update(port/ch32): update irqhandler name

Signed-off-by: sakumisu <[email protected]>

4 files changed, 32 insertions, 28 deletions

diff --git a/port/ch32/ch585_usbhs_dc.c b/port/ch32/ch585_usbhs_dc.c
index 1ccdfe3e..e066ffb9 100644
--- a/port/ch32/ch585_usbhs_dc.c
+++ b/port/ch32/ch585_usbhs_dc.c
@@ -7,10 +7,6 @@
 #define USB_BASE        0x40009000u
 #define CH585_USBHS_DEV ((USBHSD_TypeDef *)USB_BASE)
 
-#ifndef USBD_IRQHandler
-#define USBD_IRQHandler USB2_DEVICE_IRQHandler //use actual usb irq name instead
-#endif
-
 #define R16_PIN_CONFIG (*((PUINT16V)0x4000101A))
 #define R32_PIN_CONFIG (*((PUINT32V)0x40001018)) // RW, I/O pin configuration
 #define RB_PIN_USB2_EN 0x20
@@ -493,9 +489,7 @@ static inline void usb_trans_end_process(void)
  * @param[in]        None
  * @retval           None
  */
-__attribute__((interrupt("WCH-Interrupt-fast")))
-__attribute__((section(".highcode"))) void
-USBD_IRQHandler(void)
+void USBD_IRQHandler(uint8_t busid)
 {
     volatile uint8_t intflag = 0;
     intflag = CH585_USBHS_DEV->INT_FG;
@@ -522,4 +516,11 @@ USBD_IRQHandler(void)
     } else {
         CH585_USBHS_DEV->INT_FG = intflag;
     }
+}
+
+void USB2_DEVICE_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast"))) __attribute__((section(".highcode")));
+void USB2_DEVICE_IRQHandler(void)
+{
+    extern void USBD_IRQHandler(uint8_t busid);
+    USBD_IRQHandler(0);
 }
\ No newline at end of file
diff --git a/port/ch32/usb_ch58x_dc_usbfs.c b/port/ch32/usb_ch58x_dc_usbfs.c
index 5771efb6..c7efb84e 100644
--- a/port/ch32/usb_ch58x_dc_usbfs.c
+++ b/port/ch32/usb_ch58x_dc_usbfs.c
@@ -17,10 +17,6 @@
 #endif
 #define CH58x_USBFS_DEV ((USB_FS_TypeDef *)USBD)
 
-#ifndef USBD_IRQHandler
-#define USBD_IRQHandler USB_IRQHandler //use actual usb irq name instead
-#endif
-
 /*!< 8-bit value of endpoint control register */
 #define EPn_CTRL(epid) \
     *(volatile uint8_t *)(&(CH58x_USBFS_DEV->UEP0_CTRL) + epid * 4 + (epid / 5) * 48)
@@ -456,9 +452,7 @@ int usbd_ep_start_read(uint8_t busid, const uint8_t ep, uint8_t *data, uint32_t
  * @param[in]        None
  * @retval           None
  */
-__attribute__((interrupt("WCH-Interrupt-fast")))
-__attribute__((section(".highcode"))) void
-USBD_IRQHandler(void)
+void USBD_IRQHandler(uint8_t busid)
 {
     volatile uint8_t intflag = 0;
     intflag = CH58x_USBFS_DEV->USB_INT_FG;
@@ -637,3 +631,10 @@ USBD_IRQHandler(void)
         CH58x_USBFS_DEV->USB_INT_FG = intflag;
     }
 }
+
+void USB_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast"))) __attribute__((section(".highcode")));
+void USB_IRQHandler(void)
+{
+    extern void USBD_IRQHandler(uint8_t busid);
+    USBD_IRQHandler(0);
+}
\ No newline at end of file
diff --git a/port/ch32/usb_dc_usbfs.c b/port/ch32/usb_dc_usbfs.c
index 7aabd411..1340766c 100644
--- a/port/ch32/usb_dc_usbfs.c
+++ b/port/ch32/usb_dc_usbfs.c
@@ -10,10 +10,6 @@
 #error "usb fs do not support hs"
 #endif
 
-#ifndef USBD_IRQHandler
-#define USBD_IRQHandler OTG_FS_IRQHandler //use actual usb irq name instead
-#endif
-
 #ifndef USB_NUM_BIDIR_ENDPOINTS
 #define USB_NUM_BIDIR_ENDPOINTS 8
 #endif
@@ -49,8 +45,6 @@ struct ch32_usbfs_udc {
 volatile bool ep0_rx_data_toggle;
 volatile bool ep0_tx_data_toggle;
 
-void USBD_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
-
 __WEAK void usb_dc_low_level_init(void)
 {
 }
@@ -262,7 +256,7 @@ int usbd_ep_start_read(uint8_t busid, const uint8_t ep, uint8_t *data, uint32_t
     return 0;
 }
 
-void USBD_IRQHandler(void)
+void USBD_IRQHandler(uint8_t busid)
 {
     uint32_t ep_idx = 0, token, write_count, read_count;
     uint8_t intflag = 0;
@@ -407,3 +401,10 @@ void USBD_IRQHandler(void)
         USBFS_DEVICE->INT_FG = intflag;
     }
 }
+
+void OTG_FS_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
+void OTG_FS_IRQHandler(void)
+{
+    extern void USBD_IRQHandler(uint8_t busid);
+    USBD_IRQHandler(0);
+}
\ No newline at end of file
diff --git a/port/ch32/usb_dc_usbhs.c b/port/ch32/usb_dc_usbhs.c
index a8d3036a..0b8bff5e 100644
--- a/port/ch32/usb_dc_usbhs.c
+++ b/port/ch32/usb_dc_usbhs.c
@@ -6,10 +6,6 @@
 #include "usbd_core.h"
 #include "usb_ch32_usbhs_reg.h"
 
-#ifndef USBD_IRQHandler
-#define USBD_IRQHandler USBHS_IRQHandler //use actual usb irq name instead
-#endif
-
 #ifndef USB_NUM_BIDIR_ENDPOINTS
 #define USB_NUM_BIDIR_ENDPOINTS 16
 #endif
@@ -43,8 +39,6 @@ struct ch32_usbhs_udc {
     struct ch32_usbhs_ep_state out_ep[USB_NUM_BIDIR_ENDPOINTS]; /*!< OUT endpoint parameters */
 } g_ch32_usbhs_udc;
 
-void USBHS_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
-
 volatile uint8_t mps_over_flag = 0;
 volatile bool ep0_rx_data_toggle;
 volatile bool ep0_tx_data_toggle;
@@ -255,7 +249,7 @@ int usbd_ep_start_read(uint8_t busid, const uint8_t ep, uint8_t *data, uint32_t
     return 0;
 }
 
-void USBD_IRQHandler(void)
+void USBD_IRQHandler(uint8_t busid)
 {
     uint32_t ep_idx, token, write_count, read_count;
     uint8_t intflag = 0;
@@ -385,3 +379,10 @@ void USBD_IRQHandler(void)
         USBHS_DEVICE->INT_FG = USBHS_DETECT_FLAG;
     }
 }
+
+void USBHS_IRQHandler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
+void USBHS_IRQHandler(void)
+{
+    extern void USBD_IRQHandler(uint8_t busid);
+    USBD_IRQHandler(0);
+}
\ No newline at end of file