| Age | Commit message (Collapse) | Author |
|---|
|
The MPXY framework currently stores registered channels in a global
list and exposes them to all callers. However, the intended model is
that each channel is assigned to a single supervisor domain at boot and
remains owned by that domain for its lifetime.
Introduce fixed owner-domain tracking in struct sbi_mpxy_channel and
make channel lookup and enumeration domain-aware. A channel is now
visible only when accessed from its owning domain. Also require the
owner to be set before channel registration.
This allows MPXY to support systems where the same hart may be reused by
multiple domains while keeping channel ownership and visibility fixed to
the domain that owns the service.
Signed-off-by: Oza Pawandeep <[email protected]>
Reviewed-by: Rahul Pathak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add an irq_state field to struct sbi_irqchip_hwirq_data with a single
IRQ_ENABLED flag (bit 0) to track whether a hardware interrupt has been
enabled via the irqchip framework. Set IRQ_ENABLED in
sbi_irqchip_unmask_hwirq() when the unmask callback is invoked.
Add sbi_irqchip_get_irq_state() as a private inline accessor and expose
sbi_irqchip_is_irq_enabled() as a public API for drivers to query the
enabled state of a hardware interrupt by chip pointer and hwirq number.
Refactor imsic_local_eix_update() to operate on a single interrupt ID
instead of a base+count range, simplifying the CSR bit manipulation to
a direct BIT(id) write without the inner loop. Update all call sites
accordingly.
Use sbi_irqchip_is_irq_enabled() in imsic_warm_irqchip_init() to
restore per-EIID EIE CSR state on warm boot and HSM resume based on
the saved irq_state, replacing the previous blanket disable of all
interrupts. This ensures that EIIDs enabled during hotplug/warminit
cycle are correctly re-enabled on the resuming hart without requiring
software to re-register or re-unmask each interrupt.
Signed-off-by: Oza Pawandeep <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Rewrite imsic_process_hwirqs() to use container_of() for instance
lookup, validate ownership via imsic_current_hart_owner(), mask
IMSIC_TOPEI_ID_MASK on the raw CSR value, and dispatch non-IPI EIIDs
through sbi_irqchip_process_hwirq() instead of an open-coded switch.
Rewrite imsic_warm_irqchip_init() to resolve the imsic_data instance
via container_of() from the sbi_irqchip_device pointer, and skip
initialization silently for harts not owned by this instance.
Extend the sbi_irqchip callback set:
- hwirq_setup: registers sbi_irqchip_raw_handler_default for the EIID
- hwirq_cleanup: clears EIE and EIP bits for the EIID on the owner hart
- hwirq_eoi: no-op as claim/ack is already performed by CSR_MTOPEI
read in imsic_process_hwirqs()
- hwirq_set_affinity: reprograms the upstream MSI source via
imsic_program_msi() to retarget the interrupt to the new hart
- hwirq_mask: clears the EIE bit for the EIID on the owner hart
- hwirq_unmask: sets the EIE bit for the EIID on the owner hart,
skipping IPI (EIID 1) and non-owner harts
Add imsic_compose_msi_msg() to compute the MMIO target address for a
given hart and EIID by walking the imsic_regs array and applying file
and guest index offsets.
Add imsic_program_msi() that composes an MSI message
and delivers it to the upstream interrupt source via
sbi_irqchip_write_msi(), enabling APLIC TARGET register programming
from the IMSIC driver.
Migrate imsic_cold_irqchip_init() to the instance-based model:
preserve any pre-configured target_harts mask set by platform or FDT
code before applying the imsic_device template, falling back to
sbi_hartmask_set_all() only when no mask was provided. Register the
irqchip and reserved EIIDs on the embedded irqchip rather than the
global singleton.
Signed-off-by: Oza Pawandeep <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Embed sbi_irqchip_device in struct imsic_data to enable instance-based
irqchip registration, replacing the previous global imsic_device
singleton. Include sbi_irqchip.h from imsic.h to make the embedded
struct visible to consumers.
Signed-off-by: Oza Pawandeep <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add parent_unique_id fields to struct aplic_data for
IMSIC parent linking in MSI mode. Store parent IMSIC unique_id
during FDT parsing of the APLIC node.
