| Age | Commit message (Collapse) | Author |
|---|
|
Since the FDT is not modified during driver initialization, node offsets
are just as suitable as phandles for use as identifiers: they are stable
and unique. With this change, it is no longer necessary to pass the
phandle to the driver init functions, so these init functions now use
the same prototype as other kinds of drivers.
This matches what is already done for I2C adapters.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Since the FDT is not modified during driver initialization, node offsets
are just as suitable as phandles for use as identifiers: they are stable
and unique. With this change, it is no longer necessary to pass the
phandle to the driver init functions, so these init functions now use
the same prototype as other kinds of drivers.
This matches what is already done for I2C adapters.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This function looks up a chip's driver by matching known drivers against
chip->driver, but that is equivalent to using chip->driver directly.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Now that driver lifecycle is managed from within the SBI timer core,
platforms need only to initialize the driver once during cold init.
Remove the remaining platform hooks that are no longer used.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Currently, the platform's timer device is tracked in two places: the
core SBI implementation has `timer_dev`, and the FDT timer layer has
`current_driver`. The latter is used for warm initialization of the
timer device. However, this warm init is not specific to FDT-based
platforms; other platforms call exactly the same functions from the
same point in the boot sequence.
The code is simplified and made common across platforms by treating warm
init and exit as properties of the driver, not the platform. Then the
platform's only role is to select and prepare a driver during cold boot.
For now, only add a .warm_init hook, since none of the existing drivers
need an .exit hook. It could be added in the future if needed.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This reduces firmware size for SoCs which do not use this driver.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Use sbi_domain_memregion_init() at the time of parsing domains from
FDT so that sbi_domain_memregion_init() is always used for setting
up all memregions.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
The sbi_domain_root_add_memrange() should be preferred for creating
multiple memregions over a range. Update APLIC driver to use
sbi_domain_root_add_memrange() instead of explicitly registering
memregions.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
The sbi_domain_root_add_memrange() should be preferred for creating
multiple memregions over a range. Update IMSIC driver to use
sbi_domain_root_add_memrange() instead of explicitly registering
memregions.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
The sbi_domain_root_add_memrange() should be preferred for creating
multiple memregions over a range. Update ACLINT mswi driver to use
sbi_domain_root_add_memrange() instead of explicitly registering
memregions.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
Since commit 78c667b6fc07 ("lib: sbi: Prefer hartindex over hartid in
IPI framework"), The .ipi_clear callback functions take a hart index,
not a hartid. However, these warm_init functions were never updated.
Fixes: 78c667b6fc07 ("lib: sbi: Prefer hartindex over hartid in IPI framework")
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This removes redundant hartid to hartindex conversions from four call
sites and provides a net reduction in code size.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This avoids needing to map a hartid to a hart index.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
In `csr_read_allowed` and `csr_write_allowed` macros, has already
converted second param to `ulong`. So delete redundant `ulong`
where uses csr_read/write_allowed macros.
Signed-off-by: Zhang RunMin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The domain_support.md documentation states that "the HART to domain instance
assignment can be parsed from the device tree using *optional* DT property
opensbi-domain in each CPU DT node". However, the current implementation does
not treat this parameter as optional when determining which HARTs to assign to
a freshly discovered domain from the device tree, causing an effect where every
HART in the system must be explicitly assigned to a domain only if a domain is
specified in the device tree. Instead, this patch simply ignores CPUs that do
not specify a domain, and does not attempt to assign them into the recently
discovered domain.
Signed-off-by: Gregor Haas <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Beautify multi-line printing.
Signed-off-by: Leo Yu-Chi Liang <[email protected]>
Reviewed-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
%s/hard/hart
Signed-off-by: Leo Yu-Chi Liang <[email protected]>
Reviewed-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Indicate that this function does not modify the FDT blob, and
deduplicate the call to fdt_get_address().
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Indicate that this function does not modify the FDT blob, and
deduplicate the call to fdt_get_address().
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Indicate that none of these functions modify the devicetree by
constifying the parameter type.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Indicate that none of these functions modify the devicetree by
constifying the parameter type.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Indicate that none of these functions modify the devicetree by
constifying the parameter type.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Indicate that none of these functions modify the devicetree by
constifying the parameter type.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Indicate that none of these functions modify the devicetree by
constifying the parameter type.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Indicate that none of these functions modify the devicetree by
constifying the parameter type.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Indicate that none of these functions modify the devicetree by
constifying the parameter type.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Indicate that none of these functions modify the devicetree by
constifying the parameter type.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Distinguish between functions which modify the devicetree and those
which only extract information from it. Other than the iterators in
fdt_domain.c, this is a mechanical conversion.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
missing
The diagram shown below illustrates the boot-flow involving OP-TEE OS
initialization.
(1)-----------+
| U-Boot SPL |
+------------+
|
v
(2)-------------------------------------------------------------+
| OpenSBI (fw_dynamic) |
| (4)------------------------+ |
| | optee dispatcher driver | |
+-----------------+-------^---------|-------+------------------+
M-mode | | |
---------+--[trusted domain]---+----.----+--[untrusted domain]-------
S-mode | (coldboot domain) | | |
v | | v
(3)---------------------------+ |(5)----------------------------+
| OP-TEE OS | | | U-Boot |
+----------------------------+ | +-----------------------------+
| |
| v
|(6)----------------------------+
| | Linux |
| +-----------------------------+
As OP-TEE OS has device-tree node fixups that need to be passed
through to the next boot stages, e.g. the reserved memory node:
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
optee_core@f1000000 {
no-map;
reg = <0x0 0xf1000000 // OP-TEE OS base address
0x0 0x01000000>;
};
<...>
};
Instead of using 0x0 as the default value, allow identical next-arg1
to be used by non-coldboot domain (i.e., untrusted domain) when the
property is not provided.
