From c7ae3dfdccc171543804d6577ee41ab03e7a09bc Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Mon, 7 Nov 2016 08:47:08 -0700 Subject: efi: Add support for a hello world test program It is useful to have a basic sanity check for EFI loader support. Add a 'bootefi hello' command which loads HelloWord.efi and runs it under U-Boot. Signed-off-by: Simon Glass [agraf: Fix documentation, add unfulfilled kconfig dep] Signed-off-by: Alexander Graf --- scripts/Makefile.lib | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'scripts') diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 45a0e1d486c..956a8a9b044 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -321,6 +321,39 @@ cmd_S_ttf= \ $(obj)/%.S: $(src)/%.ttf $(call cmd,S_ttf) +# EFI Hello World application +# --------------------------------------------------------------------------- + +# Generate an assembly file to wrap the EFI app +cmd_S_efi= \ +( \ + echo '.section .rodata.efi.init,"a"'; \ + echo '.balign 16'; \ + echo '.global __efi_hello_world_begin'; \ + echo '__efi_hello_world_begin:'; \ + echo '.incbin "$<" '; \ + echo '__efi_hello_world_end:'; \ + echo '.global __efi_hello_world_end'; \ + echo '.balign 16'; \ +) > $@ + +$(obj)/%_efi.S: $(obj)/%.efi + $(call cmd,S_efi) + +$(obj)/%.efi: $(obj)/%.so + $(OBJCOPY) -j .header -j .text -j .sdata -j .data -j .dynamic \ + -j .dynsym -j .rel* -j .rela* -j .reloc \ + $(if $(EFI_TARGET),$(EFI_TARGET),-O binary) $^ $@ + +EFI_LDS_PATH = $(srctree)/arch/$(ARCH)/lib/$(EFI_LDS) + +$(obj)/helloworld.so: $(EFI_LDS_PATH) + +$(obj)/helloworld.so: $(obj)/helloworld.o arch/$(ARCH)/lib/$(EFI_CRT0) \ + arch/$(ARCH)/lib/$(EFI_RELOC) + $(LD) -nostdlib -znocombreloc -T $(EFI_LDS_PATH) -shared -Bsymbolic \ + $^ -o $@ + # ACPI # --------------------------------------------------------------------------- quiet_cmd_acpi_c_asl= ASL $< -- cgit v1.3.1 From 3b6460809c2a28360029c1c48247648fac4455c9 Mon Sep 17 00:00:00 2001 From: Mike Looijmans Date: Tue, 20 Sep 2016 11:37:24 +0200 Subject: tools: mkimage: Add support for initialization table for Zynq and ZynqMP The Zynq/ZynqMP boot.bin file contains a region for register initialization data. Filling in proper values in this table can reduce boot time (e.g. about 50ms faster on QSPI boot) and also reduce the size of the SPL binary. The table is a simple text file with register+data on each line. Other lines are simply skipped. The file can be passed to mkimage using the "-R" parameter. It is recommended to add reg init file to board folder. For example: CONFIG_BOOT_INIT_FILE="board/xilinx/zynqmp/xilinx_zynqmp_zcu102/reg.int Signed-off-by: Mike Looijmans Signed-off-by: Michal Simek --- arch/arm/cpu/armv8/zynqmp/Kconfig | 7 +++++++ arch/arm/mach-zynq/Kconfig | 7 +++++++ scripts/Makefile.spl | 4 ++-- tools/zynqimage.c | 28 ++++++++++++++++++++++++++++ tools/zynqmpimage.c | 28 ++++++++++++++++++++++++++++ 5 files changed, 72 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig b/arch/arm/cpu/armv8/zynqmp/Kconfig index 1eedb39aa5a..a3baae4f740 100644 --- a/arch/arm/cpu/armv8/zynqmp/Kconfig +++ b/arch/arm/cpu/armv8/zynqmp/Kconfig @@ -41,6 +41,13 @@ config SYS_CONFIG_NAME Based on this option include/configs/.h header will be used for board configuration. +config BOOT_INIT_FILE + string "boot.bin init register filename" + default "" + help + Add register writes to boot.bin format (max 256 pairs). + Expect a table of register-value pairs, e.g. "0x12345678 0x4321" + config ZYNQMP_USB bool "Configure ZynqMP USB" diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index a1175eea6eb..44e16af863d 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -44,4 +44,11 @@ config SYS_CONFIG_NAME config SYS_MALLOC_F_LEN default 0x600 +config BOOT_INIT_FILE + string "boot.bin init register filename" + default "" + help + Add register writes to boot.bin format (max 256 pairs). + Expect a table of register-value pairs, e.g. "0x12345678 0x4321" + endif diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index e0b0117dc9b..03a2f061a46 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -146,10 +146,10 @@ boot.bin: $(obj)/u-boot-spl.bin FORCE $(call if_changed,mkimage) else ifdef CONFIG_ARCH_ZYNQ -MKIMAGEFLAGS_boot.bin = -T zynqimage +MKIMAGEFLAGS_boot.bin = -T zynqimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE) endif ifdef CONFIG_ARCH_ZYNQMP -MKIMAGEFLAGS_boot.bin = -T zynqmpimage +MKIMAGEFLAGS_boot.bin = -T zynqmpimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE) endif spl/boot.bin: $(obj)/u-boot-spl.bin FORCE diff --git a/tools/zynqimage.c b/tools/zynqimage.c index c43bd5d4882..43876e7a302 100644 --- a/tools/zynqimage.c +++ b/tools/zynqimage.c @@ -222,6 +222,30 @@ static int zynqimage_check_image_types(uint8_t type) return EXIT_FAILURE; } +static void zynqimage_parse_initparams(struct zynq_header *zynqhdr, + const char *filename) +{ + /* Expect a table of register-value pairs, e.g. "0x12345678 0x4321" */ + FILE *fp = fopen(filename, "r"); + struct zynq_reginit reginit; + unsigned int reg_count = 0; + int r; + + if (!fp) { + fprintf(stderr, "Cannot open initparams file: %s\n", filename); + exit(1); + } + do { + r = fscanf(fp, "%x %x", ®init.address, ®init.data); + if (r == 2) { + zynqhdr->register_init[reg_count] = reginit; + ++reg_count; + } + r = fscanf(fp, "%*[^\n]\n"); /* Skip to next line */ + } while ((r != EOF) && (reg_count < HEADER_REGINITS)); + fclose(fp); +} + static void zynqimage_set_header(void *ptr, struct stat *sbuf, int ifd, struct image_tool_params *params) { @@ -237,6 +261,10 @@ static void zynqimage_set_header(void *ptr, struct stat *sbuf, int ifd, if (params->eflag) zynqhdr->image_load = cpu_to_le32((uint32_t)params->ep); + /* User can pass in text file with init list */ + if (strlen(params->imagename2)) + zynqimage_parse_initparams(zynqhdr, params->imagename2); + zynqhdr->checksum = zynqimage_checksum(zynqhdr); } diff --git a/tools/zynqmpimage.c b/tools/zynqmpimage.c index 3f28eb401d9..d08144c2bdf 100644 --- a/tools/zynqmpimage.c +++ b/tools/zynqmpimage.c @@ -234,6 +234,30 @@ static int zynqmpimage_check_image_types(uint8_t type) return EXIT_FAILURE; } +static void zynqmpimage_parse_initparams(struct zynqmp_header *zynqhdr, + const char *filename) +{ + /* Expect a table of register-value pairs, e.g. "0x12345678 0x4321" */ + FILE *fp = fopen(filename, "r"); + struct zynqmp_reginit reginit; + unsigned int reg_count = 0; + int r; + + if (!fp) { + fprintf(stderr, "Cannot open initparams file: %s\n", filename); + exit(1); + } + do { + r = fscanf(fp, "%x %x", ®init.address, ®init.data); + if (r == 2) { + zynqhdr->register_init[reg_count] = reginit; + ++reg_count; + } + r = fscanf(fp, "%*[^\n]\n"); /* Skip to next line */ + } while ((r != EOF) && (reg_count < HEADER_REGINITS)); + fclose(fp); +} + static void zynqmpimage_set_header(void *ptr, struct stat *sbuf, int ifd, struct image_tool_params *params) { @@ -250,6 +274,10 @@ static void zynqmpimage_set_header(void *ptr, struct stat *sbuf, int ifd, if (params->eflag) zynqhdr->image_load = cpu_to_le32((uint32_t)params->ep); + /* User can pass in text file with init list */ + if (strlen(params->imagename2)) + zynqmpimage_parse_initparams(zynqhdr, params->imagename2); + zynqhdr->checksum = zynqmpimage_checksum(zynqhdr); } -- cgit v1.3.1 From 38fed8abe7d2e7ba90deb352d0e7aed4364c5236 Mon Sep 17 00:00:00 2001 From: Semen Protsenko Date: Wed, 16 Nov 2016 19:19:05 +0200 Subject: spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig Signed-off-by: Sam Protsenko [trini: Fix sniper and kc1 migration] Signed-off-by: Tom Rini --- README | 5 ++-- common/spl/Kconfig | 27 ++++++++++++++++++++++ common/spl/spl_mmc.c | 4 ++-- configs/brppt1_mmc_defconfig | 2 ++ configs/brppt1_nand_defconfig | 2 ++ configs/brppt1_spi_defconfig | 2 ++ configs/brxre1_defconfig | 2 ++ configs/clearfog_defconfig | 1 + configs/cm_fx6_defconfig | 1 + configs/cm_t43_defconfig | 2 ++ configs/cm_t54_defconfig | 1 + configs/draco_defconfig | 2 ++ configs/etamin_defconfig | 2 ++ configs/kc1_defconfig | 1 + configs/ls1021aqds_nand_defconfig | 2 ++ configs/ls1021aqds_sdcard_ifc_defconfig | 2 ++ configs/ls1021aqds_sdcard_qspi_defconfig | 2 ++ .../ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 2 ++ configs/ls1021atwr_sdcard_ifc_defconfig | 2 ++ configs/ls1021atwr_sdcard_qspi_defconfig | 2 ++ configs/ls1043aqds_nand_defconfig | 2 ++ configs/ls1043aqds_sdcard_ifc_defconfig | 2 ++ configs/ls1043aqds_sdcard_qspi_defconfig | 2 ++ configs/ls1043ardb_nand_defconfig | 2 ++ configs/ls1043ardb_sdcard_defconfig | 2 ++ configs/ls1046aqds_nand_defconfig | 2 ++ configs/ls1046aqds_sdcard_ifc_defconfig | 2 ++ configs/ls1046aqds_sdcard_qspi_defconfig | 2 ++ configs/ls1046ardb_emmc_defconfig | 2 ++ configs/ls1046ardb_sdcard_defconfig | 2 ++ configs/pxm2_defconfig | 2 ++ configs/rastaban_defconfig | 2 ++ configs/rut_defconfig | 2 ++ configs/sniper_defconfig | 1 + configs/thuban_defconfig | 2 ++ configs/ti814x_evm_defconfig | 2 ++ configs/ti816x_evm_defconfig | 2 ++ configs/woodburn_sd_defconfig | 2 ++ include/configs/am3517_crane.h | 1 - include/configs/am3517_evm.h | 1 - include/configs/at91sam9m10g45ek.h | 1 - include/configs/at91sam9n12ek.h | 1 - include/configs/at91sam9x5ek.h | 1 - include/configs/brppt1.h | 1 - include/configs/brxre1.h | 1 - include/configs/clearfog.h | 2 -- include/configs/cm_fx6.h | 2 -- include/configs/cm_t35.h | 1 - include/configs/cm_t43.h | 2 -- include/configs/cm_t54.h | 2 -- include/configs/da850evm.h | 1 - include/configs/db-88f6820-gp.h | 1 - include/configs/imx6_spl.h | 1 - include/configs/ls1021aqds.h | 1 - include/configs/ls1021atwr.h | 1 - include/configs/ls1043a_common.h | 1 - include/configs/ls1046a_common.h | 1 - include/configs/mcx.h | 1 - include/configs/omap3_evm.h | 1 - include/configs/picosam9g45.h | 1 - include/configs/rk3288_common.h | 1 - include/configs/rk3399_common.h | 1 - include/configs/sama5d2_xplained.h | 1 - include/configs/sama5d3_xplained.h | 1 - include/configs/sama5d3xek.h | 1 - include/configs/sama5d4_xplained.h | 1 - include/configs/sama5d4ek.h | 1 - include/configs/siemens-am33x-common.h | 1 - include/configs/socfpga_common.h | 1 - include/configs/sunxi-common.h | 1 - include/configs/tam3517-common.h | 1 - include/configs/tao3530.h | 1 - include/configs/ti814x_evm.h | 1 - include/configs/ti816x_evm.h | 1 - include/configs/ti_armv7_common.h | 1 - include/configs/tricorder.h | 1 - include/configs/uniphier.h | 1 - include/configs/woodburn_sd.h | 1 - include/configs/zynq-common.h | 1 - scripts/config_whitelist.txt | 1 - 80 files changed, 96 insertions(+), 51 deletions(-) (limited to 'scripts') diff --git a/README b/README index 00830d76df9..cbf42e73d5a 100644 --- a/README +++ b/README @@ -3338,9 +3338,8 @@ FIT uImage format: CONFIG_SPL_INIT_MINIMAL Arch init code should be built for a very small image - CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, - CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS, - Address and partition on the MMC to load U-Boot from + CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS + Size of partition on the MMC to load U-Boot from when the MMC is being used in raw mode. CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION diff --git a/common/spl/Kconfig b/common/spl/Kconfig index bb99f1fcff4..df9e0ce68f9 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -70,6 +70,33 @@ config SPL_DISPLAY_PRINT banner ("U-Boot SPL ..."). This function should be provided by the board. +config SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR + bool "MMC raw mode: by sector" + depends on SPL + default y if ARCH_SUNXI || ARCH_DAVINCI || ARCH_UNIPHIER ||ARCH_MX6 || \ + ARCH_ROCKCHIP || ARCH_MVEBU || ARCH_SOCFPGA || \ + ARCH_AT91 || ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || \ + OMAP44XX || OMAP54XX || AM33XX || AM43XX + help + Use sector number for specifying U-Boot location on MMC/SD in + raw mode. + +config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR + hex "Address on the MMC to load U-Boot from" + depends on SPL && SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR + default 0x50 if ARCH_SUNXI + default 0x75 if ARCH_DAVINCI + default 0x80 if ARCH_UNIPHIER + default 0x8a if ARCH_MX6 + default 0x100 if ARCH_ROCKCHIP + default 0x140 if ARCH_MVEBU + default 0x200 if ARCH_SOCFPGA || ARCH_AT91 + default 0x300 if ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || OMAP44XX || \ + OMAP54XX || AM33XX || AM43XX + help + Address on the MMC to load U-Boot from, when the MMC is being used + in raw mode. Units: MMC sectors (1 sector = 512 bytes). + config TPL bool depends on SPL && SUPPORT_TPL diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index c674e61cbde..0b681c23de9 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -165,7 +165,7 @@ static int mmc_load_image_raw_partition(struct spl_image_info *spl_image, return -1; } -#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR +#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR return mmc_load_image_raw_sector(spl_image, mmc, info.start + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR); #else @@ -327,7 +327,7 @@ static int spl_mmc_load_image(struct spl_image_info *spl_image, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION); if (!err) return err; -#if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR) +#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR err = mmc_load_image_raw_sector(spl_image, mmc, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR); if (!err) diff --git a/configs/brppt1_mmc_defconfig b/configs/brppt1_mmc_defconfig index 78f3093c92c..41eac1828cf 100644 --- a/configs/brppt1_mmc_defconfig +++ b/configs/brppt1_mmc_defconfig @@ -20,6 +20,8 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/brppt1_nand_defconfig b/configs/brppt1_nand_defconfig index 8e5325ecb60..f8d5539ad40 100644 --- a/configs/brppt1_nand_defconfig +++ b/configs/brppt1_nand_defconfig @@ -20,6 +20,8 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/brppt1_spi_defconfig b/configs/brppt1_spi_defconfig index 9a5ed65514f..17b9cb1e800 100644 --- a/configs/brppt1_spi_defconfig +++ b/configs/brppt1_spi_defconfig @@ -23,6 +23,8 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/brxre1_defconfig b/configs/brxre1_defconfig index 16415334ca6..7c0cf965cd2 100644 --- a/configs/brxre1_defconfig +++ b/configs/brxre1_defconfig @@ -18,6 +18,8 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_HUSH_PARSER=y # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_BOOTM is not set diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig index 0891b917b0b..d06b75c027c 100644 --- a/configs/clearfog_defconfig +++ b/configs/clearfog_defconfig @@ -13,6 +13,7 @@ CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x141 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig index 9c3a6ec6993..dc7544a17f1 100644 --- a/configs/cm_fx6_defconfig +++ b/configs/cm_fx6_defconfig @@ -15,6 +15,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL" CONFIG_BOOTDELAY=3 CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="CM-FX6 # " CONFIG_CMD_BOOTZ=y diff --git a/configs/cm_t43_defconfig b/configs/cm_t43_defconfig index d359fabf684..2d7884119d6 100644 --- a/configs/cm_t43_defconfig +++ b/configs/cm_t43_defconfig @@ -16,6 +16,8 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x480 CONFIG_SPL_MTD_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="CM-T43 # " diff --git a/configs/cm_t54_defconfig b/configs/cm_t54_defconfig index c30ee0be6db..e002e1c8511 100644 --- a/configs/cm_t54_defconfig +++ b/configs/cm_t54_defconfig @@ -7,6 +7,7 @@ CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 CONFIG_SPL_SATA_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="CM-T54 # " diff --git a/configs/draco_defconfig b/configs/draco_defconfig index 5212facc534..0cb44129931 100644 --- a/configs/draco_defconfig +++ b/configs/draco_defconfig @@ -19,6 +19,8 @@ CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot# " CONFIG_AUTOBOOT_KEYED=y diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig index 