diff options
| author | Meco Man <[email protected]> | 2024-02-01 07:11:06 +0800 |
|---|---|---|
| committer | Rbb666 <[email protected]> | 2024-02-01 21:29:15 +0800 |
| commit | 74d7ca7dbde0b2f9c5c2f4f05c0daece5a458988 (patch) | |
| tree | f2684eb79eb688d17147040f92bafa5bc9103d8c | |
| parent | bfa2f7ca57680bf4912d12e7d3c30b058d53fe56 (diff) | |
[bsp][pico] add board/Kconfig
| -rw-r--r-- | bsp/raspberry-pico/Kconfig | 814 | ||||
| -rw-r--r-- | bsp/raspberry-pico/board/Kconfig | 809 |
2 files changed, 812 insertions, 811 deletions
diff --git a/bsp/raspberry-pico/Kconfig b/bsp/raspberry-pico/Kconfig index b254741c62..c441a0bdf2 100644 --- a/bsp/raspberry-pico/Kconfig +++ b/bsp/raspberry-pico/Kconfig @@ -15,11 +15,6 @@ config PKGS_DIR option env="PKGS_ROOT" default "packages" -source "$RTT_DIR/Kconfig" -source "$PKGS_DIR/Kconfig" - -menu "Hardware Drivers Config" - config SOC_RP2040 bool select ARCH_ARM_CORTEX_M0 @@ -29,809 +24,6 @@ config SOC_RP2040 select PKG_USING_RASPBERRYPI_PICO_SDK default y -menu "Onboard Peripheral Drivers" - - config BSP_USING_LVGL - bool "Enable LVGL for LCD" - select PKG_USING_LVGL - select BSP_USING_SPI_LCD - default n - - if BSP_USING_LVGL - config BSP_USING_LVGL_DEMO - bool "Enable LVGL demo" - select PKG_USING_LV_MUSIC_DEMO - default y - endif - - config BSP_USING_ARDUINO - bool "Compatible with Arduino Ecosystem (RTduino)" - select PKG_USING_RTDUINO - select BSP_USING_UART1 - select BSP_USING_GPIO - select BSP_USING_ADC - select BSP_USING_ADC0 - select BSP_USING_ADC1 - select BSP_USING_ADC2 - select BSP_USING_PWM - select BSP_USING_PWM0 - select BSP_USING_PWM1 - select BSP_USING_PWM2 - select BSP_USING_PWM3 - select BSP_USING_PWM4 - select BSP_USING_PWM5 - select BSP_USING_PWM6 - select BSP_USING_PWM7 - select BSP_USING_I2C - select BSP_USING_I2C0 - imply RTDUINO_USING_SERVO - default n - - config BSP_USING_ON_CHIP_FLASH - bool "Enable On-Chip FLASH" - select FAL_DEBUG_CONFIG - select FAL_PART_HAS_TABLE_CFG - default n -endmenu - -menu "On-chip Peripheral Drivers" - - config BSP_USING_PIN - bool "Enable GPIO" - select RT_USING_PIN - default y - - menuconfig BSP_USING_UART - bool "Enable UART" - select RT_USING_SERIAL - default y - if BSP_USING_UART - config BSP_USING_UART0 - bool "Enable UART0" - default y - if BSP_USING_UART0 - choice - prompt "uart0 tx pin number (GP)" - depends on BSP_USING_UART0 - default BSP_UART0_TX_PIN_0 - config BSP_UART0_TX_PIN_0 - bool "0" - config BSP_UART0_TX_PIN_12 - bool "12" - config BSP_UART0_TX_PIN_16 - bool "16" - endchoice - config BSP_UART0_TX_PIN - int - default 0 if BSP_UART0_TX_PIN_0 - default 12 if BSP_UART0_TX_PIN_12 - default 16 if BSP_UART0_TX_PIN_16 - - choice - prompt "uart0 rx pin number (GP)" - depends on BSP_USING_UART0 - default BSP_UART0_RX_PIN_1 - config BSP_UART0_RX_PIN_1 - bool "1" - config BSP_UART0_RX_PIN_13 - bool "13" - config BSP_UART0_RX_PIN_17 - bool "17" - endchoice - config BSP_UART0_RX_PIN - int - default 1 if BSP_UART0_RX_PIN_1 - default 13 if BSP_UART0_RX_PIN_13 - default 17 if BSP_UART0_RX_PIN_17 - endif - - config BSP_USING_UART1 - bool "Enable UART1" - default n - if BSP_USING_UART1 - choice - prompt "uart1 tx pin number (GP)" - depends on BSP_USING_UART1 - default BSP_UART1_TX_PIN_8 - config BSP_UART1_TX_PIN_4 - bool "4" - config BSP_UART1_TX_PIN_8 - bool "8" - endchoice - config BSP_UART1_TX_PIN - int - default 4 if BSP_UART1_TX_PIN_4 - default 8 if BSP_UART1_TX_PIN_8 - - choice - prompt "uart1 rx pin number (GP)" - depends on BSP_USING_UART1 - default BSP_UART1_RX_PIN_9 - config BSP_UART1_RX_PIN_5 - bool "5" - config BSP_UART1_RX_PIN_9 - bool "9" - endchoice - config BSP_UART1_RX_PIN - int - default 5 if BSP_UART1_RX_PIN_5 - default 9 if BSP_UART1_RX_PIN_9 - endif - endif - - menuconfig BSP_USING_SOFT_I2C - bool "Enable I2C BUS (software simulation)" - default n - select RT_USING_I2C - select RT_USING_I2C_BITOPS - select RT_USING_PIN - if BSP_USING_SOFT_I2C - config BSP_USING_SOFT_I2C1 - bool "Enable I2C1 Bus (software simulation)" - default n - if BSP_USING_SOFT_I2C1 - config BSP_SOFT_I2C1_SCL_PIN - int "i2c1 scl pin number (GP)" - range 0 28 - default 2 - config BSP_SOFT_I2C1_SDA_PIN - int "I2C1 sda pin number (GP)" - range 0 28 - default 3 - endif - endif - - menuconfig BSP_USING_SOFT_SPI - bool "Enable soft SPI BUS" - default n - select RT_USING_PIN - select RT_USING_SPI_BITOPS - select RT_USING_SPI - if