Re-submit for WDI sample driver to GitHub

Submit WDI sample driver to GitHub for RS1.

1 files changed, 672 insertions, 0 deletions

diff --git a/network/wlan/WDI/COMMON/Debug.h b/network/wlan/WDI/COMMON/Debug.h
new file mode 100644
index 00000000..74cb1781
--- /dev/null
+++ b/network/wlan/WDI/COMMON/Debug.h
@@ -0,0 +1,672 @@
+#ifndef __INC_DEBUG_H
+#define __INC_DEBUG_H
+
+
+//-----------------------------------------------------------------------------
+//	Define the debug levels
+//
+//	1.	DBG_TRACE and DBG_LOUD are used for normal cases.
+//	So that, they can help SW engineer to develope or trace states changed 
+//	and also help HW enginner to trace every operation to and from HW, 
+//	e.g IO, Tx, Rx. 
+//
+//	2.	DBG_WARNNING and DBG_SERIOUS are used for unusual or error cases, 
+//	which help us to debug SW or HW.
+//
+//-----------------------------------------------------------------------------
+//
+//	Never used in a call to RT_TRACE()!
+//
+#define DBG_OFF					0
+
+//
+//	Deprecated! Don't use it! 
+//	TODO: fix related debug message!
+//
+//#define DBG_SEC					1
+
+//
+//	Fatal bug. 
+//	For example, Tx/Rx/IO locked up, OS hangs, memory access violation, 
+//	resource allocation failed, unexpected HW behavior, HW BUG and so on.
+//
+#define DBG_SERIOUS				2	// WPP Error condition
+
+//
+//	Abnormal, rare, or unexpeted cases.
+//	For example, IRP/Packet/OID canceled, device suprisely unremoved and so on.
+//
+#define DBG_WARNING			3	// WPP Warning
+
+//
+//	Normal case with useful information about current SW or HW state. 
+//	For example, Tx/Rx descriptor to fill, Tx/Rx descriptor completed status, 
+//	SW protocol state change, dynamic mechanism state change and so on.
+//
+#define DBG_LOUD				4	// WPP Information
+
+//
+//	Normal case with detail execution flow or information.
+//
+#define DBG_TRACE				5	//WPP most detailed trace
+
+
+#if WPP_SOFTWARE_TRACE
+
+
+//
+// Trace framework definition when WPP based tracing is enabled
+// Re-map WPP trace level in following DBG level, revised by Roger, 2014.02.11.
+//		
+//#define WPP_LEVEL_NONE				0
+//#define WPP_LEVEL_FATAL				1	// fatal error
+//#define WPP_LEVEL_ERROR				2	// error condition
+//#define WPP_LEVEL_WARNING			3	// warning
+//#define WPP_LEVEL_INFORMATION		4	// information
+//#define WPP_LEVEL_VERBOSE			5	// most detailed trace
+//
+
+//
+// These are the various tracing components we can have. The max number is 31
+// so always keep that in mind.
+//
+// WARNING! THIS GUID IS BEING USED BY THE SAMPLE DRIVER.
+// PLEASE GENERATE YOUR OWN UNIQUE GUID AND PLACE BELOW.
