[bsp/Infineon] Fix PWM macro mismatches left by the CHx_PORTy rename (#11802)

* [bsp/Infineon] Fix PWM macro mismatches left by the CHx_PORTy rename

Commit e5382cb733 renamed the PWM table guards in drv_pwm.c to the
CHx_PORTy convention but only adapted the psoc6-evk Kconfig, leaving
several mismatches behind:

- The psoc6-evaluationkit-062S2 slider sample still tested the old
  flat name BSP_USING_PWM0_PORT0 while the board Kconfig defines
  BSP_USING_PWM0_CH0_PORT0, so the PWM init was compiled out.
- The PORT13 entry was renamed to BSP_USING_PWM0_CH7_PORT13, a macro
  that no Kconfig defines, and the channel is wrong anyway:
  PWM0_CH3_PORT13_CONFIG carries .channel = 3, PORT13 sits under the
  PWM0 CH3 menu, and the slider demo selects CH3 + PORT13.
- The PSOC62 template and five psoc6 boards (cy8ckit-062-BLE,
  cy8ckit-062-WIFI-BT, cy8ckit-062S2-43012, cy8ckit-062s4,
  cy8cproto-062S3-4343W) still define the old flat names.

Fix all of them by migrating the evaluationkit sample to
BSP_USING_PWM0_CH0_PORT0 and renaming the PORT13 group to
BSP_USING_PWM0_CH3_PORT13 across drv_pwm.c, the PSOC62 template and
the five boards' Kconfigs/slider samples, so Kconfig, driver table
and samples match again.

Note: the sibling guards BSP_USING_PWM0_CH7_PORT2/5/7/9/10/12 are
still not generated by these boards' Kconfigs; left untouched for a
separate discussion.

* style: format code with clang-format [skip ci]

14 files changed, 125 insertions, 140 deletions

diff --git a/bsp/Infineon/libraries/HAL_Drivers/drv_pwm.c b/bsp/Infineon/libraries/HAL_Drivers/drv_pwm.c
index af7afbde11..53799748e5 100644
--- a/bsp/Infineon/libraries/HAL_Drivers/drv_pwm.c
+++ b/bsp/Infineon/libraries/HAL_Drivers/drv_pwm.c
@@ -29,8 +29,7 @@ struct ifx_pwm
     rt_uint8_t gpio;
 };
 
-static struct ifx_pwm ifx_pwm_obj[] =
-{
+static struct ifx_pwm ifx_pwm_obj[] = {
 #ifdef BSP_USING_PWM0_CH0_PORT0
     PWM0_CH0_PORT0_CONFIG,
 #endif
@@ -75,7 +74,7 @@ static struct ifx_pwm ifx_pwm_obj[] =
     PWM0_CH7_PORT12_CONFIG,
 #endif
 
-#ifdef BSP_USING_PWM0_CH7_PORT13
+#ifdef BSP_USING_PWM0_CH3_PORT13
     PWM0_CH3_PORT13_CONFIG,
 #endif
 };
@@ -89,12 +88,12 @@ static rt_err_t drv_pwm_enable(cyhal_pwm_t *htim, struct rt_pwm_configuration *c
     {
         if (!enable)
         {
-                        htim->tcpwm.resource.channel_num = channel;
+            htim->tcpwm.resource.channel_num = channel;
             cyhal_pwm_stop(htim);
         }
         else
         {
-                        htim->tcpwm.resource.channel_num = channel;
+            htim->tcpwm.resource.channel_num = channel;
             cyhal_pwm_start(htim);
         }
     }
@@ -163,7 +162,7 @@ static rt_err_t drv_pwm_control(struct rt_device_pwm *device, int cmd, void *arg
     }
 }
 
-static struct rt_pwm_ops drv_ops = {drv_pwm_control};
+static struct rt_pwm_ops drv_ops = { drv_pwm_control };
 
 static rt_err_t ifx_hw_pwm_init(struct ifx_pwm *device)
 {
@@ -218,7 +217,7 @@ __exit:
 }
 INIT_BOARD_EXPORT(rt_hw_pwm_init);
 
-#define PWM_DEV_NAME "pwm0"
+#define PWM_DEV_NAME    "pwm0"
 #define PWM_DEV_CHANNEL 4
 
 struct rt_device_pwm *pwm_dev;
diff --git a/bsp/Infineon/libraries/templates/PSOC62/board/Kconfig b/bsp/Infineon/libraries/templates/PSOC62/board/Kconfig
index a8530c34de..12042f859b 100644
--- a/bsp/Infineon/libraries/templates/PSOC62/board/Kconfig
+++ b/bsp/Infineon/libraries/templates/PSOC62/board/Kconfig
@@ -61,8 +61,8 @@ menu "On-chip Peripheral Drivers"
                     bool "Enable PWM0 channel3"
                     default n
                     if BSP_USING_PWM0_CH3
-                        config BSP_USING_PWM0_PORT13
-                        bool "Enable PWM0-PORT13 output pwm"
+                        config BSP_USING_PWM0_CH3_PORT13
+                        bool "Enable PWM0-CH3-PORT13 output pwm"
                         default n
                     endif
                 menuconfig BSP_USING_PWM0_CH7
diff --git a/bsp/Infineon/libraries/templates/PSOC62/board/ports/slider_sample.c b/bsp/Infineon/libraries/templates/PSOC62/board/ports/slider_sample.c
index 829094f5f2..ed5ccc2013 100644
--- a/bsp/Infineon/libraries/templates/PSOC62/board/ports/slider_sample.c
+++ b/bsp/Infineon/libraries/templates/PSOC62/board/ports/slider_sample.c
@@ -14,16 +14,16 @@
 #ifdef BSP_USING_SLIDER
 #include "cycfg_capsense.h"
 