4e5baac33c9..8fb6ebd7bf0 100644 --- a/configs/etamin_defconfig +++ b/configs/etamin_defconfig @@ -19,6 +19,8 @@ CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot# " CONFIG_AUTOBOOT_KEYED=y diff --git a/configs/kc1_defconfig b/configs/kc1_defconfig index b73a2de1b6f..c2d5d47692b 100644 --- a/configs/kc1_defconfig +++ b/configs/kc1_defconfig @@ -31,3 +31,4 @@ CONFIG_G_DNL_MANUFACTURER="Texas Instruments" CONFIG_G_DNL_VENDOR_NUM=0x0451 CONFIG_G_DNL_PRODUCT_NUM=0xd022 CONFIG_OF_LIBFDT=y +# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set diff --git a/configs/ls1021aqds_nand_defconfig b/configs/ls1021aqds_nand_defconfig index 2bdc7239432..e28aa487b98 100644 --- a/configs/ls1021aqds_nand_defconfig +++ b/configs/ls1021aqds_nand_defconfig @@ -21,6 +21,8 @@ CONFIG_SILENT_CONSOLE=y # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/ls1021aqds_sdcard_ifc_defconfig b/configs/ls1021aqds_sdcard_ifc_defconfig index 402cce77a74..beed9ac6bd8 100644 --- a/configs/ls1021aqds_sdcard_ifc_defconfig +++ b/configs/ls1021aqds_sdcard_ifc_defconfig @@ -20,6 +20,8 @@ CONFIG_SILENT_CONSOLE=y # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/ls1021aqds_sdcard_qspi_defconfig b/configs/ls1021aqds_sdcard_qspi_defconfig index 6f3588ebbbd..d6b08de2a26 100644 --- a/configs/ls1021aqds_sdcard_qspi_defconfig +++ b/configs/ls1021aqds_sdcard_qspi_defconfig @@ -20,6 +20,8 @@ CONFIG_SILENT_CONSOLE=y # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig index 8178e8a0a24..ae0d8143d94 100644 --- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig +++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig @@ -19,6 +19,8 @@ CONFIG_SILENT_CONSOLE=y # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_CRYPTO_SUPPORT=y CONFIG_SPL_HASH_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig index eef1c1c9bdd..22be22ce573 100644 --- a/configs/ls1021atwr_sdcard_ifc_defconfig +++ b/configs/ls1021atwr_sdcard_ifc_defconfig @@ -19,6 +19,8 @@ CONFIG_SILENT_CONSOLE=y # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig b/configs/ls1021atwr_sdcard_qspi_defconfig index 3f6fb17945f..80329fcf75f 100644 --- a/configs/ls1021atwr_sdcard_qspi_defconfig +++ b/configs/ls1021atwr_sdcard_qspi_defconfig @@ -20,6 +20,8 @@ CONFIG_SILENT_CONSOLE=y # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig index dbdb416f544..de0780157c5 100644 --- a/configs/ls1043aqds_nand_defconfig +++ b/configs/ls1043aqds_nand_defconfig @@ -17,6 +17,8 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT" CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig index 24220edccc8..48ea853b9a2 100644 --- a/configs/ls1043aqds_sdcard_ifc_defconfig +++ b/configs/ls1043aqds_sdcard_ifc_defconfig @@ -17,6 +17,8 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/ls1043aqds_sdcard_qspi_defconfig b/configs/ls1043aqds_sdcard_qspi_defconfig index fdcbf8a612e..fd0922da032 100644 --- a/configs/ls1043aqds_sdcard_qspi_defconfig +++ b/configs/ls1043aqds_sdcard_qspi_defconfig @@ -17,6 +17,8 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI" CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig index b21f47e13b8..da699860100 100644 --- a/configs/ls1043ardb_nand_defconfig +++ b/configs/ls1043ardb_nand_defconfig @@ -17,6 +17,8 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT" CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig index 12ac6482628..c0b0a9253e4 100644 --- a/configs/ls1043ardb_sdcard_defconfig +++ b/configs/ls1043ardb_sdcard_defconfig @@ -17,6 +17,8 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig index 01140b9c56b..74fcd4ae723 100644 --- a/configs/ls1046aqds_nand_defconfig +++ b/configs/ls1046aqds_nand_defconfig @@ -8,6 +8,8 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig index e6eeadd6e98..fe9ad0efcaa 100644 --- a/configs/ls1046aqds_sdcard_ifc_defconfig +++ b/configs/ls1046aqds_sdcard_ifc_defconfig @@ -8,6 +8,8 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig index 8a148625351..17000820a45 100644 --- a/configs/ls1046aqds_sdcard_qspi_defconfig +++ b/configs/ls1046aqds_sdcard_qspi_defconfig @@ -8,6 +8,8 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT_QSPI" CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig index ba28047c299..fd21959becd 100644 --- a/configs/ls1046ardb_emmc_defconfig +++ b/configs/ls1046ardb_emmc_defconfig @@ -8,6 +8,8 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SYS_FSL_DDR4,EMMC_BOOT" CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MMC=y diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig index 01e63979ee2..0b810d3bc4b 100644 --- a/configs/ls1046ardb_sdcard_defconfig +++ b/configs/ls1046ardb_sdcard_defconfig @@ -8,6 +8,8 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SYS_FSL_DDR4" CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MMC=y diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig index b73e42687e2..650d23d7a0b 100644 --- a/configs/pxm2_defconfig +++ b/configs/pxm2_defconfig @@ -23,6 +23,8 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot# " CONFIG_AUTOBOOT_KEYED=y diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig index ab65c145bd5..d3ac645ad6a 100644 --- a/configs/rastaban_defconfig +++ b/configs/rastaban_defconfig @@ -19,6 +19,8 @@ CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot# " CONFIG_AUTOBOOT_KEYED=y diff --git a/configs/rut_defconfig b/configs/rut_defconfig index ff3c57190b7..4c99c13c825 100644 --- a/configs/rut_defconfig +++ b/configs/rut_defconfig @@ -23,6 +23,8 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot# " CONFIG_AUTOBOOT_KEYED=y diff --git a/configs/sniper_defconfig b/configs/sniper_defconfig index 02b51c46d50..d529a69d6a4 100644 --- a/configs/sniper_defconfig +++ b/configs/sniper_defconfig @@ -32,3 +32,4 @@ CONFIG_G_DNL_MANUFACTURER="Texas Instruments" CONFIG_G_DNL_VENDOR_NUM=0x0451 CONFIG_G_DNL_PRODUCT_NUM=0xd022 CONFIG_OF_LIBFDT=y +# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig index a9d3e7ed600..7e1b63bc807 100644 --- a/configs/thuban_defconfig +++ b/configs/thuban_defconfig @@ -19,6 +19,8 @@ CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot# " CONFIG_AUTOBOOT_KEYED=y diff --git a/configs/ti814x_evm_defconfig b/configs/ti814x_evm_defconfig index 9d1df816b2b..029791718e9 100644 --- a/configs/ti814x_evm_defconfig +++ b/configs/ti814x_evm_defconfig @@ -14,6 +14,8 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot# " # CONFIG_CMD_IMLS is not set diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig index e3a9f03e135..7d3a7d6634c 100644 --- a/configs/ti816x_evm_defconfig +++ b/configs/ti816x_evm_defconfig @@ -13,6 +13,8 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="u-boot/ti816x# " # CONFIG_CMD_IMLS is not set diff --git a/configs/woodburn_sd_defconfig b/configs/woodburn_sd_defconfig index 01aae3b06bd..085c2dff6f6 100644 --- a/configs/woodburn_sd_defconfig +++ b/configs/woodburn_sd_defconfig @@ -10,6 +10,8 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/woodburn/imximage.cfg" CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="woodburn U-Boot > " CONFIG_CMD_MMC=y diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 6d271100c73..943ab3a6733 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -275,7 +275,6 @@ #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index cc89a160db4..deb1babf469 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -335,7 +335,6 @@ #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 5e37e2a8423..cb066ac57ca 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -194,7 +194,6 @@ #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 7fddf4f5daa..faa232c1c81 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -238,7 +238,6 @@ #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index db9bdefa091..efdf88db0c2 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -237,7 +237,6 @@ #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h index 0e138648d52..724343ea1d2 100644 --- a/include/configs/brppt1.h +++ b/include/configs/brppt1.h @@ -53,7 +53,6 @@ #define CONFIG_OMAP_HSMMC #define CONFIG_SUPPORT_EMMC_BOOT /* RAW SD card / eMMC locations. */ - #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /*addr. 