Merge pull request #4737 from mysterywolf/3,1,xformatv3.1.5

[lts 3.1.x] format codes

1 files changed, 115 insertions, 115 deletions

diff --git a/bsp/mb9bf500r/lcd.h b/bsp/mb9bf500r/lcd.h
index bb500f341f..e0fa9efdc3 100644
--- a/bsp/mb9bf500r/lcd.h
+++ b/bsp/mb9bf500r/lcd.h
@@ -15,166 +15,166 @@
 #include "mb9bf506r.h"
 
 /********* LCD Hardward Interface *************
-LCD_CS		PORT1.7
-LCD_CD		PORT1.6
-LCD_WR		PORT1.5
-LCD_RD		PORT1.4
-LCD_SCK		PORT1.3
-LCD_MOSI	PORT1.2
-LCD_C86		PORT1.1
-LCD_PS		PORT1.0
-LCD_DATA[0..7]		PORT5.[0..7]
+LCD_CS      PORT1.7
+LCD_CD      PORT1.6
+LCD_WR      PORT1.5
+LCD_RD      PORT1.4
+LCD_SCK     PORT1.3
+LCD_MOSI    PORT1.2
+LCD_C86     PORT1.1
+LCD_PS      PORT1.0
+LCD_DATA[0..7]      PORT5.[0..7]
 ***********************************************/
-#define LCD_CS					(1UL << 7)
-#define LCD_CS_DDR				(FM3_GPIO->DDR1)
-#define LCD_CS_PFR				(FM3_GPIO->PFR1)
-#define LCD_CS_PDOR				(FM3_GPIO->PDOR1)
+#define LCD_CS                  (1UL << 7)
+#define LCD_CS_DDR              (FM3_GPIO->DDR1)
+#define LCD_CS_PFR              (FM3_GPIO->PFR1)
+#define LCD_CS_PDOR             (FM3_GPIO->PDOR1)
 
-#define LCD_CD					(1UL << 6)
-#define LCD_CD_DDR				(FM3_GPIO->DDR1)
-#define LCD_CD_PFR				(FM3_GPIO->PFR1)
-#define LCD_CD_PDOR				(FM3_GPIO->PDOR1)
+#define LCD_CD                  (1UL << 6)
+#define LCD_CD_DDR              (FM3_GPIO->DDR1)
+#define LCD_CD_PFR              (FM3_GPIO->PFR1)
+#define LCD_CD_PDOR             (FM3_GPIO->PDOR1)
 
-#define LCD_PS					(1UL << 0)
-#define LCD_PS_DDR				(FM3_GPIO->DDR1)
-#define LCD_PS_PFR				(FM3_GPIO->PFR1)
-#define LCD_PS_PDOR				(FM3_GPIO->PDOR1)
+#define LCD_PS                  (1UL << 0)
+#define LCD_PS_DDR              (FM3_GPIO->DDR1)
+#define LCD_PS_PFR              (FM3_GPIO->PFR1)
+#define LCD_PS_PDOR             (FM3_GPIO->PDOR1)
 
-#define LCD_CLK					(1UL << 6)
-#define LCD_CLK_DDR				(FM3_GPIO->DDR5)
-#define LCD_CLK_PFR				(FM3_GPIO->PFR5)
-#define LCD_CLK_PDOR			(FM3_GPIO->PDOR5)
+#define LCD_CLK                 (1UL << 6)
+#define LCD_CLK_DDR             (FM3_GPIO->DDR5)
+#define LCD_CLK_PFR             (FM3_GPIO->PFR5)
+#define LCD_CLK_PDOR            (FM3_GPIO->PDOR5)
 
