diff options
Diffstat (limited to 'audio/sysvad/EndpointsCommon/micarraytopo.cpp')
| -rw-r--r-- | audio/sysvad/EndpointsCommon/micarraytopo.cpp | 787 |
1 files changed, 787 insertions, 0 deletions
diff --git a/audio/sysvad/EndpointsCommon/micarraytopo.cpp b/audio/sysvad/EndpointsCommon/micarraytopo.cpp new file mode 100644 index 00000000..236d03ea --- /dev/null +++ b/audio/sysvad/EndpointsCommon/micarraytopo.cpp @@ -0,0 +1,787 @@ +/*++ + +Copyright (c) Microsoft Corporation All Rights Reserved + +Module Name: + + micarraytopo.cpp + +Abstract: + + Implementation of topology miniport for the mic array. + +--*/ + +#pragma warning (disable : 4127) + +#include <sysvad.h> +#include "simple.h" +#include "micarraytopo.h" +#include "micarray1toptable.h" + +#pragma code_seg("PAGE") + +//============================================================================= +NTSTATUS +CreateMicArrayMiniportTopology +( + _Out_ PUNKNOWN * Unknown, + _In_ REFCLSID, + _In_opt_ PUNKNOWN UnknownOuter, + _When_((PoolType & NonPagedPoolMustSucceed) != 0, + __drv_reportError("Must succeed pool allocations are forbidden. " + "Allocation failures cause a system crash")) + _In_ POOL_TYPE PoolType, + _In_ PUNKNOWN UnknownAdapter, + _In_opt_ PVOID DeviceContext, + _In_ PENDPOINT_MINIPAIR MiniportPair +) +/*++ + +Routine Description: + + Creates a new topology miniport. + +Arguments: + + Unknown - + + RefclsId - + + UnknownOuter - + + PoolType - + + UnknownAdapter - + + DeviceContext - + + MiniportPair - + +Return Value: + + NT status code. + +--*/ +{ + PAGED_CODE(); + + ASSERT(Unknown); + ASSERT(MiniportPair); + + UNREFERENCED_PARAMETER(UnknownAdapter); + UNREFERENCED_PARAMETER(DeviceContext); + + CMicArrayMiniportTopology *obj = + new (PoolType, MINTOPORT_POOLTAG) + CMicArrayMiniportTopology( UnknownOuter, + MiniportPair->TopoDescriptor, + MiniportPair->DeviceMaxChannels, + MiniportPair->DeviceType ); + if (NULL == obj) + { + return STATUS_INSUFFICIENT_RESOURCES; + } + + obj->AddRef(); + + *Unknown = reinterpret_cast<IUnknown*>(obj); + + return STATUS_SUCCESS; +} // CreateMicArrayMiniportTopology + +//============================================================================= +CMicArrayMiniportTopology::~CMicArrayMiniportTopology +( + void +) +/*++ + +Routine Description: + + Topology miniport destructor + +Arguments: + +Return Value: + + NT status code. + +--*/ +{ + PAGED_CODE(); + + DPF_ENTER(("[CMicArrayMiniportTopology::~CMicArrayMiniportTopology]")); +} // ~CMicArrayMiniportTopology + +//============================================================================= +NTSTATUS +CMicArrayMiniportTopology::DataRangeIntersection +( + _In_ ULONG PinId, + _In_ PKSDATARANGE ClientDataRange, + _In_ PKSDATARANGE MyDataRange, + _In_ ULONG OutputBufferLength, + _Out_writes_bytes_to_opt_(OutputBufferLength, *ResultantFormatLength) + PVOID ResultantFormat OPTIONAL, + _Out_ PULONG ResultantFormatLength +) +/*++ + +Routine Description: + + The DataRangeIntersection function determines the highest quality + intersection of two data ranges. + +Arguments: + + PinId - Pin for which data intersection is being determined. + + ClientDataRange - Pointer to KSDATARANGE structure which contains the data range + submitted by client in the data range intersection property + request. + + MyDataRange - Pin's data range to be compared with client's data range. + + OutputBufferLength - Size of the buffer pointed to by the resultant format + parameter. + + ResultantFormat - Pointer to value where the resultant format should be + returned. + + ResultantFormatLength - Actual length of the resultant format that is placed + at ResultantFormat. This should be less than or equal + to OutputBufferLength. + +Return Value: + + NT status code. + +--*/ +{ + PAGED_CODE(); + + return + CMiniportTopologySYSVAD::DataRangeIntersection + ( + PinId, + ClientDataRange, + MyDataRange, + OutputBufferLength, + ResultantFormat, + ResultantFormatLength + ); +} // DataRangeIntersection + +//============================================================================= +STDMETHODIMP +CMicArrayMiniportTopology::GetDescription +( + _Out_ PPCFILTER_DESCRIPTOR * OutFilterDescriptor +) +/*++ + +Routine Description: + + The GetDescription function gets a pointer to a filter description. + It provides a location to deposit a pointer in miniport's description + structure. This is the placeholder for the FromNode or ToNode fields in + connections which describe connections to the filter's pins. + +Arguments: + + OutFilterDescriptor - Pointer to the filter description. + +Return Value: + + NT status code. + +--*/ +{ + PAGED_CODE(); + + ASSERT(OutFilterDescriptor); + + return CMiniportTopologySYSVAD::GetDescription(OutFilterDescriptor); +} // GetDescription + +//============================================================================= +STDMETHODIMP +CMicArrayMiniportTopology::Init +( + _In_ PUNKNOWN UnknownAdapter, + _In_ PRESOURCELIST ResourceList, + _In_ PPORTTOPOLOGY Port_ +) +/*++ + +Routine Description: + + The Init function initializes the miniport. Callers of this function + should run at IRQL PASSIVE_LEVEL + +Arguments: + + UnknownAdapter - A pointer to the IUnknown interface of the adapter object. + + ResourceList - Pointer to the resource list to be supplied to the miniport + during initialization. The port driver is free to examine the + contents of the ResourceList. The port driver will not be + modify the ResourceList contents. + + Port - Pointer to the topology port object that is linked with this miniport. + +Return Value: + + NT status code. + +--*/ +{ + UNREFERENCED_PARAMETER(ResourceList); + + PAGED_CODE(); + + ASSERT(UnknownAdapter); + ASSERT(Port_); + + DPF_ENTER(("[CMicArrayMiniportTopology::Init]")); + + NTSTATUS ntStatus; + + ntStatus = + CMiniportTopologySYSVAD::Init + ( + UnknownAdapter, + Port_ + ); + + return ntStatus; +} // Init + +//============================================================================= +STDMETHODIMP +CMicArrayMiniportTopology::NonDelegatingQueryInterface +( + _In_ REFIID Interface, + _COM_Outptr_ PVOID * Object +) +/*++ + +Routine Description: + + QueryInterface for MiniportTopology + +Arguments: + + Interface - GUID of the interface + + Object - interface object to be returned. + +Return Value: + + NT status code. + +--*/ +{ + PAGED_CODE(); + + ASSERT(Object); + + if (IsEqualGUIDAligned(Interface, IID_IUnknown)) + { + *Object = PVOID(PUNKNOWN(this)); + } + else if (IsEqualGUIDAligned(Interface, IID_IMiniport)) + { + *Object = PVOID(PMINIPORT(this)); + } + else if (IsEqualGUIDAligned(Interface, IID_IMiniportTopology)) + { + *Object = PVOID(PMINIPORTTOPOLOGY(this)); + } + else + { + *Object = NULL; + } + + if (*Object) + { + // We reference the interface for the