| Age | Commit message (Collapse) | Author |
|---|
|
We update gpio drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate gpio
drivers for each platform.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
We update i2c drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate i2c
drivers for each platform.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
We update irqchip drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate irqchip
drivers for each platform.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
We update ipi drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate ipi
drivers for each platform.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
We update timer drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate timer
drivers for each platform.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
We update system drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate system
drivers for each platform.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
We update reset drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate reset
drivers for each platform.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
We update serial drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate serial
drivers for each platform.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
We extend the top-level makefile to allow kconfig based configuration
for each platform where each platform has it's own set of configs with
"defconfig" being the default config.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
RISC-V doesn't generate exceptions on divide-by-zero, but the result,
all bits set, is not likely what people expect either. In all cases
where we divide by baudrate there's a chance it's zero (when the DT
it came from is "bad"). To avoid difficult to debug situations, leave
baudrate dependent registers alone when baudrate is zero, as, also in
all cases, it appears we can skip initialization of those registers
and still [hopefully] have a functioning UART.
Signed-off-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Signed-off-by: Andrew Jones <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
While it doesn't look like there are any current cases of using
uninitialized data, let's zero all the UART data members to be
safe. Zero may not actually be better than a random number in
some cases, so all structure members should still be validated
before use, but at least zero is usually easier to debug than
some random stack garbage...
Signed-off-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Factor out the common code used by the fdt UART node parsers,
allowing us to drop duplicate code.
Signed-off-by: Andrew Jones <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The age old version of Shakti UART was upgraded long back, but we missed
updating the driver in OpenSBI. The old version of UART is not supported
anymore, hence removed the inline comment which is also outdated now.
Signed-off-by: Prasanna T <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Xiang W <[email protected]>
|
|
The allwinner,sun20i-d1-clint compatible string is not documented in any
official binding, so it should not be used by drivers.
The MSWI in the D1 CLINT is compatible with the ACLINT specification, so
it can take advantage of generic driver support. However, that is only
possible if the MSWI and MTIMER are split into separate DT nodes. This
means the final binding for this device is likely to be incompatible
with what is implemented here.
Remove this compatible string from the driver to prevent it from
appearing in a stable version and causing future issues.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The second invocation of plic_context_init() incorrectly calls the
function with m_cntx_id instead of s_cntx_id. This breaks systems which
only have 1 external interrupt per hart.
Fixes: 8c362e7 ("lib: irqchip/plic: Factor out a context init function")
Signed-off-by: Jan Remes <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
The CLINT in the Allwinner D1 SoC apparently does not support 64-bit
MMIO access. A property was added to support this quirk (and that
property was copied to the ACLINT MTIMER code). However, since this
difference in behavior makes the D1 CLINT incompatible with the SiFive
CLINT's programming interface, a better solution is to use a separate
compatible string.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Based on architecture review committee feedback, the [m|s|vs]seteienum,
[m|s|vs]clreienum, [m|s|vs]seteipnum, and [m|s|vs]clreipnum CSRs are
removed in the latest AIA draft v0.3.0 specification.
(Refer, https://github.com/riscv/riscv-aia/releases/tag/0.3.0-draft.31)
These CSRs were mostly for software convenience and software can always
use [m|s|vs]iselect and [m|s|vs]ireg CSRs to update the IMSIC interrupt
file bits.
We update the IMSIC programming as-per above to match the latest AIA
draft specification.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
The delegation bit is lost along with the rest of the PLIC state when
the CPU power domain in the Allwinner D1 is powered down, so the PLIC
needs to be re-delegated to S-mode during the hart resume path.
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
|
|
These functions save/restore the state of the PLIC associated with the
current hart. The context save/restore functions only manipulate a
single context, since most likely the M-mode context is unused and does
not need to be saved.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
These can be used by platform code to save the PLIC priority state, if
it would otherwise be lost during non-retentive suspend. The platform
is responsible for allocating all necessary storage.
As a space optimization, store the saved priority values as 8-bit
integers, since that is large enough to hold any priority value on the
relevant platforms.
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
|
|
These can be used by platform code to save the PLIC context state, if
it would otherwise be lost during non-retentive suspend. The platform
is responsible for allocating all necessary storage.
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
|
|
This simplifies both the callers and the callees by removing duplicated
code and consolidating the error handling. It also fixes two bugs in the
process:
1) ie_words was one too large when plic->num_src was a multiple of 32.
