From 7389776cda77faca282ad2b2f207c04b67a451b3 Mon Sep 17 00:00:00 2001 From: Yannick Fertré Date: Mon, 7 Oct 2019 15:29:03 +0200 Subject: include: Add new DCS commands in the enum list MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adding new DCS commands which are specified in the DCS 1.3 spec related to CABC. Signed-off-by: Yannick Fertré --- include/mipi_display.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include') diff --git a/include/mipi_display.h b/include/mipi_display.h index ddcc8ca7316..19aa65a3554 100644 --- a/include/mipi_display.h +++ b/include/mipi_display.h @@ -115,6 +115,14 @@ enum { MIPI_DCS_READ_MEMORY_CONTINUE = 0x3E, MIPI_DCS_SET_TEAR_SCANLINE = 0x44, MIPI_DCS_GET_SCANLINE = 0x45, + MIPI_DCS_SET_DISPLAY_BRIGHTNESS = 0x51, /* MIPI DCS 1.3 */ + MIPI_DCS_GET_DISPLAY_BRIGHTNESS = 0x52, /* MIPI DCS 1.3 */ + MIPI_DCS_WRITE_CONTROL_DISPLAY = 0x53, /* MIPI DCS 1.3 */ + MIPI_DCS_GET_CONTROL_DISPLAY = 0x54, /* MIPI DCS 1.3 */ + MIPI_DCS_WRITE_POWER_SAVE = 0x55, /* MIPI DCS 1.3 */ + MIPI_DCS_GET_POWER_SAVE = 0x56, /* MIPI DCS 1.3 */ + MIPI_DCS_SET_CABC_MIN_BRIGHTNESS = 0x5E, /* MIPI DCS 1.3 */ + MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F, /* MIPI DCS 1.3 */ MIPI_DCS_READ_DDB_START = 0xA1, MIPI_DCS_READ_DDB_CONTINUE = 0xA8, }; -- cgit v1.3.1 From 66c37246567c04416780f2c2b87aa251470e0585 Mon Sep 17 00:00:00 2001 From: Yannick Fertré Date: Mon, 7 Oct 2019 15:29:04 +0200 Subject: video: add support of MIPI DSI interface MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mipi_display.c contains a set of dsi helpers. This file is a copy of file drm_mipi_dsi.c (linux kernel). Signed-off-by: Yannick Fertré --- drivers/video/Kconfig | 8 + drivers/video/Makefile | 1 + drivers/video/mipi_dsi.c | 828 +++++++++++++++++++++++++++++++++++++++++++++++ include/mipi_dsi.h | 466 ++++++++++++++++++++++++++ 4 files changed, 1303 insertions(+) create mode 100644 drivers/video/mipi_dsi.c create mode 100644 include/mipi_dsi.h (limited to 'include') diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 261fa985171..36f666eed63 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -73,6 +73,14 @@ config VIDEO_ANSI Enable ANSI escape sequence decoding for a more fully functional console. +config VIDEO_MIPI_DSI + bool "Support MIPI DSI interface" + depends on DM_VIDEO + help + Support MIPI DSI interface for driving a MIPI compatible device. + The MIPI Display Serial Interface (MIPI DSI) defines a high-speed + serial interface between a host processor and a display module. + config CONSOLE_NORMAL bool "Support a simple text console" depends on DM_VIDEO diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 349a207035b..7df9b0bd17a 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -53,6 +53,7 @@ obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o obj-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o obj-${CONFIG_VIDEO_MESON} += meson/ +obj-${CONFIG_VIDEO_MIPI_DSI} += mipi_dsi.o obj-$(CONFIG_VIDEO_MVEBU) += mvebu_lcd.o obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o obj-$(CONFIG_VIDEO_MXS) += mxsfb.o videomodes.o diff --git a/drivers/video/mipi_dsi.c b/drivers/video/mipi_dsi.c new file mode 100644 index 00000000000..cdc3ef58ab1 --- /dev/null +++ b/drivers/video/mipi_dsi.c @@ -0,0 +1,828 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MIPI DSI Bus + * + * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd. + * Copyright (C) 2019 STMicroelectronics - All Rights Reserved + * Andrzej Hajda + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * Mipi_dsi.c contains a set of dsi helpers. + * This file is inspired from the drm helper file drivers/gpu/drm/drm_mipi_dsi.c + * (kernel linux). + * + */ + +#include +#include +#include +#include +#include +#include + +/** + * DOC: dsi helpers + * + * These functions contain some common logic and helpers to deal with MIPI DSI + * peripherals. + * + * Helpers are provided for a number of standard MIPI DSI command as well as a + * subset of the MIPI DCS command set. + */ + +/** + * mipi_dsi_attach - attach a DSI device to its DSI host + * @dsi: DSI peripheral + */ +int mipi_dsi_attach(struct mipi_dsi_device *dsi) +{ + const struct mipi_dsi_host_ops *ops = dsi->host->ops; + + if (!ops || !ops->attach) + return -ENOSYS; + + return ops->attach(dsi->host, dsi); +} +EXPORT_SYMBOL(mipi_dsi_attach); + +/** + * mipi_dsi_detach - detach a DSI device from its DSI host + * @dsi: DSI peripheral + */ +int mipi_dsi_detach(struct mipi_dsi_device *dsi) +{ + const struct mipi_dsi_host_ops *ops = dsi->host->ops; + + if (!ops || !ops->detach) + return -ENOSYS; + + return ops->detach(dsi->host, dsi); +} +EXPORT_SYMBOL(mipi_dsi_detach); + +/** + * mipi_dsi_device_transfer - transfer message to a DSI device + * @dsi: DSI peripheral + * @msg: message + */ +static ssize_t mipi_dsi_device_transfer(struct mipi_dsi_device *dsi, + struct mipi_dsi_msg *msg) +{ + const struct mipi_dsi_host_ops *ops = dsi->host->ops; + + if (!ops || !ops->transfer) + return -ENOSYS; + + if (dsi->mode_flags & MIPI_DSI_MODE_LPM) + msg->flags |= MIPI_DSI_MSG_USE_LPM; + + return ops->transfer(dsi->host, msg); +} + +/** + * mipi_dsi_packet_format_is_short - check if a packet is of the short format + * @type: MIPI DSI data type of the packet + * + * Return: true if the packet for the given data type is a short packet, false + * otherwise. + */ +bool mipi_dsi_packet_format_is_short(u8 type) +{ + switch (type) { + case MIPI_DSI_V_SYNC_START: + case MIPI_DSI_V_SYNC_END: + case MIPI_DSI_H_SYNC_START: + case MIPI_DSI_H_SYNC_END: + case MIPI_DSI_END_OF_TRANSMISSION: + case MIPI_DSI_COLOR_MODE_OFF: + case MIPI_DSI_COLOR_MODE_ON: + case MIPI_DSI_SHUTDOWN_PERIPHERAL: + case MIPI_DSI_TURN_ON_PERIPHERAL: + case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM: + case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM: + case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM: + case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM: + case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM: + case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM: + case MIPI_DSI_DCS_SHORT_WRITE: + case MIPI_DSI_DCS_SHORT_WRITE_PARAM: + case MIPI_DSI_DCS_READ: + case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE: + return true; + } + + return false; +} +EXPORT_SYMBOL(mipi_dsi_packet_format_is_short); + +/** + * mipi_dsi_packet_format_is_long - check if a packet is of the long format + * @type: MIPI DSI data type of the packet + * + * Return: true if the packet for the given data type is a long packet, false + * otherwise. + */ +bool mipi_dsi_packet_format_is_long(u8 type) +{ + switch (type) { + case MIPI_DSI_NULL_PACKET: + case MIPI_DSI_BLANKING_PACKET: + case MIPI_DSI_GENERIC_LONG_WRITE: + case MIPI_DSI_DCS_LONG_WRITE: + case MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20: + case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24: + case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16: + case MIPI_DSI_PACKED_PIXEL_STREAM_30: + case MIPI_DSI_PACKED_PIXEL_STREAM_36: + case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12: + case MIPI_DSI_PACKED_PIXEL_STREAM_16: + case MIPI_DSI_PACKED_PIXEL_STREAM_18: + case MIPI_DSI_PIXEL_STREAM_3BYTE_18: + case MIPI_DSI_PACKED_PIXEL_STREAM_24: + return true; + } + + return false; +} +EXPORT_SYMBOL(mipi_dsi_packet_format_is_long); + +/** + * mipi_dsi_create_packet - create a packet from a message according to the + * DSI protocol + * @packet: pointer to a DSI packet structure + * @msg: message to translate into a packet + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_create_packet(struct mipi_dsi_packet *packet, + const struct mipi_dsi_msg *msg) +{ + if (!packet || !msg) + return -EINVAL; + + /* do some minimum sanity checking */ + if (!mipi_dsi_packet_format_is_short(msg->type) && + !mipi_dsi_packet_format_is_long(msg->type)) + return -EINVAL; + + if (msg->channel > 3) + return -EINVAL; + + memset(packet, 0, sizeof(*packet)); + packet->header[0] = ((msg->channel & 0x3) << 6) | (msg->type & 0x3f); + + /* TODO: compute ECC if hardware support is not available */ + + /* + * Long write packets contain the word count in header bytes 1 and 2. + * The payload follows the header and is word count bytes long. + * + * Short write packets encode up to two parameters in header bytes 1 + * and 2. + */ + if (mipi_dsi_packet_format_is_long(msg->type)) { + packet->header[1] = (msg->tx_len >> 0) & 0xff; + packet->header[2] = (msg->tx_len >> 8) & 0xff; + + packet->payload_length = msg->tx_len; + packet->payload = msg->tx_buf; + } else { + const u8 *tx = msg->tx_buf; + + packet->header[1] = (msg->tx_len > 0) ? tx[0] : 0; + packet->header[2] = (msg->tx_len > 1) ? tx[1] : 0; + } + + packet->size = sizeof(packet->header) + packet->payload_length; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_create_packet); + +/** + * mipi_dsi_shutdown_peripheral() - sends a Shutdown Peripheral command + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi) +{ + struct mipi_dsi_msg msg = { + .channel = dsi->channel, + .type = MIPI_DSI_SHUTDOWN_PERIPHERAL, + .tx_buf = (u8 [2]) { 0, 0 }, + .tx_len = 2, + }; + int ret = mipi_dsi_device_transfer(dsi, &msg); + + return (ret < 0) ? ret : 0; +} +EXPORT_SYMBOL(mipi_dsi_shutdown_peripheral); + +/** + * mipi_dsi_turn_on_peripheral() - sends a Turn On Peripheral command + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi) +{ + struct mipi_dsi_msg msg = { + .channel = dsi->channel, + .type = MIPI_DSI_TURN_ON_PERIPHERAL, + .tx_buf = (u8 [2]) { 0, 0 }, + .tx_len = 2, + }; + int ret = mipi_dsi_device_transfer(dsi, &msg); + + return (ret < 0) ? ret : 0; +} +EXPORT_SYMBOL(mipi_dsi_turn_on_peripheral); + +/* + * mipi_dsi_set_maximum_return_packet_size() - specify the maximum size of the + * the payload in a long packet transmitted from the peripheral back to the + * host processor + * @dsi: DSI peripheral device + * @value: the maximum size of the payload + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi, + u16 value) +{ + u8 tx[2] = { value & 0xff, value >> 8 }; + struct mipi_dsi_msg msg = { + .channel = dsi->channel, + .type = MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE, + .tx_len = sizeof(tx), + .tx_buf = tx, + }; + int ret = mipi_dsi_device_transfer(dsi, &msg); + + return (ret < 0) ? ret : 0; +} +EXPORT_SYMBOL(mipi_dsi_set_maximum_return_packet_size); + +/** + * mipi_dsi_generic_write() - transmit data using a generic write packet + * @dsi: DSI peripheral device + * @payload: buffer containing the payload + * @size: size of payload buffer + * + * This function will automatically choose the right data type depending on + * the payload length. + * + * Return: The number of bytes transmitted on success or a negative error code + * on failure. + */ +ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload, + size_t size) +{ + struct mipi_dsi_msg msg = { + .channel = dsi->channel, + .tx_buf = payload, + .tx_len = size + }; + + switch (size) { + case 0: + msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM; + break; + + case 1: + msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM; + break; + + case 2: + msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM; + break; + + default: + msg.type = MIPI_DSI_GENERIC_LONG_WRITE; + break; + } + + return mipi_dsi_device_transfer(dsi, &msg); +} +EXPORT_SYMBOL(mipi_dsi_generic_write); + +/** + * mipi_dsi_generic_read() - receive data using a generic read packet + * @dsi: DSI peripheral device + * @params: buffer containing the request parameters + * @num_params: number of request parameters + * @data: buffer in which to return the received data + * @size: size of receive buffer + * + * This function will automatically choose the right data type depending on + * the number of parameters passed in. + * + * Return: The number