+//
+// Use COMP_TESTING when you want to add messages trace through a specific
+// piece of code and not want to see trace from all other components
+//
+#define WPP_CONTROL_GUIDS                                                   \
+	WPP_DEFINE_CONTROL_GUID(rtOriGuid1,(e62b367e,b2f0,4571,8c6a,3551a3a5a6b9), \
+		WPP_DEFINE_BIT(COMP_DBG)			\
+		WPP_DEFINE_BIT(COMP_INIT)			\
+		WPP_DEFINE_BIT(COMP_OID_QUERY)		\
+		WPP_DEFINE_BIT(COMP_OID_SET)		\
+		WPP_DEFINE_BIT(COMP_RECV)			\
+		WPP_DEFINE_BIT(COMP_SEND)			\
+		WPP_DEFINE_BIT(COMP_IO)				\
+		WPP_DEFINE_BIT(COMP_POWER)			\
+		WPP_DEFINE_BIT(COMP_MLME)			\
+		WPP_DEFINE_BIT(COMP_SCAN)			\
+		WPP_DEFINE_BIT(COMP_SYSTEM)			\
+		WPP_DEFINE_BIT(COMP_SEC)			\
+		WPP_DEFINE_BIT(COMP_AP)				\
+		WPP_DEFINE_BIT(COMP_QOS)			\
+		WPP_DEFINE_BIT(COMP_AUTHENTICATOR)	\
+		WPP_DEFINE_BIT(COMP_BEACON)			\
+		WPP_DEFINE_BIT(COMP_WFD)			\
+		WPP_DEFINE_BIT(COMP_RM)				\
+		WPP_DEFINE_BIT(COMP_MP)				\
+		WPP_DEFINE_BIT(COMP_CKIP)			\
+		WPP_DEFINE_BIT(COMP_RSNA)			\
+		WPP_DEFINE_BIT(COMP_INDIC)			\
+		WPP_DEFINE_BIT(COMP_LED)			\
+		WPP_DEFINE_BIT(COMP_RF)				\
+		WPP_DEFINE_BIT(COMP_COEX)			\
+	)	\
+	WPP_DEFINE_CONTROL_GUID(rtOriGuid2,(429ffa43,470c,40c2,b552,9cc23c2638ca), \
+		WPP_DEFINE_BIT(COMP_HT)				\
+		WPP_DEFINE_BIT(COMP_POWER_TRACKING)	\
+		WPP_DEFINE_BIT(COMP_RX_REORDER)		\
+		WPP_DEFINE_BIT(COMP_AMSDU)			\
+		WPP_DEFINE_BIT(COMP_WPS)			\
+		WPP_DEFINE_BIT(COMP_CMD)			\
+		WPP_DEFINE_BIT(COMP_EFUSE)			\
+		WPP_DEFINE_BIT(COMP_CCX)			\
+		WPP_DEFINE_BIT(COMP_IOCTL)			\
+		WPP_DEFINE_BIT(COMP_HVL)			\
+		WPP_DEFINE_BIT(COMP_TEST)			\
+		WPP_DEFINE_BIT(COMP_P2P)			\
+		WPP_DEFINE_BIT(COMP_TDLS)			\
+		WPP_DEFINE_BIT(COMP_OMNIPEEK)		\
+		WPP_DEFINE_BIT(COMP_MULTICHANNEL)	\
+		WPP_DEFINE_BIT(COMP_TCPCHECKSUM)	\
+		WPP_DEFINE_BIT(COMP_DUALMACSWITCH)	\
+		WPP_DEFINE_BIT(COMP_EASY_CONCURRENT)\
+		WPP_DEFINE_BIT(COMP_DFS)			\
+		WPP_DEFINE_BIT(COMP_TXPWR)			\
+		WPP_DEFINE_BIT(COMP_HAL_MAC_API)	\
+		WPP_DEFINE_BIT(COMP_NAN)			\
+	)	\
+	WPP_DEFINE_CONTROL_GUID(dbgCtrlGuid,(1bb4a286,2d36,463b,bee4,47d6ba05b5f8), \
+		WPP_DEFINE_BIT(COMP_DBG_MON)			\
+		WPP_DEFINE_BIT(COMP_TX_HANG)			\
+		WPP_DEFINE_BIT(COMP_RX_HANG)			\
+	)	\
+	WPP_DEFINE_CONTROL_GUID( halMacGuid,(9f9d9e5b,3854,4b87,8bc6,4ce1f284d34b), \
+		WPP_DEFINE_BIT(COMP_HALMAC_MSG_INIT) 	\
+		WPP_DEFINE_BIT(COMP_HALMAC_MSG_EFUSE)	\
+		WPP_DEFINE_BIT(COMP_HALMAC_MSG_FW)		\
+		WPP_DEFINE_BIT(COMP_HALMAC_MSG_H2C)		\
+		WPP_DEFINE_BIT(COMP_HALMAC_MSG_PWR)		\
+	)
+
+	#ifdef WPP_COMPID_LEVEL_ENABLED
+		#undef WPP_COMPID_LEVEL_ENABLED
+	#endif
+
+	#define WPP_COMPID_LEVEL_ENABLED(CTL,LEVEL)             \
+		((WPP_CONTROL(WPP_BIT_ ## CTL).Level >= LEVEL) &&   \
+		(WPP_CONTROL(WPP_BIT_ ## CTL).Flags[WPP_FLAG_NO(WPP_BIT_ ## CTL)] & WPP_MASK(WPP_BIT_ ## CTL)))
+
+	#ifndef WPP_COMPID_LEVEL_LOGGER
+		#define WPP_COMPID_LEVEL_LOGGER(CTL,LEVEL)      (WPP_CONTROL(WPP_BIT_ ## CTL).Logger),
+	#endif
+
+	#ifdef WPP_COMPID_ENABLED
+		#undef WPP_COMPID_ENABLED
+	#endif
+
+	#define WPP_COMPID_ENABLED(CTL)		\
+		(WPP_CONTROL(WPP_BIT_ ## CTL).Flags[WPP_FLAG_NO(WPP_BIT_ ## CTL)] & WPP_MASK(WPP_BIT_ ## CTL))
+
+	#ifndef WPP_COMPID_LOGGER
+		#define WPP_COMPID_LOGGER(CTL)	(WPP_CONTROL(WPP_BIT_ ## CTL).Logger),
+	#endif
+	
+#else // WPP_SOFTWARE_TRACE == 0
+
+
+//-----------------------------------------------------------------------------
+// Define the tracing components
+//
+//-----------------------------------------------------------------------------
+#define COMP_DBG				BIT0		// For function call tracing.
