[Kconfig] Rename all of KConfig files to 'Kconfig'

1 files changed, 0 insertions, 207 deletions

diff --git a/components/drivers/KConfig b/components/drivers/KConfig
deleted file mode 100644
index 7c1929b15f..0000000000
--- a/components/drivers/KConfig
+++ /dev/null
@@ -1,207 +0,0 @@
-menu "Device Drivers"
-
-config RT_USING_DEVICE_IPC
-    bool "Using device drivers IPC"
-    default y
-
-config RT_USING_SERIAL
-    bool "Using serial device drivers"
-    default y
-
-config RT_USING_CAN
-    bool "Using CAN device drivers"
-    default n
-
-config RT_USING_HWTIMER
-    bool "Using hardware timer device drivers"
-    default n
-
-config RT_USING_I2C
-    bool "Using I2C device drivers"
-    default n
-
-if RT_USING_I2C
-    config RT_USING_I2C_BITOPS
-        bool "Use GPIO to simulate I2C"
-        default y
-endif
-
-config RT_USING_PIN
-    bool "Using generic GPIO device drivers"
-    default y
-
-config RT_USING_MTD_NOR
-    bool "Using MTD Nor Flash device drivers"
-    default n
-
-config RT_USING_MTD_NAND
-    bool "Using MTD Nand Flash device drivers"
-    default n
-
-    if RT_USING_MTD_NAND
-    config RT_MTD_NAND_DEBUG
-        bool "Enable MTD Nand operations debug information"
-        default n
-    endif
-
-config RT_USING_RTC
-    bool "Using RTC device drivers"
-    default n
-
-config RT_USING_SDIO
-    bool "Using SD/MMC device drivers"
-    default n
-
-config RT_USING_SPI
-    bool "Using SPI Bus/Device device drivers"
-    default n
-
-    if RT_USING_SPI
-        config RT_USING_SFUD
-            bool "Using Serial Flash Universal Driver"
-            default n
-            if RT_USING_SFUD            
-                config RT_SFUD_USING_SFDP
-                bool "Using auto probe flash JEDEC SFDP parameter"
-                default y
-                
-                config RT_SFUD_USING_FLASH_INFO_TABLE
-                bool "Using defined supported flash chip information table"
-                default y
-                
-                config RT_SFUD_DEBUG
-                bool "Show more SFUD debug information"
-                default n
-            endif
-    
-        config RT_USING_W25QXX
-            bool "Using W25QXX SPI NorFlash"
-            default n
-
-        config RT_USING_GD
-            bool "Using GD SPI NorFlash"
-            default n
-
-        config RT_USING_ENC28J60
-            bool "Using ENC28J60 SPI Ethernet network interface"
-            select RT_USING_LWIP
-            default n
-
-        config RT_USING_SPI_WIFI
-            bool "Using RW009/007 SPI Wi-Fi wireless interface"
-            select RT_USING_LWIP
-            default n
-    endif
-
-config RT_USING_WDT
-    bool "Using Watch Dog device drivers"
-    default n
-
-config RT_USING_WIFI
-    bool "Using Wi-Fi network"
-    default n
-
-menu "Using USB"
-    config RT_USING_USB_HOST
-        bool "Using USB host"
-        default n
-
-        if RT_USING_USB_HOST
-            config RT_USBH_ADK
-                bool "Enable connected with Android by ADK USB"
-                default n
-        endif
-    config RT_USING_USB_DEVICE
-        bool "Using USB device"
-        default n
-
-        if RT_USING_USB_DEVICE
-            config RT_USB_DEVICE_COMPOSITE
-                bool "Enable composite device"
-                default n
-                choice
-                    prompt "Device type"
-                    default _RT_USB_DEVICE_CDC
-                    depends on !RT_USB_DEVICE_COMPOSITE
-                    config _RT_USB_DEVICE_CDC
-                        bool "Enable to use device as CDC device"
-                        select RT_USB_DEVICE_CDC
-                    config _RT_USB_DEVICE_MSTORAGE
-                        bool "Enable to use device as Mass Storage device"
-                        select RT_USB_DEVICE_MSTORAGE
-                    config _RT_USB_DEVICE_HID
-                        bool "Enable to use device as HID device"
-                        select RT_USB_DEVICE_HID
-                    config _RT_USB_DEVICE_RNDIS
-                        bool "Enable to use device as rndis device"
-                        select RT_USB_DEVICE_RNDIS
-                        depends on RT_USING_LWIP
-                    config _RT_USB_DEVICE_ECM
-                        bool "Enable to use device as ecm device"
-                        select RT_USB_DEVICE_ECM
-                        depends on RT_USING_LWIP
-                    config _RT_USB_DEVICE_WINUSB
-                        bool "Enable to use device as winusb device"
-                        select RT_USB_DEVICE_WINUSB
-                endchoice
-                if RT_USB_DEVICE_COMPOSITE
-                    config RT_USB_DEVICE_CDC
-                        bool "Enable to use device as CDC device"
-                        default y
-                    config RT_USB_DEVICE_MSTORAGE
-                        bool "Enable to use device as Mass Storage device"
-                        default n
-                    config RT_USB_DEVICE_HID
-                        bool "Enable to use device as HID device"
-                        default n
-                    config RT_USB_DEVICE_RNDIS
-                        bool "Enable to use device as rndis device"
-                        default n
-                        depends on RT_USING_LWIP
-                    config RT_USB_DEVICE_ECM
-                        bool "Enable to use device as ecm device"
-                        default n
-                        depends on RT_USING_LWIP
-                    config RT_USB_DEVICE_WINUSB
-                        bool "Enable to use device as winusb device"
-                        default n
-                endif
-                if RT_USB_DEVICE_MSTORAGE
-                    config RT_USB_MSTORAGE_DISK_NAME
-                    string "msc class disk name"
-                    default "flash0"
-                endif
-                if RT_USB_DEVICE_HID
-                    config RT_USB_DEVICE_HID_KEYBOARD
-                        bool "Use to HID device as Keyboard"
-                        default n
-                    if RT_USB_DEVICE_HID_KEYBOARD
-                        config RT_USB_DEVICE_HID_KEYBOARD_NUMBER
-                        int "Number of Keyboard(max 3)"
-                        default 1
-                        range 1 3
-                    endif
-                    config RT_USB_DEVICE_HID_MOUSE
-                        bool "Use to HID device as Mouse"
-                        default n
-                    config RT_USB_DEVICE_HID_GENERAL
-                        bool "Use to HID device as General HID device"
-                        default y
-                        if RT_USB_DEVICE_HID_GENERAL
-                            config RT_USB_DEVICE_HID_GENERAL_OUT_REPORT_LENGTH
-                                int "General HID device out report length"
-                                default 63
-                                range 0 63
-
-                            config RT_USB_DEVICE_HID_GENERAL_IN_REPORT_LENGTH
-                                int "General HID device in report length"
-                                default 63
-                                range 0 63
-                        endif
-                    config RT_USB_DEVICE_HID_MEDIA
-                        bool "Use to HID device as media keyboard"
-                        default y
-                endif
-        endif
-    endmenu
-endmenu