| Age | Commit message (Collapse) | Author |
|---|
|
The per-HART stack size for exception/interrupt handling is currently
hardcoded to 8192 bytes in SBI_PLATFORM_DEFAULT_HART_STACK_SIZE. This
may not be sufficient for platforms with deeper call stacks (e.g. those
enabling additional SBI extensions) or may be wasteful for minimal
platforms.
Introduce a HART_STACK_SIZE Kconfig option in lib/sbi/Kconfig with a
valid range of 8192 to 1048576 bytes and a default of 8192 bytes to
preserve existing behavior. The SBI_PLATFORM_DEFAULT_HART_STACK_SIZE
macro now resolves to CONFIG_HART_STACK_SIZE, allowing all platforms
to benefit from a single configuration knob without any source changes.
Signed-off-by: Oriol Catalan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/VI0P192MB3062735A6194BB6DA72083499E002@VI0P192MB3062.EURP192.PROD.OUTLOOK.COM
Signed-off-by: Anup Patel <[email protected]>
|
|
It's wrong to override the emulator callback in sbi_trap_emulate_load/
store. The function must respect the callback function passed in the
parameter. Hence, let the misaligned emulator callback decide when to
use sbi_misaligned_v_ld/st_emulator. To clean up things, also make the
following changes:
- Add the `insn` parameter to the callback. The trapping insn has been
fetched by the caller already, whether transformed or directly loaded,
thus saving the trouble in the callback. Note that you must not rely
on the length of the `insn`, as it can be a transformed one from tinst
- Also the `tcntx` is added, providing the callback with register values
to handle vector insn or other customized insns.
- Clarify that the read/write length (rlen/wlen) can be 0, in which
case it could be a vector load/store or some customized instruction.
The callback is responsible to handle it accordingly.
Also fixed issues in the sbi_misaligned_v_ld/st_emulator:
a. Redirect the trap when OPENSBI_CC_SUPPORT_VECTOR is not available.
b. Ensure the return code is >0 when no faults are redirected.
Fixes: c2acc5e5b0d8 ("lib: sbi_misaligned_ldst: Add handling of vector load/store")
Signed-off-by: Bo Gan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Tested-by: Anirudh Srinivasan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Instead of parsing ISA extensions separately for each hart in the
generic_extensions_init() function, it is better to parse ISA extensions
for all available harts in the cold boot path. Also, this allows us
to remove fdt_isa_bitmap from scratch space and directly initialize
"extensions" in struct sbi_hart_features for each hart.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The location of the RNMI/E trap vectors in the Smrnmi extension is
implementation-defined, so platforms with vendor-specific NMI vector
mechanisms must install the firmware's NMI entry points themselves.
Add an smrnmi_handlers_init() callback to sbi_platform_operations that
receives the firmware entry points and lets platform code install them
at the hardware-specific vector locations. Two pointers are passed:
- _trap_rnmi_handler: the dedicated RNMI entry point that saves
context using the Smrnmi MN* CSRs and returns via mnret.
- _trap_handler: the regular M-mode trap entry since RNME is taken
as a regular M-mode trap with NMIE=0.
When Smrnmi is present, install the platform's NMI vectors via the new
callback, initialize MNSCRATCH with the per-hart scratch pointer, and
set MNSTATUS.NMIE.
Smrnmi-enabled platforms must register smrnmi_handlers_init; if the
extension is detected but no callback is registered, sbi_panic() is
called since enabling NMIs without handlers in place would route
subsequent traps into nowhere.
Signed-off-by: Evgeny Voevodin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/88b1470e1e3348d454b4b995a11a85c01914f7af.1778176768.git.evvoevod@tenstorrent.com
Signed-off-by: Anup Patel <[email protected]>
|
|
Implement basic Resumable NMI (RNMI) handler support for the RISC-V
Smrnmi extension.