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #endif /* CONFIG_EMMC_BOOT */ diff --git a/include/configs/brxre1.h b/include/configs/brxre1.h index b9f69be27d3..d3ce692d522 100644 --- a/include/configs/brxre1.h +++ b/include/configs/brxre1.h @@ -48,7 +48,6 @@ #define CONFIG_OMAP_HSMMC #define CONFIG_SUPPORT_EMMC_BOOT /* RAW SD card / eMMC locations. */ -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /*addr. 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ /* Always 64 KiB env size */ diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index a8cda40f684..bf123bb628b 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -131,8 +131,6 @@ /* SPL related MMC defines */ #define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR ((CONFIG_SYS_U_BOOT_OFFS / 512)\ - + 1) #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS ((512 << 10) / 512) /* 512KiB */ #ifdef CONFIG_SPL_BUILD #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 0ac3ec7da4c..c47d1fb768d 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -245,8 +245,6 @@ /* SPL */ #include "imx6_spl.h" -#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80 /* offset 64 kb */ #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024) #define CONFIG_SPL_SPI_LOAD diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 6caac1dfcac..66727758994 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -292,7 +292,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index 3a605f7504b..5ec4926dd8e 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -91,7 +91,6 @@ #include #undef CONFIG_SYS_MONITOR_LEN -#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR #define CONFIG_ENV_SIZE (16 * 1024) #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG @@ -152,7 +151,6 @@ #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20)) #define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x480 #define CONFIG_SPL_SPI_LOAD /* EEPROM */ diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h index a3b1e5fe8b8..abca5be75bb 100644 --- a/include/configs/cm_t54.h +++ b/include/configs/cm_t54.h @@ -31,10 +31,8 @@ #define CONFIG_BAUDRATE 115200 /* SD/MMC RAW boot */ -#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR #undef CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 /* 0x40000 - 256 KB */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 /* 384 KB */ /* MMC ENV related defines */ diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 2403ca3148a..35601159dde 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -346,7 +346,6 @@ /* Load U-Boot Image From MMC */ #ifdef CONFIG_SPL_MMC_LOAD -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x75 #undef CONFIG_SPL_SPI_LOAD #endif diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index 72c38e2407f..70c5e6ac264 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -133,7 +133,6 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 #define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512) #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS ((512 << 10) / 512) /* 512KiB */ #ifdef CONFIG_SPL_BUILD #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 76d1ca088d6..be31d1a0bf9 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -37,7 +37,6 @@ /* MMC support */ #if defined(CONFIG_SPL_MMC_SUPPORT) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 138 /* offset 69KB */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS/2*1024) diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 53f03688141..fdef29b31c8 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -61,7 +61,6 @@ unsigned long get_board_ddr_clk(void); #endif #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x600 #define CONFIG_SPL_TEXT_BASE 0x10000000 diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 4a579b1adbe..3cc97cd8016 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -106,7 +106,6 @@ #endif #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 #ifdef CONFIG_SECURE_BOOT #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 64682b18756..06c29740a44 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -52,7 +52,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xf0 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x500 #define CONFIG_SPL_TEXT_BASE 0x10000000 diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index c4bbd5600d3..df482e2fcbc 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -61,7 +61,6 @@ #define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x110 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x500 #define CONFIG_SPL_TEXT_BASE 0x10000000 #define CONFIG_SPL_MAX_SIZE 0x1f000 /* 124 KiB */ diff --git a/include/configs/mcx.h b/include/configs/mcx.h index b9a2ad35212..7db9e5a1dd6 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -328,7 +328,6 @@ #define CONFIG_SPL_BSS_START_ADDR 0x8f080000 /* end of RAM */ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index b2a84125b6b..16f897dc009 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -52,7 +52,6 @@ #define CONFIG_OMAP_HSMMC /* SPL */ -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h index 64db0dac37b..36fe94dbc6b 100644 --- a/include/configs/picosam9g45.h +++ b/include/configs/picosam9g45.h @@ -171,7 +171,6 @@ #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index 0868612c136..5358372587b 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -50,7 +50,6 @@ #define CONFIG_CMD_PART /* RAW SD card / eMMC locations. */ -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 256 #define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10) /* FAT sd card locations. */ diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index d75feadab7c..aa646c6f52d 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -41,7 +41,6 @@ #define CONFIG_CMD_PART /* RAW SD card / eMMC locations. */ -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 256 #define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10) /* FAT sd card locations. */ diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index f6946453e5d..55ec9175148 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -112,7 +112,6 @@ #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 5e6617410c4..c72fc5303fb 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -129,7 +129,6 @@ #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 1b053a6362c..f9ca9149d6c 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -168,7 +168,6 @@ #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 249e661d8b7..0ae858d4968 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -128,7 +128,6 @@ #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 00ed4009faa..5588a1822b1 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -126,7 +126,6 @@ #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 7de3cf6d9ae..31fcc947dde 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -129,7 +129,6 @@ #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_FS_FAT diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index d37e5958b58..58a65508449 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -320,7 +320,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img" #else #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 /* offset 512 sect (256k) */ #endif #endif diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 8363414828f..2e02f8cd185 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -199,7 +199,6 @@ #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" #endif -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 80 /* 40KiB */ #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ #if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I) diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 1527d90afd7..098c9bcc6c2 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -210,7 +210,6 @@ #define CONFIG_SPL_BSS_START_ADDR 0x8f080000 /* end of RAM */ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 