From 1dd49f577b75d9d6d1716b133024a31d20748382 Mon Sep 17 00:00:00 2001 From: Patrick Delaunay Date: Wed, 23 Oct 2019 15:44:36 +0200 Subject: pinctrol: dm: remove the function pinctrl_decode_pin_config Remove the pinctrl_decode_pin_config() API, because this function is unused and not compatible with livetree (it uses fdtdec_get_bool instead of ofnode API). Signed-off-by: Patrick Delaunay Reviewed-by: Simon Glass --- include/dm/pinctrl.h | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'include') diff --git a/include/dm/pinctrl.h b/include/dm/pinctrl.h index 3eca34fbf70..692e5fc8cbf 100644 --- a/include/dm/pinctrl.h +++ b/include/dm/pinctrl.h @@ -369,19 +369,6 @@ int pinctrl_request_noflags(struct udevice *dev, int func); */ int pinctrl_get_periph_id(struct udevice *dev, struct udevice *periph); -/** - * pinctrl_decode_pin_config() - decode pin configuration flags - * - * This decodes some of the PIN_CONFIG values into flags, with each value - * being (1 << pin_cfg). This does not support things with values like the - * slew rate. - * - * @blob: Device tree blob - * @node: Node containing the PIN_CONFIG values - * @return decoded flag value, or -ve on error - */ -int pinctrl_decode_pin_config(const void *blob, int node); - /** * pinctrl_get_gpio_mux() - get the mux value for a particular GPIO * -- cgit v1.3.1 From 086336a22508affb7567bf6d383642554eda5a56 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 23 Oct 2019 16:46:38 +0200 Subject: fdtdec: protect against another NULL phandlep in fdtdec_add_reserved_memory() The change adding fdtdec_add_reserved_memory() already protected the added phandle against the phandlep being NULL - making the phandlep var optional. But in the early code checking for an already existing carveout this check was not done and thus the phandle assignment could run into trouble, so add a check there as well, which makes the function still return successfully if a matching region is found, even though no-one wants to work with the phandle. Fixes: c9222a08b3f7 ("fdtdec: Implement fdtdec_add_reserved_memory()") Signed-off-by: Heiko Stuebner Reviewed-by: Simon Glass --- include/fdtdec.h | 1 + lib/fdtdec.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/fdtdec.h b/include/fdtdec.h index f1e58f9732d..e150975b276 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -1061,6 +1061,7 @@ static inline int fdtdec_set_phandle(void *blob, int node, uint32_t phandle) * @param basename base name of the node to create * @param carveout information about the carveout region * @param phandlep return location for the phandle of the carveout region + * can be NULL * @return 0 on success or a negative error code on failure */ int fdtdec_add_reserved_memory(void *blob, const char *basename, diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 125d9dbf263..38a0cff25ee 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -1309,7 +1309,8 @@ int fdtdec_add_reserved_memory(void *blob, const char *basename, } if (addr == carveout->start && (addr + size) == carveout->end) { - *phandlep = fdt_get_phandle(blob, node); + if (phandlep) + *phandlep = fdt_get_phandle(blob, node); return 0; } } -- cgit v1.3.1 From 357d2ceba0354e29462ac25924f5e42623c22b5b Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 23 Oct 2019 16:46:39 +0200 Subject: fdtdec: only create phandle if caller wants it in fdtdec_add_reserved_memory() The phandlep pointer returning the phandle to the caller is optional and if it is not set when calling