Initial publish

1 files changed, 201 insertions, 0 deletions

diff --git a/pofx/UMDF2/App/UserInput.cpp b/pofx/UMDF2/App/UserInput.cpp
new file mode 100644
index 00000000..dcd3ca75
--- /dev/null
+++ b/pofx/UMDF2/App/UserInput.cpp
@@ -0,0 +1,201 @@
+#include "include.h"
+
+
+// 
+// The supported settings with their default values.
+//
+CONFIGURATION g_UserSettings[] = {
+    {COMPONENT           ,0},
+    {MAX_OUTSTANDING_IO  ,1},
+    {DELAY               ,0},
+    {CANCEL              ,0}
+};
+
+DWORD
+ProcessUserInput(
+    _In_ int argc,
+    _In_reads_(argc) PWSTR argv[]
+    )
+{
+    DWORD err = ERROR_SUCCESS;
+
+    for (int i=1; i < argc; i++)
+    {
+        PWSTR arg = argv[i];
+        
+        //
+        // Setting must begin with / or -
+        //
+        if (arg[0] != L'-' && arg[0] != L'/')
+        {
+            printf("\n Invalid command-line argument %ws. \n", arg);
+            err = ERROR_INVALID_PARAMETER;
+            goto clean0;
+        }
+
+        if (L'?' == arg[1])
+        {
+            err = ERROR_INVALID_PARAMETER;
+            goto clean0;
+        }
+        
+        //
+        // Setting must contain ':' as the seperator.
+        //  
+        PWSTR settingName = arg + 1;
+        PWSTR settingValue = NULL;
+        PWSTR seperator = wcschr(settingName, L':');
+        if (seperator == NULL)
+        {
+            printf("\n Invalid command-line argument %ws. \n", arg);            
+            err = ERROR_INVALID_PARAMETER;
+            goto clean0;
+        }
+
+        settingValue = seperator + 1;            
+        *seperator = L'\0';
+
+        //
+        // Store the value of the setting in the appropriate location.
+        //
+        err = ProcessSwitch(settingName, settingValue);
+        if (err != ERROR_SUCCESS)
+        {
+            goto clean0;
+        }     
+    }
+    
+clean0:
+
+    if (ERROR_SUCCESS != err)
+    {
+        PrintUsage(argv);
+    }
+    return err;
+}
+
+
+PCONFIGURATION
+LookupSwitch(
+    _In_ PWSTR Param)
+{
+    for (UINT i=0; i < COUNT_OF(g_UserSettings); i++)
+    {
+        if (_wcsicmp(Param, g_UserSettings[i].Option) == 0)
+        {
+            return &g_UserSettings[i];
+        }
+    }
+
+    return NULL;
+}
+
+ULONG
+GetSetting(
+    _In_ PWSTR Switch)
+{
+    return LookupSwitch(Switch)->Value;
+}
+
+DWORD
+ProcessSwitch(
+    _In_ PWSTR Param,
+    _In_ PWSTR Value)
+{
+    PCONFIGURATION config;
+
+    config = LookupSwitch(Param);
+    if (NULL == config)
+    {
+        printf("\n '%ws' is not a valid switch", Param);
+        return ERROR_INVALID_PARAMETER;
+    }
+    
+    if (0 == _wcsicmp(Param, COMPONENT))
+    {
+        if (0 == _wcsicmp(Value, L"*"))
+        {
+            config->Value = RANDOM_COMPONENT;
+        }
+        else
+        {            
+            config->Value = _wtoi(Value);
+            if (config->Value >= COMPONENT_COUNT)
+            {
+                printf("Invalid component count '%ws' specified. "
+                    "Component count must be less than %d. \n", Value, COMPONENT_COUNT);
+                return ERROR_INVALID_PARAMETER;
+            }            
+        }
+
+    }
+    else if (0 == _wcsicmp(Param, CANCEL))
+    {
+        if (0 == _wcsicmp(Value, L"yes"))
+        {
+            config->Value = TRUE;
+        }
+        else if (0 == _wcsicmp(Value, L"no"))
+        {
+            config->Value = FALSE;
+        }
+        else
+        {
+            printf("'%ws' is not a valid option for '%ws'. Must be 'yes' or 'no'. \n", 
+                Value, Param);
+            return ERROR_INVALID_PARAMETER;            
+        }
+    }
+    else
+    {
+        //
+        // For MaxOutstandingIo or Delay this is sufficient.
+        //
+        config->Value = _wtoi(Value);        
+        if (0 == config->Value)
+        {
+            printf("'%ws' is not a valid option for '%ws'", Value, Param);
+            return ERROR_INVALID_PARAMETER;
+        }
+    }
+
+    return ERROR_SUCCESS;
+}
+
+
+void PrintUsage(
+    _In_ PWSTR argv[]
+    )
+{
+    printf("\n This application can be used to send IO requests to a specified component");
+    printf("\n of the WDF Power Fx sample driver. The requests will be sent indefinitely ");
+    printf("\n until a request fails or the user terminates the execution with ^C");
+    printf("\n More details on the driver and application are in the associated help file.");
+    printf("\n ");    
+    printf("\n Usage:");
+    printf("\n %ws [/<SettingName>:<SettingValue> ...]", argv[0]);
+    printf("\n ");
+    printf("\n Available settings are:");
+    printf("\n ");    
+    printf("\n /Component:<Number>");
+    printf("\n Where <Number> can be a specific component number, or if you are running with");
+    printf("\n the multi-component sample driver you can specify '*'(without quotes) and ");
+    printf("\n each request will be sent to a random component between 0 and ");
+    printf("\n (COMPONENT_COUNT-1). Default value is component 0.");    
+    printf("\n ");
+    printf("\n /Delay:<DelayInMilliSeconds>");
+    printf("\n There is an approximate delay between 0 and <DelayInMilliSeconds> ms");
+    printf("\n between each request. Default value is 0 (no delay).");
+    printf("\n ");
+    printf("\n /MaxOutstandingIO:<NumberOfRequests>");
+    printf("\n The maximum number of I/O requests that can be outstanding at any point.");
+    printf("\n Default value is 1 (equivalent to synchronously sending requests).");
+    printf("\n ");
+    printf("\n /Cancel:<YesNo>");
+    printf("\n Can be 'yes' or 'no' (without quotes).");
+    printf("\n When set to 'yes' the application will attempt to cancel the requests once ");
+    printf("\n sent. Default value is 'no'.");
+    printf("\n ");
+    return;
+}
+