[bsp/bl808] add: drv_i2c

6 files changed, 256 insertions, 3 deletions

diff --git a/bsp/bl808/README.md b/bsp/bl808/README.md
index 0007f508f3..9a609207ec 100644
--- a/bsp/bl808/README.md
+++ b/bsp/bl808/README.md
@@ -100,6 +100,7 @@ Windows下推荐使用[env工具][1]，在console下进入bsp/bl808目录中，�
 | ------ | ----  | :------:  |
 | UART | 支持 | UART0，用于shell，默认波特率2000000 |
 | GPIO | 支持 |  |
+| I2C | 支持 | 软件 I2C1，默认 SCL——20，SDA——21 |
 
 ## 5. 联系人信息
 
diff --git a/bsp/bl808/m0/drivers/Kconfig b/bsp/bl808/m0/drivers/Kconfig
index eca0033e7b..ac17b47215 100644
--- a/bsp/bl808/m0/drivers/Kconfig
+++ b/bsp/bl808/m0/drivers/Kconfig
@@ -18,6 +18,23 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_PIN
         default y
 
+    menuconfig BSP_USING_I2C1
+        bool "Enable I2C1 BUS (software simulation)"
+        default n
+        select RT_USING_I2C
+        select RT_USING_I2C_BITOPS
+        select RT_USING_PIN
+        if BSP_USING_I2C1
+            config BSP_I2C1_SCL_PIN
+                int "i2c1 scl pin number"
+                range 0 33
+                default 20
+            config BSP_I2C1_SDA_PIN
+                int "I2C1 sda pin number"
+                range 0 33
+                default 21
+        endif
+
     menuconfig BSP_USING_UART
         bool "Enable UART"
         default y
diff --git a/bsp/bl808/m0/drivers/SConscript b/bsp/bl808/m0/drivers/SConscript
index 503dd50f4c..3cd7a608dd 100644
--- a/bsp/bl808/m0/drivers/SConscript
+++ b/bsp/bl808/m0/drivers/SConscript
@@ -18,6 +18,9 @@ if GetDepend(['RT_USING_SERIAL']):
 if GetDepend('RT_USING_PIN'):
     src += ['drv_gpio.c']
 
+if GetDepend('RT_USING_I2C'):
+    src += ['drv_i2c.c']
+
 # if GetDepend('BSP_USING_LCD'):
 #     src += ['drv_lcd.c']
 #     src += ['drv_mpylcd.c']
@@ -28,9 +31,6 @@ if GetDepend('RT_USING_PIN'):
 # if GetDepend('RT_USING_CPUTIME'):
 #     src += ['drv_cputime.c']
 
-# if GetDepend('RT_USING_I2C'):
-#     src += ['drv_i2c.c']
-
 # if GetDepend('RT_USING_SPI'):
 #     src += ['drv_spi.c']
 
diff --git a/bsp/bl808/m0/drivers/board.c b/bsp/bl808/m0/drivers/board.c
index 525488eaec..a5c823ac8d 100644
--- a/bsp/bl808/m0/drivers/board.c
+++ b/bsp/bl808/m0/drivers/board.c
@@ -6,6 +6,7 @@
  * Change Logs:
  * Date           Author       Notes
  * 2022/12/25     flyingcys    first version
+ * 2023/01/17     chushicheng  add pin and i2c
  */
 #include <rthw.h>
 #include <rtthread.h>
@@ -81,6 +82,11 @@ void rt_hw_board_init(void)
     rt_hw_pin_init();
 #endif
 