Add aplic_is_msi_mode() complementing aplic_is_direct_mode() to
consolidate delivery mode detection. Add APLIC_TARGET_EIID() macro
for packing the EIID field into the TARGET register.
Add parent_unique_id and parent_irq_map fields to struct aplic_data.
parent_unique_id identifies the upstream IMSIC irqchip device resolved
via sbi_irqchip_find_device() during hwirq_setup. parent_irq_map is
a per-source array allocated at cold init time to track the EIID
assigned by the IMSIC for each APLIC source.
Restore aplic_writel_msicfg() and re-introduce MSI address register
programming in aplic_init(), gated on aplic_is_msi_mode(). Set the
DOMAINCFG_DM bit to switch the hardware to MSI delivery mode when
no IDC structures are present.
Add aplic_program_msi_target() to pack hart_index, guest_index, and
EIID into the APLIC_TARGET register. Add aplic_write_msi() as the
sbi_irqchip write_msi callback that extracts EIID and hart_index from
the MSI message and calls aplic_program_msi_target(). Add
aplic_msi_callback() as the MSI receive callback that dispatches to
sbi_irqchip_process_hwirq() on the APLIC chip.
Extend aplic_hwirq_setup() with an MSI path that resolves the parent
IMSIC chip by parent_unique_id, registers an MSI route via
sbi_irqchip_register_msi(), and stores the allocated EIID in
parent_irq_map for the source being configured.
Extend aplic_hwirq_set_affinity() with an MSI path that delegates
affinity reprogramming to the parent IMSIC chip via
sbi_irqchip_set_affinity() using the stored parent_irq_map entry.
Guard warm_init, process_hwirqs, and hwirq_eoi with early returns in
MSI mode as interrupt delivery and acknowledgement are handled by the
IMSIC in that configuration.
Signed-off-by: Oza Pawandeep <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add inline register accessors (aplic_sourcecfg_write/read,
aplic_target_write, aplic_irq_setie/clrie/clrip, aplic_idc_base/
read/write) to consolidate all MMIO access behind typed helpers
and eliminate open-coded address arithmetic throughout the driver.
Add field-packing macros APLIC_TARGET_HART_IDX, APLIC_TARGET_IPRIO,
and APLIC_TARGET_GUEST_IDX for constructing
APLIC_TARGET register values.
Add aplic_is_direct_mode() mode helper, aplic_hwirq_flags_to_sourcecfg()
to map generic hwirq flags to APLIC source modes, aplic_hwirq_is_delegated()
to detect S-mode delegated sources, aplic_find_idc_index() to map a
hart index to its IDC slot, and aplic_first_target_hart() to select
the first available IDC hart for initial interrupt targeting.
Implement the full sbi_irqchip callback set for direct (IDC) mode:
- warm_init: enables IDC interrupt delivery and threshold per hart
- process_hwirqs: reads TOPI and dispatches via sbi_irqchip_process_hwirq,
skipping delegated sources
- hwirq_setup: programs sourcecfg from hwirq_flags and sets the TARGET
register to the first available IDC hart
- hwirq_cleanup: clears IE, IP, sourcecfg, and TARGET on teardown
- hwirq_eoi: reads CLAIMI to acknowledge the interrupt on the IDC
- hwirq_set_affinity: reprograms TARGET to the specified hart index
- hwirq_mask/unmask: clears/sets IE via CLRIENUM/SETIENUM
Register the irqchip device and populate target_harts from idc_map
only when targets_mmode is set in aplic_cold_irqchip_init().
Co-developed-by: Raymond Mao <[email protected]>
Signed-off-by Raymond Mao <[email protected]>
Signed-off-by: Oza Pawandeep <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add RPMI MPXY proxy driver for LOGGING service group so that
S-mode can leverage LOGGING service group implemented by the
platform microcontroller.
Reviewed-by: Rahul Pathak <[email protected]>
Signed-off-by: Subrahmanya Lingappa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Litex SoC controller supports reboot function by toggling the first
bit of the ctrl register. Add a reset driver so other software can
use it.
