// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * (C) Copyright 2024 - Analog Devices, Inc.
 */

#include "sc5xx.dtsi"

/ {
	gic: interrupt-controller@310B2000 {
		compatible = "arm,cortex-a5-gic", "arm,cortex-a9-gic";
		#interrupt-cells = <3>;
		#address-cells = <0>;
		interrupt-controller;
		reg = <0x310B2000 0x1000>,
		      <0x310B4000 0x100>;
	};

	soc {
		rcu: rcu@0x3108B000 {
			compatible = "adi,reset-controller";
			reg = <0x3108B000 0x1000>;
			adi,sharc-min = <1>;
			adi,sharc-max = <2>;
			adi,enable-reboot;
			status = "disabled";
		};

		mmc: mmc0@31010000 {
			compatible = "snps,dw-mshc";
			reg = <0x31010000 0x400>;
			pinctrl-names = "default";
			pinctrl-0 = <&mmc_default>;
			bus-width = <4>;
			fifo-depth = <128>;
			clock-names = "biu", "ciu";
			max-frequency = <52000000>;
			status = "disabled";
		};

		usb0: musb@310c1000 {
			compatible = "adi,sc5xx-musb";
			reg = <0x310c1000 0x390>;
			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
						 <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "mc", "dma";
			status = "okay";
		};

		usb1: musb@310c2000 {
			compatible = "adi,sc5xx-musb";
			reg = <0x310c2000 0x390>;
			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
						 <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "mc", "dma";
			status = "disabled";
		};

		sharc1: sharc@0x28240000 {
			compatible = "adi,sc5xx-rproc";
			reg = <0x28240000 0x100>;
			coreid = <1>;
			adi,rcu = <&rcu>;
			status = "disabled";
		};

		sharc2: sharc@0x28a40000 {
			compatible = "adi,sc5xx-rproc";
			reg = <0x28a40000 0x100>;
			coreid = <2>;
			adi,rcu = <&rcu>;
			status = "disabled";
		};
	};
};

&timer0 {
	reg = <0x31001004 0x100>,
			<0x31001060 0x100>;
	clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
};

&pinctrl0 {
	mmc_default: mmc_pins {
		bootph-pre-ram;
		adi,pins = <ADI_ADSP_PIN('F', 2) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('F', 3) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('F', 4) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('F', 5) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('F', 10) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('F', 11) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('F', 12) ADI_ADSP_PINFUNC_ALT0>;
	};

	eth0_default: eth0_pins {
		adi,pins = <ADI_ADSP_PIN('A', 0) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('A', 1) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('A', 2) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('A', 3) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('A', 4) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('A', 5) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('A', 6) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('A', 7) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('A', 8) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('A', 9) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('A', 10) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('A', 11) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('A', 12) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('A', 13) ADI_ADSP_PINFUNC_ALT0>;
	};

	uart0_default: uart0_pins {
		bootph-pre-ram;
		adi,pins = <ADI_ADSP_PIN('C', 13) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('C', 14) ADI_ADSP_PINFUNC_ALT0>;
	};

	spi2_default: spi2_pins {
		adi,pins = <ADI_ADSP_PIN('C', 1) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('C', 2) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('C', 3) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('C', 4) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('C', 5) ADI_ADSP_PINFUNC_ALT0>,
					<ADI_ADSP_PIN('C', 6) ADI_ADSP_PINFUNC_ALT0>;
	};
};

&pinctrl0 {
	adi,npins = <102>;
};

&gpio0 {
	adi,ngpios = <102>;
};

&clk {
	compatible = "adi,sc58x-clocks";
};

&uart0 {
	clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
};

&spi2 {
	clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK1>;
	reg = <0x31044000 0x1000>;

	flash1: is25lp512@1 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor", "is25lp512";
		reg = <1>;
		spi-tx-bus-width = <4>;
		spi-rx-bus-width = <4>;
		spi-max-frequency = <10000000>;
		bootph-pre-ram;
	};
};

&wdog {
	clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
};

&eth0 {
	reg = <0x3100C000 0x1000>;
};

&mmc {
	clocks = <&dummy>, <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
};

&i2c0 {
	clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
};

&i2c1 {
	clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
};

&i2c2 {
	clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
};