-#define CAPSENSE_INTR_PRIORITY      (7u)
-#define EZI2C_INTR_PRIORITY         (6u)
+#define CAPSENSE_INTR_PRIORITY (7u)
+#define EZI2C_INTR_PRIORITY    (6u)
 
 /* Allowed duty cycle for maximum brightness */
-#define LED_MAX_BRIGHTNESS      (100u)
+#define LED_MAX_BRIGHTNESS (100u)
 
 /* Allowed duty cycle for minimum brightness*/
-#define LED_MIN_BRIGHTNESS      (0u)
+#define LED_MIN_BRIGHTNESS (0u)
 
-#define GET_DUTY_CYCLE(x)       (1 * 1000 * 1000 - x * 10 * 1000)
+#define GET_DUTY_CYCLE(x) (1 * 1000 * 1000 - x * 10 * 1000)
 
 typedef enum
 {
@@ -40,11 +40,11 @@ typedef struct
 static rt_sem_t trans_done_semphr = RT_NULL;
 
 #ifndef RT_USING_PWM
-    #error You need enable PWM to use this sample
+#error You need enable PWM to use this sample
 #else
-    #define PWM_DEV_NAME "pwm0"
-    #define PWM_DEV_CHANNEL 3
-    static struct rt_device_pwm *pwm_dev;
+#define PWM_DEV_NAME    "pwm0"
+#define PWM_DEV_CHANNEL 3
+static struct rt_device_pwm *pwm_dev;
 #endif
 
 static void capsense_isr(void)
@@ -68,8 +68,7 @@ static uint32_t initialize_capsense(void)
     uint32_t status = CYRET_SUCCESS;
 
     /* CapSense interrupt configuration parameters */
-    static const cy_stc_sysint_t capSense_intr_config =
-    {
+    static const cy_stc_sysint_t capSense_intr_config = {
         .intrSrc = csd_interrupt_IRQn,
         .intrPriority = CAPSENSE_INTR_PRIORITY,
     };
@@ -127,7 +126,7 @@ void Slider_Init(void)
         return;
     }
 
-#ifdef BSP_USING_PWM0_PORT13
+#ifdef BSP_USING_PWM0_CH3_PORT13
     /* Initiate PWM*/
     pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM_DEV_NAME);
 
@@ -162,20 +161,19 @@ static void process_touch(void)
     bool led_update_req = false;
 
     static uint16_t slider_pos_prev;
-    static led_data_t led_data = {LED_ON, LED_MAX_BRIGHTNESS};
+    static led_data_t led_data = { LED_ON, LED_MAX_BRIGHTNESS };
 
     /* Get slider status */
     slider_touch_info = Cy_CapSense_GetTouchInfo(
-                            CY_CAPSENSE_LINEARSLIDER0_WDGT_ID, &cy_capsense_context);
+        CY_CAPSENSE_LINEARSLIDER0_WDGT_ID, &cy_capsense_context);
     slider_touch_status = slider_touch_info->numPosition;
     slider_pos = slider_touch_info->ptrPosition->x;
 
     /* Detect the new touch on slider */
     if ((RT_NULL != slider_touch_status) &&
-            (slider_pos != slider_pos_prev))
+        (slider_pos != slider_pos_prev))
     {
-        led_data.brightness = (slider_pos * 100)
-                              / cy_capsense_context.ptrWdConfig[CY_CAPSENSE_LINEARSLIDER0_WDGT_ID].xResolution;
+        led_data.brightness = (slider_pos * 100) / cy_capsense_context.ptrWdConfig[CY_CAPSENSE_LINEARSLIDER0_WDGT_ID].xResolution;
 
         led_update_req = true;
     }
diff --git a/bsp/Infineon/psoc6-cy8ckit-062-BLE/board/Kconfig b/bsp/Infineon/psoc6-cy8ckit-062-BLE/board/Kconfig
index b5e7066949..6d268136a8 100644
--- a/bsp/Infineon/psoc6-cy8ckit-062-BLE/board/Kconfig
+++ b/bsp/Infineon/psoc6-cy8ckit-062-BLE/board/Kconfig
@@ -61,8 +61,8 @@ menu "On-chip Peripheral Drivers"
                     bool "Enable PWM0 channel3"
                     default n
                     if BSP_USING_PWM0_CH3
-                        config BSP_USING_PWM0_PORT13
-                        bool "Enable PWM0-PORT13 output pwm"
+                        config BSP_USING_PWM0_CH3_PORT13
+                        bool "Enable PWM0-CH3-PORT13 output pwm"
                         default n
                     endif
                 menuconfig BSP_USING_PWM0_CH7
diff --git a/bsp/Infineon/psoc6-cy8ckit-062-BLE/board/ports/slider_sample.c b/bsp/Infineon/psoc6-cy8ckit-062-BLE/board/ports/slider_sample.c
index 829094f5f2..ed5ccc2013 100644
--- a/bsp/Infineon/psoc6-cy8ckit-062-BLE/board/ports/slider_sample.c
+++ b/bsp/Infineon/psoc6-cy8ckit-062-BLE/board/ports/slider_sample.c
@@ -14,16 +14,16 @@
 #ifdef BSP_USING_SLIDER
 #include "cycfg_capsense.h"
 