Signed-off-by: Inochi Amaoto <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Instead of parsing ISA extensions separately for each hart in the
generic_extensions_init() function, it is better to parse ISA extensions
for all available harts in the cold boot path. Also, this allows us
to remove fdt_isa_bitmap from scratch space and directly initialize
"extensions" in struct sbi_hart_features for each hart.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Extend struct sbi_irqchip_device to allow irqchip drivers advertise
interrupt controller capabilities (such as wired interrupt, MSIs, etc).
This further allows other parts of OpenSBI to lookup irqchip devices
based on capabilities.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Some drivers inherited FDT match data from the GPIO/syscon reset
drivers, but do not use it for anything. Remove it to avoid confusion.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Introduce root-regions-inheritance DT property to control
copying of root domain memregions. Support 'all' and 'm-only'
modes, always inheriting firmware and M-only regions; behavior
matches m-only policy when property is absent.
Signed-off-by: Yu-Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Some of the hardware interrupts may be special so allow irqchip
drivers to make these hardware interrupts as reserved. Introduce
sbi_irqchip_register_reserved() for this purpose.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The interrupt client should be allowed to specify the line sensing
type of the hwirqs for which it is registering handler. To support
this, add hwirq_flags parameter to hwirq_setup() callback provided
by the irqchip driver.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The SpacemiT P1 is a PMIC commonly found with SpacemiT CPU like K1. Add
a reset driver for it.
Signed-off-by: Aurelien Jarno <[email protected]>
Tested-by: Anand Moon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add a simple SpacemiT I2C driver for basic byte transfers over the I2C
bus, prioritizing simplicity over performance. The driver operates in
PIO mode and does not use interrupts, FIFO, or DMA.
The controller is reset at the start of each transaction to ensure a
known initial state, regardless of prior configuration by the kernel.
This also avoids the need for additional error recovery code.
This will be used for communication with onboard PMIC to reset and
power-off the board.
Signed-off-by: Aurelien Jarno <[email protected]>
Tested-by: Anand Moon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The reg_stride field represents the address stride in bytes between
consecutive registers. The Linux kernel regmap framework validates
register accesses using IS_ALIGNED(reg, map->reg_stride) as an address
alignment check (drivers/base/regmap/regmap.c). The Linux kernel syscon
driver (drivers/mfd/syscon.c) sets reg_stride directly to reg_io_width:
syscon_config.reg_stride = reg_io_width;
The current OpenSBI code incorrectly multiplies reg_io_width by 8,
converting a byte value to bits. Fix this by using reg_io_width directly
as the stride value, consistent with the Linux kernel.
Fixes: f21d8f7d5911 ("lib: utils/regmap: Add simple FDT based syscon regmap driver")
Signed-off-by: David E. Garcia Porras <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
When "boot-hart" is not specified, dom->boot_hartid was left as -1U,
causing domain context switching to fail. Default it to the coldboot
HART to enable SMP boot in multi-domain setups, consistent with how
next-arg1 is handled.
Also update its description in domain_support.md.
Signed-off-by: Yu-Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The following compile error is seen with LLVM compiler:
CC platform/generic/lib/utils/mpxy/fdt_mpxy_rpmi_mm.o
lib/utils/mpxy/fdt_mpxy_rpmi_mm.c:17:6: error: use of GNU 'missing =' extension in
designator [-Werror,-Wgnu-designator]
17 | [0] {
| ^
| =
lib/utils/mpxy/fdt_mpxy_rpmi_mm.c:24:6: error: use of GNU 'missing =' extension in
designator [-Werror,-Wgnu-designator]
24 | [1] {
| ^
| =
2 errors generated.
Add missing "=" in mm_srvcdata[] array initialization to address
the above issue.
Fixes: 0b041e58c078 ("lib: utils: Add MPXY client driver for RPMI MM service group")
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Ranbir Singh <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add necessary infra for implementing RPMI Management Mode
service group on platform microcontroller.
Co-authored-by: Sunil V L <[email protected]>
Signed-off-by: Ranbir Singh <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
To handle external interrupts in M-mode, the sbi_irqchip framework
must allow registering interrupt handlers from device drivers.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Allow locating irqchip device instance using a unique 32-bit ID. This
32-bit unique ID can be set by the irqchip driver at the time of adding
irqchip device.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add a 32-bit unique ID to plic, aplic, and imsic data which can be
used to differentiate multiple irqchip devices.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
It is possible to have platform where an irqchip device targets
a subset of harts and there are multiple irqchip devices to cover
all harts.
