[External] Remove external from RT-Thread

23 files changed, 0 insertions, 21757 deletions

diff --git a/components/external/SQLite-3.8.1/autoconf/INSTALL b/components/external/SQLite-3.8.1/autoconf/INSTALL
deleted file mode 100644
index a1e89e18ad..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/INSTALL
+++ /dev/null
@@ -1,370 +0,0 @@
-Installation Instructions
-*************************
-
-Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
-Inc.
-
-   Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved.  This file is offered as-is,
-without warranty of any kind.
-
-Basic Installation
-==================
-
-   Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package.  The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.  Some packages provide this
-`INSTALL' file but do not implement all of the features documented
-below.  The lack of an optional feature in a given package is not
-necessarily a bug.  More recommendations for GNU packages can be found
-in *note Makefile Conventions: (standards)Makefile Conventions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
-
-   The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.
-
-     Running `configure' might take a while.  While running, it prints
-     some messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package, generally using the just-built uninstalled binaries.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.  When installing into a prefix owned by root, it is
-     recommended that the package be configured and built as a regular
-     user, and only the `make install' phase executed with root
-     privileges.
-
-  5. Optionally, type `make installcheck' to repeat any self-tests, but
-     this time using the binaries in their final installed location.
-     This target does not install anything.  Running this target as a
-     regular user, particularly if the prior `make install' required
-     root privileges, verifies that the installation completed
-     correctly.
-
-  6. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-  7. Often, you can also type `make uninstall' to remove the installed
-     files again.  In practice, not all packages have tested that
-     uninstallation works correctly, even though it is required by the
-     GNU Coding Standards.
-
-  8. Some packages, particularly those that use Automake, provide `make
-     distcheck', which can by used by developers to test that all other
-     targets like `make install' and `make uninstall' work correctly.
-     This target is generally not run by end users.
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
-for details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
-
-     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you can use GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.  This
-is known as a "VPATH" build.
-
-   With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory.  After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
-   On MacOS X 10.5 and later systems, you can create libraries and
-executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor.  Like
-this:
-
-     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
-                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
-                 CPP="gcc -E" CXXCPP="g++ -E"
-
-   This is not guaranteed to produce working output in all cases, you
-may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
-
-Installation Names
-==================
-
-   By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
-absolute file name.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.  In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
-specifications that were not explicitly provided.
-
-   The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
-both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
-having to reconfigure or recompile.
-
-   The first method involves providing an override variable for each
-affected directory.  For example, `make install
-prefix=/alternate/directory' will choose an alternate location for all
-directory configuration variables that were expressed in terms of
-`${prefix}'.  Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated.  The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
-   The second method involves providing the `DESTDIR' variable.  For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names.  The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
-does not work on platforms that have drive letters.  On the other hand,
-it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
-
-Optional Features
-=================
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-   Some packages offer the ability to configure how verbose the
-execution of `make' will be.  For these packages, running `./configure
---enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
---disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
-
-Particular systems
-==================
-
-   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
-CC is not installed, it is recommended to use the following options in
-order to use an ANSI C compiler:
-
-     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
-
-and if that doesn't work, install pre-built binaries of GCC for HP-UX.
-
-   HP-UX `make' updates targets which have the same time stamps as
-their prerequisites, which makes it generally unusable when shipped
-generated files such as `configure' are involved.  Use GNU `make'
-instead.
-
-   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
-a workaround.  If GNU CC is not installed, it is therefore recommended
-to try
-
-     ./configure CC="cc"
-
-and if that doesn't work, try
-
-     ./configure CC="cc -nodtk"
-
-   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
-directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
-
-   On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'.  It is recommended to use the following options:
-
-     ./configure --prefix=/boot/common
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS
-     KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-   Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug.  Until the bug is fixed you can use this workaround:
-
-     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
-     Print a summary of all of the options to `configure', and exit.
-
-`--help=short'
-`--help=recursive'
-     Print a summary of the options unique to this package's
-     `configure', and exit.  The `short' variant lists options used
-     only in the top level, while the `recursive' variant lists options
-     also present in any nested packages.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`--prefix=DIR'
-     Use DIR as the installation prefix.  *note Installation Names::
-     for more details, including other options available for fine-tuning
-     the installation locations.
-
-`--no-create'
-`-n'
-     Run the configure checks, but stop before creating any output
-     files.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
-
diff --git a/components/external/SQLite-3.8.1/autoconf/Makefile.am b/components/external/SQLite-3.8.1/autoconf/Makefile.am
deleted file mode 100644
index 6fc4f33c0e..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/Makefile.am
+++ /dev/null
@@ -1,19 +0,0 @@
-
-AM_CFLAGS = @THREADSAFE_FLAGS@ @DYNAMIC_EXTENSION_FLAGS@ -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_RTREE
-
-lib_LTLIBRARIES = libsqlite3.la
-libsqlite3_la_SOURCES = sqlite3.c
-libsqlite3_la_LDFLAGS = -no-undefined -version-info 8:6:8
-
-bin_PROGRAMS = sqlite3
-sqlite3_SOURCES = shell.c sqlite3.h
-sqlite3_LDADD = $(top_builddir)/libsqlite3.la @READLINE_LIBS@
-sqlite3_DEPENDENCIES = $(top_builddir)/libsqlite3.la
-
-include_HEADERS = sqlite3.h sqlite3ext.h
-
-EXTRA_DIST = sqlite3.1 tea
-pkgconfigdir = ${libdir}/pkgconfig
-pkgconfig_DATA = sqlite3.pc
-
-man_MANS = sqlite3.1
diff --git a/components/external/SQLite-3.8.1/autoconf/README b/components/external/SQLite-3.8.1/autoconf/README
deleted file mode 100644
index dd8cca24bd..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/README
+++ /dev/null
@@ -1,32 +0,0 @@
-
-This package contains:
-
- * the SQLite library amalgamation (single file) source code distribution,
- * the shell.c file used to build the sqlite3 shell too, and
- * the sqlite3.h and sqlite3ext.h header files required to link programs
-   and sqlite extensions against the installed libary.
- * autoconf/automake installation infrastucture.
-
-The generic installation instructions for autoconf/automake are found
-in the INSTALL file.
-
-The following SQLite specific boolean options are supported:
-
-  --enable-readline           use readline in shell tool   [default=yes]
-  --enable-threadsafe         build a thread-safe library  [default=yes]
-  --enable-dynamic-extensions support loadable extensions  [default=yes]
-
-The default value for the CFLAGS variable (options passed to the C 
-compiler) includes debugging symbols in the build, resulting in larger
-binaries than are necessary. Override it on the configure command
-line like this:
-
-  $ CFLAGS="-Os" ./configure
-
-to produce a smaller installation footprint.
-
-Other SQLite compilation parameters can also be set using CFLAGS. For
-example:
-
-  $ CFLAGS="-Os -DSQLITE_OMIT_TRIGGERS" ./configure
-
diff --git a/components/external/SQLite-3.8.1/autoconf/README.first b/components/external/SQLite-3.8.1/autoconf/README.first
deleted file mode 100644
index 6676228ad6..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/README.first
+++ /dev/null
@@ -1,57 +0,0 @@
-
-This file describes how to use the files in this directory to create a new
-version of the "autoconf-amalgamation" package.
-
-1. The following files should have executable permission:
-
-  chmod 755 install-sh 
-  chmod 755 missing 
-  chmod 755 depcomp
-  chmod 755 config.sub
-  chmod 755 config.guess
-
-2. Copy new versions of the following SQLite files into this directory:
-
-  sqlite3.c
-  sqlite3.h
-  sqlite3ext.h
-  sqlite3.1
-  sqlite3.pc.in
-  shell.c
-
-3. Update the SQLite version number in the AC_INIT macro in file 
-   configure.ac:
-
-     AC_INIT(sqlite, 3.6.3, http://www.sqlite.org)
-
-4. Run the following commands to push the version number change through
-   to the generated files.
-
-  aclocal
-  autoconf
-  automake
-
-5. Create the tclsqlite3.c file in the tea/generic directory. As follows:
-
-  mkdir -p tea/generic
-  echo "#ifdef USE_SYSTEM_SQLITE"      > tea/generic/tclsqlite3.c 
-  echo "# include <sqlite3.h>"        >> tea/generic/tclsqlite3.c
-  echo "#else"                        >> tea/generic/tclsqlite3.c
-  echo "#include \"../../sqlite3.c\"" >> tea/generic/tclsqlite3.c
-  echo "#endif"                       >> tea/generic/tclsqlite3.c
-  cat  ../src/tclsqlite.c             >> tea/generic/tclsqlite3.c
-
-6. Update the SQLite version in the AC_INIT macro in file tea/configure.in:
-
-  AC_INIT([sqlite], [3.6.3])
-
-7. From the 'tea' directory, run the following commands:
-
-  autoconf
-  rm -rf autom4te.cache
-
-8. Run "./configure && make dist". This builds a distribution package
-   named something like "sqlite-3.6.3.tar.gz". Rename to 
-   "sqlite-amalgamation-3.6.3.tar.gz" and use.
-
-
diff --git a/components/external/SQLite-3.8.1/autoconf/config.guess b/components/external/SQLite-3.8.1/autoconf/config.guess
deleted file mode 100644
index d622a44e55..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/config.guess
+++ /dev/null
@@ -1,1530 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011, 2012 Free Software Foundation, Inc.
-
-timestamp='2012-02-10'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner.  Please send patches (context
-# diff format) to <[email protected]> and include a ChangeLog
-# entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
-#
-# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <[email protected]>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help" >&2
-       exit 1 ;;
-    * )
-       break ;;
-  esac
-done
-
-if test $# != 0; then
-  echo "$me: too many arguments$help" >&2
-  exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,)    echo "int x;" > $dummy.c ;
-	for c in cc gcc c89 c99 ; do
-	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
-	     CC_FOR_BUILD="$c"; break ;
-	  fi ;
-	done ;
-	if test x"$CC_FOR_BUILD" = x ; then
-	  CC_FOR_BUILD=no_compiler_found ;
-	fi
-	;;
- ,,*)   CC_FOR_BUILD=$CC ;;
- ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# ([email protected] 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
-	PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
-    *:NetBSD:*:*)
-	# NetBSD (nbsd) targets should (where applicable) match one or
-	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
-	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
-	# switched to ELF, *-*-netbsd* would select the old
-	# object file format.  This provides both forward
-	# compatibility and a consistent mechanism for selecting the
-	# object file format.
-	#
-	# Note: NetBSD doesn't particularly care about the vendor
-	# portion of the name.  We always set it to "unknown".
-	sysctl="sysctl -n hw.machine_arch"
-	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
-	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
-	case "${UNAME_MACHINE_ARCH}" in
-	    armeb) machine=armeb-unknown ;;
-	    arm*) machine=arm-unknown ;;
-	    sh3el) machine=shl-unknown ;;
-	    sh3eb) machine=sh-unknown ;;
-	    sh5el) machine=sh5le-unknown ;;
-	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
-	esac
-	# The Operating System including object format, if it has switched
-	# to ELF recently, or will in the future.
-	case "${UNAME_MACHINE_ARCH}" in
-	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
-		eval $set_cc_for_build
-		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-			| grep -q __ELF__
-		then
-		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
-		    # Return netbsd for either.  FIX?
-		    os=netbsd
-		else
-		    os=netbsdelf
-		fi
-		;;
-	    *)
-		os=netbsd
-		;;
-	esac
-	# The OS release
-	# Debian GNU/NetBSD machines have a different userland, and
-	# thus, need a distinct triplet. However, they do not need
-	# kernel version information, so it can be replaced with a
-	# suitable tag, in the style of linux-gnu.
-	case "${UNAME_VERSION}" in
-	    Debian*)
-		release='-gnu'
-		;;
-	    *)
-		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-		;;
-	esac
-	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
-	# contains redundant information, the shorter form:
-	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
-	echo "${machine}-${os}${release}"
-	exit ;;
-    *:OpenBSD:*:*)
-	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
-	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
-	exit ;;
-    *:ekkoBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
-	exit ;;
-    *:SolidBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
-	exit ;;
-    macppc:MirBSD:*:*)
-	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
-	exit ;;
-    *:MirBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
-	exit ;;
-    alpha:OSF1:*:*)
-	case $UNAME_RELEASE in
-	*4.0)
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-		;;
-	*5.*)
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
-		;;
-	esac
-	# According to Compaq, /usr/sbin/psrinfo has been available on
-	# OSF/1 and Tru64 systems produced since 1995.  I hope that
-	# covers most systems running today.  This code pipes the CPU
-	# types through head -n 1, so we only detect the type of CPU 0.
-	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
-	case "$ALPHA_CPU_TYPE" in
-	    "EV4 (21064)")
-		UNAME_MACHINE="alpha" ;;
-	    "EV4.5 (21064)")
-		UNAME_MACHINE="alpha" ;;
-	    "LCA4 (21066/21068)")
-		UNAME_MACHINE="alpha" ;;
-	    "EV5 (21164)")
-		UNAME_MACHINE="alphaev5" ;;
-	    "EV5.6 (21164A)")
-		UNAME_MACHINE="alphaev56" ;;
-	    "EV5.6 (21164PC)")
-		UNAME_MACHINE="alphapca56" ;;
-	    "EV5.7 (21164PC)")
-		UNAME_MACHINE="alphapca57" ;;
-	    "EV6 (21264)")
-		UNAME_MACHINE="alphaev6" ;;
-	    "EV6.7 (21264A)")
-		UNAME_MACHINE="alphaev67" ;;
-	    "EV6.8CB (21264C)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.8AL (21264B)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.8CX (21264D)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.9A (21264/EV69A)")
-		UNAME_MACHINE="alphaev69" ;;
-	    "EV7 (21364)")
-		UNAME_MACHINE="alphaev7" ;;
-	    "EV7.9 (21364A)")
-		UNAME_MACHINE="alphaev79" ;;
-	esac
-	# A Pn.n version is a patched version.
-	# A Vn.n version is a released version.
-	# A Tn.n version is a released field test version.
-	# A Xn.n version is an unreleased experimental baselevel.
-	# 1.2 uses "1.2" for uname -r.
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
-	exitcode=$?
-	trap '' 0
-	exit $exitcode ;;
-    Alpha\ *:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# Should we change UNAME_MACHINE based on the output of uname instead
-	# of the specific Alpha model?
-	echo alpha-pc-interix
-	exit ;;
-    21064:Windows_NT:50:3)
-	echo alpha-dec-winnt3.5
-	exit ;;
-    Amiga*:UNIX_System_V:4.0:*)
-	echo m68k-unknown-sysv4
-	exit ;;
-    *:[Aa]miga[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-amigaos
-	exit ;;
-    *:[Mm]orph[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-morphos
-	exit ;;
-    *:OS/390:*:*)
-	echo i370-ibm-openedition
-	exit ;;
-    *:z/VM:*:*)
-	echo s390-ibm-zvmoe
-	exit ;;
-    *:OS400:*:*)
-	echo powerpc-ibm-os400
-	exit ;;
-    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
-	echo arm-acorn-riscix${UNAME_RELEASE}
-	exit ;;
-    arm:riscos:*:*|arm:RISCOS:*:*)
-	echo arm-unknown-riscos
-	exit ;;
-    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
-	echo hppa1.1-hitachi-hiuxmpp
-	exit ;;
-    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
-	# [email protected] (Earle F. Ake) contributed MIS and NILE.
-	if test "`(/bin/universe) 2>/dev/null`" = att ; then
-		echo pyramid-pyramid-sysv3
-	else
-		echo pyramid-pyramid-bsd
-	fi
-	exit ;;
-    NILE*:*:*:dcosx)
-	echo pyramid-pyramid-svr4
-	exit ;;
-    DRS?6000:unix:4.0:6*)
-	echo sparc-icl-nx6
-	exit ;;
-    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
-	case `/usr/bin/uname -p` in
-	    sparc) echo sparc-icl-nx7; exit ;;
-	esac ;;
-    s390x:SunOS:*:*)
-	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4H:SunOS:5.*:*)
-	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
-	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
-	echo i386-pc-auroraux${UNAME_RELEASE}
-	exit ;;
-    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
-	eval $set_cc_for_build
-	SUN_ARCH="i386"
-	# If there is a compiler, see if it is configured for 64-bit objects.
-	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
-	# This test works for both compilers.
-	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
-	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
-		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
-		grep IS_64BIT_ARCH >/dev/null
-	    then
-		SUN_ARCH="x86_64"
-	    fi
-	fi
-	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:6*:*)
-	# According to config.sub, this is the proper way to canonicalize
-	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
-	# it's likely to be more like Solaris than SunOS4.
-	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:*:*)
-	case "`/usr/bin/arch -k`" in
-	    Series*|S4*)
-		UNAME_RELEASE=`uname -v`
-		;;
-	esac
-	# Japanese Language versions have a version number like `4.1.3-JL'.
-	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-	exit ;;
-    sun3*:SunOS:*:*)
-	echo m68k-sun-sunos${UNAME_RELEASE}
-	exit ;;
-    sun*:*:4.2BSD:*)
-	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
-	case "`/bin/arch`" in
-	    sun3)
-		echo m68k-sun-sunos${UNAME_RELEASE}
-		;;
-	    sun4)
-		echo sparc-sun-sunos${UNAME_RELEASE}
-		;;
-	esac
-	exit ;;
-    aushp:SunOS:*:*)
-	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit ;;
-    # The situation for MiNT is a little confusing.  The machine name
-    # can be virtually everything (everything which is not
-    # "atarist" or "atariste" at least should have a processor
-    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
-    # to the lowercase version "mint" (or "freemint").  Finally
-    # the system name "TOS" denotes a system which is actually not
-    # MiNT.  But MiNT is downward compatible to TOS, so this should
-    # be no problem.