-#define LCD_DATA				(1UL << 7)
-#define LCD_DATA_DDR			(FM3_GPIO->DDR5)
-#define LCD_DATA_PFR			(FM3_GPIO->PFR5)
-#define LCD_DATA_PDOR			(FM3_GPIO->PDOR5)
+#define LCD_DATA                (1UL << 7)
+#define LCD_DATA_DDR            (FM3_GPIO->DDR5)
+#define LCD_DATA_PFR            (FM3_GPIO->PFR5)
+#define LCD_DATA_PDOR           (FM3_GPIO->PDOR5)
 
 /* LCD driver for ZYMG12864C3 */
-#define LCD_WIDTH				128
-#define LCD_HEIGHT				64
+#define LCD_WIDTH               128
+#define LCD_HEIGHT              64
 
 // Driver the LCD with Parallel or serial interface and the command/data control pin is gpio
-#define LCD_CS_HIGH()			LCD_CS_PDOR  |=  LCD_CS
-#define LCD_CS_LOW()			LCD_CS_PDOR  &= ~LCD_CS
+#define LCD_CS_HIGH()           LCD_CS_PDOR  |=  LCD_CS
+#define LCD_CS_LOW()            LCD_CS_PDOR  &= ~LCD_CS
 
-#define LCD_CD_HIGH()			LCD_CD_PDOR |=  LCD_CD
-#define LCD_CD_LOW()			LCD_CD_PDOR &= ~LCD_CD
+#define LCD_CD_HIGH()           LCD_CD_PDOR |=  LCD_CD
+#define LCD_CD_LOW()            LCD_CD_PDOR &= ~LCD_CD
 
-#define LCD_PS_HIGH()			LCD_PS_PDOR |=  LCD_PS
-#define LCD_PS_LOW()			LCD_PS_PDOR &= ~LCD_PS
+#define LCD_PS_HIGH()           LCD_PS_PDOR |=  LCD_PS
+#define LCD_PS_LOW()            LCD_PS_PDOR &= ~LCD_PS
 
-#define LCD_CLK_HIGH()			LCD_CLK_PDOR |=  LCD_CLK
-#define LCD_CLK_LOW()			LCD_CLK_PDOR &= ~LCD_CLK
+#define LCD_CLK_HIGH()          LCD_CLK_PDOR |=  LCD_CLK
+#define LCD_CLK_LOW()           LCD_CLK_PDOR &= ~LCD_CLK
 
-#define LCD_DATA_HIGH()			LCD_DATA_PDOR |=  LCD_DATA
-#define LCD_DATA_LOW()			LCD_DATA_PDOR &= ~LCD_DATA
+#define LCD_DATA_HIGH()         LCD_DATA_PDOR |=  LCD_DATA
+#define LCD_DATA_LOW()          LCD_DATA_PDOR &= ~LCD_DATA
 
 // define the arrtibute of ZYMG12864(LCM)
-#define GUI_LCM_XMAX 			128		// defined the lcd's line-number is 128 
-#define GUI_LCM_YMAX 			64		// defined the lcd's column-number is 64
-#define GUI_LCM_PAGE			8		// defined the lcd's page-number is 8(GUI_LCM_YMAX/8)
+#define GUI_LCM_XMAX            128     // defined the lcd's line-number is 128
+#define GUI_LCM_YMAX            64      // defined the lcd's column-number is 64
+#define GUI_LCM_PAGE            8       // defined the lcd's page-number is 8(GUI_LCM_YMAX/8)
 
 /* set LCD command */
-#define DISPLAY_ON				0xAF	// A0,RD,WR:010
-#define DISPLAY_OFF				0xAE	// A0,RD,WR:010
+#define DISPLAY_ON              0xAF    // A0,RD,WR:010
+#define DISPLAY_OFF             0xAE    // A0,RD,WR:010
 