The new _trap_rnmi_handler assembly entry point saves context using the
Smrnmi MN* CSRs (MNSCRATCH, MNEPC, MNSTATUS, MNCAUSE) and returns via
mnret. It dispatches to sbi_trap_rnmi_handler(), which optionally calls
a platform-specific ops->rnmi_handler callback for actual NMI
processing. If no platform handler is registered or it fails, the
event is reported as an unhandled NMI.
The RNMI handler reuses the generic trap context structure but stores MN*
CSR values (MNEPC, MNSTATUS, MNCAUSE) into the corresponding generic
fields (mepc, mstatus, cause) for compatibility with existing trap
infrastructure.
Signed-off-by: Evgeny Voevodin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/050ae6d2762ba8d5b9dfb3cc1960a23aa3d6c549.1778176768.git.evvoevod@tenstorrent.com
Signed-off-by: Anup Patel <[email protected]>
|
|
By default the OpenSBI itself is covered by 2 memregions for RX/RW
sections. This is required by platforms with Smepmp to enforce
proper permissions in M mode. Note: M-mode only regions can't
have RWX permissions with Smepmp. Platforms with traditional PMPs
won't be able to benefit from it, as both regions are effectively
RWX in M mode, but usually it's harmless to so. Now we provide
these platforms with an option to disable this logic. It saves 1
PMP entry. For platforms really in short of PMPs, it does make a
difference.
Note: Platform requesting single OpenSBI memregion must be using
traditional (old) PMP. We expect the platform code to do
the right thing.
Signed-off-by: Bo Gan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The platform specfic IPI init is not need anymore because using
IPI device rating multiple IPI devices can be registered in any
order as part of the platform specific early init.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Tested-by: Nick Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Allow platforms to implement platform specific PMP setup and
PMP disable functions which are called before actual PMP CSRs
are configured.
Also, implement pmp_set() and pmp_disable() for MIPS P8700.
Signed-off-by: Chao-ying Fu <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Set the scratch allocation alignment to cacheline size specified by
riscv,cbom-block-size in the DTS file to avoid two atomic variables
from the same cache line causing livelock on some platforms. If the
cacheline is not specified, we set it a default value.
Signed-off-by: Raj Vishwanathan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Now that the generic platform only sets .vendor_ext_provider if the
function is really implemented, there is no need for a separate hook to
check if a vendor extension is implemented.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add a macro assert_member_offset() to perform structure member offset
checking.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Simplify the code and improve consistency by using the new macros where
possible. sbi_hart_count() obsoletes sbi_scratch_last_hartindex().
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The internal limit on the number of harts is SBI_HARTMASK_MAX_BITS, as
this value determines the size of various bitmaps and arrays (including
hartindex_to_hartid_table and hartindex_to_scratch_table). Clamp the
value provided by the platform, and drop the extra array element.
Update the documentation to indicate that hart_index2id must be sized
based on hart_count, and that hart indexes must be contiguous. As of
commit 5e90e54a1a53 ("lib: utils:Check that hartid is valid"), there is
no restriction on the valid hart ID values.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Introduce SBI Message Proxy (MPXY) framework which allows platform specific
code or drivers to register message protocol specific channels.
This framework enables the supervisor software to send messages belonging
to different message protocols via OpenSBI firmware.
Signed-off-by: Rahul Pathak <[email protected]>
Co-developed-by: Himanshu Chauhan <[email protected]>
Signed-off-by: Himanshu Chauhan <[email protected]>
Co-developed-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
Now that driver lifecycle is managed from within the SBI irqchip core,
platforms need only to initialize the driver once during cold init.
Remove the remaining platform hooks that are no longer used.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Now that the SBI IPI core clears IPIs at warm boot in a generic way,
none of the drivers or platforms use these hooks, and we can remove
them. Platforms need only to initialize the driver once during cold
init. If other hooks are needed in the future, they can be added to
struct sbi_ipi_device.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
DBTR introduce a big heap allocation to store hart state, this is
allocated percpu and needs big space when CPU number is high.
Increase the percpu part to fix this problem, and decrease the
fixed part to avoid too big heap size.