-    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-	echo m68k-atari-mint${UNAME_RELEASE}
-	exit ;;
-    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
-	echo m68k-atari-mint${UNAME_RELEASE}
-	exit ;;
-    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-	echo m68k-atari-mint${UNAME_RELEASE}
-	exit ;;
-    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-	echo m68k-milan-mint${UNAME_RELEASE}
-	exit ;;
-    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-	echo m68k-hades-mint${UNAME_RELEASE}
-	exit ;;
-    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-	echo m68k-unknown-mint${UNAME_RELEASE}
-	exit ;;
-    m68k:machten:*:*)
-	echo m68k-apple-machten${UNAME_RELEASE}
-	exit ;;
-    powerpc:machten:*:*)
-	echo powerpc-apple-machten${UNAME_RELEASE}
-	exit ;;
-    RISC*:Mach:*:*)
-	echo mips-dec-mach_bsd4.3
-	exit ;;
-    RISC*:ULTRIX:*:*)
-	echo mips-dec-ultrix${UNAME_RELEASE}
-	exit ;;
-    VAX*:ULTRIX*:*:*)
-	echo vax-dec-ultrix${UNAME_RELEASE}
-	exit ;;
-    2020:CLIX:*:* | 2430:CLIX:*:*)
-	echo clipper-intergraph-clix${UNAME_RELEASE}
-	exit ;;
-    mips:*:*:UMIPS | mips:*:*:RISCos)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h>  /* for printf() prototype */
-	int main (int argc, char *argv[]) {
-#else
-	int main (argc, argv) int argc; char *argv[]; {
-#endif
-	#if defined (host_mips) && defined (MIPSEB)
-	#if defined (SYSTYPE_SYSV)
-	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_SVR4)
-	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
-	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
-	#endif
-	#endif
-	  exit (-1);
-	}
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c &&
-	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
-	  SYSTEM_NAME=`$dummy $dummyarg` &&
-	    { echo "$SYSTEM_NAME"; exit; }
-	echo mips-mips-riscos${UNAME_RELEASE}
-	exit ;;
-    Motorola:PowerMAX_OS:*:*)
-	echo powerpc-motorola-powermax
-	exit ;;
-    Motorola:*:4.3:PL8-*)
-	echo powerpc-harris-powermax
-	exit ;;
-    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
-	echo powerpc-harris-powermax
-	exit ;;
-    Night_Hawk:Power_UNIX:*:*)
-	echo powerpc-harris-powerunix
-	exit ;;
-    m88k:CX/UX:7*:*)
-	echo m88k-harris-cxux7
-	exit ;;
-    m88k:*:4*:R4*)
-	echo m88k-motorola-sysv4
-	exit ;;
-    m88k:*:3*:R3*)
-	echo m88k-motorola-sysv3
-	exit ;;
-    AViiON:dgux:*:*)
-	# DG/UX returns AViiON for all architectures
-	UNAME_PROCESSOR=`/usr/bin/uname -p`
-	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
-	then
-	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
-	       [ ${TARGET_BINARY_INTERFACE}x = x ]
-	    then
-		echo m88k-dg-dgux${UNAME_RELEASE}
-	    else
-		echo m88k-dg-dguxbcs${UNAME_RELEASE}
-	    fi
-	else
-	    echo i586-dg-dgux${UNAME_RELEASE}
-	fi
-	exit ;;
-    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
-	echo m88k-dolphin-sysv3
-	exit ;;
-    M88*:*:R3*:*)
-	# Delta 88k system running SVR3
-	echo m88k-motorola-sysv3
-	exit ;;
-    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
-	echo m88k-tektronix-sysv3
-	exit ;;
-    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
-	echo m68k-tektronix-bsd
-	exit ;;
-    *:IRIX*:*:*)
-	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-	exit ;;
-    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
-	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
-    i*86:AIX:*:*)
-	echo i386-ibm-aix
-	exit ;;
-    ia64:AIX:*:*)
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-	fi
-	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
-	exit ;;
-    *:AIX:2:3)
-	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-		eval $set_cc_for_build
-		sed 's/^		//' << EOF >$dummy.c
-		#include <sys/systemcfg.h>
-
-		main()
-			{
-			if (!__power_pc())
-				exit(1);
-			puts("powerpc-ibm-aix3.2.5");
-			exit(0);
-			}
-EOF
-		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
-		then
-			echo "$SYSTEM_NAME"
-		else
-			echo rs6000-ibm-aix3.2.5
-		fi
-	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
-		echo rs6000-ibm-aix3.2.4
-	else
-		echo rs6000-ibm-aix3.2
-	fi
-	exit ;;
-    *:AIX:*:[4567])
-	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
-	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
-		IBM_ARCH=rs6000
-	else
-		IBM_ARCH=powerpc
-	fi
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-	fi
-	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-	exit ;;
-    *:AIX:*:*)
-	echo rs6000-ibm-aix
-	exit ;;
-    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
-	echo romp-ibm-bsd4.4
-	exit ;;
-    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
-	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-	exit ;;                             # report: romp-ibm BSD 4.3
-    *:BOSX:*:*)
-	echo rs6000-bull-bosx
-	exit ;;
-    DPX/2?00:B.O.S.:*:*)
-	echo m68k-bull-sysv3
-	exit ;;
-    9000/[34]??:4.3bsd:1.*:*)
-	echo m68k-hp-bsd
-	exit ;;
-    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
-	echo m68k-hp-bsd4.4
-	exit ;;
-    9000/[34678]??:HP-UX:*:*)
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	case "${UNAME_MACHINE}" in
-	    9000/31? )            HP_ARCH=m68000 ;;
-	    9000/[34]?? )         HP_ARCH=m68k ;;
-	    9000/[678][0-9][0-9])
-		if [ -x /usr/bin/getconf ]; then
-		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-		    case "${sc_cpu_version}" in
-		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
-		      532)                      # CPU_PA_RISC2_0
-			case "${sc_kernel_bits}" in
-			  32) HP_ARCH="hppa2.0n" ;;
-			  64) HP_ARCH="hppa2.0w" ;;
-			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
-			esac ;;
-		    esac
-		fi
-		if [ "${HP_ARCH}" = "" ]; then
-		    eval $set_cc_for_build
-		    sed 's/^		//' << EOF >$dummy.c
-
-		#define _HPUX_SOURCE
-		#include <stdlib.h>
-		#include <unistd.h>
-
-		int main ()
-		{
-		#if defined(_SC_KERNEL_BITS)
-		    long bits = sysconf(_SC_KERNEL_BITS);
-		#endif
-		    long cpu  = sysconf (_SC_CPU_VERSION);
-
-		    switch (cpu)
-			{
-			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-			case CPU_PA_RISC2_0:
-		#if defined(_SC_KERNEL_BITS)
-			    switch (bits)
-				{
-				case 64: puts ("hppa2.0w"); break;
-				case 32: puts ("hppa2.0n"); break;
-				default: puts ("hppa2.0"); break;
-				} break;
-		#else  /* !defined(_SC_KERNEL_BITS) */
-			    puts ("hppa2.0"); break;
-		#endif
-			default: puts ("hppa1.0"); break;
-			}
-		    exit (0);
-		}
-EOF
-		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
-		    test -z "$HP_ARCH" && HP_ARCH=hppa
-		fi ;;
-	esac
-	if [ ${HP_ARCH} = "hppa2.0w" ]
-	then
-	    eval $set_cc_for_build
-
-	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
-	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
-	    # generating 64-bit code.  GNU and HP use different nomenclature:
-	    #
-	    # $ CC_FOR_BUILD=cc ./config.guess
-	    # => hppa2.0w-hp-hpux11.23
-	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
-	    # => hppa64-hp-hpux11.23
-
-	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
-		grep -q __LP64__
-	    then
-		HP_ARCH="hppa2.0w"
-	    else
-		HP_ARCH="hppa64"
-	    fi
-	fi
-	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-	exit ;;
-    ia64:HP-UX:*:*)
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	echo ia64-hp-hpux${HPUX_REV}
-	exit ;;
-    3050*:HI-UX:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <unistd.h>
-	int
-	main ()
-	{
-	  long cpu = sysconf (_SC_CPU_VERSION);
-	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
-	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
-	     results, however.  */
-	  if (CPU_IS_PA_RISC (cpu))
-	    {
-	      switch (cpu)
-		{
-		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
-		  default: puts ("hppa-hitachi-hiuxwe2"); break;
-		}
-	    }
-	  else if (CPU_IS_HP_MC68K (cpu))
-	    puts ("m68k-hitachi-hiuxwe2");
-	  else puts ("unknown-hitachi-hiuxwe2");
-	  exit (0);
-	}
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
-		{ echo "$SYSTEM_NAME"; exit; }
-	echo unknown-hitachi-hiuxwe2
-	exit ;;
-    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
-	echo hppa1.1-hp-bsd
-	exit ;;
-    9000/8??:4.3bsd:*:*)
-	echo hppa1.0-hp-bsd
-	exit ;;
-    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
-	echo hppa1.0-hp-mpeix
-	exit ;;
-    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
-	echo hppa1.1-hp-osf
-	exit ;;
-    hp8??:OSF1:*:*)
-	echo hppa1.0-hp-osf
-	exit ;;
-    i*86:OSF1:*:*)
-	if [ -x /usr/sbin/sysversion ] ; then
-	    echo ${UNAME_MACHINE}-unknown-osf1mk
-	else
-	    echo ${UNAME_MACHINE}-unknown-osf1
-	fi
-	exit ;;
-    parisc*:Lites*:*:*)
-	echo hppa1.1-hp-lites
-	exit ;;
-    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
-	echo c1-convex-bsd
-	exit ;;
-    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit ;;
-    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
-	echo c34-convex-bsd
-	exit ;;
-    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
-	echo c38-convex-bsd
-	exit ;;
-    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
-	echo c4-convex-bsd
-	exit ;;
-    CRAY*Y-MP:*:*:*)
-	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*[A-Z]90:*:*:*)
-	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
-	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-	      -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*TS:*:*:*)
-	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*T3E:*:*:*)
-	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*SV1:*:*:*)
-	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    *:UNICOS/mp:*:*)
-	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
-	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-	exit ;;
-    5000:UNIX_System_V:4.*:*)
-	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
-	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-	exit ;;
-    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
-	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-	exit ;;
-    sparc*:BSD/OS:*:*)
-	echo sparc-unknown-bsdi${UNAME_RELEASE}
-	exit ;;
-    *:BSD/OS:*:*)
-	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-	exit ;;
-    *:FreeBSD:*:*)
-	UNAME_PROCESSOR=`/usr/bin/uname -p`
-	case ${UNAME_PROCESSOR} in
-	    amd64)
-		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	    *)
-		echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	esac
-	exit ;;
-    i*:CYGWIN*:*)
-	echo ${UNAME_MACHINE}-pc-cygwin
-	exit ;;
-    *:MINGW*:*)
-	echo ${UNAME_MACHINE}-pc-mingw32
-	exit ;;
-    i*:MSYS*:*)
-	echo ${UNAME_MACHINE}-pc-msys
-	exit ;;
-    i*:windows32*:*)
-	# uname -m includes "-pc" on this system.
-	echo ${UNAME_MACHINE}-mingw32
-	exit ;;
-    i*:PW*:*)
-	echo ${UNAME_MACHINE}-pc-pw32
-	exit ;;
-    *:Interix*:*)
-	case ${UNAME_MACHINE} in
-	    x86)
-		echo i586-pc-interix${UNAME_RELEASE}
-		exit ;;
-	    authenticamd | genuineintel | EM64T)
-		echo x86_64-unknown-interix${UNAME_RELEASE}
-		exit ;;
-	    IA64)
-		echo ia64-unknown-interix${UNAME_RELEASE}
-		exit ;;
-	esac ;;
-    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
-	echo i${UNAME_MACHINE}-pc-mks
-	exit ;;
-    8664:Windows_NT:*)
-	echo x86_64-pc-mks
-	exit ;;
-    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
-	# UNAME_MACHINE based on the output of uname instead of i386?
-	echo i586-pc-interix
-	exit ;;
-    i*:UWIN*:*)
-	echo ${UNAME_MACHINE}-pc-uwin
-	exit ;;
-    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
-	echo x86_64-unknown-cygwin
-	exit ;;
-    p*:CYGWIN*:*)
-	echo powerpcle-unknown-cygwin
-	exit ;;
-    prep*:SunOS:5.*:*)
-	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    *:GNU:*:*)
-	# the GNU system
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-	exit ;;
-    *:GNU/*:*:*)
-	# other systems with GNU libc and userland
-	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
-	exit ;;
-    i*86:Minix:*:*)
-	echo ${UNAME_MACHINE}-pc-minix
-	exit ;;
-    aarch64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    aarch64_be:Linux:*:*)
-	UNAME_MACHINE=aarch64_be
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    alpha:Linux:*:*)
-	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-	  EV5)   UNAME_MACHINE=alphaev5 ;;
-	  EV56)  UNAME_MACHINE=alphaev56 ;;
-	  PCA56) UNAME_MACHINE=alphapca56 ;;
-	  PCA57) UNAME_MACHINE=alphapca56 ;;
-	  EV6)   UNAME_MACHINE=alphaev6 ;;
-	  EV67)  UNAME_MACHINE=alphaev67 ;;
-	  EV68*) UNAME_MACHINE=alphaev68 ;;
-	esac
-	objdump --private-headers /bin/sh | grep -q ld.so.1
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
-	exit ;;
-    arm*:Linux:*:*)
-	eval $set_cc_for_build
-	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
-	    | grep -q __ARM_EABI__
-	then
-	    echo ${UNAME_MACHINE}-unknown-linux-gnu
-	else
-	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
-		| grep -q __ARM_PCS_VFP
-	    then
-		echo ${UNAME_MACHINE}-unknown-linux-gnueabi
-	    else
-		echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
-	    fi
-	fi
-	exit ;;
-    avr32*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    cris:Linux:*:*)
-	echo ${UNAME_MACHINE}-axis-linux-gnu
-	exit ;;
-    crisv32:Linux:*:*)
-	echo ${UNAME_MACHINE}-axis-linux-gnu
-	exit ;;
-    frv:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    hexagon:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    i*86:Linux:*:*)
-	LIBC=gnu
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#ifdef __dietlibc__
-	LIBC=dietlibc
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
-	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
-	exit ;;
-    ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    mips:Linux:*:* | mips64:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef ${UNAME_MACHINE}
-	#undef ${UNAME_MACHINE}el
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=${UNAME_MACHINE}el
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=${UNAME_MACHINE}
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
-	;;
-    or32:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    padre:Linux:*:*)
-	echo sparc-unknown-linux-gnu
-	exit ;;
-    parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
-	exit ;;
-    parisc:Linux:*:* | hppa:Linux:*:*)
-	# Look for CPU level
-	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
-	esac
-	exit ;;
-    ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
-	exit ;;
-    ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
-	exit ;;
-    s390:Linux:*:* | s390x:Linux:*:*)
-	echo ${UNAME_MACHINE}-ibm-linux
-	exit ;;
-    sh64*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    tile*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    vax:Linux:*:*)
-	echo ${UNAME_MACHINE}-dec-linux-gnu
-	exit ;;
-    x86_64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    xtensa*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    i*86:DYNIX/ptx:4*:*)
-	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
-	# earlier versions are messed up and put the nodename in both
-	# sysname and nodename.
-	echo i386-sequent-sysv4
-	exit ;;
-    i*86:UNIX_SV:4.2MP:2.*)
-	# Unixware is an offshoot of SVR4, but it has its own version
-	# number series starting with 2...
-	# I am not positive that other SVR4 systems won't match this,
-	# I just have to hope.  -- rms.
-	# Use sysv4.2uw... so that sysv4* matches it.
-	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-	exit ;;
-    i*86:OS/2:*:*)
-	# If we were able to find `uname', then EMX Unix compatibility
-	# is probably installed.
-	echo ${UNAME_MACHINE}-pc-os2-emx
-	exit ;;
-    i*86:XTS-300:*:STOP)
-	echo ${UNAME_MACHINE}-unknown-stop
-	exit ;;
-    i*86:atheos:*:*)
-	echo ${UNAME_MACHINE}-unknown-atheos
-	exit ;;
-    i*86:syllable:*:*)
-	echo ${UNAME_MACHINE}-pc-syllable
-	exit ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
-	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    i*86:*DOS:*:*)
-	echo ${UNAME_MACHINE}-pc-msdosdjgpp
-	exit ;;
-    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
-	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
-	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
-	else
-		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
-	fi
-	exit ;;
-    i*86:*:5:[678]*)
-	# UnixWare 7.x, OpenUNIX and OpenServer 6.
-	case `/bin/uname -X | grep "^Machine"` in
-	    *486*)	     UNAME_MACHINE=i486 ;;
-	    *Pentium)	     UNAME_MACHINE=i586 ;;
-	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
-	esac
-	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
-	exit ;;
-    i*86:*:3.2:*)
-	if test -f /usr/options/cb.name; then
-		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
-	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
-		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
-		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
-			&& UNAME_MACHINE=i586
-		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
-	else
-		echo ${UNAME_MACHINE}-pc-sysv32
-	fi
-	exit ;;
-    pc:*:*:*)
-	# Left here for compatibility:
-	# uname -m prints for DJGPP always 'pc', but it prints nothing about
-	# the processor, so we play safe by assuming i586.
-	# Note: whatever this is, it MUST be the same as what config.sub
-	# prints for the "djgpp" host, or else GDB configury will decide that
-	# this is a cross-build.
-	echo i586-pc-msdosdjgpp
-	exit ;;
-    Intel:Mach:3*:*)
-	echo i386-pc-mach3
-	exit ;;
-    paragon:*:*:*)
-	echo i860-intel-osf1
-	exit ;;
-    i860:*:4.*:*) # i860-SVR4
-	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
-	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
-	else # Add other i860-SVR4 vendors below as they are discovered.
-	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
-	fi
-	exit ;;
-    mini*:CTIX:SYS*5:*)
-	# "miniframe"
-	echo m68010-convergent-sysv
-	exit ;;
-    mc68k:UNIX:SYSTEM5:3.51m)
-	echo m68k-convergent-sysv
-	exit ;;
-    M680?0:D-NIX:5.3:*)
-	echo m68k-diab-dnix
-	exit ;;
-    M68*:*:R3V[5678]*:*)
-	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
-    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
-	OS_REL=''
-	test -r /etc/.relid \
-	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
-    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && { echo i486-ncr-sysv4; exit; } ;;
-    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
-	OS_REL='.3'
-	test -r /etc/.relid \
-	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
-	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
-    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
-	echo m68k-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    mc68030:UNIX_System_V:4.*:*)
-	echo m68k-atari-sysv4
-	exit ;;
-    TSUNAMI:LynxOS:2.*:*)
-	echo sparc-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    rs6000:LynxOS:2.*:*)
-	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
-	echo powerpc-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    SM[BE]S:UNIX_SV:*:*)
-	echo mips-dde-sysv${UNAME_RELEASE}
-	exit ;;
-    RM*:ReliantUNIX-*:*:*)
-	echo mips-sni-sysv4
-	exit ;;
-    RM*:SINIX-*:*:*)
-	echo mips-sni-sysv4
-	exit ;;
-    *:SINIX-*:*:*)
-	if uname -p 2>/dev/null >/dev/null ; then
-		UNAME_MACHINE=`(uname -p) 2>/dev/null`
-		echo ${UNAME_MACHINE}-sni-sysv4
-	else
-		echo ns32k-sni-sysv
-	fi
-	exit ;;
-    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-			# says <[email protected]>
-	echo i586-unisys-sysv4
-	exit ;;
-    *:UNIX_System_V:4*:FTX*)
-	# From Gerald Hewes <[email protected]>.
-	# How about differentiating between stratus architectures? -djm
-	echo hppa1.1-stratus-sysv4
-	exit ;;
-    *:*:*:FTX*)
-	# From [email protected].
-	echo i860-stratus-sysv4
-	exit ;;
-    i*86:VOS:*:*)
-	# From [email protected].
-	echo ${UNAME_MACHINE}-stratus-vos
-	exit ;;
-    *:VOS:*:*)
-	# From [email protected].
-	echo hppa1.1-stratus-vos
-	exit ;;
-    mc68*:A/UX:*:*)
-	echo m68k-apple-aux${UNAME_RELEASE}
-	exit ;;
-    news*:NEWS-OS:6*:*)
-	echo mips-sony-newsos6
-	exit ;;
-    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
-	if [ -d /usr/nec ]; then
-		echo mips-nec-sysv${UNAME_RELEASE}
-	else
-		echo mips-unknown-sysv${UNAME_RELEASE}
-	fi
-	exit ;;
-    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
-	echo powerpc-be-beos
-	exit ;;
-    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
-	echo powerpc-apple-beos
-	exit ;;
-    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
-	echo i586-pc-beos
-	exit ;;
-    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
-	echo i586-pc-haiku
-	exit ;;
-    SX-4:SUPER-UX:*:*)
-	echo sx4-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-5:SUPER-UX:*:*)
-	echo sx5-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-6:SUPER-UX:*:*)
-	echo sx6-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-7:SUPER-UX:*:*)
-	echo sx7-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-8:SUPER-UX:*:*)
-	echo sx8-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-8R:SUPER-UX:*:*)
-	echo sx8r-nec-superux${UNAME_RELEASE}
-	exit ;;
-    Power*:Rhapsody:*:*)
-	echo powerpc-apple-rhapsody${UNAME_RELEASE}
-	exit ;;
-    *:Rhapsody:*:*)
-	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-	exit ;;
-    *:Darwin:*:*)
-	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	case $UNAME_PROCESSOR in
-	    i386)
-		eval $set_cc_for_build
-		if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
-		  if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
-		      (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
-		      grep IS_64BIT_ARCH >/dev/null
-		  then
-		      UNAME_PROCESSOR="x86_64"
-		  fi
-		fi ;;
-	    unknown) UNAME_PROCESSOR=powerpc ;;
-	esac
-	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
-	exit ;;
-    *:procnto*:*:* | *:QNX:[0123456789]*:*)
-	UNAME_PROCESSOR=`uname -p`
-	if test "$UNAME_PROCESSOR" = "x86"; then
-		UNAME_PROCESSOR=i386
-		UNAME_MACHINE=pc
-	fi
-	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
-	exit ;;
-    *:QNX:*:4*)
-	echo i386-pc-qnx
-	exit ;;
-    NEO-?:NONSTOP_KERNEL:*:*)
-	echo neo-tandem-nsk${UNAME_RELEASE}
-	exit ;;
-    NSE-?:NONSTOP_KERNEL:*:*)
-	echo nse-tandem-nsk${UNAME_RELEASE}
-	exit ;;
-    NSR-?:NONSTOP_KERNEL:*:*)
-	echo nsr-tandem-nsk${UNAME_RELEASE}
-	exit ;;
-    *:NonStop-UX:*:*)
-	echo mips-compaq-nonstopux
-	exit ;;
-    BS2000:POSIX*:*:*)
-	echo bs2000-siemens-sysv
-	exit ;;
-    DS/*:UNIX_System_V:*:*)
-	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
-	exit ;;
-    *:Plan9:*:*)
-	# "uname -m" is not consistent, so use $cputype instead. 386
-	# is converted to i386 for consistency with other x86
-	# operating systems.
