From 3ca49c425f523d41bcec8a0eac24cce2d6a0da98 Mon Sep 17 00:00:00 2001 From: Po Liu Date: Wed, 26 Nov 2014 09:38:48 +0800 Subject: powerpc/c29xpcie: Add secure boot support Add NOR and SPI flash secure boot target for C29XPCIE board. Signed-off-by: Po Liu Signed-off-by: Mingkai.Hu Reviewed-by: York Sun --- include/configs/C29XPCIE.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index ecb3d7b25fd..e24b9233687 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -581,4 +581,6 @@ #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND +#include + #endif /* __CONFIG_H */ -- cgit v1.3.1 From 37811ec2265bc56965ca0c1d9eb2ffa81aa8d9e9 Mon Sep 17 00:00:00 2001 From: harninder rai Date: Mon, 15 Dec 2014 12:58:45 +0530 Subject: powerpc/913x: Add config flag for bootdelay CONFIG_BOOTDELAY is missing from board header file. Add this macro to enable counting down of auto boot. Signed-off-by: Harninder Rai [York Sun: Add commit message] Reviewed-by: York Sun --- include/configs/BSC9131RDB.h | 1 + include/configs/BSC9132QDS.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include') diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index eeb0671ddb3..6aaaaa43f0f 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -433,6 +433,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ #define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 10 /* -1 disable auto-boot */ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index e8a8d299cd9..59a8d1b5d17 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -675,6 +675,7 @@ combinations. this should be removed later #define CONFIG_UBOOTPATH "u-boot.bin" #define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 10 /* -1 disable auto-boot */ #ifdef CONFIG_SDCARD #define CONFIG_DEF_HWCONFIG "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" -- cgit v1.3.1 From f49b8c1b5d9db6d349000b25312c672a1f6627b8 Mon Sep 17 00:00:00 2001 From: tang yuantian Date: Wed, 17 Dec 2014 15:42:54 +0800 Subject: mpc85xx/t102xrdb: convert deep sleep to generic board interface A new deep sleep interface is introduced to support generic board structure. Converts it to use new interface. Besides, added SPI/SD/NAND boot deep sleep support. Signed-off-by: Tang Yuantian Reviewed-by: York Sun --- board/freescale/t102xrdb/ddr.c | 19 +++++++++++++++++++ board/freescale/t102xrdb/spl.c | 7 +++++++ board/freescale/t102xrdb/t102xrdb.c | 23 +++++++++++------------ include/configs/T102xRDB.h | 21 ++++++++++++--------- 4 files changed, 49 insertions(+), 21 deletions(-) (limited to 'include') diff --git a/board/freescale/t102xrdb/ddr.c b/board/freescale/t102xrdb/ddr.c index a20330b1d01..a2a8f4ccf04 100644 --- a/board/freescale/t102xrdb/ddr.c +++ b/board/freescale/t102xrdb/ddr.c @@ -11,6 +11,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -136,6 +137,19 @@ found: #endif } +#if defined(CONFIG_DEEP_SLEEP) +void board_mem_sleep_setup(void) +{ + void __iomem *cpld_base = (void *)CONFIG_SYS_CPLD_BASE; + + /* does not provide HW signals for power management */ + clrbits_8(cpld_base + 0x17, 0x40); + /* Disable MCKE isolation */ + gpio_set_value(2, 0); + udelay(1); +} +#endif + phys_size_t initdram(int board_type) { phys_size_t dram_size; @@ -150,5 +164,10 @@ phys_size_t initdram(int board_type) /* DDR has been initialised by first stage boot loader */ dram_size = fsl_ddr_sdram_size(); #endif + +#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD) + fsl_dp_resume(); +#endif + return dram_size; } diff --git a/board/freescale/t102xrdb/spl.c b/board/freescale/t102xrdb/spl.c index dd2dec44121..1a3a9964396 100644 --- a/board/freescale/t102xrdb/spl.c +++ b/board/freescale/t102xrdb/spl.c @@ -11,6 +11,7 @@ #include #include #include +#include "../common/sleep.h" DECLARE_GLOBAL_DATA_PTR; @@ -42,6 +43,12 @@ void board_init_f(ulong bootflag) console_init_f(); +#ifdef CONFIG_DEEP_SLEEP + /* disable the console if boot from deep sleep */ + if (is_warm_boot()) + fsl_dp_disable_console(); +#endif + /* initialize selected port with appropriate baud rate */ sys_clk = get_board_sys_clk(); plat_ratio = (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f; diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c index f5c438ded3b..96457cf01a3 100644 --- a/board/freescale/t102xrdb/t102xrdb.c +++ b/board/freescale/t102xrdb/t102xrdb.c @@ -16,10 +16,10 @@ #include #include #include -#include #include #include "t102xrdb.h" #include "cpld.h" +#include "../common/sleep.h" DECLARE_GLOBAL_DATA_PTR; @@ -55,6 +55,16 @@ int checkboard(void) return 0; } +int board_early_init_f(void) +{ +#if defined(CONFIG_DEEP_SLEEP) + if (is_warm_boot()) + fsl_dp_disable_console(); +#endif + + return 0; +} + int board_early_init_r(void) { #ifdef CONFIG_SYS_FLASH_BASE @@ -131,14 +141,3 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } - -#ifdef CONFIG_DEEP_SLEEP -void board_mem_sleep_setup(void) -{ - /* does not provide HW signals for power management */ - CPLD_WRITE(misc_ctl_status, (CPLD_READ(misc_ctl_status) & ~0x40)); - /* Disable MCKE isolation */ - gpio_set_value(2, 0); - udelay(1); -} -#endif diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 82b669ba6ed..e6222f3e179 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -36,7 +36,10 @@ /* support deep sleep */ #define CONFIG_DEEP_SLEEP +#if defined(CONFIG_DEEP_SLEEP) #define CONFIG_SILENT_CONSOLE +#define CONFIG_BOARD_EARLY_INIT_F +#endif #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg @@ -51,7 +54,7 @@ #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ -#define CONFIG_SYS_TEXT_BASE 0x00201000 +#define CONFIG_SYS_TEXT_BASE 0x30001000 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 #define CONFIG_SPL_PAD_TO 0x40000 #define CONFIG_SPL_MAX_SIZE 0x28000 @@ -67,21 +70,21 @@ #ifdef CONFIG_NAND #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 -#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 +#define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 +#define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #define CONFIG_SPL_NAND_BOOT #endif #ifdef CONFIG_SPIFLASH -#define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC +#define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" #ifndef CONFIG_SPL_BUILD @@ -91,12 +94,12 @@ #endif #ifdef CONFIG_SDCARD -#define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC +#define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) -#define CONFIG_SYS_MMC_U_BOOT_START (0x00200000) +#define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) +#define CONFIG_SYS_MMC_U_BOOT_START (0x30000000) #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" #ifndef CONFIG_SPL_BUILD -- cgit v1.3.1 From e26416a3f1631b906776a4e965313b3269faf259 Mon Sep 17 00:00:00 2001 From: Shengzhou Liu Date: Wed, 17 Dec 2014 16:51:08 +0800 Subject: powerpc/t1024rdb: Add support for T1024RDB-PB T1024RDB-PB board adds 2.5G SGMII support with AQR105 PHY. rcw_0x095 is used for 10G XFI + 3x PCIex1 rcw_0x135 is used for 2.5G SGMII + 2x PCIex1 