BSP_USING_SOFT_SPI - config BSP_USING_SOFT_SPI0 - bool "Enable SPI0 Bus (software simulation)" - default n - if BSP_USING_SOFT_SPI0 - config BSP_S_SPI0_SCK_PIN - int "spi0 sck pin number (GP)" - range 0 28 - default 6 - config BSP_S_SPI0_MOSI_PIN - int "spi0 mosi pin number (GP)" - range 0 28 - default 7 - config BSP_S_SPI0_MISO_PIN - int "spi0 miso pin number (GP)" - range 0 28 - default 4 - endif - config BSP_USING_SOFT_SPI1 - bool "Enable SPI1 Bus (software simulation)" - default n - if BSP_USING_SOFT_SPI1 - config BSP_S_SPI1_SCK_PIN - int "spi1 sck pin number (GP)" - range 0 28 - default 10 - config BSP_S_SPI1_MOSI_PIN - int "spi1 mosi pin number (GP)" - range 0 28 - default 11 - config BSP_S_SPI1_MISO_PIN - int "spi1 miso pin number (GP)" - range 0 28 - default 12 - endif - endif - - menuconfig BSP_USING_ADC - bool "Enable ADC" - default n - select RT_USING_ADC - if BSP_USING_ADC - config BSP_USING_ADC0 - bool "Enable ADC0 (GP26)" - default n - config BSP_USING_ADC1 - bool "Enable ADC1 (GP27)" - default n - config BSP_USING_ADC2 - bool "Enable ADC2 (GP28)" - default n - endif - - config BSP_USING_WDT - bool "Enable WDT" - select RT_USING_WDT - default n - - - config BSP_USING_RTC - bool "Enable RTC" - select RT_USING_RTC - default n - - menuconfig BSP_USING_SPI - bool "Enable SPI" - select RT_USING_SPI - default n - - if BSP_USING_SPI - config BSP_USING_SPI0 - bool "Enable SPI0" - default n - if BSP_USING_SPI0 - choice - prompt "spi0 tx pin number (GP)" - depends on BSP_USING_SPI0 - default BSP_SPI0_TX_PIN_3 - config BSP_SPI0_TX_PIN_3 - bool "3" - config BSP_SPI0_TX_PIN_7 - bool "7" - config BSP_SPI0_TX_PIN_19 - bool "19" - endchoice - config BSP_SPI0_TX_PIN - int - default 3 if BSP_SPI0_TX_PIN_3 - default 7 if BSP_SPI0_TX_PIN_7 - default 19 if BSP_SPI0_TX_PIN_19 - - choice - prompt "spi0 rx pin number (GP)" - depends on BSP_USING_SPI0 - default BSP_SPI0_RX_PIN_4 - config BSP_SPI0_RX_PIN_0 - bool "0" - config BSP_SPI0_RX_PIN_4 - bool "4" - config BSP_SPI0_RX_PIN_16 - bool "16" - endchoice - config BSP_SPI0_RX_PIN - int - default 0 if BSP_SPI0_RX_PIN_0 - default 4 if BSP_SPI0_RX_PIN_4 - default 16 if BSP_SPI0_RX_PIN_16 - - choice - prompt "spi0 sck pin number (GP)" - depends on BSP_USING_SPI0 - default BSP_SPI0_SCK_PIN_2 - config BSP_SPI0_SCK_PIN_2 - bool "2" - config BSP_SPI0_SCK_PIN_6 - bool "6" - config BSP_SPI0_SCK_PIN_8 - bool "8" - endchoice - config BSP_SPI0_SCK_PIN - int - default 2 if BSP_SPI0_SCK_PIN_2 - default 6 if BSP_SPI0_SCK_PIN_6 - default 8 if BSP_SPI0_SCK_PIN_8 - - choice - prompt "spi0 cs pin number (GP)" - depends on BSP_USING_SPI0 - default BSP_SPI0_CS_PIN_5 - config BSP_SPI0_CS_PIN_1 - bool "1" - config BSP_SPI0_CS_PIN_5 - bool "5" - config BSP_SPI0_CS_PIN_17 - bool "17" - endchoice - config BSP_SPI0_CS_PIN - int - default 1 if BSP_SPI0_CS_PIN_1 - default 5 if BSP_SPI0_CS_PIN_5 - default 17 if BSP_SPI0_CS_PIN_17 - endif - - config BSP_USING_SPI1 - bool "Enable SPI1" - default n - if BSP_USING_SPI1 - choice - prompt "spi1 tx pin number (GP)" - depends on BSP_USING_SPI1 - default BSP_SPI1_TX_PIN_11 - config BSP_SPI1_TX_PIN_11 - bool "11" - config BSP_SPI1_TX_PIN_15 - bool "15" - endchoice - config BSP_SPI1_TX_PIN - int - default 11 if BSP_SPI1_TX_PIN_11 - default 15 if BSP_SPI1_TX_PIN_15 - - choice - prompt "spi1 rx pin number (GP)" - depends on BSP_USING_SPI1 - default BSP_SPI1_RX_PIN_12 - config BSP_SPI1_RX_PIN_8 - bool "8" - config BSP_SPI1_RX_PIN_12 - bool "12" - endchoice - config BSP_SPI1_RX_PIN - int - default 8 if BSP_SPI1_RX_PIN_8 - default 12 if BSP_SPI1_RX_PIN_12 - - choice - prompt "spi1 sck pin number (GP)" - depends on BSP_USING_SPI0 - default BSP_SPI1_SCK_PIN_10 - config BSP_SPI1_SCK_PIN_10 - bool "10" - config BSP_SPI1_SCK_PIN_14 - bool "14" - endchoice - config BSP_SPI1_SCK_PIN - int - default 10 if BSP_SPI1_SCK_PIN_10 - default 14 if BSP_SPI1_SCK_PIN_14 - - choice - prompt "spi1 cs pin number (GP)" - depends on BSP_USING_SPI0 - default BSP_SPI1_CS_PIN_13 - config BSP_SPI1_CS_PIN_9 - bool "9" - config BSP_SPI1_CS_PIN_13 - bool "13" - endchoice - config BSP_SPI1_CS_PIN - int - default 9 if BSP_SPI1_CS_PIN_9 - default 13 if BSP_SPI1_CS_PIN_13 - endif - endif - - menuconfig BSP_USING_PWM - bool "Enable PWM(A:CH_0 B:CH_1)" - default n - select RT_USING_PWM - if BSP_USING_PWM - config BSP_USING_PWM0 - bool "Enable PWM0" - default n - if BSP_USING_PWM0 - choice - prompt "pwm