-	if test "$cputype" = "386"; then
-	    UNAME_MACHINE=i386
-	else
-	    UNAME_MACHINE="$cputype"
-	fi
-	echo ${UNAME_MACHINE}-unknown-plan9
-	exit ;;
-    *:TOPS-10:*:*)
-	echo pdp10-unknown-tops10
-	exit ;;
-    *:TENEX:*:*)
-	echo pdp10-unknown-tenex
-	exit ;;
-    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
-	echo pdp10-dec-tops20
-	exit ;;
-    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
-	echo pdp10-xkl-tops20
-	exit ;;
-    *:TOPS-20:*:*)
-	echo pdp10-unknown-tops20
-	exit ;;
-    *:ITS:*:*)
-	echo pdp10-unknown-its
-	exit ;;
-    SEI:*:*:SEIUX)
-	echo mips-sei-seiux${UNAME_RELEASE}
-	exit ;;
-    *:DragonFly:*:*)
-	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-	exit ;;
-    *:*VMS:*:*)
-	UNAME_MACHINE=`(uname -p) 2>/dev/null`
-	case "${UNAME_MACHINE}" in
-	    A*) echo alpha-dec-vms ; exit ;;
-	    I*) echo ia64-dec-vms ; exit ;;
-	    V*) echo vax-dec-vms ; exit ;;
-	esac ;;
-    *:XENIX:*:SysV)
-	echo i386-pc-xenix
-	exit ;;
-    i*86:skyos:*:*)
-	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
-	exit ;;
-    i*86:rdos:*:*)
-	echo ${UNAME_MACHINE}-pc-rdos
-	exit ;;
-    i*86:AROS:*:*)
-	echo ${UNAME_MACHINE}-pc-aros
-	exit ;;
-    x86_64:VMkernel:*:*)
-	echo ${UNAME_MACHINE}-unknown-esx
-	exit ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-	"4"
-#else
-	""
-#endif
-	); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
-  printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  if (version < 4)
-    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  else
-    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-    struct utsname un;
-
-    uname(&un);
-
-    if (strncmp(un.version, "V2", 2) == 0) {
-	printf ("i386-sequent-ptx2\n"); exit (0);
-    }
-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-	printf ("i386-sequent-ptx1\n"); exit (0);
-    }
-    printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-#  include <sys/param.h>
-#  if defined (BSD)
-#   if BSD == 43
-      printf ("vax-dec-bsd4.3\n"); exit (0);
-#   else
-#    if BSD == 199006
-      printf ("vax-dec-bsd4.3reno\n"); exit (0);
-#    else
-      printf ("vax-dec-bsd\n"); exit (0);
-#    endif
-#   endif
-#  else
-    printf ("vax-dec-bsd\n"); exit (0);
-#  endif
-# else
-    printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
-  printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
-  exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
-	{ echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
-    case `getsysinfo -f cpu_type` in
-    c1*)
-	echo c1-convex-bsd
-	exit ;;
-    c2*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit ;;
-    c34*)
-	echo c34-convex-bsd
-	exit ;;
-    c38*)
-	echo c38-convex-bsd
-	exit ;;
-    c4*)
-	echo c4-convex-bsd
-	exit ;;
-    esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
-and
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <[email protected]> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo               = `(hostinfo) 2>/dev/null`
-/bin/universe          = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch              = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM  = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/components/external/SQLite-3.8.1/autoconf/config.sub b/components/external/SQLite-3.8.1/autoconf/config.sub
deleted file mode 100644
index c894da4550..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/config.sub
+++ /dev/null
@@ -1,1773 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011, 2012 Free Software Foundation, Inc.
-
-timestamp='2012-02-10'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Please send patches to <[email protected]>.  Submit a context
-# diff and a properly formatted GNU ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
-       $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <[email protected]>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help"
-       exit 1 ;;
-
-    *local*)
-       # First pass through any local machine types.
-       echo $1
-       exit ;;
-
-    * )
-       break ;;
-  esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
-    exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
-    exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
-  linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
-  knetbsd*-gnu* | netbsd*-gnu* | \
-  kopensolaris*-gnu* | \
-  storm-chaos* | os2-emx* | rtmk-nova*)
-    os=-$maybe_os
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
-    ;;
-  android-linux)
-    os=-linux-android
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
-    ;;
-  *)
-    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
-    if [ $basic_machine != $1 ]
-    then os=`echo $1 | sed 's/.*-/-/'`
-    else os=; fi
-    ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work.  We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
-	-sun*os*)
-		# Prevent following clause from handling this invalid input.
-		;;
-	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray | -microblaze)
-		os=
-		basic_machine=$1
-		;;
-	-bluegene*)
-		os=-cnk
-		;;
-	-sim | -cisco | -oki | -wec | -winbond)
-		os=
-		basic_machine=$1
-		;;
-	-scout)
-		;;
-	-wrs)
-		os=-vxworks
-		basic_machine=$1
-		;;
-	-chorusos*)
-		os=-chorusos
-		basic_machine=$1
-		;;
-	-chorusrdb)
-		os=-chorusrdb
-		basic_machine=$1
-		;;
-	-hiux*)
-		os=-hiuxwe2
-		;;
-	-sco6)
-		os=-sco5v6
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco5)
-		os=-sco3.2v5
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco4)
-		os=-sco3.2v4
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2.[4-9]*)
-		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2v[4-9]*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco5v6*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco*)
-		os=-sco3.2v2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-udk*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-isc)
-		os=-isc2.2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-clix*)
-		basic_machine=clipper-intergraph
-		;;
-	-isc*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-lynx*)
-		os=-lynxos
-		;;
-	-ptx*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
-		;;
-	-windowsnt*)
-		os=`echo $os | sed -e 's/windowsnt/winnt/'`
-		;;
-	-psos*)
-		os=-psos
-		;;
-	-mint | -mint[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
-	# Recognize the basic CPU types without company name.
-	# Some are omitted here because they have special meanings below.
-	1750a | 580 \
-	| a29k \
-	| aarch64 | aarch64_be \
-	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
-	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
-	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
-        | be32 | be64 \
-	| bfin \
-	| c4x | clipper \
-	| d10v | d30v | dlx | dsp16xx \
-	| epiphany \
-	| fido | fr30 | frv \
-	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
-	| hexagon \
-	| i370 | i860 | i960 | ia64 \
-	| ip2k | iq2000 \
-	| le32 | le64 \
-	| lm32 \
-	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore | mep | metag \
-	| mips | mipsbe | mipseb | mipsel | mipsle \
-	| mips16 \
-	| mips64 | mips64el \
-	| mips64octeon | mips64octeonel \
-	| mips64orion | mips64orionel \
-	| mips64r5900 | mips64r5900el \
-	| mips64vr | mips64vrel \
-	| mips64vr4100 | mips64vr4100el \
-	| mips64vr4300 | mips64vr4300el \
-	| mips64vr5000 | mips64vr5000el \
-	| mips64vr5900 | mips64vr5900el \
-	| mipsisa32 | mipsisa32el \
-	| mipsisa32r2 | mipsisa32r2el \
-	| mipsisa64 | mipsisa64el \
-	| mipsisa64r2 | mipsisa64r2el \
-	| mipsisa64sb1 | mipsisa64sb1el \
-	| mipsisa64sr71k | mipsisa64sr71kel \
-	| mipstx39 | mipstx39el \
-	| mn10200 | mn10300 \
-	| moxie \
-	| mt \
-	| msp430 \
-	| nds32 | nds32le | nds32be \
-	| nios | nios2 \
-	| ns16k | ns32k \
-	| open8 \
-	| or32 \
-	| pdp10 | pdp11 | pj | pjl \
-	| powerpc | powerpc64 | powerpc64le | powerpcle \
-	| pyramid \
-	| rl78 | rx \
-	| score \
-	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
-	| sh64 | sh64le \
-	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
-	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
-	| spu \
-	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
-	| ubicom32 \
-	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
-	| we32k \
-	| x86 | xc16x | xstormy16 | xtensa \
-	| z8k | z80)
-		basic_machine=$basic_machine-unknown
-		;;
-	c54x)
-		basic_machine=tic54x-unknown
-		;;
-	c55x)
-		basic_machine=tic55x-unknown
-		;;
-	c6x)
-		basic_machine=tic6x-unknown
-		;;
-	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
-		basic_machine=$basic_machine-unknown
-		os=-none
-		;;
-	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
-		;;
-	ms1)
-		basic_machine=mt-unknown
-		;;
-
-	strongarm | thumb | xscale)
-		basic_machine=arm-unknown
-		;;
-	xgate)
-		basic_machine=$basic_machine-unknown
-		os=-none
-		;;
-	xscaleeb)
-		basic_machine=armeb-unknown
-		;;
-
-	xscaleel)
-		basic_machine=armel-unknown
-		;;
-
-	# We use `pc' rather than `unknown'
-	# because (1) that's what they normally are, and
-	# (2) the word "unknown" tends to confuse beginning users.
-	i*86 | x86_64)
-	  basic_machine=$basic_machine-pc
-	  ;;
-	# Object if more than one company name word.
-	*-*-*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-	# Recognize the basic CPU types with company name.
-	580-* \
-	| a29k-* \
-	| aarch64-* | aarch64_be-* \
-	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
-	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
-	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* | avr32-* \
-	| be32-* | be64-* \
-	| bfin-* | bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* \
-	| clipper-* | craynv-* | cydra-* \
-	| d10v-* | d30v-* | dlx-* \
-	| elxsi-* \
-	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
-	| h8300-* | h8500-* \
-	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
-	| hexagon-* \
-	| i*86-* | i860-* | i960-* | ia64-* \
-	| ip2k-* | iq2000-* \
-	| le32-* | le64-* \
-	| lm32-* \
-	| m32c-* | m32r-* | m32rle-* \
-	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
-	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
-	| mips16-* \
-	| mips64-* | mips64el-* \
-	| mips64octeon-* | mips64octeonel-* \
-	| mips64orion-* | mips64orionel-* \
-	| mips64r5900-* | mips64r5900el-* \
-	| mips64vr-* | mips64vrel-* \
-	| mips64vr4100-* | mips64vr4100el-* \
-	| mips64vr4300-* | mips64vr4300el-* \
-	| mips64vr5000-* | mips64vr5000el-* \
-	| mips64vr5900-* | mips64vr5900el-* \
-	| mipsisa32-* | mipsisa32el-* \
-	| mipsisa32r2-* | mipsisa32r2el-* \
-	| mipsisa64-* | mipsisa64el-* \
-	| mipsisa64r2-* | mipsisa64r2el-* \
-	| mipsisa64sb1-* | mipsisa64sb1el-* \
-	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
-	| mipstx39-* | mipstx39el-* \
-	| mmix-* \
-	| mt-* \
-	| msp430-* \
-	| nds32-* | nds32le-* | nds32be-* \
-	| nios-* | nios2-* \
-	| none-* | np1-* | ns16k-* | ns32k-* \
-	| open8-* \
-	| orion-* \
-	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
-	| pyramid-* \
-	| rl78-* | romp-* | rs6000-* | rx-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
-	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
-	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
-	| tahoe-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
-	| tile*-* \
-	| tron-* \
-	| ubicom32-* \
-	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
-	| vax-* \
-	| we32k-* \
-	| x86-* | x86_64-* | xc16x-* | xps100-* \
-	| xstormy16-* | xtensa*-* \
-	| ymp-* \
-	| z8k-* | z80-*)
-		;;
-	# Recognize the basic CPU types without company name, with glob match.
-	xtensa*)
-		basic_machine=$basic_machine-unknown
-		;;
-	# Recognize the various machine names and aliases which stand
-	# for a CPU type and a company and sometimes even an OS.
-	386bsd)
-		basic_machine=i386-unknown
-		os=-bsd
-		;;
-	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
-		basic_machine=m68000-att
-		;;
-	3b*)
-		basic_machine=we32k-att
-		;;
-	a29khif)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	abacus)
-		basic_machine=abacus-unknown
-		;;
-	adobe68k)
-		basic_machine=m68010-adobe
-		os=-scout
-		;;
-	alliant | fx80)
-		basic_machine=fx80-alliant
-		;;
-	altos | altos3068)
-		basic_machine=m68k-altos
-		;;
-	am29k)
-		basic_machine=a29k-none
-		os=-bsd
-		;;
-	amd64)
-		basic_machine=x86_64-pc
-		;;
-	amd64-*)
-		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	amdahl)
-		basic_machine=580-amdahl
-		os=-sysv
-		;;
-	amiga | amiga-*)
-		basic_machine=m68k-unknown
-		;;
-	amigaos | amigados)
-		basic_machine=m68k-unknown
-		os=-amigaos
-		;;
-	amigaunix | amix)
-		basic_machine=m68k-unknown
-		os=-sysv4
-		;;
-	apollo68)
-		basic_machine=m68k-apollo
-		os=-sysv
-		;;
-	apollo68bsd)
-		basic_machine=m68k-apollo
-		os=-bsd
-		;;
-	aros)
-		basic_machine=i386-pc
-		os=-aros
-		;;
-	aux)
-		basic_machine=m68k-apple
-		os=-aux
-		;;
-	balance)
-		basic_machine=ns32k-sequent
-		os=-dynix
-		;;
-	blackfin)
-		basic_machine=bfin-unknown
-		os=-linux
-		;;
-	blackfin-*)
-		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	bluegene*)
-		basic_machine=powerpc-ibm
-		os=-cnk
-		;;
-	c54x-*)
-		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	c55x-*)
-		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	c6x-*)
-		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	c90)
-		basic_machine=c90-cray
-		os=-unicos
-		;;
-	cegcc)
-		basic_machine=arm-unknown
-		os=-cegcc
-		;;
-	convex-c1)
-		basic_machine=c1-convex
-		os=-bsd
-		;;
-	convex-c2)
-		basic_machine=c2-convex
-		os=-bsd
-		;;
-	convex-c32)
-		basic_machine=c32-convex
-		os=-bsd
-		;;
-	convex-c34)
-		basic_machine=c34-convex
-		os=-bsd
-		;;
-	convex-c38)
-		basic_machine=c38-convex
-		os=-bsd
-		;;
-	cray | j90)
-		basic_machine=j90-cray
-		os=-unicos
-		;;
-	craynv)
-		basic_machine=craynv-cray
-		os=-unicosmp
-		;;
-	cr16 | cr16-*)
-		basic_machine=cr16-unknown
-		os=-elf
-		;;
-	crds | unos)
-		basic_machine=m68k-crds
-		;;
-	crisv32 | crisv32-* | etraxfs*)
-		basic_machine=crisv32-axis
-		;;
-	cris | cris-* | etrax*)
-		basic_machine=cris-axis
-		;;
-	crx)
-		basic_machine=crx-unknown
-		os=-elf
-		;;
-	da30 | da30-*)
-		basic_machine=m68k-da30
-		;;
-	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
-		basic_machine=mips-dec
-		;;
-	decsystem10* | dec10*)
-		basic_machine=pdp10-dec
-		os=-tops10
-		;;
-	decsystem20* | dec20*)
-		basic_machine=pdp10-dec
-		os=-tops20
-		;;
-	delta | 3300 | motorola-3300 | motorola-delta \
-	      | 3300-motorola | delta-motorola)
-		basic_machine=m68k-motorola
-		;;
-	delta88)
-		basic_machine=m88k-motorola
-		os=-sysv3
-		;;
-	dicos)
-		basic_machine=i686-pc
-		os=-dicos
-		;;
-	djgpp)
-		basic_machine=i586-pc
-		os=-msdosdjgpp
-		;;
-	dpx20 | dpx20-*)
-		basic_machine=rs6000-bull
-		os=-bosx
-		;;
-	dpx2* | dpx2*-bull)
-		basic_machine=m68k-bull
-		os=-sysv3
-		;;
-	ebmon29k)
-		basic_machine=a29k-amd
-		os=-ebmon
-		;;
-	elxsi)
-		basic_machine=elxsi-elxsi
-		os=-bsd
-		;;
-	encore | umax | mmax)
-		basic_machine=ns32k-encore
-		;;
-	es1800 | OSE68k | ose68k | ose | OSE)
-		basic_machine=m68k-ericsson
-		os=-ose
-		;;
-	fx2800)
-		basic_machine=i860-alliant
-		;;
-	genix)
-		basic_machine=ns32k-ns
-		;;
-	gmicro)
-		basic_machine=tron-gmicro
-		os=-sysv
-		;;
-	go32)
-		basic_machine=i386-pc
-		os=-go32
-		;;
-	h3050r* | hiux*)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	h8300hms)
-		basic_machine=h8300-hitachi
-		os=-hms
-		;;
-	h8300xray)
-		basic_machine=h8300-hitachi
-		os=-xray
-		;;
-	h8500hms)
-		basic_machine=h8500-hitachi
-		os=-hms
-		;;
-	harris)
-		basic_machine=m88k-harris
-		os=-sysv3
-		;;
-	hp300-*)
-		basic_machine=m68k-hp
-		;;
-	hp300bsd)
-		basic_machine=m68k-hp
-		os=-bsd
-		;;
-	hp300hpux)
-		basic_machine=m68k-hp
-		os=-hpux
-		;;
-	hp3k9[0-9][0-9] | hp9[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k2[0-9][0-9] | hp9k31[0-9])
-		basic_machine=m68000-hp
-		;;
-	hp9k3[2-9][0-9])
-		basic_machine=m68k-hp
-		;;
-	hp9k6[0-9][0-9] | hp6[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k7[0-79][0-9] | hp7[0-79][0-9])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k78[0-9] | hp78[0-9])
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][13679] | hp8[0-9][13679])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][0-9] | hp8[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hppa-next)
-		os=-nextstep3
-		;;
-	hppaosf)
-		basic_machine=hppa1.1-hp
-		os=-osf
-		;;
-	hppro)
-		basic_machine=hppa1.1-hp
-		os=-proelf
-		;;
-	i370-ibm* | ibm*)
-		basic_machine=i370-ibm
-		;;
-	i*86v32)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv32
-		;;
-	i*86v4*)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv4
-		;;
