copy bouffalo ehci glue from official sdk

1 files changed, 134 insertions, 0 deletions

diff --git a/port/ehci/usb_glue_bouffalo.c b/port/ehci/usb_glue_bouffalo.c
new file mode 100644
index 00000000..c3318a89
--- /dev/null
+++ b/port/ehci/usb_glue_bouffalo.c
@@ -0,0 +1,134 @@
+#include "bflb_core.h"
+#include "usbh_core.h"
+#include "hardware/usb_v2_reg.h"
+
+#ifndef CONFIG_USB_EHCI_HCOR_RESERVED_DISABLE
+#error "usb host must enable CONFIG_USB_EHCI_HCOR_RESERVED_DISABLE"
+#endif
+
+#define BLFB_USB_BASE ((uint32_t)0x20072000)
+#define BFLB_PDS_BASE ((uint32_t)0x2000e000)
+
+#define PDS_USB_CTL_OFFSET      (0x500) /* usb_ctl */
+#define PDS_USB_PHY_CTRL_OFFSET (0x504) /* usb_phy_ctrl */
+
+/* 0x500 : usb_ctl */
+#define PDS_REG_USB_SW_RST_N   (1 << 0U)
+#define PDS_REG_USB_EXT_SUSP_N (1 << 1U)
+#define PDS_REG_USB_WAKEUP     (1 << 2U)
+#define PDS_REG_USB_L1_WAKEUP  (1 << 3U)
+#define PDS_REG_USB_DRVBUS_POL (1 << 4U)
+#define PDS_REG_USB_IDDIG      (1 << 5U)
+
+/* 0x504 : usb_phy_ctrl */
+#define PDS_REG_USB_PHY_PONRST       (1 << 0U)
+#define PDS_REG_USB_PHY_OSCOUTEN     (1 << 1U)
+#define PDS_REG_USB_PHY_XTLSEL_SHIFT (2U)
+#define PDS_REG_USB_PHY_XTLSEL_MASK  (0x3 << PDS_REG_USB_PHY_XTLSEL_SHIFT)
+#define PDS_REG_USB_PHY_OUTCLKSEL    (1 << 4U)
+#define PDS_REG_USB_PHY_PLLALIV      (1 << 5U)
+#define PDS_REG_PU_USB20_PSW         (1 << 6U)
+
+#define USB_SOF_TIMER_MASK_AFTER_RESET_HS (0x44C)
+#define USB_SOF_TIMER_MASK_AFTER_RESET_FS (0x2710)
+
+extern void USBH_IRQHandler();
+
+static void bflb_usb_phy_init(void)
+{
+    uint32_t regval;
+
+    /* USB_PHY_CTRL[3:2] reg_usb_phy_xtlsel=0                             */
+    /* 2000e504 = 0x40; #100; USB_PHY_CTRL[6] reg_pu_usb20_psw=1 (VCC33A) */
+    /* 2000e504 = 0x41; #500; USB_PHY_CTRL[0] reg_usb_phy_ponrst=1        */
+    /* 2000e500 = 0x20; #100; USB_CTL[0] reg_usb_sw_rst_n=0               */
+    /* 2000e500 = 0x22; #500; USB_CTL[1] reg_usb_ext_susp_n=1             */
+    /* 2000e500 = 0x23; #100; USB_CTL[0] reg_usb_sw_rst_n=1               */
+    /* #1.2ms; wait UCLK                                                  */
+    /* wait(soc616_b0.usb_uclk);                                          */
+
+    regval = getreg32(BFLB_PDS_BASE + PDS_USB_PHY_CTRL_OFFSET);
+    regval &= ~PDS_REG_USB_PHY_XTLSEL_MASK;
+    putreg32(regval, BFLB_PDS_BASE + PDS_USB_PHY_CTRL_OFFSET);
+
+    regval = getreg32(BFLB_PDS_BASE + PDS_USB_PHY_CTRL_OFFSET);