fdtdec_add_reserved_memory() it is highly likely that the caller is not interested in a phandle to the created reserved-memory area and really just wants that area added. So just don't create a phandle in that case. Signed-off-by: Heiko Stuebner Reviewed-by: Simon Glass --- include/fdtdec.h | 2 +- lib/fdtdec.c | 16 +++++++++------- 2 files changed, 10 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/fdtdec.h b/include/fdtdec.h index e150975b276..696e0fd024d 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -1061,7 +1061,7 @@ static inline int fdtdec_set_phandle(void *blob, int node, uint32_t phandle) * @param basename base name of the node to create * @param carveout information about the carveout region * @param phandlep return location for the phandle of the carveout region - * can be NULL + * can be NULL if no phandle should be added * @return 0 on success or a negative error code on failure */ int fdtdec_add_reserved_memory(void *blob, const char *basename, diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 38a0cff25ee..61af3472e6a 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -1339,13 +1339,15 @@ int fdtdec_add_reserved_memory(void *blob, const char *basename, if (node < 0) return node; - err = fdt_generate_phandle(blob, &phandle); - if (err < 0) - return err; - - err = fdtdec_set_phandle(blob, node, phandle); - if (err < 0) - return err; + if (phandlep) { + err = fdt_generate_phandle(blob, &phandle); + if (err < 0) + return err; + + err = fdtdec_set_phandle(blob, node, phandle); + if (err < 0) + return err; + } /* store one or two address cells */ if (na > 1) -- cgit v1.3.1 From 6ccb05eae01b660b0585accf338302af1069f419 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 23 Oct 2019 16:46:40 +0200 Subject: image: fdt: copy possible optee nodes to a loaded devicetree The loading convention for optee or any other tee on arm64 is as bl32 parameter to the trusted-firmware. So TF-A gets invoked with the TEE as bl32 and main u-boot as bl33. Once it has done its startup TF-A jumps into the bl32 for the TEE startup, returns to TF-A and then jumps to bl33. All of them get passed a devicetree as parameter and all components often get loaded from a FIT image. OP-TEE will create additional nodes in that devicetree namely a firmware node and possibly multiple reserved-memory nodes. While this devicetree is used in main u-boot, in most cases it won't be the one passed to the actual kernel. Instead most boot commands will load a new devicetree from somewhere like mass storage of the network, so if that happens u-boot should transfer the optee nodes to that new devicetree. To make that happen introduce optee_copy_fdt_nodes() called from the dt setup function in image-fdt which after checking for the optee presence in the u-boot dt will make sure a optee node is present in the kernel dt and transfer any reserved-memory regions it can find. Signed-off-by: Heiko Stuebner Reviewed-by: Jens Wiklander --- common/image-fdt.c | 8 +++ include/tee/optee.h | 9 ++++ lib/optee/optee.c | 140 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 157 insertions(+) (limited to 'include') diff --git a/common/image-fdt.c b/common/image-fdt.c index 4247dcee0c4..48388488d98 100644 --- a/common/image-fdt.c +++ b/common/image-fdt.c @@ -17,6 +17,7 @@ #include #include #include +#include #ifndef CONFIG_SYS_FDT_PAD #define CONFIG_SYS_FDT_PAD 0x3000 @@ -561,6 +562,13 @@ int image_setup_libfdt(bootm_headers_t *images, void *blob, } } + fdt_ret = optee_copy_fdt_nodes(gd->fdt_blob, blob); + if (fdt_ret) { + printf("ERROR: transfer of optee nodes to new fdt failed: %s\n", + fdt_strerror(fdt_ret)); + goto err; + } + /* Delete the old LMB reservation */ if (lmb) lmb_free(lmb, (phys_addr_t)(u32)(uintptr_t)blob, diff --git a/include/tee/optee.h b/include/tee/optee.h index 9446928fd48..121b30a3030 100644 --- a/include/tee/optee.h +++ b/include/tee/optee.h @@ -67,4 +67,13 @@ static inline int optee_verify_bootm_image(unsigned long image_addr, } #endif +#if defined(CONFIG_OPTEE) && defined(CONFIG_OF_LIBFDT) +int optee_copy_fdt_nodes(const void *old_blob, void *new_blob); +#else +static inline int optee_copy_fdt_nodes(const void *old_blob, void *new_blob) +{ + return 0; +} +#endif + #endif /* _OPTEE_H */ diff --git a/lib/optee/optee.c b/lib/optee/optee.c index db92cd9af29..c883c498e1d 100644 --- a/lib/optee/optee.c +++ b/lib/optee/optee.c @@ -5,6 +5,8 @@ */ #include +#include +#include #include #define optee_hdr_err_msg \ @@ -63,3 +65,141 @@ error: return ret; } + +#if defined(CONFIG_OF_LIBFDT) +static int optee_copy_firmware_node(const void *old_blob, void *fdt_blob) +{ + int old_offs, offs, ret, len; + const void *prop; + + old_offs = fdt_path_offset(old_blob, "/firmware/optee"); + if (old_offs < 0) { + debug("Original OP-TEE Device Tree node not found"); + return old_offs; + } + + offs = fdt_path_offset(fdt_blob, "/firmware"); + if (offs < 0) { + offs = fdt_path_offset(fdt_blob, "/"); + if (offs < 0) + return offs; + + offs = fdt_add_subnode(fdt_blob, offs, "firmware"); + if (offs < 0) + return offs; + } + + offs = fdt_add_subnode(fdt_blob, offs, "optee"); + if (offs < 0) + return ret; + + /* copy the compatible property */ + prop = fdt_getprop(old_blob, old_offs, "compatible", &len); + if (!prop) { + debug("missing OP-TEE compatible property"); + return -EINVAL; + } + + ret = fdt_setprop(fdt_blob, offs, "compatible", prop, len); + if (ret < 0) + return ret; + + /* copy the method property */ + prop = fdt_getprop(old_blob, old_offs, "method", &len); + if (!prop) { + debug("missing OP-TEE method property"); + return -EINVAL; + } + + ret = fdt_setprop(fdt_blob, offs, "method", prop, len); + if (ret < 0) + return ret; + + return 0; +} + +int optee_copy_fdt_nodes(const void *old_blob, void *new_blob) +{ + int nodeoffset, subnode, ret; + struct fdt_resource res; + + if (fdt_check_header(old_blob)) + return -EINVAL; + + if (fdt_check_header(new_blob)) + return -EINVAL; + + /* only proceed if there is an /firmware/optee node */ + if (fdt_path_offset(old_blob, "/firmware/optee") < 0) { + debug("No OP-TEE firmware node in old fdt, nothing to do"); + return 0; + } + + /* + * Do not proceed if the target dt already has an OP-TEE node. + * In this case assume that the system knows better somehow, + * so do not interfere. + */ + if (fdt_path_offset(new_blob, "/firmware/optee") >= 0) { + debug("OP-TEE Device Tree node already exists in target"); + return 0; + } + + ret = optee_copy_firmware_node(old_blob, new_blob); + if (ret < 0) { + printf("Failed to add OP-TEE firmware node\n"); + return ret; + } + + /* optee inserts its memory regions as reserved-memory nodes */ + nodeoffset = fdt_subnode_offset(old_blob, 0, "reserved-memory"); + if (nodeoffset >= 0) { + subnode = fdt_first_subnode(old_blob, nodeoffset); + while (subnode >= 0) { + const char *name = fdt_get_name(old_blob, + subnode, NULL); + if (!name) + return -EINVAL; + + /* only handle optee reservations */ + if (strncmp(name, "optee", 5)) + continue; + + /* check