of bytes successfully read or a negative error code on + * failure. + */ +ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params, + size_t num_params, void *data, size_t size) +{ + struct mipi_dsi_msg msg = { + .channel = dsi->channel, + .tx_len = num_params, + .tx_buf = params, + .rx_len = size, + .rx_buf = data + }; + + switch (num_params) { + case 0: + msg.type = MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM; + break; + + case 1: + msg.type = MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM; + break; + + case 2: + msg.type = MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM; + break; + + default: + return -EINVAL; + } + + return mipi_dsi_device_transfer(dsi, &msg); +} +EXPORT_SYMBOL(mipi_dsi_generic_read); + +/** + * mipi_dsi_dcs_write_buffer() - transmit a DCS command with payload + * @dsi: DSI peripheral device + * @data: buffer containing data to be transmitted + * @len: size of transmission buffer + * + * This function will automatically choose the right data type depending on + * the command payload length. + * + * Return: The number of bytes successfully transmitted or a negative error + * code on failure. + */ +ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi, + const void *data, size_t len) +{ + struct mipi_dsi_msg msg = { + .channel = dsi->channel, + .tx_buf = data, + .tx_len = len + }; + + switch (len) { + case 0: + return -EINVAL; + + case 1: + msg.type = MIPI_DSI_DCS_SHORT_WRITE; + break; + + case 2: + msg.type = MIPI_DSI_DCS_SHORT_WRITE_PARAM; + break; + + default: + msg.type = MIPI_DSI_DCS_LONG_WRITE; + break; + } + + return mipi_dsi_device_transfer(dsi, &msg); +} +EXPORT_SYMBOL(mipi_dsi_dcs_write_buffer); + +/** + * mipi_dsi_dcs_write() - send DCS write command + * @dsi: DSI peripheral device + * @cmd: DCS command + * @data: buffer containing the command payload + * @len: command payload length + * + * This function will automatically choose the right data type depending on + * the command payload length. + * + * Return: The number of bytes successfully transmitted or a negative error + * code on failure. + */ +ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, + const void *data, size_t len) +{ + ssize_t err; + size_t size; + u8 *tx; + + if (len > 0) { + size = 1 + len; + + tx = kmalloc(size, GFP_KERNEL); + if (!tx) + return -ENOMEM; + + /* concatenate the DCS command byte and the payload */ + tx[0] = cmd; + memcpy(&tx[1], data, len); + } else { + tx = &cmd; + size = 1; + } + + err = mipi_dsi_dcs_write_buffer(dsi, tx, size); + + if (len > 0) + kfree(tx); + + return err; +} +EXPORT_SYMBOL(mipi_dsi_dcs_write); + +/** + * mipi_dsi_dcs_read() - send DCS read request command + * @dsi: DSI peripheral device + * @cmd: DCS command + * @data: buffer in which to receive data + * @len: size of receive buffer + * + * Return: The number of bytes read or a negative error code on failure. + */ +ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data, + size_t len) +{ + struct mipi_dsi_msg msg = { + .channel = dsi->channel, + .type = MIPI_DSI_DCS_READ, + .tx_buf = &cmd, + .tx_len = 1, + .rx_buf = data, + .rx_len = len + }; + + return mipi_dsi_device_transfer(dsi, &msg); +} +EXPORT_SYMBOL(mipi_dsi_dcs_read); + +/** + * mipi_dsi_dcs_nop() - send DCS nop packet + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi) +{ + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_NOP, NULL, 0); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_nop); + +/** + * mipi_dsi_dcs_soft_reset() - perform a software reset of the display module + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi) +{ + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SOFT_RESET, NULL, 0); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_soft_reset); + +/** + * mipi_dsi_dcs_get_power_mode() - query the display module's current power + * mode + * @dsi: DSI peripheral device + * @mode: return location for the current power mode + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode) +{ + ssize_t err; + + err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_POWER_MODE, mode, + sizeof(*mode)); + if (err <= 0) { + if (err == 0) + err = -ENODATA; + + return err; + } + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_get_power_mode); + +/** + * mipi_dsi_dcs_get_pixel_format() - gets the pixel format for the RGB image + * data used by the interface + * @dsi: DSI peripheral device + * @format: return location for the pixel format + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format) +{ + ssize_t err; + + err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_PIXEL_FORMAT, format, + sizeof(*format)); + if (err <= 0) { + if (err == 0) + err = -ENODATA; + + return err; + } + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_get_pixel_format); + +/** + * mipi_dsi_dcs_enter_sleep_mode() - disable all unnecessary blocks inside the + * display module except interface communication + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi) +{ + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_ENTER_SLEEP_MODE, NULL, 0); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_enter_sleep_mode); + +/** + * mipi_dsi_dcs_exit_sleep_mode() - enable all blocks inside the display + * module + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi) +{ + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_exit_sleep_mode); + +/** + * mipi_dsi_dcs_set_display_off() - stop displaying the image data on the + * display device + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi) +{ + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_OFF, NULL, 0); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_display_off); + +/** + * mipi_dsi_dcs_set_display_on() - start displaying the image data on the + * display device + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure + */ +int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi) +{ + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_display_on); + +/** + * mipi_dsi_dcs_set_column_address() - define the column extent of the frame + * memory accessed by the host processor + * @dsi: DSI peripheral device + * @start: first column of frame memory + * @end: last column of frame memory + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start, + u16 end) +{ + u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff }; + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_COLUMN_ADDRESS, payload, + sizeof(payload)); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_column_address); + +/** + * mipi_dsi_dcs_set_page_address() - define the page extent of the frame + * memory accessed by the host processor + * @dsi: DSI peripheral device + * @start: first page of frame memory + * @end: last page of frame memory + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start, + u16 end) +{ + u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff }; + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PAGE_ADDRESS, payload, + sizeof(payload)); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_page_address); + +/** + * mipi_dsi_dcs_set_tear_off() - turn off the display module's Tearing Effect + * output signal on the TE signal line + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure + */ +int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi) +{ + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_OFF, NULL, 0); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_off); + +/** + * mipi_dsi_dcs_set_tear_on() - turn on the display module's Tearing Effect + * output signal on the TE signal line. + * @dsi: DSI peripheral device + * @mode: the Tearing Effect Output Line mode + * + * Return: 0 on success or a negative error code on failure + */ +int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi, + enum mipi_dsi_dcs_tear_mode mode) +{ + u8 value = mode; + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_ON, &value, + sizeof(value)); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_on); + +/** + * mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image + * data used by the interface + * @dsi: DSI peripheral device + * @format: pixel format + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format) +{ + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PIXEL_FORMAT, &format, + sizeof(format)); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_pixel_format); + +/** + * mipi_dsi_dcs_set_tear_scanline() - set the scanline to use as trigger for + * the Tearing Effect output signal of the display module + * @dsi: DSI peripheral device + * @scanline: scanline to use as trigger + * + * Return: 0 on success or a negative error code on failure + */ +int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline) +{ + u8 payload[3] = { MIPI_DCS_SET_TEAR_SCANLINE, scanline >> 8, + scanline & 0xff }; + ssize_t err; + + err = mipi_dsi_generic_write(dsi, payload, sizeof(payload)); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_scanline); + +/** + * mipi_dsi_dcs_set_display_brightness() - sets the brightness value of the + * display + * @dsi: DSI peripheral device + * @brightness: brightness value + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi, + u16 brightness) +{ + u8 payload[2] = { brightness & 0xff, brightness >> 8 }; + ssize_t err; + + err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, + payload, sizeof(payload)); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_set_display_brightness); + +/** + * mipi_dsi_dcs_get_display_brightness() - gets the current brightness value + * of the display + * @dsi: DSI peripheral device + * @brightness: brightness value + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi, + u16 *brightness) +{ + ssize_t err; + + err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_DISPLAY_BRIGHTNESS, + brightness, sizeof(*brightness)); + if (err <= 0) { + if (err == 0) + err = -ENODATA; + + return err; + } + + return 0; +} +EXPORT_SYMBOL(mipi_dsi_dcs_get_display_brightness); diff --git a/include/mipi_dsi.h b/include/mipi_dsi.h new file mode 100644 index 00000000000..f4a63b47f33 --- /dev/null +++ b/include/mipi_dsi.h @@ -0,0 +1,466 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * MIPI DSI Bus + * + * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd. + * Copyright (C) 2018 STMicroelectronics - All Rights Reserved + * Author(s): Andrzej Hajda + * Yannick Fertre + * Philippe Cornu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef MIPI_DSI_H +#define MIPI_DSI_H + +#include + +struct mipi_dsi_host; +struct mipi_dsi_device; + +/* request ACK from peripheral */ +#define MIPI_DSI_MSG_REQ_ACK BIT(0) +/* use Low Power Mode to transmit message */ +#define MIPI_DSI_MSG_USE_LPM BIT(1) + +/** + * struct mipi_dsi_msg - read/write DSI buffer + * @channel: virtual channel id + * @type: payload data type + * @flags: flags controlling this message transmission + * @tx_len: length of @tx_buf + * @tx_buf: data to be written + * @rx_len: length of @rx_buf + * @rx_buf: data to be read, or NULL + */ +struct mipi_dsi_msg { + u8 channel; + u8 type; + u16 flags; + + size_t tx_len; + const void *tx_buf; + + size_t rx_len; + void *rx_buf; +}; + +bool mipi_dsi_packet_format_is_short(u8 type); +bool mipi_dsi_packet_format_is_long(u8 type); + +/** + * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format + * @size: size (in bytes) of the packet + * @header: the four bytes that make up the header (Data ID, Word Count or + * Packet Data, and ECC) + * @payload_length: number of bytes in the payload + * @payload: a pointer to a buffer containing the payload, if any + */ +struct mipi_dsi_packet { + size_t size; + u8 header[4]; + size_t payload_length; + const u8 *payload; +}; + +int mipi_dsi_create_packet(struct mipi_dsi_packet *packet, + const struct mipi_dsi_msg *msg); + +/** + * struct mipi_dsi_host_ops - DSI bus operations + * @attach: attach DSI device to