Signed-off-by: Shengzhou Liu Reviewed-by: York Sun --- board/freescale/t102xrdb/cpld.h | 4 ++++ board/freescale/t102xrdb/eth_t102xrdb.c | 30 +++++++++++++++++++++++++++--- board/freescale/t102xrdb/t102xrdb.c | 31 ++++++++++++++++++++++++++++++- include/configs/T102xRDB.h | 2 ++ 4 files changed, 63 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/board/freescale/t102xrdb/cpld.h b/board/freescale/t102xrdb/cpld.h index 5a3100f6070..db50f818fbb 100644 --- a/board/freescale/t102xrdb/cpld.h +++ b/board/freescale/t102xrdb/cpld.h @@ -43,3 +43,7 @@ void cpld_write(unsigned int reg, u8 value); #define CPLD_LBMAP_RESET 0xFF #define CPLD_LBMAP_SHIFT 0x03 #define CPLD_BOOT_SEL 0x80 + +#define CPLD_PCIE_SGMII_MUX 0x80 +#define CPLD_OVERRIDE_BOOT_EN 0x01 +#define CPLD_OVERRIDE_MUX_EN 0x02 /* PCIE/2.5G-SGMII mux override enable */ diff --git a/board/freescale/t102xrdb/eth_t102xrdb.c b/board/freescale/t102xrdb/eth_t102xrdb.c index 2e400c4ebf1..f611ff07e98 100644 --- a/board/freescale/t102xrdb/eth_t102xrdb.c +++ b/board/freescale/t102xrdb/eth_t102xrdb.c @@ -21,6 +21,7 @@ #include #include #include +#include "../common/fman.h" int board_eth_init(bd_t *bis) { @@ -51,15 +52,22 @@ int board_eth_init(bd_t *bis) /* Register the 10G MDIO bus */ fm_memac_mdio_init(bis, &tgec_mdio_info); - /* Set the two on-board RGMII PHY address */ - fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY2_ADDR); + /* Set the on-board RGMII PHY address */ fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY1_ADDR); switch (srds_s1) { case 0x95: - /* 10G XFI with Aquantia PHY */ + /* set the on-board RGMII2 PHY */ + fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY2_ADDR); + + /* set 10G XFI with Aquantia AQR105 PHY */ fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); break; + case 0x77: + case 0x135: + /* set the on-board 2.5G SGMII AQR105 PHY */ + fm_info_set_phy_address(FM1_DTSEC3, SGMII_PHY1_ADDR); + break; default: printf("SerDes protocol 0x%x is not supported on T102xRDB\n", srds_s1); @@ -73,6 +81,10 @@ int board_eth_init(bd_t *bis) dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); fm_info_set_mdio(i, dev); break; + case PHY_INTERFACE_MODE_SGMII_2500: + dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME); + fm_info_set_mdio(i, dev); + break; default: break; } @@ -95,6 +107,18 @@ int board_eth_init(bd_t *bis) return pci_eth_init(bis); } +void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, + enum fm_port port, int offset) +{ + if ((fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII_2500) && + (port == FM1_DTSEC3)) { + fdt_set_phy_handle(fdt, compat, addr, "sg_2500_aqr105_phy4"); + fdt_setprop(fdt, offset, "phy-connection-type", + "sgmii-2500", 10); + fdt_status_disabled_by_alias(fdt, "xg_aqr105_phy3"); + } +} + void fdt_fixup_board_enet(void *fdt) { } diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c index 96457cf01a3..e196f12ac7a 100644 --- a/board/freescale/t102xrdb/t102xrdb.c +++ b/board/freescale/t102xrdb/t102xrdb.c @@ -27,6 +27,11 @@ int checkboard(void) { struct cpu_type *cpu = gd->arch.cpu; static const char *freq[3] = {"100.00MHZ", "125.00MHz", "156.25MHZ"}; + ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_s1; + + srds_s1 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; printf("Board: %sRDB, ", cpu->name); printf("Board rev: 0x%02x CPLD ver: 0x%02x, boot from ", @@ -50,11 +55,34 @@ int checkboard(void) #endif puts("SERDES Reference Clocks:\n"); - printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]); + if (srds_s1 == 0x95) + printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]); + else + printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[0], freq[0]); return 0; } +static void board_mux_lane(void) +{ + ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_prtcl_s1; + u8 reg = CPLD_READ(misc_ctl_status); + + srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + + if (srds_prtcl_s1 == 0x95) { + /* Route Lane B to PCIE */ + CPLD_WRITE(misc_ctl_status, reg & ~CPLD_PCIE_SGMII_MUX); + } else { + /* Route Lane B to SGMII */ + CPLD_WRITE(misc_ctl_status, reg | CPLD_PCIE_SGMII_MUX); + } + CPLD_WRITE(boot_override, CPLD_OVERRIDE_MUX_EN); +} + int board_early_init_f(void) { #if defined(CONFIG_DEEP_SLEEP) @@ -96,6 +124,7 @@ int board_early_init_r(void) #ifdef CONFIG_SYS_DPAA_QBMAN setup_portals(); #endif + board_mux_lane(); return 0; } diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index e6222f3e179..bd40d6ac93c 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -762,8 +762,10 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_FMAN_ENET #define CONFIG_PHYLIB_10G #define CONFIG_PHY_REALTEK +#define CONFIG_PHY_AQUANTIA #define RGMII_PHY1_ADDR 0x2 #define RGMII_PHY2_ADDR 0x6 +#define SGMII_PHY1_ADDR 0x2 #define FM1_10GEC1_PHY_ADDR 0x1 #endif -- cgit v1.3.1 From 2c537642e98969e1810c6fdeff3099584f674a66 Mon Sep 17 00:00:00 2001 From: tang yuantian Date: Thu, 18 Dec 2014 09:55:07 +0800 Subject: mpc85xx/t102xqds: convert deep sleep to generic board interface A new deep sleep interface is introduced to support generic board structure. Converts it to use new interface. Signed-off-by: Tang Yuantian Reviewed-by: York Sun --- board/freescale/t102xqds/ddr.c | 19 +++++++++++++++++++ board/freescale/t102xqds/t102xqds.c | 23 +++++++++++------------ include/configs/T102xQDS.h | 3 +++ 3 files changed, 33 insertions(+), 12 deletions(-) (limited to 'include') diff --git a/board/freescale/t102xqds/ddr.c b/board/freescale/t102xqds/ddr.c index 46fc64e5280..2d4d10f351a 100644 --- a/board/freescale/t102xqds/ddr.c +++ b/board/freescale/t102xqds/ddr.c @@ -11,6 +11,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -152,6 +153,19 @@ found: #endif } +#if defined(CONFIG_DEEP_SLEEP) +void board_mem_sleep_setup(void) +{ + void __iomem *qixis_base = (void *)QIXIS_BASE; + + /* does not provide HW signals for power management */ + clrbits_8(qixis_base + 0x21, 0x2); + /* Disable MCKE isolation */ + gpio_set_value(2, 0); + udelay(1); +} +#endif + phys_size_t initdram(int board_type) { phys_size_t dram_size; @@ -166,5 +180,10 @@ phys_size_t initdram(int board_type) /* DDR has been initialised by first stage boot loader */ dram_size = fsl_ddr_sdram_size(); #endif + +#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD) + fsl_dp_resume(); +#endif + return dram_size; } diff --git a/board/freescale/t102xqds/t102xqds.c b/board/freescale/t102xqds/t102xqds.c index f3141b58e8d..708afcaebfa 100644 --- a/board/freescale/t102xqds/t102xqds.c +++ b/board/freescale/t102xqds/t102xqds.c @@ -19,10 +19,10 @@ #include #include #include -#include #include "../common/qixis.h" #include "t102xqds.h" #include "t102xqds_qixis.h" +#include "../common/sleep.h" DECLARE_GLOBAL_DATA_PTR; @@ -242,6 +242,16 @@ void board_retimer_ds125df111_init(void) i2c_write(I2C_RETIMER_ADDR, 0x64, 1, ®, 1); } +int board_early_init_f(void) +{ +#if defined(CONFIG_DEEP_SLEEP) + if (is_warm_boot()) + fsl_dp_disable_console(); +#endif + + return 