if this subnode has a reg property */ + ret = fdt_get_resource(old_blob, subnode, "reg", 0, + &res); + if (!ret) { + struct fdt_memory carveout = { + .start = res.start, + .end = res.end, + }; + char *oldname, *nodename, *tmp; + + oldname = strdup(name); + if (!oldname) + return -ENOMEM; + + tmp = oldname; + nodename = strsep(&tmp, "@"); + if (!nodename) { + free(oldname); + return -EINVAL; + } + + ret = fdtdec_add_reserved_memory(new_blob, + nodename, + &carveout, + NULL); + free(oldname); + + if (ret < 0) + return ret; + } + + subnode = fdt_next_subnode(old_blob, subnode); + } + } + + return 0; +} +#endif -- cgit v1.3.1 From 96383bdfe421f01de9c339570de40e9bfd9ef455 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 23 Oct 2019 16:46:41 +0200 Subject: tests: add OP-TEE test suite OP-TEE can get supplied with a devicetree and will then insert its firmware node and reserved-memory sections into it. As this devicetree often is not the one supplied to a later loaded kernel, a previous commit added functionality to transfer these nodes onto that new devicetree. To make sure this functionality stays intact, also add a test for the transfer functionality. Signed-off-by: Heiko Stuebner Reviewed-by: Simon Glass --- Makefile | 1 + include/test/optee.h | 14 ++++ include/test/suites.h | 1 + test/Kconfig | 1 + test/cmd_ut.c | 6 ++ test/optee/Kconfig | 7 ++ test/optee/Makefile | 13 ++++ test/optee/cmd_ut_optee.c | 149 +++++++++++++++++++++++++++++++++++++ test/optee/test-optee-base.dts | 13 ++++ test/optee/test-optee-no-optee.dts | 13 ++++ test/optee/test-optee-optee.dts | 32 ++++++++ 11 files changed, 250 insertions(+) create mode 100644 include/test/optee.h create mode 100644 test/optee/Kconfig create mode 100644 test/optee/Makefile create mode 100644 test/optee/cmd_ut_optee.c create mode 100644 test/optee/test-optee-base.dts create mode 100644 test/optee/test-optee-no-optee.dts create mode 100644 test/optee/test-optee-optee.dts (limited to 'include') diff --git a/Makefile b/Makefile index a9a78c30d67..3e0cbd987e9 100644 --- a/Makefile +++ b/Makefile @@ -751,6 +751,7 @@ libs-$(CONFIG_API) += api/ libs-$(CONFIG_HAS_POST) += post/ libs-$(CONFIG_UNIT_TEST) += test/ test/dm/ libs-$(CONFIG_UT_ENV) += test/env/ +libs-$(CONFIG_UT_OPTEE) += test/optee/ libs-$(CONFIG_UT_OVERLAY) += test/overlay/ libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/) diff --git a/include/test/optee.h b/include/test/optee.h new file mode 100644 index 00000000000..a8c6e6395f5 --- /dev/null +++ b/include/test/optee.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2019, Theobroma Systems Design und Consulting GmbH + */ + +#ifndef __TEST_OPTEE_H__ +#define __TEST_OPTEE_H__ + +#include + +/* Declare a new environment test */ +#define OPTEE_TEST(_name, _flags) UNIT_TEST(_name, _flags, optee_test) + +#endif /* __TEST_OPTEE_H__ */ diff --git a/include/test/suites.h b/include/test/suites.h index 01bee09346c..20970f08d66 100644 --- a/include/test/suites.h +++ b/include/test/suites.h @@ -28,6 +28,7 @@ int do_ut_compression(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]); int do_ut_dm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); int do_ut_env(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); int do_ut_lib(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +int do_ut_optee(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); int do_ut_overlay(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); int do_ut_time(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); int