[rtduino][lpc55s69] 修正RTduino框架下的引脚错误 (#6963)

1.修正RTduino框架下的引脚错误
2.Kconfig新增RTduino依赖项
3.README文档完善
4.上传LPC55s69兼容arduino部分引脚图

7 files changed, 113 insertions, 70 deletions

diff --git a/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_main.cpp b/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_main.cpp
index 07b2e47ee3..1323d585ab 100644
--- a/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_main.cpp
+++ b/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_main.cpp
@@ -6,27 +6,20 @@
  * Change Logs:
  * Date           Author       Notes
  * 2023-02-22     ChuShicheng  first version
+ * 2023-02-23     Wangyuqiang  second version
  */
 
 #include <Arduino.h>
 
-int led = 37; /* LED pin */
-int brightness = 0;
-int fadeAmount = 5;
-
-void setup()
+void setup(void)
 {
-    /* Do not invoke pinMode for the PWM IO! */
+    /* put your setup code here, to run once: */
+    Serial.begin();
 }
 
-void loop()
+void loop(void)
 {
-    analogWrite(led, brightness);
-    brightness = brightness + fadeAmount;
-    if (brightness <= 0 || brightness >= 255)
-    {
-        fadeAmount = -fadeAmount;
-    }
-
-    delay(100);
+    /* put your main code here, to run repeatedly: */
+    Serial.println("Hello Arduino!");
+    delay(800);
 }
diff --git a/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/LPC55s69-nxp-evk-pinout1.png b/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/LPC55s69-nxp-evk-pinout1.png
new file mode 100644
index 0000000000..1fb2f2b3b4
--- /dev/null
+++ b/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/LPC55s69-nxp-evk-pinout1.png
diff --git a/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/LPC55s69-nxp-evk-pinout2.png b/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/LPC55s69-nxp-evk-pinout2.png
new file mode 100644
index 0000000000..74c0117099
--- /dev/null
+++ b/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/LPC55s69-nxp-evk-pinout2.png
diff --git a/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/README.md b/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/README.md
index 70d59f9bd6..968594fc94 100644
--- a/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/README.md
+++ b/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/README.md
@@ -1,8 +1,8 @@
-# lpc55s69_nxp_evk开发板的Arduino生态兼容说明
+# LPC55s69-nxp-evk开发板的Arduino生态兼容说明
 
 ## 1 RTduino - RT-Thread的Arduino生态兼容层
 
-lpc55s69_nxp_evk开发板已经完整适配了[RTduino软件包](https://github.com/RTduino/RTduino)，即RT-Thread的Arduino生态兼容层。用户可以按照Arduino的编程习惯来操作该BSP，并且可以使用大量Arduino社区丰富的库，是对RT-Thread生态的极大增强。更多信息，请参见[RTduino软件包说明文档](https://github.com/RTduino/RTduino)。
+LPC55s69-nxp-evk开发板已经完整适配了[RTduino软件包](https://github.com/RTduino/RTduino)，即RT-Thread的Arduino生态兼容层。用户可以按照Arduino的编程习惯来操作该BSP，并且可以使用大量Arduino社区丰富的库，是对RT-Thread生态的极大增强。更多信息，请参见[RTduino软件包说明文档](https://github.com/RTduino/RTduino)。
 
 ### 1.1 如何开启针对本BSP的Arduino生态兼容层
 
@@ -18,27 +18,38 @@ Hardware Drivers Config --->
 
 更多引脚布局相关信息参见 [pins_arduino.c](pins_arduino.c) 和 [pins_arduino.h](pins_arduino.h)。
 