-#define CAPSENSE_INTR_PRIORITY      (7u)
-#define EZI2C_INTR_PRIORITY         (6u)
+#define CAPSENSE_INTR_PRIORITY (7u)
+#define EZI2C_INTR_PRIORITY    (6u)
 
 /* Allowed duty cycle for maximum brightness */
-#define LED_MAX_BRIGHTNESS      (100u)
+#define LED_MAX_BRIGHTNESS (100u)
 
 /* Allowed duty cycle for minimum brightness*/
-#define LED_MIN_BRIGHTNESS      (0u)
+#define LED_MIN_BRIGHTNESS (0u)
 
-#define GET_DUTY_CYCLE(x)       (1 * 1000 * 1000 - x * 10 * 1000)
+#define GET_DUTY_CYCLE(x) (1 * 1000 * 1000 - x * 10 * 1000)
 
 typedef enum
 {
@@ -40,11 +40,11 @@ typedef struct
 static rt_sem_t trans_done_semphr = RT_NULL;
 
 #ifndef RT_USING_PWM
-    #error You need enable PWM to use this sample
+#error You need enable PWM to use this sample
 #else
-    #define PWM_DEV_NAME "pwm0"
-    #define PWM_DEV_CHANNEL 3
-    static struct rt_device_pwm *pwm_dev;
+#define PWM_DEV_NAME    "pwm0"
+#define PWM_DEV_CHANNEL 3
+static struct rt_device_pwm *pwm_dev;
 #endif
 
 static void capsense_isr(void)
@@ -68,8 +68,7 @@ static uint32_t initialize_capsense(void)
     uint32_t status = CYRET_SUCCESS;
 
     /* CapSense interrupt configuration parameters */
-    static const cy_stc_sysint_t capSense_intr_config =
-    {
+    static const cy_stc_sysint_t capSense_intr_config = {
         .intrSrc = csd_interrupt_IRQn,
         .intrPriority = CAPSENSE_INTR_PRIORITY,
     };
@@ -127,7 +126,7 @@ void Slider_Init(void)
         return;
     }
 
-#ifdef BSP_USING_PWM0_PORT13
+#ifdef BSP_USING_PWM0_CH3_PORT13
     /* Initiate PWM*/
     pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM_DEV_NAME);
 
@@ -162,20 +161,19 @@ static void process_touch(void)
     bool led_update_req = false;
 
     static uint16_t slider_pos_prev;
-    static led_data_t led_data = {LED_ON, LED_MAX_BRIGHTNESS};
+    static led_data_t led_data = { LED_ON, LED_MAX_BRIGHTNESS };
 
     /* Get slider status */
     slider_touch_info = Cy_CapSense_GetTouchInfo(
-                            CY_CAPSENSE_LINEARSLIDER0_WDGT_ID, &cy_capsense_context);
+        CY_CAPSENSE_LINEARSLIDER0_WDGT_ID, &cy_capsense_context);
     slider_touch_status = slider_touch_info->numPosition;
     slider_pos = slider_touch_info->ptrPosition->x;
 
     /* Detect the new touch on slider */
     if ((RT_NULL != slider_touch_status) &&
-            (slider_pos != slider_pos_prev))
+        (slider_pos != slider_pos_prev))
     {
-        led_data.brightness = (slider_pos * 100)
-                              / cy_capsense_context.ptrWdConfig[CY_CAPSENSE_LINEARSLIDER0_WDGT_ID].xResolution;
+        led_data.brightness = (slider_pos * 100) / cy_capsense_context.ptrWdConfig[CY_CAPSENSE_LINEARSLIDER0_WDGT_ID].xResolution;
 
