// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
 */

/dts-v1/;

#include "glymur.dtsi"
#include "glymur-crd.dtsi"

#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>

/ {
	model = "Qualcomm Technologies, Inc. Glymur CRD";
	compatible = "qcom,glymur-crd", "qcom,glymur";

	pmic-glink {
		compatible = "qcom,glymur-pmic-glink",
			     "qcom,pmic-glink";
		#address-cells = <1>;
		#size-cells = <0>;

		connector@0 {
			compatible = "usb-c-connector";
			reg = <0>;
			power-role = "dual";
			data-role = "dual";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;

					pmic_glink_hs_in: endpoint {
						remote-endpoint = <&usb_0_dwc3_hs>;
					};
				};

				port@1 {
					reg = <1>;

					pmic_glink_ss_in: endpoint {
						remote-endpoint = <&usb_0_qmpphy_out>;
					};
				};
			};
		};

		connector@1 {
			compatible = "usb-c-connector";
			reg = <1>;
			power-role = "dual";
			data-role = "dual";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;

					pmic_glink_hs_in1: endpoint {
						remote-endpoint = <&usb_1_dwc3_hs>;
					};
				};

				port@1 {
					reg = <1>;

					pmic_glink_ss_in1: endpoint {
						remote-endpoint = <&usb_1_qmpphy_out>;
					};
				};
			};
		};
	};

	vreg_edp_3p3: regulator-edp-3p3 {
		compatible = "regulator-fixed";

		regulator-name = "VREG_EDP_3P3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&edp_reg_en>;
		pinctrl-names = "default";

		regulator-boot-on;
	};

	vreg_misc_3p3: regulator-misc-3p3 {
		compatible = "regulator-fixed";

		regulator-name = "VREG_MISC_3P3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&pmh0110_f_e0_gpios 6 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		pinctrl-0 = <&misc_3p3_reg_en>;
		pinctrl-names = "default";

		regulator-boot-on;
	};
};

&i2c0 {
	clock-frequency = <400000>;

	status = "okay";

	touchpad@2c {
		compatible = "hid-over-i2c";
		reg = <0x2c>;

		hid-descr-addr = <0x20>;
		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;

		vdd-supply = <&vreg_misc_3p3>;
		vddl-supply = <&vreg_l15b_e0_1p8>;

		pinctrl-0 = <&tpad_default>;
		pinctrl-names = "default";

		wakeup-source;
	};

	keyboard@3a {
		compatible = "hid-over-i2c";
		reg = <0x3a>;

		hid-descr-addr = <0x1>;
		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;

		vdd-supply = <&vreg_misc_3p3>;
		vddl-supply = <&vreg_l15b_e0_1p8>;

		pinctrl-0 = <&kybd_default>;
		pinctrl-names = "default";

		wakeup-source;
	};
};

&i2c8 {
	clock-frequency = <400000>;

	status = "okay";

	touchscreen@38 {
		compatible = "hid-over-i2c";
		reg = <0x38>;

		hid-descr-addr = <0x1>;
		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;

		vdd-supply = <&vreg_misc_3p3>;
		vddl-supply = <&vreg_l15b_e0_1p8>;

		pinctrl-0 = <&ts0_default>;
		pinctrl-names = "default";
	};
};

&i2c5 {
	clock-frequency = <400000>;

	status = "okay";

	ptn3222_0: redriver@43 {
		compatible = "nxp,ptn3222";
		reg = <0x43>;

		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;

		vdd3v3-supply = <&vreg_l8b_e0_1p50>;
		vdd1v8-supply = <&vreg_l15b_e0_1p8>;

		#phy-cells = <0>;
	};

	ptn3222_1: redriver@47 {
		compatible = "nxp,ptn3222";
		reg = <0x47>;

		reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;

		vdd3v3-supply = <&vreg_l8b_e0_1p50>;
		vdd1v8-supply = <&vreg_l15b_e0_1p8>;

		#phy-cells = <0>;
	};
};

&mdss {
	status = "okay";
};

&mdss_dp0 {
	status = "okay";
};

&mdss_dp0_out {
	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};

&mdss_dp1 {
	status = "okay";
};

&mdss_dp1_out {
	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};

&mdss_dp3 {
	/delete-property/ #sound-dai-cells;

	status = "okay";

	aux-bus {
		panel {
			compatible = "samsung,atna60cl08", "samsung,atna33xc20";
			enable-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
			power-supply = <&vreg_edp_3p3>;

			pinctrl-0 = <&edp_bl_en>;
			pinctrl-names = "default";

			port {
				edp_panel_in: endpoint {
					remote-endpoint = <&mdss_dp3_out>;
				};
			};
		};
	};
};

&mdss_dp3_out {
	data-lanes = <0 1 2 3>;
	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;

	remote-endpoint = <&edp_panel_in>;
};