0; +} + int board_early_init_r(void) { #ifdef CONFIG_SYS_FLASH_BASE @@ -395,14 +405,3 @@ void qixis_dump_switch(void) printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1])); } } - -#ifdef CONFIG_DEEP_SLEEP -void board_mem_sleep_setup(void) -{ - /* does not provide HW signals for power management */ - QIXIS_WRITE(pwr_ctl[1], (QIXIS_READ(pwr_ctl[1]) & ~0x2)); - /* Disable MCKE isolation */ - gpio_set_value(2, 0); - udelay(1); -} -#endif diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index c2bdbb99eda..3f02cede320 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -35,7 +35,10 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_DEEP_SLEEP +#if defined(CONFIG_DEEP_SLEEP) #define CONFIG_SILENT_CONSOLE +#define CONFIG_BOARD_EARLY_INIT_F +#endif #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg -- cgit v1.3.1 From 7d0e97a2945c9da47ad4655f2e3de7e36b5cd7ac Mon Sep 17 00:00:00 2001 From: tang yuantian Date: Thu, 18 Dec 2014 10:20:07 +0800 Subject: mpc85xx/t1040qds: convert deep sleep to generic board interface A new deep sleep interface is introduced to support generic board structure. Converts it to use new interface. Signed-off-by: Tang Yuantian Reviewed-by: York Sun --- board/freescale/t1040qds/ddr.c | 19 +++++++++++++++++++ board/freescale/t1040qds/t1040qds.c | 23 +++++++++++------------ include/configs/T1040QDS.h | 3 +++ 3 files changed, 33 insertions(+), 12 deletions(-) (limited to 'include') diff --git a/board/freescale/t1040qds/ddr.c b/board/freescale/t1040qds/ddr.c index 43f952f9c03..82402408a74 100644 --- a/board/freescale/t1040qds/ddr.c +++ b/board/freescale/t1040qds/ddr.c @@ -11,6 +11,7 @@ #include #include #include +#include #include "ddr.h" DECLARE_GLOBAL_DATA_PTR; @@ -100,6 +101,19 @@ found: #endif } +#if defined(CONFIG_DEEP_SLEEP) +void board_mem_sleep_setup(void) +{ + void __iomem *qixis_base = (void *)QIXIS_BASE; + + /* does not provide HW signals for power management */ + clrbits_8(qixis_base + 0x21, 0x2); + /* Disable MCKE isolation */ + gpio_set_value(2, 0); + udelay(1); +} +#endif + phys_size_t initdram(int board_type) { phys_size_t dram_size; @@ -112,5 +126,10 @@ phys_size_t initdram(int board_type) dram_size *= 0x100000; puts(" DDR: "); + +#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD) + fsl_dp_resume(); +#endif + return dram_size; } diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c index 13285be42cf..eaca57fc5df 100644 --- a/board/freescale/t1040qds/t1040qds.c +++ b/board/freescale/t1040qds/t1040qds.c @@ -19,8 +19,8 @@ #include #include #include -#include +#include "../common/sleep.h" #include "../common/qixis.h" #include "t1040qds.h" #include "t1040qds_qixis.h" @@ -115,6 +115,16 @@ static void qe_board_setup(void) } } +int board_early_init_f(void) +{ +#if defined(CONFIG_DEEP_SLEEP) + if (is_warm_boot()) + fsl_dp_disable_console(); +#endif + + return 0; +} + int board_early_init_r(void) { #ifdef CONFIG_SYS_FLASH_BASE @@ -281,14 +291,3 @@ int board_need_mem_reset(void) { return 1; } - -#ifdef CONFIG_DEEP_SLEEP -void board_mem_sleep_setup(void) -{ - /* does not provide HW signals for power management */ - QIXIS_WRITE(pwr_ctl[1], (QIXIS_READ(pwr_ctl[1]) & ~0x2)); - /* Disable MCKE isolation */ - gpio_set_value(2, 0); - udelay(1); -} -#endif diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index b70bdfe5e79..5ebc8709aa1 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -47,7 +47,10 @@ /* support deep sleep */ #define CONFIG_DEEP_SLEEP +#if defined(CONFIG_DEEP_SLEEP) #define CONFIG_SILENT_CONSOLE +#define CONFIG_BOARD_EARLY_INIT_F +#endif #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xeff40000 -- cgit v1.3.1 From f7c38cf827a0cf9d5ab4ca60131dffa10a2e4309 Mon Sep 17 00:00:00 2001 From: Shaohui Xie Date: Tue, 30 Dec 2014 18:32:04 +0800 Subject: phylib: add support for aquantia PHYs This patch supports AQ1202, AQ2104, AQR105 PHY. Signed-off-by: Shaohui Xie Acked-by: Joe Hershberger Reviewed-by: York Sun --- drivers/net/phy/Makefile | 1 + drivers/net/phy/aquantia.c | 156 +++++++++++++++++++++++++++++++++++++++++++++ drivers/net/phy/phy.c | 3 + include/phy.h | 1 + 4 files changed, 161 insertions(+) create mode 100644 drivers/net/phy/aquantia.c (limited to 'include') diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index f46bf00abe4..d096db87a27 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_MV88E6352_SWITCH) += mv88e6352.o obj-$(CONFIG_PHYLIB) += phy.o obj-$(CONFIG_PHYLIB_10G) += generic_10g.o +obj-$(CONFIG_PHY_AQUANTIA) += aquantia.o obj-$(CONFIG_PHY_ATHEROS) += atheros.o obj-$(CONFIG_PHY_BROADCOM) += broadcom.o obj-$(CONFIG_PHY_CORTINA) += cortina.o diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c new file mode 100644 index 00000000000..ef4da4e2ece --- /dev/null +++ b/drivers/net/phy/aquantia.c @@ -0,0 +1,156 @@ +/* + * Aquantia PHY drivers + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Copyright 2014 Freescale Semiconductor, Inc. + */ +#include +#include +#include + +#ifndef CONFIG_PHYLIB_10G +#error The Aquantia PHY needs 10G support +#endif + +#define AQUNTIA_10G_CTL 0x20 +#define AQUNTIA_VENDOR_P1 0xc400 + +#define AQUNTIA_SPEED_LSB_MASK 0x2000 +#define AQUNTIA_SPEED_MSB_MASK 0x40 + +int aquantia_config(struct phy_device *phydev) +{ + u32 val = phy_read(phydev, MDIO_MMD_PMAPMD, MII_BMCR); + + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { + /* 1000BASE-T mode */ + phydev->advertising = SUPPORTED_1000baseT_Full; + phydev->supported = phydev->advertising; + + val = (val & ~AQUNTIA_SPEED_LSB_MASK) | AQUNTIA_SPEED_MSB_MASK; + phy_write(phydev, MDIO_MMD_PMAPMD, MII_BMCR, val); + } else if (phydev->interface == PHY_INTERFACE_MODE_XGMII) { + /* 10GBASE-T mode */ + phydev->advertising = SUPPORTED_10000baseT_Full; + phydev->supported = phydev->advertising; + + if (!(val & AQUNTIA_SPEED_LSB_MASK) || + !(val & AQUNTIA_SPEED_MSB_MASK)) + phy_write(phydev, MDIO_MMD_PMAPMD, MII_BMCR, + AQUNTIA_SPEED_LSB_MASK | + AQUNTIA_SPEED_MSB_MASK); + } else if (phydev->interface == PHY_INTERFACE_MODE_SGMII_2500) { + /* 2.5GBASE-T mode */ + phydev->advertising = SUPPORTED_1000baseT_Full; + phydev->supported = phydev->advertising; + + phy_write(phydev, MDIO_MMD_AN, AQUNTIA_10G_CTL, 1); + phy_write(phydev, MDIO_MMD_AN, AQUNTIA_VENDOR_P1, 0x9440); + } else if (phydev->interface == PHY_INTERFACE_MODE_MII) { + /* 100BASE-TX mode */ + phydev->advertising = SUPPORTED_100baseT_Full; + phydev->supported = phydev->advertising; + + val = (val & ~AQUNTIA_SPEED_MSB_MASK) | AQUNTIA_SPEED_LSB_MASK; + phy_write(phydev, MDIO_MMD_PMAPMD, MII_BMCR, val); + } + return 0; +} + +int aquantia_startup(struct phy_device *phydev) +{ + u32 reg, speed; + int i = 0; + + phydev->duplex = DUPLEX_FULL; + + /* if the AN is still in progress, wait till timeout. */ + phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1); + reg = phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1); + if (!