-	i*86v)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv
-		;;
-	i*86sol2)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-solaris2
-		;;
-	i386mach)
-		basic_machine=i386-mach
-		os=-mach
-		;;
-	i386-vsta | vsta)
-		basic_machine=i386-unknown
-		os=-vsta
-		;;
-	iris | iris4d)
-		basic_machine=mips-sgi
-		case $os in
-		    -irix*)
-			;;
-		    *)
-			os=-irix4
-			;;
-		esac
-		;;
-	isi68 | isi)
-		basic_machine=m68k-isi
-		os=-sysv
-		;;
-	m68knommu)
-		basic_machine=m68k-unknown
-		os=-linux
-		;;
-	m68knommu-*)
-		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	m88k-omron*)
-		basic_machine=m88k-omron
-		;;
-	magnum | m3230)
-		basic_machine=mips-mips
-		os=-sysv
-		;;
-	merlin)
-		basic_machine=ns32k-utek
-		os=-sysv
-		;;
-	microblaze)
-		basic_machine=microblaze-xilinx
-		;;
-	mingw32)
-		basic_machine=i386-pc
-		os=-mingw32
-		;;
-	mingw32ce)
-		basic_machine=arm-unknown
-		os=-mingw32ce
-		;;
-	miniframe)
-		basic_machine=m68000-convergent
-		;;
-	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-	mips3*-*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
-		;;
-	mips3*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
-		;;
-	monitor)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	morphos)
-		basic_machine=powerpc-unknown
-		os=-morphos
-		;;
-	msdos)
-		basic_machine=i386-pc
-		os=-msdos
-		;;
-	ms1-*)
-		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
-		;;
-	msys)
-		basic_machine=i386-pc
-		os=-msys
-		;;
-	mvs)
-		basic_machine=i370-ibm
-		os=-mvs
-		;;
-	nacl)
-		basic_machine=le32-unknown
-		os=-nacl
-		;;
-	ncr3000)
-		basic_machine=i486-ncr
-		os=-sysv4
-		;;
-	netbsd386)
-		basic_machine=i386-unknown
-		os=-netbsd
-		;;
-	netwinder)
-		basic_machine=armv4l-rebel
-		os=-linux
-		;;
-	news | news700 | news800 | news900)
-		basic_machine=m68k-sony
-		os=-newsos
-		;;
-	news1000)
-		basic_machine=m68030-sony
-		os=-newsos
-		;;
-	news-3600 | risc-news)
-		basic_machine=mips-sony
-		os=-newsos
-		;;
-	necv70)
-		basic_machine=v70-nec
-		os=-sysv
-		;;
-	next | m*-next )
-		basic_machine=m68k-next
-		case $os in
-		    -nextstep* )
-			;;
-		    -ns2*)
-		      os=-nextstep2
-			;;
-		    *)
-		      os=-nextstep3
-			;;
-		esac
-		;;
-	nh3000)
-		basic_machine=m68k-harris
-		os=-cxux
-		;;
-	nh[45]000)
-		basic_machine=m88k-harris
-		os=-cxux
-		;;
-	nindy960)
-		basic_machine=i960-intel
-		os=-nindy
-		;;
-	mon960)
-		basic_machine=i960-intel
-		os=-mon960
-		;;
-	nonstopux)
-		basic_machine=mips-compaq
-		os=-nonstopux
-		;;
-	np1)
-		basic_machine=np1-gould
-		;;
-	neo-tandem)
-		basic_machine=neo-tandem
-		;;
-	nse-tandem)
-		basic_machine=nse-tandem
-		;;
-	nsr-tandem)
-		basic_machine=nsr-tandem
-		;;
-	op50n-* | op60c-*)
-		basic_machine=hppa1.1-oki
-		os=-proelf
-		;;
-	openrisc | openrisc-*)
-		basic_machine=or32-unknown
-		;;
-	os400)
-		basic_machine=powerpc-ibm
-		os=-os400
-		;;
-	OSE68000 | ose68000)
-		basic_machine=m68000-ericsson
-		os=-ose
-		;;
-	os68k)
-		basic_machine=m68k-none
-		os=-os68k
-		;;
-	pa-hitachi)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	paragon)
-		basic_machine=i860-intel
-		os=-osf
-		;;
-	parisc)
-		basic_machine=hppa-unknown
-		os=-linux
-		;;
-	parisc-*)
-		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	pbd)
-		basic_machine=sparc-tti
-		;;
-	pbb)
-		basic_machine=m68k-tti
-		;;
-	pc532 | pc532-*)
-		basic_machine=ns32k-pc532
-		;;
-	pc98)
-		basic_machine=i386-pc
-		;;
-	pc98-*)
-		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentium | p5 | k5 | k6 | nexgen | viac3)
-		basic_machine=i586-pc
-		;;
-	pentiumpro | p6 | 6x86 | athlon | athlon_*)
-		basic_machine=i686-pc
-		;;
-	pentiumii | pentium2 | pentiumiii | pentium3)
-		basic_machine=i686-pc
-		;;
-	pentium4)
-		basic_machine=i786-pc
-		;;
-	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
-		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumpro-* | p6-* | 6x86-* | athlon-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentium4-*)
-		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pn)
-		basic_machine=pn-gould
-		;;
-	power)	basic_machine=power-ibm
-		;;
-	ppc | ppcbe)	basic_machine=powerpc-unknown
-		;;
-	ppc-* | ppcbe-*)
-		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppcle | powerpclittle | ppc-le | powerpc-little)
-		basic_machine=powerpcle-unknown
-		;;
-	ppcle-* | powerpclittle-*)
-		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppc64)	basic_machine=powerpc64-unknown
-		;;
-	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
-		basic_machine=powerpc64le-unknown
-		;;
-	ppc64le-* | powerpc64little-*)
-		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ps2)
-		basic_machine=i386-ibm
-		;;
-	pw32)
-		basic_machine=i586-unknown
-		os=-pw32
-		;;
-	rdos)
-		basic_machine=i386-pc
-		os=-rdos
-		;;
-	rom68k)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	rm[46]00)
-		basic_machine=mips-siemens
-		;;
-	rtpc | rtpc-*)
-		basic_machine=romp-ibm
-		;;
-	s390 | s390-*)
-		basic_machine=s390-ibm
-		;;
-	s390x | s390x-*)
-		basic_machine=s390x-ibm
-		;;
-	sa29200)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	sb1)
-		basic_machine=mipsisa64sb1-unknown
-		;;
-	sb1el)
-		basic_machine=mipsisa64sb1el-unknown
-		;;
-	sde)
-		basic_machine=mipsisa32-sde
-		os=-elf
-		;;
-	sei)
-		basic_machine=mips-sei
-		os=-seiux
-		;;
-	sequent)
-		basic_machine=i386-sequent
-		;;
-	sh)
-		basic_machine=sh-hitachi
-		os=-hms
-		;;
-	sh5el)
-		basic_machine=sh5le-unknown
-		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
-	sparclite-wrs | simso-wrs)
-		basic_machine=sparclite-wrs
-		os=-vxworks
-		;;
-	sps7)
-		basic_machine=m68k-bull
-		os=-sysv2
-		;;
-	spur)
-		basic_machine=spur-unknown
-		;;
-	st2000)
-		basic_machine=m68k-tandem
-		;;
-	stratus)
-		basic_machine=i860-stratus
-		os=-sysv4
-		;;
-	strongarm-* | thumb-*)
-		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	sun2)
-		basic_machine=m68000-sun
-		;;
-	sun2os3)
-		basic_machine=m68000-sun
-		os=-sunos3
-		;;
-	sun2os4)
-		basic_machine=m68000-sun
-		os=-sunos4
-		;;
-	sun3os3)
-		basic_machine=m68k-sun
-		os=-sunos3
-		;;
-	sun3os4)
-		basic_machine=m68k-sun
-		os=-sunos4
-		;;
-	sun4os3)
-		basic_machine=sparc-sun
-		os=-sunos3
-		;;
-	sun4os4)
-		basic_machine=sparc-sun
-		os=-sunos4
-		;;
-	sun4sol2)
-		basic_machine=sparc-sun
-		os=-solaris2
-		;;
-	sun3 | sun3-*)
-		basic_machine=m68k-sun
-		;;
-	sun4)
-		basic_machine=sparc-sun
-		;;
-	sun386 | sun386i | roadrunner)
-		basic_machine=i386-sun
-		;;
-	sv1)
-		basic_machine=sv1-cray
-		os=-unicos
-		;;
-	symmetry)
-		basic_machine=i386-sequent
-		os=-dynix
-		;;
-	t3e)
-		basic_machine=alphaev5-cray
-		os=-unicos
-		;;
-	t90)
-		basic_machine=t90-cray
-		os=-unicos
-		;;
-	tile*)
-		basic_machine=$basic_machine-unknown
-		os=-linux-gnu
-		;;
-	tx39)
-		basic_machine=mipstx39-unknown
-		;;
-	tx39el)
-		basic_machine=mipstx39el-unknown
-		;;
-	toad1)
-		basic_machine=pdp10-xkl
-		os=-tops20
-		;;
-	tower | tower-32)
-		basic_machine=m68k-ncr
-		;;
-	tpf)
-		basic_machine=s390x-ibm
-		os=-tpf
-		;;
-	udi29k)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	ultra3)
-		basic_machine=a29k-nyu
-		os=-sym1
-		;;
-	v810 | necv810)
-		basic_machine=v810-nec
-		os=-none
-		;;
-	vaxv)
-		basic_machine=vax-dec
-		os=-sysv
-		;;
-	vms)
-		basic_machine=vax-dec
-		os=-vms
-		;;
-	vpp*|vx|vx-*)
-		basic_machine=f301-fujitsu
-		;;
-	vxworks960)
-		basic_machine=i960-wrs
-		os=-vxworks
-		;;
-	vxworks68)
-		basic_machine=m68k-wrs
-		os=-vxworks
-		;;
-	vxworks29k)
-		basic_machine=a29k-wrs
-		os=-vxworks
-		;;
-	w65*)
-		basic_machine=w65-wdc
-		os=-none
-		;;
-	w89k-*)
-		basic_machine=hppa1.1-winbond
-		os=-proelf
-		;;
-	xbox)
-		basic_machine=i686-pc
-		os=-mingw32
-		;;
-	xps | xps100)
-		basic_machine=xps100-honeywell
-		;;
-	xscale-* | xscalee[bl]-*)
-		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
-		;;
-	ymp)
-		basic_machine=ymp-cray
-		os=-unicos
-		;;
-	z8k-*-coff)
-		basic_machine=z8k-unknown
-		os=-sim
-		;;
-	z80-*-coff)
-		basic_machine=z80-unknown
-		os=-sim
-		;;
-	none)
-		basic_machine=none-none
-		os=-none
-		;;
-
-# Here we handle the default manufacturer of certain CPU types.  It is in
-# some cases the only manufacturer, in others, it is the most popular.
-	w89k)
-		basic_machine=hppa1.1-winbond
-		;;
-	op50n)
-		basic_machine=hppa1.1-oki
-		;;
-	op60c)
-		basic_machine=hppa1.1-oki
-		;;
-	romp)
-		basic_machine=romp-ibm
-		;;
-	mmix)
-		basic_machine=mmix-knuth
-		;;
-	rs6000)
-		basic_machine=rs6000-ibm
-		;;
-	vax)
-		basic_machine=vax-dec
-		;;
-	pdp10)
-		# there are many clones, so DEC is not a safe bet
-		basic_machine=pdp10-unknown
-		;;
-	pdp11)
-		basic_machine=pdp11-dec
-		;;
-	we32k)
-		basic_machine=we32k-att
-		;;
-	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
-		basic_machine=sh-unknown
-		;;
-	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
-		basic_machine=sparc-sun
-		;;
-	cydra)
-		basic_machine=cydra-cydrome
-		;;
-	orion)
-		basic_machine=orion-highlevel
-		;;
-	orion105)
-		basic_machine=clipper-highlevel
-		;;
-	mac | mpw | mac-mpw)
-		basic_machine=m68k-apple
-		;;
-	pmac | pmac-mpw)
-		basic_machine=powerpc-apple
-		;;
-	*-unknown)
-		# Make sure to match an already-canonicalized machine name.
-		;;
-	*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
-	*-digital*)
-		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
-		;;
-	*-commodore*)
-		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
-		;;
-	*)
-		;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
-	# First match some system type aliases
-	# that might get confused with valid system types.
-	# -solaris* is a basic system type, with this one exception.
-	-auroraux)
-		os=-auroraux
-		;;
-	-solaris1 | -solaris1.*)
-		os=`echo $os | sed -e 's|solaris1|sunos4|'`
-		;;
-	-solaris)
-		os=-solaris2
-		;;
-	-svr4*)
-		os=-sysv4
-		;;
-	-unixware*)
-		os=-sysv4.2uw
-		;;
-	-gnu/linux*)
-		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
-		;;
-	# First accept the basic system types.
-	# The portable systems comes first.
-	# Each alternative MUST END IN A *, to match a version number.
-	# -sysv* is not here because it comes later, after sysvr4.
-	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
-	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
-	      | -sym* | -kopensolaris* \
-	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* | -aros* \
-	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
-	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -openbsd* | -solidbsd* \
-	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
-	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
-	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
-	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* | -cegcc* \
-	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-android* \
-	      | -linux-newlib* | -linux-uclibc* \
-	      | -uxpv* | -beos* | -mpeix* | -udk* \
-	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
-	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
-	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
-	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
-	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
-	# Remember, each alternative MUST END IN *, to match a version number.
-		;;
-	-qnx*)
-		case $basic_machine in
-		    x86-* | i*86-*)
-			;;
-		    *)
-			os=-nto$os
-			;;
-		esac
-		;;
-	-nto-qnx*)
-		;;
-	-nto*)
-		os=`echo $os | sed -e 's|nto|nto-qnx|'`
-		;;
-	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
-	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
-		;;
-	-mac*)
-		os=`echo $os | sed -e 's|mac|macos|'`
-		;;
-	-linux-dietlibc)
-		os=-linux-dietlibc
-		;;
-	-linux*)
-		os=`echo $os | sed -e 's|linux|linux-gnu|'`
-		;;
-	-sunos5*)
-		os=`echo $os | sed -e 's|sunos5|solaris2|'`
-		;;
-	-sunos6*)
-		os=`echo $os | sed -e 's|sunos6|solaris3|'`
-		;;
-	-opened*)
-		os=-openedition
-		;;
-	-os400*)
-		os=-os400
-		;;
-	-wince*)
-		os=-wince
-		;;
-	-osfrose*)
-		os=-osfrose
-		;;
-	-osf*)
-		os=-osf
-		;;
-	-utek*)
-		os=-bsd
-		;;
-	-dynix*)
-		os=-bsd
-		;;
-	-acis*)
-		os=-aos
-		;;
-	-atheos*)
-		os=-atheos
-		;;
-	-syllable*)
-		os=-syllable
-		;;
-	-386bsd)
-		os=-bsd
-		;;
-	-ctix* | -uts*)
-		os=-sysv
-		;;
-	-nova*)
-		os=-rtmk-nova
-		;;
-	-ns2 )
-		os=-nextstep2
-		;;
-	-nsk*)
-		os=-nsk
-		;;
-	# Preserve the version number of sinix5.
-	-sinix5.*)
-		os=`echo $os | sed -e 's|sinix|sysv|'`
-		;;
-	-sinix*)
-		os=-sysv4
-		;;
-	-tpf*)
-		os=-tpf
-		;;
-	-triton*)
-		os=-sysv3
-		;;
-	-oss*)
-		os=-sysv3
-		;;
-	-svr4)
-		os=-sysv4
-		;;
-	-svr3)
-		os=-sysv3
-		;;
-	-sysvr4)
-		os=-sysv4
-		;;
-	# This must come after -sysvr4.
-	-sysv*)
-		;;
-	-ose*)
-		os=-ose
-		;;
-	-es1800*)
-		os=-ose
-		;;
-	-xenix)
-		os=-xenix
-		;;
-	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-		os=-mint
-		;;
-	-aros*)
-		os=-aros
-		;;
-	-kaos*)
-		os=-kaos
-		;;
-	-zvmoe)
-		os=-zvmoe
-		;;
-	-dicos*)
-		os=-dicos
-		;;
-	-nacl*)
-		;;
-	-none)
-		;;
-	*)
-		# Get rid of the `-' at the beginning of $os.
-		os=`echo $os | sed 's/[^-]*-//'`
-		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
-		exit 1
-		;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system.  Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
-	score-*)
-		os=-elf
-		;;
-	spu-*)
-		os=-elf
-		;;
-	*-acorn)
-		os=-riscix1.2
-		;;
-	arm*-rebel)
-		os=-linux
-		;;
-	arm*-semi)
-		os=-aout
-		;;
-	c4x-* | tic4x-*)
-		os=-coff
-		;;
-	tic54x-*)
-		os=-coff
-		;;
-	tic55x-*)
-		os=-coff
-		;;
-	tic6x-*)
-		os=-coff
-		;;
-	# This must come before the *-dec entry.
-	pdp10-*)
-		os=-tops20
-		;;
-	pdp11-*)
-		os=-none
-		;;
-	*-dec | vax-*)
-		os=-ultrix4.2
-		;;
-	m68*-apollo)
-		os=-domain
-		;;
-	i386-sun)
-		os=-sunos4.0.2
-		;;
-	m68000-sun)
-		os=-sunos3
-		;;
-	m68*-cisco)
-		os=-aout
-		;;
-	mep-*)
-		os=-elf
-		;;
-	mips*-cisco)
-		os=-elf
-		;;
-	mips*-*)
-		os=-elf
-		;;
-	or32-*)
-		os=-coff
-		;;
-	*-tti)	# must be before sparc entry or we get the wrong os.
-		os=-sysv3
-		;;
-	sparc-* | *-sun)
-		os=-sunos4.1.1
-		;;
-	*-be)
-		os=-beos
-		;;
-	*-haiku)
-		os=-haiku
-		;;
-	*-ibm)
-		os=-aix
-		;;
-	*-knuth)
-		os=-mmixware
-		;;
-	*-wec)
-		os=-proelf
-		;;
-	*-winbond)
-		os=-proelf
-		;;
-	*-oki)
-		os=-proelf
-		;;
-	*-hp)
-		os=-hpux
-		;;
-	*-hitachi)
-		os=-hiux
-		;;
-	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
-		os=-sysv
-		;;
-	*-cbm)
-		os=-amigaos
-		;;
-	*-dg)
-		os=-dgux
-		;;
-	*-dolphin)
-		os=-sysv3
-		;;
-	m68k-ccur)
-		os=-rtu
-		;;
-	m88k-omron*)
-		os=-luna
-		;;
-	*-next )
-		os=-nextstep
-		;;
-	*-sequent)
-		os=-ptx
-		;;
-	*-crds)
-		os=-unos
-		;;
-	*-ns)
-		os=-genix
-		;;
-	i370-*)
-		os=-mvs
-		;;
-	*-next)
-		os=-nextstep3
-		;;
-	*-gould)
-		os=-sysv
-		;;
-	*-highlevel)
-		os=-bsd
-		;;
-	*-encore)
-		os=-bsd
-		;;
-	*-sgi)
-		os=-irix
-		;;
-	*-siemens)
-		os=-sysv4
-		;;
-	*-masscomp)
-		os=-rtu
-		;;
-	f30[01]-fujitsu | f700-fujitsu)
-		os=-uxpv
-		;;
-	*-rom68k)
-		os=-coff
-		;;
-	*-*bug)
-		os=-coff
-		;;
-	*-apple)
-		os=-macos
-		;;
-	*-atari*)
-		os=-mint
-		;;
-	*)
-		os=-none
-		;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer.  We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
-	*-unknown)
-		case $os in
-			-riscix*)
-				vendor=acorn
-				;;
-			-sunos*)
-				vendor=sun
-				;;
-			-cnk*|-aix*)
-				vendor=ibm
-				;;
-			-beos*)
-				vendor=be
-				;;
-			-hpux*)
-				vendor=hp
-				;;
-			-mpeix*)
-				vendor=hp
-				;;
-			-hiux*)
-				vendor=hitachi
-				;;
-			-unos*)
-				vendor=crds
-				;;
-			-dgux*)
-				vendor=dg
-				;;
-			-luna*)
-				vendor=omron
-				;;
-			-genix*)
-				vendor=ns
-				;;
-			-mvs* | -opened*)
-				vendor=ibm
-				;;
-			-os400*)
-				vendor=ibm
-				;;
-			-ptx*)
-				vendor=sequent
-				;;
-			-tpf*)
-				vendor=ibm
-				;;
-			-vxsim* | -vxworks* | -windiss*)
-				vendor=wrs
-				;;
-			-aux*)
-				vendor=apple
-				;;
-			-hms*)
-				vendor=hitachi
-				;;
-			-mpw* | -macos*)
-				vendor=apple
-				;;
-			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-				vendor=atari
-				;;
-			-vos*)
-				vendor=stratus
-				;;
-		esac
-		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
-		;;
-esac
-
-echo $basic_machine$os
-exit
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/components/external/SQLite-3.8.1/autoconf/configure.ac b/components/external/SQLite-3.8.1/autoconf/configure.ac
deleted file mode 100644
index 46b6563edc..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/configure.ac
+++ /dev/null
@@ -1,108 +0,0 @@
-
-#-----------------------------------------------------------------------
-# Supports the following non-standard switches.