caller. + PUNKNOWN(*Object)->AddRef(); + return(STATUS_SUCCESS); + } + + return(STATUS_INVALID_PARAMETER); +} // NonDelegatingQueryInterface + +//============================================================================= +NTSTATUS +CMicArrayMiniportTopology::PropertyHandlerMicArrayGeometry +( + _In_ PPCPROPERTY_REQUEST PropertyRequest +) +/*++ + +Routine Description: + + Handles ( KSPROPSETID_Audio, KSPROPERTY_AUDIO_MIC_ARRAY_GEOMETRY ) + +Arguments: + + PropertyRequest - + +Return Value: + + NT status code. + +--*/ +{ + PAGED_CODE(); + + ASSERT(PropertyRequest); + + DPF_ENTER(("[PropertyHandlerMicArrayGeometry]")); + + NTSTATUS ntStatus = STATUS_INVALID_DEVICE_REQUEST; + ULONG nPinId = (ULONG)-1; + + if (PropertyRequest->InstanceSize >= sizeof(ULONG)) + { + nPinId = *(PULONG(PropertyRequest->Instance)); + + if (nPinId == KSPIN_TOPO_MIC_ELEMENTS) + { + if (PropertyRequest->Verb & KSPROPERTY_TYPE_BASICSUPPORT) + { + ntStatus = + PropertyHandler_BasicSupport + ( + PropertyRequest, + KSPROPERTY_TYPE_BASICSUPPORT | KSPROPERTY_TYPE_GET, + VT_ILLEGAL + ); + } + else + { + ULONG cElements = IsCombined()? 4 : 2; + ULONG cbNeeded = FIELD_OFFSET(KSAUDIO_MIC_ARRAY_GEOMETRY, KsMicCoord) + + cElements * sizeof(KSAUDIO_MICROPHONE_COORDINATES); + + if (PropertyRequest->ValueSize == 0) + { + PropertyRequest->ValueSize = cbNeeded; + ntStatus = STATUS_BUFFER_OVERFLOW; + } + else if (PropertyRequest->ValueSize < cbNeeded) + { + ntStatus = STATUS_BUFFER_TOO_SMALL; + } + else + { + if (PropertyRequest->Verb & KSPROPERTY_TYPE_GET) + { + PKSAUDIO_MIC_ARRAY_GEOMETRY pMAG = (PKSAUDIO_MIC_ARRAY_GEOMETRY)PropertyRequest->Value; + const SHORT MicArray_180_Degrees = 31416; // 10000 * pi + const SHORT MicArray_45_Degrees = 7854; // 10000 * pi / 4 + + if (IsFront()) + { + // fill in mic array geometry fields + pMAG->usVersion = 0x0100; // Version of Mic array specification (0x0100) + pMAG->usMicArrayType = (USHORT)KSMICARRAY_MICARRAYTYPE_LINEAR; // Type of Mic Array + pMAG->wVerticalAngleBegin = -MicArray_45_Degrees; // Work Volume Vertical Angle Begin + pMAG->wVerticalAngleEnd = MicArray_45_Degrees; // Work Volume Vertical Angle End + pMAG->wHorizontalAngleBegin = 0; // Work Volume HorizontalAngle Begin + pMAG->wHorizontalAngleEnd = 0; // Work Volume HorizontalAngle End + pMAG->usFrequencyBandLo = 100; // Low end of Freq Range + pMAG->usFrequencyBandHi = 8000; // High end of Freq Range + + pMAG->usNumberOfMicrophones = 2; // Count of microphone coordinate structures to follow. + + pMAG->KsMicCoord[0].usType = (USHORT)KSMICARRAY_MICTYPE_CARDIOID; + pMAG->KsMicCoord[0].wXCoord = 0; + pMAG->KsMicCoord[0].wYCoord = -100; // mic elements are 200 mm apart + pMAG->KsMicCoord[0].wZCoord = 0; + pMAG->KsMicCoord[0].wVerticalAngle = 0; + pMAG->KsMicCoord[0].wHorizontalAngle = 0; + + pMAG->KsMicCoord[1].usType = (USHORT)KSMICARRAY_MICTYPE_CARDIOID; + pMAG->KsMicCoord[1].wXCoord = 0; + pMAG->KsMicCoord[1].wYCoord = 100; // mic elements are 200 mm apart + pMAG->KsMicCoord[1].wZCoord = 0; + pMAG->KsMicCoord[1].wVerticalAngle = 0; + pMAG->KsMicCoord[1].wHorizontalAngle = 0; + } + else if (IsBack()) // in this sample the geometries for front and back are the same. + { + // fill in mic array geometry fields + pMAG->usVersion = 0x0100; // Version of Mic array specification (0x0100) + pMAG->usMicArrayType = (USHORT)KSMICARRAY_MICARRAYTYPE_LINEAR; // Type of Mic Array + pMAG->wVerticalAngleBegin = -MicArray_45_Degrees; // Work Volume Vertical Angle Begin + pMAG->wVerticalAngleEnd = MicArray_45_Degrees; // Work Volume Vertical Angle End + pMAG->wHorizontalAngleBegin = 0; // Work Volume HorizontalAngle Begin + pMAG->wHorizontalAngleEnd = 0; // Work Volume HorizontalAngle End + pMAG->usFrequencyBandLo = 100; // Low end of Freq Range + pMAG->usFrequencyBandHi = 8000; // High end of Freq Range + + pMAG->usNumberOfMicrophones = 2; // Count of microphone coordinate structures to follow. + + pMAG->KsMicCoord[0].usType = (USHORT)KSMICARRAY_MICTYPE_CARDIOID; + pMAG->KsMicCoord[0].wXCoord = 0; + pMAG->KsMicCoord[0].wYCoord = -100; // mic elements are 200 mm apart + pMAG->KsMicCoord[0].wZCoord = 0; + pMAG->KsMicCoord[0].wVerticalAngle = 0; + pMAG->KsMicCoord[0].wHorizontalAngle = 0; + + pMAG->KsMicCoord[1].usType = (USHORT)KSMICARRAY_MICTYPE_CARDIOID; + pMAG->KsMicCoord[1].wXCoord = 0; + pMAG->KsMicCoord[1].wYCoord = 100; // mic elements are 200 mm apart + pMAG->KsMicCoord[1].wZCoord = 0; + pMAG->KsMicCoord[1].wVerticalAngle = 0; + pMAG->KsMicCoord[1].wHorizontalAngle = 0; + } + else + { + // fill in mic array geometry fields + pMAG->usVersion = 0x0100; // Version of Mic array specification (0x0100) + pMAG->usMicArrayType = (USHORT)KSMICARRAY_MICARRAYTYPE_LINEAR; // Type of Mic Array + pMAG->wVerticalAngleBegin = -MicArray_45_Degrees; // Work Volume Vertical Angle Begin + pMAG->wVerticalAngleEnd = MicArray_45_Degrees; // Work Volume Vertical Angle End + pMAG->wHorizontalAngleBegin = -MicArray_180_Degrees; // Work Volume HorizontalAngle Begin + pMAG->wHorizontalAngleEnd = MicArray_180_Degrees; // Work Volume HorizontalAngle End + pMAG->usFrequencyBandLo = 100; // Low end of Freq Range + pMAG->usFrequencyBandHi = 8000; // High end of Freq Range + + pMAG->usNumberOfMicrophones = 4; // Count of microphone coordinate structures to follow. + + // front elements + pMAG->KsMicCoord[0].usType = (USHORT)KSMICARRAY_MICTYPE_CARDIOID; + pMAG->KsMicCoord[0].wXCoord = 0; + pMAG->KsMicCoord[0].wYCoord = -100; // mic elements are 200 mm apart + pMAG->KsMicCoord[0].wZCoord = 0; + pMAG->KsMicCoord[0].wVerticalAngle = 0; + pMAG->KsMicCoord[0].wHorizontalAngle = 0; + + pMAG->KsMicCoord[1].usType = (USHORT)KSMICARRAY_MICTYPE_CARDIOID; + pMAG->KsMicCoord[1].wXCoord = 0; + pMAG->KsMicCoord[1].wYCoord = 100; // mic elements are 200 mm apart + pMAG->KsMicCoord[1].wZCoord = 0; + pMAG->KsMicCoord[1].wVerticalAngle = 0; + pMAG->KsMicCoord[1].wHorizontalAngle = 0; + + // back elements + pMAG->KsMicCoord[2].usType = (USHORT)KSMICARRAY_MICTYPE_CARDIOID; + pMAG->KsMicCoord[2].wXCoord = 0; + pMAG->KsMicCoord[2].wYCoord = -100; // mic elements are 200 mm apart + pMAG->KsMicCoord[2].wZCoord = 0; + pMAG->KsMicCoord[2].wVerticalAngle = 0; + pMAG->KsMicCoord[2].wHorizontalAngle = -MicArray_180_Degrees; + + pMAG->KsMicCoord[3].usType = (USHORT)KSMICARRAY_MICTYPE_CARDIOID; + pMAG->KsMicCoord[3].wXCoord = 0; + pMAG->KsMicCoord[3].wYCoord = 100; // mic elements are 200 mm apart + pMAG->KsMicCoord[3].wZCoord = 0; + pMAG->KsMicCoord[3].wVerticalAngle = 0; + pMAG->KsMicCoord[3].wHorizontalAngle = -MicArray_180_Degrees; + + } + + ntStatus = STATUS_SUCCESS; + } + } + } + } + } + + return ntStatus; +} + +//============================================================================= +NTSTATUS +CMicArrayMiniportTopology::PropertyHandlerJackDescription +( + _In_ PPCPROPERTY_REQUEST