(reg & MDIO_AN_STAT1_COMPLETE)) { + printf("%s Waiting for PHY auto negotiation to complete", + phydev->dev->name); + do { + udelay(1000); + reg = phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1); + if ((i++ % 500) == 0) + printf("."); + } while (!(reg & MDIO_AN_STAT1_COMPLETE) && + i < (4 * PHY_ANEG_TIMEOUT)); + + if (i > PHY_ANEG_TIMEOUT) + printf(" TIMEOUT !\n"); + } + + /* Read twice because link state is latched and a + * read moves the current state into the register */ + phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1); + reg = phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1); + if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS)) + phydev->link = 0; + else + phydev->link = 1; + + speed = phy_read(phydev, MDIO_MMD_PMAPMD, MII_BMCR); + if (speed & AQUNTIA_SPEED_MSB_MASK) { + if (speed & AQUNTIA_SPEED_LSB_MASK) + phydev->speed = SPEED_10000; + else + phydev->speed = SPEED_1000; + } else { + if (speed & AQUNTIA_SPEED_LSB_MASK) + phydev->speed = SPEED_100; + else + phydev->speed = SPEED_10; + } + + return 0; +} + +struct phy_driver aq1202_driver = { + .name = "Aquantia AQ1202", + .uid = 0x3a1b445, + .mask = 0xfffffff0, + .features = PHY_10G_FEATURES, + .mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS| + MDIO_MMD_PHYXS | MDIO_MMD_AN | + MDIO_MMD_VEND1), + .config = &aquantia_config, + .startup = &aquantia_startup, + .shutdown = &gen10g_shutdown, +}; + +struct phy_driver aq2104_driver = { + .name = "Aquantia AQ2104", + .uid = 0x3a1b460, + .mask = 0xfffffff0, + .features = PHY_10G_FEATURES, + .mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS| + MDIO_MMD_PHYXS | MDIO_MMD_AN | + MDIO_MMD_VEND1), + .config = &aquantia_config, + .startup = &aquantia_startup, + .shutdown = &gen10g_shutdown, +}; + +struct phy_driver aqr105_driver = { + .name = "Aquantia AQR105", + .uid = 0x3a1b4a2, + .mask = 0xfffffff0, + .features = PHY_10G_FEATURES, + .mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS| + MDIO_MMD_PHYXS | MDIO_MMD_AN | + MDIO_MMD_VEND1), + .config = &aquantia_config, + .startup = &aquantia_startup, + .shutdown = &gen10g_shutdown, +}; +int phy_aquantia_init(void) +{ + phy_register(&aq1202_driver); + phy_register(&aq2104_driver); + phy_register(&aqr105_driver); + + return 0; +} diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 5b04c859390..df7e9450c26 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -442,6 +442,9 @@ static LIST_HEAD(phy_drivers); int phy_init(void) { +#ifdef CONFIG_PHY_AQUANTIA + phy_aquantia_init(); +#endif #ifdef CONFIG_PHY_ATHEROS phy_atheros_init(); #endif diff --git a/include/phy.h b/include/phy.h index 1e282e2964e..d117fc1634b 100644 --- a/include/phy.h +++ b/include/phy.h @@ -225,6 +225,7 @@ int gen10g_startup(struct phy_device *phydev); int gen10g_shutdown(struct phy_device *phydev); int gen10g_discover_mmds(struct phy_device *phydev); +int phy_aquantia_init(void); int phy_atheros_init(void); int phy_broadcom_init(void); int phy_cortina_init(void); -- cgit v1.3.1 From 6706b115a632ac46ff13fd457c7b8a507b922d50 Mon Sep 17 00:00:00 2001 From: Codrin Ciubotariu Date: Mon, 12 Jan 2015 14:08:33 +0200 Subject: net/vsc9953: Add driver for Vitesse VSC9953 L2 Switch IP This patch adds a driver for VSC9953 L2 Switch. This Vitesse IP is integrated in Freescale T1040 and T1020 SoCs. The L2 switch has 10 Ethernet ports: 2 internal fixed-links (ports 8 and 9) at 2.5 Gbps and and 8 external ports at 1 Gbps. The external ports may be connected to PHYs over QSGMII and SGMII. Commands have also been added to enable/disable a port and to check a port's link speed, duplexity and status. The commands are: ethsw port enable|disable - enable/disable an l2 switch port ethsw port show - show an l2 switch port's configuration port_nr=0..9; use "all" for all ports For more detailse please see doc/README.t1040-l2switch Signed-off-by: Codrin Ciubotariu Acked-by: Joe Hershberger Reviewed-by: York Sun --- doc/README.t1040-l2switch | 48 +++++ drivers/net/Makefile | 1 + drivers/net/vsc9953.c | 497 ++++++++++++++++++++++++++++++++++++++++++++++ include/vsc9953.h | 402 +++++++++++++++++++++++++++++++++++++ 4 files changed, 948 insertions(+) create mode 100644 doc/README.t1040-l2switch create mode 100644 drivers/net/vsc9953.c create mode 100644 include/vsc9953.h (limited to 'include') diff --git a/doc/README.t1040-l2switch b/doc/README.t1040-l2switch new file mode 100644 index 00000000000..14dbf31bf23 --- /dev/null +++ b/doc/README.t1040-l2switch @@ -0,0 +1,48 @@ +This file contains information for VSC9953, a Vitesse L2 Switch IP +which is integrated in the T1040/T1020 Freescale SoCs. + +About Device: +============= +VSC9953 is an 8-port Gigabit Ethernet switch supports the following features: + - 8192 MAC addresses + - Static Address provisioning + - Dynamic learning of MAC addresses and aging + - 4096 VLANs + - Independent and shared VLAN learning (IVL, SVL) + - Policing with storm control and MC/BC protection + - IPv4 and IPv6 multicast + - Jumbo frames (9.6 KB) + - Access Control List + - VLAN editing, translation and remarking + - RMON counters per port + +Switch interfaces: + - 8 Gigabit switch ports (ports 0 to 7) are external and are connected to external PHYs + - 2 switch ports (ports 8 and 9) of 2.5 G are connected (fixed links) + to FMan ports (FM1@DTSEC1 and FM1@DTSEC2) + +Commands Overview: +============= +Commands supported + - enable/disable a port + - check a port's link speed, duplexity and status. + +Commands syntax + ethsw port enable|disable - enable/disable an l2 switch port + ethsw port show - show an l2 switch port's configuration + + port_nr=0..9; use "all" for all ports + +=> ethsw port all show + Port Status Link Speed Duplex + 0 enabled down 10 half + 1 enabled down 10 half + 2 enabled down 10 half + 3 enabled up 1000 full + 4 disabled down - half + 5 disabled down - half + 6 disabled down - half + 7 disabled down - half + 8 enabled up 2500 full + 9 enabled up 2500 full +=> diff --git a/drivers/net/Makefile b/drivers/net/Makefile index fb0cf8c1cf1..46c4ac697d6 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -66,3 +66,4 @@ obj-$(CONFIG_XILINX_LL_TEMAC) += xilinx_ll_temac.o xilinx_ll_temac_mdio.o \ xilinx_ll_temac_fifo.o xilinx_ll_temac_sdma.o obj-$(CONFIG_ZYNQ_GEM) += zynq_gem.o obj-$(CONFIG_FSL_MC_ENET) += fsl_mc/ +obj-$(CONFIG_VSC9953) += vsc9953.o diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c new file mode 100644 index 00000000000..9fc3c18ba21 --- /dev/null +++ b/drivers/net/vsc9953.c @@ -0,0 +1,497 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Driver for the Vitesse VSC9953 L2 Switch + */ + +#include +#include +#include +#include +#include + +static struct vsc9953_info vsc9953_l2sw = { + .port[0] = VSC9953_PORT_INFO_INITIALIZER(0), + .port[1] = VSC9953_PORT_INFO_INITIALIZER(1), + .port[2] = VSC9953_PORT_INFO_INITIALIZER(2), + .port[3] = VSC9953_PORT_INFO_INITIALIZER(3), + .port[4] = VSC9953_PORT_INFO_INITIALIZER(4), + .port[5] = VSC9953_PORT_INFO_INITIALIZER(5), + .port[6] = VSC9953_PORT_INFO_INITIALIZER(6), + .port[7] = VSC9953_PORT_INFO_INITIALIZER(7), + .port[8] = VSC9953_PORT_INFO_INITIALIZER(8), + .port[9] = VSC9953_PORT_INFO_INITIALIZER(9), +}; + +void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus) +{ + if (!VSC9953_PORT_CHECK(port)) + return; + + vsc9953_l2sw.port[port].bus = bus; +} + +void vsc9953_port_info_set_phy_address(int port, int address) +{ + if (!VSC9953_PORT_CHECK(port)) + return; + + vsc9953_l2sw.port[port].phyaddr = address; +} + +void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int) +{ + if (!VSC9953_PORT_CHECK(port)) + return; + + vsc9953_l2sw.port[port].enet_if = phy_int; +} + +void vsc9953_port_enable(int port) +{ + if (!VSC9953_PORT_CHECK(port)) + return; + + vsc9953_l2sw.port[port].enabled = 1; +} + +void vsc9953_port_disable(int port) +{ + if (!VSC9953_PORT_CHECK(port)) + return; + + vsc9953_l2sw.port[port].enabled = 0; +} + +static void vsc9953_mdio_write(struct vsc9953_mii_mng *phyregs, int port_addr, + int regnum, int value) +{ + int timeout = 50000; + + out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) | + ((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) | + (0x1 << 1)); + asm("sync"); + + while ((in_le32(&phyregs->miimstatus) & 0x8) && --timeout) + udelay(1); + + if (timeout == 0) + debug("Timeout waiting for MDIO write\n"); +} + +static int vsc9953_mdio_read(struct vsc9953_mii_mng *phyregs, int port_addr, + int regnum) +{ + int value = 0xFFFF; + int timeout = 50000; + + while ((in_le32(&phyregs->miimstatus) & MIIMIND_OPR_PEND) && --timeout) + udelay(1); + if (timeout == 0) { + debug("Timeout waiting for MDIO operation to finish\n"); + return value; + } + + /* Put the address of the phy, and the register + * number into MIICMD + */ + out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) | + ((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) | + (0x2 << 1)); + + timeout = 50000; + /* Wait for the the indication that the read is done */ + while ((in_le32(&phyregs->miimstatus) & 0x8) && --timeout) + udelay(1); + if (timeout == 0) + debug("Timeout waiting for MDIO read\n"); + + /* Grab the value read from the PHY */ + value = in_le32(&phyregs->miimdata); + + if ((value & 0x00030000) == 0) + return value & 0x0000ffff; + + return value; +} + +static int init_phy(struct eth_device *dev) +{ + struct vsc9953_port_info *l2sw_port = dev->priv; + struct phy_device *phydev = NULL; + +#ifdef CONFIG_PHYLIB + if (!l2sw_port->bus) + return 0; + phydev = phy_connect(l2sw_port->bus, l2sw_port->phyaddr, dev, + l2sw_port->enet_if); + if (!phydev) { + printf("Failed to connect\n"); + return -1; + } + + phydev->supported &= SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full; + phydev->advertising = phydev->supported; + + l2sw_port->phydev = phydev; + + phy_config(phydev); +#endif + + return 0; +} + +static int vsc9953_port_init(int port) +{ + struct eth_device *dev; + + /* Internal ports never have a PHY */ + if (VSC9953_INTERNAL_PORT_CHECK(port)) + return 0; + + /* alloc eth device */ + dev = (struct eth_device *)calloc(1, sizeof(struct eth_device)); + if (!dev) + return 1; + + sprintf(dev->name, "SW@PORT%d", port); + dev->priv = &vsc9953_l2sw.port[port]; + dev->init = NULL; + dev->halt = NULL; + dev->send = NULL; + dev->recv = NULL; + + if (init_phy(dev)) { + free(dev); + return 1; + } + + return 0; +} + +void vsc9953_init(bd_t *bis) +{ + u32 i, hdx_cfg = 0, phy_addr = 0; + int timeout; + struct vsc9953_system_reg *l2sys_reg; + struct vsc9953_qsys_reg *l2qsys_reg; + struct vsc9953_dev_gmii *l2dev_gmii_reg; + struct vsc9953_analyzer *l2ana_reg; + struct vsc9953_devcpu_gcb *l2dev_gcb; + + l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(VSC9953_OFFSET + + VSC9953_DEV_GMII_OFFSET); + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + l2sys_reg = (struct vsc9953_system_reg *)(VSC9953_OFFSET + + VSC9953_SYS_OFFSET); + + l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + + VSC9953_QSYS_OFFSET); + + l2dev_gcb = (struct vsc9953_devcpu_gcb *)(VSC9953_OFFSET + + VSC9953_DEVCPU_GCB); + + out_le32(&l2dev_gcb->chip_regs.soft_rst, + CONFIG_VSC9953_SOFT_SWC_RST_ENA); + timeout = 50000; + while ((in_le32(&l2dev_gcb->chip_regs.soft_rst) & + CONFIG_VSC9953_SOFT_SWC_RST_ENA) && --timeout) + udelay(1); /* busy wait for vsc9953 soft reset */ + if (timeout == 0) + debug("Timeout waiting for VSC9953 to reset\n"); + + out_le32(&l2sys_reg->sys.reset_cfg, CONFIG_VSC9953_MEM_ENABLE | + CONFIG_VSC9953_MEM_INIT); + + timeout = 50000; + while ((in_le32(&l2sys_reg->sys.reset_cfg) & + CONFIG_VSC9953_MEM_INIT) && --timeout) + udelay(1); /* busy wait for vsc9953 memory init */ + if (timeout == 0) + debug("Timeout waiting for VSC9953 memory to initialize\n"); + + out_le32(&l2sys_reg->sys.reset_cfg, (in_le32(&l2sys_reg->sys.reset_cfg) + | CONFIG_VSC9953_CORE_ENABLE)); + + /* VSC9953 Setting to be done once only */ + out_le32(&l2qsys_reg->sys.ext_cpu_cfg, 0x00000b00); + + for (i = 0; i < VSC9953_MAX_PORTS; i++) { + if (vsc9953_port_init(i)) + printf("Failed to initialize l2switch port %d\n", i); + + /* Enable VSC9953 GMII Ports Port ID 0 - 7 */ + if (VSC9953_INTERNAL_PORT_CHECK(i)) { + out_le32(&l2ana_reg->pfc[i].pfc_cfg, + CONFIG_VSC9953_PFC_FC_QSGMII); + out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i], + CONFIG_VSC9953_MAC_FC_CFG_QSGMII); + } else { + out_le32(&l2ana_reg->pfc[i].pfc_cfg, + CONFIG_VSC9953_PFC_FC); + out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i], + CONFIG_VSC9953_MAC_FC_CFG); + } + out_le32(&l2dev_gmii_reg->port_mode.clock_cfg, + CONFIG_VSC9953_CLOCK_CFG); + out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ena_cfg, + CONFIG_VSC9953_MAC_ENA_CFG); + out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_mode_cfg, + CONFIG_VSC9953_MAC_MODE_CFG); + out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ifg_cfg, + CONFIG_VSC9953_MAC_IFG_CFG); + /* mac_hdx_cfg varies with port id*/ + hdx_cfg = (CONFIG_VSC9953_MAC_HDX_CFG | (i << 16)); + out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_hdx_cfg, hdx_cfg); + out_le32(&l2sys_reg->sys.front_port_mode[i], + CONFIG_VSC9953_FRONT_PORT_MODE); + out_le32(&l2qsys_reg->sys.switch_port_mode[i], + CONFIG_VSC9953_PORT_ENA); + out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_maxlen_cfg, + CONFIG_VSC9953_MAC_MAX_LEN); + out_le32(&l2sys_reg->pause_cfg.pause_cfg[i], + CONFIG_VSC9953_PAUSE_CFG); + /* WAIT FOR 2 us*/ + udelay(2); + + l2dev_gmii_reg = (struct vsc9953_dev_gmii *)( + (char *)l2dev_gmii_reg + + T1040_SWITCH_GMII_DEV_OFFSET); + + /* Initialize Lynx PHY Wrappers */ + phy_addr = 0; + if (vsc9953_l2sw.port[i].enet_if == + PHY_INTERFACE_MODE_QSGMII) + phy_addr = (i + 0x4) & 0x1F; + else if (vsc9953_l2sw.port[i].enet_if == + PHY_INTERFACE_MODE_SGMII) + phy_addr = (i + 1) & 0x1F; + + if (phy_addr) { + /* SGMII IF mode + AN enable */ + vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, + 0x14, PHY_SGMII_IF_MODE_AN | + PHY_SGMII_IF_MODE_SGMII); + /* Dev ability according to SGMII specification */ + vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, + 0x4, PHY_SGMII_DEV_ABILITY_SGMII); + /* Adjust link timer for SGMII + * 1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 + */ + vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, + 0x13, 0x0003); + vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, + 0x12, 0x0d40); + /* Restart AN */ + vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, + 0x0, PHY_SGMII_CR_DEF_VAL | + PHY_SGMII_CR_RESET_AN); + + timeout = 50000; + while ((vsc9953_mdio_read(&l2dev_gcb->mii_mng[0], + phy_addr, 0x01) & 0x0020) && --timeout) + udelay(1); /* wait for AN to complete */ + if (timeout == 0) + debug("Timeout waiting for AN to complete\n"); + } + } + + printf("VSC9953 L2 switch initialized\n"); + return; +} + +#ifdef CONFIG_VSC9953_CMD +/* Enable/disable status of a VSC9953 port */ +static void vsc9953_port_status_set(int port_nr, u8 enabled) +{ + u32 val; + struct vsc9953_qsys_reg *l2qsys_reg; + + /* Administrative down */ + if (vsc9953_l2sw.port[port_nr].enabled == 0) + return; + + l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + + VSC9953_QSYS_OFFSET); + + val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_nr]); + if (enabled == 1) + val |= (1 << 13); + else + val &= ~(1 << 13); + + out_le32(&l2qsys_reg->sys.switch_port_mode[port_nr], val); +} + +/* Set all VSC9953 ports' status */ +static void vsc9953_port_all_status_set(u8 enabled) +{ + int i; + + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_port_status_set(i, enabled); +} + +/* Start autonegotiation for a VSC9953 PHY */ +static void vsc9953_phy_autoneg(int port_nr) +{ + if (!vsc9953_l2sw.port[port_nr].phydev) + return; + + if (vsc9953_l2sw.port[port_nr].phydev->drv->startup( + vsc9953_l2sw.port[port_nr].phydev)) + printf("Failed to start PHY for port %d\n", port_nr); +} + +/* Start autonegotiation for all VSC9953 PHYs */ +static void vsc9953_phy_all_autoneg(void) +{ + int i; + + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_phy_autoneg(i); +} + +/* Print a VSC9953 port's configuration */ +static void vsc9953_port_config_show(int port) +{ + int speed; + int duplex; + int link; + u8 enabled; + u32 val; + struct vsc9953_qsys_reg *l2qsys_reg; + + l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + + VSC9953_QSYS_OFFSET); + + val = in_le32(&l2qsys_reg->sys.switch_port_mode[port]); + enabled = vsc9953_l2sw.port[port].enabled & + ((val & 0x00002000) >> 13); + + /* internal ports (8 and 9) are fixed */ + if (VSC9953_INTERNAL_PORT_CHECK(port)) { + link = 1; + speed = SPEED_2500; + duplex = DUPLEX_FULL; + } else { + if (vsc9953_l2sw.port[port].phydev) { + link = vsc9953_l2sw.port[port].phydev->link; + speed = vsc9953_l2sw.port[port].phydev->speed; + duplex = vsc9953_l2sw.port[port].phydev->duplex; + } else { + link = -1; + speed = -1; + duplex = -1; + } + } + + printf("%8d ", port); + printf("%8s ", enabled == 1 ? "enabled" : "disabled"); + printf("%8s ", link == 1 ? "up" : "down"); + + switch (speed) { + case SPEED_10: + printf("%8d ", 10); + break; + case SPEED_100: + printf("%8d ", 100); + break; + case SPEED_1000: + printf("%8d ", 1000); + break; + case SPEED_2500: + printf("%8d ", 2500); + break; + case SPEED_10000: + printf("%8d ", 10000); + break; + default: + printf("%8s ", "-"); + } + + printf("%8s\n", duplex == DUPLEX_FULL ? "full" : "half"); +} + +/* Print VSC9953 ports' configuration */ +static void vsc9953_port_all_config_show(void) +{ + int i; + + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_port_config_show(i); +} + +/* function to interpret commands starting with "ethsw " */ +static int do_ethsw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + u8 enable; + u32 port; + + if (argc < 4) + return -1; + + if (strcmp(argv[1], "port")) + return -1; + + if (!strcmp(argv[3], "show")) { + if (!strcmp(argv[2], "all")) { + vsc9953_phy_all_autoneg(); + printf("%8s %8s %8s %8s %8s\n", + "Port", "Status", "Link", "Speed", + "Duplex"); + vsc9953_port_all_config_show(); + return 0; + } else { + port = simple_strtoul(argv[2], NULL, 10); + if (!VSC9953_PORT_CHECK(port)) + return -1; + vsc9953_phy_autoneg(port); + printf("%8s %8s %8s %8s %8s\n", + "Port", "Status", "Link", "Speed", + "Duplex"); + vsc9953_port_config_show(port); + return 0; + } + } else if (!strcmp(argv[3], "enable")) { + enable = 1; + } else if (!strcmp(argv[3], "disable")) { + enable = 0; + } else { + return -1; + } + + if (!strcmp(argv[2], "all")) { + vsc9953_port_all_status_set(enable); + return 0; + } else { + port = simple_strtoul(argv[2], NULL, 10); + if (!VSC9953_PORT_CHECK(port)) + return -1; + vsc9953_port_status_set(port, enable); + return 0; + } + + return -1; +} + +U_BOOT_CMD(ethsw, 5, 0, do_ethsw, + "vsc9953 l2 switch commands", + "port enable|disable\n" + " - enable/disable an l2 switch port\n" + " port_nr=0..9; use \"all\" for all ports\n" + "ethsw port show\n" + " - show an l2 switch port's configuration\n" + " port_nr=0..9; use \"all\" for all ports\n" +); +#endif /* CONFIG_VSC9953_CMD */ diff --git a/include/vsc9953.h b/include/vsc9953.h new file mode 100644 index 00000000000..3d11b87a1f5 --- /dev/null +++ b/include/vsc9953.h @@ -0,0 +1,402 @@ +/* + * vsc9953.h + * + * Driver for the Vitesse VSC9953 L2 Switch + * + * This software may be used and distributed according to the + * terms of the GNU Public License, Version 2, incorporated + * herein by reference. + * + * Copyright 2013 Freescale Semiconductor, Inc. + * + */ + +#ifndef _VSC9953_H_ +#define _VSC9953_H_ + +#include +#include +#include +#include + +#define VSC9953_OFFSET (CONFIG_SYS_CCSRBAR_DEFAULT + 0x800000) + +#define VSC9953_SYS_OFFSET 0x010000 +#define VSC9953_DEV_GMII_OFFSET 0x100000 +#define VSC9953_QSYS_OFFSET 0x200000 +#define VSC9953_ANA_OFFSET 0x280000 +#define VSC9953_DEVCPU_GCB 0x070000 +#define VSC9953_ES0 0x040000 +#define VSC9953_IS1 0x050000 +#define VSC9953_IS2 0x060000 + +#define T1040_SWITCH_GMII_DEV_OFFSET 0x010000 +#define VSC9953_PHY_REGS_OFFST 0x0000AC + +#define CONFIG_VSC9953_SOFT_SWC_RST_ENA 0x00000001 +#define CONFIG_VSC9953_CORE_ENABLE 0x80 +#define CONFIG_VSC9953_MEM_ENABLE 0x40 +#define CONFIG_VSC9953_MEM_INIT 0x20 + +#define CONFIG_VSC9953_PORT_ENA 0x00003a00 +#define CONFIG_VSC9953_MAC_ENA_CFG 0x00000011 +#define CONFIG_VSC9953_MAC_MODE_CFG 0x00000011 +#define CONFIG_VSC9953_MAC_IFG_CFG 0x00000515 +#define CONFIG_VSC9953_MAC_HDX_CFG 0x00001043 +#define CONFIG_VSC9953_CLOCK_CFG 0x00000001 +#define CONFIG_VSC9953_CLOCK_CFG_1000M 0x00000001 +#define CONFIG_VSC9953_PFC_FC 0x00000001 +#define CONFIG_VSC9953_PFC_FC_QSGMII 0x00000000 +#define CONFIG_VSC9953_MAC_FC_CFG 0x04700000 +#define CONFIG_VSC9953_MAC_FC_CFG_QSGMII 0x00700000 +#define CONFIG_VSC9953_PAUSE_CFG 0x001ffffe +#define CONFIG_VSC9953_TOT_TAIL_DROP_LVL 0x000003ff +#define CONFIG_VSC9953_FRONT_PORT_MODE 0x00000000 +#define CONFIG_VSC9953_MAC_MAX_LEN 0x000005ee + +#define CONFIG_VSC9953_VCAP_MV_CFG 0x0000ffff +#define CONFIG_VSC9953_VCAP_UPDATE_CTRL 0x01000004 +#define VSC9953_MAX_PORTS 10 +#define VSC9953_PORT_CHECK(port) \ + (((port) < 0 || (port) >= VSC9953_MAX_PORTS) ? 