2) plic_set_ie takes a 32-bit mask, not a Boolean value, so the FPGA
platforms previously only enabled one out of every 32 interrupts.
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
|
|
None of the functions modify the passed-in plic_data, so mark it const.
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
|
|
Match data stores hardware attributes which do not change at runtime, so
it does not need to be mutable. Make it const.
Reviewed-by: Guo Ren <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
|
|
The function returns the highest hart-id of the harts actually used in
the system (enabled). Change the name to reflect this fact.
Signed-off-by: Jan Remes <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Ignore CPU nodes in FDT that are not enabled.
Signed-off-by: Jan Remes <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
If an FDT node contains a "status" property and this property is not
"ok" or "okay", this node should be ignored. Introduce a function that
checks this.
Signed-off-by: Jan Remes <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Fix typo in irqchip_imsic_update_hartid_table() when checking for CPU
node.
Signed-off-by: Jan Remes <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
Instead of having FDT gpio driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Instead of having FDT i2c adapter driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Instead of having FDT ipi driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Instead of having FDT irqchip driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Instead of having FDT timer driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Instead of having FDT serial driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Instead of having FDT reset driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Since past few years, we have been using "hart features" in OpenSBI
to represent all optionalities and multi-letter extensions defined
by the RISC-V specifications.
The RISC-V profiles specification has taken a different approach and
started assigning extension names for all optionalities which did not
have any extension name previously.
(Refer, https://github.com/riscv/riscv-profiles/blob/main/profiles.adoc)
Inspired from the RISC-V profiles specification, we convert OpenSBI
hart features into hart extensions. Going forward, we align the
extension naming with RISC-V profiles specification. Currently, only
"time CSR" and "AIA CSR" have not been assigned extension name but
for everything else we have a name.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
reg-offset property is used for offset to apply to the mapbase
from the start of the registers in 8250 UART. In Linux kernel,
it has been handled in 8250 UART driver.
dt-bindings:
<linux>/Documentation/devicetree/bindings/serial/8250.yaml
Signed-off-by: Zong Li <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Initial commit of the xlnx-uartlite device and FDT support. This was
tested by running OpenSBI on a modified QEMU virt machine using the
xlnx-uartlite for serial.
Signed-off-by: Alistair Francis <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Currently, the external interrupt handling is scattered between
sbi_init and sbi_trap. This patch moves all external interrupt
handling into a simple framework called sbi_irqchip.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We should disable APLIC DT nodes in fdt_fixups() which are not
accessible to the next booting stage based on currently assigned
domain.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add simple FDT irqchip driver for APLIC so that generic platform (and
other FDT based platforms) can utilize common APLIC initialization library.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add simple APLIC initialization library which is independent of
hardware description format (FDT or ACPI). This APLIC initialization
library can be used by custom OpenSBI platform support to setup
APLIC domains.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We should disable IMSIC DT nodes in fdt_fixups() which are not
accessible to the next booting stage based on currently assigned
domain.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add simple FDT irqchip driver for IMSIC so that generic platform
(and other FDT based platforms) can utilize common IMIC library.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We add simple IMSIC library which is independent of hardware description
format (FDT or ACPI). This IMSIC library can be used by custom OpenSBI
platform support to setup IMSIC for external interrupts.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
We can have multiple FDT irqchip drivers to be probed when a RISC-V
system has different types of interrupt controller in a hierarchy.
This will be certainly the case when a RISC-V system has both
RISC-V AIA IMSIC and RISC-V AIA APLIC implemented.
We extend simple FDT irqchip framework to allow multiple FDT
irqchip drivers to be used for same RISC-V platform.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Previously, it was rounded down and that gives suboptimal results when
non-standard clock sources or baud rates are used.
Signed-off-by: Jakub Luzny <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
In a systems that provide strings.h and it is included
together with sbi_bitops.h the compilation error appears.
The ffs() and fls() are provided by strings.h
Signed-off-by: Petro Karashchenko <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Using "void *" in arithmetic causes errors with strict compiler settings:
"error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]"
Avoid these by calculating on "char *" where 1-byte data size is assumed.
Signed-off-by: Jukka Laitinen <[email protected]>
Reviewed-by: Dong Du <[email protected]>
Reviewed-by: Xiang W <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
