(CONFIG_PMIC) += power_core.o +COBJS-$(CONFIG_POWER) += power_core.o COBJS-$(CONFIG_DIALOG_PMIC) += power_dialog.o -COBJS-$(CONFIG_PMIC_FSL) += power_fsl.o -COBJS-$(CONFIG_PMIC_I2C) += power_i2c.o -COBJS-$(CONFIG_PMIC_SPI) += power_spi.o +COBJS-$(CONFIG_POWER_FSL) += power_fsl.o +COBJS-$(CONFIG_POWER_I2C) += power_i2c.o +COBJS-$(CONFIG_POWER_SPI) += power_spi.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile index 9b71e55a254..e19a9a81950 100644 --- a/drivers/power/pmic/Makefile +++ b/drivers/power/pmic/Makefile @@ -25,8 +25,8 @@ include $(TOPDIR)/config.mk LIB := $(obj)libpmic.o -COBJS-$(CONFIG_PMIC_MAX8998) += pmic_max8998.o -COBJS-$(CONFIG_PMIC_MAX8997) += pmic_max8997.o +COBJS-$(CONFIG_POWER_MAX8998) += pmic_max8998.o +COBJS-$(CONFIG_POWER_MAX8997) += pmic_max8997.o COBJS-$(CONFIG_POWER_MUIC_MAX8997) += muic_max8997.o COBJS := $(COBJS-y) diff --git a/drivers/power/power_fsl.c b/drivers/power/power_fsl.c index 0275fd9891a..651f88f850a 100644 --- a/drivers/power/power_fsl.c +++ b/drivers/power/power_fsl.c @@ -27,7 +27,7 @@ #include #include -#if defined(CONFIG_PMIC_SPI) +#if defined(CONFIG_POWER_SPI) static u32 pmic_spi_prepare_tx(u32 reg, u32 *val, u32 write) { return (write << 31) | (reg << 25) | (*val & 0x00FFFFFF); @@ -47,7 +47,7 @@ int pmic_init(unsigned char bus) p->name = name; p->number_of_regs = PMIC_NUM_OF_REGS; -#if defined(CONFIG_PMIC_SPI) +#if defined(CONFIG_POWER_SPI) p->interface = PMIC_SPI; p->bus = CONFIG_FSL_PMIC_BUS; p->hw.spi.cs = CONFIG_FSL_PMIC_CS; @@ -56,13 +56,13 @@ int pmic_init(unsigned char bus) p->hw.spi.bitlen = CONFIG_FSL_PMIC_BITLEN; p->hw.spi.flags = SPI_XFER_BEGIN | SPI_XFER_END; p->hw.spi.prepare_tx = pmic_spi_prepare_tx; -#elif defined(CONFIG_PMIC_I2C) +#elif defined(CONFIG_POWER_I2C) p->interface = PMIC_I2C; p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR; p->hw.i2c.tx_num = 3; p->bus = bus; #else -#error "You must select CONFIG_PMIC_SPI or CONFIG_PMIC_I2C" +#error "You must select CONFIG_POWER_SPI or CONFIG_PMIC_I2C" #endif return 0; diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 6ae764a2d4a..8fc39424507 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -72,9 +72,9 @@ #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) /* PMIC Controller */ -#define CONFIG_PMIC -#define CONFIG_PMIC_SPI -#define CONFIG_PMIC_FSL +#define CONFIG_POWER +#define CONFIG_POWER_SPI +#define CONFIG_POWER_FSL #define CONFIG_FSL_PMIC_BUS 1 #define CONFIG_FSL_PMIC_CS 0 #define CONFIG_FSL_PMIC_CLK 1000000 diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 9d9f4a78229..9e4006b4419 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -68,9 +68,9 @@ #define CONFIG_MXC_GPIO /* PMIC Controller */ -#define CONFIG_PMIC -#define CONFIG_PMIC_SPI -#define CONFIG_PMIC_FSL +#define CONFIG_POWER +#define CONFIG_POWER_SPI +#define CONFIG_POWER_FSL #define CONFIG_FSL_PMIC_BUS 1 #define CONFIG_FSL_PMIC_CS 0 #define CONFIG_FSL_PMIC_CLK 1000000 diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 223b5b0bb92..3b86c9ebf35 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -69,9 +69,9 @@ #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) /* PMIC Controller */ -#define CONFIG_PMIC -#define CONFIG_PMIC_SPI -#define CONFIG_PMIC_FSL +#define CONFIG_POWER +#define CONFIG_POWER_SPI +#define CONFIG_POWER_FSL #define CONFIG_FSL_PMIC_BUS 1 #define CONFIG_FSL_PMIC_CS 2 #define CONFIG_FSL_PMIC_CLK 1000000 diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 826c912494d..342d53fee0b 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -65,9 +65,9 @@ /* * PMIC Configs */ -#define CONFIG_PMIC -#define CONFIG_PMIC_I2C -#define CONFIG_PMIC_FSL +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_FSL #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08 #define CONFIG_RTC_MC13XXX diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h index ffe771f2dcb..3c1c056fe31 100644 --- a/include/configs/mx51_efikamx.h +++ b/include/configs/mx51_efikamx.h @@ -127,9 +127,9 @@ #endif /* SPI PMIC */ -#define CONFIG_PMIC -#define CONFIG_PMIC_SPI -#define CONFIG_PMIC_FSL +#define CONFIG_POWER +#define CONFIG_POWER_SPI +#define CONFIG_POWER_FSL #define CONFIG_FSL_PMIC_BUS 0 #define CONFIG_FSL_PMIC_CS (0 | 120 << 8) #define CONFIG_FSL_PMIC_CLK 25000000 diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 225d359ecb7..f00cec28096 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -69,9 +69,9 @@ #define CONFIG_MXC_SPI /* PMIC Controller */ -#define CONFIG_PMIC -#define CONFIG_PMIC_SPI -#define CONFIG_PMIC_FSL +#define CONFIG_POWER +#define CONFIG_POWER_SPI +#define CONFIG_POWER_FSL #define CONFIG_FSL_PMIC_BUS 0 #define CONFIG_FSL_PMIC_CS 0 #define CONFIG_FSL_PMIC_CLK 2500000 diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index d1f684cbc5c..1916b85e283 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -55,9 +55,9 @@ #define CONFIG_SYS_I2C_SPEED 100000 /* PMIC Configs */ -#define CONFIG_PMIC -#define CONFIG_PMIC_I2C -#define CONFIG_PMIC_FSL +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_FSL #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 8 #define CONFIG_RTC_MC13XXX diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index a1b27cef535..d16de3306a3 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -89,10 +89,10 @@ #define CONFIG_SYS_I2C_SPEED 100000 /* PMIC Controller */ -#define CONFIG_PMIC -#define CONFIG_PMIC_I2C +#define CONFIG_POWER +#define CONFIG_POWER_I2C #define CONFIG_DIALOG_PMIC -#define CONFIG_PMIC_FSL +#define CONFIG_POWER_FSL #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 diff --git a/include/configs/qong.h b/include/configs/qong.h index e43a02110ec..d9bf2010b83 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -58,9 +58,9 @@ #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_RTC_MC13XXX -#define CONFIG_PMIC -#define CONFIG_PMIC_SPI -#define CONFIG_PMIC_FSL +#define CONFIG_POWER +#define CONFIG_POWER_SPI +#define CONFIG_POWER_FSL #define CONFIG_FSL_PMIC_BUS 1 #define CONFIG_FSL_PMIC_CS 0 #define CONFIG_FSL_PMIC_CLK 100000 diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 7e0b3029356..56e83478f8e 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -215,9 +215,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_PMIC -#define CONFIG_PMIC_I2C -#define CONFIG_PMIC_MAX8998 +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_MAX8998 #include /* diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 5fc61364355..894f38bd7db 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -253,9 +253,9 @@ #define CONFIG_I2C_MULTI_BUS #define CONFIG_SYS_MAX_I2C_BUS 7 -#define CONFIG_PMIC -#define CONFIG_PMIC_I2C -#define CONFIG_PMIC_MAX8998 +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_MAX8998 #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_S3C_UDC_OTG diff --git a/include/configs/trats.h b/include/configs/trats.h index 2fdc597c000..355029e8d83 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -234,9 +234,9 @@ #define CONFIG_SOFT_I2C_GPIO_SDA get_multi_sda_pin() #define I2C_INIT multi_i2c_init() -#define CONFIG_PMIC -#define CONFIG_PMIC_I2C -#define CONFIG_PMIC_MAX8997 +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_MAX8997 #define CONFIG_POWER_FG #define CONFIG_POWER_FG_MAX17042 diff --git a/include/configs/tt01.h b/include/configs/tt01.h index f46efa55f16..9f8f240f822 100644 --- a/include/configs/tt01.h +++ b/include/configs/tt01.h @@ -149,9 +149,9 @@ #define CONFIG_MXC_GPIO /* MC13783 connected to CSPI3 and SS0 */ -#define CONFIG_PMIC -#define CONFIG_PMIC_SPI -#define CONFIG_PMIC_FSL +#define CONFIG_POWER +#define CONFIG_POWER_SPI +#define CONFIG_POWER_FSL #define CONFIG_FSL_PMIC_BUS 2 #define CONFIG_FSL_PMIC_CS 0 diff --git a/include/configs/vision2.h b/include/configs/vision2.h index 848df88e7df..a72010ff212 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -87,9 +87,9 @@ #define CONFIG_ENV_IS_IN_SPI_FLASH /* PMIC Controller */ -#define CONFIG_PMIC -#define CONFIG_PMIC_SPI -#define CONFIG_PMIC_FSL +#define CONFIG_POWER +#define CONFIG_POWER_SPI +#define CONFIG_POWER_FSL #define CONFIG_FSL_PMIC_BUS 0 #define CONFIG_FSL_PMIC_CS 0 #define CONFIG_FSL_PMIC_CLK 2500000 -- cgit v1.3.1 From 2988e8662bba5b94c366bc3cb8eb26f0024f74de Mon Sep 17 00:00:00 2001 From: Łukasz Majewski Date: Tue, 13 Nov 2012 03:22:15 +0000 Subject: power:pmic: Rename CONFIG_DIALOG_PMIC defines to CONFIG_DIALOG_POWER Rename CONFIG_DIALOG_PMIC to CONFIG_DIALOG_POWER Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Cc: Stefano Babic --- drivers/power/Makefile | 2 +- include/configs/mx53loco.