         led_update_req = true;
     }
diff --git a/bsp/Infineon/psoc6-cy8ckit-062-WIFI-BT/board/Kconfig b/bsp/Infineon/psoc6-cy8ckit-062-WIFI-BT/board/Kconfig
index d2331656df..2398aa9f3a 100644
--- a/bsp/Infineon/psoc6-cy8ckit-062-WIFI-BT/board/Kconfig
+++ b/bsp/Infineon/psoc6-cy8ckit-062-WIFI-BT/board/Kconfig
@@ -61,8 +61,8 @@ menu "On-chip Peripheral Drivers"
                     bool "Enable PWM0 channel3"
                     default n
                     if BSP_USING_PWM0_CH3
-                        config BSP_USING_PWM0_PORT13
-                        bool "Enable PWM0-PORT13 output pwm"
+                        config BSP_USING_PWM0_CH3_PORT13
+                        bool "Enable PWM0-CH3-PORT13 output pwm"
                         default n
                     endif
                 menuconfig BSP_USING_PWM0_CH7
diff --git a/bsp/Infineon/psoc6-cy8ckit-062-WIFI-BT/board/ports/slider_sample.c b/bsp/Infineon/psoc6-cy8ckit-062-WIFI-BT/board/ports/slider_sample.c
index 829094f5f2..ed5ccc2013 100644
--- a/bsp/Infineon/psoc6-cy8ckit-062-WIFI-BT/board/ports/slider_sample.c
+++ b/bsp/Infineon/psoc6-cy8ckit-062-WIFI-BT/board/ports/slider_sample.c
@@ -14,16 +14,16 @@
 #ifdef BSP_USING_SLIDER
 #include "cycfg_capsense.h"
 
-#define CAPSENSE_INTR_PRIORITY      (7u)
-#define EZI2C_INTR_PRIORITY         (6u)
+#define CAPSENSE_INTR_PRIORITY (7u)
+#define EZI2C_INTR_PRIORITY    (6u)
 
 /* Allowed duty cycle for maximum brightness */
-#define LED_MAX_BRIGHTNESS      (100u)
+#define LED_MAX_BRIGHTNESS (100u)
 
 /* Allowed duty cycle for minimum brightness*/
-#define LED_MIN_BRIGHTNESS      (0u)
+#define LED_MIN_BRIGHTNESS (0u)
 
-#define GET_DUTY_CYCLE(x)       (1 * 1000 * 1000 - x * 10 * 1000)
+#define GET_DUTY_CYCLE(x) (1 * 1000 * 1000 - x * 10 * 1000)
 
 typedef enum
 {
@@ -40,11 +40,11 @@ typedef struct
 static rt_sem_t trans_done_semphr = RT_NULL;
 
 #ifndef RT_USING_PWM
-    #error You need enable PWM to use this sample
+#error You need enable PWM to use this sample
 #else
-    #define PWM_DEV_NAME "pwm0"
-    #define PWM_DEV_CHANNEL 3
-    static struct rt_device_pwm *pwm_dev;
+#define PWM_DEV_NAME    "pwm0"
+#define PWM_DEV_CHANNEL 3
+static struct rt_device_pwm *pwm_dev;
 #endif
 
 static void capsense_isr(void)
@@ -68,8 +68,7 @@ static uint32_t initialize_capsense(void)
     uint32_t status = CYRET_SUCCESS;
 
     /* CapSense interrupt configuration parameters */
-    static const cy_stc_sysint_t capSense_intr_config =
-    {
+    static const cy_stc_sysint_t capSense_intr_config = {
         .intrSrc = csd_interrupt_IRQn,
         .intrPriority = CAPSENSE_INTR_PRIORITY,
     };
@@ -127,7 +126,7 @@ void Slider_Init(void)
         return;
     }
 
-#ifdef BSP_USING_PWM0_PORT13
+#ifdef BSP_USING_PWM0_CH3_PORT13
     /* Initiate PWM*/
     pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM_DEV_NAME);
 
@@ -162,20 +161,19 @@ static void process_touch(void)
     bool led_update_req = false;
 
     static uint16_t slider_pos_prev;
-    static led_data_t led_data = {LED_ON, LED_MAX_BRIGHTNESS};
+    static led_data_t led_data = { LED_ON, LED_MAX_BRIGHTNESS };
 
     /* Get slider status */
     slider_touch_info = Cy_CapSense_GetTouchInfo(
-                            CY_CAPSENSE_LINEARSLIDER0_WDGT_ID, &cy_capsense_context);
+        CY_CAPSENSE_LINEARSLIDER0_WDGT_ID, &cy_capsense_context);
     slider_touch_status = slider_touch_info->numPosition;
     slider_pos = slider_touch_info->ptrPosition->x;
 
     /* Detect the new touch on slider */
     if ((RT_NULL != slider_touch_status) &&
-            (slider_pos != slider_pos_prev))
+        (slider_pos != slider_pos_prev))
     {
-        led_data.brightness = (slider_pos * 100)
-                              / cy_capsense_context.ptrWdConfig[CY_CAPSENSE_LINEARSLIDER0_WDGT_ID].xResolution;
+        led_data.brightness = (slider_pos * 100) / cy_capsense_context.ptrWdConfig[CY_CAPSENSE_LINEARSLIDER0_WDGT_ID].xResolution;
 