-#
-#   --enable-threadsafe
-#   --enable-readline
-#   --enable-dynamic-extensions
-#
-
-AC_PREREQ(2.61)
-AC_INIT(sqlite, 3.7.5, http://www.sqlite.org)
-AC_CONFIG_SRCDIR([sqlite3.c])
-
-# Use automake.
-AM_INIT_AUTOMAKE([foreign])
-
-AC_SYS_LARGEFILE
-
-# Check for required programs.
-AC_PROG_CC
-AC_PROG_RANLIB
-AC_PROG_LIBTOOL
-AC_PROG_MKDIR_P
-
-# Check for library functions that SQLite can optionally use.
-AC_CHECK_FUNCS([fdatasync usleep fullfsync localtime_r gmtime_r])
-AC_FUNC_STRERROR_R
-
-AC_CONFIG_FILES([Makefile sqlite3.pc])
-AC_SUBST(BUILD_CFLAGS)
-
-#-----------------------------------------------------------------------
-#   --enable-readline
-#
-AC_ARG_ENABLE(readline, [AS_HELP_STRING(
-  [--enable-readline], 
-  [use readline in shell tool (yes, no) [default=yes]])], 
-  [], [enable_readline=yes])
-if test x"$enable_readline" != xno ; then
-  sLIBS=$LIBS
-  LIBS=""
-  AC_SEARCH_LIBS(tgetent, curses ncurses ncursesw, [], [])
-  AC_SEARCH_LIBS(readline, readline, [], [enable_readline=no])
-  AC_CHECK_FUNCS(readline, [], [])
-  READLINE_LIBS=$LIBS
-  LIBS=$sLIBS
-fi
-AC_SUBST(READLINE_LIBS)
-#-----------------------------------------------------------------------
-
-#-----------------------------------------------------------------------
-#   --enable-threadsafe
-#
-AC_ARG_ENABLE(threadsafe, [AS_HELP_STRING(
-  [--enable-threadsafe], [build a thread-safe library [default=yes]])], 
-  [], [enable_threadsafe=yes])
-THREADSAFE_FLAGS=-DSQLITE_THREADSAFE=0
-if test x"$enable_threadsafe" != "xno"; then
-  THREADSAFE_FLAGS="-D_REENTRANT=1 -DSQLITE_THREADSAFE=1"
-  AC_SEARCH_LIBS(pthread_create, pthread)
-fi
-AC_SUBST(THREADSAFE_FLAGS)
-#-----------------------------------------------------------------------
-
-#-----------------------------------------------------------------------
-#   --enable-dynamic-extensions
-#
-AC_ARG_ENABLE(dynamic-extensions, [AS_HELP_STRING(
-  [--enable-dynamic-extensions], [support loadable extensions [default=yes]])], 
-  [], [enable_dynamic_extensions=yes])
-if test x"$enable_dynamic_extensions" != "xno"; then
-  AC_SEARCH_LIBS(dlopen, dl)
-else
-  DYNAMIC_EXTENSION_FLAGS=-DSQLITE_OMIT_LOAD_EXTENSION=1
-fi
-AC_MSG_CHECKING([for whether to support dynamic extensions])
-AC_MSG_RESULT($enable_dynamic_extensions)
-AC_SUBST(DYNAMIC_EXTENSION_FLAGS)
-#-----------------------------------------------------------------------
-
-AC_CHECK_FUNCS(posix_fallocate)
-
-#-----------------------------------------------------------------------
-# UPDATE: Maybe it's better if users just set CFLAGS before invoking
-# configure. This option doesn't really add much...
-#
-#   --enable-tempstore
-#
-# AC_ARG_ENABLE(tempstore, [AS_HELP_STRING(
-#   [--enable-tempstore], 
-#   [in-memory temporary tables (never, no, yes, always) [default=no]])], 
-#   [], [enable_tempstore=no])
-# AC_MSG_CHECKING([for whether or not to store temp tables in-memory])
-# case "$enable_tempstore" in
-#   never )  TEMP_STORE=0 ;;
-#   no )     TEMP_STORE=1 ;;
-#   always ) TEMP_STORE=3 ;;
-#   yes )    TEMP_STORE=3 ;;
-#   * )
-#     TEMP_STORE=1
-#     enable_tempstore=yes
-#   ;;
-# esac
-# AC_MSG_RESULT($enable_tempstore)
-# AC_SUBST(TEMP_STORE)
-#-----------------------------------------------------------------------
-
-AC_OUTPUT
diff --git a/components/external/SQLite-3.8.1/autoconf/depcomp b/components/external/SQLite-3.8.1/autoconf/depcomp
deleted file mode 100644
index 25a39e6cd5..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/depcomp
+++ /dev/null
@@ -1,708 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2012-03-27.16; # UTC
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <[email protected]>.
-
-case $1 in
-  '')
-     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
-  depmode     Dependency tracking mode.
-  source      Source file read by 'PROGRAMS ARGS'.
-  object      Object file output by 'PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
-  depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputting dependencies.
-  libtool     Whether libtool is used (yes/no).
-
-Report bugs to <[email protected]>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "depcomp $scriptversion"
-    exit $?
-    ;;
-esac
-
-# A tabulation character.
-tab='	'
-# A newline character.
-nl='
-'
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
-   # This is just like msvisualcpp but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u='sed s,\\\\,/,g'
-   depmode=msvisualcpp
-fi
-
-if test "$depmode" = msvc7msys; then
-   # This is just like msvc7 but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u='sed s,\\\\,/,g'
-   depmode=msvc7
-fi
-
-if test "$depmode" = xlc; then
-   # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
-   gccflag=-qmakedep=gcc,-MF
-   depmode=gcc
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am.  Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
-  for arg
-  do
-    case $arg in
-    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
-    *)  set fnord "$@" "$arg" ;;
-    esac
-    shift # fnord
-    shift # $arg
-  done
-  "$@"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the "deleted header file" problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' "$nl" < "$tmpdepfile" |
-## Some versions of gcc put a space before the ':'.  On the theory
-## that the space means something, we add a space to the output as
-## well.  hp depmode also adds that space, but also prefixes the VPATH
-## to the object.  Take care to not repeat it in the output.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
-      | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like '#:fec' to the end of the
-    # dependency line.
-    tr ' ' "$nl" < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr "$nl" ' ' >> "$depfile"
-    echo >> "$depfile"
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' "$nl" < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-xlc)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts '$object:' at the
-  # start of each line; $object doesn't have directory information.
-  # Version 6 uses the directory in both cases.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$base.u
-    tmpdepfile3=$dir.libs/$base.u
-    "$@" -Wc,-M
-  else
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$dir$base.u
-    tmpdepfile3=$dir$base.u
-    "$@" -M
-  fi
-  stat=$?
-
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-    exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form 'foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # '$object: dependent.h' and one to simply 'dependent.h:'.
-    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-icc)
-  # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
-  # However on
-  #    $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using '\':
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-  # tcc 0.9.26 (FIXME still under development at the moment of writing)
-  # will emit a similar output, but also prepend the continuation lines
-  # with horizontal tabulation characters.
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form 'foo.o: dependent.h',
-  # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
-  # Do two passes, one to just change these to
-  # '$object: dependent.h' and one to simply 'dependent.h:'.
-  sed -e "s/^[ $tab][ $tab]*/  /" -e "s,^[^:]*:,$object :," \
-    < "$tmpdepfile" > "$depfile"
-  sed '
-    s/[ '"$tab"'][ '"$tab"']*/ /g
-    s/^ *//
-    s/ *\\*$//
-    s/^[^:]*: *//
-    /^$/d
-    /:$/d
-    s/$/ :/
-  ' < "$tmpdepfile" >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp2)
-  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
-  # compilers, which have integrated preprocessors.  The correct option
-  # to use with these is +Maked; it writes dependencies to a file named
-  # 'foo.d', which lands next to the object file, wherever that
-  # happens to be.
-  # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir.libs/$base.d
-    "$@" -Wc,+Maked
-  else
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir$base.d
-    "$@" +Maked
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-     rm -f "$tmpdepfile1" "$tmpdepfile2"
-     exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add 'dependent.h:' lines.
-    sed -ne '2,${
-	       s/^ *//
-	       s/ \\*$//
-	       s/$/:/
-	       p
-	     }' "$tmpdepfile" >> "$depfile"
-  else
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile" "$tmpdepfile2"
-  ;;
-
-tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in 'foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
-
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-msvc7)
-  if test "$libtool" = yes; then
-    showIncludes=-Wc,-showIncludes
-  else
-    showIncludes=-showIncludes
-  fi
-  "$@" $showIncludes > "$tmpdepfile"
-  stat=$?
-  grep -v '^Note: including file: ' "$tmpdepfile"
-  if test "$stat" = 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  # The first sed program below extracts the file names and escapes
-  # backslashes for cygpath.  The second sed program outputs the file
-  # name when reading, but also accumulates all include files in the
-  # hold buffer in order to output them again at the end.  This only
-  # works with sed implementations that can handle large buffers.
-  sed < "$tmpdepfile" -n '
-/^Note: including file:  *\(.*\)/ {
-  s//\1/
-  s/\\/\\\\/g
-  p
-}' | $cygpath_u | sort -u | sed -n '
-s/ /\\ /g
-s/\(.*\)/'"$tab"'\1 \\/p
-s/.\(.*\) \\/\1:/
-H
-$ {
-  s/.*/'"$tab"'/
-  G
-  p
-}' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvc7msys)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove '-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for ':'
-  # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
-  "$@" $dashmflag |
-    sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' "$nl" < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # Remove any Libtool call
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-  # X makedepend
-  shift
-  cleared=no eat=no
-  for arg
-  do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    if test $eat = yes; then
-      eat=no
-      continue
-    fi
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    # Strip any option that makedepend may not understand.  Remove
-    # the object too, otherwise makedepend will parse it as a source file.
-    -arch)
-      eat=yes ;;
-    -*|$object)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix=`echo "$object" | sed 's/^.*\././'`
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  # makedepend may prepend the VPATH from the source file name to the object.
-  # No need to regex-escape $object, excess matching of '.' is harmless.
-  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove '-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
-    *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
-    esac
-  done
-  "$@" -E 2>/dev/null |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
-  echo "$tab" >> "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvcmsys)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/components/external/SQLite-3.8.1/autoconf/install-sh b/components/external/SQLite-3.8.1/autoconf/install-sh
deleted file mode 100644
index a9244eb078..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/install-sh
+++ /dev/null
@@ -1,527 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2011-01-19.21; # UTC
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" ""	$nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit=${DOITPROG-}
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_glob='?'
-initialize_posix_glob='
-  test "$posix_glob" != "?" || {
-    if (set -f) 2>/dev/null; then
-      posix_glob=
-    else
-      posix_glob=:
-    fi
-  }
-'
-
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
-
-src=
-dst=
-dir_arg=
-dst_arg=
-
-copy_on_change=false
-no_target_directory=
-
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
-     --help     display this help and exit.
-     --version  display version info and exit.
-
-  -c            (ignored)
-  -C            install only if different (preserve the last data modification time)
-  -d            create directories instead of installing files.
-  -g GROUP      $chgrpprog installed files to GROUP.
-  -m MODE       $chmodprog installed files to MODE.
-  -o USER       $chownprog installed files to USER.
-  -s            $stripprog installed files.
-  -t DIRECTORY  install into DIRECTORY.
-  -T            report an error if DSTFILE is a directory.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
-  RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
-  case $1 in
-    -c) ;;
-
-    -C) copy_on_change=true;;
-
-    -d) dir_arg=true;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-	shift;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *'['*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-	shift;;
-
-    -o) chowncmd="$chownprog $2"
-	shift;;
-
-    -s) stripcmd=$stripprog;;
-
-    -t) dst_arg=$2
-	# Protect names problematic for `test' and other utilities.
-	case $dst_arg in
-	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
-	esac
-	shift;;
-
-    -T) no_target_directory=true;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    --)	shift
-	break;;
-
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
-
-    *)  break;;
-  esac
-  shift
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dst_arg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dst_arg"
-      shift # fnord
-    fi
-    shift # arg
-    dst_arg=$arg
-    # Protect names problematic for `test' and other utilities.
-    case $dst_arg in
-      -* | [=\(\)!]) dst_arg=./$dst_arg;;
-    esac
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-if test -z "$dir_arg"; then
-  do_exit='(exit $ret); exit $ret'
-  trap "ret=129; $do_exit" 1
-  trap "ret=130; $do_exit" 2
-  trap "ret=141; $do_exit" 13
-  trap "ret=143; $do_exit" 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
-for src
-do
-  # Protect names problematic for `test' and other utilities.
-  case $src in
-    -* | [=\(\)!]) src=./$src;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dst_arg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-    dst=$dst_arg
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dst_arg: Is a directory" >&2
-	exit 1
-      fi
-      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
-      dstdir_status=0
-    else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
-	  *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
-    esac
-
-    if
-      $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-	/*) prefix='/';;
-	[-=\(\)!]*) prefix='./';;
-	*)  prefix='';;
-      esac
-
-      eval "$initialize_posix_glob"
-
-      oIFS=$IFS
-      IFS=/
-      $posix_glob set -f
-      set fnord $dstdir
-      shift
-      $posix_glob set +f
-      IFS=$oIFS
-
-      prefixes=
-
-      for d
-      do
-	test X"$d" = X && continue
-
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
-    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
-    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # If -C, don't bother to copy if it wouldn't change the file.
-    if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
-
-       eval "$initialize_posix_glob" &&
-       $posix_glob set -f &&
-       set X $old && old=:$2:$4:$5:$6 &&
-       set X $new && new=:$2:$4:$5:$6 &&
-       $posix_glob set +f &&
-
-       test "$old" = "$new" &&
-       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
-    then
-      rm -f "$dsttmp"
-    else
-      # Rename the file to the real destination.
-      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
-      # The rename failed, perhaps because mv can't rename something else
-      # to itself, or perhaps because mv is so ancient that it does not
-      # support -f.
-      {
-	# Now remove or move aside any old file at destination location.
-	# We try this two ways since rm can't unlink itself on some
-	# systems and the destination file might be busy for other
-	# reasons.  In this case, the final cleanup might fail but the new
-	# file should still install successfully.
-	{
-	  test ! -f "$dst" ||
-	  $doit $rmcmd -f "$dst" 2>/dev/null ||
-	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-	  } ||
-	  { echo "$0: cannot unlink or rename $dst" >&2
-	    (exit 1); exit 1
-	  }
-	} &&
-
-	# Now rename the file to the real destination.
-	$doit $mvcmd "$dsttmp" "$dst"
-      }
-    fi || exit 1
-
-    trap '' 0
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/components/external/SQLite-3.8.1/autoconf/ltmain.sh b/components/external/SQLite-3.8.1/autoconf/ltmain.sh
deleted file mode 100644
index 6a2f1166a9..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/ltmain.sh
+++ /dev/null
@@ -1,9655 +0,0 @@
-
-# libtool (GNU libtool) 2.4.2
-# Written by Gordon Matzigkeit <[email protected]>, 1996
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
-# This is free software; see the source for copying conditions.  There is NO
-# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-# GNU Libtool is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-# Usage: $progname [OPTION]... [MODE-ARG]...
-#
-# Provide generalized library-building support services.
-#
-#       --config             show all configuration variables
-#       --debug              enable verbose shell tracing
-#   -n, --dry-run            display commands without modifying any files
-#       --features           display basic configuration information and exit
-#       --mode=MODE          use operation mode MODE
-#       --preserve-dup-deps  don't remove duplicate dependency libraries
-#       --quiet, --silent    don't print informational messages
-#       --no-quiet, --no-silent
-#                            print informational messages (default)
-#       --no-warn            don't display warning messages
-#       --tag=TAG            use configuration variables from tag TAG
-#   -v, --verbose            print more informational messages than default
-#       --no-verbose         don't print the extra informational messages
-#       --version            print version information
-#   -h, --help, --help-all   print short, long, or detailed help message
-#
-# MODE must be one of the following:
-#
-#         clean              remove files from the build directory
-#         compile            compile a source file into a libtool object
-#         execute            automatically set library path, then run a program
-#         finish             complete the installation of libtool libraries
-#         install            install libraries or executables
-#         link               create a library or an executable
-#         uninstall          remove libraries from an installed directory
-#
-# MODE-ARGS vary depending on the MODE.  When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
-# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-#
-# When reporting a bug, please describe a test case to reproduce it and
-# include the following information:
-#
-#         host-triplet:	$host
-#         shell:		$SHELL
-#         compiler:		$LTCC
-#         compiler flags:		$LTCFLAGS
-#         linker:		$LD (gnu? $with_gnu_ld)
-#         $progname:	(GNU libtool) 2.4.2
-#         automake:	$automake_version
-#         autoconf:	$autoconf_version
-#
-# Report bugs to <[email protected]>.
-# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-# General help using GNU software: <http://www.gnu.org/gethelp/>.
-
-PROGRAM=libtool
-PACKAGE=libtool
-VERSION=2.4.2
-TIMESTAMP=""
-package_revision=1.3337
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-
-# NLS nuisances: We save the old values to restore during execute mode.
-lt_user_locale=
-lt_safe_locale=
-for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-do
-  eval "if test \"\${$lt_var+set}\" = set; then
-          save_$lt_var=\$$lt_var
-          $lt_var=C
-	  export $lt_var
-	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
-	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
-	fi"
-done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
-
-$lt_unset CDPATH
-
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-
-
-: ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
-: ${MAKE="make"}
-: ${MKDIR="mkdir"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-: ${Xsed="$SED -e 1s/^X//"}
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
-
-exit_status=$EXIT_SUCCESS
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" 	$lt_nl"
-
-dirname="s,/[^/]*$,,"
-basename="s,^.*/,,"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
-    if test "X$func_dirname_result" = "X${1}"; then
-      func_dirname_result="${3}"
-    else
-      func_dirname_result="$func_dirname_result${2}"
-    fi
-} # func_dirname may be replaced by extended shell implementation
-
-
-# func_basename file
-func_basename ()
-{
-    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-} # func_basename may be replaced by extended shell implementation
-
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-    # Extract subdirectory from the argument.
-    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
-    if test "X$func_dirname_result" = "X${1}"; then
-      func_dirname_result="${3}"
-    else
-      func_dirname_result="$func_dirname_result${2}"
-    fi
-    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
-} # func_dirname_and_basename may be replaced by extended shell implementation
-
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-    case ${2} in
-      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-    esac
-} # func_stripname may be replaced by extended shell implementation
-
-
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
-		s@/\./@/@g
-		t dotsl
-		s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
-
-# func_normal_abspath PATH
-# Remove doubled-up and trailing slashes, "." path components,
-# and cancel out any ".." path components in PATH after making
-# it an absolute path.
-#             value returned in "$func_normal_abspath_result"
-func_normal_abspath ()
-{
-  # Start from root dir and reassemble the path.
-  func_normal_abspath_result=
-  func_normal_abspath_tpath=$1
-  func_normal_abspath_altnamespace=
-  case $func_normal_abspath_tpath in
-    "")
-      # Empty path, that just means $cwd.
-      func_stripname '' '/' "`pwd`"
-      func_normal_abspath_result=$func_stripname_result
-      return
-    ;;
-    # The next three entries are used to spot a run of precisely
-    # two leading slashes without using negated character classes;
-    # we take advantage of case's first-match behaviour.
-    ///*)
-      # Unusual form of absolute path, do nothing.
