diff options
Diffstat (limited to 'xmake/plugins/project/xcode2/get_xcode_info.lua')
| -rw-r--r-- | xmake/plugins/project/xcode2/get_xcode_info.lua | 240 |
1 files changed, 240 insertions, 0 deletions
diff --git a/xmake/plugins/project/xcode2/get_xcode_info.lua b/xmake/plugins/project/xcode2/get_xcode_info.lua new file mode 100644 index 000000000..388b273bf --- /dev/null +++ b/xmake/plugins/project/xcode2/get_xcode_info.lua @@ -0,0 +1,240 @@ +--!A cross-platform build utility based on Lua +-- +-- Licensed under the Apache License, Version 2.0 (the "License"); +-- you may not use this file except in compliance with the License. +-- You may obtain a copy of the License at +-- +-- http://www.apache.org/licenses/LICENSE-2.0 +-- +-- Unless required by applicable law or agreed to in writing, software +-- distributed under the License is distributed on an "AS IS" BASIS, +-- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +-- See the License for the specific language governing permissions and +-- limitations under the License. +-- +-- Copyright (C) 2015-present, TBOOX Open Source Group. +-- +-- @author JXMaster +-- @file get_xcode_info.lua +-- + +-- imports +import("core.base.option") +import("core.project.config") +import("core.project.project") + +function _get_project_modes() + local ret_modes = {} + local modes = option.get("modes") + if modes then + if not modes:find("\"") then + modes = modes:gsub(",", path.envsep()) + end + for _, mode in ipairs(path.splitenv(modes)) do + table.insert(ret_modes, mode:trim()) + end + else + ret_modes = project.modes() + end + return ret_modes +end + +function _add_PBXFileReference(xcinfo, file_info) + local obj = {} + obj.explicitFileType = file_info.explicitFileType + obj.lastKnownFileType = file_info.lastKnownFileType + obj.name = file_info.name + obj.path = file_info.path + obj.sourceTree = file_info.sourceTree + obj.includeInIndex = file_info.includeInIndex + local uuid = xcinfo:gen_uuid() + xcinfo.sections.PBXFileReference = xcinfo.sections.PBXFileReference or {} + xcinfo.sections.PBXFileReference[uuid] = obj + return uuid +end + +function _add_PBXGroup(xcinfo, name, sourceTree) + local obj = {} + obj.name = name + obj.sourceTree = sourceTree + obj.children = {} + local uuid = xcinfo:gen_uuid() + xcinfo.sections.PBXGroup = xcinfo.sections.PBXGroup or {} + xcinfo.sections.PBXGroup[uuid] = obj + return uuid +end + +function _add_XCBuildConfiguration(xcinfo, mode) + local obj = {} + obj.name = mode + obj.buildSettings = {} + -- This allows scripts to read/write files that are not in the Input/Output list of + -- the phase. + obj.buildSettings.ENABLE_USER_SCRIPT_SANDBOXING = false + local uuid = xcinfo:gen_uuid() + xcinfo.sections.XCBuildConfiguration = xcinfo.sections.XCBuildConfiguration or {} + xcinfo.sections.XCBuildConfiguration[uuid] = obj + return uuid +end + +function _add_XCConfigurationList(xcinfo) + local obj = {} + local modes = _get_project_modes() + obj.buildConfigurations = {} + for _, mode in ipairs(modes) do + table.insert(obj.buildConfigurations, _add_XCBuildConfiguration(xcinfo, mode)) + end + local uuid = xcinfo:gen_uuid() + xcinfo.sections.XCConfigurationList = xcinfo.sections.XCConfigurationList or {} + xcinfo.sections.XCConfigurationList[uuid] = obj + return uuid +end + +function _add_PBXShellScriptBuildPhase(xcinfo, target) + local obj = {} + obj.shellScript = [[ +cd \"]] .. os.projectdir() .. [[\" +XMAKE_BIN=\"]] .. os.programfile() .. [[\" +# Running xmake scripts. +${XMAKE_BIN} f -y -m ${CONFIGURATION} -p ${PLATFORM_NAME} -a ${NATIVE_ARCH} -o ${BUILD_DIR} +${XMAKE_BIN} build ${TARGET_NAME}\n# Running xmake install scripts. +${XMAKE_BIN} install -o ${CONFIGURATION_TEMP_DIR}/Install ${TARGET_NAME} +# Copy files to build path. +if test -e ${CONFIGURATION_TEMP_DIR}/Install/bin +then + cp -r ${CONFIGURATION_TEMP_DIR}/Install/bin/* ${CONFIGURATION_BUILD_DIR} +fi +if test -e ${CONFIGURATION_TEMP_DIR}/Install/lib +then + cp -r ${CONFIGURATION_TEMP_DIR}/Install/lib/* ${CONFIGURATION_BUILD_DIR} +fi +cp -r ${CONFIGURATION_TEMP_DIR}/Install/*.app ${CONFIGURATION_BUILD_DIR} +# Remove install dir. +rm -r ${CONFIGURATION_TEMP_DIR}/Install\n\n +]] + local uuid = xcinfo:gen_uuid() + xcinfo.sections.PBXShellScriptBuildPhase = xcinfo.sections.PBXShellScriptBuildPhase or {} + xcinfo.sections.PBXShellScriptBuildPhase[uuid] = obj + return uuid +end + +function _add_target_files(xcinfo, group, files) + for _, v in table.orderpairs(files) do + local file_info = {} + file_info.name = path.filename(v) + file_info.path = path.join(project.directory(), v) + file_info.sourceTree = "\"<absolute>\"" + local ext = path.extension(v) + if ext == ".h" then + file_info.lastKnownFileType = "sourcecode.c.h" + elseif ext == ".c" then + file_info.lastKnownFileType = "sourcecode.c.c" + elseif ext == ".m" then + file_info.lastKnownFileType = "sourcecode.c.objc" + elseif ext == ".hpp" then + file_info.lastKnownFileType = "sourcecode.cpp.h" + elseif ext == ".cpp" then + file_info.lastKnownFileType = "sourcecode.cpp.cpp" + elseif ext == ".mm" then + file_info.lastKnownFileType = "sourcecode.cpp.objcpp" + end + table.insert(group.children, _add_PBXFileReference(xcinfo, file_info)) + end +end + +function _add_PBXNativeTarget(xcinfo, target_name, target) + local obj = {} + obj.name = target_name + obj.productName = target_name + -- Add product file. + local product_file = {} + if target:kind() == "static" then + product_file.explicitFileType = "com.apple.product-type.library.static" + elseif target:kind() == "shared" then + product_file.explicitFileType = "com.apple.product-type.library.dynamic" + elseif target:kind() == "binary" then + product_file.explicitFileType = "com.apple.product-type.tool" + end + product_file.path = target:filename() + product_file.sourceTree = "BUILT_PRODUCTS_DIR" + product_file.includeInIndex = 0 + obj.productReference = _add_PBXFileReference(xcinfo, product_file) + obj.productType = product_file.explicitFileType + -- Add product file to product group. + local project_obj = xcinfo.sections.PBXProject[xcinfo.root_object] + local product_group = xcinfo.sections.PBXGroup[project_obj.productRefGroup] + table.insert(product_group.children, obj.productReference) + + -- Add files. + local headerfiles = target:headerfiles() + local sourcefiles = target:sourcefiles() + obj.headerFileGroup = _add_PBXGroup(xcinfo, "Header Files", "<group>") + obj.sourceFileGroup = _add_PBXGroup(xcinfo, "Source Files", "<group>") + local header_group = xcinfo.sections.PBXGroup[obj.headerFileGroup] + local source_group = xcinfo.sections.PBXGroup[obj.sourceFileGroup] + _add_target_files(xcinfo, header_group, headerfiles) + _add_target_files(xcinfo, source_group, sourcefiles) + obj.mainGroup = _add_PBXGroup(xcinfo, obj.productName, "<group>") + local main_group = xcinfo.sections.PBXGroup[obj.mainGroup] + table.insert(main_group.children, obj.headerFileGroup) + table.insert(main_group.children, obj.sourceFileGroup) + -- Add configuration list for target. + obj.buildConfigurationList = _add_XCConfigurationList(xcinfo) + -- Add build phases. + obj.buildPhases = {} + table.insert(obj.buildPhases, _add_PBXShellScriptBuildPhase(xcinfo, target)) + local uuid = xcinfo:gen_uuid() + xcinfo.sections.PBXNativeTarget = xcinfo.sections.PBXNativeTarget or {} + xcinfo.sections.PBXNativeTarget[uuid] = obj + return uuid +end + +function main(outputdir) + local xcinfo = {} + + xcinfo.project_dir = outputdir + xcinfo.project_bundle = (project.name() or path.filename(project.directory())) .. ".xcodeproj" + xcinfo.project_dir_uuid = string.upper(hash.strhash32(xcinfo.project_dir)) + xcinfo.project_bundle_uuid = string.upper(hash.strhash32(xcinfo.project_bundle)) + xcinfo.uuid_counter = 0 + xcinfo.gen_uuid = function(self) + local counter = self.uuid_counter + self.uuid_counter = self.uuid_counter + 1 + return self.project_dir_uuid .. self.project_bundle_uuid .. string.format("%08X", counter) + end + + -- Used to collect Xcode nodes. + -- nodes are grouped by their types. For example, all PBXFileReference + -- nodes will be in xcinfo.sections.PBXFileReference, indexed by their UUIDs. + xcinfo.sections = {} + + -- Add project node + local sections = xcinfo.sections + sections.PBXProject = {} + local project_uuid = xcinfo:gen_uuid() + xcinfo.root_object = project_uuid + sections.PBXProject[project_uuid] = {} + local project_obj = sections.PBXProject[project_uuid] + + -- collect buildConfigurationList + project_obj.buildConfigurationList = _add_XCConfigurationList(xcinfo) + + -- collect main group + project_obj.mainGroup = _add_PBXGroup(xcinfo, nil, "<group>") + local main_group = xcinfo.sections.PBXGroup[project_obj.mainGroup] + + -- collect product ref group + project_obj.productRefGroup = _add_PBXGroup(xcinfo, "Products", "<group>"); + + -- collect targets. + project_obj.targets = {} + for target_name, target in table.orderpairs(project.targets()) do + local target = _add_PBXNativeTarget(xcinfo, target_name, target) + table.insert(project_obj.targets, target) + local target_obj = xcinfo.sections.PBXNativeTarget[target] + table.insert(main_group.children, target_obj.mainGroup) + end + table.insert(main_group.children, project_obj.productRefGroup) + + return xcinfo +end
\ No newline at end of file |