         led_update_req = true;
     }
diff --git a/bsp/Infineon/psoc6-cy8ckit-062S2-43012/board/Kconfig b/bsp/Infineon/psoc6-cy8ckit-062S2-43012/board/Kconfig
index e39798ab56..f6ba3eb1bd 100644
--- a/bsp/Infineon/psoc6-cy8ckit-062S2-43012/board/Kconfig
+++ b/bsp/Infineon/psoc6-cy8ckit-062S2-43012/board/Kconfig
@@ -61,8 +61,8 @@ menu "On-chip Peripheral Drivers"
                     bool "Enable PWM0 channel3"
                     default n
                     if BSP_USING_PWM0_CH3
-                        config BSP_USING_PWM0_PORT13
-                        bool "Enable PWM0-PORT13 output pwm"
+                        config BSP_USING_PWM0_CH3_PORT13
+                        bool "Enable PWM0-CH3-PORT13 output pwm"
                         default n
                     endif
                 menuconfig BSP_USING_PWM0_CH7
@@ -270,7 +270,7 @@ menu "Board extended module Drivers"
             select BSP_USING_PWM
             select BSP_USING_PWM0
             select BSP_USING_PWM0_CH3
-            select BSP_USING_PWM0_PORT13
+            select BSP_USING_PWM0_CH3_PORT13
             default n
     endif
 
diff --git a/bsp/Infineon/psoc6-cy8ckit-062S2-43012/board/ports/slider_sample.c b/bsp/Infineon/psoc6-cy8ckit-062S2-43012/board/ports/slider_sample.c
index a4599ceaa7..e60a2a8275 100644
--- a/bsp/Infineon/psoc6-cy8ckit-062S2-43012/board/ports/slider_sample.c
+++ b/bsp/Infineon/psoc6-cy8ckit-062S2-43012/board/ports/slider_sample.c
@@ -14,16 +14,16 @@
 #ifdef BSP_USING_SLIDER
 #include "cycfg_capsense.h"
 
-#define CAPSENSE_INTR_PRIORITY      (7u)
-#define EZI2C_INTR_PRIORITY         (6u)
+#define CAPSENSE_INTR_PRIORITY (7u)
+#define EZI2C_INTR_PRIORITY    (6u)
 
 /* Allowed duty cycle for maximum brightness */
-#define LED_MAX_BRIGHTNESS      (100u)
+#define LED_MAX_BRIGHTNESS (100u)
 
 /* Allowed duty cycle for minimum brightness*/
-#define LED_MIN_BRIGHTNESS      (0u)
+#define LED_MIN_BRIGHTNESS (0u)
 
-#define GET_DUTY_CYCLE(x)       (1 * 1000 * 1000 - x * 10 * 1000)
+#define GET_DUTY_CYCLE(x) (1 * 1000 * 1000 - x * 10 * 1000)
 
 typedef enum
 {
@@ -41,11 +41,11 @@ static rt_sem_t trans_done_semphr = RT_NULL;
 static rt_thread_t sld_thread = RT_NULL;
 
 #ifndef RT_USING_PWM
-    #error You need enable PWM to use this sample
+#error You need enable PWM to use this sample
 #else
-    #define PWM_DEV_NAME "pwm0"
-    #define PWM_DEV_CHANNEL 3
-    static struct rt_device_pwm *pwm_dev;
+#define PWM_DEV_NAME    "pwm0"
+#define PWM_DEV_CHANNEL 3
+static struct rt_device_pwm *pwm_dev;
 #endif
 
 static void capsense_isr(void)
@@ -69,8 +69,7 @@ static uint32_t initialize_capsense(void)
     uint32_t status = CYRET_SUCCESS;
 
     /* CapSense interrupt configuration parameters */
-    static const cy_stc_sysint_t capSense_intr_config =
-    {
+    static const cy_stc_sysint_t capSense_intr_config = {
         .intrSrc = csd_interrupt_IRQn,
         .intrPriority = CAPSENSE_INTR_PRIORITY,
     };
@@ -128,7 +127,7 @@ void Slider_Init(void)
         return;
     }
 
-#ifdef BSP_USING_PWM0_PORT13
+#ifdef BSP_USING_PWM0_CH3_PORT13
     /* Initiate PWM*/
     pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM_DEV_NAME);
 
@@ -163,20 +162,19 @@ static void process_touch(void)
     bool led_update_req = false;
 
     static uint16_t slider_pos_prev;
-    static led_data_t led_data = {LED_ON, LED_MAX_BRIGHTNESS};
+    static led_data_t led_data = { LED_ON, LED_MAX_BRIGHTNESS };
 
     /* Get slider status */
     slider_touch_info = Cy_CapSense_GetTouchInfo(
-                            CY_CAPSENSE_LINEARSLIDER0_WDGT_ID, &cy_capsense_context);
+        CY_CAPSENSE_LINEARSLIDER0_WDGT_ID, &cy_capsense_context);
     slider_touch_status = slider_touch_info->numPosition;
     slider_pos = slider_touch_info->ptrPosition->x;
 
