| Age | Commit message (Collapse) | Author |
|---|
|
Since the APLIC may enter a reset state upon system wake-up from a
platform low power state, adding a restore function to reinitialize
the APLIC.
Reviewed-by: Yong-Xuan Wang <[email protected]>
Reviewed-by: Cyan Yang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add the helpers to build up the cache hierarchy via FDT and provide some
cmo functions for the user who want to flush the entire cache.
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
SiFive Composable cache is a L3 share cache of the core complex. Add this
driver to support the share cache maintenance operations via the MMIO
registers.
Co-developed-by: Samuel Holland <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
Signed-off-by: Vincent Chen <[email protected]>
Co-developed-by: Nick Hu <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add the FDT cache library so we can build up the cache topology via the
'next-level-cache' DT property.
Co-developed-by: Vincent Chen <[email protected]>
Signed-off-by: Vincent Chen <[email protected]>
Co-developed-by: Andy Chiu <[email protected]>
Signed-off-by: Andy Chiu <[email protected]>
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The current RISC-V CMO only defines how to flush a cache block. However,
certain use cases, such as power management, may require flushing the
entire cache. Therefore, a framework is being introduced to allow vendors
to flush the entire cache using their own methods.
Signed-off-by: Nick Hu <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The SiFive CLINT v2 is the HRT that supports the Zicntr extension. It
is incompatible with the SiFive CLINT v0 due to differences in their
control methods.
Signed-off-by: Vincent Chen <[email protected]>
Signed-off-by: Yong-Xuan Wang <[email protected]>
Co-developed-by: Yong-Xuan Wang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add code to bring up all 8 cores during OpenSBI initialization so
that the Linux kernel can detect and use all cores properly.
Co-authored-by: Troy Mitchell <[email protected]>
Signed-off-by: Troy Mitchell <[email protected]>
Signed-off-by: Xianbin Zhu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Add shared memory region so the driver has permission
to access it in OpenSBI.
Signed-off-by: Yu-Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The section 4.5.4 "Supervisor MSI address configuration (smsiaddrcfg
and smsiaddrcfgh)" of the AIA specification states that:
"If register mmsiaddrcfgh of the domain has bit L set to one, then
smsiaddrcfg and smsiaddrcfgh are locked as read-only alongside
mmsiaddrcfg and mmsiaddrcfgh."
In other words, the L bit is not defined for smsiaddrcfg[h] registers
so fix aplic_writel_msicfg() accordingly.
Signed-off-by: Yang Jialong <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The fdt_ipi_init() is already called from generic_early_init() so
let's convert IPI drivers as early drivers.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Tested-by: Nick Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
A platform can have multiple IPI devices (such as ACLINT MSWI,
AIA IMSIC, etc). Currently, OpenSBI rely on platform calling
the sbi_ipi_set_device() function in correct order and prefer
the first avaiable IPI device which is fragile.
Instead of the above, introduce IPI device rating and prefer
the highest rated IPI device. This further allows extending
the sbi_ipi_raw_clear() to clear all available IPI devices.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Nick Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
RPMI system reset is a posted message which
does not wait for acknowledgement after sending
the RPMI message to PuC. Call the sbi_hart_hang()
to hang the hart after performing the system reset
via RPMI message.
Fixes: 6a26726e08e4 ("lib/utils: reset: Add RPMI System Reset driver")
Reported-by: Anup Patel <[email protected]>
Signed-off-by: Rahul Pathak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
According to the Device Tree Spec, Chapter 2.3.8 "ranges" [1]:
The parent address size will be determined from the #address-cells
property of the node that defines the parent’s address space.
In fdt_translate_address(), which considered the parent address size
is the child address size, this commit fix the two address sizes
and parsing the address independently.
Signed-off-by: Max Hsu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
On some platforms, read RBR when it is empty may result in an error.
Signed-off-by: Yi Pei <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/CAFPVDjQZ1gpf8-u--RBbAL1Y0FfDN2vZ3g=wBw+Bp-8ppuz3HA@mail.gmail.com
Signed-off-by: Anup Patel <[email protected]>
|
|
As RPMI v1.0 specification is frozen, disable the
experimental tag for such RPMI drivers.
Signed-off-by: Rahul Pathak <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The latest frozen RPMI spec has added Implementation ID
and Implementation Version as message protocol specific
mpxy attributes. Add support for these.
Signed-off-by: Rahul Pathak <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Currently, the fdt_parse_aclint_node() does not handle non-contiguous
hartid correctly and returns incorrect first_hartid and hart_count.
This is because the for-loop in fdt_parse_aclint_node() skips a hartid
for which hartindex is not available (aka corresponding CPU DT node
is disabled).