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 2723724a35f..8c7190156c3 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -32,7 +32,7 @@ COBJS-$(CONFIG_TWL6030_POWER) += twl6030.o COBJS-$(CONFIG_TWL6035_POWER) += twl6035.o COBJS-$(CONFIG_POWER) += power_core.o -COBJS-$(CONFIG_DIALOG_PMIC) += power_dialog.o +COBJS-$(CONFIG_DIALOG_POWER) += power_dialog.o COBJS-$(CONFIG_POWER_FSL) += power_fsl.o COBJS-$(CONFIG_POWER_I2C) += power_i2c.o COBJS-$(CONFIG_POWER_SPI) += power_spi.o diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index d16de3306a3..a1101762e38 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -91,7 +91,7 @@ /* PMIC Controller */ #define CONFIG_POWER #define CONFIG_POWER_I2C -#define CONFIG_DIALOG_PMIC +#define CONFIG_DIALOG_POWER #define CONFIG_POWER_FSL #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 -- cgit v1.3.1 From d858c335bf4f7e9eb0b1dd521a4bd6487a27cd54 Mon Sep 17 00:00:00 2001 From: "Jens Scharsig (BuS Elektronik)" Date: Tue, 30 Oct 2012 00:46:05 +0000 Subject: M68K: eb_cpu5282: general update and enhanced board support - update clock settings for higher perfomance - change standard baud rate to 115200 - fix flash base address - remove unused defines - add I2C support - switch form board dependent flash to cfi - remove board dependent flash code - use sdram bank 0 instead of bank 1 on boot - enable on board frame buffer instead external - remove fake mac address form config - add watchdog support - add status led support Signed-off-by: Jens Scharsig (BuS Elektronik) [agust: fixed small style issues and build warning] Signed-off-by: Anatolij Gustschin --- board/BuS/eb_cpu5282/Makefile | 2 +- board/BuS/eb_cpu5282/cfm_flash.c | 212 ------------------- board/BuS/eb_cpu5282/cfm_flash.h | 40 ---- board/BuS/eb_cpu5282/config.mk | 27 --- board/BuS/eb_cpu5282/eb_cpu5282.c | 110 +++++++--- board/BuS/eb_cpu5282/flash.c | 415 -------------------------------------- boards.cfg | 2 +- include/configs/eb_cpu5282.h | 102 ++++++---- 8 files changed, 146 insertions(+), 764 deletions(-) delete mode 100644 board/BuS/eb_cpu5282/cfm_flash.c delete mode 100644 board/BuS/eb_cpu5282/cfm_flash.h delete mode 100644 board/BuS/eb_cpu5282/config.mk delete mode 100644 board/BuS/eb_cpu5282/flash.c (limited to 'include') diff --git a/board/BuS/eb_cpu5282/Makefile b/board/BuS/eb_cpu5282/Makefile index 0f14699c5e5..ac860c1348f 100644 --- a/board/BuS/eb_cpu5282/Makefile +++ b/board/BuS/eb_cpu5282/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS = $(BOARD).o cfm_flash.o flash.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/BuS/eb_cpu5282/cfm_flash.c b/board/BuS/eb_cpu5282/cfm_flash.c deleted file mode 100644 index fe03b175811..00000000000 --- a/board/BuS/eb_cpu5282/cfm_flash.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * Basic Flash Driver for Freescale MCF 5281/5282 internal FLASH - * - * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include "cfm_flash.h" - -#if defined(CONFIG_M5281) || defined(CONFIG_M5282) - -#if (CONFIG_SYS_CLK>20000000) - #define CFM_CLK (((long) CONFIG_SYS_CLK / (400000 * 8) + 1) | 0x40) -#else - #define CFM_CLK ((long) CONFIG_SYS_CLK / 400000 + 1) -#endif - -#define cmf_backdoor_address(addr) (((addr) & 0x0007FFFF) | 0x04000000 | \ - (CONFIG_SYS_MBAR & 0xC0000000)) - -void cfm_flash_print_info (flash_info_t * info) -{ - printf ("Freescale: "); - switch (info->flash_id & FLASH_TYPEMASK) { - case FREESCALE_ID_MCF5281 & FLASH_TYPEMASK: - printf ("MCF5281 internal FLASH\n"); - break; - case FREESCALE_ID_MCF5282 & FLASH_TYPEMASK: - printf ("MCF5282 internal FLASH\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } -} - -void cfm_flash_init (flash_info_t * info) -{ - int sector; - ulong protection; - MCFCFM_MCR = 0; - MCFCFM_CLKD = CFM_CLK; - debug ("CFM Clock divider: %ld (%d Hz @ %ld Hz)\n",CFM_CLK,\ - CONFIG_SYS_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\ - CONFIG_SYS_CLK); - MCFCFM_SACC = 0; - MCFCFM_DACC = 0; - - if (MCFCFM_SEC & MCFCFM_SEC_KEYEN) - puts("CFM backdoor access is enabled\n"); - if (MCFCFM_SEC & MCFCFM_SEC_SECSTAT) - puts("CFM securety is enabled\n"); - - #ifdef CONFIG_M5281 - info->flash_id = (FREESCALE_MANUFACT & FLASH_VENDMASK) | - (FREESCALE_ID_MCF5281 & FLASH_TYPEMASK); - info->size = 256*1024; - info->sector_count = 16; - #else - info->flash_id = (FREESCALE_MANUFACT & FLASH_VENDMASK) | - (FREESCALE_ID_MCF5282 & FLASH_TYPEMASK); - info->size = 512*1024; - info->sector_count = 32; - #endif - protection = MCFCFM_PROT; - for (sector = 0; sector < info->sector_count; sector++) - { - if (sector == 0) - { - info->start[sector] = CONFIG_SYS_INT_FLASH_BASE; - } - else - { - info->start[sector] = info->start[sector-1] + 0x04000; - } - info->protect[sector] = protection & 1; - protection >>= 1; - } -} - -int cfm_flash_readycheck(int checkblank) -{ - int rc; - unsigned char state; - - rc = ERR_OK; - while (!