slice A pin number (GP)" - depends on BSP_USING_PWM0 - default BSP_PWM0_A_PIN_16 - config BSP_PWM0_A_PIN_0 - bool "0" - config BSP_PWM0_A_PIN_16 - bool "16" - endchoice - config BSP_PWM0_A_PIN - int - default 0 if BSP_PWM0_A_PIN_0 - default 16 if BSP_PWM0_A_PIN_16 - choice - prompt "pwm slice B pin number (GP)" - depends on BSP_USING_PWM0 - default BSP_PWM0_B_PIN_17 - config BSP_PWM0_B_PIN_1 - bool "1" - config BSP_PWM0_B_PIN_17 - bool "17" - endchoice - config BSP_PWM0_B_PIN - int - default 1 if BSP_PWM0_B_PIN_1 - default 17 if BSP_PWM0_B_PIN_17 - config BSP_PWM0_A_ALL - bool "pwm slice use all A pin" - default n - config BSP_PWM0_B_ALL - bool "pwm slice use all B pin" - default n - endif - - config BSP_USING_PWM1 - bool "Enable PWM1" - default n - if BSP_USING_PWM1 - choice - prompt "pwm slice A pin number (GP)" - depends on BSP_USING_PWM1 - default BSP_PWM1_A_PIN_18 - config BSP_PWM1_A_PIN_2 - bool "2" - config BSP_PWM1_A_PIN_18 - bool "18" - endchoice - config BSP_PWM1_A_PIN - int - default 2 if BSP_PWM1_A_PIN_2 - default 18 if BSP_PWM1_A_PIN_18 - choice - prompt "pwm slice B pin number (GP)" - depends on BSP_USING_PWM1 - default BSP_PWM1_B_PIN_19 - config BSP_PWM1_B_PIN_3 - bool "3" - config BSP_PWM1_B_PIN_19 - bool "19" - endchoice - config BSP_PWM1_B_PIN - int - default 3 if BSP_PWM1_B_PIN_3 - default 19 if BSP_PWM1_B_PIN_19 - config BSP_PWM1_A_ALL - bool "pwm slice use all A pin" - default n - config BSP_PWM1_B_ALL - bool "pwm slice use all B pin" - default n - endif - - config BSP_USING_PWM2 - bool "Enable PWM2" - default n - if BSP_USING_PWM2 - choice - prompt "pwm slice A pin number (GP)" - depends on BSP_USING_PWM2 - default BSP_PWM2_A_PIN_20 - config BSP_PWM2_A_PIN_4 - bool "4" - config BSP_PWM2_A_PIN_20 - bool "20" - endchoice - config BSP_PWM2_A_PIN - int - default 4 if BSP_PWM2_A_PIN_4 - default 20 if BSP_PWM2_A_PIN_20 - choice - prompt "pwm slice B pin number (GP)" - depends on BSP_USING_PWM2 - default BSP_PWM2_B_PIN_21 - config BSP_PWM2_B_PIN_5 - bool "5" - config BSP_PWM2_B_PIN_21 - bool "21" - endchoice - config BSP_PWM2_B_PIN - int - default 5 if BSP_PWM2_B_PIN_5 - default 21 if BSP_PWM2_B_PIN_21 - config BSP_PWM2_A_ALL - bool "pwm slice use all A pin" - default n - config BSP_PWM2_B_ALL - bool "pwm slice use all B pin" - default n - endif - - config BSP_USING_PWM3 - bool "Enable PWM3" - default n - if BSP_USING_PWM3 - choice - prompt "pwm slice A pin number (GP)" - depends on BSP_USING_PWM3 - default BSP_PWM3_A_PIN_22 - config BSP_PWM3_A_PIN_6 - bool "6" - config BSP_PWM3_A_PIN_22 - bool "22" - endchoice - config BSP_PWM3_A_PIN - int - default 6 if BSP_PWM3_A_PIN_6 - default 22 if BSP_PWM3_A_PIN_22 - choice - prompt "pwm slice B pin number (GP)" - depends on BSP_USING_PWM3 - default BSP_PWM3_B_PIN_23 - config BSP_PWM3_B_PIN_7 - bool "7" - config BSP_PWM3_B_PIN_23 - bool "23" - endchoice - config BSP_PWM3_B_PIN - int - default 7 if BSP_PWM3_B_PIN_7 - default 23 if BSP_PWM3_B_PIN_23 - config BSP_PWM3_A_ALL - bool "pwm slice use all A pin" - default n - config BSP_PWM3_B_ALL - bool "pwm slice use all B pin" - default n - endif - - config BSP_USING_PWM4 - bool "Enable PWM4" - default n - if BSP_USING_PWM4 - choice - prompt "pwm slice A pin number (GP)" - depends on BSP_USING_PWM4 - default BSP_PWM4_A_PIN_24 - config BSP_PWM4_A_PIN_8 - bool "8" - config BSP_PWM4_A_PIN_24 - bool "24" - endchoice - config BSP_PWM4_A_PIN - int - default 8 if BSP_PWM4_A_PIN_8 - default 24 if BSP_PWM4_A_PIN_24 - choice - prompt "pwm slice B pin number (GP)" - depends on BSP_USING_PWM4 - default BSP_PWM4_B_PIN_25 - config BSP_PWM4_B_PIN_9 - bool "9" - config BSP_PWM4_B_PIN_25 - bool "25" - endchoice - config BSP_PWM4_B_PIN - int - default 9 if BSP_PWM4_B_PIN_9 - default 25 if BSP_PWM4_B_PIN_25 - config BSP_PWM4_A_ALL - bool "pwm slice use all A pin" - default n - config BSP_PWM4_B_ALL - bool "pwm slice use all B pin" - default n - endif - - config BSP_USING_PWM5 - bool "Enable PWM5" - default n - if BSP_USING_PWM5 - choice - prompt "pwm slice A pin number (GP)" - depends on BSP_USING_PWM5 - default BSP_PWM5_A_PIN_10 - config BSP_PWM5_A_PIN_10 - bool "10" - config BSP_PWM5_A_PIN_26 - bool "26" - endchoice - config BSP_PWM5_A_PIN - int - default 10 if BSP_PWM5_A_PIN_10 - default 26 if BSP_PWM5_A_PIN_26 - choice - prompt "pwm slice B pin number (GP)" - depends on BSP_USING_PWM5 - default BSP_PWM5_B_PIN_11 - config