     /* Detect the new touch on slider */
     if ((RT_NULL != slider_touch_status) &&
-            (slider_pos != slider_pos_prev))
+        (slider_pos != slider_pos_prev))
     {
-        led_data.brightness = (slider_pos * 100)
-                              / cy_capsense_context.ptrWdConfig[CY_CAPSENSE_LINEARSLIDER0_WDGT_ID].xResolution;
+        led_data.brightness = (slider_pos * 100) / cy_capsense_context.ptrWdConfig[CY_CAPSENSE_LINEARSLIDER0_WDGT_ID].xResolution;
 
         led_update_req = true;
     }
diff --git a/bsp/Infineon/psoc6-cy8ckit-062s4/board/Kconfig b/bsp/Infineon/psoc6-cy8ckit-062s4/board/Kconfig
index 67de175efd..7c83b2a756 100644
--- a/bsp/Infineon/psoc6-cy8ckit-062s4/board/Kconfig
+++ b/bsp/Infineon/psoc6-cy8ckit-062s4/board/Kconfig
@@ -61,8 +61,8 @@ menu "On-chip Peripheral Drivers"
                     bool "Enable PWM0 channel3"
                     default n
                     if BSP_USING_PWM0_CH3
-                        config BSP_USING_PWM0_PORT13
-                        bool "Enable PWM0-PORT13 output pwm"
+                        config BSP_USING_PWM0_CH3_PORT13
+                        bool "Enable PWM0-CH3-PORT13 output pwm"
                         default n
                     endif
                 menuconfig BSP_USING_PWM0_CH7
diff --git a/bsp/Infineon/psoc6-cy8ckit-062s4/board/ports/slider_sample.c b/bsp/Infineon/psoc6-cy8ckit-062s4/board/ports/slider_sample.c
index 829094f5f2..ed5ccc2013 100644
--- a/bsp/Infineon/psoc6-cy8ckit-062s4/board/ports/slider_sample.c
+++ b/bsp/Infineon/psoc6-cy8ckit-062s4/board/ports/slider_sample.c
@@ -14,16 +14,16 @@
 #ifdef BSP_USING_SLIDER
 #include "cycfg_capsense.h"
 
-#define CAPSENSE_INTR_PRIORITY      (7u)
-#define EZI2C_INTR_PRIORITY         (6u)
+#define CAPSENSE_INTR_PRIORITY (7u)
+#define EZI2C_INTR_PRIORITY    (6u)
 
 /* Allowed duty cycle for maximum brightness */
-#define LED_MAX_BRIGHTNESS      (100u)
+#define LED_MAX_BRIGHTNESS (100u)
 
 /* Allowed duty cycle for minimum brightness*/
-#define LED_MIN_BRIGHTNESS      (0u)
+#define LED_MIN_BRIGHTNESS (0u)
 
-#define GET_DUTY_CYCLE(x)       (1 * 1000 * 1000 - x * 10 * 1000)
+#define GET_DUTY_CYCLE(x) (1 * 1000 * 1000 - x * 10 * 1000)
 
 typedef enum
 {
@@ -40,11 +40,11 @@ typedef struct
 static rt_sem_t trans_done_semphr = RT_NULL;
 
 #ifndef RT_USING_PWM
-    #error You need enable PWM to use this sample
+#error You need enable PWM to use this sample
 #else
-    #define PWM_DEV_NAME "pwm0"
-    #define PWM_DEV_CHANNEL 3
-    static struct rt_device_pwm *pwm_dev;
+#define PWM_DEV_NAME    "pwm0"
+#define PWM_DEV_CHANNEL 3
+static struct rt_device_pwm *pwm_dev;
 #endif
 
 static void capsense_isr(void)
@@ -68,8 +68,7 @@ static uint32_t initialize_capsense(void)
     uint32_t status = CYRET_SUCCESS;
 
     /* CapSense interrupt configuration parameters */
-    static const cy_stc_sysint_t capSense_intr_config =
-    {
+    static const cy_stc_sysint_t capSense_intr_config = {
         .intrSrc = csd_interrupt_IRQn,
         .intrPriority = CAPSENSE_INTR_PRIORITY,
     };
@@ -127,7 +126,7 @@ void Slider_Init(void)
         return;
     }
 
-#ifdef BSP_USING_PWM0_PORT13
+#ifdef BSP_USING_PWM0_CH3_PORT13
     /* Initiate PWM*/
     pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM_DEV_NAME);
 
@@ -162,20 +161,19 @@ static void process_touch(void)
     bool led_update_req = false;
 
     static uint16_t slider_pos_prev;
-    static led_data_t led_data = {LED_ON, LED_MAX_BRIGHTNESS};
+    static led_data_t led_data = { LED_ON, LED_MAX_BRIGHTNESS };
 
     /* Get slider status */
     slider_touch_info = Cy_CapSense_GetTouchInfo(
-                            CY_CAPSENSE_LINEARSLIDER0_WDGT_ID, &cy_capsense_context);
+        CY_CAPSENSE_LINEARSLIDER0_WDGT_ID, &cy_capsense_context);
     slider_touch_status = slider_touch_info->numPosition;
     slider_pos = slider_touch_info->ptrPosition->x;
 