PropertyRequest +) +/*++ + +Routine Description: + + Handles ( KSPROPSETID_Jack, KSPROPERTY_JACK_DESCRIPTION ) + +Arguments: + + PropertyRequest - + +Return Value: + + NT status code. + +--*/ +{ + PAGED_CODE(); + + ASSERT(PropertyRequest); + + DPF_ENTER(("[PropertyHandlerJackDescription]")); + + NTSTATUS ntStatus = STATUS_INVALID_DEVICE_REQUEST; + ULONG nPinId = (ULONG)-1; + + if (PropertyRequest->InstanceSize >= sizeof(ULONG)) + { + nPinId = *(PULONG(PropertyRequest->Instance)); + + if (nPinId == KSPIN_TOPO_MIC_ELEMENTS) + { + if (PropertyRequest->Verb & KSPROPERTY_TYPE_BASICSUPPORT) + { + ntStatus = + PropertyHandler_BasicSupport + ( + PropertyRequest, + KSPROPERTY_TYPE_BASICSUPPORT | KSPROPERTY_TYPE_GET, + VT_ILLEGAL + ); + } + else + { + ULONG cbNeeded = sizeof(KSMULTIPLE_ITEM) + sizeof(KSJACK_DESCRIPTION); + + if (PropertyRequest->ValueSize == 0) + { + PropertyRequest->ValueSize = cbNeeded; + ntStatus = STATUS_BUFFER_OVERFLOW; + } + else if (PropertyRequest->ValueSize < cbNeeded) + { + ntStatus = STATUS_BUFFER_TOO_SMALL; + } + else + { + if (PropertyRequest->Verb & KSPROPERTY_TYPE_GET) + { + PKSMULTIPLE_ITEM pMI = (PKSMULTIPLE_ITEM)PropertyRequest->Value; + PKSJACK_DESCRIPTION pDesc = (PKSJACK_DESCRIPTION)(pMI+1); + + pMI->Size = cbNeeded; + pMI->Count = 1; + + pDesc->ChannelMapping = 0; // Don't specify channel mask for array mic + pDesc->Color = 0x00000000; // Black. This is an integrated device + pDesc->ConnectionType = eConnTypeUnknown; // Integrated. + pDesc->GenLocation = eGenLocPrimaryBox; + pDesc->GeoLocation = IsFront() ? eGeoLocFront : + (IsBack() ? eGeoLocRear : eGeoLocNotApplicable); + pDesc->PortConnection = ePortConnIntegratedDevice; + pDesc->IsConnected = TRUE; // This is an integrated device, so it's always "connected" + + ntStatus = STATUS_SUCCESS; + } + } + } + } + } + + return ntStatus; +} + +//============================================================================= +NTSTATUS +CMicArrayMiniportTopology::PropertyHandlerJackDescription2 +( + _In_ PPCPROPERTY_REQUEST PropertyRequest +) +/*++ + +Routine Description: + + Handles ( KSPROPSETID_Jack, KSPROPERTY_JACK_DESCRIPTION2 ) + +Arguments: + + PropertyRequest - + +Return Value: + + NT status code. + +--*/ +{ + PAGED_CODE(); + + ASSERT(PropertyRequest); + + DPF_ENTER(("[PropertyHandlerJackDescription2]")); + + NTSTATUS ntStatus = STATUS_INVALID_DEVICE_REQUEST; + ULONG nPinId = (ULONG)-1; + + if (PropertyRequest->InstanceSize >= sizeof(ULONG)) + { + nPinId = *(PULONG(PropertyRequest->Instance)); + + if (nPinId == KSPIN_TOPO_MIC_ELEMENTS) + { + if (PropertyRequest->Verb & KSPROPERTY_TYPE_BASICSUPPORT) + { + ntStatus = + PropertyHandler_BasicSupport + ( + PropertyRequest, + KSPROPERTY_TYPE_BASICSUPPORT | KSPROPERTY_TYPE_GET, + VT_ILLEGAL + ); + } + else + { + ULONG cbNeeded = sizeof(KSMULTIPLE_ITEM) + sizeof(KSJACK_DESCRIPTION2); + + if (PropertyRequest->ValueSize == 0) + { + PropertyRequest->ValueSize = cbNeeded; + ntStatus = STATUS_BUFFER_OVERFLOW; + } + else if (PropertyRequest->ValueSize < cbNeeded) + { + ntStatus = STATUS_BUFFER_TOO_SMALL; + } + else + { + if (PropertyRequest->Verb & KSPROPERTY_TYPE_GET) + { + PKSMULTIPLE_ITEM pMI = (PKSMULTIPLE_ITEM)PropertyRequest->Value; + PKSJACK_DESCRIPTION2 pDesc = (PKSJACK_DESCRIPTION2)(pMI+1); + + pMI->Size = cbNeeded; + pMI->Count = 1; + + RtlZeroMemory(pDesc, sizeof(KSJACK_DESCRIPTION2)); + + // + // Specifies