feat(port/ehci): add t113 glue

Signed-off-by: sakumisu <[email protected]>

2 files changed, 220 insertions, 1 deletions

diff --git a/port/ehci/README.md b/port/ehci/README.md
index 8160c65d..ede4cab8 100644
--- a/port/ehci/README.md
+++ b/port/ehci/README.md
@@ -12,7 +12,7 @@
 
 ### AllwinnerTech
 
-- F133
+- F133/T113
 
 ### Nuvoton
 
diff --git a/port/ehci/usb_glue_t113.c b/port/ehci/usb_glue_t113.c
new file mode 100644
index 00000000..99927acb
--- /dev/null
+++ b/port/ehci/usb_glue_t113.c
@@ -0,0 +1,219 @@
+/*
+ * Copyright (c) 2025, YC113
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+#include "usbh_core.h"
+#include "usb_hc_ehci.h"
+#include "usb_hc_ohci.h"
+
+#include "interrupt.h"
+#include "drv_reg_base.h"
+#include "drv_clock.h"
+
+#if !defined(CONFIG_USB_EHCI_WITH_OHCI)
+#error "t113 must define CONFIG_USB_EHCI_WITH_OHCI for ls/fs device"
+#endif
+
+#if CONFIG_USBHOST_MAX_BUS != 2
+#error "t113 has 2 usb host controller"
+#endif
+
+#if CONFIG_USB_OHCI_HCOR_OFFSET != 0x400
+#error "t113 CONFIG_USB_OHCI_HCOR_OFFSET must be 0x400"
+#endif
+
+#if defined(CONFIG_USB_EHCI_HCOR_RESERVED_DISABLE)
+#error "t113 usb ehci register need reserved"
+#endif
+
+#if !defined(CONFIG_USB_EHCI_CONFIGFLAG)
+#error "t113 usb ehci has configflag register"
+#endif
+
+#if defined(CONFIG_USB_EHCI_ISO)
+#error "t113 usb ehci no iso register"
+#endif
+
+void usb_select_phyTohci(void)
+{
+    *(volatile rt_uint32_t *)(USB0_OTG_BASE_ADDR + 0x420) &= ~(1 << 0);
+}
+
+void usb_gate_open(rt_uint8_t busid)
+{
+    rt_uint32_t addr;
+
+    /* otg bus reset and gate open */
+    if (busid == 0)
+        usb_select_phyTohci();
+
+    /* reset phy */
+    addr = (rt_uint32_t)&CCU->usb0_clk + busid * 4;
+    *(volatile rt_uint32_t *)addr &= ~(1 << 30);
+    sdelay(10);
+    *(volatile rt_uint32_t *)addr |= 1 << 30;
+    sdelay(10);
+
+    /* ehci bus reset */
+    CCU->usb_bgr &= ~((1 << 20) << busid);
+    sdelay(10);
+    CCU->usb_bgr |= (1 << 20) << busid;
+    sdelay(10);
+
+    /* ehci gate open */
+    CCU->usb_bgr |= (1 << 4) << busid;
+
+    /* ohci bus reset */
+    CCU->usb_bgr &= ~((1 << 16) << busid);
+    sdelay(10);
+    CCU->usb_bgr |= (1 << 16) << busid;
+    sdelay(10);
+
+    /* ohci gate open */
+    CCU->usb_bgr |= 1 << busid;
+
+    sdelay(10);
+
+    /* clock enable */
+    *(volatile rt_uint32_t *)addr &= ~(3 << 24);
+    *(volatile rt_uint32_t *)addr |= (1 << 31) | (1 << 24);
+
+    USB_LOG_DBG("usb%d gate : %X, clock : %X\n", busid, CCU->usb_bgr, *(volatile rt_uint32_t *)addr);
+}
+
+void usb_clean_siddp(struct usbh_bus *bus)
+{
+    *(volatile rt_uint32_t *)(bus->hcd.reg_base + 0x810) &= ~(1 << 3);
+}
+
+static void usb_new_phyx_tp_write(struct usbh_bus *bus, int addr, int data, int len)
+{
+    rt_uint32_t base = bus->hcd.reg_base;
+
+    for (int i = 0; i < len; i++) {
+        *(volatile rt_uint8_t *)(base + 0x810) |= 1 << 1;
+
+        *(volatile rt_uint8_t *)(base + 0x810 + 1) = addr + i;
+
+        *(volatile rt_uint8_t *)(base + 0x810) &= ~(1 << 0);
+
+        *(volatile rt_uint8_t *)(base + 0x810) &= ~(1 << 7);