+![LPC55s69-nxp-evk-pinout1](LPC55s69-nxp-evk-pinout1.png)
+
+![LPC55s69-nxp-evk-pinout2](LPC55s69-nxp-evk-pinout2.png)
+
 | Arduino引脚编号  | STM32引脚编号 | 5V容忍 | 备注  |
 | ------------------- | --------- | ---- | ------------------------------------------------------------------------- |
-| 0 (D0) | P | 是/否 |  |
-| 1 (D1) | P | 是/否 | PWM1-CH3，默认被RT-Thread的PWM设备框架pwm1接管 |
-| 2 (D2) | P | 是/否 | Serial-RX，默认被RT-Thread的UART设备框架uart1接管 |
-| 3 (D3) | P | 是/否 | Serial-TX，默认被RT-Thread的UART设备框架uart1接管 |
-| 4 (D4) | P | 是/否 | PWM2-CH1，默认被RT-Thread的PWM设备框架pwm2接管 |
-| 5 (D5) | P | 是/否 | PWM2-CH2，默认被RT-Thread的PWM设备框架pwm2接管 |
-| 6 (D6) | P | 是/否 | 板载用户LED |
-| 7 (D7) | P | 是/否 | PWM1-CH0，默认被RT-Thread的PWM设备框架pwm1接管 |
-| 8 (D8) | P | 是/否 |  |
-| 9 (D9) | P | 是/否 | PWM2-CH0，默认被RT-Thread的PWM设备框架pwm2接管 |
-| 10 (D10) | P | 是/否 |  |
-| 11 (D11) | P | 是/否 |  |
-| 12 (D12) | P | 是/否 |  |
-| 13 (D13) | P | 是/否 |  |
-| 14 (D14) | P | 是/否 | PWM3-CH2，默认被RT-Thread的PWM设备框架pwm3接管 |
-| 15 (D15) | P | 是/否 |  |
-| 16 (D16) | P | 是/否 | I2C1-SCL，默认被RT-Thread的I2C设备框架i2c1接管 |
-| 17 (D17) | P | 是/否 | I2C1-SDA，默认被RT-Thread的I2C设备框架i2c1接管 |
-| 18 (A0) | P | 是/否 | ADC0-CH8，默认被RT-Thread的ADC设备框架adc0接管 |
-| 19 (A1) | P | 是/否 | ADC0-CH0，默认被RT-Thread的ADC设备框架adc0接管 |
-| 20 (A2) | -- |  | 芯片内部温度 ADC，默认被RT-Thread的ADC设备框架adc1接管 |
-| 21 (A3) | -- |  | 芯片内部参考电压 ADC，默认被RT-Thread的ADC设备框架adc1接管 |
+| 0 (D0) | P(1,24) | 是/否 | Serial2-RX，默认被RT-Thread的UART设备框架uart1接管 |
+| 1 (D1) | P(0,27) | 是/否 | Serial2-TX，默认被RT-Thread的UART设备框架uart1接管 |
+| 2 (D2) | P(0,15) | 是/否 |  |
+| 3 (D3) | P(1,6) | 是/否 |  |
+| 4 (D4) | P(1,7) | 是/否 | PWM2-CH2，默认被RT-Thread的PWM设备框架pwm2接管 |
+| 5 (D5) | P(1,4) | 是/否 | PWM2-CH1，默认被RT-Thread的PWM设备框架pwm2接管 |
+| 6 (D6) | P(1,10) | 是/否 |  |
+| 7 (D7) | P(1,9) | 是/否 | PWM1-CH0，默认被RT-Thread的PWM设备框架pwm1接管 |
+| 8 (D8) | P(1,8) | 是/否 |  |
+| 9 (D9) | P(1,5) | 是/否 |  |
+| 10 (D10) | P(1,1) | 是/否 |  |
+| 11 (D11) | P(0,26) | 是/否 |  |
+| 12 (D12) | P(1,3) | 是/否 | PWM0-CH3，默认被RT-Thread的PWM设备框架pwm0接管 |
+| 13 (D13) | P(1,2) | 是/否 |  |
+| 14 (D14) | P(1,21) | 是/否 | I2C4-SDA，默认被RT-Thread的I2C设备框架i2c4接管 |
+| 15 (D15) | P(1,20) | 是/否 | I2C4-SCL，默认被RT-Thread的I2C设备框架i2c4接管 |
+| 16 (A0) | P(0,16) | 是/否 | ADC0-CH8，默认被RT-Thread的ADC设备框架adc0接管 |
+| 17 (A1) | P(0,23) | 是/否 | ADC0-CH0，默认被RT-Thread的ADC设备框架adc0接管 |
+| 18 (A2) | -- | 是/否 |  |
+| 19 (A3) | P(1,31) | 是/否 |  |
+| 20 (A4) | P(0,13) | 是/否 | I2C1-SDA，默认被RT-Thread的I2C设备框架i2c1接管 |
+| 21 (A5) | P(1,14) | 是/否 | I2C1-SCL，默认被RT-Thread的I2C设备框架i2c1接管 |
+| 22 (A6) | -- |  | 芯片内部参考电压 ADC，默认被RT-Thread的ADC设备框架adc1接管 |
+| 23 (A7) | -- |  | 芯片内部温度 ADC，默认被RT-Thread的ADC设备框架adc1接管 |
+
+> 注意：
+>
+> 1. xxxxxxxxx
+> 2. xxxxxxxxx
diff --git a/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/pins_arduino.c b/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/pins_arduino.c
index de36abb335..ef62017fe5 100644
--- a/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/pins_arduino.c
+++ b/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/pins_arduino.c
@@ -6,6 +6,7 @@
  * Change Logs:
  * Date           Author       Notes
  * 2023-02-22     ChuShicheng  first version
+ * 2023-02-23     Wangyuqiang  second version
  */
 