-#define SET_START_LINE_0		0x40	// A0,RD,WR:010; line0~line63
-#define SET_PAGE_ADDR_0			0xB0	// A0,RD,WR:010; addr0~addr8
-#define SET_COLH_ADDR_0			0x10	// A0,RD,WR:010; 
-#define SET_COLL_ADDR_0			0x00	// A0,RD,WR:010; addr0~addr131
+#define SET_START_LINE_0        0x40    // A0,RD,WR:010; line0~line63
+#define SET_PAGE_ADDR_0         0xB0    // A0,RD,WR:010; addr0~addr8
+#define SET_COLH_ADDR_0         0x10    // A0,RD,WR:010;
+#define SET_COLL_ADDR_0         0x00    // A0,RD,WR:010; addr0~addr131
 
-#define READ_STATUS				0x-0	// A0,RD,WR:001; BUSY | ADC | ON/OFF |  RESET | 0 0 0 0
-#define STATUS_BUSY				0x80
-#define STATUS_ADC_REVERSE		0x40	// column address 131-n : SEG n, else column address n : SEG n
-#define STATUS_DISPLAY_OFF		0x20
-#define STATUS_RESET			0x80
+#define READ_STATUS             0x-0    // A0,RD,WR:001; BUSY | ADC | ON/OFF |  RESET | 0 0 0 0
+#define STATUS_BUSY             0x80
+#define STATUS_ADC_REVERSE      0x40    // column address 131-n : SEG n, else column address n : SEG n
+#define STATUS_DISPLAY_OFF      0x20
+#define STATUS_RESET            0x80
 
-#define WRITE_DATA				0x--	// A0,RD,WR:110
-#define READ_DATE				0x--	// A0,RD,WR:101; spi mode is unavailable
+#define WRITE_DATA              0x--    // A0,RD,WR:110
+#define READ_DATE               0x--    // A0,RD,WR:101; spi mode is unavailable
 
-#define SET_ADC_NORMAL			0xA0	// A0,RD,WR:010
-#define SET_ADC_REVERSE			0xA1	// A0,RD,WR:010
-#define DISPLAY_NORMAL			0xA6	// A0,RD,WR:010
-#define DISPLAY_REVERSE			0xA7	// A0,RD,WR:010; reverse color
-#define DISPLAY_ALL_ON			0xA5	// A0,RD,WR:010
-#define DISPLAY_ALL_NORMAL		0xA4	// A0,RD,WR:010
+#define SET_ADC_NORMAL          0xA0    // A0,RD,WR:010
+#define SET_ADC_REVERSE         0xA1    // A0,RD,WR:010
+#define DISPLAY_NORMAL          0xA6    // A0,RD,WR:010
+#define DISPLAY_REVERSE         0xA7    // A0,RD,WR:010; reverse color
+#define DISPLAY_ALL_ON          0xA5    // A0,RD,WR:010
+#define DISPLAY_ALL_NORMAL      0xA4    // A0,RD,WR:010
 
 /*************************************************************
-*	bias:	1/65duty | 1/49duty | 1/33duty | 1/55duty | 1/53duty *
-*	---------------|----------|----------|----------|--------- *
-*	A2: 	1/9 bias | 1/8 bias | 1/6 bias | 1/8 bias | 1/8 bias *
-*	A3:		1/7 bias | 1/6 bias | 1/5 bias | 1/6 bias | 1/6 bias *
+*   bias:   1/65duty | 1/49duty | 1/33duty | 1/55duty | 1/53duty *
+*   ---------------|----------|----------|----------|--------- *
+*   A2:     1/9 bias | 1/8 bias | 1/6 bias | 1/8 bias | 1/8 bias *
+*   A3:     1/7 bias | 1/6 bias | 1/5 bias | 1/6 bias | 1/6 bias *
 **************************************************************/
 
-#define SET_LCD_BIAS_7    		0xA3	// A0,RD,WR:010
-#define SET_LCD_BIAS_9    		0xA2	// A0,RD,WR:010
+#define SET_LCD_BIAS_7          0xA3    // A0,RD,WR:010
+#define SET_LCD_BIAS_9          0xA2    // A0,RD,WR:010
 