BSP_PWM5_B_PIN_11 - bool "11" - config BSP_PWM5_B_PIN_27 - bool "27" - endchoice - config BSP_PWM5_B_PIN - int - default 11 if BSP_PWM5_B_PIN_11 - default 27 if BSP_PWM5_B_PIN_27 - config BSP_PWM5_A_ALL - bool "pwm slice use all A pin" - default n - config BSP_PWM5_B_ALL - bool "pwm slice use all B pin" - default n - endif - - config BSP_USING_PWM6 - bool "Enable PWM6" - default n - if BSP_USING_PWM6 - choice - prompt "pwm slice A pin number (GP)" - depends on BSP_USING_PWM6 - default BSP_PWM6_A_PIN_12 - config BSP_PWM6_A_PIN_12 - bool "12" - config BSP_PWM6_A_PIN_28 - bool "28" - endchoice - config BSP_PWM6_A_PIN - int - default 12 if BSP_PWM6_A_PIN_12 - default 28 if BSP_PWM6_A_PIN_28 - choice - prompt "pwm slice B pin number (GP)" - depends on BSP_USING_PWM6 - default BSP_PWM6_B_PIN_13 - config BSP_PWM6_B_PIN_13 - bool "13" - config BSP_PWM6_B_PIN_29 - bool "29" - endchoice - config BSP_PWM6_B_PIN - int - default 13 if BSP_PWM6_B_PIN_13 - default 29 if BSP_PWM6_B_PIN_29 - config BSP_PWM6_A_ALL - bool "pwm slice use all A pin" - default n - config BSP_PWM6_B_ALL - bool "pwm slice use all B pin" - default n - endif - - config BSP_USING_PWM7 - bool "Enable PWM7" - default n - if BSP_USING_PWM7 - choice - prompt "pwm slice A pin number (GP)" - depends on BSP_USING_PWM7 - default BSP_PWM7_A_PIN_14 - config BSP_PWM7_A_PIN_14 - bool "14" - endchoice - config BSP_PWM7_A_PIN - int - default 14 if BSP_PWM7_A_PIN_14 - choice - prompt "pwm slice B pin number (GP)" - depends on BSP_USING_PWM7 - default BSP_PWM7_B_PIN_15 - config BSP_PWM7_B_PIN_15 - bool "15" - endchoice - config BSP_PWM7_B_PIN - int - default 15 if BSP_PWM7_B_PIN_15 - endif - endif - - menuconfig BSP_USING_HWTIMER - bool "Enable HWTIMER" - default n - select RT_USING_HWTIMER - if BSP_USING_HWTIMER - config BSP_USING_TIMER0 - bool "Enable HWTIMER0" - default n - - config BSP_USING_TIMER1 - bool "Enable HWTIMER1" - default n - - config BSP_USING_TIMER2 - bool "Enable HWTIMER2" - default n - - config BSP_USING_TIMER3 - bool "Enable HWTIMER3" - default n - endif - - menuconfig BSP_USING_I2C - bool "Enable I2C" - select RT_USING_I2C - select RT_USING_I2C_BITOPS - select RT_USING_PIN - default n - - if BSP_USING_I2C - config BSP_USING_I2C0 - bool "Enable I2C0" - default n - if BSP_USING_I2C0 - choice - prompt "i2c0 scl pin number (GP)" - depends on BSP_USING_I2C0 - default BSP_I2C0_SCL_PIN_21 - config BSP_I2C0_SCL_PIN_1 - bool "1" - config BSP_I2C0_SCL_PIN_5 - bool "5" - config BSP_I2C0_SCL_PIN_9 - bool "9" - config BSP_I2C0_SCL_PIN_13 - bool "13" - config BSP_I2C0_SCL_PIN_17 - bool "17" - config BSP_I2C0_SCL_PIN_21 - bool "21" - endchoice - config BSP_I2C0_SCL_PIN - int - default 1 if BSP_I2C0_SCL_PIN_1 - default 5 if BSP_I2C0_SCL_PIN_5 - default 9 if BSP_I2C0_SCL_PIN_9 - default 13 if BSP_I2C0_SCL_PIN_13 - default 17 if BSP_I2C0_SCL_PIN_17 - default 21 if BSP_I2C0_SCL_PIN_21 - - choice - prompt "i2c0 sda pin number (GP)" - depends on BSP_USING_I2C0 - default BSP_I2C0_SDA_PIN_20 - config BSP_I2C0_SDA_PIN_0 - bool "0" - config BSP_I2C0_SDA_PIN_4 - bool "4" - config BSP_I2C0_SDA_PIN_8 - bool "8" - config BSP_I2C0_SDA_PIN_12 - bool "12" - config BSP_I2C0_SDA_PIN_16 - bool "16" - config BSP_I2C0_SDA_PIN_20 - bool "20" - endchoice - config BSP_I2C0_SDA_PIN - int - default 0 if BSP_I2C0_SDA_PIN_0 - default 4 if BSP_I2C0_SDA_PIN_4 - default 8 if BSP_I2C0_SDA_PIN_8 - default 12 if BSP_I2C0_SDA_PIN_12 - default 16 if BSP_I2C0_SDA_PIN_16 - default 20 if BSP_I2C0_SDA_PIN_20 - endif - - config BSP_USING_I2C1 - bool "Enable I2C1" - default n - if BSP_USING_I2C1 - choice - prompt "i2c1 scl pin number (GP)" - depends on BSP_USING_I2C1 - config BSP_I2C1_SCL_PIN_3 - bool "3" - config BSP_I2C1_SCL_PIN_7 - bool "7" - config BSP_I2C1_SCL_PIN_11 - bool "11" - config BSP_I2C1_SCL_PIN_15 - bool "15" - config BSP_I2C1_SCL_PIN_19 - bool "19" - config BSP_I2C1_SCL_PIN_27 - bool "27" - endchoice - config BSP_I2C1_SCL_PIN - int - default 3 if BSP_I2C1_SCL_PIN_3 - default 7 if BSP_I2C1_SCL_PIN_7 - default 11 if BSP_I2C1_SCL_PIN_11 - default 15 if BSP_I2C1_SCL_PIN_15 - default 19 if BSP_I2C1_SCL_PIN_19 - default 27 if BSP_I2C1_SCL_PIN_27 - - choice - prompt "i2c1 sda pin number (GP)" - depends on BSP_USING_I2C1 - config BSP_I2C1_SDA_PIN_2 - bool "2" - config BSP_I2C1_SDA_PIN_6 - bool "6" - config BSP_I2C1_SDA_PIN_10 - bool "10" - config BSP_I2C1_SDA_PIN_14 - bool "14" - config BSP_I2C1_SDA_PIN_18 - bool "18" - config BSP_I2C1_SDA_PIN_26 - bool "26" - endchoice - config BSP_I2C1_SDA_PIN - int - default 2 if BSP_I2C1_SDA_PIN_2 - default 6 if BSP_I2C1_SDA_PIN_6 - default 10 if BSP_I2C1_SDA_PIN_10 - default 14 if BSP_I2C1_SDA_PIN_14 - default 18 if BSP_I2C1_SDA_PIN_18 - default 26 if BSP_I2C1_SDA_PIN_26 - endif - endif -endmenu - -endmenu +source "$RTT_DIR/Kconfig" +source "$PKGS_DIR/Kconfig" +source "board/Kconfig" diff --git a/bsp/raspberry-pico/board/Kconfig b/bsp/raspberry-pico/board/Kconfig new file mode 100644 index 0000000000..53dac12035 --- /dev/null +++ b/bsp/raspberry-pico/board/Kconfig @@ -0,0 +1,809 @@ +menu "Hardware Drivers Config" + +menu "Onboard Peripheral Drivers" + + config BSP_USING_ARDUINO + bool "Compatible with Arduino Ecosystem (RTduino)" + select PKG_USING_RTDUINO + select BSP_USING_UART1 + select BSP_USING_GPIO + select BSP_USING_ADC + select BSP_USING_ADC0 + select BSP_USING_ADC1 + select BSP_USING_ADC2 + select BSP_USING_PWM + select BSP_USING_PWM0 + select BSP_USING_PWM1 + select BSP_USING_PWM2 + select BSP_USING_PWM3 + select BSP_USING_PWM4 + select BSP_USING_PWM5 + select BSP_USING_PWM6 + select BSP_USING_PWM7 + select BSP_USING_I2C + select BSP_USING_I2C0 + imply RTDUINO_USING_SERVO + default n + + config BSP_USING_LVGL + bool "Enable LVGL for LCD" + select PKG_USING_LVGL + select BSP_USING_SPI_LCD + default n + + config BSP_USING_LVGL_DEMO + depends on BSP_USING_LVGL + bool "Enable LVGL demo" + select PKG_USING_LV_MUSIC_DEMO + default y + +endmenu + +menu "On-chip Peripheral Drivers" + + config BSP_USING_PIN + bool "Enable GPIO" + select RT_USING_PIN + default y + + menuconfig BSP_USING_UART + bool "Enable UART" + select RT_USING_SERIAL + default y + if BSP_USING_UART + config BSP_USING_UART0 + bool "Enable UART0" + default y + if BSP_USING_UART0 + choice + prompt "uart0 tx pin number (GP)" + depends on BSP_USING_UART0 + default BSP_UART0_TX_PIN_0 + config BSP_UART0_TX_PIN_0 + bool "0" + config BSP_UART0_TX_PIN_12 + bool "12" + config BSP_UART0_TX_PIN_16 + bool "16" + endchoice + config BSP_UART0_TX_PIN + int + default 0 if BSP_UART0_TX_PIN_0 + default 12 if BSP_UART0_TX_PIN_12 + default 16 if BSP_UART0_TX_PIN_16 + + choice + prompt "uart0 rx pin number (GP)" + depends on BSP_USING_UART0 + default BSP_UART0_RX_PIN_1 + config BSP_UART0_RX_PIN_1 + bool "1" + config BSP_UART0_RX_PIN_13 + bool "13" + config BSP_UART0_RX_PIN_17 + bool "17" + endchoice + config BSP_UART0_RX_PIN + int + default 1 if BSP_UART0_RX_PIN_1 + default 13 if BSP_UART0_RX_PIN_13 + default 17 if BSP_UART0_RX_PIN_17 + endif + + config BSP_USING_UART1 + bool "Enable UART1" + default n + if BSP_USING_UART1 + choice + prompt "uart1 tx pin number (GP)" + depends on BSP_USING_UART1 + default BSP_UART1_TX_PIN_8 + config BSP_UART1_TX_PIN_4 + bool "4" + config BSP_UART1_TX_PIN_8 + bool "8" + endchoice + config BSP_UART1_TX_PIN + int + default 4 if BSP_UART1_TX_PIN_4 + default 8 if BSP_UART1_TX_PIN_8 + + choice + prompt "uart1 rx pin number (GP)" + depends on BSP_USING_UART1 + default BSP_UART1_RX_PIN_9 + config BSP_UART1_RX_PIN_5 + bool "5" + config BSP_UART1_RX_PIN_9 + bool "9" + endchoice + config BSP_UART1_RX_PIN + int + default 5 if BSP_UART1_RX_PIN_5 + default 9 if BSP_UART1_RX_PIN_9 + endif + endif + + menuconfig BSP_USING_SOFT_I2C + bool "Enable I2C BUS (software simulation)" + default n + select RT_USING_I2C + select RT_USING_I2C_BITOPS + select RT_USING_PIN + if BSP_USING_SOFT_I2C + config BSP_USING_SOFT_I2C1 + bool "Enable I2C1 Bus (software simulation)" + default n + if BSP_USING_SOFT_I2C1 + config BSP_SOFT_I2C1_SCL_PIN + int "i2c1 scl pin number (GP)" + range 0 28 + default 2 + config BSP_SOFT_I2C1_SDA_PIN + int "I2C1 sda pin number (GP)" + range 0 28 + default 3 + endif + endif + + menuconfig BSP_USING_SOFT_SPI + bool "Enable soft SPI BUS" + default n + select RT_USING_PIN + select RT_USING_SPI_BITOPS + select RT_USING_SPI + if BSP_USING_SOFT_SPI + config BSP_USING_SOFT_SPI0 + bool "Enable SPI0 Bus (software simulation)" + default n + if BSP_USING_SOFT_SPI0 + config BSP_S_SPI0_SCK_PIN + int "spi0 sck pin number (GP)" + range 0 28 + default 6 + config BSP_S_SPI0_MOSI_PIN + int "spi0 mosi pin number (GP)" + range 0 28 + default 7 + config BSP_S_SPI0_MISO_PIN + int "spi0 miso pin number (GP)" + range 0 28 + default 4 + endif + config BSP_USING_SOFT_SPI1 + bool "Enable SPI1 Bus (software simulation)" + default