(MCFCFM_USTAT & MCFCFM_USTAT_CCIF)); - state = MCFCFM_USTAT; - if (state & MCFCFM_USTAT_ACCERR) - { - debug ("%s(): CFM access error",__FUNCTION__); - rc = ERR_PROG_ERROR; - } - if (state & MCFCFM_USTAT_PVIOL) - { - debug ("%s(): CFM protection violation",__FUNCTION__); - rc = ERR_PROTECTED; - } - if (checkblank) - { - if (!(state & MCFCFM_USTAT_BLANK)) - { - debug ("%s(): CFM erras error",__FUNCTION__); - rc = ERR_NOT_ERASED; - } - } - MCFCFM_USTAT = state & 0x34; /* reset state */ - return rc; -} - -/* Erase 16KiB = 8 2KiB pages */ - -int cfm_flash_erase_sector (flash_info_t * info, int sector) -{ - ulong address; - int page; - int rc; - rc= ERR_OK; - address = cmf_backdoor_address(info->start[sector]); - for (page=0; (page<8) && (rc==ERR_OK); page++) - { - *(volatile __u32*) address = 0; - MCFCFM_CMD = MCFCFM_CMD_PGERS; - MCFCFM_USTAT = MCFCFM_USTAT_CBEIF; - rc = cfm_flash_readycheck(0); - if (rc==ERR_OK) - { - *(volatile __u32*) address = 0; - MCFCFM_CMD = MCFCFM_CMD_PGERSVER; - MCFCFM_USTAT = MCFCFM_USTAT_CBEIF; - rc = cfm_flash_readycheck(1); - } - address += 0x800; - } - return rc; -} - -int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - int rc; - ulong dest, data; - - rc = ERR_OK; - if (addr & 3) - { - debug ("Byte and Word alignment not supported\n"); - rc = ERR_ALIGN; - } - if (cnt & 3) - { - debug ("Byte and Word transfer not supported\n"); - rc = ERR_ALIGN; - } - dest = cmf_backdoor_address(addr); - while ((cnt>=4) && (rc == ERR_OK)) - { - data = *((volatile u32 *) src); - *(volatile u32*) dest = data; - MCFCFM_CMD = MCFCFM_CMD_PGM; - MCFCFM_USTAT = MCFCFM_USTAT_CBEIF; - rc = cfm_flash_readycheck(0); - if (*(volatile u32*) addr != data) rc = ERR_PROG_ERROR; - src +=4; - dest +=4; - addr +=4; - cnt -=4; - } - return rc; -} - -#ifdef CONFIG_SYS_FLASH_PROTECTION - -int cfm_flash_protect(flash_info_t * info,long sector,int prot) -{ - int rc; - - rc= ERR_OK; - if (prot) - { - MCFCFM_PROT |= (1<protect[sector]=1; - } - else - { - MCFCFM_PROT &= ~(1<protect[sector]=0; - } - return rc; -} - -#endif - -#endif diff --git a/board/BuS/eb_cpu5282/cfm_flash.h b/board/BuS/eb_cpu5282/cfm_flash.h deleted file mode 100644 index ed4e7943e72..00000000000 --- a/board/BuS/eb_cpu5282/cfm_flash.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Basic Flash Driver for Freescale MCF 5282 internal FLASH - * - * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CFM_FLASH_H_ -#define __CFM_FLASH_H_ - -#define FREESCALE_MANUFACT 0xFACFFACF -#define FREESCALE_ID_MCF5281 0x5281 -#define FREESCALE_ID_MCF5282 0x5282 - -extern void cfm_flash_print_info (flash_info_t * info); -extern int cfm_flash_erase_sector (flash_info_t * info, int sector); -extern void cfm_flash_init (flash_info_t * info); -extern int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt); -#ifdef CONFIG_SYS_FLASH_PROTECTION -extern int cfm_flash_protect(flash_info_t * info,long sector,int prot); -#endif - -#endif diff --git a/board/BuS/eb_cpu5282/config.mk b/board/BuS/eb_cpu5282/config.mk deleted file mode 100644 index 18fb84eb3b5..00000000000 --- a/board/BuS/eb_cpu5282/config.mk +++ /dev/null @@ -1,27 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# Coldfire contribution by Bernhard Kuhn -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -ifndef CONFIG_SYS_TEXT_BASE -CONFIG_SYS_TEXT_BASE = 0xFE000000 -endif diff --git a/board/BuS/eb_cpu5282/eb_cpu5282.c b/board/BuS/eb_cpu5282/eb_cpu5282.c index d64ad1b705c..f73431eff59 100644 --- a/board/BuS/eb_cpu5282/eb_cpu5282.c +++ b/board/BuS/eb_cpu5282/eb_cpu5282.c @@ -35,18 +35,19 @@ DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_VIDEO unsigned long display_width; unsigned long display_height; +#endif /*---------------------------------------------------------------------------*/ int checkboard (void) { - puts ("Board: MCF-EV1 + MCF-EV23 (BuS Elektronik GmbH & Co. KG)\n"); + puts("Board: EB+CPU5282 (BuS Elektronik GmbH & Co. KG)\n"); #if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) - puts (" Boot from Internal FLASH\n"); + puts(" Boot from Internal FLASH\n"); #endif - return 0; } @@ -55,29 +56,39 @@ phys_size_t initdram (int board_type) int size, i; size = 0; - MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6 - | MCFSDRAMC_DCR_RC ((15 * CONFIG_SYS_CLK) >> 4); + MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6 | + MCFSDRAMC_DCR_RC((15 * CONFIG_SYS_CLK / 1000000) >> 4); + asm (" nop"); #ifdef CONFIG_SYS_SDRAM_BASE0 - - MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE (CONFIG_SYS_SDRAM_BASE0) - | MCFSDRAMC_DACR_CASL (1) - | MCFSDRAMC_DACR_CBM (3) - | MCFSDRAMC_DACR_PS_16; + MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE(CONFIG_SYS_SDRAM_BASE0)| + MCFSDRAMC_DACR_CASL(1) | MCFSDRAMC_DACR_CBM(3) | + MCFSDRAMC_DACR_PS_32; + asm (" nop"); MCFSDRAMC_DMR0 = MCFSDRAMC_DMR_BAM_16M | MCFSDRAMC_DMR_V; + asm (" nop"); MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP; + asm (" nop"); + for (i = 0; i < 10; i++) + asm (" nop"); - *(unsigned short *) (CONFIG_SYS_SDRAM_BASE0) = 0xA5A5; + *(unsigned long *)(CONFIG_SYS_SDRAM_BASE0) = 0xA5A5A5A5; + asm (" nop"); MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE; + asm (" nop"); + for (i = 0; i < 2000; i++) asm (" nop"); - mbar_writeLong (MCFSDRAMC_DACR0, - mbar_readLong (MCFSDRAMC_DACR0) | MCFSDRAMC_DACR_IMRS); - *(unsigned int *) (CONFIG_SYS_SDRAM_BASE0 + 0x220) = 0xA5A5; - size += CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; + + MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IMRS; + asm (" nop"); + /* write SDRAM mode register */ + *(unsigned long *)(CONFIG_SYS_SDRAM_BASE0 + 0x80440) = 0xA5A5A5A5; + asm (" nop"); + size += CONFIG_SYS_SDRAM_SIZE0 * 1024 * 1024; #endif -#ifdef CONFIG_SYS_SDRAM_BASE1 +#ifdef CONFIG_SYS_SDRAM_BASE1xx MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE (CONFIG_SYS_SDRAM_BASE1) | MCFSDRAMC_DACR_CASL (1) | MCFSDRAMC_DACR_CBM (3) @@ -134,38 +145,74 @@ int testdram (void) } #endif +#if defined(CONFIG_HW_WATCHDOG) + +void hw_watchdog_init(void) +{ + char *s; + int enable; + + enable = 1; + s = getenv("watchdog"); + if (s != NULL) + if ((strncmp(s, "off", 3) == 0) || (strncmp(s, "0", 1) == 0)) + enable = 0; + if (enable) + MCFGPTA_GPTDDR |= (1<<2); + else + MCFGPTA_GPTDDR &= ~(1<<2); +} + +void hw_watchdog_reset(void) +{ + MCFGPTA_GPTPORT ^= (1<<2); +} +#endif + int misc_init_r(void) { #ifdef CONFIG_HW_WATCHDOG hw_watchdog_init(); -#endif -#ifndef CONFIG_VIDEO - vcxk_init(16, 16); #endif return 1; } -#if defined(CONFIG_VIDEO) +void __led_toggle(led_id_t mask) +{ + MCFGPTA_GPTPORT ^= (1 << 3); +} -/* - ****h* EB+CPU5282-T1/drv_video_init - * FUNCTION - *** - */ +void __led_init(led_id_t mask, int state) +{ + __led_set(mask, state); + MCFGPTA_GPTDDR |= (1 << 3); +} + +void __led_set(led_id_t mask, int state) +{ + if (state == STATUS_LED_ON) + MCFGPTA_GPTPORT |= (1 << 3); + else + MCFGPTA_GPTPORT &= ~(1 << 3); +} + +#if defined(CONFIG_VIDEO) int drv_video_init(void) { char *s; +#ifdef CONFIG_SPLASH_SCREEN unsigned long splash; - +#endif printf("Init Video as "); - - if ((s = getenv("displaywidth")) != NULL) + s = getenv("displaywidth"); + if (s != NULL) display_width = simple_strtoul(s, NULL, 10); else display_width = 256; - if ((s = getenv("displayheight")) != NULL) + s = getenv("displayheight"); + if (s != NULL) display_height = simple_strtoul(s, NULL, 10); else display_height = 256; @@ -178,10 +225,9 @@ int drv_video_init(void) vcxk_init(display_width, display_height); #ifdef CONFIG_SPLASH_SCREEN - if ((s = getenv("splashimage")) != NULL) { - debug("use splashimage: %s\n", s); + s = getenv("splashimage"); + if (s != NULL) { splash = simple_strtoul(s, NULL, 16); - debug("use splashimage: %x\n", splash); vcxk_acknowledge_wait(); video_display_bitmap(splash, 0, 0); } diff --git a/board/BuS/eb_cpu5282/flash.c b/board/BuS/eb_cpu5282/flash.c deleted file mode 100644 index 8b7f9578fc8..00000000000 --- a/board/BuS/eb_cpu5282/flash.c +++ /dev/null @@ -1,415 +0,0 @@ -/* - * (C) Copyright 2005 - * BuS Elektronik GmbH & Co.KG - * - * Based On - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include "cfm_flash.h" - -#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE -#define FLASH_BANK_SIZE 0x200000 - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -void flash_print_info (flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) { - case (AMD_MANUFACT & FLASH_VENDMASK): - printf ("AMD: "); - switch (info->flash_id & FLASH_TYPEMASK) { - case (AMD_ID_LV160B & FLASH_TYPEMASK): - printf ("AM29LV160B (16Bit)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - break; - case FREESCALE_MANUFACT & FLASH_VENDMASK: - cfm_flash_print_info (info); - break; - default: - printf ("Unknown Vendor "); - break; - } - - puts (" Size: "); - if ((info->size >> 20) > 0) - { - printf ("%ld MiB",info->size >> 20); - } - else - { - printf ("%ld KiB",info->size >> 10); - } - printf (" in %d Sectors\n", info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if ((i % 4) == 0) { - printf ("\n "); - } - printf ("%02d: %08lX%s ", i,info->start[i], - info->protect[i] ? " P" : " "); - } - printf ("\n\n"); -} - -unsigned long flash_init (void) -{ - int i, j; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - ulong flashbase = 0; - - switch (i) - { - case 1: - flash_info[i].flash_id = - (AMD_MANUFACT & FLASH_VENDMASK) | - (AMD_ID_LV160B & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - flashbase = PHYS_FLASH_1; - for (j = 0; j < flash_info[i].sector_count; j++) { - if (j == 0) { - /* 1st is 16 KiB */ - flash_info[i].start[j] = flashbase; - } - if ((j >= 1) && (j <= 2)) { - /* 2nd and 3rd are 8 KiB */ - flash_info[i].start[j] = - flashbase + 0x4000 + 0x2000 * (j - 1); - } - if (j == 3) { - /* 4th is 32 KiB */ - flash_info[i].start[j] = flashbase + 0x8000; - } - if ((j >= 4) && (j <= 34)) { - /* rest is 256 KiB */ - flash_info[i].start[j] = - flashbase + 0x10000 + 0x10000 * (j - 4); - } - } - break; - case 0: - cfm_flash_init (&flash_info[i]); - break; - default: - panic ("configured to many flash banks!\n"); - } - - size += flash_info[i].size; - } - - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + 0xffff, &flash_info[0]); - - return size; -} - -#define CMD_READ_ARRAY 0x00F0 -#define CMD_UNLOCK1 0x00AA -#define CMD_UNLOCK2 0x0055 -#define CMD_ERASE_SETUP 0x0080 -#define CMD_ERASE_CONFIRM 0x0030 -#define CMD_PROGRAM 0x00A0 -#define CMD_UNLOCK_BYPASS 0x0020 - -#define MEM_FLASH_ADDR1 (*(volatile u16 *)(info->start[0] + (0x00000555<<1))) -#define MEM_FLASH_ADDR2 (*(volatile u16 *)(info->start[0] + (0x000002AA<<1))) - - -#define BIT_ERASE_DONE 0x0080 -#define BIT_RDY_MASK 0x0080 -#define BIT_PROGRAM_ERROR 0x0020 -#define BIT_TIMEOUT 0x80000000 /* our flag */ - -#define ERR_READY -1 - -int amd_flash_erase_sector(flash_info_t * info, int sector) -{ - int state; - ulong result; - ulong start; - - volatile u16 *addr = - (volatile u16 *) (info->start[sector]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - *addr = CMD_ERASE_CONFIRM; - - /* wait until flash is ready */ - state = 0; - start = get_timer(0); - - do { - result = *addr; - - /* check timeout */ - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - state = ERR_TIMOUT; - } - - if (!state && (result & 0xFFFF) & BIT_ERASE_DONE) - state = ERR_READY; - } - while (!state); - if (state == ERR_READY) - state = ERR_OK; - - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - - return state; -} - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int iflag, cflag; - int sector; - int rc; - - rc = ERR_OK; - - if (info->flash_id == FLASH_UNKNOWN) - { - rc = ERR_UNKNOWN_FLASH_TYPE; - } /* (info->flash_id == FLASH_UNKNOWN) */ - - if ((s_first < 0) || (s_first > s_last) || s_last >= info->sector_count) - { - rc = ERR_INVAL; - } - - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - for (sector = s_first; (sector <= s_last) && (rc == ERR_OK); sector++) { - - if (info->protect[sector]) - { - putc('P'); /* protected sector will not erase */ - } - else - { - /* erase on unprotected sector */ - puts("E\b"); - switch (info->flash_id & FLASH_VENDMASK) - { - case (AMD_MANUFACT & FLASH_VENDMASK): - rc = amd_flash_erase_sector(info,sector); - break; - case (FREESCALE_MANUFACT & FLASH_VENDMASK): - rc = cfm_flash_erase_sector(info,sector); - break; - default: - return ERR_UNKNOWN_FLASH_VENDOR; - } - putc('.'); - } - } - if (rc!=ERR_OK) - { - printf ("\n "); - flash_perror (rc); - } - else - { - printf (" done\n"); - } - - udelay (10000); /* allow flash to settle - wait 10 ms */ - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rc; -} - -volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data) -{ - volatile u16 *addr; - ulong result; - int cflag, iflag; - int state; - ulong start; - - /* - * Check if Flash is (sufficiently) erased - */ - addr = (volatile u16 *) dest; - - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - - cflag = icache_status (); - icache_disable (); - iflag = disable_interrupts (); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait until flash is ready */ - state = 0; - do { - result = *addr; - - /* check timeout */ - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - state = ERR_TIMOUT; - } - if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK))) - state = ERR_READY; - - } while (!state); - - *addr = CMD_READ_ARRAY; - - if (state == ERR_READY) - state = ERR_OK; - if ((*addr != data) && (state != ERR_TIMOUT)) - state = ERR_PROG_ERROR; - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return state; -} - -int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - int rc; - ulong dest; - u16 data; - - rc = ERR_OK; - if (addr & 1) - { - debug ("Byte alignment not supported\n"); - rc = ERR_ALIGN; - } - if (cnt & 1) - { - debug ("Byte transfer not supported\n"); - rc = ERR_ALIGN; - } - - dest = addr; - while ((cnt>=2) && (rc == ERR_OK)) - { - data = *((volatile u16 *) src); - rc=amd_write_word (info,dest,data); - src +=2; - dest +=2; - cnt -=2; - } - return rc; -} - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - int rc; - - switch (info->flash_id & FLASH_VENDMASK) - { - case (AMD_MANUFACT & FLASH_VENDMASK): - rc = amd_flash_write_buff(info,src,addr,cnt); - break; - case (FREESCALE_MANUFACT & FLASH_VENDMASK): - rc = cfm_flash_write_buff(info,src,addr,cnt); - break; - default: - rc = ERR_UNKNOWN_FLASH_VENDOR; - } - return rc; - -} -int amd_flash_protect(flash_info_t * info,long sector,int prot) -{ - int rc; - rc= ERR_OK; - if (prot) - { - info->protect[sector]=1; - } - else - { - info->protect[sector]=0; - } - return rc; -} - -#ifdef CONFIG_SYS_FLASH_PROTECTION - -int flash_real_protect(flash_info_t * info,long sector,int prot) -{ - int rc; - - switch (info->flash_id & FLASH_VENDMASK) - { - case (AMD_MANUFACT & FLASH_VENDMASK): - rc = amd_flash_protect(info,sector,prot); - break; - case (FREESCALE_MANUFACT & FLASH_VENDMASK): - rc = cfm_flash_protect(info,sector,prot); - break; - default: - rc = ERR_UNKNOWN_FLASH_VENDOR; - } - return rc; -} - -#endif diff --git a/boards.cfg b/boards.cfg index 4dd989383c2..7ae663c7d96 100644 --- a/boards.cfg +++ b/boards.cfg @@ -372,7 +372,7 @@ M5235EVB m68k mcf523x m5235evb freesca M5235EVB_Flash32 m68k mcf523x m5235evb freescale - M5235EVB:NORFLASH_PS32BIT,SYS_TEXT_BASE=0xFFC00000 cobra5272 m68k mcf52x2 cobra5272 - idmr m68k mcf52x2 -eb_cpu5282 m68k mcf52x2 eb_cpu5282 BuS - eb_cpu5282:SYS_TEXT_BASE=0xFFE00000 +eb_cpu5282 m68k mcf52x2 eb_cpu5282 BuS - eb_cpu5282:SYS_TEXT_BASE=0xFF000000 eb_cpu5282_internal m68k mcf52x2 eb_cpu5282 BuS - eb_cpu5282:SYS_TEXT_BASE=0xF0000000 TASREG m68k mcf52x2 tasreg esd M5208EVBE m68k mcf52x2 m5208evbe freescale diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 9ecc10bd1b5..5a0d321f739 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -38,7 +38,7 @@ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) -#define CONFIG_BAUDRATE 9600 +#define CONFIG_BAUDRATE 115200 #undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */ @@ -52,20 +52,24 @@ #define CONFIG_RESET_TO_RETRY #define CONFIG_SPLASH_SCREEN +#define CONFIG_HW_WATCHDOG + +#define CONFIG_STATUS_LED +#define CONFIG_BOARD_SPECIFIC_LED +#define STATUS_LED_ACTIVE 0 +#define STATUS_LED_BIT 0x0008 /* Timer7 GPIO */ +#define STATUS_LED_BOOT 0 +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +#define STATUS_LED_STATE STATUS_LED_OFF + /*----------------------------------------------------------------------* * Configuration for environment * * Environment is in the second sector of the first 256k of flash * *----------------------------------------------------------------------*/ -#ifndef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_ENV_ADDR 0xF003C000 /* End of 256K */ -#define CONFIG_ENV_SECT_SIZE 0x4000 -#define CONFIG_ENV_IS_IN_FLASH 1 -#else -#define CONFIG_ENV_ADDR 0xFFE04000 -#define CONFIG_ENV_SECT_SIZE 0x2000 +#define CONFIG_ENV_ADDR 0xFF040000 +#define CONFIG_ENV_SECT_SIZE 0x00020000 #define CONFIG_ENV_IS_IN_FLASH 1 -#endif /* * BOOTP options @@ -78,26 +82,24 @@ /* * Command line configuration. */ +#define CONFIG_CMDLINE_EDITING #include #undef CONFIG_CMD_LOADB +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_LED #define CONFIG_CMD_MII #define CONFIG_CMD_NET #define CONFIG_MCFTMR - #define CONFIG_BOOTDELAY 5 -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_PROMPT "\nEB+CPU5282> " #define CONFIG_SYS_LONGHELP 1 -#if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE @@ -112,12 +114,12 @@ /*----------------------------------------------------------------------* * Clock and PLL Configuration * *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 10000000 -#define CONFIG_SYS_CLK 58982400 /* 9,8304MHz * 6 */ +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_CLK 80000000 /* 8MHz * 8 */ -/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */ +/* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */ -#define CONFIG_SYS_MFD 0x01 /* PLL Multiplication Factor Devider */ +#define CONFIG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */ #define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */ /*----------------------------------------------------------------------* @@ -135,7 +137,6 @@ #define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE #define MCFFEC_TOUT_LOOP 50000 -#define CONFIG_ETHADDR 00:CF:52:82:EB:01 #define CONFIG_OVERWRITE_ETHADDR_ONCE /*------------------------------------------------------------------------- @@ -151,7 +152,7 @@ *-----------------------------------------------------------------------*/ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 #define CONFIG_SYS_GBL_DATA_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET @@ -161,12 +162,11 @@ * (Set up by the startup code) * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CONFIG_SYS_SDRAM_BASE1 0x00000000 -#define CONFIG_SYS_SDRAM_SIZE1 16 /* SDRAM size in MB */ - -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE1 -#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE1 +#define CONFIG_SYS_SDRAM_BASE0 0x00000000 +#define CONFIG_SYS_SDRAM_SIZE0 16 /* SDRAM size in MB */ +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE0 +#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0 /* If M5282 port is fully implemented the monitor base will be behind * the vector table. */ @@ -190,16 +190,24 @@ /*----------------------------------------------------------------------- * FLASH organization */ +#define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE #define CONFIG_SYS_INT_FLASH_BASE 0xF0000000 #define CONFIG_SYS_INT_FLASH_ENABLE 0x21 -#define CONFIG_SYS_MAX_FLASH_SECT 35 -#define CONFIG_SYS_MAX_FLASH_BANKS 2 +#define CONFIG_SYS_MAX_FLASH_SECT 128 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_FLASH_ERASE_TOUT 10000000 #define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_SIZE 16*1024*1024 +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT + +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } + /*----------------------------------------------------------------------- * Cache Configuration */ @@ -221,12 +229,16 @@ * Memory bank definitions */ -#define CONFIG_SYS_CS0_BASE 0xFFE00000 +#define CONFIG_SYS_CS0_BASE 0xFF000000 #define CONFIG_SYS_CS0_CTRL 0x00001980 -#define CONFIG_SYS_CS0_MASK 0x001F0001 +#define CONFIG_SYS_CS0_MASK 0x00FF0001 -#define CONFIG_SYS_CS3_BASE 0xE0000000 -#define CONFIG_SYS_CS0_CTRL 0x00001980 +#define CONFIG_SYS_CS2_BASE 0xE0000000 +#define CONFIG_SYS_CS2_CTRL 0x00001980 +#define CONFIG_SYS_CS2_MASK 0x000F0001 + +#define CONFIG_SYS_CS3_BASE 0xE0100000 +#define CONFIG_SYS_CS3_CTRL 0x00001980 #define CONFIG_SYS_CS3_MASK 0x000F0001 /*----------------------------------------------------------------------- @@ -248,11 +260,30 @@ #define CONFIG_SYS_PCDDR 0x0000000 #define CONFIG_SYS_PCDAT 0x0000000 +#define CONFIG_SYS_PASPAR 0x0F0F #define CONFIG_SYS_PEHLPAR 0xC0 #define CONFIG_SYS_PUAPAR 0x0F #define CONFIG_SYS_DDRUA 0x05 #define CONFIG_SYS_PJPAR 0xFF +/*----------------------------------------------------------------------- + * I2C + */ + +#define CONFIG_HARD_I2C +#define CONFIG_FSL_I2C + +#define CONFIG_SYS_I2C_OFFSET 0x00000300 +#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR + +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 0 + +#ifdef CONFIG_CMD_DATE +#define CONFIG_RTC_DS1338 +#define CONFIG_I2C_RTC_ADDR 0x68 +#endif + /*----------------------------------------------------------------------- * VIDEO configuration */ @@ -260,12 +291,11 @@ #define CONFIG_VIDEO #ifdef CONFIG_VIDEO -#define CONFIG_VIDEO_VCXK 1 +#define CONFIG_VIDEO_VCXK 1 #define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 2 #define CONFIG_SYS_VCXK_DOUBLEBUFFERED 1 -#define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS3_BASE -#define CONFIG_SYS_VCXK_AUTODETECT 1 +#define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS2_BASE #define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT #define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR -- cgit v1.3.1