do_ut_unicode(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); diff --git a/test/Kconfig b/test/Kconfig index 48a0e501f88..f53629aac5a 100644 --- a/test/Kconfig +++ b/test/Kconfig @@ -33,4 +33,5 @@ config UT_UNICODE source "test/dm/Kconfig" source "test/env/Kconfig" +source "test/optee/Kconfig" source "test/overlay/Kconfig" diff --git a/test/cmd_ut.c b/test/cmd_ut.c index e3b89504e77..2781f8bd566 100644 --- a/test/cmd_ut.c +++ b/test/cmd_ut.c @@ -43,6 +43,9 @@ static cmd_tbl_t cmd_ut_sub[] = { #if defined(CONFIG_UT_ENV) U_BOOT_CMD_MKENT(env, CONFIG_SYS_MAXARGS, 1, do_ut_env, "", ""), #endif +#ifdef CONFIG_UT_OPTEE + U_BOOT_CMD_MKENT(optee, CONFIG_SYS_MAXARGS, 1, do_ut_optee, "", ""), +#endif #ifdef CONFIG_UT_OVERLAY U_BOOT_CMD_MKENT(overlay, CONFIG_SYS_MAXARGS, 1, do_ut_overlay, "", ""), #endif @@ -114,6 +117,9 @@ static char ut_help_text[] = #ifdef CONFIG_UT_LIB "ut lib [test-name] - test library functions\n" #endif +#ifdef CONFIG_UT_OPTEE + "ut optee [test-name]\n" +#endif #ifdef CONFIG_UT_OVERLAY "ut overlay [test-name]\n" #endif diff --git a/test/optee/Kconfig b/test/optee/Kconfig new file mode 100644 index 00000000000..2f6834aa3b4 --- /dev/null +++ b/test/optee/Kconfig @@ -0,0 +1,7 @@ +config UT_OPTEE + bool "Enable OP-TEE Unit Tests" + depends on UNIT_TEST && OF_CONTROL && OPTEE + default y + help + This enables the 'ut optee' command which runs a series of unit + tests on the optee library code.. diff --git a/test/optee/Makefile b/test/optee/Makefile new file mode 100644 index 00000000000..8793fd7ad61 --- /dev/null +++ b/test/optee/Makefile @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2019, Theobroma Systems Design und Consulting GmbH + +# Test files +obj-y += cmd_ut_optee.o + +DTC_FLAGS += -@ + +# DT overlays +obj-y += test-optee-base.dtb.o +obj-y += test-optee-optee.dtb.o +obj-y += test-optee-no-optee.dtb.o diff --git a/test/optee/cmd_ut_optee.c b/test/optee/cmd_ut_optee.c new file mode 100644 index 00000000000..670682f3d41 --- /dev/null +++ b/test/optee/cmd_ut_optee.c @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019, Theobroma Systems Design und Consulting GmbH + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +/* 4k ought to be enough for anybody */ +#define FDT_COPY_SIZE (4 * SZ_1K) + +extern u32 __dtb_test_optee_base_begin; +extern u32 __dtb_test_optee_optee_begin; +extern u32 __dtb_test_optee_no_optee_begin; + +static void *fdt; +static bool expect_success; + +static int optee_fdt_firmware(struct unit_test_state *uts) +{ + const void *prop; + int offs, len; + + offs = fdt_path_offset(fdt, "/firmware/optee"); + ut_assert(expect_success ? offs >= 0 : offs < 0); + + /* only continue if we have an optee node */ + if (offs < 0) + return CMD_RET_SUCCESS; + + prop = fdt_getprop(fdt, offs, "compatible", &len); + ut_assertok(strncmp((const char *)prop, "linaro,optee-tz", len)); + + prop = fdt_getprop(fdt, offs, "method", &len); + ut_assert(strncmp(prop, "hvc", 3) == 0 || strncmp(prop, "smc", 3) == 0); + + return CMD_RET_SUCCESS; +} +OPTEE_TEST(optee_fdt_firmware, 0); + +static int optee_fdt_protected_memory(struct unit_test_state *uts) +{ + int offs, subnode; + bool found; + + offs = fdt_path_offset(fdt, "/firmware/optee"); + ut_assert(expect_success ? offs >= 0 : offs < 0); + + /* only continue if we have an optee node */ + if (offs < 0) + return CMD_RET_SUCCESS; + + /* optee inserts its memory regions as reserved-memory nodes */ + offs = fdt_subnode_offset(fdt, 