 #include <Arduino.h>
@@ -21,26 +22,28 @@
  */
 const pin_map_t pin_map_table[]=
 {
-    {D0, 50},
-    {D1, 49, "pwm1", 3},                /* PWM */
-    {D2, 57, "uart1"},                  /* Serial-RX */
-    {D3, 28, "uart1"},                  /* Serial-TX */
-    {D4, 39, "pwm2", 1},                /* PWM */
-    {D5, 40, "pwm2", 2},                /* PWM */
-    {D6, 37},                           /* LED_BUILTIN */
-    {D7, 43, "pwm1", 0},                /* PWM */
-    {D8, 41},
-    {D9, 38, "pwm2", 0},                /* PWM */
-    {D10, 34},
-    {D11, 27},
-    {D12, 36},
-    {D13, 35},
-    {D14, 54, "pwm3", 2},               /* PWM */
-    {D15, 53},
-    {D16, 15, "i2c1"},                  /* I2C-SCL (Wire) */
-    {D17, 14, "i2c1"},                  /* I2C-SDA (Wire) */
-    {A0, 17, "adc0", 8},                /* ADC */
-    {A1, 24, "adc0", 0},                /* ADC */
-    {A2, RT_NULL, "adc0", 26},          /* ADC, On-Chip: internal temperature sensor, ADC_CHANNEL_TEMPSENSOR */
-    {A3, RT_NULL, "adc0", 13},          /* ADC, On-Chip: internal reference voltage, ADC_CHANNEL_VREFINT */
+    {D0, GET_PINS(1,24), "uart1"},      /* Serial2-RX */
+    {D1, GET_PINS(0,27), "uart1"},      /* Serial2-TX */
+    {D2, GET_PINS(0,15)},
+    {D3, GET_PINS(1,6)},
+    {D4, GET_PINS(1,7), "pwm2", 2},     /* PWM */
+    {D5, GET_PINS(1,4), "pwm2", 1},     /* PWM */
+    {D6, GET_PINS(1,10)},
+    {D7, GET_PINS(1,9), "pwm1", 0},     /* PWM */
+    {D8, GET_PINS(1,8)},
+    {D9, GET_PINS(1,5)},
+    {D10, GET_PINS(1,1)},
+    {D11, GET_PINS(0,26)},
+    {D12, GET_PINS(1,3), "pwm0", 3},    /* PWM */
+    {D13, GET_PINS(1,2)},
+    {D14, GET_PINS(1,21), "i2c4"},      /* I2C-SDA (Wire) */
+    {D15, GET_PINS(1,20), "i2c4"},      /* I2C-SCL (Wire) */
+    {A0, GET_PINS(0,16), "adc0", 8},    /* ADC */
+    {A1, GET_PINS(0,23), "adc0", 0},    /* ADC */
+    {A2, RT_NULL},
+    {A3, GET_PINS(1,31)},
+    {A4, GET_PINS(0,13), "i2c1"},       /* I2C-SDA (Wire) */
+    {A5, GET_PINS(1,14), "i2c1"},       /* I2C-SCL (Wire) */
+    {A6, RT_NULL, "adc0", 13},          /* ADC, On-Chip: internal reference voltage, ADC_CHANNEL_VREFINT */
+    {A7, RT_NULL, "adc0", 26},          /* ADC, On-Chip: internal temperature sensor, ADC_CHANNEL_TEMPSENSOR */
 };
diff --git a/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/pins_arduino.h b/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/pins_arduino.h
index b7e61f7461..b5487c5426 100644
--- a/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/pins_arduino.h
+++ b/bsp/lpc55sxx/lpc55s69_nxp_evk/applications/arduino_pinout/pins_arduino.h
@@ -6,6 +6,7 @@
  * Change Logs:
  * Date           Author       Notes
  * 2023-02-22     ChuShicheng  first version
+ * 2023-02-23     Wangyuqiang  second version
  */
 
