diff options
| -rw-r--r-- | .github/crashdetect/CrashDetectSetupGuide.md | 90 |
1 files changed, 45 insertions, 45 deletions
diff --git a/.github/crashdetect/CrashDetectSetupGuide.md b/.github/crashdetect/CrashDetectSetupGuide.md index 88f7a3b7..fd351487 100644 --- a/.github/crashdetect/CrashDetectSetupGuide.md +++ b/.github/crashdetect/CrashDetectSetupGuide.md @@ -106,8 +106,8 @@ Install WinPE Add-on: <br>**Important:** Install **ADK first**, then WinPE add-o - **TIP:** It's a good idea to make a backup copy of the original **"winpe.wim"** image file before editing it in the following steps. - `C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Windows Preinstallation Environment\amd64\en-us\winpe.wim` -- Plug a USB into the Host Controller. -- Check to make sure drive letters **A:** and **B:** are not currently used by any other drive. If used by the target USB, it's okay. +- Plug a USB drive into the Host Controller. +- Check to make sure drive letters **A:** and **B:** are not currently used by any other drive. If used by the target USB drive, it's okay. - Confirm the folder **`C:\WinPE_USB`** and its subfolders **`Scripts`** and **`Images`** exist. - Confirm the **`Scripts`** subfolder contains the following files that were downloaded from previous steps. - `CrashDetectOsReinstall.cmd` @@ -122,9 +122,9 @@ Install WinPE Add-on: <br>**Important:** Install **ADK first**, then WinPE add-o ```cmd C:\WinPE_USB\Scripts\CrashDetectCreateUsb.cmd ``` -- The script will display a list of detected disk drives, usually Disk 0 is the OS disk, do not select that disk. +- The script will display a list of detected disk drives, usually Disk 0 is the OS disk, DO NOT select that disk. - Prompt 1: will ask you to enter the Disk number of your USB drive. -- Prompt 2: will confirm one last time before wiping out the USB drive. +- Prompt 2: will ask you to confirm one last time before wiping out the USB drive. - The last step will copy over the `install.wim` OS image to the USB, which could take a while. ### OPTION 2: Follow the steps below to create the USB manually. @@ -134,58 +134,56 @@ C:\WinPE_USB\Scripts\CrashDetectCreateUsb.cmd #### 2. Update the `startnet.cmd` autorun script in the WinPE boot image. - Mount the WinPE boot image (`winpe.wim`) using DISM. -``` - Adds the `CrashDetectOsReinstall.cmd` script to the `startnet.cmd` script. -```text - ( - echo wpeinit - echo. - echo @echo off - echo REM Find USB drive. - echo for %%D in (D E F G H I J K L M N O P Q R S T U V W Y Z^) do ^( - echo if exist %%D:Scripts\CrashDetectOsReinstall.cmd ^( - echo call %%D:Scripts\CrashDetectOsReinstall.cmd - echo goto EOF - echo ^) - echo ^) - ) > "C:\WinPE_USB\WinPE_amd64\mount\Windows\System32\startnet.cmd" +```cmd +( +echo wpeinit +echo. +echo @echo off +echo REM Find USB drive. +echo for %%D in (D E F G H I J K L M N O P Q R S T U V W Y Z^) do ^( +echo if exist %%D:Scripts\CrashDetectOsReinstall.cmd ^( +echo call %%D:Scripts\CrashDetectOsReinstall.cmd +echo goto EOF +echo ^) +echo ^) +) > "C:\WinPE_USB\WinPE_amd64\mount\Windows\System32\startnet.cmd" ``` - Unmount the WinPE image using DISM. -```text - Dism /Unmount-Image /MountDir:"C:\WinPE_USB\WinPE_amd64\mount" /commit +```cmd +Dism /Unmount-Image /MountDir:"C:\WinPE_USB\WinPE_amd64\mount" /commit ``` - Delete folder `C:\WinPE_USB\WinPE_amd64`, else the `copype.cmd` below will fail if the folder is already present. -```text - rmdir /s /q "C:\WinPE_USB\WinPE_amd64" +```cmd +rmdir /s /q "C:\WinPE_USB\WinPE_amd64" ``` #### 3. Create and format a multiple partition USB drive. - - [Create a multiple partition USB drive](https://learn.microsoft.com/en-us/windows-hardware/manufacture/desktop/winpe--use-a-single-usb-key-for-winpe-and-a-wim-file---wim#option-1-create-a-multiple-partition-usb-drive) - Attach a USB large enough for 2GB WinPE partition + WinUSB partition (Win11 WIM 8GB + Memory dump files 16GB-64GB + Scripts). - - Follow instructions for Option 1 on the following website to partition and format your USB drive. -```txt - diskpart - list disk - select disk X (where X is your USB drive) - clean - create partition primary size=2048 - active - format fs=FAT32 quick label="WinPE" - assign letter=A - create partition primary - format fs=NTFS quick label="WinUSB" - assign letter=B - exit + - Enter the following commands into the command prompt. +```cmd +diskpart +list disk +select disk X (where X is your USB drive) +clean +create partition primary size=2048 +active +format fs=FAT32 quick label="WinPE" +assign letter=A +create partition primary +format fs=NTFS quick label="WinUSB" +assign letter=B +exit ``` #### 4. Create a bootable Windows PE USB drive. - Copying WinPE boot files to a working directory. -```txt - copype.cmd amd64 "C:\WinPE_USB\WinPE_amd64" +```cmd +copype.cmd amd64 "C:\WinPE_USB\WinPE_amd64" ``` - Copy the WinPE files to the WinPE partition on USB. -```txt - MakeWinPEMedia.cmd /UFD /F "C:\WinPE_USB\WinPE_amd64" "A:" /bootex +```cmd +MakeWinPEMedia.cmd /UFD /F "C:\WinPE_USB\WinPE_amd64" "A:" /bootex ``` --- @@ -193,12 +191,12 @@ C:\WinPE_USB\Scripts\CrashDetectCreateUsb.cmd #### 5. Copy scripts and OS install image over to WinUSB partition on USB. - Copy Script files over to USB. -```txt - xcopy "C:\WinPE_USB\Scripts\" "B:\Scripts\" /E /I /R /Y +```cmd +xcopy "C:\WinPE_USB\Scripts\" "B:\Scripts\" /E /I /R /Y ``` - Copy Windows 11 OS WIM file over to USB, this could take a while... -```txt - robocopy "C:\WinPE_USB\Images" "B:\Images" install.wim /ETA /J +```cmd +robocopy "C:\WinPE_USB\Images" "B:\Images" install.wim /ETA /J ``` --- @@ -259,5 +257,7 @@ C:\WinPE_USB\Scripts\CrashDetectCreateUsb.cmd ## Reference Documentation - [WinPE overview](https://learn.microsoft.com/en-us/windows-hardware/manufacture/desktop/winpe-intro) +- [Create a USB drive with WinPE and data partitions](https://learn.microsoft.com/en-us/windows-hardware/manufacture/desktop/winpe--use-a-single-usb-key-for-winpe-and-a-wim-file---wim#create-a-usb-drive-with-winpe-and-data-partitions) - [WinPE: Create bootable media](https://learn.microsoft.com/en-us/windows-hardware/manufacture/desktop/winpe-create-usb-bootable-drive) - [Capture and apply Windows (WIM)](https://learn.microsoft.com/en-us/windows-hardware/manufacture/desktop/capture-and-apply-windows-using-a-single-wim) +- [Answer files (unattend.xml)](https://learn.microsoft.com/en-us/windows-hardware/manufacture/desktop/update-windows-settings-and-scripts-create-your-own-answer-file-sxs)
\ No newline at end of file |