+    regval |= PDS_REG_PU_USB20_PSW;
+    putreg32(regval, BFLB_PDS_BASE + PDS_USB_PHY_CTRL_OFFSET);
+
+    regval = getreg32(BFLB_PDS_BASE + PDS_USB_PHY_CTRL_OFFSET);
+    regval |= PDS_REG_USB_PHY_PONRST;
+    putreg32(regval, BFLB_PDS_BASE + PDS_USB_PHY_CTRL_OFFSET);
+
+    /* greater than 5T */
+    bflb_mtimer_delay_us(1);
+
+    regval = getreg32(BFLB_PDS_BASE + PDS_USB_CTL_OFFSET);
+    regval &= ~PDS_REG_USB_SW_RST_N;
+    putreg32(regval, BFLB_PDS_BASE + PDS_USB_CTL_OFFSET);
+
+    /* greater than 5T */
+    bflb_mtimer_delay_us(1);
+
+    regval = getreg32(BFLB_PDS_BASE + PDS_USB_CTL_OFFSET);
+    regval |= PDS_REG_USB_EXT_SUSP_N;
+    putreg32(regval, BFLB_PDS_BASE + PDS_USB_CTL_OFFSET);
+
+    /* wait UCLK 1.2ms */
+    bflb_mtimer_delay_ms(3);
+
+    regval = getreg32(BFLB_PDS_BASE + PDS_USB_CTL_OFFSET);
+    regval |= PDS_REG_USB_SW_RST_N;
+    putreg32(regval, BFLB_PDS_BASE + PDS_USB_CTL_OFFSET);
+
+    bflb_mtimer_delay_ms(2);
+}
+
+void usb_hc_low_level_init(void)
+{
+    uint32_t regval;
+
+    bflb_usb_phy_init();
+
+    bflb_irq_attach(37, USBH_IRQHandler, NULL);
+    bflb_irq_enable(37);
+
+    /* enable device-A for host */
+    regval = getreg32(BFLB_PDS_BASE + PDS_USB_CTL_OFFSET);
+    regval &= ~PDS_REG_USB_IDDIG;
+    putreg32(regval, BFLB_PDS_BASE + PDS_USB_CTL_OFFSET);
+
+    regval = getreg32(BLFB_USB_BASE + USB_OTG_CSR_OFFSET);
+    regval |= USB_A_BUS_DROP_HOV;
+    regval &= ~USB_A_BUS_REQ_HOV;
+    putreg32(regval, BLFB_USB_BASE + USB_OTG_CSR_OFFSET);
+
+    bflb_mtimer_delay_ms(10);
+
+    /* enable vbus and bus control */
+    regval = getreg32(BLFB_USB_BASE + USB_OTG_CSR_OFFSET);
+    regval &= ~USB_A_BUS_DROP_HOV;
+    regval |= USB_A_BUS_REQ_HOV;
+    putreg32(regval, BLFB_USB_BASE + USB_OTG_CSR_OFFSET);
+
+    regval = getreg32(BLFB_USB_BASE + USB_GLB_INT_OFFSET);
+    regval |= USB_MDEV_INT;
+    regval |= USB_MOTG_INT;
+    regval &= ~USB_MHC_INT;
+    putreg32(regval, BLFB_USB_BASE + USB_GLB_INT_OFFSET);
+}
+
+uint8_t usbh_get_port_speed(const uint8_t port)
+{
+    uint8_t speed = 3;
+
+    speed = (getreg32(BLFB_USB_BASE + USB_OTG_CSR_OFFSET) & USB_SPD_TYP_HOV_POV_MASK) >> USB_SPD_TYP_HOV_POV_SHIFT;
+
+    if (speed == 0) {
+        return USB_SPEED_FULL;
+    } else if (speed == 1) {
+        return USB_SPEED_LOW;
+    } else if (speed == 2) {
+        return USB_SPEED_HIGH;
+    }
+    return USB_SPEED_HIGH;
+}