-#define RMW_MODE_ENABLE   		0xE0	// A0,RD,WR:010; the column address locked when read command operating
-#define RMW_MODE_END		  	0xEE	// A0,RD,WR:010; returns to the column address when RMW was entered.
-#define RESET_LCD         		0xE2	// A0,RD,WR:010
+#define RMW_MODE_ENABLE         0xE0    // A0,RD,WR:010; the column address locked when read command operating
+#define RMW_MODE_END            0xEE    // A0,RD,WR:010; returns to the column address when RMW was entered.
+#define RESET_LCD               0xE2    // A0,RD,WR:010
 
 
 /**************************************************************************************
-*	Com Scan Dir:	|	1/65duty 		| 1/49duty 		| 1/33duty 		| 1/55duty 		| 1/53duty		*
-*	--------------|-------------|-------------|-------------|------------------------ 	*
-*	C0: 	Normal	|	COM0:COM63	|	COM0:COM47	|	COM0:COM31	|	COM0:COM53	|	COM0:COM51	*
-*	C8:		Reverse	|	COM63:COM0	|	COM47:COM0	|	COM31:COM0	|	COM53:COM0	|	COM51:COM0	*
+*   Com Scan Dir:   |   1/65duty        | 1/49duty      | 1/33duty      | 1/55duty      | 1/53duty      *
+*   --------------|-------------|-------------|-------------|------------------------   *
+*   C0:     Normal  |   COM0:COM63  |   COM0:COM47  |   COM0:COM31  |   COM0:COM53  |   COM0:COM51  *
+*   C8:     Reverse |   COM63:COM0  |   COM47:COM0  |   COM31:COM0  |   COM53:COM0  |   COM51:COM0  *
 ***************************************************************************************/
 
-#define COM_SCAN_DIR_NORMAL		0xC0	// A0,RD,WR:010
-#define COM_SCAN_DIR_REVERSE	0xC8	// A0,RD,WR:010
+#define COM_SCAN_DIR_NORMAL     0xC0    // A0,RD,WR:010
+#define COM_SCAN_DIR_REVERSE    0xC8    // A0,RD,WR:010
 
 // 0 0 1 0 1 | Booster On | Regulator On | Follower On
-#define POWER_BOOSTER_ON		0x2C	// A0,RD,WR:010
-#define POWER_REGULATOR_ON		0x2E	// A0,RD,WR:010
-#define POWER_FOLLOWER_ON		0x2F	// A0,RD,WR:010
+#define POWER_BOOSTER_ON        0x2C    // A0,RD,WR:010
+#define POWER_REGULATOR_ON      0x2E    // A0,RD,WR:010
+#define POWER_FOLLOWER_ON       0x2F    // A0,RD,WR:010
 
-#define SET_RESISTOR_RATIO		0x20	// A0,RD,WR:010; 20~27:small~large
+#define SET_RESISTOR_RATIO      0x20    // A0,RD,WR:010; 20~27:small~large
 
-#define SET_ELECVOL_MODE		0x81	// A0,RD,WR:010; double byte command
-#define SET_ELECVOL_REG			0x20	// A0,RD,WR:010; the electronic volume(64 voltage levels:00~3F) function is not used.
+#define SET_ELECVOL_MODE        0x81    // A0,RD,WR:010; double byte command
+#define SET_ELECVOL_REG         0x20    // A0,RD,WR:010; the electronic volume(64 voltage levels:00~3F) function is not used.
 
