From c861d21cba44fe068e9a47dfcf57f7e84c54d73e Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 9 Feb 2021 21:42:48 -0500 Subject: arm: Remove ot1200 board This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. In order to convert to using the DWC SATA driver under DM further migrations are required. Cc: Christian Gmeiner Signed-off-by: Tom Rini Acked-by: Christian Gmeiner --- include/configs/ot1200.h | 95 ------------------------------------------------ 1 file changed, 95 deletions(-) delete mode 100644 include/configs/ot1200.h (limited to 'include') diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h deleted file mode 100644 index ea61f92bdbb..00000000000 --- a/include/configs/ot1200.h +++ /dev/null @@ -1,95 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. - * Copyright (C) 2014 Bachmann electronic GmbH - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "mx6_common.h" - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) - -/* UART Configs */ -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* SF Configs */ - -/* IO expander */ -#define CONFIG_PCA953X -#define CONFIG_SYS_I2C_PCA953X_ADDR 0x20 -#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} } - -/* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ -#define CONFIG_SYS_I2C_SPEED 100000 - -/* OCOTP Configs */ -#define CONFIG_IMX_OTP -#define IMX_OTP_BASE OCOTP_BASE_ADDR -#define IMX_OTP_ADDR_MAX 0x7F -#define IMX_OTP_DATA_ERROR_VAL 0xBADABADA -#define IMX_OTPWRITE_ENABLED - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_USDHC_NUM 2 - -/* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 - -/* - * SATA Configs - */ -#ifdef CONFIG_CMD_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 -#define CONFIG_DWC_AHSATA_PORT_ID 0 -#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR -#define CONFIG_LBA48 -#endif - -/* SPL */ -#ifdef CONFIG_SPL -#include "imx6_spl.h" -#endif - -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE MII100 -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 0x5 - -#ifndef CONFIG_SPL -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_BUS 1 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -#endif - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* Environment organization */ -/* M25P16 has an erase size of 64 KiB */ - -#define CONFIG_BOOTP_SERVERIP -#define CONFIG_BOOTP_BOOTFILE - -#endif /* __CONFIG_H */ -- cgit v1.2.3