+#define COMP_INIT				BIT1	// during driver initialization / halt / reset.
+#define COMP_OID_QUERY			BIT2		// Query OID.
+#define COMP_OID_SET			BIT3		// Set OID.
+#define COMP_RECV				BIT4	// Reveive part data path.
+#define COMP_SEND				BIT5		// Send part path.
+#define COMP_IO					BIT6		// I/O Related. Added by Annie, 2006-03-02.
+#define COMP_POWER				BIT7		// 802.11 Power Save mode or System/Device Power state related.
+#define COMP_MLME				BIT8	// 802.11 link related: join/start BSS, leave BSS.
+#define COMP_SCAN				BIT9	// For site survey.
+#define COMP_SYSTEM			BIT10	// For general platform function.
+#define COMP_SEC				BIT11	// For Security.
+#define COMP_AP					BIT12	// For AP mode related.
+#define COMP_QOS				BIT13	// For QoS.
+#define COMP_AUTHENTICATOR	BIT14	// For AP mode Authenticator. Added by Annie, 2006-01-30.
+#define COMP_BEACON			BIT15	// For Beacon related, by rcnjko.
+#define COMP_WFD				BIT16	// WiFi Display
+#define COMP_RM					BIT17	// For Radio Measurement. 
+#define COMP_MP					BIT18	// For mass production test, by shien chang, 2006.07.13
+#define COMP_CKIP				BIT19	// For CCX 1 S13: CKIP. Added by Annie, 2006-08-14.
+#define COMP_RSNA				BIT20	// For RSNA IBSS , 061201, by CCW. 
+#define COMP_INDIC				BIT21	// For link indication
+#define COMP_LED				BIT22	// For LED.
+#define COMP_RF					BIT23	// For RF.
+
+//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
+//1//1Attention Please!!!<11n or 8190 specific code should be put below this line>
+//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+#define COMP_HT					BIT24	// For 802.11n HT related information. by Emily 2006-8-11
+#define COMP_POWER_TRACKING	BIT25	//FOR 8190 TX POWER TRACKING
+#define COMP_RX_REORDER		BIT26	// 8190 Rx Reorder
+#define COMP_AMSDU				BIT27	// For A-MSDU Debugging
+#define COMP_WPS				BIT28   //WPS Debug Message 
+#define COMP_CMD				BIT29
+#define COMP_EFUSE				BIT30
+#define COMP_CCX				BIT31	//CCX Debug Flag
+#define COMP_IOCTL				BIT32	// IO Control
+#define COMP_HVL                           BIT33     // For Ndis 6.2 Context Swirch and Hardware Virtualiztion Layer
+#define COMP_TEST				BIT34
+#define COMP_P2P				BIT35
+#define COMP_TDLS				BIT36
+#define COMP_OMNIPEEK			BIT37
+#define COMP_MULTICHANNEL		BIT38
+#define COMP_TCPCHECKSUM		BIT39
+#define COMP_DUALMACSWITCH	BIT40	// 2010/12/27 Add for Dual mac mode debug
+#define COMP_EASY_CONCURRENT	BIT41	// 2010/12/27 Add for easy cncurrent mode debug
+#define COMP_DFS				BIT42
+#define COMP_COEX				BIT43
+#define	COMP_TXPWR				BIT44
+#define COMP_HAL_MAC_API		BIT46
+#define COMP_NAN				BIT47
+
+#define COMP_ALL				UINT64_C(0xFFFFFFFFFFFFFFFF) // All components
+
+
+// ==============================
+//	for dbgCtrlGuid
+//	(1bb4a286,2d36,463b,bee4,47d6ba05b5f8)
+// ==============================
+#define	COMP_DBG_MON			BIT0
