docs: release v1.6.0v1.6.0

Signed-off-by: sakumisu <[email protected]>

1 files changed, 63 insertions, 0 deletions

diff --git a/docs/source/quick_start/migration.rst b/docs/source/quick_start/migration.rst
new file mode 100644
index 00000000..10f2ef7e
--- /dev/null
+++ b/docs/source/quick_start/migration.rst
@@ -0,0 +1,63 @@
+部分改动迁移指南
+========================
+
+
+usbh_initialize
+------------------
+
+usbh_initialize 从 v1.6.0 开始新增 event_handler 参数，通常不需要使用，可以传入 NULL。
+
+dwc2 glue st
+----------------
+
+dwc2 从 v1.5.0 开始 glue 文件内置底层初始化，比如 `usb_dc_low_level_init`，底层依赖 `HAL_PCD_MspInit` 和 `HAL_HCD_MspInit`，必须使用 stm32cubemx 生成。第三方平台不保证有这些函数实现，自行检查。
+
+
+dwc2 glue
+----------------
+
+dwc2 从 v1.5.1 开始新增 `struct dwc2_user_params`，用于实现多 dwc2 port 不同配置。并替代 `usbd_get_dwc2_gccfg_conf` 和 `usbh_get_dwc2_hccfg_conf` 函数，
+并增加 `dwc2_get_user_params` 函数实现，举例如下：
+
+.. code-block:: C
+
+    #ifndef CONFIG_USB_DWC2_CUSTOM_PARAM
+    void dwc2_get_user_params(uint32_t reg_base, struct dwc2_user_params *params)
+    {
+        memcpy(params, &param_common, sizeof(struct dwc2_user_params));
+    #ifdef CONFIG_USB_DWC2_CUSTOM_FIFO
+        struct usb_dwc2_user_fifo_config s_dwc2_fifo_config;
+
+        dwc2_get_user_fifo_config(reg_base, &s_dwc2_fifo_config);
+
+        params->device_rx_fifo_size = s_dwc2_fifo_config.device_rx_fifo_size;
+        for (uint8_t i = 0; i < MAX_EPS_CHANNELS; i++) {
+            params->device_tx_fifo_size[i] = s_dwc2_fifo_config.device_tx_fifo_size[i];
+        }
+    #endif
+    }
+    #endif
+
+host serial
+----------------
+
+从 v1.6.0 开始，主机增加 host serial 框架，用于统一所有类串口设备。以下 API 需要使用新 serial API 替换：
+
+.. code-block:: C
+
+    int usbh_xxx_set_line_coding(struct usbh_xxx *xxx_class, struct cdc_line_coding *line_coding);
+    int usbh_xxx_get_line_coding(struct usbh_xxx *xxx_class, struct cdc_line_coding *line_coding);
+    int usbh_xxx_set_line_state(struct usbh_xxx *xxx_class, bool dtr, bool rts);
+
+    int usbh_xxx_bulk_in_transfer(struct usbh_xxx *xxx_class, uint8_t *buffer, uint32_t buflen, uint32_t timeout);
+    int usbh_xxx_bulk_out_transfer(struct usbh_xxx *xxx_class, uint8_t *buffer, uint32_t buflen, uint32_t timeout);
+
+替换为：
+
+.. code-block:: C
+
+    struct usbh_serial *usbh_serial_open(const char *devname, uint32_t open_flags);
+    int usbh_serial_close(struct usbh_serial *serial);
+    int usbh_serial_control(struct usbh_serial *serial, int cmd, void *arg);
+    int usbh_serial_write(struct usbh_serial *serial, const void *buffer, uint32_t buflen);
+    int usbh_serial_read(struct usbh_serial *serial, void *buffer, uint32_t buflen);