DSI host + * @detach: detach DSI device from DSI host + * @transfer: transmit a DSI packet + * + * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg + * structures. This structure contains information about the type of packet + * being transmitted as well as the transmit and receive buffers. When an + * error is encountered during transmission, this function will return a + * negative error code. On success it shall return the number of bytes + * transmitted for write packets or the number of bytes received for read + * packets. + * + * Note that typically DSI packet transmission is atomic, so the .transfer() + * function will seldomly return anything other than the number of bytes + * contained in the transmit buffer on success. + */ +struct mipi_dsi_host_ops { + int (*attach)(struct mipi_dsi_host *host, + struct mipi_dsi_device *dsi); + int (*detach)(struct mipi_dsi_host *host, + struct mipi_dsi_device *dsi); + ssize_t (*transfer)(struct mipi_dsi_host *host, + const struct mipi_dsi_msg *msg); +}; + +/** + * struct mipi_dsi_phy_ops - DSI host physical operations + * @init: initialized host physical part + * @get_lane_mbps: get lane bitrate per lane (mbps) + * @post_set_mode: operation that should after set mode + */ +struct mipi_dsi_phy_ops { + int (*init)(void *priv_data); + int (*get_lane_mbps)(void *priv_data, struct display_timing *timings, + u32 lanes, u32 format, unsigned int *lane_mbps); + void (*post_set_mode)(void *priv_data, unsigned long mode_flags); +}; + +/** + * struct mipi_dsi_host - DSI host device + * @dev: driver model device node for this DSI host + * @ops: DSI host operations + * @list: list management + */ +struct mipi_dsi_host { + struct device *dev; + const struct mipi_dsi_host_ops *ops; + struct list_head list; +}; + +/* DSI mode flags */ + +/* video mode */ +#define MIPI_DSI_MODE_VIDEO BIT(0) +/* video burst mode */ +#define MIPI_DSI_MODE_VIDEO_BURST BIT(1) +/* video pulse mode */ +#define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2) +/* enable auto vertical count mode */ +#define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3) +/* enable hsync-end packets in vsync-pulse and v-porch area */ +#define MIPI_DSI_MODE_VIDEO_HSE BIT(4) +/* disable hfront-porch area */ +#define MIPI_DSI_MODE_VIDEO_HFP BIT(5) +/* disable hback-porch area */ +#define MIPI_DSI_MODE_VIDEO_HBP BIT(6) +/* disable hsync-active area */ +#define MIPI_DSI_MODE_VIDEO_HSA BIT(7) +/* flush display FIFO on vsync pulse */ +#define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8) +/* disable EoT packets in HS mode */ +#define MIPI_DSI_MODE_EOT_PACKET BIT(9) +/* device supports non-continuous clock behavior (DSI spec 5.6.1) */ +#define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10) +/* transmit data in low power */ +#define MIPI_DSI_MODE_LPM BIT(11) + +enum mipi_dsi_pixel_format { + MIPI_DSI_FMT_RGB888, + MIPI_DSI_FMT_RGB666, + MIPI_DSI_FMT_RGB666_PACKED, + MIPI_DSI_FMT_RGB565, +}; + +#define DSI_DEV_NAME_SIZE 20 + +/** + * struct mipi_dsi_device_info - template for creating a mipi_dsi_device + * @type: DSI peripheral chip type + * @channel: DSI virtual channel assigned to peripheral + * @node: pointer to OF device node or NULL + * + * This is populated and passed to mipi_dsi_device_new to create a new + * DSI device + */ +struct mipi_dsi_device_info { + char type[DSI_DEV_NAME_SIZE]; + u32 channel; + struct device_node *node; +}; + +/** + * struct mipi_dsi_device - DSI peripheral device + * @host: DSI host for this peripheral + * @dev: driver model device node for this peripheral + * @name: DSI peripheral chip type + * @channel: virtual channel assigned to the peripheral + * @format: pixel format for video mode + * @lanes: number of active data lanes + * @mode_flags: DSI operation mode related flags + */ +struct mipi_dsi_device { + struct mipi_dsi_host *host; + struct udevice *dev; + + char name[DSI_DEV_NAME_SIZE]; + unsigned int channel; + unsigned int lanes; + enum mipi_dsi_pixel_format format; + unsigned long mode_flags; +}; + +/** + * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any + * given pixel format defined by the MIPI DSI + * specification + * @fmt: MIPI DSI pixel format + * + * Returns: The number of bits per pixel of the given pixel format. + */ +static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt) +{ + switch (fmt) { + case MIPI_DSI_FMT_RGB888: + case MIPI_DSI_FMT_RGB666: + return 24; + + case MIPI_DSI_FMT_RGB666_PACKED: + return 18; + + case MIPI_DSI_FMT_RGB565: + return 16; + } + + return -EINVAL; +} + +/** + * struct mipi_dsi_panel_plat - DSI panel platform data + * @device: DSI peripheral device + */ +struct mipi_dsi_panel_plat { + struct mipi_dsi_device *device; +}; + +/** + * mipi_dsi_attach - attach a DSI device to its DSI host + * @dsi: DSI peripheral + */ +int mipi_dsi_attach(struct mipi_dsi_device *dsi); + +/** + * mipi_dsi_detach - detach a DSI device from its DSI host + * @dsi: DSI peripheral + */ +int mipi_dsi_detach(struct mipi_dsi_device *dsi); +int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi); +int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi); +int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi, + u16 value); + +ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload, + size_t size); +ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params, + size_t num_params, void *data, size_t size); + +/** + * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode + * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking + * information only + * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both + * V-Blanking and H-Blanking information + */ +enum mipi_dsi_dcs_tear_mode { + MIPI_DSI_DCS_TEAR_MODE_VBLANK, + MIPI_DSI_DCS_TEAR_MODE_VHBLANK, +}; + +#define MIPI_DSI_DCS_POWER_MODE_DISPLAY BIT(2) +#define MIPI_DSI_DCS_POWER_MODE_NORMAL BIT(3) +#define MIPI_DSI_DCS_POWER_MODE_SLEEP BIT(4) +#define