the lower 16 bits of the DWORD parameter. This parameter indicates whether + // the jack is currently active, streaming, idle, or hardware not ready. + // + pDesc->DeviceStateInfo = 0; + + // + // From MSDN: + // "If an audio device lacks jack presence detection, the IsConnected member of + // the KSJACK_DESCRIPTION structure must always be set to TRUE. To remove the + // ambiguity that results from this dual meaning of the TRUE value for IsConnected, + // a client application can call IKsJackDescription2::GetJackDescription2 to read + // the JackCapabilities flag of the KSJACK_DESCRIPTION2 structure. If this flag has + // the JACKDESC2_PRESENCE_DETECT_CAPABILITY bit set, it indicates that the endpoint + // does in fact support jack presence detection. In that case, the return value of + // the IsConnected member can be interpreted to accurately reflect the insertion status + // of the jack." + // + // Bit definitions: + // 0x00000001 - JACKDESC2_PRESENCE_DETECT_CAPABILITY + // 0x00000002 - JACKDESC2_DYNAMIC_FORMAT_CHANGE_CAPABILITY + // + pDesc->JackCapabilities = 0; + + ntStatus = STATUS_SUCCESS; + } + } + } + } + } + + return ntStatus; +} + +//============================================================================= +NTSTATUS +PropertyHandler_MicArrayTopoFilter +( + _In_ PPCPROPERTY_REQUEST PropertyRequest +) +/*++ + +Routine Description: + + Redirects property request to miniport object + +Arguments: + + PropertyRequest - + +Return Value: + + NT status code. + +--*/ +{ + PAGED_CODE(); + + ASSERT(PropertyRequest); + + DPF_ENTER(("[PropertyHandler_MicArrayTopoFilter]")); + + // PropertryRequest structure is filled by portcls. + // MajorTarget is a pointer to miniport object for miniports. + // + NTSTATUS ntStatus = STATUS_INVALID_DEVICE_REQUEST; + PCMicArrayMiniportTopology pMiniport = (PCMicArrayMiniportTopology)PropertyRequest->MajorTarget; + + if (IsEqualGUIDAligned(*PropertyRequest->PropertyItem->Set, KSPROPSETID_Audio)) + { + if (PropertyRequest->PropertyItem->Id == KSPROPERTY_AUDIO_MIC_ARRAY_GEOMETRY) + { + ntStatus = pMiniport->PropertyHandlerMicArrayGeometry(PropertyRequest); + } + } + else if (IsEqualGUIDAligned(*PropertyRequest->PropertyItem->Set, KSPROPSETID_Jack)) + { + if (PropertyRequest->PropertyItem->Id == KSPROPERTY_JACK_DESCRIPTION) + { + ntStatus = pMiniport->PropertyHandlerJackDescription(PropertyRequest); + } + else if (PropertyRequest->PropertyItem->Id == KSPROPERTY_JACK_DESCRIPTION2) + { + ntStatus = pMiniport->PropertyHandlerJackDescription2(PropertyRequest); + } + } + + return ntStatus; +} // PropertyHandler_TopoFilter + +//============================================================================= +NTSTATUS +PropertyHandler_MicArrayTopology +( + _In_ PPCPROPERTY_REQUEST PropertyRequest +) +/*++ + +Routine Description: + + Redirects property request to miniport object + +Arguments: + + PropertyRequest - + +Return Value: + + NT status code. + +--*/ +{ + PAGED_CODE(); + + ASSERT(PropertyRequest); + + DPF_ENTER(("[PropertyHandler_MicArrayTopology]")); + + // PropertryRequest structure is filled by portcls. + // MajorTarget is a pointer to miniport object for miniports. + // + PCMicArrayMiniportTopology pMiniport = (PCMicArrayMiniportTopology)PropertyRequest->MajorTarget; + + return pMiniport->PropertyHandlerGeneric(PropertyRequest); +} // PropertyHandler_MicArrayTopology + +#pragma code_seg() + |