0 : 1) +#define VSC9953_INTERNAL_PORT_CHECK(port) ( \ + ( \ + (port) < VSC9953_MAX_PORTS - 2 || (port) >= VSC9953_MAX_PORTS \ + ) ? 0 : 1 \ +) + +#define DEFAULT_VSC9953_MDIO_NAME "VSC9953_MDIO0" + +#define MIIMIND_OPR_PEND 0x00000004 + +struct vsc9953_mdio_info { + struct vsc9953_mii_mng *regs; + char *name; +}; + +/* VSC9953 ANA structure for T1040 U-boot*/ + +struct vsc9953_ana_port { + u32 vlan_cfg; + u32 drop_cfg; + u32 qos_cfg; + u32 vcap_cfg; + u32 vcap_s1_key_cfg[3]; + u32 vcap_s2_cfg; + u32 qos_pcp_dei_map_cfg[16]; + u32 cpu_fwd_cfg; + u32 cpu_fwd_bpdu_cfg; + u32 cpu_fwd_garp_cfg; + u32 cpu_fwd_ccm_cfg; + u32 port_cfg; + u32 pol_cfg; + u32 reserved[34]; +}; + +struct vsc9953_ana_pol { + u32 pol_pir_cfg; + u32 pol_cir_cfg; + u32 pol_mode_cfg; + u32 pol_pir_state; + u32 pol_cir_state; + u32 reserved1[3]; +}; + +struct vsc9953_ana_ana_tables { + u32 entry_lim[11]; + u32 an_moved; + u32 mach_data; + u32 macl_data; + u32 mac_access; + u32 mact_indx; + u32 vlan_access; + u32 vlan_tidx; +}; + +struct vsc9953_ana_ana { + u32 adv_learn; + u32 vlan_mask; + u32 anag_efil; + u32 an_events; + u32 storm_limit_burst; + u32 storm_limit_cfg[4]; + u32 isolated_prts; + u32 community_ports; + u32 auto_age; + u32 mac_options; + u32 learn_disc; + u32 agen_ctrl; + u32 mirror_ports; + u32 emirror_ports; + u32 flooding; + u32 flooding_ipmc; + u32 sflow_cfg[11]; + u32 port_mode[12]; +}; + +struct vsc9953_ana_pgid { + u32 port_grp_id[91]; +}; + +struct vsc9953_ana_pfc { + u32 pfc_cfg; + u32 reserved1[15]; +}; + +struct vsc9953_ana_pol_misc { + u32 pol_flowc[10]; + u32 reserved1[17]; + u32 pol_hyst; +}; + +struct vsc9953_ana_common { + u32 aggr_cfg; + u32 cpuq_cfg; + u32 cpuq_8021_cfg; + u32 dscp_cfg; + u32 dscp_rewr_cfg; + u32 vcap_rng_type_cfg; + u32 vcap_rng_val_cfg; + u32 discard_cfg; + u32 fid_cfg; +}; + +struct vsc9953_analyzer { + struct vsc9953_ana_port port[11]; + u32 reserved1[9536]; + struct vsc9953_ana_pol pol[164]; + struct vsc9953_ana_ana_tables ana_tables; + u32 reserved2[14]; + struct vsc9953_ana_ana ana; + u32 reserved3[22]; + struct vsc9953_ana_pgid port_id_tbl; + u32 reserved4[549]; + struct vsc9953_ana_pfc pfc[10]; + struct vsc9953_ana_pol_misc pol_misc; + u32 reserved5[196]; + struct vsc9953_ana_common common; +}; +/* END VSC9953 ANA structure for T1040 U-boot*/ + +/* VSC9953 DEV_GMII structure for T1040 U-boot*/ + +struct vsc9953_dev_gmii_port_mode { + u32 clock_cfg; + u32 port_misc; + u32 reserved1; + u32 eee_cfg; +}; + +struct vsc9953_dev_gmii_mac_cfg_status { + u32 mac_ena_cfg; + u32 mac_mode_cfg; + u32 mac_maxlen_cfg; + u32 mac_tags_cfg; + u32 mac_adv_chk_cfg; + u32 mac_ifg_cfg; + u32 mac_hdx_cfg; + u32 mac_fc_mac_low_cfg; + u32 mac_fc_mac_high_cfg; + u32 mac_sticky; +}; + +struct vsc9953_dev_gmii { + struct vsc9953_dev_gmii_port_mode port_mode; + struct vsc9953_dev_gmii_mac_cfg_status mac_cfg_status; +}; + +/* END VSC9953 DEV_GMII structure for T1040 U-boot*/ + +/* VSC9953 QSYS structure for T1040 U-boot*/ + +struct vsc9953_qsys_hsch { + u32 cir_cfg; + u32 reserved1; + u32 se_cfg; + u32 se_dwrr_cfg[8]; + u32 cir_state; + u32 reserved2[20]; +}; + +struct vsc9953_qsys_sys { + u32 port_mode[12]; + u32 switch_port_mode[11]; + u32 stat_cnt_cfg; + u32 eee_cfg[10]; + u32 eee_thrs; + u32 igr_no_sharing; + u32 egr_no_sharing; + u32 sw_status[11]; + u32 ext_cpu_cfg; + u32 cpu_group_map; + u32 reserved1[23]; +}; + +struct vsc9953_qsys_qos_cfg { + u32 red_profile[16]; + u32 res_qos_mode; +}; + +struct vsc9953_qsys_drop_cfg { + u32 egr_drop_mode; +}; + +struct vsc9953_qsys_mmgt { + u32 eq_cntrl; + u32 reserved1; +}; + +struct vsc9953_qsys_hsch_misc { + u32 hsch_misc_cfg; + u32 reserved1[546]; +}; + +struct vsc9953_qsys_res_ctrl { + u32 res_cfg; + u32 res_stat; + +}; + +struct vsc9953_qsys_reg { + struct vsc9953_qsys_hsch hsch[108]; + struct vsc9953_qsys_sys sys; + struct vsc9953_qsys_qos_cfg qos_cfg; + struct vsc9953_qsys_drop_cfg drop_cfg; + struct vsc9953_qsys_mmgt mmgt; + struct vsc9953_qsys_hsch_misc hsch_misc; + struct vsc9953_qsys_res_ctrl res_ctrl[1024]; +}; + +/* END VSC9953 QSYS structure for T1040 U-boot*/ + +/* VSC9953 SYS structure for T1040 U-boot*/ + +struct vsc9953_sys_stat { + u32 rx_cntrs[64]; + u32 tx_cntrs[64]; + u32 drop_cntrs[64]; + u32 reserved1[6]; +}; + +struct vsc9953_sys_sys { + u32 reset_cfg; + u32 reserved1; + u32 vlan_etype_cfg; + u32 port_mode[12]; + u32 front_port_mode[10]; + u32 frame_aging; + u32 stat_cfg; + u32 reserved2[50]; +}; + +struct vsc9953_sys_pause_cfg { + u32 pause_cfg[11]; + u32 pause_tot_cfg; + u32 tail_drop_level[11]; + u32 tot_tail_drop_lvl; + u32 mac_fc_cfg[10]; +}; + +struct vsc9953_sys_mmgt { + u16 free_cnt; +}; + +struct vsc9953_system_reg { + struct vsc9953_sys_stat stat; + struct vsc9953_sys_sys sys; + struct vsc9953_sys_pause_cfg pause_cfg; + struct vsc9953_sys_mmgt mmgt; +}; + +/* END VSC9953 SYS structure for T1040 U-boot*/ + + +/* VSC9953 DEVCPU_GCB structure for T1040 U-boot*/ + +struct vsc9953_chip_regs { + u32 chipd_id; + u32 gpr; + u32 soft_rst; +}; + +struct vsc9953_gpio { + u32 gpio_out_set[10]; + u32 gpio_out_clr[10]; + u32 gpio_out[10]; + u32 gpio_in[10]; +}; + +struct vsc9953_mii_mng { + u32 miimstatus; + u32 reserved1; + u32 miimcmd; + u32 miimdata; + u32 miimcfg; + u32 miimscan_0; + u32 miimscan_1; + u32 miiscan_lst_rslts; + u32 miiscan_lst_rslts_valid; +}; + +struct vsc9953_mii_read_scan { + u32 mii_scan_results_sticky[2]; +}; + +struct vsc9953_devcpu_gcb { + struct vsc9953_chip_regs chip_regs; + struct vsc9953_gpio gpio; + struct vsc9953_mii_mng mii_mng[2]; + struct vsc9953_mii_read_scan mii_read_scan; +}; + +/* END VSC9953 DEVCPU_GCB structure for T1040 U-boot*/ + +/* VSC9953 IS* structure for T1040 U-boot*/ + +struct vsc9953_vcap_core_cfg { + u32 vcap_update_ctrl; + u32 vcap_mv_cfg; +}; + +struct vsc9953_vcap { +struct vsc9953_vcap_core_cfg vcap_core_cfg; +}; + +/* END VSC9953 IS* structure for T1040 U-boot*/ + +#define VSC9953_PORT_INFO_INITIALIZER(idx) \ +{ \ + .enabled = 0, \ + .phyaddr = 0, \ + .index = idx, \ + .phy_regs = NULL, \ + .enet_if = PHY_INTERFACE_MODE_NONE, \ + .bus = NULL, \ + .phydev = NULL, \ +} + +/* Structure to describe a VSC9953 port */ +struct vsc9953_port_info { + u8 enabled; + u8 phyaddr; + int index; + void *phy_regs; + phy_interface_t enet_if; + struct mii_dev *bus; + struct phy_device *phydev; +}; + +/* Structure to describe a VSC9953 switch */ +struct vsc9953_info { + struct vsc9953_port_info port[VSC9953_MAX_PORTS]; +}; + +void vsc9953_init(bd_t *bis); + +void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus); +void vsc9953_port_info_set_phy_address(int port, int address); +void vsc9953_port_enable(int port); +void vsc9953_port_disable(int port); +void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int); + +#endif /* _VSC9953_H_ */ -- cgit v1.3.1 From a83fccc2c979263ba88a6801130258124caca51a Mon Sep 17 00:00:00 2001 From: Codrin Ciubotariu Date: Wed, 21 Jan 2015 11:54:11 +0200 Subject: board/T1040qds: Add VSC9953 support for T1040qds board This patch configures and initializes the L2 switch on T1040QDS board. The L2 switch ports must be initialized according to the SerDes protocols. Signed-off-by: Codrin Ciubotariu --- board/freescale/t1040qds/eth.c | 91 ++++++++++++++++++++++++++++++++++++++++++ include/configs/T1040QDS.h | 6 +++ 2 files changed, 97 insertions(+) (limited to 'include') diff --git a/board/freescale/t1040qds/eth.c b/board/freescale/t1040qds/eth.c index 2f8e7536315..8c8293426bb 100644 --- a/board/freescale/t1040qds/eth.c +++ b/board/freescale/t1040qds/eth.