MIPI_DSI_DCS_POWER_MODE_PARTIAL BIT(5) +#define MIPI_DSI_DCS_POWER_MODE_IDLE BIT(6) + +/** + * mipi_dsi_dcs_write_buffer() - transmit a DCS command with payload + * @dsi: DSI peripheral device + * @data: buffer containing data to be transmitted + * @len: size of transmission buffer + * + * This function will automatically choose the right data type depending on + * the command payload length. + * + * Return: The number of bytes successfully transmitted or a negative error + * code on failure. + */ +ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi, + const void *data, size_t len); + +/** + * mipi_dsi_dcs_write() - send DCS write command + * @dsi: DSI peripheral device + * @cmd: DCS command + * @data: buffer containing the command payload + * @len: command payload length + * + * This function will automatically choose the right data type depending on + * the command payload length. + + * code on failure. + */ +ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, + const void *data, size_t len); + +/** + * mipi_dsi_dcs_read() - send DCS read request command + * @dsi: DSI peripheral device + * @cmd: DCS command + * @data: buffer in which to receive data + * @len: size of receive buffer + * + * Return: The number of bytes read or a negative error code on failure. + */ +ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data, + size_t len); + +/** + * mipi_dsi_dcs_nop() - send DCS nop packet + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi); + +/** + * mipi_dsi_dcs_soft_reset() - perform a software reset of the display module + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi); + +/** + * mipi_dsi_dcs_get_power_mode() - query the display module's current power + * mode + * @dsi: DSI peripheral device + * @mode: return location for the current power mode + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode); + +/** + * mipi_dsi_dcs_get_pixel_format() - gets the pixel format for the RGB image + * data used by the interface + * @dsi: DSI peripheral device + * @format: return location for the pixel format + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format); + +/** + * mipi_dsi_dcs_enter_sleep_mode() - disable all unnecessary blocks inside the + * display module except interface communication + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi); + +/** + * mipi_dsi_dcs_exit_sleep_mode() - enable all blocks inside the display + * module + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi); + +/** + * mipi_dsi_dcs_set_display_off() - stop displaying the image data on the + * display device + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi); + +/** + * mipi_dsi_dcs_set_display_on() - start displaying the image data on the + * display device + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure + */ +int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi); + +/** + * mipi_dsi_dcs_set_column_address() - define the column extent of the frame + * memory accessed by the host processor + * @dsi: DSI peripheral device + * @start: first column of frame memory + * @end: last column of frame memory + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start, + u16 end); +/** + * mipi_dsi_dcs_set_page_address() - define the page extent of the frame + * memory accessed by the host processor + * @dsi: DSI peripheral device + * @start: first page of frame memory + * @end: last page of frame memory + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start, + u16 end); + +/** + * mipi_dsi_dcs_set_tear_off() - turn off the display module's Tearing Effect + * output signal on the TE signal line + * @dsi: DSI peripheral device + * + * Return: 0 on success or a negative error code on failure + */ +int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi); + +/** + * mipi_dsi_dcs_set_tear_on() - turn on the display module's Tearing Effect + * output signal on the TE signal line. + * @dsi: DSI peripheral device + * @mode: the Tearing Effect Output Line mode + * + * Return: 0 on success or a negative error code on failure + */ +int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi, + enum mipi_dsi_dcs_tear_mode mode); + +/** + * mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image + * data used by the interface + * @dsi: DSI peripheral device + * @format: pixel format + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format); + +/** + * mipi_dsi_dcs_set_tear_scanline() - set the scanline to use as trigger for + * the Tearing Effect output signal of the display module + * @dsi: DSI peripheral device + * @scanline: scanline to use as trigger + * + * Return: 0 on success or a negative error code on failure + */ +int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline); + +/** + * mipi_dsi_dcs_set_display_brightness() - sets the brightness value of the + * display + * @dsi: DSI peripheral device + * @brightness: brightness value + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi, + u16 brightness); + +/** + * mipi_dsi_dcs_get_display_brightness() - gets the current brightness value + * of the display + * @dsi: DSI peripheral device + * @brightness: brightness value + * + * Return: 0 on success or a negative error code on failure. + */ +int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi, + u16 *brightness); + +#endif /* MIPI_DSI_H */ -- cgit v1.3.1 From 23f965a4c611e5c2d2576b5f8d2aa2ea6fffb24c Mon Sep 17 00:00:00 2001 From: Yannick Fertré Date: Mon, 7 Oct 2019 15:29:05 +0200 Subject: dm: Add a dsi host uclass MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Display Serial Interface (DSI) host can usefully be modelled as their own uclass. DSI defines a serial bus and a communication protocol between the host and the device (panel, bridge). Signed-off-by: Yannick Fertré --- arch/sandbox/dts/sandbox.dts | 6 ++- arch/sandbox/dts/test.dts | 4 ++ configs/sandbox_defconfig | 1 + drivers/video/Kconfig | 11 +++++ drivers/video/Makefile | 2 + drivers/video/dsi-host-uclass.c | 39 +++++++++++++++++ drivers/video/sandbox_dsi_host.c | 90 ++++++++++++++++++++++++++++++++++++++++ include/dm/uclass-id.h | 1 + include/dsi_host.h | 73 ++++++++++++++++++++++++++++++++ test/dm/Makefile | 1 + test/dm/dsi_host.c | 58 ++++++++++++++++++++++++++ 11 files changed, 285 insertions(+), 1 deletion(-) create mode 100644 drivers/video/dsi-host-uclass.c create mode 100644 drivers/video/sandbox_dsi_host.c create mode 100644 include/dsi_host.h create mode 100644 test/dm/dsi_host.c (limited to 'include') diff --git a/arch/sandbox/dts/sandbox.dts b/arch/sandbox/dts/sandbox.dts index 16a33db87d3..f1637c80f64 100644 --- a/arch/sandbox/dts/sandbox.dts +++ b/arch/sandbox/dts/sandbox.dts @@ -25,6 +25,11 @@ compatible = "google,cros-ec-sandbox"; }; + dsi_host: dsi_host { + compatible = "sandbox,dsi-host"; + status = "okay"; + }; + ethrawbus { compatible = "sandbox,eth-raw-bus"; skip-localhost = <0>; @@ -63,7 +68,6 @@ compatible = "sandbox,spi"; cs-gpios = <0>, <&gpio_a 0>; }; - }; #include "sandbox.dtsi" diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index 25cac056bbd..5d9ab3724ff 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -76,6 +76,10 @@ }; }; + dsi_host: dsi_host { + compatible = "sandbox,dsi-host"; + }; + a-test { reg = <0 1>; compatible = "denx,u-boot-fdt-test"; diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index f77b9e8a7d1..3f2dc992775 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -206,6 +206,7 @@ CONFIG_CONSOLE_ROTATION=y CONFIG_CONSOLE_TRUETYPE=y CONFIG_CONSOLE_TRUETYPE_CANTORAONE=y CONFIG_VIDEO_SANDBOX_SDL=y +CONFIG_VIDEO_DSI_HOST_SANDBOX=y CONFIG_OSD=y CONFIG_SANDBOX_OSD=y CONFIG_W1=y diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 36f666eed63..cdaf616f72f 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -686,6 +686,17 @@ config VIDEO_DW_HDMI rather requires a SoC-specific glue driver to call it), it can not be enabled from the configuration menu. +config VIDEO_DSI_HOST_SANDBOX + bool "Enable sandbox for dsi host" + depends on SANDBOX + select VIDEO_MIPI_DSI + help + Enable support for sandbox dsi host device used for testing + purposes. + Display Serial Interface (DSI) defines a serial bus and + a communication protocol between the host and the device + (panel, bridge). + config VIDEO_SIMPLE bool "Simple display driver for preconfigured display" help diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 7df9b0bd17a..07aaca96ef1 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_CONSOLE_ROTATION) += console_rotate.o obj-$(CONFIG_CONSOLE_TRUETYPE) += console_truetype.o fonts/ obj-$(CONFIG_DISPLAY) += display-uclass.o obj-$(CONFIG_DM_VIDEO) += backlight-uclass.o +obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi-host-uclass.o obj-$(CONFIG_DM_VIDEO) += panel-uclass.o simple_panel.o obj-$(CONFIG_DM_VIDEO) += video-uclass.o vidconsole-uclass.o obj-$(CONFIG_DM_VIDEO) += video_bmp.o @@ -58,6 +59,7 @@ obj-$(CONFIG_VIDEO_MVEBU) += mvebu_lcd.o obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o obj-$(CONFIG_VIDEO_MXS) += mxsfb.o videomodes.o obj-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o +obj-$(CONFIG_VIDEO_DSI_HOST_SANDBOX) += sandbox_dsi_host.o obj-$(CONFIG_VIDEO_SANDBOX_SDL) += sandbox_sdl.o obj-$(CONFIG_VIDEO_SIMPLE) += simplefb.o obj-$(CONFIG_VIDEO_TEGRA20) += tegra.o diff --git a/drivers/video/dsi-host-uclass.c b/drivers/video/dsi-host-uclass.c new file mode 100644 index 00000000000..1db1f88a179 --- /dev/null +++ b/drivers/video/dsi-host-uclass.c @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 STMicroelectronics - All Rights Reserved + * Author(s): Yannick Fertre for STMicroelectronics. + * + */ + +#include +#include +#include + +int dsi_host_init(struct udevice *dev, + struct mipi_dsi_device *device, + struct display_timing *timings, + unsigned int max_data_lanes, + const struct mipi_dsi_phy_ops *phy_ops) +{ + struct dsi_host_ops *ops = dsi_host_get_ops(dev); + + if (!ops->init) + return -ENOSYS; + + return ops->init(dev, device, timings, max_data_lanes, phy_ops); +} + +int dsi_host_enable(struct udevice *dev) +{ + struct dsi_host_ops *ops = dsi_host_get_ops(dev); + + if (!ops->enable) + return -ENOSYS; + + return ops->enable(dev); +} + +UCLASS_DRIVER(dsi_host) = { + .id = UCLASS_DSI_HOST, + .name = "dsi_host", +}; diff --git a/drivers/video/sandbox_dsi_host.c b/drivers/video/sandbox_dsi_host.c new file mode 100644 index 00000000000..cd644ec0b46 --- /dev/null +++ b/drivers/video/sandbox_dsi_host.c @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2019, STMicroelectronics - All Rights Reserved + */ + +#include +#include +#include +#include + +/** + * struct sandbox_dsi_host_priv - private data for driver + * @device: DSI peripheral device + * @timing: Display timings + * @max_data_lanes: maximum number of data lines + * @phy_ops: set of function pointers for performing physical operations + */ +struct sandbox_dsi_host_priv { + struct mipi_dsi_device *device; + struct display_timing *timings; + unsigned int max_data_lanes; + const struct mipi_dsi_phy_ops *phy_ops; +}; + +static int sandbox_dsi_host_init(struct udevice *dev, + struct mipi_dsi_device *device, + struct display_timing *timings, + unsigned int max_data_lanes, + const struct mipi_dsi_phy_ops *phy_ops) +{ + struct sandbox_dsi_host_priv *priv = dev_get_priv(dev); + + if (!device) + return -1; + + if (!timings) + return -2; + + if (max_data_lanes == 0) + return -3; + + if (!phy_ops) + return -4; + + if (!phy_ops->init || !phy_ops->get_lane_mbps || + !phy_ops->post_set_mode) + return -5; + + priv->max_data_lanes = max_data_lanes; + priv->phy_ops = phy_ops; + priv->timings = timings; + priv->device = device; + + return 0; +} + +static int sandbox_dsi_host_enable(struct udevice *dev) +{ + struct sandbox_dsi_host_priv *priv = dev_get_priv(dev); + unsigned int lane_mbps; + int ret; + + priv->phy_ops->init(priv->device); + ret = priv->phy_ops->get_lane_mbps(priv->device, priv->timings, 2, + MIPI_DSI_FMT_RGB888, &lane_mbps); + if (ret) + return -1; + + priv->phy_ops->post_set_mode(priv->device, MIPI_DSI_MODE_VIDEO); + + return 0; +} + +struct dsi_host_ops sandbox_dsi_host_ops = { + .init = sandbox_dsi_host_init, + .enable = sandbox_dsi_host_enable, +}; + +static const struct udevice_id sandbox_dsi_host_ids[] = { + { .compatible = "sandbox,dsi-host"}, + { } +}; + +U_BOOT_DRIVER(sandbox_dsi_host) = { + .name = "sandbox-dsi-host", + .id = UCLASS_DSI_HOST, + .of_match = sandbox_dsi_host_ids, + .ops = &sandbox_dsi_host_ops, + .priv_auto_alloc_size = sizeof(struct sandbox_dsi_host_priv), +}; diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index f431f3bf294..f7f323752c2 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -40,6 +40,7 @@ enum uclass_id { UCLASS_CPU, /* CPU, typically part of an SoC */ UCLASS_CROS_EC, /* Chrome OS EC */ UCLASS_DISPLAY, /* Display (e.g. DisplayPort, HDMI) */ + UCLASS_DSI_HOST, /* Display Serial Interface host */ UCLASS_DMA, /* Direct Memory Access */ UCLASS_EFI, /* EFI managed devices */ UCLASS_ETH, /* Ethernet device */ diff --git a/include/dsi_host.h b/include/dsi_host.h new file mode 100644 index 00000000000..9dfc7b36872 --- /dev/null +++ b/include/dsi_host.h @@ -0,0 +1,73 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2019 STMicroelectronics - All Rights Reserved + * Author(s): Yannick Fertre for STMicroelectronics. + * + */ + +#ifndef _DSI_HOST_H +#define _DSI_HOST_H + +#include + +struct dsi_host_ops { + /** + * init() - initialized the dsi_host + * + * @dev: dsi host device + * @device: DSI peripheral device + * @timing: Display timings + * @max_data_lanes: maximum number of data lines + * @phy_ops: set of function pointers for performing physical operations + * @return 0 if OK, -ve on error + */ + int (*init)(struct udevice *dev, + struct mipi_dsi_device *device, + struct display_timing *timings, + unsigned int max_data_lanes, + const struct mipi_dsi_phy_ops *phy_ops); + + /** + * enable() - Enable the dsi_host + * + * @dev: dsi host device + * @return 0 if OK, -ve on error + */ + int (*enable)(struct udevice *dev); + + /** + * disable() - Disable the dsi_host + * + * @dev: dsi host device + * @return 0 if OK, -ve on error + */ + int (*disable)(struct udevice *dev); +}; + +#define dsi_host_get_ops(dev) ((struct dsi_host_ops *)(dev)->driver->ops) + +/** + * dsi_host_init + * + * @dev: dsi host device + * @device: DSI peripheral device + * @timing: Display timings + * @max_data_lanes: maximum number of data lines + * @phy_ops: set of function pointers for performing physical operations + * @return 0 if OK, -ve on error + */ +int dsi_host_init(struct udevice *dev, + struct mipi_dsi_device *device, + struct display_timing *timings, + unsigned int max_data_lanes, + const struct mipi_dsi_phy_ops *phy_ops); + +/** + * dsi_host_enable + * + * @dev: dsi host device + * @return 0 if OK, -ve on error + */ +int dsi_host_enable(struct udevice *dev); + +#endif diff --git a/test/dm/Makefile b/test/dm/Makefile index 55a7940053e..0c2fd5cb5e2 100644 --- a/test/dm/Makefile +++ b/test/dm/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_BLK) += blk.o obj-$(CONFIG_BOARD) += board.o obj-$(CONFIG_DM_BOOTCOUNT) += bootcount.o obj-$(CONFIG_CLK) += clk.o clk_ccf.o +obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi_host.o obj-$(CONFIG_DM_ETH) += eth.o obj-$(CONFIG_FIRMWARE) += firmware.o obj-$(CONFIG_DM_GPIO) += gpio.o diff --git a/test/dm/dsi_host.c b/test/dm/dsi_host.c new file mode 100644 index 00000000000..59fcd5558f0 --- /dev/null +++ b/test/dm/dsi_host.c @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2019 STMicroelectronics - All Rights Reserved + * Author(s): Yannick Fertre for STMicroelectronics. + */ + +#include +#include +#include +#include +#include +#include +#include + +static int dm_test_dsi_host_phy_init(void *priv_data) +{ + return 0; +} + +static void dm_test_dsi_host_phy_post_set_mode(void *priv_data, + unsigned long mode_flags) +{ +} + +static int dm_test_dsi_host_phy_get_lane_mbps(void *priv_data, + struct display_timing *timings, + u32 lanes, + u32 format, + unsigned int *lane_mbps) +{ + return 0; +} + +static const struct mipi_dsi_phy_ops dm_test_dsi_host_phy_ops = { + .init = dm_test_dsi_host_phy_init, + .get_lane_mbps = dm_test_dsi_host_phy_get_lane_mbps, + .post_set_mode = dm_test_dsi_host_phy_post_set_mode, +}; + +/* Test that dsi_host driver functions are called */ +static int dm_test_dsi_host(struct unit_test_state *uts) +{ + struct udevice *dev; + struct mipi_dsi_device device; + struct display_timing timings; + unsigned int max_data_lanes = 4; + + ut_assertok(uclass_first_device_err(UCLASS_DSI_HOST, &dev)); + + ut_assertok(dsi_host_init(dev, &device, &timings, max_data_lanes, + &dm_test_dsi_host_phy_ops)); + + ut_assertok(dsi_host_enable(dev)); + + return 0; +} + +DM_TEST(dm_test_dsi_host, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); -- cgit v1.3.1 From a6bbc62cab3ab1230d7d07dd80f69b472286f970 Mon Sep 17 00:00:00 2001 From: Yannick Fertré Date: Mon, 7 Oct 2019 15:29:14 +0200 Subject: stm32mp1: configs: update video MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Update video configs to support bitmap 16bpp, 24bpp, 32bpp & RLE8. Signed-off-by: Yannick Fertré --- include/configs/stm32mp1.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h index 92660fe2a00..988992b336e 100644 --- a/include/configs/stm32mp1.h +++ b/include/configs/stm32mp1.h @@ -83,6 +83,13 @@ #define CONFIG_SYS_MTDPARTS_RUNTIME #endif +#ifdef CONFIG_DM_VIDEO +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_BMP_16BPP +#define CONFIG_BMP_24BPP +#define CONFIG_BMP_32BPP +#endif + /*****************************************************************************/ #ifdef CONFIG_DISTRO_DEFAULTS /*****************************************************************************/ -- cgit v1.3.1