For example, on a platform with 4 HARTs (hartid 0, 1, 2, and 3) where
CPU DT nodes with hartid 0 and 2 are disabled, the fdt_parse_aclint_node()
returns first_hartid = 1 and hart_count = 3 which is incorrect.
To address the above issue, drop the sbi_hartid_to_hartindex() check
from the for-loop of fdt_parse_aclint_node().
Fixes: 5e90e54a1a53 ("lib: utils:Check that hartid is valid")
Reported-by: Maria Mbaye <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
OpenSBI only parses MSI information of the first next level subdomain
for now, which makes the root domain misconfigured in some case:
1. the msi is not enabled on the first subdomain of the root domain,
but other subdomains enable MSI.
2. the root domain is set as direct mode, but its subdomains enable MSI.
So it is needed to parse all child of the root domain, Otherwise, the
some non-root domains are broken. As the specification says, it is
safe to parse the MSI information of all its subdomain and write the
msiaddrcfg register of the non root domain as they are read only.
Parse the aplic MSI information recursively for all aplic device.
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Inochi Amaoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
In case harts are divided into groups that use different
rpmi-hsm channels in different mailboxes, the suspend
state fixup function will return EALREADY on secondary
entry, simply skip on this error.
Reviewed-by: Anup Patel <[email protected]>
Signed-off-by: Ziang Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
OpenSBI is capable of emulating time CSR through an external timer
for HARTs that don't implement a full Zicntr extension. Let's add
Zicntr extension in the FDT if CSR emulation is active.
This avoids hardcoding the extension in the devicetree, which may
confuse pre-SBI bootloaders.
Signed-off-by: Yao Zi <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
It seems that current implementation doesn't fail on fdt_mpxy_init(),
because platforms might not have any MPXY devices. In fact, if there are
no MPXY devices, fdt_driver_init_all() will return SBI_OK.
More importantly, if there is any MPXY device which fails the
initialization, OpenSBI must check the error code and stop the booting.
Thus, this commit adds the return value for fdt_mpxy_init().
Signed-off-by: Alvin Chang <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The discovery of P2A doorbell system MSI index is now through RPMI
shared memory DT node so remove p2a_db_index from RPMI system MSI
attributes and access it as a mailbox channel attribute.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The A2P doorbell value written to the 32-bit A2P doorbell value
must be discoverd from device tree instead of always using the
default value 1.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The P2A doorbell system MSI index is expected to be discovered from
device tree instead of RPMI system MSI service group attribute. This
is based on ARC feedback before RPMI spec was frozen.
Let's parse P2A doorbell system MSI index from device tree and also
expose it as rpmi channel attribute to RPMI client drivers.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The latest device tree bindings define A2P doorbell register name as
"a2p-doorbell" so update rpmi_shmem_transport_init() accordingly.
Signed-off-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Set the scratch allocation alignment to cacheline size specified by
riscv,cbom-block-size in the DTS file to avoid two atomic variables
from the same cache line causing livelock on some platforms. If the
cacheline is not specified, we set it a default value.
Signed-off-by: Raj Vishwanathan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
This function has been obsoleted by the fdt_driver library and is no
longer used.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
No need to initialise the nodes to be added to the linked list
Signed-off-by: Xiang W <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
The PXA variant of the uart8250 adds the UART Unit Enable bit (UUE) that
needs to be set to enable the XScale PXA UART. And it is required for
some RISC-V SoCs like the Spacemit K1 that implement the PXA UART.
This introduces the "intel,xscale-uart" compatible to handle setting the
UUE bit.
Signed-off-by: Junhui Liu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Harts associated with an ACLINT_MSWI need not have sequential hartids.
It is insufficient to use first_hartid and hart_count. To account for
non-sequential hart ids, include the empty hart-ids' generate hart-count.
Signed-off-by: Raj Vishwanathan <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Simplify the code and improve consistency by using the new macros where
possible. sbi_hart_count() obsoletes sbi_scratch_last_hartindex().
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
OpenSBI is compiled with -fPIE, which generally implies dynamic linking.
This causes the compiler to generate GOT references for global symbols
in order to support runtime symbol interposition. However, OpenSBI does
not actually perform dynamic linking, so the GOT indirection just adds
unnecessary overhead.
The GOT references can be avoided by declaring global symbols with
hidden visibility, thus making them local to this dynamic object and
non-interposable. GCC/Clang's -fvisibility parameter is insufficient for
this purpose when referencing objects from other translation units;
either __attribute__((visibility(...)) or the pragma is required. Use
the pragma since it is easier to apply to every symbol. Additionally
clean up the one GOT reference from inline assembly.
With this change, a firmware linked with LLD does not contain either a
GOT or a PLT, and a firmware linked with BFD ld contains only a GOT with
a single (unreferenced, legacy) _GLOBAL_OFFSET_TABLE_ entry.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
first"
This reverts commit 6019259dfbdf9322858b4e7cfc3d1448376e2aa0.