 #ifndef Pins_Arduino_h
@@ -28,18 +29,21 @@
 #define D13       (13)
 #define D14       (14)
 #define D15       (15)
-#define D16       (16)
-#define D17       (17)
-#define A0        (18)
-#define A1        (19)
-#define A2        (20)
-#define A3        (21)
+#define A0        (16)
+#define A1        (17)
+#define A2        (18)
+#define A3        (19)
+#define A4        (20)
+#define A5        (21)
+#define A6        (22)
+#define A7        (23)
 
 #define F_CPU          150000000L  /* CPU:150MHz */
 
-#define LED_BUILTIN     D6  /* Default Built-in LED */
-
-/* i2c1 : P-SDA P-SCL */
+/* i2c1 : P(,13-SDA P(,14-SCL */
 #define RTDUINO_DEFAULT_IIC_BUS_NAME    "i2c1"
 
+/* Serial2 : P(,27-TX  P(,24-RX */
+#define RTDUINO_SERIAL2_DEVICE_NAME      "uart1"
+
 #endif /* Pins_Arduino_h */
diff --git a/bsp/lpc55sxx/lpc55s69_nxp_evk/board/Kconfig b/bsp/lpc55sxx/lpc55s69_nxp_evk/board/Kconfig
index 041b90fee6..01f7c8ef98 100644
--- a/bsp/lpc55sxx/lpc55s69_nxp_evk/board/Kconfig
+++ b/bsp/lpc55sxx/lpc55s69_nxp_evk/board/Kconfig
@@ -42,6 +42,22 @@ menu "On-chip Peripheral Drivers"
                         endchoice
                     endif
 
+                config BSP_USING_UART1
+                    bool "Enable Flexcomm1 as UART"
+                    default n
+                    if BSP_USING_UART1
+                    choice
+                        prompt "Select UART2 badurate"
+                        default HW_UART1_BAUDRATE_115200
+
+                        config HW_UART1_BAUDRATE_9600
+                            bool "Badurate 9600"
+
+                        config HW_UART1_BAUDRATE_115200
+                            bool "Badurate 115200"
+                    endchoice
+                endif
+
                 config BSP_USING_UART2
                     bool "Enable Flexcomm2 as UART"
                     default n
@@ -70,6 +86,7 @@ menu "On-chip Peripheral Drivers"
                 config BSP_USING_I2C1
                     bool "Enable Flexcomm1 I2C"
                     default y
+
                     if BSP_USING_I2C1
                         choice
                             prompt "Select I2C1 badurate"
@@ -130,6 +147,21 @@ menu "On-chip Peripheral Drivers"
                 config BSP_USING_ADC0_CH1
                     bool "Enable ADC0 Channel1"
                     default n
+
+                config BSP_USING_ADC0_CH8
+                    bool "Enable ADC0 Channel8"
+                    default n
+
+        
+                config BSP_USING_ADC0_CH13
+                    bool "Enable ADC0 Channel13"
+                    default n
+
+
+                config BSP_USING_ADC0_CH26
+                    bool "Enable ADC0 Channel26"
+                    default n
+
             endif
 
     config BSP_USING_SDIO