Also, update the description of next-arg1 property in the document.
Signed-off-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Alvin Chang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
A new property has been added, with an extensive rationale at [1], that
can be used in place of "riscv,isa" to indicate what extensions are
supported by a given platform that is a list of strings rather than a
single string. There are some differences between the new property,
"riscv,isa-extensions" and the incumbent "riscv,isa" - chief among them
for the sake of parsing being the list of strings, as opposed to a
string. Another advantage is strictly defined meanings for each string
in a dt-binding, rather than deriving meaning from RVI standards. This
may likely to some divergence over time, but, at least for now, there's
no relevant differences between the two for an M-Mode program.
Add support for the new property in OpenSBI, prioritising it, before
falling back to the, now deprecated, "riscv,isa" property if it is not
present.
Link: https://lore.kernel.org/all/20230702-eats-scorebook-c951f170d29f@spud/ [1]
Signed-off-by: Conor Dooley <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
We would like to clean any files generated by the carray
scripts by just searching for the filename as the current
make system turns f.carray into f.o. Change to make the
make system turn f.carray into f.carray.o
note, command to go through .mk files changing the .o
in the .mk files is:
find . -type f -name "*.carray" | xargs -t -I fname /bin/bash -x -c ' fn=`basename -s .carray fname`; echo "$fn"; sed -i `dirname fname `/objects.mk -e s/"$fn".o/"$fn".carray.o/g'
Link: https://patchwork.ozlabs.org/project/opensbi/patch/[email protected]/
Reported-by: Ivan Orlov <[email protected]>
Suggested-by: Andrew Jones <[email protected]>
Signed-off-by: Ben Dooks <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
When used to read characters from the terminal (e.g., when the SBI
console is used via ecall from linux with `console=hvc0`), we must
acknowledge receipt of each character to "pop" it off the LiteUART
hardware queue, and allow the next character to be made available.
Fixes: 52af6e4b ("lib: utils: Add LiteX UART support")
Suggested-by: Dolu1990 <[email protected]>
Signed-off-by: Gabriel Somlo <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
In DT, multiple reset devices may use the same driver, and they
may have different priorities. If rc is returned after the first
initialization, the highest priority device may be lost.
Fixes: a73ff043e991 (lib: utils/reset: Fix fdt_reset to search for more dt nodes)
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
If there are multiple dt nodes, the previous code only tries to match
the first one, which may lose initialization.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
When the dt node has a status property and the value is not ok or
okay, skip initializing reset.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
If there are multiple dt nodes, the previous code only tries to match
the first one, which may lose initialization.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
When the dt node has a status property and the value is not ok or
okay, skip initializing serial.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
When the dt node has a status property and the value is not ok or
okay, skip initializing irqchip.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
When the dt node has a status property and the value is not ok or
okay, skip initializing timer.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
When the dt node has a status property and the value is not ok or
okay, skip initializing ipi.
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
During Linux AIA driver review, the APLIC DT property for interrupt
delegation was renamed to "riscv,delegation" so let's use the new DT
property name and fallback to old DT property name if the new DT
property name is not available.
Fixes: 34612193af92 ("lib: utils/irqchip: Add FDT based driver for APLIC")
Signed-off-by: Anup Patel <[email protected]>
|
|
"gpio-poweroff" and "gpio-restart" always set gpio to high to
active the function, but some chips need a low signal to active.
Fortunately, it can be achieved by setting GPIO_FLAG_ACTIVE_LOW
for the gpio. Implement this flag support for the gpio library
so the gpio reset can function well.
Signed-off-by: Inochi Amaoto <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
imsic_get_target_file()
Add extra sanity checks to prevent the caller getting the invalid result from
imsic_get_data() or imsic_get_target_file() when imsic is not initialized
correctly.
Signed-off-by: Cyan Yang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The current mlevel imsic check is only for the platform, which
may cause hart without imsic in the platform to trigger an
illegal instruction exception when initializing imsic. For
example, the platform contains a management hart that only
supports wired interrupts.
This patch will check if each hart supports Smaia extension
before doing imsic initialization to avoid triggering illegal
instruction exceptions.
Signed-off-by: Cheng Yang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
SG2042 uses an onboard MCU to provide reset function.
Add reset driver to support this onboard MCU.
Signed-off-by: Inochi Amaoto <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
After calling fdt_node_offset_by_compatible() we must check its return
value and not an unrelated value.
Addresses-Coverity-ID: 1584993 Logically dead code
Fixes: 67ce5a763cfb ("platform: generic: Add support for specify coldboot harts in DT")
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The address of the local scratch area is stored in each hart's mscratch
CSR. It is more efficient to read the CSR than to compute the address
from the hart ID.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The irqchip handlers will typically not need pointer to trap registers
so remove regs parameter of sbi_irqchip_process().
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Tested-by: Samuel Holland <[email protected]>
Reviewed-by: Clément Léger <[email protected]>
|
|
Added support for the generic platform to specify the set of coldboot
hart in DT. If not specified in DT, all harts are allowed to coldboot
as before.
The functions related to sbi_hartmask are not available before coldboot,
so I used bitmap, and added a new bitmap_test() function to test whether
a certain bit of the bitmap is set.
Signed-off-by: Cheng Yang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The parser will fail if the timer is clint timer and has regname
property. As the regname is only meaningful for aclint, it is more
robust to only check regname for aclint timer.
Fixes: 6112d58 ("lib: utils/fdt: Allow to use reg-names when parsing ACLINT")
Signed-off-by: Inochi Amaoto <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