Now that fdt_driver_init_by_offset() respects the compatible string
fallback priority order, this workaround is no longer necessary.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
When matching drivers to DT nodes, always match all drivers against the
first compatible string before considering fallback compatible strings.
This ensures the most specific match is always selected, regardless of
the order of the drivers or match structures, as long as no compatible
string appears in multiple match structures.
Fixes: 1ccc52c427f3 ("lib: utils/fdt: Add helpers for generic driver initialization")
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The T-HEAD C90x PLIC has some special quirks, such as the S-mode
delegation bit. OpenSBI currently handles this by checking the compatible
string in the device tree.
However, this matching is done in the order of the fdt_match array. So if
a device tree contains both strings, for example:
compatible = "thead,c900-plic", "riscv,plic0";
Then OpenSBI will match against the generic "riscv,plic0" string, since
that appears first in the fdt_match array. This means it will fail to set
the S-mode delegation bit, and Linux will fail to boot. In some cases, it
is not possible to change the compatible string to just the T-HEAD PLIC,
as older versions of Linux only recognize the RISC-V compatible string.
This patch fixes that by moving the RISC-V string to the end, ensuring
that the more specific options get matched first.
Signed-off-by: Alex Studer <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This reduces .bss size by 8 KiB, and should reduce overall memory usage
since most platforms will have significantly fewer than 512 entries in
this table. At the same time, it removes the fixed table size limit.
Since the table is only used within fdt_pmu.c, instead of updating the
extern declaration, make the table local to this file.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
If a property value is too small, len will be zero after the division
on the next line, so the property will be ignored. This is the same
behavior as when the length check fails. Furthermore, the first two
length checks were already ineffectual, because each item in those
arrays is 12 bytes long, not 8.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The carray referencing these definitions assumes they are const.
Fixes: 6a26726e08e4 ("lib/utils: reset: Add RPMI System Reset driver")
Fixes: 13f55f33a1d3 ("lib: utils/suspend: Add RPMI system suspend driver")
Fixes: 33ee9b8240fe ("lib: utils/hsm: Add RPMI HSM driver")
Fixes: 591a98bdd549 ("lib: utils/cppc: Add RPMI CPPC driver")
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The supervisor software can directly receive most of the system MSIs
except P2A doorbell and MSIs preferred to be handled in M-mode.
Add MPXY RPMI mailbox client driver for the System MSI service group.
Signed-off-by: Anup Patel <[email protected]>
|
|
The service group ID assignment and some of the BASE services have
changes in the latest RPMI specification so let's update the RPMI
implementation accordingly.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
Use the RPMI mailbox channel attributes to populate MPXY channel
attributes instead of hard coding them.
Signed-off-by: Anup Patel <[email protected]>
|
|
To allow clients query service group version of a RPMI mailbox channel,
implement get_attribute() callback for the RPMI shared memory mailbox
controller.
Signed-off-by: Anup Patel <[email protected]>
|
|
The local variable declarations should be at the start of function
and preferrably organized like a inverted pyramid.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
Currently, the common MPXY RPMI mailbox client does not support
notifications so no need for dummy notifications support.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
Some of the RPMI service groups may need additional context and
special handling when transferring messages via underlying mailbox
channel so introduce optional MPXY RPMI service group operations
for this purpose.
Signed-off-by: Anup Patel <[email protected]>
|
|
The mpxy_rpmi_mbox_data is provided by RPMI service group specific
MPXY driver to the common MPXY RPMI mailbox client implementation
so let's constantify mpxy_rpmi_mbox_data in mpxy_rpmi_mbox so that
it is not accidently modified.
Signed-off-by: Anup Patel <[email protected]>
Reviewed-by: Samuel Holland <[email protected]>
|
|
Instead of having one common FDT MPXY RPMI mailbox client drivers
for various RPMI service groups, split this driver into two parts:
1) Common MPXY RPMI mailbox client library
2) MPXY driver for RPMI clock service group
The above split enables having a separate MPXY driver for each
RPMI clock service group and #1 (above) will allow code sharing
between various MPXY RPMI drivers.
Signed-off-by: Anup Patel <[email protected]>
|
|
For driver subsystems that are not tightly integrated into the OpenSBI
init sequence, it is not important that the drivers are initialized in
any particular order. By putting all of these drivers in one array, they
can all be initialized with a single pass through the devicetree. This
saves about 10 ms of boot time on HiFive Unmatched.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Now that all drivers are using the fdt_driver functions for
initialization, this function is unused and can be removed.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The irqchip driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_irqchip_init() performs a
best-effort initialization of all matching DT nodes.
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