     /* Detect the new touch on slider */
     if ((RT_NULL != slider_touch_status) &&
-            (slider_pos != slider_pos_prev))
+        (slider_pos != slider_pos_prev))
     {
-        led_data.brightness = (slider_pos * 100)
-                              / cy_capsense_context.ptrWdConfig[CY_CAPSENSE_LINEARSLIDER0_WDGT_ID].xResolution;
+        led_data.brightness = (slider_pos * 100) / cy_capsense_context.ptrWdConfig[CY_CAPSENSE_LINEARSLIDER0_WDGT_ID].xResolution;
 
         led_update_req = true;
     }
diff --git a/bsp/Infineon/psoc6-cy8cproto-062S3-4343W/board/Kconfig b/bsp/Infineon/psoc6-cy8cproto-062S3-4343W/board/Kconfig
index 2ce35dc704..7b6f79b46f 100644
--- a/bsp/Infineon/psoc6-cy8cproto-062S3-4343W/board/Kconfig
+++ b/bsp/Infineon/psoc6-cy8cproto-062S3-4343W/board/Kconfig
@@ -61,8 +61,8 @@ menu "On-chip Peripheral Drivers"
                     bool "Enable PWM0 channel3"
                     default n
                     if BSP_USING_PWM0_CH3
-                        config BSP_USING_PWM0_PORT13
-                        bool "Enable PWM0-PORT13 output pwm"
+                        config BSP_USING_PWM0_CH3_PORT13
+                        bool "Enable PWM0-CH3-PORT13 output pwm"
                         default n
                     endif
                 menuconfig BSP_USING_PWM0_CH7
@@ -270,7 +270,7 @@ menu "Board extended module Drivers"
             select BSP_USING_PWM
             select BSP_USING_PWM0
             select BSP_USING_PWM0_CH3
-            select BSP_USING_PWM0_PORT13
+            select BSP_USING_PWM0_CH3_PORT13
             default n
     endif
 
diff --git a/bsp/Infineon/psoc6-cy8cproto-062S3-4343W/board/ports/slider_sample.c b/bsp/Infineon/psoc6-cy8cproto-062S3-4343W/board/ports/slider_sample.c
index a4599ceaa7..e60a2a8275 100644
--- a/bsp/Infineon/psoc6-cy8cproto-062S3-4343W/board/ports/slider_sample.c
+++ b/bsp/Infineon/psoc6-cy8cproto-062S3-4343W/board/ports/slider_sample.c
@@ -14,16 +14,16 @@
 #ifdef BSP_USING_SLIDER
 #include "cycfg_capsense.h"
 
-#define CAPSENSE_INTR_PRIORITY      (7u)
-#define EZI2C_INTR_PRIORITY         (6u)
+#define CAPSENSE_INTR_PRIORITY (7u)
+#define EZI2C_INTR_PRIORITY    (6u)
 
 /* Allowed duty cycle for maximum brightness */
-#define LED_MAX_BRIGHTNESS      (100u)
+#define LED_MAX_BRIGHTNESS (100u)
 
 /* Allowed duty cycle for minimum brightness*/
-#define LED_MIN_BRIGHTNESS      (0u)
+#define LED_MIN_BRIGHTNESS (0u)
 
-#define GET_DUTY_CYCLE(x)       (1 * 1000 * 1000 - x * 10 * 1000)
+#define GET_DUTY_CYCLE(x) (1 * 1000 * 1000 - x * 10 * 1000)
 
 typedef enum
 {
@@ -41,11 +41,11 @@ static rt_sem_t trans_done_semphr = RT_NULL;
 static rt_thread_t sld_thread = RT_NULL;
 
 #ifndef RT_USING_PWM
-    #error You need enable PWM to use this sample
+#error You need enable PWM to use this sample
 #else
-    #define PWM_DEV_NAME "pwm0"
-    #define PWM_DEV_CHANNEL 3
-    static struct rt_device_pwm *pwm_dev;
+#define PWM_DEV_NAME    "pwm0"
+#define PWM_DEV_CHANNEL 3
+static struct rt_device_pwm *pwm_dev;
 #endif
 
 static void capsense_isr(void)
@@ -69,8 +69,7 @@ static uint32_t initialize_capsense(void)
     uint32_t status = CYRET_SUCCESS;
 
     /* CapSense interrupt configuration parameters */
-    static const cy_stc_sysint_t capSense_intr_config =
-    {
+    static const cy_stc_sysint_t capSense_intr_config = {
         .intrSrc = csd_interrupt_IRQn,
         .intrPriority = CAPSENSE_INTR_PRIORITY,
     };
@@ -128,7 +127,7 @@ void Slider_Init(void)
         return;
     }
 
-#ifdef BSP_USING_PWM0_PORT13
+#ifdef BSP_USING_PWM0_CH3_PORT13
     /* Initiate PWM*/
     pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM_DEV_NAME);
 
@@ -163,20 +162,19 @@ static void process_touch(void)
     bool led_update_req = false;
 
     static uint16_t slider_pos_prev;
-    static led_data_t led_data = {LED_ON, LED_MAX_BRIGHTNESS};
+    static led_data_t led_data = { LED_ON, LED_MAX_BRIGHTNESS };
 
     /* Get slider status */
     slider_touch_info = Cy_CapSense_GetTouchInfo(
-                            CY_CAPSENSE_LINEARSLIDER0_WDGT_ID, &cy_capsense_context);
+        CY_CAPSENSE_LINEARSLIDER0_WDGT_ID, &cy_capsense_context);
     slider_touch_status = slider_touch_info->numPosition;
     slider_pos = slider_touch_info->ptrPosition->x;
 