-    ;;
-    //*)
-      # Not necessarily an ordinary path; POSIX reserves leading '//'
-      # and for example Cygwin uses it to access remote file shares
-      # over CIFS/SMB, so we conserve a leading double slash if found.
-      func_normal_abspath_altnamespace=/
-    ;;
-    /*)
-      # Absolute path, do nothing.
-    ;;
-    *)
-      # Relative path, prepend $cwd.
-      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
-    ;;
-  esac
-  # Cancel out all the simple stuff to save iterations.  We also want
-  # the path to end with a slash for ease of parsing, so make sure
-  # there is one (and only one) here.
-  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
-  while :; do
-    # Processed it all yet?
-    if test "$func_normal_abspath_tpath" = / ; then
-      # If we ascended to the root using ".." the result may be empty now.
-      if test -z "$func_normal_abspath_result" ; then
-        func_normal_abspath_result=/
-      fi
-      break
-    fi
-    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcar"`
-    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcdr"`
-    # Figure out what to do with it
-    case $func_normal_abspath_tcomponent in
-      "")
-        # Trailing empty path component, ignore it.
-      ;;
-      ..)
-        # Parent dir; strip last assembled component from result.
-        func_dirname "$func_normal_abspath_result"
-        func_normal_abspath_result=$func_dirname_result
-      ;;
-      *)
-        # Actual path component, append it.
-        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
-      ;;
-    esac
-  done
-  # Restore leading double-slash if one was found on entry.
-  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
-}
-
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-#             value returned in "$func_relative_path_result"
-func_relative_path ()
-{
-  func_relative_path_result=
-  func_normal_abspath "$1"
-  func_relative_path_tlibdir=$func_normal_abspath_result
-  func_normal_abspath "$2"
-  func_relative_path_tbindir=$func_normal_abspath_result
-
-  # Ascend the tree starting from libdir
-  while :; do
-    # check if we have found a prefix of bindir
-    case $func_relative_path_tbindir in
-      $func_relative_path_tlibdir)
-        # found an exact match
-        func_relative_path_tcancelled=
-        break
-        ;;
-      $func_relative_path_tlibdir*)
-        # found a matching prefix
-        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
-        func_relative_path_tcancelled=$func_stripname_result
-        if test -z "$func_relative_path_result"; then
-          func_relative_path_result=.
-        fi
-        break
-        ;;
-      *)
-        func_dirname $func_relative_path_tlibdir
-        func_relative_path_tlibdir=${func_dirname_result}
-        if test "x$func_relative_path_tlibdir" = x ; then
-          # Have to descend all the way to the root!
-          func_relative_path_result=../$func_relative_path_result
-          func_relative_path_tcancelled=$func_relative_path_tbindir
-          break
-        fi
-        func_relative_path_result=../$func_relative_path_result
-        ;;
-    esac
-  done
-
-  # Now calculate path; take care to avoid doubling-up slashes.
-  func_stripname '' '/' "$func_relative_path_result"
-  func_relative_path_result=$func_stripname_result
-  func_stripname '/' '/' "$func_relative_path_tcancelled"
-  if test "x$func_stripname_result" != x ; then
-    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
-  fi
-
-  # Normalisation. If bindir is libdir, return empty string,
-  # else relative path ending with a slash; either way, target
-  # file name can be directly appended.
-  if test ! -z "$func_relative_path_result"; then
-    func_stripname './' '' "$func_relative_path_result/"
-    func_relative_path_result=$func_stripname_result
-  fi
-}
-
-# The name of this program:
-func_dirname_and_basename "$progpath"
-progname=$func_basename_result
-
-# Make sure we have an absolute path for reexecution:
-case $progpath in
-  [\\/]*|[A-Za-z]:\\*) ;;
-  *[\\/]*)
-     progdir=$func_dirname_result
-     progdir=`cd "$progdir" && pwd`
-     progpath="$progdir/$progname"
-     ;;
-  *)
-     save_IFS="$IFS"
-     IFS=${PATH_SEPARATOR-:}
-     for progdir in $PATH; do
-       IFS="$save_IFS"
-       test -x "$progdir/$progname" && break
-     done
-     IFS="$save_IFS"
-     test -n "$progdir" || progdir=`pwd`
-     progpath="$progdir/$progname"
-     ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
-
-# Sed substitution that converts a w32 file name or path
-# which contains forward slashes, into one that contains
-# (escaped) backslashes.  A very naive implementation.
-lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-
-# Re-`\' parameter expansions in output of double_quote_subst that were
-# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
-# in input to double_quote_subst, that '$' was protected from expansion.
-# Since each input `\' is now two `\'s, look for any number of runs of
-# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
-bs='\\'
-bs2='\\\\'
-bs4='\\\\\\\\'
-dollar='\$'
-sed_double_backslash="\
-  s/$bs4/&\\
-/g
-  s/^$bs2$dollar/$bs&/
-  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
-  s/\n//g"
-
-# Standard options:
-opt_dry_run=false
-opt_help=false
-opt_quiet=false
-opt_verbose=false
-opt_warning=:
-
-# func_echo arg...
-# Echo program name prefixed message, along with the current mode
-# name if it has been set yet.
-func_echo ()
-{
-    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
-}
-
-# func_verbose arg...
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
-{
-    $opt_verbose && func_echo ${1+"$@"}
-
-    # A bug in bash halts the script if the last line of a function
-    # fails when set -e is in force, so we need another command to
-    # work around that:
-    :
-}
-
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
-    $ECHO "$*"
-}
-
-# func_error arg...
-# Echo program name prefixed message to standard error.
-func_error ()
-{
-    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
-}
-
-# func_warning arg...
-# Echo program name prefixed warning message to standard error.
-func_warning ()
-{
-    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
-
-    # bash bug again:
-    :
-}
-
-# func_fatal_error arg...
-# Echo program name prefixed message to standard error, and exit.
-func_fatal_error ()
-{
-    func_error ${1+"$@"}
-    exit $EXIT_FAILURE
-}
-
-# func_fatal_help arg...
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
-{
-    func_error ${1+"$@"}
-    func_fatal_error "$help"
-}
-help="Try \`$progname --help' for more information."  ## default
-
-
-# func_grep expression filename
-# Check whether EXPRESSION matches any line of FILENAME, without output.
-func_grep ()
-{
-    $GREP "$1" "$2" >/dev/null 2>&1
-}
-
-
-# func_mkdir_p directory-path
-# Make sure the entire path to DIRECTORY-PATH is available.
-func_mkdir_p ()
-{
-    my_directory_path="$1"
-    my_dir_list=
-
-    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
-
-      # Protect directory names starting with `-'
-      case $my_directory_path in
-        -*) my_directory_path="./$my_directory_path" ;;
-      esac
-
-      # While some portion of DIR does not yet exist...
-      while test ! -d "$my_directory_path"; do
-        # ...make a list in topmost first order.  Use a colon delimited
-	# list incase some portion of path contains whitespace.
-        my_dir_list="$my_directory_path:$my_dir_list"
-
-        # If the last portion added has no slash in it, the list is done
-        case $my_directory_path in */*) ;; *) break ;; esac
-
-        # ...otherwise throw away the child directory and loop
-        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
-      done
-      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
-
-      save_mkdir_p_IFS="$IFS"; IFS=':'
-      for my_dir in $my_dir_list; do
-	IFS="$save_mkdir_p_IFS"
-        # mkdir can fail with a `File exist' error if two processes
-        # try to create one of the directories concurrently.  Don't
-        # stop in that case!
-        $MKDIR "$my_dir" 2>/dev/null || :
-      done
-      IFS="$save_mkdir_p_IFS"
-
-      # Bail out if we (or some other process) failed to create a directory.
-      test -d "$my_directory_path" || \
-        func_fatal_error "Failed to create \`$1'"
-    fi
-}
-
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible.  If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
-    my_template="${TMPDIR-/tmp}/${1-$progname}"
-
-    if test "$opt_dry_run" = ":"; then
-      # Return a directory name, but don't create it in dry-run mode
-      my_tmpdir="${my_template}-$$"
-    else
-
-      # If mktemp works, use that first and foremost
-      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
-      if test ! -d "$my_tmpdir"; then
-        # Failing that, at least try and use $RANDOM to avoid a race
-        my_tmpdir="${my_template}-${RANDOM-0}$$"
-
-        save_mktempdir_umask=`umask`
-        umask 0077
-        $MKDIR "$my_tmpdir"
-        umask $save_mktempdir_umask
-      fi
-
-      # If we're not in dry-run mode, bomb out on failure
-      test -d "$my_tmpdir" || \
-        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
-    fi
-
-    $ECHO "$my_tmpdir"
-}
-
-
-# func_quote_for_eval arg
-# Aesthetically quote ARG to be evaled later.
-# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# is double-quoted, suitable for a subsequent eval, whereas
-# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# which are still active within double quotes backslashified.
-func_quote_for_eval ()
-{
-    case $1 in
-      *[\\\`\"\$]*)
-	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
-      *)
-        func_quote_for_eval_unquoted_result="$1" ;;
-    esac
-
-    case $func_quote_for_eval_unquoted_result in
-      # Double-quote args containing shell metacharacters to delay
-      # word splitting, command substitution and and variable
-      # expansion for a subsequent eval.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
-        ;;
-      *)
-        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
-    esac
-}
-
-
-# func_quote_for_expand arg
-# Aesthetically quote ARG to be evaled later; same as above,
-# but do not quote variable references.
-func_quote_for_expand ()
-{
-    case $1 in
-      *[\\\`\"]*)
-	my_arg=`$ECHO "$1" | $SED \
-	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
-      *)
-        my_arg="$1" ;;
-    esac
-
-    case $my_arg in
-      # Double-quote args containing shell metacharacters to delay
-      # word splitting and command substitution for a subsequent eval.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-        my_arg="\"$my_arg\""
-        ;;
-    esac
-
-    func_quote_for_expand_result="$my_arg"
-}
-
-
-# func_show_eval cmd [fail_exp]
-# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
-# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it.
-func_show_eval ()
-{
-    my_cmd="$1"
-    my_fail_exp="${2-:}"
-
-    ${opt_silent-false} || {
-      func_quote_for_expand "$my_cmd"
-      eval "func_echo $func_quote_for_expand_result"
-    }
-
-    if ${opt_dry_run-false}; then :; else
-      eval "$my_cmd"
-      my_status=$?
-      if test "$my_status" -eq 0; then :; else
-	eval "(exit $my_status); $my_fail_exp"
-      fi
-    fi
-}
-
-
-# func_show_eval_locale cmd [fail_exp]
-# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
-# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it.  Use the saved locale for evaluation.
-func_show_eval_locale ()
-{
-    my_cmd="$1"
-    my_fail_exp="${2-:}"
-
-    ${opt_silent-false} || {
-      func_quote_for_expand "$my_cmd"
-      eval "func_echo $func_quote_for_expand_result"
-    }
-
-    if ${opt_dry_run-false}; then :; else
-      eval "$lt_user_locale
-	    $my_cmd"
-      my_status=$?
-      eval "$lt_safe_locale"
-      if test "$my_status" -eq 0; then :; else
-	eval "(exit $my_status); $my_fail_exp"
-      fi
-    fi
-}
-
-# func_tr_sh
-# Turn $1 into a string suitable for a shell variable name.
-# Result is stored in $func_tr_sh_result.  All characters
-# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
-# if $1 begins with a digit, a '_' is prepended as well.
-func_tr_sh ()
-{
-  case $1 in
-  [0-9]* | *[!a-zA-Z0-9_]*)
-    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
-    ;;
-  * )
-    func_tr_sh_result=$1
-    ;;
-  esac
-}
-
-
-# func_version
-# Echo version message to standard output and exit.
-func_version ()
-{
-    $opt_debug
-
-    $SED -n '/(C)/!b go
-	:more
-	/\./!{
-	  N
-	  s/\n# / /
-	  b more
-	}
-	:go
-	/^# '$PROGRAM' (GNU /,/# warranty; / {
-        s/^# //
-	s/^# *$//
-        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
-        p
-     }' < "$progpath"
-     exit $?
-}
-
-# func_usage
-# Echo short help message to standard output and exit.
-func_usage ()
-{
-    $opt_debug
-
-    $SED -n '/^# Usage:/,/^#  *.*--help/ {
-        s/^# //
-	s/^# *$//
-	s/\$progname/'$progname'/
-	p
-    }' < "$progpath"
-    echo
-    $ECHO "run \`$progname --help | more' for full usage"
-    exit $?
-}
-
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
-func_help ()
-{
-    $opt_debug
-
-    $SED -n '/^# Usage:/,/# Report bugs to/ {
-	:print
-        s/^# //
-	s/^# *$//
-	s*\$progname*'$progname'*
-	s*\$host*'"$host"'*
-	s*\$SHELL*'"$SHELL"'*
-	s*\$LTCC*'"$LTCC"'*
-	s*\$LTCFLAGS*'"$LTCFLAGS"'*
-	s*\$LD*'"$LD"'*
-	s/\$with_gnu_ld/'"$with_gnu_ld"'/
-	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
-	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
-	p
-	d
-     }
-     /^# .* home page:/b print
-     /^# General help using/b print
-     ' < "$progpath"
-    ret=$?
-    if test -z "$1"; then
-      exit $ret
-    fi
-}
-
-# func_missing_arg argname
-# Echo program name prefixed message to standard error and set global
-# exit_cmd.
-func_missing_arg ()
-{
-    $opt_debug
-
-    func_error "missing argument for $1."
-    exit_cmd=exit
-}
-
-
-# func_split_short_opt shortopt
-# Set func_split_short_opt_name and func_split_short_opt_arg shell
-# variables after splitting SHORTOPT after the 2nd character.
-func_split_short_opt ()
-{
-    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
-    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
-
-    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
-    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
-} # func_split_short_opt may be replaced by extended shell implementation
-
-
-# func_split_long_opt longopt
-# Set func_split_long_opt_name and func_split_long_opt_arg shell
-# variables after splitting LONGOPT at the `=' sign.
-func_split_long_opt ()
-{
-    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
-    my_sed_long_arg='1s/^--[^=]*=//'
-
-    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
-    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
-} # func_split_long_opt may be replaced by extended shell implementation
-
-exit_cmd=:
-
-
-
-
-
-magic="%%%MAGIC variable%%%"
-magic_exe="%%%MAGIC EXE variable%%%"
-
-# Global variables.
-nonopt=
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-    eval "${1}=\$${1}\${2}"
-} # func_append may be replaced by extended shell implementation
-
-# func_append_quoted var value
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-func_append_quoted ()
-{
-    func_quote_for_eval "${2}"
-    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
-} # func_append_quoted may be replaced by extended shell implementation
-
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-    func_arith_result=`expr "${@}"`
-} # func_arith may be replaced by extended shell implementation
-
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
-} # func_len may be replaced by extended shell implementation
-
-
-# func_lo2o object
-func_lo2o ()
-{
-    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-} # func_lo2o may be replaced by extended shell implementation
-
-
-# func_xform libobj-or-source
-func_xform ()
-{
-    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-} # func_xform may be replaced by extended shell implementation
-
-
-# func_fatal_configuration arg...
-# Echo program name prefixed message to standard error, followed by
-# a configuration failure hint, and exit.
-func_fatal_configuration ()
-{
-    func_error ${1+"$@"}
-    func_error "See the $PACKAGE documentation for more information."
-    func_fatal_error "Fatal configuration error."
-}
-
-
-# func_config
-# Display the configuration for all the tags in this script.
-func_config ()
-{
-    re_begincf='^# ### BEGIN LIBTOOL'
-    re_endcf='^# ### END LIBTOOL'
-
-    # Default configuration.
-    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
-
-    # Now print the configurations for the tags.
-    for tagname in $taglist; do
-      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
-    done
-
-    exit $?
-}
-
-# func_features
-# Display the features supported by this script.
-func_features ()
-{
-    echo "host: $host"
-    if test "$build_libtool_libs" = yes; then
-      echo "enable shared libraries"
-    else
-      echo "disable shared libraries"
-    fi
-    if test "$build_old_libs" = yes; then
-      echo "enable static libraries"
-    else
-      echo "disable static libraries"
-    fi
-
-    exit $?
-}
-
-# func_enable_tag tagname
-# Verify that TAGNAME is valid, and either flag an error and exit, or
-# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
-# variable here.
-func_enable_tag ()
-{
-  # Global variable:
-  tagname="$1"
-
-  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
-  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
-  sed_extractcf="/$re_begincf/,/$re_endcf/p"
-
-  # Validate tagname.
-  case $tagname in
-    *[!-_A-Za-z0-9,/]*)
-      func_fatal_error "invalid tag name: $tagname"
-      ;;
-  esac
-
-  # Don't test for the "default" C tag, as we know it's
-  # there but not specially marked.
-  case $tagname in
-    CC) ;;
-    *)
-      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
-	taglist="$taglist $tagname"
-
-	# Evaluate the configuration.  Be careful to quote the path
-	# and the sed script, to avoid splitting on whitespace, but
-	# also don't use non-portable quotes within backquotes within
-	# quotes we have to do it in 2 steps:
-	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
-	eval "$extractedcf"
-      else
-	func_error "ignoring unknown tag $tagname"
-      fi
-      ;;
-  esac
-}
-
-# func_check_version_match
-# Ensure that we are using m4 macros, and libtool script from the same
-# release of libtool.
-func_check_version_match ()
-{
-  if test "$package_revision" != "$macro_revision"; then
-    if test "$VERSION" != "$macro_version"; then
-      if test -z "$macro_version"; then
-        cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from an older release.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
-      else
-        cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
-      fi
-    else
-      cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
-$progname: but the definition of this LT_INIT comes from revision $macro_revision.
-$progname: You should recreate aclocal.m4 with macros from revision $package_revision
-$progname: of $PACKAGE $VERSION and run autoconf again.
-_LT_EOF
-    fi
-
-    exit $EXIT_MISMATCH
-  fi
-}
-
-
-# Shorthand for --mode=foo, only valid as the first argument
-case $1 in
-clean|clea|cle|cl)
-  shift; set dummy --mode clean ${1+"$@"}; shift
-  ;;
-compile|compil|compi|comp|com|co|c)
-  shift; set dummy --mode compile ${1+"$@"}; shift
-  ;;
-execute|execut|execu|exec|exe|ex|e)
-  shift; set dummy --mode execute ${1+"$@"}; shift
-  ;;
-finish|finis|fini|fin|fi|f)
-  shift; set dummy --mode finish ${1+"$@"}; shift
-  ;;
-install|instal|insta|inst|ins|in|i)
-  shift; set dummy --mode install ${1+"$@"}; shift
-  ;;
-link|lin|li|l)
-  shift; set dummy --mode link ${1+"$@"}; shift
-  ;;
-uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
-  shift; set dummy --mode uninstall ${1+"$@"}; shift
-  ;;
-esac
-
-
-
-# Option defaults:
-opt_debug=:
-opt_dry_run=false
-opt_config=false
-opt_preserve_dup_deps=false
-opt_features=false
-opt_finish=false
-opt_help=false
-opt_help_all=false
-opt_silent=:
-opt_warning=:
-opt_verbose=:
-opt_silent=false
-opt_verbose=false
-
-
-# Parse options once, thoroughly.  This comes as soon as possible in the
-# script to make things like `--version' happen as quickly as we can.