Fixes: 97f234f (lib: sbi: Introduce the SBI debug triggers extension support)
Signed-off-by: Inochi Amaoto <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Now that driver lifecycle is managed from within the SBI timer core,
platforms need only to initialize the driver once during cold init.
Remove the remaining platform hooks that are no longer used.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Now that all platforms have been updated to initialize serial console
device in early_init(), the sbi_console_init() and console_init()
platform callback are redundant hence remove them.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-By: Himanshu Chauhan <[email protected]>
|
|
sbi_load/store_access_handler now tries to call platform emulators
if defined. Otherwise, redirects the fault. If the platform code
returns failure, this means the H/S/U has accessed the emulated
devices in an unexpected manner, which is very likely caused by
buggy code in H/S/U. We redirect the fault, so lower privileged
level can get notified, and act accordingly. (E.g., oops in Linux)
We let the handler truly fail if the trap was originated from M mode.
In this case, something must be very wrong and we should just fail.
Signed-off-by: Bo Gan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This patch allows the platform to define load/store emulators. This
enables a platform to trap-and-emulate special devices or filter
access to existing physical devices.
Signed-off-by: Bo Gan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Some of the upcoming SBI extensions (such as SSE) will directly
update register state so improve the prototype of ecall handler
to accommodate this. Further, this flexibility allows us to
push the trap redirection from sbi_ecall_handler() to the
sbi_ecall_legacy_handler().
Signed-off-by: Anup Patel <[email protected]>
|
|
For platform with high number of harts, it is better to auto detect a
suitable number of entries in tlb fifo. Since allocating tlb entry for
all online harts can reduce the wait time significantly, using the
number of the online harts can make most platforms happy. This auto
detection can avoid most duplicate code for setting tlb fifo size.
Signed-off-by: Inochi Amaoto <[email protected]>
Acked-by: Guo Ren <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The hartid to hartindex mapping is now tracked in sbi_scratch so we
don't need sbi_platform_hart_index() and sbi_platform_hart_invalid()
functions hence let us remove them.
Signed-off-by: Anup Patel <[email protected]>
|
|
For some platforms with a particularly high number of harts, if the
tlb fifo is too small, it case harts to wait. Platforms should be
allowed to specify the size of the tlb fifo.
Signed-off-by: Xiang W <[email protected]>
Signed-off-by: Xing Xiaoguang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
We extend struct sbi_platform and struct sbi_scratch to allow platforms
specify the heap size to the OpenSBI firmwares. The OpenSBI firmwares
will use this information to determine the location of heap and provide
heap base address in per-HART scratch space.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
|
|
The extid parameter of vendor_ext_provider() is redundant so let us
remove it.
Signed-off-by: Anup Patel <[email protected]>
|
|
As-per the SBI specification, the lower 24bits of the SBI vendor
extension id is same as lower 24bits of the mvendorid CSR.
We update the SBI vendor extension id checking based on above.
Signed-off-by: Anup Patel <[email protected]>
|
|
We add an optional cold_boot_allowed() platform callback which allows
platform support to decide which HARTs can do cold boot initialization.
If this platform callback is not available then any HART can do cold
boot initialization.
Signed-off-by: Anup Patel <[email protected]>
|
|
C language standard uses true/false for the boolean type.
Let's switch to that for better language compatibility.
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Tested-by: Samuel Holland <[email protected]>
|
|
The platform-specific extension_init callback is supposed to
set specific things for the platform opensbi is running on.
So it's also the right place to override specific hart_features
if needed - when it's know that autodetection has provided
wrong results for example.
Suggested-by: Atish Patra <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Guo Ren <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
We add platform specific extensions_init() callback which allows
platforms to populate HART extensions for each HART. For example,
the generic platform can populate HART extensions from HART ISA
string described in DeviceTree.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Add static detection to prevent the modification of struct sbi_platform
from forgetting the modification of SBI_PLATFORM_xxx_OFFSET
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
We introduce nascent_init() platform callback which will allow
platforms to do very early initialization of platform specific
per-HART CSRs and per-HART devices.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
A platform hook to initialize PMU allows platform vendors to provide
their own mechanism to define pmu event-counter mappings in addition
to the DT based approach.