+#define	COMP_TX_HANG			BIT1
+#define	COMP_RX_HANG			BIT2
+
+// ==============================
+//	for halMacGuid
+//	{9F9D9E5B-3854-4B87-8BC6-4CE1F284D34B}
+// ==============================
+#define	COMP_HALMAC_MSG_INIT 	BIT0
+#define	COMP_HALMAC_MSG_EFUSE 	BIT1
+#define	COMP_HALMAC_MSG_FW		BIT2
+#define	COMP_HALMAC_MSG_H2C		BIT3
+#define	COMP_HALMAC_MSG_PWR		BIT4
+
+#endif
+
+
+// For debug print flag to use
+/*------------------------------Define structure----------------------------*/
+/* 2007/07/13 MH  *//*------For DeBuG Print modeue------*/
+
+/* Defnie structure to store different debug flag variable. Every debug flag 
+     is a UINT32 integer and you can assign 32 different events. */
+typedef struct tag_DBGP_Debug_Flag_Structure
+{
+	UINT32	Mans;			/* Main Scheduler module. */
+	UINT32	Rtos;			/* RTOS module. */
+	UINT32	Alarm;		/* Alarm module. */	
+	UINT32	Pm;			/* Performance monitor module. */	
+}DBGP_FLAG_T;
+
+/* Define debug print header for every service module.*/
+typedef struct tag_DBGP_Service_Module_Header_Name_Structure
+{
+	const char 	*pMANS;
+	const char 	*pRTOS;
+	const char 	*pALM;
+	const char 	*pPEM;
+	const char 	*pCMPK;
+	const char 	*pRAPD;
+	const char 	*pTXPB;
+	const char 	*pQUMG;
+}DBGP_HEAD_T;
+
+
+/* Define different debug flag for dedicated service modules in debug flag array. */
+// Each module has independt 32 bit debug flag you cnn define the flag as yout require.
+typedef enum tag_DBGP_Flag_Type_Definition
+{
+	FQoS				= 0,	
+	FTX					= 1,
+	FRX					= 2,	
+	FSEC				= 3,
+	FMGNT				= 4,
+	FMLME				= 5,
+	FRESOURCE			= 6,
+	FBEACON				= 7,
+	FISR				= 8,
+	FPHY				= 9,
+	FMP					= 10,
+	FEEPROM				= 11,
+	FPWR				= 12,
+	FDM					= 13,
+	FDBG_CTRL			= 14,
+	FC2H				= 15,
+	FBT					= 16,
+	FINIT				= 17,
+	FIOCTL				= 18,
+	FSHORT_CUT			= 19,
+	FBATCH_INDICATION	= 20,
+	FTCPREORDER			= 21,
+	FIOTHREAD			= 22,
+	FFW 				= 23,
+	FMPBT				= 24,
+	FRW_POINT			= 25,
+	FBEAM				= 26,
+	FMPHAL				= 27,
+	FACTION_TIMER		= 28,
+	FHAL_MAC_ID			= 29,
+	FCHNL				= 30,
+	FCCX				= 31,
+	FUSWITCH			= 32,
+	DBGP_TYPE_MAX
+}DBGP_FLAG_E;
+
+
+// Define Qos Relative debug flag bit		--> FQoS
+#define		QoS_INIT			BIT0
+#define		QoS_VISTA			BIT1
+
+// Define TX relative debug bit				--> FTX
+#define		TX_DESC			BIT0
+#define		TX_DESC_TID		BIT1
+#define		TX_PATH			BIT2
+
+// Define RX relative debug  bit				--> FRX
+#define		RX_DATA				BIT0	
+#define		RX_PHY_STS				BIT1
+#define		RX_PHY_SS				BIT2
+#define		RX_PHY_SQ				BIT3
+#define		RX_PHY_ASTS			BIT4
+#define		RX_ERR_LEN			BIT5
+#define		RX_DEFRAG			BIT6
+#define		RX_ERR_RATE			BIT7
+#define		RX_PATH				BIT8
+#define		RX_BEACON				BIT9
+#define		RX_PATH_AP_MODE		BIT10
+#define		RX_PATH_ADDR			BIT11
+
+// Define Security relative debug  bit			--> FSEC
+
+// Define MGNT relative debug bit			--> FMGNT
+
+// Define MLME relative debug bit				--> FMLME