To support this scenario:
1) Add target_harts hartmask to struct sbi_irqchip_device which
represents the set of harts targetted by the irqchip device
2) Call warm_init() and process_hwirqs() callbacks of an irqchip
device on a hart only if irqchip device targets that particular
hart
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
A platform can have multiple APLICs in direct-mode targetting
different subset of harts. Add APLIC ID to hartindex map in
struct aplic_data to capture the set of harts targeted by a
given APLIC in direct-mode.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The context_map[][] elements should be initialized with negative
value so that context_map does not point to anything for non-existent
PLIC contexts.
Fixes: 69448a079065 ("lib: utils/irqchip: plic: Provide a hartindex to context map")
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The irq_handle() callback of irqchip device is meant to process
hardware interrupt of the irqchip hence rename it accordingly.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The check for the address being different from 0 for the UART, PLIC,
APLIC and IMSIC dt nodes is unnnecessary and could skip valid nodes.
Signed-off-by: Victoriano Morales <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Altera provides a JTAG UART core that provides virtual UART over JTAG
and can coexist with their virtual JTAG. [1] This core has already been
supported by Linux and the programming interface has always been stable.
Add support for it to OpenSBI to ease JTAG prototype bringing up.
The driver follows the device tree binding in mainline Linux. [2]
[1] https://docs.altera.com/r/docs/683130/25.3/embedded-peripherals-ip-user-guide/jtag-uart-core
[2] https://github.com/torvalds/linux/blob/v6.19-rc1/Documentation/devicetree/bindings/serial/altr%2Cjuart-1.0.yaml
Signed-off-by: Icenowy Zheng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Implement a system-wide suspend driver for the Andes AE350 platform.
This driver supports Andes-specific deep sleep (suspend to RAM) and
light sleep (suspend to standby) functionalities via the ATCSMU.
The major differences between deep sleep and light sleep are:
- Power Domain and Resume Path: Deep sleep powers down the core domain.
Consequently, harts waking from deep sleep resume from the reset
vector. Light sleep utilizes clock gating to the core domain; harts
maintain state and resume execution at the instruction immediately
following the WFI instruction.
- Primary Hart Wakeup: In both modes, the primary hart is woken by
UART or RTC alarm interrupts. In deep sleep, the primary hart is
additionally responsible for re-enabling the Last Level Cache (LLC)
and restoring Andes-specific CSRs.
- Secondary Hart Wakeup: In light sleep, secondary harts are woken
by an IPI sent from the primary hart. In deep sleep, they are
woken by an ATCSMU hardware wake-up command. Furthermore,
secondary harts must restore Andes-specific CSRs when returning
from deep sleep.
Signed-off-by: Ben Zong-You Xie <[email protected]>
Signed-off-by: Leo Yu-Chi Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Introduce a FDT-based driver for the Andes Last Level Cache (LLC)
controller to support cache maintenance operations.
Signed-off-by: Ben Zong-You Xie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add functions to enable/disable the cache.
Signed-off-by: Ben Zong-You Xie <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Implement a save and restore mechanism for Andes-specific CSRs to support
hardware power-saving modes, such as CPU hotplug or suspend to RAM.
Signed-off-by: Ben Zong-You Xie <[email protected]>
Signed-off-by: Leo Yu-Chi Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Refactor ATCSMU (System Management Unit) support by moving it from a
system utility into a dedicated FDT-based HSM driver.
Key changes include:
- Moving the functions in lib/utils/sys/atcsmu.c into the new HSM driver
- Moving hart start and stop operations on AE350 platform into the new
HSM driver
- Converting the assembly-based functions in sleep.S to C code for the
readability
- Updating the ATCWDT200 driver
Signed-off-by: Ben Zong-You Xie <[email protected]>
Signed-off-by: Leo Yu-Chi Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Previously we assume only 1 UART8250 instance can be used. Now we support
multiple instances by introducing counterpart functions to putc/getc/init
which take an extra *dev parameter, and name them as uart8250_device_xyz()
The original functions without the *dev parameter will operate on the
default instance exactly the same as before, so no changes on the caller
is required.
Note: uart8250_device_init only does device initialization without the
console registration logic.