n + if BSP_USING_SOFT_SPI1 + config BSP_S_SPI1_SCK_PIN + int "spi1 sck pin number (GP)" + range 0 28 + default 10 + config BSP_S_SPI1_MOSI_PIN + int "spi1 mosi pin number (GP)" + range 0 28 + default 11 + config BSP_S_SPI1_MISO_PIN + int "spi1 miso pin number (GP)" + range 0 28 + default 12 + endif + endif + + menuconfig BSP_USING_ADC + bool "Enable ADC" + default n + select RT_USING_ADC + if BSP_USING_ADC + config BSP_USING_ADC0 + bool "Enable ADC0 (GP26)" + default n + config BSP_USING_ADC1 + bool "Enable ADC1 (GP27)" + default n + config BSP_USING_ADC2 + bool "Enable ADC2 (GP28)" + default n + endif + + config BSP_USING_WDT + bool "Enable WDT" + select RT_USING_WDT + default n + + + config BSP_USING_RTC + bool "Enable RTC" + select RT_USING_RTC + default n + + menuconfig BSP_USING_SPI + bool "Enable SPI" + select RT_USING_SPI + default n + + if BSP_USING_SPI + config BSP_USING_SPI0 + bool "Enable SPI0" + default n + if BSP_USING_SPI0 + choice + prompt "spi0 tx pin number (GP)" + depends on BSP_USING_SPI0 + default BSP_SPI0_TX_PIN_3 + config BSP_SPI0_TX_PIN_3 + bool "3" + config BSP_SPI0_TX_PIN_7 + bool "7" + config BSP_SPI0_TX_PIN_19 + bool "19" + endchoice + config BSP_SPI0_TX_PIN + int + default 3 if BSP_SPI0_TX_PIN_3 + default 7 if BSP_SPI0_TX_PIN_7 + default 19 if BSP_SPI0_TX_PIN_19 + + choice + prompt "spi0 rx pin number (GP)" + depends on BSP_USING_SPI0 + default BSP_SPI0_RX_PIN_4 + config BSP_SPI0_RX_PIN_0 + bool "0" + config BSP_SPI0_RX_PIN_4 + bool "4" + config BSP_SPI0_RX_PIN_16 + bool "16" + endchoice + config BSP_SPI0_RX_PIN + int + default 0 if BSP_SPI0_RX_PIN_0 + default 4 if BSP_SPI0_RX_PIN_4 + default 16 if BSP_SPI0_RX_PIN_16 + + choice + prompt "spi0 sck pin number (GP)" + depends on BSP_USING_SPI0 + default BSP_SPI0_SCK_PIN_2 + config BSP_SPI0_SCK_PIN_2 + bool "2" + config BSP_SPI0_SCK_PIN_6 + bool "6" + config BSP_SPI0_SCK_PIN_8 + bool "8" + endchoice + config BSP_SPI0_SCK_PIN + int + default 2 if BSP_SPI0_SCK_PIN_2 + default 6 if BSP_SPI0_SCK_PIN_6 + default 8 if BSP_SPI0_SCK_PIN_8 + + choice + prompt "spi0 cs pin number (GP)" + depends on BSP_USING_SPI0 + default BSP_SPI0_CS_PIN_5 + config BSP_SPI0_CS_PIN_1 + bool "1" + config BSP_SPI0_CS_PIN_5 + bool "5" + config BSP_SPI0_CS_PIN_17 + bool "17" + endchoice + config BSP_SPI0_CS_PIN + int + default 1 if BSP_SPI0_CS_PIN_1 + default 5 if BSP_SPI0_CS_PIN_5 + default 17 if BSP_SPI0_CS_PIN_17 + endif + + config BSP_USING_SPI1 + bool "Enable SPI1" + default n + if BSP_USING_SPI1 + choice + prompt "spi1 tx pin number (GP)" + depends on BSP_USING_SPI1 + default BSP_SPI1_TX_PIN_11 + config BSP_SPI1_TX_PIN_11 + bool "11" + config BSP_SPI1_TX_PIN_15 + bool "15" + endchoice + config BSP_SPI1_TX_PIN + int + default 11 if BSP_SPI1_TX_PIN_11 + default 15 if BSP_SPI1_TX_PIN_15 + + choice + prompt "spi1 rx pin number (GP)" + depends on BSP_USING_SPI1 + default BSP_SPI1_RX_PIN_12 + config BSP_SPI1_RX_PIN_8 + bool "8" + config BSP_SPI1_RX_PIN_12 + bool "12" + endchoice + config BSP_SPI1_RX_PIN + int + default 8 if BSP_SPI1_RX_PIN_8 + default 12 if BSP_SPI1_RX_PIN_12 + + choice + prompt "spi1 sck pin number (GP)" + depends on BSP_USING_SPI0 + default BSP_SPI1_SCK_PIN_10 + config BSP_SPI1_SCK_PIN_10 + bool "10" + config BSP_SPI1_SCK_PIN_14 + bool "14" + endchoice + config BSP_SPI1_SCK_PIN + int + default 10 if BSP_SPI1_SCK_PIN_10 + default 14 if BSP_SPI1_SCK_PIN_14 + + choice + prompt "spi1 cs pin number (GP)" + depends on BSP_USING_SPI0 + default BSP_SPI1_CS_PIN_13 + config BSP_SPI1_CS_PIN_9 + bool "9" + config BSP_SPI1_CS_PIN_13 + bool "13" + endchoice + config BSP_SPI1_CS_PIN + int + default 9 if BSP_SPI1_CS_PIN_9 + default 13 if BSP_SPI1_CS_PIN_13 + endif + endif + + menuconfig BSP_USING_PWM + bool "Enable PWM(A:CH_0 B:CH_1)" + default n + select RT_USING_PWM + if BSP_USING_PWM + config BSP_USING_PWM0 + bool "Enable PWM0" + default n + if BSP_USING_PWM0 + choice + prompt "pwm slice A pin number (GP)" + depends on BSP_USING_PWM0 + default BSP_PWM0_A_PIN_16 + config BSP_PWM0_A_PIN_0 + bool "0" + config BSP_PWM0_A_PIN_16 + bool "16" + endchoice + config BSP_PWM0_A_PIN + int + default 0 if BSP_PWM0_A_PIN_0 + default 16 if BSP_PWM0_A_PIN_16 + choice + prompt "pwm slice B pin number (GP)" + depends on BSP_USING_PWM0 + default BSP_PWM0_B_PIN_17 + config BSP_PWM0_B_PIN_1 + bool "1" + config BSP_PWM0_B_PIN_17 + bool "17" + endchoice + config BSP_PWM0_B_PIN + int + default 1 if BSP_PWM0_B_PIN_1 + default 17 if BSP_PWM0_B_PIN_17 + config BSP_PWM0_A_ALL + bool "pwm slice use all A pin" + default n + config BSP_PWM0_B_ALL + bool "pwm slice use all B pin" + default n + endif + + config BSP_USING_PWM1 + bool "Enable PWM1" + default n + if BSP_USING_PWM1 + choice + prompt "pwm slice A pin number (GP)" + depends on BSP_USING_PWM1 + default BSP_PWM1_A_PIN_18 + config BSP_PWM1_A_PIN_2 + bool "2" + config BSP_PWM1_A_PIN_18 + bool "18" + endchoice + config BSP_PWM1_A_PIN + int + default 2 if BSP_PWM1_A_PIN_2 + default 18 if BSP_PWM1_A_PIN_18 + choice + prompt "pwm slice B pin number (GP)" + depends on BSP_USING_PWM1 + default BSP_PWM1_B_PIN_19 + config BSP_PWM1_B_PIN_3 + bool "3" + config BSP_PWM1_B_PIN_19 + bool "19" + endchoice + config BSP_PWM1_B_PIN + int + default 3 if BSP_PWM1_B_PIN_3 + default 19 if BSP_PWM1_B_PIN_19 + config BSP_PWM1_A_ALL + bool "pwm slice use all A pin" + default n + config BSP_PWM1_B_ALL + bool "pwm slice use all B pin" + default n + endif + + config BSP_USING_PWM2 + bool "Enable PWM2" + default n + if BSP_USING_PWM2 + choice + prompt "pwm slice A pin number (GP)" + depends on BSP_USING_PWM2 + default BSP_PWM2_A_PIN_20 + config BSP_PWM2_A_PIN_4 + bool "4" + config BSP_PWM2_A_PIN_20 + bool "20" + endchoice + config BSP_PWM2_A_PIN + int + default 4 if BSP_PWM2_A_PIN_4 + default 20 if BSP_PWM2_A_PIN_20 + choice + prompt "pwm slice B pin number (GP)" + depends on BSP_USING_PWM2 + default BSP_PWM2_B_PIN_21 + config BSP_PWM2_B_PIN_5 + bool "5" + config BSP_PWM2_B_PIN_21 + bool "21" + endchoice + config BSP_PWM2_B_PIN + int + default 5 if BSP_PWM2_B_PIN_5 + default 21 if BSP_PWM2_B_PIN_21 + config BSP_PWM2_A_ALL + bool "pwm slice use all A pin" + default n + config BSP_PWM2_B_ALL + bool "pwm slice use all B pin" + default n + endif + + config BSP_USING_PWM3 + bool "Enable PWM3" + default n + if BSP_USING_PWM3 + choice + prompt "pwm slice A pin number (GP)" + depends on BSP_USING_PWM3 + default BSP_PWM3_A_PIN_22 + config BSP_PWM3_A_PIN_6 + bool "6" + config BSP_PWM3_A_PIN_22 + bool "22" + endchoice + config BSP_PWM3_A_PIN + int + default 6 if BSP_PWM3_A_PIN_6 + default 22 if BSP_PWM3_A_PIN_22 + choice + prompt "pwm slice B pin number (GP)" + depends on BSP_USING_PWM3 + default BSP_PWM3_B_PIN_23 + config BSP_PWM3_B_PIN_7 + bool "7" + config BSP_PWM3_B_PIN_23 + bool "23" + endchoice + config BSP_PWM3_B_PIN + int + default 7 if BSP_PWM3_B_PIN_7 + default 23 if BSP_PWM3_B_PIN_23 + config BSP_PWM3_A_ALL + bool "pwm slice use all A pin" + default n + config BSP_PWM3_B_ALL + bool "pwm slice use all B pin" + default n + endif + + config BSP_USING_PWM4 + bool "Enable PWM4" + default n + if BSP_USING_PWM4 + choice + prompt "pwm slice A pin number (GP)" + depends on BSP_USING_PWM4 + default BSP_PWM4_A_PIN_24 + config BSP_PWM4_A_PIN_8 + bool "8" + config BSP_PWM4_A_PIN_24 + bool "24" + endchoice + config BSP_PWM4_A_PIN + int + default 8 if BSP_PWM4_A_PIN_8 + default 24 if BSP_PWM4_A_PIN_24 + choice + prompt "pwm slice B pin number (GP)" + depends on BSP_USING_PWM4 + default BSP_PWM4_B_PIN_25 + config BSP_PWM4_B_PIN_9 + bool "9" + config BSP_PWM4_B_PIN_25 + bool "25" + endchoice + config BSP_PWM4_B_PIN + int + default 9 if BSP_PWM4_B_PIN_9 + default 25 if BSP_PWM4_B_PIN_25 + config BSP_PWM4_A_ALL + bool "pwm slice use all A pin" + default n + config BSP_PWM4_B_ALL + bool "pwm slice use all B pin" + default n + endif + + config BSP_USING_PWM5 + bool "Enable PWM5" + default n + if BSP_USING_PWM5 + choice + prompt "pwm slice A pin number (GP)" + depends on BSP_USING_PWM5 + default BSP_PWM5_A_PIN_10 + config BSP_PWM5_A_PIN_10 + bool "10" + config BSP_PWM5_A_PIN_26 + bool "26" + endchoice + config BSP_PWM5_A_PIN + int + default 10 if BSP_PWM5_A_PIN_10 + default 26 if BSP_PWM5_A_PIN_26 + choice + prompt "pwm slice B pin number (GP)" + depends on BSP_USING_PWM5 + default BSP_PWM5_B_PIN_11 + config BSP_PWM5_B_PIN_11 + bool "11" + config BSP_PWM5_B_PIN_27 + bool "27" + endchoice + config BSP_PWM5_B_PIN + int + default 11 if BSP_PWM5_B_PIN_11 + default 27 if BSP_PWM5_B_PIN_27 + config BSP_PWM5_A_ALL + bool "pwm slice use all A pin" + default n + config BSP_PWM5_B_ALL + bool "pwm slice use all B pin" + default n + endif + + config BSP_USING_PWM6 + bool "Enable PWM6" + default n + if BSP_USING_PWM6 + choice + prompt "pwm slice A pin number (GP)" + depends on BSP_USING_PWM6 + default