     /* Detect the new touch on slider */
     if ((RT_NULL != slider_touch_status) &&
-            (slider_pos != slider_pos_prev))
+        (slider_pos != slider_pos_prev))
     {
-        led_data.brightness = (slider_pos * 100)
-                              / cy_capsense_context.ptrWdConfig[CY_CAPSENSE_LINEARSLIDER0_WDGT_ID].xResolution;
+        led_data.brightness = (slider_pos * 100) / cy_capsense_context.ptrWdConfig[CY_CAPSENSE_LINEARSLIDER0_WDGT_ID].xResolution;
 
         led_update_req = true;
     }
diff --git a/bsp/Infineon/psoc6-evaluationkit-062S2/board/ports/slider_sample.c b/bsp/Infineon/psoc6-evaluationkit-062S2/board/ports/slider_sample.c
index cc7931fa57..3fe4f1fecd 100644
--- a/bsp/Infineon/psoc6-evaluationkit-062S2/board/ports/slider_sample.c
+++ b/bsp/Infineon/psoc6-evaluationkit-062S2/board/ports/slider_sample.c
@@ -14,16 +14,16 @@
 #ifdef BSP_USING_SLIDER
 #include "cycfg_capsense.h"
 
-#define CAPSENSE_INTR_PRIORITY      (7u)
-#define EZI2C_INTR_PRIORITY         (6u)
+#define CAPSENSE_INTR_PRIORITY (7u)
+#define EZI2C_INTR_PRIORITY    (6u)
 
 /* Allowed duty cycle for maximum brightness */
-#define LED_MAX_BRIGHTNESS      (100u)
+#define LED_MAX_BRIGHTNESS (100u)
 
 /* Allowed duty cycle for minimum brightness*/
-#define LED_MIN_BRIGHTNESS      (0u)
+#define LED_MIN_BRIGHTNESS (0u)
 
-#define GET_DUTY_CYCLE(x)       (1 * 1000 * 1000 - x * 10 * 1000)
+#define GET_DUTY_CYCLE(x) (1 * 1000 * 1000 - x * 10 * 1000)
 
 typedef enum
 {
@@ -41,11 +41,11 @@ static rt_sem_t trans_done_semphr = RT_NULL;
 static rt_thread_t sld_thread = RT_NULL;
 
 #ifndef RT_USING_PWM
-    #error You need enable PWM to use this sample
+#error You need enable PWM to use this sample
 #else
-    #define PWM_DEV_NAME "pwm0"
-    #define PWM_DEV_CHANNEL 0
-    static struct rt_device_pwm *pwm_dev;
+#define PWM_DEV_NAME    "pwm0"
+#define PWM_DEV_CHANNEL 0
+static struct rt_device_pwm *pwm_dev;
 #endif
 
 static void capsense_isr(void)
@@ -69,8 +69,7 @@ static uint32_t initialize_capsense(void)
     uint32_t status = CYRET_SUCCESS;
 
     /* CapSense interrupt configuration parameters */
-    static const cy_stc_sysint_t capSense_intr_config =
-    {
+    static const cy_stc_sysint_t capSense_intr_config = {
         .intrSrc = csd_interrupt_IRQn,
         .intrPriority = CAPSENSE_INTR_PRIORITY,
     };
@@ -128,7 +127,7 @@ void Slider_Init(void)
         return;
     }
 
-#ifdef BSP_USING_PWM0_PORT0
+#ifdef BSP_USING_PWM0_CH0_PORT0
     /* Initiate PWM*/
     pwm_dev = (struct rt_device_pwm *)rt_device_find(PWM_DEV_NAME);
 
@@ -163,20 +162,19 @@ static void process_touch(void)
     bool led_update_req = false;
 
     static uint16_t slider_pos_prev;
-    static led_data_t led_data = {LED_ON, LED_MAX_BRIGHTNESS};
+    static led_data_t led_data = { LED_ON, LED_MAX_BRIGHTNESS };
 
     /* Get slider status */
     slider_touch_info = Cy_CapSense_GetTouchInfo(
-                            CY_CAPSENSE_LINEARSLIDER0_WDGT_ID, &cy_capsense_context);
+        CY_CAPSENSE_LINEARSLIDER0_WDGT_ID, &cy_capsense_context);
     slider_touch_status = slider_touch_info->numPosition;
     slider_pos = slider_touch_info->ptrPosition->x;
 
     /* Detect the new touch on slider */
     if ((RT_NULL != slider_touch_status) &&
-            (slider_pos != slider_pos_prev))
+        (slider_pos != slider_pos_prev))
     {
-        led_data.brightness = (slider_pos * 100)
-                              / cy_capsense_context.ptrWdConfig[CY_CAPSENSE_LINEARSLIDER0_WDGT_ID].xResolution;
+        led_data.brightness = (slider_pos * 100) / cy_capsense_context.ptrWdConfig[CY_CAPSENSE_LINEARSLIDER0_WDGT_ID].xResolution;
 
         led_update_req = true;
     }