Signed-off-by: Bo Gan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Drivers or platforms may create memory regions with the MMIO flag set
that contain S-mode-accessible MMIO devices. This is strictly correct
and should be allowed, along with the existing default case of
S-mode-accessible MMIO devices appearing in non-MMIO memory regions.
When passed SBI_DOMAIN_MMIO, sbi_domain_check_addr() will perform the
correct set of permission checks.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Yu-Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add support for SiFive Extensible Cache (EC) controller with multi-slice
architecture. The driver implements cache maintenance operations through
MMIO register interface.
Co-developed-by: Vincent Chen <[email protected]>
Signed-off-by: Vincent Chen <[email protected]>
Co-developed-by: Samuel Holland <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
Co-developed-by: Yong-Xuan Wang <[email protected]>
Signed-off-by: Yong-Xuan Wang <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
SiFive Private L2(PL2) cache is a private cache owned by each hart. Add
this driver to support private cache flush operations via the MMIO
registers.
Co-developed-by: Eric Lin <[email protected]>
Signed-off-by: Eric Lin <[email protected]>
Co-developed-by: Zong Li <[email protected]>
Signed-off-by: Zong Li <[email protected]>
Co-developed-by: Vincent Chen <[email protected]>
Signed-off-by: Vincent Chen <[email protected]>
Co-developed-by: Samuel Holland <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The fdt_cache_add() helper attempts to retrieve the next-level cache and
returns SBI_ENOENT when there is none. Since this condition only indicates
that the current cache is the last-level cache, the helper should not
treat it as an error.
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Array context_id in struct plic_data has elements of type s16.
A negative valid indicates an invalid entry.
Copying the array element to a u32 scalar hides the sign.
Use s16 as target type when copying an array element to a scalar.
Addresses-Coverity-ID: 1667176 Unsigned compared against 0
Addresses-Coverity-ID: 1667178 Logically dead code
Addresses-Coverity-ID: 1667179 Unsigned compared against 0
Addresses-Coverity-ID: 1667182 Logically dead code
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
%s/Recieve/Receive/
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The MTIMER of the MIPS P8700 is compliant with the ACLINT specification,
so add a compatible string for it.
Signed-off-by: Benoît Monin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The current selection of the reference MTIMER may fail in some setup.
In a multi-cluster configuration, there is one MTIMER per cluster, each
associated with the HARTS of the cluster. So we do not have a MTIMER
with no associated HARTs to use as our reference.
To be able to select a reference MTIMER in that case, look up an optional
device tree property named "riscv,reference-mtimer" that indicate which
MTIMER is the reference.
Signed-off-by: Benoît Monin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The MSWI present in the MIPS P8700 is compliant with the ACLINT
specification, so add a dedicated compatible string for it.
Signed-off-by: Benoît Monin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add MPXY RPMI mailbox driver for performance.
Signed-off-by: Joshua Yeong <[email protected]>
Reviewed-by: Rahul Pathak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add MPXY RPMI mailbox driver for device power.
Signed-off-by: Joshua Yeong <[email protected]>
Reviewed-by: Rahul Pathak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add voltage service group for RPMI/MPXY support
Signed-off-by: Joshua Yeong <[email protected]>
Reviewed-by: Rahul Pathak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The SiFive SMC0 controls the clock and power domain of the core complex
on the SiFive platform. The core complex enters the low power state
after the secondary cores enter the tile power gating and last core
execute the `CEASE` instruction with the corresponding SMC0
configurations. The devices that inside both tile power domain and core
complex power domain will be off, including caches and timer. Therefore
we need to flush the last level cache before entering the core complex
power gating and update the timer after waking up.
Reviewed-by: Cyan Yang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Exposing the ACLINT timer update APIs so the user can update the mtimer
after waking up from the non-retentive suspend.
Reviewed-by: Cyan Yang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The SiFive TMC0 controls the tile power domains on SiFive platform. The
CPU enters the low power state via the `CEASE` instruction after
configuring the TMC0. Any devices that inside the tile power domain will
be power gated, including the private cache. Therefore flushing the
private cache before entering the low power state.
Co-developed-by: Vincent Chen <[email protected]>
Signed-off-by: Vincent Chen <[email protected]>
Reviewed-by: Cyan Yang <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