+#define		MEDIA_STS			BIT0
+#define		LINK_STS			BIT1
+
+// Define OS resource check module bit		--> FRESOURCE
+#define		OS_CHK				BIT0
+
+// Define beacon content check module bit		--> FBEACON
+#define		BCN_SHOW			BIT0
+#define		BCN_PEER			BIT1
+
+// Define ISR/IMR check module bit		--> FISR
+#define		ISR_CHK				BIT0
+
+// Define PHY-BB/RF/MAC check module bit		--> FPHY
+#define		PHY_BBR				BIT0
+#define		PHY_BBW				BIT1
+#define		PHY_RFR				BIT2
+#define		PHY_RFW				BIT3
+#define		PHY_MACR				BIT4
+#define		PHY_MACW				BIT5
+#define		PHY_ALLR				BIT6
+#define		PHY_ALLW				BIT7
+#define		PHY_TXPWR				BIT8
+#define		PHY_PWRDIFF			BIT9
+#define		PHY_SICR				BIT10
+#define		PHY_SICW				BIT11
+#define		PHY_TXPWR_EFUSE			BIT12
+
+// Define MPT driver check module bit		--> FMP
+#define		MP_RX					BIT0
+#define		MP_SWICH_CH			BIT1
+
+// Define EEPROM and EFUSE  check module bit		--> FEEPROM
+#define		EEPROM_W					BIT0
+#define		EFUSE_PG					BIT1
+#define		EFUSE_READ_ALL			BIT2
+#define		EFUSE_ANALYSIS				BIT3
+#define		EFUSE_PG_DETAIL			BIT4
+
+// Define power save  check module bit		--> FPWR
+#define		LPS					BIT0
+#define		IPS					BIT1
+#define		PWRSW				BIT2
+#define		PWRHW				BIT3
+#define		PWRHAL				BIT4
+
+// Define Dynamic Mechanism check module bit		--> FDM
+#define		WA_IOT				BIT0
+#define		DM_PWDB			BIT1
+#define		DM_Monitor			BIT2
+#define		DM_DIG				BIT3
+#define		DM_EDCA_Turbo		BIT4
+#define		DM_BT30			BIT5
+
+// Define Dbg Control module bit		--> FDBG_CTRL
+#define		DBG_CTRL_TRACE			BIT0
+#define		DBG_CTRL_INBAND_NOISE	BIT1
+
+// Define FW C2H Cmd check module bit		--> FC2H
+#define		C2H_Summary				BIT0
+#define		C2H_PacketData				BIT1
+#define		C2H_ContentData			BIT2
+// Define BT Cmd check module bit		--> FBT
+#define		BT_TRACE					BIT0
+#define		BT_DBG_STATE				BIT1
+#define		BT_DBG_CONTENT				BIT2
+#define		BT_H2C_STATE				BIT3
+#define		BT_NOTIFY_EVENT				BIT4
+#define		BT_DBG_CTRL					BIT5
+
+// Define init check for module bit		--> FINIT
+#define		INIT_EEPROM				BIT0
+#define		INIT_TxPower				BIT1
+#define		INIT_IQK					BIT2
+#define		INIT_RF						BIT3
+
+// Define IOCTL Cmd check module bit		--> FIOCTL
+// section 1 : IRP related
+#define		IOCTL_IRP						BIT0
+#define		IOCTL_IRP_DETAIL				BIT1
+#define		IOCTL_IRP_HANDLE				BIT2
+// section 2 : HCI command/event
+#define		IOCTL_BT_HCICMD				BIT8
+#define		IOCTL_BT_HCICMD_DETAIL		BIT9
+#define		IOCTL_BT_HCICMD_EXT			BIT10
+#define		IOCTL_BT_EVENT					BIT11
+#define		IOCTL_BT_EVENT_DETAIL			BIT12
+#define		IOCTL_BT_EVENT_PERIODICAL		BIT13
+// section 3 : BT tx/rx data and throughput
+#define		IOCTL_BT_TX_ACLDATA			BIT16
+#define		IOCTL_BT_TX_ACLDATA_DETAIL	BIT17
+#define		IOCTL_BT_RX_ACLDATA			BIT18
+#define		IOCTL_BT_RX_ACLDATA_DETAIL	BIT19
+#define		IOCTL_BT_TP					BIT20
+// section 4 : BT connection state machine.