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "../common/fman.h" #include "../common/qixis.h" @@ -439,6 +440,12 @@ int board_eth_init(bd_t *bis) #ifdef CONFIG_FMAN_ENET struct memac_mdio_info memac_mdio_info; unsigned int i; +#ifdef CONFIG_VSC9953 + int lane; + int phy_addr; + phy_interface_t phy_int; + struct mii_dev *bus; +#endif printf("Initializing Fman\n"); set_brdcfg9_for_gtx_clk(); @@ -493,6 +500,90 @@ int board_eth_init(bd_t *bis) } } +#ifdef CONFIG_VSC9953 + for (i = 0; i < VSC9953_MAX_PORTS; i++) { + lane = -1; + phy_addr = 0; + phy_int = PHY_INTERFACE_MODE_NONE; + switch (i) { + case 0: + case 1: + case 2: + case 3: + lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A); + /* PHYs connected over QSGMII */ + if (lane >= 0) { + phy_addr = CONFIG_SYS_FM1_QSGMII21_PHY_ADDR + + i; + phy_int = PHY_INTERFACE_MODE_QSGMII; + break; + } + lane = serdes_get_first_lane(FSL_SRDS_1, + SGMII_SW1_MAC1 + i); + + if (lane < 0) + break; + + /* PHYs connected over QSGMII */ + if (i != 3 || lane_to_slot[lane] == 7) + phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR + + i; + else + phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR; + phy_int = PHY_INTERFACE_MODE_SGMII; + break; + case 4: + case 5: + case 6: + case 7: + lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B); + /* PHYs connected over QSGMII */ + if (lane >= 0) { + phy_addr = CONFIG_SYS_FM1_QSGMII11_PHY_ADDR + + i - 4; + phy_int = PHY_INTERFACE_MODE_QSGMII; + break; + } + lane = serdes_get_first_lane(FSL_SRDS_1, + SGMII_SW1_MAC1 + i); + /* PHYs connected over SGMII */ + if (lane >= 0) { + phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR + + i - 3; + phy_int = PHY_INTERFACE_MODE_SGMII; + } + break; + case 8: + if (serdes_get_first_lane(FSL_SRDS_1, + SGMII_FM1_DTSEC1) < 0) + /* FM1@DTSEC1 is connected to SW1@PORT8 */ + vsc9953_port_enable(i); + break; + case 9: + if (serdes_get_first_lane(FSL_SRDS_1, + SGMII_FM1_DTSEC2) < 0) { + /* Enable L2 On MAC2 using SCFG */ + struct ccsr_scfg *scfg = (struct ccsr_scfg *) + CONFIG_SYS_MPC85xx_SCFG; + + out_be32(&scfg->esgmiiselcr, + in_be32(&scfg->esgmiiselcr) | + (0x80000000)); + vsc9953_port_enable(i); + } + break; + } + + if (lane >= 0) { + bus = mii_dev_for_muxval(lane_to_slot[lane]); + vsc9953_port_info_set_mdio(i, bus); + vsc9953_port_enable(i); + } + vsc9953_port_info_set_phy_address(i, phy_addr); + vsc9953_port_info_set_phy_int(i, phy_int); + } + +#endif cpu_eth_init(bis); #endif diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 5ebc8709aa1..92f5f56718c 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -692,6 +692,12 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ #endif +/* Enable VSC9953 L2 Switch driver */ +#define CONFIG_VSC9953 +#define CONFIG_VSC9953_CMD +#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x14 +#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x18 + /* * Dynamic MTD Partition support with mtdparts */ -- cgit v1.3.1 From db4a1767c09a4696792204d1cac33631cb38424e Mon Sep 17 00:00:00 2001 From: Codrin Ciubotariu Date: Wed, 21 Jan 2015 11:54:12 +0200 Subject: board/T1040rdb: Add VSC9953 support for T1040rdb board This patch configures and initializes the L2 switch on T1040rdb board. The external L2 switch ports may be connected to PHYs only over QSGMII, for T1040rdb. Signed-off-by: Codrin Ciubotariu --- board/freescale/t104xrdb/eth.c | 50 ++++++++++++++++++++++++++++++++++++++++++ include/configs/T104xRDB.h | 8 +++++++ 2 files changed, 58 insertions(+) (limited to 'include') diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c index f5c0ec80755..7581a4cdd44 100644 --- a/board/freescale/t104xrdb/eth.c +++ b/board/freescale/t104xrdb/eth.c @@ -6,11 +6,13 @@ #include #include +#include #include #include #include #include #include +#include #include "../common/fman.h" @@ -20,6 +22,11 @@ int board_eth_init(bd_t *bis) struct memac_mdio_info memac_mdio_info; unsigned int i; int phy_addr = 0; +#ifdef CONFIG_VSC9953 + phy_interface_t phy_int; + struct mii_dev *bus; +#endif + printf("Initializing Fman\n"); memac_mdio_info.regs = @@ -81,6 +88,49 @@ int board_eth_init(bd_t *bis) DEFAULT_FM_MDIO_NAME)); } +#ifdef CONFIG_VSC9953 + /* SerDes configured for QSGMII */ + if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A) >= 0) { + for (i = 0; i < 4; i++) { + bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); + phy_addr = CONFIG_SYS_FM1_QSGMII11_PHY_ADDR + i; + phy_int = PHY_INTERFACE_MODE_QSGMII; + + vsc9953_port_info_set_mdio(i, bus); + vsc9953_port_info_set_phy_address(i, phy_addr); + vsc9953_port_info_set_phy_int(i, phy_int); + vsc9953_port_enable(i); + } + } + if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B) >= 0) { + for (i = 4; i < 8; i++) { + bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); + phy_addr = CONFIG_SYS_FM1_QSGMII21_PHY_ADDR + i - 4; + phy_int = PHY_INTERFACE_MODE_QSGMII; + + vsc9953_port_info_set_mdio(i, bus); + vsc9953_port_info_set_phy_address(i, phy_addr); + vsc9953_port_info_set_phy_int(i, phy_int); + vsc9953_port_enable(i); + } + } + + /* Connect DTSEC1 to L2 switch if it doesn't have a PHY */ + if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1) < 0) + vsc9953_port_enable(8); + + /* Connect DTSEC2 to L2 switch if it doesn't have a PHY */ + if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC2) < 0) { + /* Enable L2 On MAC2 using SCFG */ + struct ccsr_scfg *scfg = (struct ccsr_scfg *) + CONFIG_SYS_MPC85xx_SCFG; + + out_be32(&scfg->esgmiiselcr, in_be32(&scfg->esgmiiselcr) | + (0x80000000)); + vsc9953_port_enable(9); + } +#endif + cpu_eth_init(bis); #endif diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 57cdf7213c4..d47f1be6851 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -726,6 +726,14 @@ #define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 #define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 +/* Enable VSC9953 L2 Switch driver on T1040 SoC */ +#ifdef CONFIG_T1040RDB +#define CONFIG_VSC9953 +#define CONFIG_VSC9953_CMD +#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x04 +#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x08 +#endif + #define CONFIG_MII /* MII PHY management */ #define CONFIG_ETHPRIME "FM1@DTSEC4" #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ -- cgit v1.3.1