-{
-  # this just eases exit handling
-  while test $# -gt 0; do
-    opt="$1"
-    shift
-    case $opt in
-      --debug|-x)	opt_debug='set -x'
-			func_echo "enabling shell trace mode"
-			$opt_debug
-			;;
-      --dry-run|--dryrun|-n)
-			opt_dry_run=:
-			;;
-      --config)
-			opt_config=:
-func_config
-			;;
-      --dlopen|-dlopen)
-			optarg="$1"
-			opt_dlopen="${opt_dlopen+$opt_dlopen
-}$optarg"
-			shift
-			;;
-      --preserve-dup-deps)
-			opt_preserve_dup_deps=:
-			;;
-      --features)
-			opt_features=:
-func_features
-			;;
-      --finish)
-			opt_finish=:
-set dummy --mode finish ${1+"$@"}; shift
-			;;
-      --help)
-			opt_help=:
-			;;
-      --help-all)
-			opt_help_all=:
-opt_help=': help-all'
-			;;
-      --mode)
-			test $# = 0 && func_missing_arg $opt && break
-			optarg="$1"
-			opt_mode="$optarg"
-case $optarg in
-  # Valid mode arguments:
-  clean|compile|execute|finish|install|link|relink|uninstall) ;;
-
-  # Catch anything else as an error
-  *) func_error "invalid argument for $opt"
-     exit_cmd=exit
-     break
-     ;;
-esac
-			shift
-			;;
-      --no-silent|--no-quiet)
-			opt_silent=false
-func_append preserve_args " $opt"
-			;;
-      --no-warning|--no-warn)
-			opt_warning=false
-func_append preserve_args " $opt"
-			;;
-      --no-verbose)
-			opt_verbose=false
-func_append preserve_args " $opt"
-			;;
-      --silent|--quiet)
-			opt_silent=:
-func_append preserve_args " $opt"
-        opt_verbose=false
-			;;
-      --verbose|-v)
-			opt_verbose=:
-func_append preserve_args " $opt"
-opt_silent=false
-			;;
-      --tag)
-			test $# = 0 && func_missing_arg $opt && break
-			optarg="$1"
-			opt_tag="$optarg"
-func_append preserve_args " $opt $optarg"
-func_enable_tag "$optarg"
-			shift
-			;;
-
-      -\?|-h)		func_usage				;;
-      --help)		func_help				;;
-      --version)	func_version				;;
-
-      # Separate optargs to long options:
-      --*=*)
-			func_split_long_opt "$opt"
-			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
-			shift
-			;;
-
-      # Separate non-argument short options:
-      -\?*|-h*|-n*|-v*)
-			func_split_short_opt "$opt"
-			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
-			shift
-			;;
-
-      --)		break					;;
-      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
-      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
-    esac
-  done
-
-  # Validate options:
-
-  # save first non-option argument
-  if test "$#" -gt 0; then
-    nonopt="$opt"
-    shift
-  fi
-
-  # preserve --debug
-  test "$opt_debug" = : || func_append preserve_args " --debug"
-
-  case $host in
-    *cygwin* | *mingw* | *pw32* | *cegcc*)
-      # don't eliminate duplications in $postdeps and $predeps
-      opt_duplicate_compiler_generated_deps=:
-      ;;
-    *)
-      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
-      ;;
-  esac
-
-  $opt_help || {
-    # Sanity checks first:
-    func_check_version_match
-
-    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-      func_fatal_configuration "not configured to build any kind of library"
-    fi
-
-    # Darwin sucks
-    eval std_shrext=\"$shrext_cmds\"
-
-    # Only execute mode is allowed to have -dlopen flags.
-    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
-      func_error "unrecognized option \`-dlopen'"
-      $ECHO "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    # Change the help message to a mode-specific one.
-    generic_help="$help"
-    help="Try \`$progname --help --mode=$opt_mode' for more information."
-  }
-
-
-  # Bail if the options were screwed
-  $exit_cmd $EXIT_FAILURE
-}
-
-
-
-
-## ----------- ##
-##    Main.    ##
-## ----------- ##
-
-# func_lalib_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_lalib_p ()
-{
-    test -f "$1" &&
-      $SED -e 4q "$1" 2>/dev/null \
-        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
-}
-
-# func_lalib_unsafe_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
-# This function implements the same check as func_lalib_p without
-# resorting to external programs.  To this end, it redirects stdin and
-# closes it afterwards, without saving the original file descriptor.
-# As a safety measure, use it only where a negative result would be
-# fatal anyway.  Works if `file' does not exist.
-func_lalib_unsafe_p ()
-{
-    lalib_p=no
-    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
-	for lalib_p_l in 1 2 3 4
-	do
-	    read lalib_p_line
-	    case "$lalib_p_line" in
-		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
-	    esac
-	done
-	exec 0<&5 5<&-
-    fi
-    test "$lalib_p" = yes
-}
-
-# func_ltwrapper_script_p file
-# True iff FILE is a libtool wrapper script
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_script_p ()
-{
-    func_lalib_p "$1"
-}
-
-# func_ltwrapper_executable_p file
-# True iff FILE is a libtool wrapper executable
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_executable_p ()
-{
-    func_ltwrapper_exec_suffix=
-    case $1 in
-    *.exe) ;;
-    *) func_ltwrapper_exec_suffix=.exe ;;
-    esac
-    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
-}
-
-# func_ltwrapper_scriptname file
-# Assumes file is an ltwrapper_executable
-# uses $file to determine the appropriate filename for a
-# temporary ltwrapper_script.
-func_ltwrapper_scriptname ()
-{
-    func_dirname_and_basename "$1" "" "."
-    func_stripname '' '.exe' "$func_basename_result"
-    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
-}
-
-# func_ltwrapper_p file
-# True iff FILE is a libtool wrapper script or wrapper executable
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_p ()
-{
-    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
-}
-
-
-# func_execute_cmds commands fail_cmd
-# Execute tilde-delimited COMMANDS.
-# If FAIL_CMD is given, eval that upon failure.
-# FAIL_CMD may read-access the current command in variable CMD!
-func_execute_cmds ()
-{
-    $opt_debug
-    save_ifs=$IFS; IFS='~'
-    for cmd in $1; do
-      IFS=$save_ifs
-      eval cmd=\"$cmd\"
-      func_show_eval "$cmd" "${2-:}"
-    done
-    IFS=$save_ifs
-}
-
-
-# func_source file
-# Source FILE, adding directory component if necessary.
-# Note that it is not necessary on cygwin/mingw to append a dot to
-# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
-# behavior happens only for exec(3), not for open(2)!  Also, sourcing
-# `FILE.' does not work on cygwin managed mounts.
-func_source ()
-{
-    $opt_debug
-    case $1 in
-    */* | *\\*)	. "$1" ;;
-    *)		. "./$1" ;;
-    esac
-}
-
-
-# func_resolve_sysroot PATH
-# Replace a leading = in PATH with a sysroot.  Store the result into
-# func_resolve_sysroot_result
-func_resolve_sysroot ()
-{
-  func_resolve_sysroot_result=$1
-  case $func_resolve_sysroot_result in
-  =*)
-    func_stripname '=' '' "$func_resolve_sysroot_result"
-    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
-    ;;
-  esac
-}
-
-# func_replace_sysroot PATH
-# If PATH begins with the sysroot, replace it with = and
-# store the result into func_replace_sysroot_result.
-func_replace_sysroot ()
-{
-  case "$lt_sysroot:$1" in
-  ?*:"$lt_sysroot"*)
-    func_stripname "$lt_sysroot" '' "$1"
-    func_replace_sysroot_result="=$func_stripname_result"
-    ;;
-  *)
-    # Including no sysroot.
-    func_replace_sysroot_result=$1
-    ;;
-  esac
-}
-
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
-{
-    $opt_debug
-    if test -n "$available_tags" && test -z "$tagname"; then
-      CC_quoted=
-      for arg in $CC; do
-	func_append_quoted CC_quoted "$arg"
-      done
-      CC_expanded=`func_echo_all $CC`
-      CC_quoted_expanded=`func_echo_all $CC_quoted`
-      case $@ in
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
-      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
-      # Blanks at the start of $base_compile will cause this to fail
-      # if we don't check for them as well.
-      *)
-	for z in $available_tags; do
-	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
-	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
-	    CC_quoted=
-	    for arg in $CC; do
-	      # Double-quote args containing other shell metacharacters.
-	      func_append_quoted CC_quoted "$arg"
-	    done
-	    CC_expanded=`func_echo_all $CC`
-	    CC_quoted_expanded=`func_echo_all $CC_quoted`
-	    case "$@ " in
-	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
-	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
-	      # The compiler in the base compile command matches
-	      # the one in the tagged configuration.
-	      # Assume this is the tagged configuration we want.
-	      tagname=$z
-	      break
-	      ;;
-	    esac
-	  fi
-	done
-	# If $tagname still isn't set, then no tagged configuration
-	# was found and let the user know that the "--tag" command
-	# line option must be used.
-	if test -z "$tagname"; then
-	  func_echo "unable to infer tagged configuration"
-	  func_fatal_error "specify a tag with \`--tag'"
-#	else
-#	  func_verbose "using $tagname tagged configuration"
-	fi
-	;;
-      esac
-    fi
-}
-
-
-
-# func_write_libtool_object output_name pic_name nonpic_name
-# Create a libtool object file (analogous to a ".la" file),
-# but don't create it if we're doing a dry run.
-func_write_libtool_object ()
-{
-    write_libobj=${1}
-    if test "$build_libtool_libs" = yes; then
-      write_lobj=\'${2}\'
-    else
-      write_lobj=none
-    fi
-
-    if test "$build_old_libs" = yes; then
-      write_oldobj=\'${3}\'
-    else
-      write_oldobj=none
-    fi
-
-    $opt_dry_run || {
-      cat >${write_libobj}T <<EOF
-# $write_libobj - a libtool object file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-pic_object=$write_lobj
-
-# Name of the non-PIC object
-non_pic_object=$write_oldobj
-
-EOF
-      $MV "${write_libobj}T" "${write_libobj}"
-    }
-}
-
-
-##################################################
-# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
-##################################################
-
-# func_convert_core_file_wine_to_w32 ARG
-# Helper function used by file name conversion functions when $build is *nix,
-# and $host is mingw, cygwin, or some other w32 environment. Relies on a
-# correctly configured wine environment available, with the winepath program
-# in $build's $PATH.
-#
-# ARG is the $build file name to be converted to w32 format.
-# Result is available in $func_convert_core_file_wine_to_w32_result, and will
-# be empty on error (or when ARG is empty)
-func_convert_core_file_wine_to_w32 ()
-{
-  $opt_debug
-  func_convert_core_file_wine_to_w32_result="$1"
-  if test -n "$1"; then
-    # Unfortunately, winepath does not exit with a non-zero error code, so we
-    # are forced to check the contents of stdout. On the other hand, if the
-    # command is not found, the shell will set an exit code of 127 and print
-    # *an error message* to stdout. So we must check for both error code of
-    # zero AND non-empty stdout, which explains the odd construction:
-    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
-    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
-      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
-        $SED -e "$lt_sed_naive_backslashify"`
-    else
-      func_convert_core_file_wine_to_w32_result=
-    fi
-  fi
-}
-# end: func_convert_core_file_wine_to_w32
-
-
-# func_convert_core_path_wine_to_w32 ARG
-# Helper function used by path conversion functions when $build is *nix, and
-# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
-# configured wine environment available, with the winepath program in $build's
-# $PATH. Assumes ARG has no leading or trailing path separator characters.
-#
-# ARG is path to be converted from $build format to win32.
-# Result is available in $func_convert_core_path_wine_to_w32_result.
-# Unconvertible file (directory) names in ARG are skipped; if no directory names
-# are convertible, then the result may be empty.
-func_convert_core_path_wine_to_w32 ()
-{
-  $opt_debug
-  # unfortunately, winepath doesn't convert paths, only file names
-  func_convert_core_path_wine_to_w32_result=""
-  if test -n "$1"; then
-    oldIFS=$IFS
-    IFS=:
-    for func_convert_core_path_wine_to_w32_f in $1; do
-      IFS=$oldIFS
-      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
-      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
-        if test -z "$func_convert_core_path_wine_to_w32_result"; then
-          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
-        else
-          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
-        fi
-      fi
-    done
-    IFS=$oldIFS
-  fi
-}
-# end: func_convert_core_path_wine_to_w32
-
-
-# func_cygpath ARGS...
-# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
-# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
-# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
-# (2), returns the Cygwin file name or path in func_cygpath_result (input
-# file name or path is assumed to be in w32 format, as previously converted
-# from $build's *nix or MSYS format). In case (3), returns the w32 file name
-# or path in func_cygpath_result (input file name or path is assumed to be in
-# Cygwin format). Returns an empty string on error.
-#
-# ARGS are passed to cygpath, with the last one being the file name or path to
-# be converted.
-#
-# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
-# environment variable; do not put it in $PATH.
-func_cygpath ()
-{
-  $opt_debug
-  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
-    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
-    if test "$?" -ne 0; then
-      # on failure, ensure result is empty
-      func_cygpath_result=
-    fi
-  else
-    func_cygpath_result=
-    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
-  fi
-}
-#end: func_cygpath
-
-
-# func_convert_core_msys_to_w32 ARG
-# Convert file name or path ARG from MSYS format to w32 format.  Return
-# result in func_convert_core_msys_to_w32_result.
-func_convert_core_msys_to_w32 ()
-{
-  $opt_debug
-  # awkward: cmd appends spaces to result
-  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
-    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
-}
-#end: func_convert_core_msys_to_w32
-
-
-# func_convert_file_check ARG1 ARG2
-# Verify that ARG1 (a file name in $build format) was converted to $host
-# format in ARG2. Otherwise, emit an error message, but continue (resetting
-# func_to_host_file_result to ARG1).
-func_convert_file_check ()
-{
-  $opt_debug
-  if test -z "$2" && test -n "$1" ; then
-    func_error "Could not determine host file name corresponding to"
-    func_error "  \`$1'"
-    func_error "Continuing, but uninstalled executables may not work."
-    # Fallback:
-    func_to_host_file_result="$1"
-  fi
-}
-# end func_convert_file_check
-
-
-# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
-# Verify that FROM_PATH (a path in $build format) was converted to $host
-# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
-# func_to_host_file_result to a simplistic fallback value (see below).
-func_convert_path_check ()
-{
-  $opt_debug
-  if test -z "$4" && test -n "$3"; then
-    func_error "Could not determine the host path corresponding to"
-    func_error "  \`$3'"
-    func_error "Continuing, but uninstalled executables may not work."
-    # Fallback.  This is a deliberately simplistic "conversion" and
-    # should not be "improved".  See libtool.info.
-    if test "x$1" != "x$2"; then
-      lt_replace_pathsep_chars="s|$1|$2|g"
-      func_to_host_path_result=`echo "$3" |
-        $SED -e "$lt_replace_pathsep_chars"`
-    else
-      func_to_host_path_result="$3"
-    fi
-  fi
-}
-# end func_convert_path_check
-
-
-# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
-# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
-# and appending REPL if ORIG matches BACKPAT.
-func_convert_path_front_back_pathsep ()
-{
-  $opt_debug
-  case $4 in
-  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
-    ;;
-  esac
-  case $4 in
-  $2 ) func_append func_to_host_path_result "$3"
-    ;;
-  esac
-}
-# end func_convert_path_front_back_pathsep
-
-
-##################################################
-# $build to $host FILE NAME CONVERSION FUNCTIONS #
-##################################################
-# invoked via `$to_host_file_cmd ARG'
-#
-# In each case, ARG is the path to be converted from $build to $host format.
-# Result will be available in $func_to_host_file_result.
-
-
-# func_to_host_file ARG
-# Converts the file name ARG from $build format to $host format. Return result
-# in func_to_host_file_result.
-func_to_host_file ()
-{
-  $opt_debug
-  $to_host_file_cmd "$1"
-}
-# end func_to_host_file
-
-
-# func_to_tool_file ARG LAZY
-# converts the file name ARG from $build format to toolchain format. Return
-# result in func_to_tool_file_result.  If the conversion in use is listed
-# in (the comma separated) LAZY, no conversion takes place.
-func_to_tool_file ()
-{
-  $opt_debug
-  case ,$2, in
-    *,"$to_tool_file_cmd",*)
-      func_to_tool_file_result=$1
-      ;;
-    *)
-      $to_tool_file_cmd "$1"
-      func_to_tool_file_result=$func_to_host_file_result
-      ;;
-  esac
-}
-# end func_to_tool_file
-
-
-# func_convert_file_noop ARG
-# Copy ARG to func_to_host_file_result.
-func_convert_file_noop ()
-{
-  func_to_host_file_result="$1"
-}
-# end func_convert_file_noop
-
-
-# func_convert_file_msys_to_w32 ARG
-# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
-# conversion to w32 is not available inside the cwrapper.  Returns result in
-# func_to_host_file_result.
-func_convert_file_msys_to_w32 ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    func_convert_core_msys_to_w32 "$1"
-    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_msys_to_w32
-
-
-# func_convert_file_cygwin_to_w32 ARG
-# Convert file name ARG from Cygwin to w32 format.  Returns result in
-# func_to_host_file_result.
-func_convert_file_cygwin_to_w32 ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
-    # LT_CYGPATH in this case.
-    func_to_host_file_result=`cygpath -m "$1"`
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_cygwin_to_w32
-
-
-# func_convert_file_nix_to_w32 ARG
-# Convert file name ARG from *nix to w32 format.  Requires a wine environment
-# and a working winepath. Returns result in func_to_host_file_result.
-func_convert_file_nix_to_w32 ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    func_convert_core_file_wine_to_w32 "$1"
-    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_nix_to_w32
-
-
-# func_convert_file_msys_to_cygwin ARG
-# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
-# Returns result in func_to_host_file_result.
-func_convert_file_msys_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    func_convert_core_msys_to_w32 "$1"
-    func_cygpath -u "$func_convert_core_msys_to_w32_result"
-    func_to_host_file_result="$func_cygpath_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_msys_to_cygwin
-
-
-# func_convert_file_nix_to_cygwin ARG
-# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
-# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
-# in func_to_host_file_result.
-func_convert_file_nix_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_file_result="$1"
-  if test -n "$1"; then
-    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
-    func_convert_core_file_wine_to_w32 "$1"
-    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
-    func_to_host_file_result="$func_cygpath_result"
-  fi
-  func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_nix_to_cygwin
-
-
-#############################################
-# $build to $host PATH CONVERSION FUNCTIONS #
-#############################################
-# invoked via `$to_host_path_cmd ARG'
-#
-# In each case, ARG is the path to be converted from $build to $host format.
-# The result will be available in $func_to_host_path_result.
-#
-# Path separators are also converted from $build format to $host format.  If
-# ARG begins or ends with a path separator character, it is preserved (but
-# converted to $host format) on output.
-#
-# All path conversion functions are named using the following convention:
-#   file name conversion function    : func_convert_file_X_to_Y ()
-#   path conversion function         : func_convert_path_X_to_Y ()
-# where, for any given $build/$host combination the 'X_to_Y' value is the
-# same.  If conversion functions are added for new $build/$host combinations,
-# the two new functions must follow this pattern, or func_init_to_host_path_cmd
-# will break.
-
-
-# func_init_to_host_path_cmd
-# Ensures that function "pointer" variable $to_host_path_cmd is set to the
-# appropriate value, based on the value of $to_host_file_cmd.
-to_host_path_cmd=
-func_init_to_host_path_cmd ()
-{
-  $opt_debug
-  if test -z "$to_host_path_cmd"; then
-    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
-    to_host_path_cmd="func_convert_path_${func_stripname_result}"
-  fi
-}
-
-
-# func_to_host_path ARG
-# Converts the path ARG from $build format to $host format. Return result
-# in func_to_host_path_result.
-func_to_host_path ()
-{
-  $opt_debug
-  func_init_to_host_path_cmd
-  $to_host_path_cmd "$1"
-}
-# end func_to_host_path
-
-
-# func_convert_path_noop ARG
-# Copy ARG to func_to_host_path_result.
-func_convert_path_noop ()
-{
-  func_to_host_path_result="$1"
-}
-# end func_convert_path_noop
-
-
-# func_convert_path_msys_to_w32 ARG
-# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
-# conversion to w32 is not available inside the cwrapper.  Returns result in
-# func_to_host_path_result.
-func_convert_path_msys_to_w32 ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # Remove leading and trailing path separator characters from ARG.  MSYS
-    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
-    # and winepath ignores them completely.
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
-    func_convert_path_check : ";" \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-  fi
-}
-# end func_convert_path_msys_to_w32
-
-
-# func_convert_path_cygwin_to_w32 ARG
-# Convert path ARG from Cygwin to w32 format.  Returns result in
-# func_to_host_file_result.