9e85b1da023..6a169b0f0d3 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -276,7 +276,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index e7f4fba132d..5cfed0d6196 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -161,7 +161,6 @@ #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 390c5aee26e..0a459fb5c56 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -125,7 +125,6 @@ #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 0d74c50bffa..03496c7b35b 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -236,7 +236,6 @@ /* RAW SD card / eMMC locations. */ -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ /* FAT sd card locations. */ diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 6cd3ca5328c..fbef1f0e410 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -318,7 +318,6 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 5be46e5c5a2..f9c9f821bfa 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -280,7 +280,6 @@ /* subtract sizeof(struct image_header) */ #define CONFIG_SYS_UBOOT_BASE (0x60000 - 0x40) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_MAX_FOOTPRINT 0x10000 diff --git a/include/configs/woodburn_sd.h b/include/configs/woodburn_sd.h index 5a04b99400a..4c509dfca88 100644 --- a/include/configs/woodburn_sd.h +++ b/include/configs/woodburn_sd.h @@ -23,7 +23,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm1136/u-boot-spl.lds" #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x100 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 /* 512 KB */ #define CONFIG_SPL_TEXT_BASE 0x10002300 diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 3a2080f9e54..f305598fde5 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -303,7 +303,6 @@ /* MMC support */ #ifdef CONFIG_ZYNQ_SDHCI -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index d476367088c..f511e29715e 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -6482,7 +6482,6 @@ CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR CONFIG_SYS_MMC_BASE CONFIG_SYS_MMC_CD_PIN CONFIG_SYS_MMC_CLK_OD -- cgit v1.3.1 From 693d4c9f1dc40fcf24ced459bc4d1b46db33298a Mon Sep 17 00:00:00 2001 From: Semen Protsenko Date: Wed, 16 Nov 2016 19:19:06 +0200 Subject: spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS This option isn't used for anything, so get rid of it. Signed-off-by: Sam Protsenko --- README | 4 ---- include/configs/am3517_crane.h | 1 - include/configs/am3517_evm.h | 1 - include/configs/at91sam9m10g45ek.h | 1 - include/configs/at91sam9n12ek.h | 1 - include/configs/at91sam9x5ek.h | 1 - include/configs/brppt1.h | 2 -- include/configs/brxre1.h | 2 -- include/configs/clearfog.h | 1 - include/configs/cm_fx6.h | 1 - include/configs/cm_t35.h | 1 - include/configs/cm_t54.h | 5 ----- include/configs/db-88f6820-gp.h | 1 - include/configs/draco.h | 2 -- include/configs/etamin.h | 2 -- include/configs/imx6_spl.h | 3 +-- include/configs/ls1021aqds.h | 1 - include/configs/ls1021atwr.h | 6 +----- include/configs/ls1043a_common.h | 1 - include/configs/ls1046a_common.h | 1 - include/configs/omap3_evm.h | 1 - include/configs/picosam9g45.h | 1 - include/configs/pxm2.h | 2 -- include/configs/rastaban.h | 2 -- include/configs/rut.h | 2 -- include/configs/sama5d2_xplained.h | 1 - include/configs/sama5d3_xplained.h | 1 - include/configs/sama5d3xek.h | 1 - include/configs/sama5d4_xplained.h | 1 - include/configs/sama5d4ek.h | 1 - include/configs/tao3530.h | 1 - include/configs/thuban.h | 2 -- include/configs/ti814x_evm.h | 1 - include/configs/ti816x_evm.h | 1 - include/configs/ti_armv7_common.h | 3 --- include/configs/woodburn_sd.h | 1 - include/configs/zynq-common.h | 1 - scripts/config_whitelist.txt | 1 - 38 files changed, 2 insertions(+), 60 deletions(-) (limited to 'scripts') diff --git a/README b/README index cbf42e73d5a..47bc215fe9c 100644 --- a/README +++ b/README @@ -3338,10 +3338,6 @@ FIT uImage format: CONFIG_SPL_INIT_MINIMAL Arch init code should be built for a very small image - CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS - Size of partition on the MMC to load U-Boot from - when the MMC is being used in raw mode. - CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION Partition on the MMC to load U-Boot from when the MMC is being used in raw mode diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 943ab3a6733..2f20e10eff9 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -275,7 +275,6 @@ #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index deb1babf469..a4ae5453b2f 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -335,7 +335,6 @@ #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index cb066ac57ca..fd0504d40b5 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -193,7 +193,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index faa232c1c81..b825464f704 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -237,7 +237,6 @@ #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index efdf88db0c2..843f03a1ea7 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -236,7 +236,6 @@ #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h index 724343ea1d2..a5fdbbba3a9 100644 --- a/include/configs/brppt1.h +++ b/include/configs/brppt1.h @@ -52,8 +52,6 @@ #define CONFIG_GENERIC_MMC #define CONFIG_OMAP_HSMMC #define CONFIG_SUPPORT_EMMC_BOOT -/* RAW SD card / eMMC locations. */ - #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #endif /* CONFIG_EMMC_BOOT */ /* diff --git a/include/configs/brxre1.h b/include/configs/brxre1.h index d3ce692d522..a6369d63b8e 100644 --- a/include/configs/brxre1.h +++ b/include/configs/brxre1.h @@ -47,8 +47,6 @@ #define CONFIG_GENERIC_MMC #define CONFIG_OMAP_HSMMC #define CONFIG_SUPPORT_EMMC_BOOT -/* RAW SD card / eMMC locations. */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ /* Always 64 KiB env size */ #define CONFIG_ENV_SIZE (64 << 10) diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index bf123bb628b..c976ec867c5 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -131,7 +131,6 @@ /* SPL related MMC defines */ #define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS ((512 << 10) / 512) /* 512KiB */ #ifdef CONFIG_SPL_BUILD #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ #endif diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index c47d1fb768d..0dad9c3bd75 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -240,7 +240,6 @@ /* misc */ #define CONFIG_STACKSIZE (128 * 1024) #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */ #define CONFIG_MISC_INIT_R /* SPL */ diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 66727758994..201711d987f 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -292,7 +292,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h index abca5be75bb..952538d5a14 100644 --- a/include/configs/cm_t54.h +++ b/include/configs/cm_t54.h @@ -30,11 +30,6 @@ #define CONFIG_SYS_NS16550_COM4 UART4_BASE #define CONFIG_BAUDRATE 115200 -/* SD/MMC RAW boot */ -#undef CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS - -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 /* 384 KB */ - /* MMC ENV related defines */ #undef CONFIG_ENV_OFFSET #undef CONFIG_ENV_SIZE diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index 70c5e6ac264..b8c52321789 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -133,7 +133,6 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 #define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS ((512 << 10) / 512) /* 512KiB */ #ifdef CONFIG_SPL_BUILD #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ #endif diff --git a/include/configs/draco.h b/include/configs/draco.h index 5e4bf484131..7c4179d23f9 100644 --- a/include/configs/draco.h +++ b/include/configs/draco.h @@ -45,8 +45,6 @@ #define EEPROM_ADDR_DDR3 0x90 #define EEPROM_ADDR_CHIP 0x120 -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 - #undef CONFIG_MII #undef CONFIG_PHY_GIGE #define CONFIG_PHY_SMSC diff --git a/include/configs/etamin.h b/include/configs/etamin.h index 9e5ee91c890..eb17d68d880 100644 --- a/include/configs/etamin.h +++ b/include/configs/etamin.h @@ -103,8 +103,6 @@ #define EEPROM_ADDR_DDR3 0x90 #define EEPROM_ADDR_CHIP 0x120 -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 - #undef CONFIG_MII #undef CONFIG_PHY_GIGE #define CONFIG_PHY_SMSC diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index be31d1a0bf9..0662053f859 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -37,9 +37,8 @@ /* MMC support */ #if defined(CONFIG_SPL_MMC_SUPPORT) -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 -#define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS/2*1024) +#define CONFIG_SYS_MONITOR_LEN 409600 /* 400 KB */ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index fdef29b31c8..128da8a3528 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -61,7 +61,6 @@ unsigned long get_board_ddr_clk(void); #endif #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x600 #define CONFIG_SPL_TEXT_BASE 0x10000000 #define CONFIG_SPL_MAX_SIZE 0x1a000 diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 3cc97cd8016..145833287e5 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -108,15 +108,11 @@ #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #ifdef CONFIG_SECURE_BOOT -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) /* * HDR would be appended at end of image and copied to DDR along * with U-Boot image. */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS (0x400 + \ - (CONFIG_U_BOOT_HDR_SIZE / 512) -#else -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) #endif /* ifdef CONFIG_SECURE_BOOT */ #define CONFIG_SPL_TEXT_BASE 0x10000000 diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 06c29740a44..7a407aa70a2 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -52,7 +52,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x500 #define CONFIG_SPL_TEXT_BASE 0x10000000 #define CONFIG_SPL_MAX_SIZE 0x1d000 diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index df482e2fcbc..3887faa97b0 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -61,7 +61,6 @@ #define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x500 #define CONFIG_SPL_TEXT_BASE 0x10000000 #define CONFIG_SPL_MAX_SIZE 0x1f000 /* 124 KiB */ #define CONFIG_SPL_STACK 0x10020000 diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 16f897dc009..f4f4e4917a5 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -52,7 +52,6 @@ #define CONFIG_OMAP_HSMMC /* SPL */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h index 36fe94dbc6b..9051c1cefcc 100644 --- a/include/configs/picosam9g45.h +++ b/include/configs/picosam9g45.h @@ -170,7 +170,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index 2aa184a2c2d..d797a2ce4d7 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -40,8 +40,6 @@ #define CONFIG_SYS_I2C_SPEED 400000 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 - #define CONFIG_PHY_ATHEROS #define CONFIG_FACTORYSET diff --git a/include/configs/rastaban.h b/include/configs/rastaban.h index 5adad665566..d6fead27db3 100644 --- a/include/configs/rastaban.h +++ b/include/configs/rastaban.h @@ -48,8 +48,6 @@ #define EEPROM_ADDR_DDR3 0x90 #define EEPROM_ADDR_CHIP 0x120 -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 - #undef CONFIG_MII #undef CONFIG_PHY_GIGE #define CONFIG_PHY_SMSC diff --git a/include/configs/rut.h b/include/configs/rut.h index 3d7b85f306c..e5933b85ee1 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -35,8 +35,6 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 - #define CONFIG_PHY_NATSEMI #define CONFIG_FACTORYSET diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index 55ec9175148..61e337617cf 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -111,7 +111,6 @@ #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index c72fc5303fb..f48559e3219 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -128,7 +128,6 @@ #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index f9ca9149d6c..ed91bdc1243 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -167,7 +167,6 @@ #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 0ae858d4968..5d788474508 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -127,7 +127,6 @@ #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 5588a1822b1..498b32b639d 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -125,7 +125,6 @@ #ifdef CONFIG_SYS_USE_MMC #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 6a169b0f0d3..861e5027754 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -276,7 +276,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/thuban.h b/include/configs/thuban.h index e844cdd2792..a2352538dd9 100644 --- a/include/configs/thuban.h +++ b/include/configs/thuban.h @@ -41,8 +41,6 @@ #define EEPROM_ADDR_DDR3 0x90 #define EEPROM_ADDR_CHIP 0x120 -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 - #undef CONFIG_MII #undef CONFIG_PHY_GIGE #define CONFIG_PHY_SMSC diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 5cfed0d6196..a5dc91b3bae 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -161,7 +161,6 @@ #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 0a459fb5c56..381e9a37175 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -125,7 +125,6 @@ #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 03496c7b35b..1be8137e33f 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -235,9 +235,6 @@ #endif -/* RAW SD card / eMMC locations. */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ - /* FAT sd card locations. */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/woodburn_sd.h b/include/configs/woodburn_sd.h index 4c509dfca88..eb42d8c347f 100644 --- a/include/configs/woodburn_sd.h +++ b/include/configs/woodburn_sd.h @@ -23,7 +23,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm1136/u-boot-spl.lds" #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 /* 512 KB */ #define CONFIG_SPL_TEXT_BASE 0x10002300 #define CONFIG_SPL_MAX_SIZE (64 * 1024) /* 8 KB for stack */ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index f305598fde5..8524b280b95 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -303,7 +303,6 @@ /* MMC support */ #ifdef CONFIG_ZYNQ_SDHCI -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index f511e29715e..fc2a08a8566 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -7830,7 +7830,6 @@ CONFIG_SYS_USE_SERIALFLASH CONFIG_SYS_USE_SPIFLASH CONFIG_SYS_USE_UBI CONFIG_SYS_USR_EXCEP -CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_VA_BITS CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR -- cgit v1.3.1 From d804a5e1c369e59f23723cd21e1e422b7702a0ac Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Mon, 14 Nov 2016 21:40:25 +0100 Subject: serial: pxa: use kconfig for serial configuration Migrate the PXA serial driver to be configured via Kconfig. Signed-off-by: Marcel Ziswiler Reviewed-by: Marek Vasut --- configs/colibri_pxa270_defconfig | 1 + configs/h2200_defconfig | 1 + configs/zipitz2_defconfig | 1 + drivers/serial/Kconfig | 6 ++++++ include/configs/colibri_pxa270.h | 1 - include/configs/h2200.h | 2 -- include/configs/zipitz2.h | 1 - scripts/config_whitelist.txt | 1 - 8 files changed, 9 insertions(+), 5 deletions(-) (limited to 'scripts') diff --git a/configs/colibri_pxa270_defconfig b/configs/colibri_pxa270_defconfig index 9a57041c36a..85740c21265 100644 --- a/configs/colibri_pxa270_defconfig +++ b/configs/colibri_pxa270_defconfig @@ -13,6 +13,7 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_PXA_SERIAL=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y diff --git a/configs/h2200_defconfig b/configs/h2200_defconfig index c1b359e54d7..a47159a283d 100644 --- a/configs/h2200_defconfig +++ b/configs/h2200_defconfig @@ -24,3 +24,4 @@ CONFIG_SYS_PROMPT="> " # CONFIG_CMD_NFS is not set CONFIG_CMD_PING=y # CONFIG_CMD_MISC is not set +CONFIG_PXA_SERIAL=y diff --git a/configs/zipitz2_defconfig b/configs/zipitz2_defconfig index 8eb9be4357b..58465799547 100644 --- a/configs/zipitz2_defconfig +++ b/configs/zipitz2_defconfig @@ -14,6 +14,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_PXA_SERIAL=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_LCD=y diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 56c024f97a1..620dd82d6b9 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -407,4 +407,10 @@ config MSM_SERIAL for example APQ8016 and MSM8916. Single baudrate is supported in current implementation (115200). +config PXA_SERIAL + bool "PXA serial port support" + help + If you have a machine based on a Marvell XScale PXA2xx CPU you + can enable its onboard serial ports by enabling this option. + endmenu diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index e44a84729bc..b16abdc9ec9 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -43,7 +43,6 @@ /* * Serial Console Configuration */ -#define CONFIG_PXA_SERIAL #define CONFIG_FFUART 1 #define CONFIG_CONS_INDEX 3 #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/h2200.h b/include/configs/h2200.h index 8e77982580f..18b5488392d 100644 --- a/include/configs/h2200.h +++ b/include/configs/h2200.h @@ -107,8 +107,6 @@ /* * Serial port */ - -#define CONFIG_PXA_SERIAL #define CONFIG_FFUART #define CONFIG_CONS_INDEX 3 diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index ed2c9acdb1d..97dfc0e6ec1 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -49,7 +49,6 @@ * Serial Console Configuration * STUART - the lower serial port on Colibri board */ -#define CONFIG_PXA_SERIAL #define CONFIG_STUART 1 #define CONFIG_CONS_INDEX 2 #define CONFIG_BAUDRATE 115200 diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index fc2a08a8566..d6b2a457b41 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -3740,7 +3740,6 @@ CONFIG_PWM_IMX CONFIG_PXA_LCD CONFIG_PXA_MMC_GENERIC CONFIG_PXA_PWR_I2C -CONFIG_PXA_SERIAL CONFIG_PXA_STD_I2C CONFIG_PXA_VGA CONFIG_PXA_VIDEO -- cgit v1.3.1 From 4c6a43de5a584e2496f78e252a83b0f7ec9bcfc8 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 13 Nov 2016 19:54:08 +0100 Subject: sunxi: Mele_M5_defconfig: Drop non existing STATUSLED setting And also remove it from scripts/config_whitelist.txt as the Mele_M5_defconfig was the only one defining it. Signed-off-by: Hans de Goede Acked-by: Ian Campbell Reviewed-by: Jagan Teki --- configs/Mele_M5_defconfig | 2 +- scripts/config_whitelist.txt | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'scripts') diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig index fffc332a726..09addc569fd 100644 --- a/configs/Mele_M5_defconfig +++ b/configs/Mele_M5_defconfig @@ -9,7 +9,7 @@ CONFIG_VIDEO_COMPOSITE=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_AHCI=y -CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,STATUSLED=234" +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index d6b2a457b41..9851251fa42 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -4328,7 +4328,6 @@ CONFIG_STAMP_CF CONFIG_STANDALONE_LOAD_ADDR CONFIG_STATIC_BOARD_REV CONFIG_STATIC_RELA -CONFIG_STATUSLED CONFIG_STATUS_LED CONFIG_STD_DEVICES_SETTINGS CONFIG_STK52XX -- cgit v1.3.1 From 877ea607a8e07a9ed308e44a58e8e2b9028f01f2 Mon Sep 17 00:00:00 2001 From: Max Krummenacher Date: Wed, 16 Nov 2016 17:49:25 +0100 Subject: colibri_vf: usb gadget: toradex pid is now set generically remove now unused CONFIG_TRDX_PID_XXX Signed-off-by: Marcel Ziswiler Acked-by: Stefan Agner Acked-by: Max Krummenacher --- board/toradex/colibri_vf/colibri_vf.c | 16 ---------------- include/configs/colibri_vf.h | 7 ------- scripts/config_whitelist.txt | 5 ----- 3 files changed, 28 deletions(-) (limited to 'scripts') diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c index c65ccb3fd76..e65d9c35580 100644 --- a/board/toradex/colibri_vf/colibri_vf.c +++ b/board/toradex/colibri_vf/colibri_vf.c @@ -528,22 +528,6 @@ int checkboard(void) return 0; } -int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) -{ - unsigned short usb_pid; - - put_unaligned(CONFIG_TRDX_VID, &dev->idVendor); - - if (is_colibri_vf61()) - usb_pid = CONFIG_TRDX_PID_COLIBRI_VF61IT; - else - usb_pid = CONFIG_TRDX_PID_COLIBRI_VF50IT; - - put_unaligned(usb_pid, &dev->idProduct); - - return 0; -} - #ifdef CONFIG_USB_EHCI_VF int board_ehci_hcd_init(int port) { diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 0e622fb5e32..0cd77fff51a 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -208,13 +208,6 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -/* USB Client Support */ -#define CONFIG_TRDX_VID 0x1B67 -#define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016 -#define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017 -#define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018 -#define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019 - /* USB DFU */ #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024) diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 9851251fa42..d0b5e7f3e4a 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -7981,11 +7981,6 @@ CONFIG_TRACE_EARLY_ADDR CONFIG_TRACE_EARLY_SIZE CONFIG_TRAILBLAZER CONFIG_TRATS -CONFIG_TRDX_PID_COLIBRI_VF50 -CONFIG_TRDX_PID_COLIBRI_VF50IT -CONFIG_TRDX_PID_COLIBRI_VF61 -CONFIG_TRDX_PID_COLIBRI_VF61IT -CONFIG_TRDX_VID CONFIG_TSEC CONFIG_TSEC1 CONFIG_TSEC1_NAME -- cgit v1.3.1 From 5991703e88f320767d9390d64a6a9bd62560696b Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Mon, 21 Nov 2016 10:58:52 -0800 Subject: spl: dfu: move DFU Kconfig to SPL Kconfig The DFU Kconfig menu entries should be part of the SPL Kconfig file. Also avoid using the top level Makefile by moving the config dependent build artifacts to the driver/ and driver/usb/gadget/ Makfiles. With that, DFU can be built again in SPL if CONFIG_SPL_DFU_SUPPORT is enabled. Fixes: 6ad6102246d8 ("usb:gadget: Disallow DFU in SPL for now") Signed-off-by: Stefan Agner Reviewed-by: Simon Glass Acked-by: Lukasz Majewski --- Kconfig | 27 --------------------------- common/spl/Kconfig | 26 ++++++++++++++++++++++++++ drivers/Makefile | 3 +++ drivers/usb/gadget/Makefile | 8 ++++++-- include/configs/dra7xx_evm.h | 1 - scripts/Makefile.spl | 3 --- 6 files changed, 35 insertions(+), 33 deletions(-) (limited to 'scripts') diff --git a/Kconfig b/Kconfig index f3a9f73dd0f..529858a79da 100644 --- a/Kconfig +++ b/Kconfig @@ -292,33 +292,6 @@ config FIT_IMAGE_POST_PROCESS injected into the FIT creation (i.e. the blobs would have been pre- processed before being added to the FIT image). -config SPL_DFU_SUPPORT - bool "Enable SPL with DFU to load binaries to memory device" - depends on USB - help - Currently the SPL does not have capability to load the - binaries or boot images to boot devices like ram,eMMC,SPI,etc. - This feature enables the DFU (Device Firmware Upgarde) in SPL with - RAM memory device support. The ROM code will load and execute - the SPL built with dfu. The user can load binaries (u-boot/kernel) to - selected device partition from host-pc using dfu-utils. - This feature will be useful to flash the binaries to factory - or bare-metal boards using USB interface. - -choice - bool "DFU device selection" - depends on SPL_DFU_SUPPORT - -config SPL_DFU_RAM - bool "RAM device" - depends on SPL_DFU_SUPPORT - help - select RAM/DDR memory device for loading binary images - (u-boot/kernel) to the selected device partition using - DFU and execute the u-boot/kernel from RAM. - -endchoice - config SYS_CLK_FREQ depends on ARC || ARCH_SUNXI int "CPU clock frequency" diff --git a/common/spl/Kconfig b/common/spl/Kconfig index df9e0ce68f9..77eadf92fe0 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -524,6 +524,32 @@ config SPL_USB_SUPPORT config options. This enables loading from USB using a configured device. +config SPL_DFU_SUPPORT + bool "Support DFU (Device Firmware Upgarde)" + depends on SPL + select SPL_HASH_SUPPORT + help + This feature enables the DFU (Device Firmware Upgarde) in SPL with + RAM memory device support. The ROM code will load and execute + the SPL built with dfu. The user can load binaries (u-boot/kernel) to + selected device partition from host-pc using dfu-utils. + This feature is useful to flash the binaries to factory or bare-metal + boards using USB interface. + +choice + bool "DFU device selection" + depends on SPL_DFU_SUPPORT + +config SPL_DFU_RAM + bool "RAM device" + depends on SPL_DFU_SUPPORT + help + select RAM/DDR memory device for loading binary images + (u-boot/kernel) to the selected device partition using + DFU and execute the u-boot/kernel from RAM. + +endchoice + config SPL_WATCHDOG_SUPPORT bool "Support watchdog drivers" depends on SPL diff --git a/drivers/Makefile b/drivers/Makefile index 761d0b3e85b..40aba582629 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -34,6 +34,9 @@ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/ obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/ obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/ obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/ +obj-$(CONFIG_SPL_DFU_SUPPORT) += usb/gadget/ +obj-$(CONFIG_SPL_DFU_SUPPORT) += usb/gadget/udc/ +obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/ obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/ obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/ obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/ diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index acc9964e232..5b18e8c1950 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -8,6 +8,10 @@ obj-$(CONFIG_USB_GADGET) += epautoconf.o config.o usbstring.o obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o +ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_SPL_DFU_SUPPORT) += f_dfu.o +endif + # new USB gadget layer dependencies ifdef CONFIG_USB_GADGET obj-$(CONFIG_USB_GADGET_AT91) += at91_udc.o @@ -18,13 +22,13 @@ obj-$(CONFIG_USB_GADGET_DWC2_OTG_PHY) += dwc2_udc_otg_phy.o obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o obj-$(CONFIG_CI_UDC) += ci_udc.o obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o -obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o ifndef CONFIG_SPL_BUILD +obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o obj-$(CONFIG_USB_FUNCTION_DFU) += f_dfu.o -endif obj-$(CONFIG_USB_FUNCTION_MASS_STORAGE) += f_mass_storage.o obj-$(CONFIG_USB_FUNCTION_FASTBOOT) += f_fastboot.o endif +endif ifdef CONFIG_USB_ETHER obj-y += ether.o obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 1834d04afde..75a78542045 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -134,7 +134,6 @@ #undef CONFIG_CMD_BOOTD #ifdef CONFIG_SPL_DFU_SUPPORT #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000 -#define CONFIG_SPL_HASH_SUPPORT #define DFU_ALT_INFO_RAM \ "dfu_alt_info_ram=" \ "kernel ram 0x80200000 0x4000000;" \ diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index 03a2f061a46..23b3997076f 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -66,9 +66,6 @@ endif libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/ libs-y += drivers/ -libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/dfu/ -libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/gadget/ -libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/gadget/udc/ libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/dwc3/ libs-y += dts/ libs-y += fs/ -- cgit v1.3.1 From e94793c844a40606252f2e3f6428063e057b3fd2 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Mon, 21 Nov 2016 10:58:53 -0800 Subject: spl: add USB Gadget config option Introduce USB Gadget config option. This allows to combine Makefile entries for SPL_USBETH_SUPPORT and SPL_DFU_SUPPORT. Signed-off-by: Stefan Agner Acked-by: Lukasz Majewski Tested-by: Ravi Babu --- common/spl/Kconfig | 33 +++++++++++++++++++++------------ configs/am335x_evm_usbspl_defconfig | 1 + drivers/Makefile | 5 ++--- drivers/usb/gadget/Makefile | 3 ++- scripts/Makefile.spl | 2 +- 5 files changed, 27 insertions(+), 17 deletions(-) (limited to 'scripts') diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 77eadf92fe0..cba51f5df62 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -492,17 +492,6 @@ config SPL_SPI_SUPPORT enable SPI drivers that are needed for other purposes also, such as a SPI PMIC. -config SPL_USBETH_SUPPORT - bool "Support USB Ethernet drivers" - depends on SPL - help - Enable access to the USB network subsystem and associated - drivers in SPL. This permits SPL to load U-Boot over a - USB-connected Ethernet link (such as a USB Ethernet dongle) rather - than from an onboard peripheral. Environment support is required - since the network stack uses a number of environment variables. - See also SPL_NET_SUPPORT and SPL_ETH_SUPPORT. - config SPL_USB_HOST_SUPPORT bool "Support USB host drivers" depends on SPL @@ -524,9 +513,27 @@ config SPL_USB_SUPPORT config options. This enables loading from USB using a configured device. +config SPL_USB_GADGET_SUPPORT + bool "Suppport USB Gadget drivers" + depends on SPL + help + Enable USB Gadget API which allows to enable USB device functions + in SPL. + +if SPL_USB_GADGET_SUPPORT + +config SPL_USBETH_SUPPORT + bool "Support USB Ethernet drivers" + help + Enable access to the USB network subsystem and associated + drivers in SPL. This permits SPL to load U-Boot over a + USB-connected Ethernet link (such as a USB Ethernet dongle) rather + than from an onboard peripheral. Environment support is required + since the network stack uses a number of environment variables. + See also SPL_NET_SUPPORT and SPL_ETH_SUPPORT. + config SPL_DFU_SUPPORT bool "Support DFU (Device Firmware Upgarde)" - depends on SPL select SPL_HASH_SUPPORT help This feature enables the DFU (Device Firmware Upgarde) in SPL with @@ -550,6 +557,8 @@ config SPL_DFU_RAM endchoice +endif + config SPL_WATCHDOG_SUPPORT bool "Support watchdog drivers" depends on SPL diff --git a/configs/am335x_evm_usbspl_defconfig b/configs/am335x_evm_usbspl_defconfig index 8c28e28f27b..fdb6f77e7a0 100644 --- a/configs/am335x_evm_usbspl_defconfig +++ b/configs/am335x_evm_usbspl_defconfig @@ -12,6 +12,7 @@ CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_MUSB_NEW_SUPPORT=y CONFIG_SPL_NET_SUPPORT=y CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_GADGET_SUPPORT=y CONFIG_SPL_USBETH_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y diff --git a/drivers/Makefile b/drivers/Makefile index 40aba582629..c19fa142f3a 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -33,9 +33,8 @@ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/ obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/ obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/ -obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/ -obj-$(CONFIG_SPL_DFU_SUPPORT) += usb/gadget/ -obj-$(CONFIG_SPL_DFU_SUPPORT) += usb/gadget/udc/ +obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/ +obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/ obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/ obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/ obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/ diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 5b18e8c1950..0fbbb7c82c6 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_USB_GADGET) += epautoconf.o config.o usbstring.o obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += g_dnl.o obj-$(CONFIG_SPL_DFU_SUPPORT) += f_dfu.o endif @@ -21,8 +22,8 @@ obj-$(CONFIG_USB_GADGET_DWC2_OTG) += dwc2_udc_otg.o obj-$(CONFIG_USB_GADGET_DWC2_OTG_PHY) += dwc2_udc_otg_phy.o obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o obj-$(CONFIG_CI_UDC) += ci_udc.o -obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o ifndef CONFIG_SPL_BUILD +obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o obj-$(CONFIG_USB_FUNCTION_DFU) += f_dfu.o obj-$(CONFIG_USB_FUNCTION_MASS_STORAGE) += f_mass_storage.o diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index 23b3997076f..f379713ad33 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -66,7 +66,7 @@ endif libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/ libs-y += drivers/ -libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/dwc3/ +libs-$(CONFIG_SPL_USB_GADGET_SUPPORT) += drivers/usb/dwc3/ libs-y += dts/ libs-y += fs/ libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/ -- cgit v1.3.1