| Age | Commit message (Collapse) | Author |
|---|
|
Correct the compiled FW_PAYLOAD firmware ELF filename.
Signed-off-by: Jacob Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Now opensbi can run at any address via dynamic relocation. We can
remove FW_TEXT_START.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Tested-by: Anup Patel <[email protected]>
|
|
Adding relocatable address brings new configuration options for jump
and payload firmwares. Describe these new options in documentation.
Signed-off-by: Inochi Amaoto <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The base of .text is defined by `FW_TEXT_START`, not `FW_TEXT_BASE`.
Signed-off-by: Hoa Nguyen <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Since
commit 9c07c513aa9b ("firmware:Remove FW_PAYLOAD_FDT_PATH compile-time option"),
the section where FDT would be embedded in has changed from *.text* to *.rodata*,
but some places in fw_payload.md and fw.md are still *.text*.
This patch updates the document.
Signed-off-by: Yangjie Zhang <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
We update all documentation files to:
1) Remove references to platform specific config.mk file since it is
has been removed.
2) Add details about platform specific configs/defconfig and Kconfig
files mandatory for each platform.
3) Add required packages in top-level README.md
4) Fix typo releated to object.mk in docs/platform/platform.md
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
The FW_PAYLOAD_FDT_PATH compile-time option is replaced by
FW_FDT_PATH compile-time option which is more flexible and
common across all OpenSBI firmwares.
This patch removes FW_PAYLOAD_FDT_PATH and updates related
documentation to use FW_FDT_PATH.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Now that no platform is using FW_PAYLOAD_FDT mechanism, we
remove related code from Makefile and related documentation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Doxygen does not support italic text in page title so fix
some of the markdown files accordingly.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
With QEMU v4.2 RISC-V changes to improve the emulation fidelity
of 'sifive_u' machine, OpenSBI v0.4 / U-Boot v2019.10 / Linux
kernel v5.3 images built for the SiFive HiFive Unleashed board
can be used out of the box without any special hack. Hence there
is no need for us to continue supporting such a special target in
OpenSBI. Going forward, sifive/fu540 platform can be used on both
real hardware and QEMU 'sifive_u' machine.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This patch updates FW_JUMP and FW_PAYLOAD documentation for the
case where FW_xyz_FDT_ADDR is not specified.
Signed-off-by: Liu Yibin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
- fix some broken hyperlinks
- add additional hyperlinks to references to external documents
- reformat some paragraphs to keep lines under 80 characters
- unify the enumeration style between different parts of the
documentation
- fix spelling/grammar mistakes
- extend the copyright notice in README.md to be the same as the
one in COPYING.BSD
Signed-off-by: Karsten Merker <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Signed-off-by: Atish Patra <[email protected]>
|
|
Reformatting, typos, and various corrections.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Signed-off-by: Atish Patra <[email protected]>
|
|
Use a more neutral term more representative of this payload intent.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Add rules to compile dts files into dtb files using the device tree
compiler (dtc). A platform can specify the DTS file to compile using
the platform-dtb-y variable. The flattened device tree binary file to be
used for building the final polatform firmware can be specified using
the new FW_PAYLOAD_FDT firmware configuration option to point to the
automatically compiled FDT file. Using the existing FW_PAYLOAD_FDT_PATH
configuration option is still possible and will take precedence over
the FW_PAYLOAD_FDT definition.
Signed-off-by: Damien Le Moal <[email protected]>
|
|
The firmware payload offset defined by FW_PAYLOAD_OFFSET must
specify a value large enough so the the payload does not overlap
with the base firmware data, bss and text. For platforms without
any strong requirement on the payload address, introduce the
FW_PAYLOAD_ALIGN build parameter to automatically place the payload
right after the base firmware at an address aligned with the defined
value.
Either FW_PAYLOAD_OFFSET or FW_PAYLOAD_ALIGN should be defined by a
platform configuration. If both FW_PAYLOAD_OFFSET and FW_PAYLOAD_ALIGN
are defined by a platform, FW_PAYLOAD_OFFSET has precedence and is
used for building the final firmawre image.
Using FW_PAYLOAD_ALIGN=4096 with the Kendryte platform rather than
the abitrary FW_PAYLOAD_OFFSET=0x10000 value reduces the final
firmware image size by about 20KB.
Add a description of the FW_PAYLOAD_ALIGN configuration parameter in the
fw_payload documentation file as well. And while at it, also fix
various grammar and style issues in that file..
Signed-off-by: Damien Le Moal <[email protected]>
|
|
This patch renames "blob" to "firmware" everywhere for better
and intutive naming.
Signed-off-by: Anup Patel <[email protected]>
|