0, "reserved-memory"); + ut_assert(offs >= 0); + + subnode = fdt_first_subnode(fdt, offs); + ut_assert(subnode); + + found = 0; + while (subnode >= 0) { + const char *name = fdt_get_name(fdt, subnode, NULL); + struct fdt_resource res; + + ut_assert(name); + + /* only handle optee reservations */ + if (strncmp(name, "optee", 5)) + continue; + + found = true; + + /* check if this subnode has a reg property */ + ut_assertok(fdt_get_resource(fdt, subnode, "reg", 0, &res)); + subnode = fdt_next_subnode(fdt, subnode); + } + + ut_assert(found); + + return CMD_RET_SUCCESS; +} +OPTEE_TEST(optee_fdt_protected_memory, 0); + +int do_ut_optee(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + struct unit_test *tests = ll_entry_start(struct unit_test, + optee_test); + const int n_ents = ll_entry_count(struct unit_test, optee_test); + struct unit_test_state *uts; + void *fdt_optee = &__dtb_test_optee_optee_begin; + void *fdt_no_optee = &__dtb_test_optee_no_optee_begin; + void *fdt_base = &__dtb_test_optee_base_begin; + int ret = -ENOMEM; + + uts = calloc(1, sizeof(*uts)); + if (!uts) + return -ENOMEM; + + ut_assertok(fdt_check_header(fdt_base)); + ut_assertok(fdt_check_header(fdt_optee)); + ut_assertok(fdt_check_header(fdt_no_optee)); + + fdt = malloc(FDT_COPY_SIZE); + if (!fdt) + return ret; + + /* + * Resize the FDT to 4k so that we have room to operate on + * + * (and relocate it since the memory might be mapped + * read-only) + */ + ut_assertok(fdt_open_into(fdt_base, fdt, FDT_COPY_SIZE)); + + /* + * (1) Try to copy optee nodes from empty dt. + * This should still run successfully. + */ + ut_assertok(optee_copy_fdt_nodes(fdt_no_optee, fdt)); + + expect_success = false; + ret = cmd_ut_category("optee", tests, n_ents, argc, argv); + + /* (2) Try to copy optee nodes from prefilled dt */ + ut_assertok(optee_copy_fdt_nodes(fdt_optee, fdt)); + + expect_success = true; + ret = cmd_ut_category("optee", tests, n_ents, argc, argv); + + /* (3) Try to copy OP-TEE nodes into a already filled DT */ + ut_assertok(fdt_open_into(fdt_optee, fdt, FDT_COPY_SIZE)); + ut_assertok(optee_copy_fdt_nodes(fdt_optee, fdt)); + + expect_success = true; + ret = cmd_ut_category("optee", tests, n_ents, argc, argv); + + free(fdt); + return ret; +} diff --git a/test/optee/test-optee-base.dts b/test/optee/test-optee-base.dts new file mode 100644 index 00000000000..3c1d0c60efe --- /dev/null +++ b/test/optee/test-optee-base.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019, Theobroma Systems Design und Consulting GmbH + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <2>; +}; + + diff --git a/test/optee/test-optee-no-optee.dts b/test/optee/test-optee-no-optee.dts new file mode 100644 index 00000000000..3c1d0c60efe --- /dev/null +++ b/test/optee/test-optee-no-optee.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019, Theobroma Systems Design und Consulting GmbH + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <2>; +}; + + diff --git a/test/optee/test-optee-optee.dts b/test/optee/test-optee-optee.dts new file mode 100644 index 00000000000..11e26a27286 --- /dev/null +++ b/test/optee/test-optee-optee.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019, Theobroma Systems Design und Consulting GmbH + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <2>; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + optee_shm@32000000 { + reg = <0x00 0x32000000 0x00 0x400000>; + }; + + optee_core@30000000 { + reg = <0x00 0x30000000 0x00 0x2000000>; + }; + }; +}; -- cgit v1.3.1