+#define 		IOCTL_STATE					BIT21	
+#define		IOCTL_BT_LOGO					BIT22
+#define		IOCTL_BT_MGNT_PACKET			BIT23
+// section 5 : BT function trace
+#define		IOCTL_CALLBACK_FUN			BIT24
+#define		IOCTL_PARSE_BT_PKT			BIT25
+#define		IOCTL_BT_TX_PKT				BIT26
+#define		IOCTL_BT_FLAG_MON				BIT27
+
+//
+// Define init check for module bit		--> FSHORT_CUT
+// 2011/07/20 MH Add for short but definition.
+//
+#define		SHCUT_TX				BIT0
+#define		SHCUT_RX				BIT1
+//
+// Define init check for module bit		--> FBATCH_INDICATION
+// 2011/09/28 Sinda Add for batch indication definition.
+//
+#define		INDICATE_TRACE				BIT0
+
+
+//
+// Define init check for module bit		--> FTCPREORDER
+// 2012/01/10 hpfan Add for Tcp Reorder definition
+//
+#define		SEQ_TRACE						BIT0
+#define		REORDER_TRACE					BIT1
+#define		INIT_TRACE						BIT2
+
+//
+// Define init check for module bit		--> FIOTHREAD
+// 2012/01/04 Cosa Add for io thread definition.
+//
+#define		IOTHREAD_INIT				BIT0
+#define		IOTHREAD_Q_OP				BIT1
+#define		IOTHREAD_STATE				BIT2
+#define		IOTHREAD_H2C				BIT3
+
+//
+// Define init check for module bit		--> FFW
+// 2012/01/12 Cosa Add for Firmware definition.
+//
+#define		FW_MSG_INIT					BIT0
+#define		FW_MSG_Q_OP					BIT1
+#define		FW_MSG_H2C_STATE			BIT2
+#define		FW_MSG_H2C_CONTENT			BIT3
+#define		FW_MSG_RSVD					BIT4
+
+//
+// Define init check for module bit		--> FMPBT
+// 2012/03/01 Cosa Add for BT MP.
+//
+#define		FMPBT_CONTENT						BIT0
+#define		FMPBT_STATE							BIT1
+#define		FMPBT_H2C_CONTENT					BIT2
+#define		FMPBT_H2C_STATE						BIT3
+#define		FMPBT_C2H_CONTENT					BIT4
+#define		FMPBT_C2H_STATE						BIT5
+
+#define		FMPHAL_CONTENT						BIT0
+#define		FMPHAL_STATE						BIT1
+
+//
+// Define 8192ee Read Write point related bit	--> FRW_POINT
+// 2012/03/01 Cosa Add for BT MP.
+//
+#define		FRW_POINT_TX					BIT0
+#define		FRW_POINT_TX_DATA				BIT1
+#define		FRW_POINT_RX					BIT2
+#define		FRW_POINT_RX_DATA			BIT3
+#define		FRW_POINT_DBG					BIT4
+
+#define		FBEAM_FUN						BIT0
+#define		FBEAM_ERROR					BIT1
+#define		FBEAM_DATA					BIT2
+
+//
+// Define ACTION_TIMER Debug Information	--> FACTION_TIMER
+//
+#define		COMP_ACTION_TIMER_LIFE		BIT0
+#define		COMP_ACTION_TIMER_ITEM		BIT1
+
+//
+// Define HAL_MAC_ID Debug Information	--> FHAL_MAC_ID
+//
+#define		COMP_MAC_ID					BIT0
+
+//
+// Define CHANNEL Debug Information	--> FCHNL
+//
+#define		FCHNL_FUN					BIT0
+#define		FCHNL_ERROR				BIT1
+#define		FCHNL_INFO					BIT2
+
+//
+// Define CCX Debug Information	--> FCCX
+//
+#define		CCX_CELLPWRLMT			BIT0
+#define		CCX_RM						BIT1
+#define		CCX_CAC					BIT2
+
+#define		FUSWITCH_FUN				BIT0
+#define		FUSWITCH_ERROR			BIT1
+#define		FUSWITCH_INFO				BIT2
+
+/* 2007/07/13 MH  *//*------For DeBuG Print modeue------*/
+/*------------------------------Define structure----------------------------*/
+
+
+/*------------------------Export Marco Definition---------------------------*/
+#define		DEBUG_PRINT				1
+
+// Please add new OS's print API by yourself
+
+#if (DEBUG_PRINT == 1) && DBG
+#define	RT_DISP(dbgtype, dbgflag, printstr)\
