1 files changed, 0 insertions, 122 deletions
diff --git a/network/wlan/WDI/HAL/HalSIC.h b/network/wlan/WDI/HAL/HalSIC.h
deleted file mode 100644
index ab46b9b3..00000000
--- a/network/wlan/WDI/HAL/HalSIC.h
+++ /dev/null
@@ -1,122 +0,0 @@
-#ifndef __INC_HALSIC_H
-#define __INC_HALSIC_H
-
-//==================================================================
-// Note: If SIC_ENABLE under PCIE, because of the slow operation
-//	you should 
-//	1) "#define USE_WORKITEM	1" 							in PrecompInc.h.
-//	2) "#define RTL8723_FPGA_VERIFICATION	1"				in Precomp.h.WlanE.Windows
-//	3) "#define LOAD_FIRMWARE_FROM_HEADER	0"	in Precomp.h.WlanE.Windows if needed.
-//
-#if (RTL8188E_FPGA_TRUE_PHY_VERIFICATION == 1)
-#define	SIC_ENABLE				1
-#define	SIC_HW_SUPPORT		1
-#else
-#define	SIC_ENABLE				0
-#define	SIC_HW_SUPPORT		0
-#endif
-//==================================================================
-
-
-#define	SIC_MAX_POLL_CNT		5
-
-#if(SIC_HW_SUPPORT == 1)
-#define	SIC_CMD_READY			0
-#define	SIC_CMD_PREWRITE		0x1
-
-#define	SIC_CMD_WRITE_88E			0x40
-#define	SIC_CMD_PREREAD_88E		0x2
-#define	SIC_CMD_READ_88E			0x80
-#define	SIC_CMD_INIT_88E			0xf0
-#define	SIC_INIT_VAL_88E			0xff
-
-#define	SIC_INIT_REG_88E			0x1b7
-#define	SIC_CMD_REG_88E			0x1EB		// 1byte
-#define	SIC_ADDR_REG_88E			0x1E8		// 1b4~1b5, 2 bytes
-#define	SIC_DATA_REG_88E			0x1EC		// 1b0~1b3
-
-#define	SIC_CMD_WRITE_92C			0x11
-#define	SIC_CMD_PREREAD_92C		0x2
-#define	SIC_CMD_READ_92C			0x12
-#define	SIC_CMD_INIT_92C			0x1f
-#define	SIC_INIT_VAL_92C			0xff
-
-#define	SIC_INIT_REG_92C			0x1b7
-#define	SIC_CMD_REG_92C			0x1b6		// 1byte
-#define	SIC_ADDR_REG_92C			0x1b4		// 1b4~1b5, 2 bytes
-#define	SIC_DATA_REG_92C			0x1b0		// 1b0~1b3
-
-
-#define GET_SIC_CMD_READ(_Adapter)	\
-		IS_HARDWARE_TYPE_8188E(_Adapter)? SIC_CMD_READ_88E : SIC_CMD_READ_92C
-
-#define GET_SIC_CMD_WRITE(_Adapter)	\
-		IS_HARDWARE_TYPE_8188E(_Adapter)? SIC_CMD_WRITE_88E : SIC_CMD_WRITE_92C
-
-#define GET_SIC_INIT_REG(_Adapter)	\
-		IS_HARDWARE_TYPE_8188E(_Adapter)? SIC_INIT_REG_88E : SIC_INIT_REG_92C
-
-#define GET_SIC_INIT_VAL(_Adapter)	\
-		IS_HARDWARE_TYPE_8188E(_Adapter)? SIC_INIT_VAL_88E : SIC_INIT_VAL_92C
-
-#define GET_SIC_CMD_INIT(_Adapter)	\
-		IS_HARDWARE_TYPE_8188E(_Adapter)? SIC_CMD_INIT_88E : SIC_CMD_INIT_92C
-
-
-#else
-#define	SIC_CMD_READY			0
-#define	SIC_CMD_WRITE			1
-#define	SIC_CMD_READ			2
-
-#define	SIC_CMD_REG_88E			0x1EB		// 1byte
-#define	SIC_ADDR_REG_88E			0x1E8		// 1b9~1ba, 2 bytes
-#define	SIC_DATA_REG_88E			0x1EC		// 1bc~1bf
-
-#define	SIC_CMD_REG_92C			0x1b8		// 1byte
-#define	SIC_ADDR_REG_92C			0x1b9		// 1b9~1ba, 2 bytes
-#define	SIC_DATA_REG_92C			0x1bc		// 1bc~1bf
-
-#define GET_SIC_CMD_READ(_Adapter)		SIC_CMD_READ
-#define GET_SIC_CMD_WRITE(_Adapter)	SIC_CMD_WRITE
-
-#endif
-
-
-#define GET_SIC_CMD_REG(_Adapter)	\
-		IS_HARDWARE_TYPE_8188E(_Adapter)? SIC_CMD_REG_88E : SIC_CMD_REG_92C
-
-#define GET_SIC_CMD_PREREAD(_Adapter)	\
-		IS_HARDWARE_TYPE_8188E(_Adapter)? SIC_CMD_PREREAD_88E : SIC_CMD_PREREAD_92C
-
-#define GET_SIC_ADDR_REG(_Adapter)	\
-		IS_HARDWARE_TYPE_8188E(_Adapter)? SIC_ADDR_REG_88E : SIC_ADDR_REG_92C
-
-#define GET_SIC_DATA_REG(_Adapter)	\
-		IS_HARDWARE_TYPE_8188E(_Adapter)? SIC_DATA_REG_88E : SIC_DATA_REG_92C
-
-
-VOID
-SIC_SetBBReg(
-	IN	PADAPTER	Adapter,
-	IN	u4Byte		RegAddr,
-	IN	u4Byte		BitMask,
-	IN	u4Byte		Data
-	);
-
-u4Byte
-SIC_QueryBBReg(
-	IN	PADAPTER	Adapter,
-	IN	u4Byte		RegAddr,
-	IN	u4Byte		BitMask
-	);
-
-VOID
-SIC_Init(
-	IN	PADAPTER	Adapter
-	);
-
-BOOLEAN
-SIC_LedOff(
-	IN	PADAPTER	Adapter
-	);
-#endif