BSP_PWM6_A_PIN_12 + config BSP_PWM6_A_PIN_12 + bool "12" + config BSP_PWM6_A_PIN_28 + bool "28" + endchoice + config BSP_PWM6_A_PIN + int + default 12 if BSP_PWM6_A_PIN_12 + default 28 if BSP_PWM6_A_PIN_28 + choice + prompt "pwm slice B pin number (GP)" + depends on BSP_USING_PWM6 + default BSP_PWM6_B_PIN_13 + config BSP_PWM6_B_PIN_13 + bool "13" + config BSP_PWM6_B_PIN_29 + bool "29" + endchoice + config BSP_PWM6_B_PIN + int + default 13 if BSP_PWM6_B_PIN_13 + default 29 if BSP_PWM6_B_PIN_29 + config BSP_PWM6_A_ALL + bool "pwm slice use all A pin" + default n + config BSP_PWM6_B_ALL + bool "pwm slice use all B pin" + default n + endif + + config BSP_USING_PWM7 + bool "Enable PWM7" + default n + if BSP_USING_PWM7 + choice + prompt "pwm slice A pin number (GP)" + depends on BSP_USING_PWM7 + default BSP_PWM7_A_PIN_14 + config BSP_PWM7_A_PIN_14 + bool "14" + endchoice + config BSP_PWM7_A_PIN + int + default 14 if BSP_PWM7_A_PIN_14 + choice + prompt "pwm slice B pin number (GP)" + depends on BSP_USING_PWM7 + default BSP_PWM7_B_PIN_15 + config BSP_PWM7_B_PIN_15 + bool "15" + endchoice + config BSP_PWM7_B_PIN + int + default 15 if BSP_PWM7_B_PIN_15 + endif + endif + + menuconfig BSP_USING_HWTIMER + bool "Enable HWTIMER" + default n + select RT_USING_HWTIMER + if BSP_USING_HWTIMER + config BSP_USING_TIMER0 + bool "Enable HWTIMER0" + default n + + config BSP_USING_TIMER1 + bool "Enable HWTIMER1" + default n + + config BSP_USING_TIMER2 + bool "Enable HWTIMER2" + default n + + config BSP_USING_TIMER3 + bool "Enable HWTIMER3" + default n + endif + + menuconfig BSP_USING_I2C + bool "Enable I2C" + select RT_USING_I2C + select RT_USING_I2C_BITOPS + select RT_USING_PIN + default n + + if BSP_USING_I2C + config BSP_USING_I2C0 + bool "Enable I2C0" + default n + if BSP_USING_I2C0 + choice + prompt "i2c0 scl pin number (GP)" + depends on BSP_USING_I2C0 + default BSP_I2C0_SCL_PIN_21 + config BSP_I2C0_SCL_PIN_1 + bool "1" + config BSP_I2C0_SCL_PIN_5 + bool "5" + config BSP_I2C0_SCL_PIN_9 + bool "9" + config BSP_I2C0_SCL_PIN_13 + bool "13" + config BSP_I2C0_SCL_PIN_17 + bool "17" + config BSP_I2C0_SCL_PIN_21 + bool "21" + endchoice + config BSP_I2C0_SCL_PIN + int + default 1 if BSP_I2C0_SCL_PIN_1 + default 5 if BSP_I2C0_SCL_PIN_5 + default 9 if BSP_I2C0_SCL_PIN_9 + default 13 if BSP_I2C0_SCL_PIN_13 + default 17 if BSP_I2C0_SCL_PIN_17 + default 21 if BSP_I2C0_SCL_PIN_21 + + choice + prompt "i2c0 sda pin number (GP)" + depends on BSP_USING_I2C0 + default BSP_I2C0_SDA_PIN_20 + config BSP_I2C0_SDA_PIN_0 + bool "0" + config BSP_I2C0_SDA_PIN_4 + bool "4" + config BSP_I2C0_SDA_PIN_8 + bool "8" + config BSP_I2C0_SDA_PIN_12 + bool "12" + config BSP_I2C0_SDA_PIN_16 + bool "16" + config BSP_I2C0_SDA_PIN_20 + bool "20" + endchoice + config BSP_I2C0_SDA_PIN + int + default 0 if BSP_I2C0_SDA_PIN_0 + default 4 if BSP_I2C0_SDA_PIN_4 + default 8 if BSP_I2C0_SDA_PIN_8 + default 12 if BSP_I2C0_SDA_PIN_12 + default 16 if BSP_I2C0_SDA_PIN_16 + default 20 if BSP_I2C0_SDA_PIN_20 + endif + + config BSP_USING_I2C1 + bool "Enable I2C1" + default n + if BSP_USING_I2C1 + choice + prompt "i2c1 scl pin number (GP)" + depends on BSP_USING_I2C1 + config BSP_I2C1_SCL_PIN_3 + bool "3" + config BSP_I2C1_SCL_PIN_7 + bool "7" + config BSP_I2C1_SCL_PIN_11 + bool "11" + config BSP_I2C1_SCL_PIN_15 + bool "15" + config BSP_I2C1_SCL_PIN_19 + bool "19" + config BSP_I2C1_SCL_PIN_27 + bool "27" + endchoice + config BSP_I2C1_SCL_PIN + int + default 3 if BSP_I2C1_SCL_PIN_3 + default 7 if BSP_I2C1_SCL_PIN_7 + default 11 if BSP_I2C1_SCL_PIN_11 + default 15 if BSP_I2C1_SCL_PIN_15 + default 19 if BSP_I2C1_SCL_PIN_19 + default 27 if BSP_I2C1_SCL_PIN_27 + + choice + prompt "i2c1 sda pin number (GP)" + depends on BSP_USING_I2C1 + config BSP_I2C1_SDA_PIN_2 + bool "2" + config BSP_I2C1_SDA_PIN_6 + bool "6" + config BSP_I2C1_SDA_PIN_10 + bool "10" + config BSP_I2C1_SDA_PIN_14 + bool "14" + config BSP_I2C1_SDA_PIN_18 + bool "18" + config BSP_I2C1_SDA_PIN_26 + bool "26" + endchoice + config BSP_I2C1_SDA_PIN + int + default 2 if BSP_I2C1_SDA_PIN_2 + default 6 if BSP_I2C1_SDA_PIN_6 + default 10 if BSP_I2C1_SDA_PIN_10 + default 14 if BSP_I2C1_SDA_PIN_14 + default 18 if BSP_I2C1_SDA_PIN_18 + default 26 if BSP_I2C1_SDA_PIN_26 + endif + endif + + config BSP_USING_ON_CHIP_FLASH + bool "Enable On-Chip FLASH" + select FAL_DEBUG_CONFIG + select FAL_PART_HAS_TABLE_CFG + default n + +endmenu + +endmenu |