+{\
+	if (DBGP_Type[dbgtype] & dbgflag)\
+	{\
+		DbgPrint printstr;\
+	}\
+}
+
+#define	RT_DISP_F(dbgtype, dbgflag, printstr)\
+{\
+	if (DBGP_Type[dbgtype] & dbgflag)\
+	{\
+		DbgPrint("%s(): ", __FUNCTION__);\
+		DbgPrint printstr;\
+	}\
+}
+
+#define	RT_DISP_ADDR(dbgtype, dbgflag, printstr, _Ptr)\
+{\
+	if (DBGP_Type[dbgtype] & dbgflag)\
+	{\
+				int __i;						\
+				pu1Byte	ptr = (pu1Byte)_Ptr;	\
+				DbgPrint printstr;				\
+				DbgPrint(" ");					\
+				for( __i=0; __i<6; __i++ )		\
+					DbgPrint("%02X%s", ptr[__i], (__i==5)?"":"-");		\
+				DbgPrint("\n");							\
+	}\
+}
+
+#define 	RT_DISP_DATA(dbgtype, dbgflag, _TitleString, _HexData, _HexDataLen)\
+{\
+	if (DBGP_Type[dbgtype] & dbgflag)\
+	{\
+		int __i;									\
+		pu1Byte	ptr = (pu1Byte)_HexData;			\
+		DbgPrint(_TitleString);					\
+		for( __i=0; __i<(int)_HexDataLen; __i++ )	\
+		{										\
+			DbgPrint("%02X%s", ptr[__i], (((__i + 1) % 4) == 0)?"  ":" ");\
+			if (((__i + 1) % 16) == 0)	DbgPrint("\n");\
+		}										\
+		DbgPrint("\n");							\
+	}\
+}
+
+#define 	FunctionIn(_comp)		RT_TRACE((_comp), DBG_LOUD, ("==========> %s\n",  __FUNCTION__))
+#define 	FunctionOut(_comp)		RT_TRACE((_comp), DBG_LOUD, ("<========== %s\n",  __FUNCTION__))
+
+#else
+
+#define	RT_DISP(dbgtype, dbgflag, printstr)
+#define	RT_DISP_F(dbgtype, dbgflag, printstr)
+
+#define	RT_DISP_ADDR(dbgtype, dbgflag, printstr, _Ptr)
+#define 	RT_DISP_DATA(dbgtype, dbgflag, _TitleString, _HexData, _HexDataLen)
+
+#define 	FunctionIn(_comp)
+#define 	FunctionOut(_comp)
+#endif
+/*------------------------Export Marco Definition---------------------------*/
+
+
+/*------------------------Export global variable----------------------------*/
+extern	UINT32			DBGP_Type[DBGP_TYPE_MAX];
+extern	DBGP_HEAD_T	DBGP_Head;
+
+/*------------------------Export global variable----------------------------*/
+
+
+/*--------------------------Exported Function prototype---------------------*/
+extern	void	DBGP_Flag_Init(void);
+extern	void	DBG_PrintAllFlag(void);
+extern	void	DBG_PrintFlagEvent(UINT8	DbgFlag);
+
+/*--------------------------Exported Function prototype---------------------*/
+
+
+
+
+
+
+
+
+
+extern u4Byte GlobalDebugLevel;
+extern u8Byte GlobalDebugComponents;
+extern u4Byte GLDebugComponents;
+extern u4Byte HalMacDebugComponents;
+
+
+
+//=================================================================
+// Debugging for System Resources
+//=================================================================
+
+
+// + Debugging for Timer Resources ------------------------------------------------------------------
+#define	DEBUG_RESOURCE_TIMER		0
+
+
+#define DebugResourceTimerCreateTimerMirror(_pAdapter, _uStorageIndex, _pTimer)
+#define DebugResourceTimerReleaseTimerMirror(_pAdapter, _pTimer)
+#define DebugResourceTimerDumpUnreleasedTimer(_pAdapter)
+
+//-----------------------------------------------------------------------------------------------
+
+
+
+
+//=================================================================
+
+#endif //#ifndef __INC_DEBUG_H