&mdss_dp3_phy {
	vdda-phy-supply = <&vreg_l2f_e1_0p83>;
	vdda-pll-supply = <&vreg_l4f_e1_1p08>;

	status = "okay";
};

&pmh0110_f_e0_gpios {
	misc_3p3_reg_en: misc-3p3-reg-en-state {
		pins = "gpio6";
		function = "normal";
		bias-disable;
		input-disable;
		output-enable;
		drive-push-pull;
		power-source = <1>; /* 1.8 V */
		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
	};
};

&smb2370_j_e2_eusb2_repeater {
	vdd18-supply = <&vreg_l15b_e0_1p8>;
	vdd3-supply = <&vreg_l7b_e0_2p79>;
};

&smb2370_k_e2_eusb2_repeater {
	vdd18-supply = <&vreg_l15b_e0_1p8>;
	vdd3-supply = <&vreg_l7b_e0_2p79>;
};

&tlmm {
	edp_bl_en: edp-bl-en-state {
		pins = "gpio18";
		function = "gpio";
		drive-strength = <16>;
		bias-disable;
	};

	edp_reg_en: edp-reg-en-state {
		pins = "gpio70";
		function = "gpio";
		drive-strength = <16>;
		bias-disable;
	};

	kybd_default: kybd-default-state {
		pins = "gpio67";
		function = "gpio";
		bias-disable;
	};

	tpad_default: tpad-default-state {
		pins = "gpio3";
		function = "gpio";
		bias-disable;
	};

	ts0_default: ts0-default-state {
		int-n-pins {
			pins = "gpio51";
			function = "gpio";
			bias-disable;
		};

		reset-n-pins {
			pins = "gpio48";
			function = "gpio";
			drive-strength = <16>;
			bias-disable;
		};
	};
};

&usb_0 {
	dr_mode = "host";

	status = "okay";
};

&usb_0_dwc3_hs {
	remote-endpoint = <&pmic_glink_hs_in>;
};

&usb_0_hsphy {
	vdd-supply = <&vreg_l3f_e0_0p72>;
	vdda12-supply = <&vreg_l4h_e0_1p2>;

	phys = <&smb2370_j_e2_eusb2_repeater>;

	status = "okay";
};

&usb_0_qmpphy {
	vdda-phy-supply = <&vreg_l4h_e0_1p2>;
	vdda-pll-supply = <&vreg_l3f_e0_0p72>;
	refgen-supply = <&vreg_l2f_e0_0p82>;

	status = "okay";
};

&usb_0_qmpphy_out {
	remote-endpoint = <&pmic_glink_ss_in>;
};

&usb_1 {
	dr_mode = "host";

	status = "okay";
};

&usb_1_dwc3_hs {
	remote-endpoint = <&pmic_glink_hs_in1>;
};

&usb_1_hsphy {
	vdd-supply = <&vreg_l3f_e0_0p72>;
	vdda12-supply = <&vreg_l4h_e0_1p2>;

	phys = <&smb2370_k_e2_eusb2_repeater>;

	status = "okay";
};

&usb_1_qmpphy {
	vdda-phy-supply = <&vreg_l4h_e0_1p2>;
	vdda-pll-supply = <&vreg_l1h_e0_0p89>;
	refgen-supply = <&vreg_l2f_e0_0p82>;

	status = "okay";
};

&usb_1_qmpphy_out {
	remote-endpoint = <&pmic_glink_ss_in1>;
};

&usb_hs {
	status = "okay";
};

&usb_hs_phy {
	vdd-supply = <&vreg_l2h_e0_0p72>;
	vdda12-supply = <&vreg_l4h_e0_1p2>;

	phys = <&ptn3222_1>;

	status = "okay";
};

&usb_mp {
	status = "okay";
};

&usb_mp_hsphy0 {
	vdd-supply = <&vreg_l2h_e0_0p72>;
	vdda12-supply = <&vreg_l4h_e0_1p2>;

	phys = <&ptn3222_0>;

	status = "okay";
};

&usb_mp_hsphy1 {
	vdd-supply = <&vreg_l2h_e0_0p72>;
	vdda12-supply = <&vreg_l4h_e0_1p2>;

	status = "okay";
};

&usb_mp_qmpphy0 {
	vdda-phy-supply = <&vreg_l4h_e0_1p2>;
	vdda-pll-supply = <&vreg_l2h_e0_0p72>;
	refgen-supply = <&vreg_l4f_e1_1p08>;

	status = "okay";
};

&usb_mp_qmpphy1 {
	vdda-phy-supply = <&vreg_l4h_e0_1p2>;
	vdda-pll-supply = <&vreg_l2h_e0_0p72>;
	refgen-supply = <&vreg_l4f_e1_1p08>;

	status = "okay";
};