+    /* I2C driver initialization is open by default */
+#ifdef RT_USING_I2C
+    rt_hw_i2c_init();
+#endif
+
     /* UART driver initialization is open by default */
 #ifdef RT_USING_SERIAL
     rt_hw_uart_init();
diff --git a/bsp/bl808/m0/drivers/drv_i2c.c b/bsp/bl808/m0/drivers/drv_i2c.c
new file mode 100644
index 0000000000..b69c6e623f
--- /dev/null
+++ b/bsp/bl808/m0/drivers/drv_i2c.c
@@ -0,0 +1,186 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2023/01/17     chushicheng  first version
+ */
+
+#include <board.h>
+#include "drv_i2c.h"
+#include "bl808_common.h"
+
+#ifdef RT_USING_I2C
+
+#define DBG_TAG              "drv.i2c"
+#define DBG_LVL               DBG_INFO
+#include <rtdbg.h>
+
+#if !defined(BSP_USING_I2C1)
+#error "Please define at least one BSP_USING_I2Cx"
+/* this driver can be disabled at menuconfig -> RT-Thread Components -> Device Drivers */
+#endif
+
+static const struct bl808_soft_i2c_config soft_i2c_config[] =
+{
+#ifdef BSP_USING_I2C1
+    I2C1_BUS_CONFIG,
+#endif
+};
+
+static struct bl808_i2c i2c_obj[sizeof(soft_i2c_config) / sizeof(soft_i2c_config[0])];
+
+/**
+ * This function initializes the i2c pin.
+ *
+ * @param bl808 i2c dirver class.
+ */
+static void bl808_i2c_gpio_init(struct bl808_i2c *i2c)
+{
+    struct bl808_soft_i2c_config* cfg = (struct bl808_soft_i2c_config*)i2c->ops.data;
+
+    rt_pin_mode(cfg->scl, PIN_MODE_OUTPUT_OD);
+    rt_pin_mode(cfg->sda, PIN_MODE_OUTPUT_OD);
+
+    rt_pin_write(cfg->scl, PIN_HIGH);
+    rt_pin_write(cfg->sda, PIN_HIGH);
+}
+
+/**
+ * This function sets the sda pin.
+ *
+ * @param bl808 config class.
+ * @param The sda pin state.
+ */
+static void bl808_set_sda(void *data, rt_int32_t state)
+{
+    struct bl808_soft_i2c_config* cfg = (struct bl808_soft_i2c_config*)data;
+    if (state)
+    {
+        rt_pin_write(cfg->sda, PIN_HIGH);
+    }
+    else
+    {
+        rt_pin_write(cfg->sda, PIN_LOW);
+    }
+}
+
+/**
+ * This function sets the scl pin.
+ *
+ * @param bl808 config class.
+ * @param The scl pin state.
+ */
+static void bl808_set_scl(void *data, rt_int32_t state)
+{
+    struct bl808_soft_i2c_config* cfg = (struct bl808_soft_i2c_config*)data;
+    if (state)
+    {
+        rt_pin_write(cfg->scl, PIN_HIGH);
+    }
+    else
+    {
+        rt_pin_write(cfg->scl, PIN_LOW);
+    }
+}
+
+/**
+ * This function gets the sda pin state.
+ *
+ * @param The sda pin state.
+ */
+static rt_int32_t bl808_get_sda(void *data)
+{
+    struct bl808_soft_i2c_config* cfg = (struct bl808_soft_i2c_config*)data;
+    return rt_pin_read(cfg->sda);
+}
+
+/**
+ * This function gets the scl pin state.
+ *
+ * @param The scl pin state.
+ */
+static rt_int32_t bl808_get_scl(void *data)
+{
+    struct bl808_soft_i2c_config* cfg = (struct bl808_soft_i2c_config*)data;
+    return rt_pin_read(cfg->scl);
+}
+/**
+ * The time delay function.
+ *
+ * @param microseconds.
+ */
+static void bl808_udelay(rt_uint32_t us)
+{
+    arch_delay_us(us);
+}
+
+static const struct rt_i2c_bit_ops bl808_bit_ops_default =
+{
+    .data     = RT_NULL,
+    .set_sda  = bl808_set_sda,
+    .set_scl  = bl808_set_scl,
+    .get_sda  = bl808_get_sda,
+    .get_scl  = bl808_get_scl,
+    .udelay   = bl808_udelay,
+    .delay_us = 1,
+    .timeout  = 100
+};
+
+/**
+ * if i2c is locked, this function will unlock it
+ *
+ * @param bl808 config class
+ *
+ * @return RT_EOK indicates successful unlock.
+ */
+static rt_err_t bl808_i2c_bus_unlock(const struct bl808_soft_i2c_config *cfg)
+{
+    rt_int32_t i = 0;
+
+    if (PIN_LOW == rt_pin_read(cfg->sda))
+    {
+        while (i++ < 9)
+        {
+            rt_pin_write(cfg->scl, PIN_HIGH);
+            bl808_udelay(100);
+            rt_pin_write(cfg->scl, PIN_LOW);
+            bl808_udelay(100);
+        }
+    }
+    if (PIN_LOW == rt_pin_read(cfg->sda))
+    {
+        return -RT_ERROR;
+    }
+
+    return RT_EOK;
+}
+
+/* I2C initialization function */
+int rt_hw_i2c_init(void)
+{
+    rt_err_t result;
+
+    for (rt_size_t i = 0; i < sizeof(i2c_obj) / sizeof(struct bl808_i2c); i++)
+    {
+        i2c_obj[i].ops = bl808_bit_ops_default;
+        i2c_obj[i].ops.data = (void*)&soft_i2c_config[i];
+        i2c_obj[i].i2c2_bus.priv = &i2c_obj[i].ops;
+        bl808_i2c_gpio_init(&i2c_obj[i]);
+        result = rt_i2c_bit_add_bus(&i2c_obj[i].i2c2_bus, soft_i2c_config[i].bus_name);
+        RT_ASSERT(result == RT_EOK);
+        bl808_i2c_bus_unlock(&soft_i2c_config[i]);
+
+        LOG_D("software simulation %s init done, pin scl: %d, pin sda %d",
+        soft_i2c_config[i].bus_name,
+        soft_i2c_config[i].scl,
+        soft_i2c_config[i].sda);
+    }
+
+    return RT_EOK;
+}
+INIT_BOARD_EXPORT(rt_hw_i2c_init);
+
+#endif /* RT_USING_I2C */
diff --git a/bsp/bl808/m0/drivers/drv_i2c.h b/bsp/bl808/m0/drivers/drv_i2c.h
new file mode 100644
index 0000000000..4add722a00
--- /dev/null
+++ b/bsp/bl808/m0/drivers/drv_i2c.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2023/01/17     chushicheng  first version
+ */
+
+#ifndef __DRV_I2C__
+#define __DRV_I2C__
+
+#include <rtthread.h>
+#include <rthw.h>
+#include <rtdevice.h>
+
+/* bl808 config class */
+struct bl808_soft_i2c_config
+{
+    rt_uint8_t scl;
+    rt_uint8_t sda;
+    const char *bus_name;
+};
+/* bl808 i2c dirver class */
+struct bl808_i2c
+{
+    struct rt_i2c_bit_ops ops;
+    struct rt_i2c_bus_device i2c2_bus;
+};
+
+#ifdef BSP_USING_I2C1
+#define I2C1_BUS_CONFIG                                  \
+    {                                                    \
+        .scl = BSP_I2C1_SCL_PIN,                         \
+        .sda = BSP_I2C1_SDA_PIN,                         \
+        .bus_name = "i2c1",                              \
+    }
+#endif
+
+int rt_hw_i2c_init(void);
+
+#endif