Another platform hook that allows platform vendors customize the
final mhpmevent value configuration.
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Atish Patra <[email protected]>
|
|
Instead of having hsm_start(), hsm_stop() and hsm_suspend()
callbacks in platform operations, it will be much simpler for
HSM driver to directly register these operations as a device
to the sbi_hsm implementation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
Instead of having system_reset_check() and system_reset() callbacks
in platform operations, it will be much simpler for reset driver to
directly register these operations as a device to the sbi_system
implementation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
Instead of having ipi_send() and ipi_clear() callbacks in
platform operations, it will be much simpler for ipi driver
to directly register these operations as a device to sbi_ipi
implementation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
Instead of having timer_value(), timer_event_start(), and
timer_event_stop() callbacks in platform operations, it will
be much simpler for timer driver to directly register these
operations as device to the sbi_timer implementation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
|
|
Instead of having console_putc() and console_getc() callbacks in
platform operations, it will be much simpler for console driver to
directly register these operations as device to the sbi_console
implementation.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
We now have sbi_domain_root_add_memregion() which allows platform
support to add root domain regions at boot-time so let's remove
the domains_root_regions() platform callback which was added
for this purpose.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
GCC has already a predefined macro __ASSEMBLER__ therefore, it can be
used without the need to define a new flag with -D__ASSEMBLY__.
This is useful when adding the library to projects having a build
system such one can build without the need to make changes.
THe build system does not use the Makefile in the sources tree.
Signed-off-by: Marouene Boubakri <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
|
|
We add hart_suspend() callback in platform operations which will
be used by HSM implementation to enter retentive or non-retentive
suspend state.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We don't need to pack struct sbi_platform and sbi_platform_operations
because GCC ensures member offsets match member data type irrespective
to the target system (RV32 or RV64). This also allows GCC to generate
more optimized instruction sequence when accessing members of struct
sbi_platform and struct sbi_platform_operations.
Reported-by: Paul Campbell <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Currently, the root domain memory regions are fixed in generic
code but some of the platforms may want to explicitly define
memory regions for the root domain.
This patch adds optional domains_root_regions() platform callback
which platforms can use to provide platform specific root domain
memory regions. Due to this changes, the root domain should also
undergo all sanity checks (just like regular domain) so we use
sbi_domain_register() to register root domain.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We had added args pointer in ecall handler to ensure that ecall
handler only implements functionality and does not deal with
SBI calling convention. This also helped us to keep SBI calling
convention related code in one place at sbi_ecall_handler().
The Keystone Enclavce project needs access to the trap regsiters
in their ecall handler so that they can context switch enclaves
in custom SBI calls. To help the Keystone Enclave project, we
replace the args pointer in ecall handler parameter with a const
pointer to trap registers.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The domain_get() platform callback function is now redundant
because fdt_domain_populate() register new domain explicitly
using the sbi_domain_register() function.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We introduce domains_init() platform operation which can be used by
platform support to initialize/populate domains in the coldboot path.
The domains_init() is called late in the coldboot sequence from the
sbi_domain_finalize() so sbi_printf() can be used by platform support
to print errors/warnings at time of populating domains.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
To implement the SBI SRST extension, we need two platform operations
for system reset:
1) system_reset_check() - This operation will check whether given
reset type and reason are supported by the platform
2) system_reset() - This operation will do the actual platform
system reset and it will not return if reset type and reason
are supported by the platform
This patch updates system reset related code everywhere as-per above.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We can now use the standard SBI SRST extension reset types instead
of the opensbi specific (SBI_PLATFORM_RESET_xyz) reset types hence
remove related opensbi specific defines. The "platform_" prefix of
the reset type parameter of sbi_system_reset() function should also
be removed.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Alistair Francis <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
