/*************************************************************************** * Copyright (c) 2024 Microsoft Corporation * Copyright (c) 2026-present Eclipse ThreadX contributors * * This program and the accompanying materials are made available under the * terms of the MIT License which is available at * https://opensource.org/licenses/MIT. * * SPDX-License-Identifier: MIT **************************************************************************/ /**************************************************************************/ /**************************************************************************/ /** */ /** USBX Component */ /** */ /** Device Printer Class */ /** */ /**************************************************************************/ /**************************************************************************/ #define UX_SOURCE_CODE /* Include necessary system files. */ #include "ux_api.h" #include "ux_device_class_printer.h" #include "ux_device_stack.h" /**************************************************************************/ /* */ /* FUNCTION RELEASE */ /* */ /* _ux_device_class_printer_read PORTABLE C */ /* 6.1.11 */ /* AUTHOR */ /* */ /* Chaoqiong Xiao, Microsoft Corporation */ /* */ /* DESCRIPTION */ /* */ /* This function reads from the Printer class. */ /* */ /* INPUT */ /* */ /* printer Address of printer class */ /* instance */ /* buffer Pointer to buffer to save */ /* received data */ /* requested_length Length of bytes to read */ /* actual_length Pointer to save number of */ /* bytes read */ /* */ /* OUTPUT */ /* */ /* None */ /* */ /* CALLS */ /* */ /* _ux_device_stack_transfer_request Transfer request */ /* _ux_utility_memory_copy Copy memory */ /* _ux_device_mutex_off Release mutex */ /* */ /* CALLED BY */ /* */ /* Application */ /* */ /**************************************************************************/ UINT _ux_device_class_printer_read(UX_DEVICE_CLASS_PRINTER *printer, UCHAR *buffer, ULONG requested_length, ULONG *actual_length) { UX_SLAVE_ENDPOINT *endpoint; UX_SLAVE_DEVICE *device; UX_SLAVE_TRANSFER *transfer_request; UINT status= UX_SUCCESS; ULONG local_requested_length; /* If trace is enabled, insert this event into the trace buffer. */ UX_TRACE_IN_LINE_INSERT(UX_TRACE_DEVICE_CLASS_PRINTER_READ, printer, buffer, requested_length, 0, UX_TRACE_DEVICE_CLASS_EVENTS, 0, 0) /* Get the pointer to the device. */ device = &_ux_system_slave -> ux_system_slave_device; /* As long as the device is in the CONFIGURED state. */ if (device -> ux_slave_device_state != UX_DEVICE_CONFIGURED) { /* Error trap. */ _ux_system_error_handler(UX_SYSTEM_LEVEL_THREAD, UX_SYSTEM_CONTEXT_CLASS, UX_CONFIGURATION_HANDLE_UNKNOWN); /* If trace is enabled, insert this event into the trace buffer. */ UX_TRACE_IN_LINE_INSERT(UX_TRACE_ERROR, UX_CONFIGURATION_HANDLE_UNKNOWN, device, 0, 0, UX_TRACE_ERRORS, 0, 0) /* Cannot proceed with command, the interface is down. */ return(UX_CONFIGURATION_HANDLE_UNKNOWN); } /* Locate the endpoint. */ endpoint = printer -> ux_device_class_printer_endpoint_out; /* Protect this thread. */ _ux_device_mutex_on(&printer -> ux_device_class_printer_endpoint_out_mutex); /* All Printer reading are on the endpoint OUT, from the host. */ transfer_request = &endpoint -> ux_slave_endpoint_transfer_request; #if (UX_DEVICE_ENDPOINT_BUFFER_OWNER == 1) && defined(UX_DEVICE_CLASS_PRINTER_ZERO_COPY) /* Check if device is configured. */ if (device -> ux_slave_device_state == UX_DEVICE_CONFIGURED) { /* Issue the transfer request. */ local_requested_length = requested_length; transfer_request -> ux_slave_transfer_request_data_pointer = buffer; status = _ux_device_stack_transfer_request(transfer_request, local_requested_length, local_requested_length); *actual_length = transfer_request -> ux_slave_transfer_request_actual_length; } #else /* Reset the actual length. */ *actual_length = 0; /* Check if we need more transactions. */ while (device -> ux_slave_device_state == UX_DEVICE_CONFIGURED && requested_length != 0) { /* Check if we have enough in the local buffer. */ if (requested_length > endpoint -> ux_slave_endpoint_descriptor.wMaxPacketSize) /* We have too much to transfer. */ local_requested_length = endpoint -> ux_slave_endpoint_descriptor.wMaxPacketSize; else /* We can proceed with the demanded length. */ local_requested_length = requested_length; /* Send the request to the device controller. */ status = _ux_device_stack_transfer_request(transfer_request, local_requested_length, local_requested_length); /* Check the status */ if (status == UX_SUCCESS) { /* We need to copy the buffer locally. */ _ux_utility_memory_copy(buffer, transfer_request -> ux_slave_transfer_request_data_pointer, transfer_request -> ux_slave_transfer_request_actual_length); /* Use case of memcpy is verified. */ /* Next buffer address. */ buffer += transfer_request -> ux_slave_transfer_request_actual_length; /* Set the length actually received. */ *actual_length += transfer_request -> ux_slave_transfer_request_actual_length; /* Decrement what left has to be done. */ requested_length -= transfer_request -> ux_slave_transfer_request_actual_length; /* Is this a short packet or a ZLP indicating we are done with this transfer ? */ if (transfer_request -> ux_slave_transfer_request_actual_length < endpoint -> ux_slave_endpoint_descriptor.wMaxPacketSize) { /* We are done. */ /* Free Mutex resource. */ _ux_device_mutex_off(&printer -> ux_device_class_printer_endpoint_out_mutex); /* Return with success. */ return(UX_SUCCESS); } } else { /* Free Mutex resource. */ _ux_device_mutex_off(&printer -> ux_device_class_printer_endpoint_out_mutex); /* We got an error. */ return(status); } } #endif /* Free Mutex resource. */ _ux_device_mutex_off(&printer -> ux_device_class_printer_endpoint_out_mutex); /* Check why we got here, either completion or device was extracted. */ if (device -> ux_slave_device_state != UX_DEVICE_CONFIGURED) { /* Error trap. */ _ux_system_error_handler(UX_SYSTEM_LEVEL_THREAD, UX_SYSTEM_CONTEXT_CLASS, UX_TRANSFER_NO_ANSWER); /* If trace is enabled, insert this event into the trace buffer. */ UX_TRACE_IN_LINE_INSERT(UX_TRACE_ERROR, UX_TRANSFER_NO_ANSWER, transfer_request, 0, 0, UX_TRACE_ERRORS, 0, 0) /* Device must have been extracted. */ return (UX_TRANSFER_NO_ANSWER); } else /* Simply return the last transaction result. */ return(status); } /**************************************************************************/ /* */ /* FUNCTION RELEASE */ /* */ /* _uxe_device_class_printer_read PORTABLE C */ /* 6.3.0 */ /* AUTHOR */ /* */ /* Yajun Xia, Microsoft Corporation */ /* */ /* DESCRIPTION */ /* */ /* This function checks errors in printer class read function */ /* */ /* INPUT */ /* */ /* printer Address of printer class */ /* instance */ /* buffer Pointer to buffer to save */ /* received data */ /* requested_length Length of bytes to read */ /* actual_length Pointer to save number of */ /* bytes read */ /* */ /* OUTPUT */ /* */ /* None */ /* */ /* CALLS */ /* */ /* _ux_device_class_printer_read Printer class read function */ /* */ /* CALLED BY */ /* */ /* Application */ /* */ /**************************************************************************/ UINT _uxe_device_class_printer_read(UX_DEVICE_CLASS_PRINTER *printer, UCHAR *buffer, ULONG requested_length, ULONG *actual_length) { /* Sanity checks. */ if ((printer == UX_NULL) || ((buffer == UX_NULL) && (requested_length > 0)) || (actual_length == UX_NULL)) { return (UX_INVALID_PARAMETER); } return (_ux_device_class_printer_read(printer, buffer, requested_length, actual_length)); }