+        *(volatile rt_uint8_t *)(base + 0x810) |= (data & 0x1) << 7;
+
+        *(volatile rt_uint8_t *)(base + 0x810) |= 1 << 0;
+
+        *(volatile rt_uint8_t *)(base + 0x810) &= ~(1 << 0);
+
+        *(volatile rt_uint8_t *)(base + 0x810) &= ~(1 << 1);
+
+        data >>= 1;
+    }
+}
+
+void usb_new_phy_init(struct usbh_bus *bus)
+{
+    rt_int32_t value = 0;
+    rt_uint32_t efuse_val = 0x1E5080F;
+
+    usb_new_phyx_tp_write(bus, 0x1C, 0x0, 0x03);
+
+    /* vref mode */
+    usb_new_phyx_tp_write(bus, 0x60, 0x0, 0x01);
+
+    value = (efuse_val & 0x3C0000) >> 18;
+    usb_new_phyx_tp_write(bus, 0x44, value, 0x04);
+
+    value = (efuse_val & 0x1C00000) >> 22;
+    usb_new_phyx_tp_write(bus, 0x36, value, 0x03);
+}
+
+void usb_hci_set_passby(struct usbh_bus *bus)
+{
+    /* AHB Master interface INCR16 enable */
+    /* AHB Master interface INCR8 enable */
+    /* AHB Master interface burst type INCR4 enable */
+    /* AHB Master interface INCRX align enable */
+    /* ULPI bypass enable */
+    *(volatile rt_uint32_t *)(bus->hcd.reg_base + 0x800) |= (1 << 11) | (1 << 10) | (1 << 9) | (1 << 8) | (1 << 0);
+}
+
+void t113_ehci_isr(int vector, void *arg)
+{
+    struct usbh_bus *bus = (struct usbh_bus *)arg;
+
+    USB_LOG_DBG("t113_ehci_isr");
+
+    extern void USBH_IRQHandler(uint8_t busid);
+    USBH_IRQHandler(bus->hcd.hcd_id);
+}
+
+void t113_ohci_isr(int vector, void *arg)
+{
+    struct usbh_bus *bus = (struct usbh_bus *)arg;
+
+    USB_LOG_DBG("t113_ohci_isr");
+
+    extern void OHCI_IRQHandler(uint8_t busid);
+    OHCI_IRQHandler(bus->hcd.hcd_id);
+}
+
+void usb_hc_low_level_init(struct usbh_bus *bus)
+{
+    int vector;
+    RT_ASSERT(bus->busid <= 1);
+
+    usb_gate_open(bus->busid);
+    usb_clean_siddp(bus);
+    usb_hci_set_passby(bus);
+
+    /* register EHCI interrupt callback */
+    vector = T113_IRQ_USB0_EHCI + (bus->busid > 0 ? 3 : 0);
+    rt_hw_interrupt_install(vector, t113_ehci_isr, bus, RT_NULL);
+    rt_hw_interrupt_umask(vector);
+
+    /* register OHCI interrupt callback */
+    rt_hw_interrupt_install(vector + 1, t113_ohci_isr, bus, RT_NULL);
+    rt_hw_interrupt_umask(vector + 1);
+
+    USB_LOG_DBG("usb%d vector : %d, phy : %X\n", bus->busid, vector, *(volatile rt_uint32_t *)(bus->hcd.reg_base + 0x810));
+    USB_LOG_DBG("usb%d hc low level init success\n", bus->busid);
+}
+
+uint8_t usbh_get_port_speed(struct usbh_bus *bus, const uint8_t port)
+{
+    /* Defined by individual manufacturers */
+    uint32_t regval;
+
+    regval = EHCI_HCOR->portsc[port - 1];
+    if ((regval & EHCI_PORTSC_LSTATUS_MASK) == EHCI_PORTSC_LSTATUS_KSTATE)
+        return USB_SPEED_LOW;
+
+    if (regval & EHCI_PORTSC_PE)
+        return USB_SPEED_HIGH;
+    else
+        return USB_SPEED_FULL;
+}
+
+int __usbh_init(void)
+{
+#ifdef T113_USING_USB0_HOST
+    /* USB0 MSC test OK */
+    usbh_initialize(0, USB0_BASE_ADDR);
+#endif
+
+#ifdef T113_USING_USB1_HOST
+    /* USB1 MSC test OK */
+    usbh_initialize(1, USB1_BASE_ADDR);
+#endif
+    return 0;
+}
+
+#ifdef PKG_CHERRYUSB_HOST
+
+#include <rtthread.h>
+#include <rtdevice.h>
+
+INIT_ENV_EXPORT(__usbh_init);
+
+#endif