-#define SLEEP_MODE_ENABLE		0xAC	// A0,RD,WR:010; double byte command, preceding command
-#define SLEEP_MODE_DISABLE		0xAD	// A0,RD,WR:010; preceding command
-#define SLEEP_MODE_DELIVER		0x00	// A0,RD,WR:010; following command
+#define SLEEP_MODE_ENABLE       0xAC    // A0,RD,WR:010; double byte command, preceding command
+#define SLEEP_MODE_DISABLE      0xAD    // A0,RD,WR:010; preceding command
+#define SLEEP_MODE_DELIVER      0x00    // A0,RD,WR:010; following command
 
-#define BOOST_RATIO_SET			0xF8	// A0,RD,WR:010; double byte command, preceding command
-#define BOOST_RATIO_234			0x00	// A0,RD,WR:010; following command
-#define BOOST_RATIO_5			0x01	// A0,RD,WR:010; following command
-#define BOOST_RATIO_6			0x03	// A0,RD,WR:010; following command
+#define BOOST_RATIO_SET         0xF8    // A0,RD,WR:010; double byte command, preceding command
+#define BOOST_RATIO_234         0x00    // A0,RD,WR:010; following command
+#define BOOST_RATIO_5           0x01    // A0,RD,WR:010; following command
+#define BOOST_RATIO_6           0x03    // A0,RD,WR:010; following command
 
-#define COMMAND_NOP				0xE3	// A0,RD,WR:010
-#define COMMAND_IC_TEST			0xFC	// A0,RD,WR:010; don't use
+#define COMMAND_NOP             0xE3    // A0,RD,WR:010
+#define COMMAND_IC_TEST         0xFC    // A0,RD,WR:010; don't use
 
-#define RT_DEVICE_CTRL_LCD_GET_WIDTH			0
-#define RT_DEVICE_CTRL_LCD_GET_HEIGHT			1
-#define RT_DEVICE_CTRL_LCD_GET_BPP			 	2
-#define RT_DEVICE_CTRL_LCD_GET_FRAMEBUFFER		3
-#define RT_DEVICE_CTRL_LCD_POWER_ON     		4
-#define RT_DEVICE_CTRL_LCD_POWER_OFF     		5
-#define RT_DEVICE_CTRL_LCD_CLEAR_SCR     		6
-#define RT_DEVICE_CTRL_LCD_FILL_ALL     		7
-#define RT_DEVICE_CTRL_LCD_UPDATE_POINT    		8
-#define RT_DEVICE_CTRL_LCD_DISPLAY_ON    		9
-#define RT_DEVICE_CTRL_LCD_DISPLAY_OFF    		10
-#define RT_DEVICE_CTRL_LCD_PUT_STRING    		11
+#define RT_DEVICE_CTRL_LCD_GET_WIDTH            0
+#define RT_DEVICE_CTRL_LCD_GET_HEIGHT           1
+#define RT_DEVICE_CTRL_LCD_GET_BPP              2
+#define RT_DEVICE_CTRL_LCD_GET_FRAMEBUFFER      3
+#define RT_DEVICE_CTRL_LCD_POWER_ON             4
+#define RT_DEVICE_CTRL_LCD_POWER_OFF            5
+#define RT_DEVICE_CTRL_LCD_CLEAR_SCR            6
+#define RT_DEVICE_CTRL_LCD_FILL_ALL             7
+#define RT_DEVICE_CTRL_LCD_UPDATE_POINT         8
+#define RT_DEVICE_CTRL_LCD_DISPLAY_ON           9
+#define RT_DEVICE_CTRL_LCD_DISPLAY_OFF          10
+#define RT_DEVICE_CTRL_LCD_PUT_STRING           11
 
-enum 
+enum
 {
-	ADC_MSG,
-	KEY_MSG,
-	CPU_MSG,
-	MAX_MSG,
+    ADC_MSG,
+    KEY_MSG,
+    CPU_MSG,
+    MAX_MSG,
 };
 
 struct lcd_msg
 {
-	rt_uint8_t	type;
-	rt_uint16_t	adc_value;
-	rt_uint8_t	key;
-	rt_uint16_t	major;
-	rt_uint16_t	minor;
+    rt_uint8_t  type;
+    rt_uint16_t adc_value;
+    rt_uint8_t  key;
+    rt_uint16_t major;
+    rt_uint16_t minor;
 };
 
 extern rt_uint32_t x;