-func_convert_path_cygwin_to_w32 ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # See func_convert_path_msys_to_w32:
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
-    func_convert_path_check : ";" \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-  fi
-}
-# end func_convert_path_cygwin_to_w32
-
-
-# func_convert_path_nix_to_w32 ARG
-# Convert path ARG from *nix to w32 format.  Requires a wine environment and
-# a working winepath.  Returns result in func_to_host_file_result.
-func_convert_path_nix_to_w32 ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # See func_convert_path_msys_to_w32:
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
-    func_convert_path_check : ";" \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
-  fi
-}
-# end func_convert_path_nix_to_w32
-
-
-# func_convert_path_msys_to_cygwin ARG
-# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
-# Returns result in func_to_host_file_result.
-func_convert_path_msys_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # See func_convert_path_msys_to_w32:
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
-    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
-    func_to_host_path_result="$func_cygpath_result"
-    func_convert_path_check : : \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
-  fi
-}
-# end func_convert_path_msys_to_cygwin
-
-
-# func_convert_path_nix_to_cygwin ARG
-# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
-# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
-# func_to_host_file_result.
-func_convert_path_nix_to_cygwin ()
-{
-  $opt_debug
-  func_to_host_path_result="$1"
-  if test -n "$1"; then
-    # Remove leading and trailing path separator characters from
-    # ARG. msys behavior is inconsistent here, cygpath turns them
-    # into '.;' and ';.', and winepath ignores them completely.
-    func_stripname : : "$1"
-    func_to_host_path_tmp1=$func_stripname_result
-    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
-    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
-    func_to_host_path_result="$func_cygpath_result"
-    func_convert_path_check : : \
-      "$func_to_host_path_tmp1" "$func_to_host_path_result"
-    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
-  fi
-}
-# end func_convert_path_nix_to_cygwin
-
-
-# func_mode_compile arg...
-func_mode_compile ()
-{
-    $opt_debug
-    # Get the compilation command and the source file.
-    base_compile=
-    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
-    suppress_opt=yes
-    suppress_output=
-    arg_mode=normal
-    libobj=
-    later=
-    pie_flag=
-
-    for arg
-    do
-      case $arg_mode in
-      arg  )
-	# do not "continue".  Instead, add this to base_compile
-	lastarg="$arg"
-	arg_mode=normal
-	;;
-
-      target )
-	libobj="$arg"
-	arg_mode=normal
-	continue
-	;;
-
-      normal )
-	# Accept any command-line options.
-	case $arg in
-	-o)
-	  test -n "$libobj" && \
-	    func_fatal_error "you cannot specify \`-o' more than once"
-	  arg_mode=target
-	  continue
-	  ;;
-
-	-pie | -fpie | -fPIE)
-          func_append pie_flag " $arg"
-	  continue
-	  ;;
-
-	-shared | -static | -prefer-pic | -prefer-non-pic)
-	  func_append later " $arg"
-	  continue
-	  ;;
-
-	-no-suppress)
-	  suppress_opt=no
-	  continue
-	  ;;
-
-	-Xcompiler)
-	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
-	  continue      #  The current "srcfile" will either be retained or
-	  ;;            #  replaced later.  I would guess that would be a bug.
-
-	-Wc,*)
-	  func_stripname '-Wc,' '' "$arg"
-	  args=$func_stripname_result
-	  lastarg=
-	  save_ifs="$IFS"; IFS=','
-	  for arg in $args; do
-	    IFS="$save_ifs"
-	    func_append_quoted lastarg "$arg"
-	  done
-	  IFS="$save_ifs"
-	  func_stripname ' ' '' "$lastarg"
-	  lastarg=$func_stripname_result
-
-	  # Add the arguments to base_compile.
-	  func_append base_compile " $lastarg"
-	  continue
-	  ;;
-
-	*)
-	  # Accept the current argument as the source file.
-	  # The previous "srcfile" becomes the current argument.
-	  #
-	  lastarg="$srcfile"
-	  srcfile="$arg"
-	  ;;
-	esac  #  case $arg
-	;;
-      esac    #  case $arg_mode
-
-      # Aesthetically quote the previous argument.
-      func_append_quoted base_compile "$lastarg"
-    done # for arg
-
-    case $arg_mode in
-    arg)
-      func_fatal_error "you must specify an argument for -Xcompile"
-      ;;
-    target)
-      func_fatal_error "you must specify a target with \`-o'"
-      ;;
-    *)
-      # Get the name of the library object.
-      test -z "$libobj" && {
-	func_basename "$srcfile"
-	libobj="$func_basename_result"
-      }
-      ;;
-    esac
-
-    # Recognize several different file suffixes.
-    # If the user specifies -o file.o, it is replaced with file.lo
-    case $libobj in
-    *.[cCFSifmso] | \
-    *.ada | *.adb | *.ads | *.asm | \
-    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
-    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
-      func_xform "$libobj"
-      libobj=$func_xform_result
-      ;;
-    esac
-
-    case $libobj in
-    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
-    *)
-      func_fatal_error "cannot determine name of library object from \`$libobj'"
-      ;;
-    esac
-
-    func_infer_tag $base_compile
-
-    for arg in $later; do
-      case $arg in
-      -shared)
-	test "$build_libtool_libs" != yes && \
-	  func_fatal_configuration "can not build a shared library"
-	build_old_libs=no
-	continue
-	;;
-
-      -static)
-	build_libtool_libs=no
-	build_old_libs=yes
-	continue
-	;;
-
-      -prefer-pic)
-	pic_mode=yes
-	continue
-	;;
-
-      -prefer-non-pic)
-	pic_mode=no
-	continue
-	;;
-      esac
-    done
-
-    func_quote_for_eval "$libobj"
-    test "X$libobj" != "X$func_quote_for_eval_result" \
-      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
-      && func_warning "libobj name \`$libobj' may not contain shell special characters."
-    func_dirname_and_basename "$obj" "/" ""
-    objname="$func_basename_result"
-    xdir="$func_dirname_result"
-    lobj=${xdir}$objdir/$objname
-
-    test -z "$base_compile" && \
-      func_fatal_help "you must specify a compilation command"
-
-    # Delete any leftover library objects.
-    if test "$build_old_libs" = yes; then
-      removelist="$obj $lobj $libobj ${libobj}T"
-    else
-      removelist="$lobj $libobj ${libobj}T"
-    fi
-
-    # On Cygwin there's no "real" PIC flag so we must build both object types
-    case $host_os in
-    cygwin* | mingw* | pw32* | os2* | cegcc*)
-      pic_mode=default
-      ;;
-    esac
-    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
-      # non-PIC code in shared libraries is not supported
-      pic_mode=default
-    fi
-
-    # Calculate the filename of the output object if compiler does
-    # not support -o with -c
-    if test "$compiler_c_o" = no; then
-      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
-      lockfile="$output_obj.lock"
-    else
-      output_obj=
-      need_locks=no
-      lockfile=
-    fi
-
-    # Lock this critical section if it is needed
-    # We use this script file to make the link, it avoids creating a new file
-    if test "$need_locks" = yes; then
-      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
-	func_echo "Waiting for $lockfile to be removed"
-	sleep 2
-      done
-    elif test "$need_locks" = warn; then
-      if test -f "$lockfile"; then
-	$ECHO "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$opt_dry_run || $RM $removelist
-	exit $EXIT_FAILURE
-      fi
-      func_append removelist " $output_obj"
-      $ECHO "$srcfile" > "$lockfile"
-    fi
-
-    $opt_dry_run || $RM $removelist
-    func_append removelist " $lockfile"
-    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
-
-    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
-    srcfile=$func_to_tool_file_result
-    func_quote_for_eval "$srcfile"
-    qsrcfile=$func_quote_for_eval_result
-
-    # Only build a PIC object if we are building libtool libraries.
-    if test "$build_libtool_libs" = yes; then
-      # Without this assignment, base_compile gets emptied.
-      fbsd_hideous_sh_bug=$base_compile
-
-      if test "$pic_mode" != no; then
-	command="$base_compile $qsrcfile $pic_flag"
-      else
-	# Don't build PIC code
-	command="$base_compile $qsrcfile"
-      fi
-
-      func_mkdir_p "$xdir$objdir"
-
-      if test -z "$output_obj"; then
-	# Place PIC objects in $objdir
-	func_append command " -o $lobj"
-      fi
-
-      func_show_eval_locale "$command"	\
-          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$ECHO "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$opt_dry_run || $RM $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      # Just move the object if needed, then go on to compile the next one
-      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
-	func_show_eval '$MV "$output_obj" "$lobj"' \
-	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
-      fi
-
-      # Allow error messages only from the first compilation.
-      if test "$suppress_opt" = yes; then
-	suppress_output=' >/dev/null 2>&1'
-      fi
-    fi
-
-    # Only build a position-dependent object if we build old libraries.
-    if test "$build_old_libs" = yes; then
-      if test "$pic_mode" != yes; then
-	# Don't build PIC code
-	command="$base_compile $qsrcfile$pie_flag"
-      else
-	command="$base_compile $qsrcfile $pic_flag"
-      fi
-      if test "$compiler_c_o" = yes; then
-	func_append command " -o $obj"
-      fi
-
-      # Suppress compiler output if we already did a PIC compilation.
-      func_append command "$suppress_output"
-      func_show_eval_locale "$command" \
-        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$ECHO "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$opt_dry_run || $RM $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      # Just move the object if needed
-      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
-	func_show_eval '$MV "$output_obj" "$obj"' \
-	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
-      fi
-    fi
-
-    $opt_dry_run || {
-      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
-
-      # Unlock the critical section if it was locked
-      if test "$need_locks" != no; then
-	removelist=$lockfile
-        $RM "$lockfile"
-      fi
-    }
-
-    exit $EXIT_SUCCESS
-}
-
-$opt_help || {
-  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
-}
-
-func_mode_help ()
-{
-    # We need to display help for each of the modes.
-    case $opt_mode in
-      "")
-        # Generic help is extracted from the usage comments
-        # at the start of this file.
-        func_help
-        ;;
-
-      clean)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
-        ;;
-
-      compile)
-      $ECHO \
-"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-  -no-suppress      do not suppress compiler output for multiple passes
-  -prefer-pic       try to build PIC objects only
-  -prefer-non-pic   try to build non-PIC objects only
-  -shared           do not build a \`.o' file suitable for static linking
-  -static           only build a \`.o' file suitable for static linking
-  -Wc,FLAG          pass FLAG directly to the compiler
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-        ;;
-
-      execute)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-        ;;
-
-      finish)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-        ;;
-
-      install)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The following components of INSTALL-COMMAND are treated specially:
-
-  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-        ;;
-
-      link)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -avoid-version    do not add a version suffix if possible
-  -bindir BINDIR    specify path to binaries directory (for systems where
-                    libraries must be found in the PATH setting at runtime)
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -export-symbols SYMFILE
-                    try to export only the symbols listed in SYMFILE
-  -export-symbols-regex REGEX
-                    try to export only the symbols matching REGEX
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -module           build a library that can dlopened
-  -no-fast-install  disable the fast-install mode
-  -no-install       link a not-installable executable
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
-  -precious-files-regex REGEX
-                    don't remove output files matching REGEX
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -shared           only do dynamic linking of libtool libraries
-  -shrext SUFFIX    override the standard shared library file extension
-  -static           do not do any dynamic linking of uninstalled libtool libraries
-  -static-libtool-libs
-                    do not do any dynamic linking of libtool libraries
-  -version-info CURRENT[:REVISION[:AGE]]
-                    specify library version info [each variable defaults to 0]
-  -weak LIBNAME     declare that the target provides the LIBNAME interface
-  -Wc,FLAG
-  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
-  -Wl,FLAG
-  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
-  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
-        ;;
-
-      uninstall)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-        ;;
-
-      *)
-        func_fatal_help "invalid operation mode \`$opt_mode'"
-        ;;
-    esac
-
-    echo
-    $ECHO "Try \`$progname --help' for more information about other modes."
-}
-
-# Now that we've collected a possible --mode arg, show help if necessary
-if $opt_help; then
-  if test "$opt_help" = :; then
-    func_mode_help
-  else
-    {
-      func_help noexit
-      for opt_mode in compile link execute install finish uninstall clean; do
-	func_mode_help
-      done
-    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
-    {
-      func_help noexit
-      for opt_mode in compile link execute install finish uninstall clean; do
-	echo
-	func_mode_help
-      done
-    } |
-    sed '1d
-      /^When reporting/,/^Report/{
-	H
-	d
-      }
-      $x
-      /information about other modes/d
-      /more detailed .*MODE/d
-      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
-  fi
-  exit $?
-fi
-
-
-# func_mode_execute arg...
-func_mode_execute ()
-{
-    $opt_debug
-    # The first argument is the command name.
-    cmd="$nonopt"
-    test -z "$cmd" && \
-      func_fatal_help "you must specify a COMMAND"
-
-    # Handle -dlopen flags immediately.
-    for file in $opt_dlopen; do
-      test -f "$file" \
-	|| func_fatal_help "\`$file' is not a file"
-
-      dir=
-      case $file in
-      *.la)
-	func_resolve_sysroot "$file"
-	file=$func_resolve_sysroot_result
-
-	# Check to see that this really is a libtool archive.
-	func_lalib_unsafe_p "$file" \
-	  || func_fatal_help "\`$lib' is not a valid libtool archive"
-
-	# Read the libtool library.
-	dlname=
-	library_names=
-	func_source "$file"
-
-	# Skip this library if it cannot be dlopened.
-	if test -z "$dlname"; then
-	  # Warn if it was a shared library.
-	  test -n "$library_names" && \
-	    func_warning "\`$file' was not linked with \`-export-dynamic'"
-	  continue
-	fi
-
-	func_dirname "$file" "" "."
-	dir="$func_dirname_result"
-
-	if test -f "$dir/$objdir/$dlname"; then
-	  func_append dir "/$objdir"
-	else
-	  if test ! -f "$dir/$dlname"; then
-	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
-	  fi
-	fi
-	;;
-
-      *.lo)
-	# Just add the directory containing the .lo file.
-	func_dirname "$file" "" "."
-	dir="$func_dirname_result"
-	;;
-
-      *)
-	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
-	continue
-	;;
-      esac
-
-      # Get the absolute pathname.
-      absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
-
-      # Now add the directory to shlibpath_var.
-      if eval "test -z \"\$$shlibpath_var\""; then
-	eval "$shlibpath_var=\"\$dir\""
-      else
-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-      fi
-    done
-
-    # This variable tells wrapper scripts just to set shlibpath_var
-    # rather than running their programs.
-    libtool_execute_magic="$magic"
-
-    # Check if any of the arguments is a wrapper script.
-    args=
-    for file
-    do
-      case $file in
-      -* | *.la | *.lo ) ;;
-      *)
-	# Do a test to see if this is really a libtool program.
-	if func_ltwrapper_script_p "$file"; then
-	  func_source "$file"
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	elif func_ltwrapper_executable_p "$file"; then
-	  func_ltwrapper_scriptname "$file"
-	  func_source "$func_ltwrapper_scriptname_result"
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	fi
-	;;
-      esac
-      # Quote arguments (to preserve shell metacharacters).
-      func_append_quoted args "$file"
-    done
-
-    if test "X$opt_dry_run" = Xfalse; then
-      if test -n "$shlibpath_var"; then
-	# Export the shlibpath_var.
-	eval "export $shlibpath_var"
-      fi
-
-      # Restore saved environment variables
-      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-      do
-	eval "if test \"\${save_$lt_var+set}\" = set; then
-                $lt_var=\$save_$lt_var; export $lt_var
-	      else
-		$lt_unset $lt_var
-	      fi"
-      done
-
-      # Now prepare to actually exec the command.
-      exec_cmd="\$cmd$args"
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
-	echo "export $shlibpath_var"
-      fi
-      $ECHO "$cmd$args"
-      exit $EXIT_SUCCESS
-    fi
-}
-
-test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
-
-
-# func_mode_finish arg...
-func_mode_finish ()
-{
-    $opt_debug
-    libs=
-    libdirs=
-    admincmds=
-
-    for opt in "$nonopt" ${1+"$@"}
-    do
-      if test -d "$opt"; then
-	func_append libdirs " $opt"
-
-      elif test -f "$opt"; then
-	if func_lalib_unsafe_p "$opt"; then
-	  func_append libs " $opt"
-	else
-	  func_warning "\`$opt' is not a valid libtool archive"
-	fi
-
-      else
-	func_fatal_error "invalid argument \`$opt'"
-      fi
-    done
-
-    if test -n "$libs"; then
-      if test -n "$lt_sysroot"; then
-        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
-        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
-      else
-        sysroot_cmd=
-      fi
-
-      # Remove sysroot references
-      if $opt_dry_run; then
-        for lib in $libs; do
-          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
-        done
-      else
-        tmpdir=`func_mktempdir`
-        for lib in $libs; do
-	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
-	    > $tmpdir/tmp-la
-	  mv -f $tmpdir/tmp-la $lib
-	done
-        ${RM}r "$tmpdir"
-      fi
-    fi
-
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for libdir in $libdirs; do
-	if test -n "$finish_cmds"; then
-	  # Do each command in the finish commands.
-	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
-'"$cmd"'"'
-	fi
-	if test -n "$finish_eval"; then
-	  # Do the single finish_eval.
-	  eval cmds=\"$finish_eval\"
-	  $opt_dry_run || eval "$cmds" || func_append admincmds "
-       $cmds"
-	fi
-      done
-    fi
-
-    # Exit here if they wanted silent mode.
-    $opt_silent && exit $EXIT_SUCCESS
-
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      echo "----------------------------------------------------------------------"
-      echo "Libraries have been installed in:"
-      for libdir in $libdirs; do
-	$ECHO "   $libdir"
-      done
-      echo
-      echo "If you ever happen to want to link against installed libraries"
-      echo "in a given directory, LIBDIR, you must either use libtool, and"
-      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-      echo "flag during linking and do at least one of the following:"
-      if test -n "$shlibpath_var"; then
-	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-	echo "     during execution"
-      fi
-      if test -n "$runpath_var"; then
-	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-	echo "     during linking"
-      fi
-      if test -n "$hardcode_libdir_flag_spec"; then
-	libdir=LIBDIR
-	eval flag=\"$hardcode_libdir_flag_spec\"
-
-	$ECHO "   - use the \`$flag' linker flag"
-      fi
-      if test -n "$admincmds"; then
-	$ECHO "   - have your system administrator run these commands:$admincmds"
-      fi
-      if test -f /etc/ld.so.conf; then
-	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-      fi
-      echo
-
-      echo "See any operating system documentation about shared libraries for"
-      case $host in
-	solaris2.[6789]|solaris2.1[0-9])
-	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
-	  echo "pages."
-	  ;;
-	*)
-	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
-	  ;;
-      esac
-      echo "----------------------------------------------------------------------"
-    fi
-    exit $EXIT_SUCCESS
-}
-
-test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
-
-
-# func_mode_install arg...
-func_mode_install ()
-{
-    $opt_debug
-    # There may be an optional sh(1) argument at the beginning of
-    # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-       # Allow the use of GNU shtool's install command.
-       case $nonopt in *shtool*) :;; *) false;; esac; then
-      # Aesthetically quote it.
-      func_quote_for_eval "$nonopt"
-      install_prog="$func_quote_for_eval_result "
-      arg=$1
-      shift
-    else
-      install_prog=
-      arg=$nonopt
-    fi
-
-    # The real first argument should be the name of the installation program.
-    # Aesthetically quote it.
-    func_quote_for_eval "$arg"
-    func_append install_prog "$func_quote_for_eval_result"
-    install_shared_prog=$install_prog
-    case " $install_prog " in
-      *[\\\ /]cp\ *) install_cp=: ;;
-      *) install_cp=false ;;
-    esac
-
-    # We need to accept at least all the BSD install flags.
-    dest=
-    files=
-    opts=
-    prev=
-    install_type=
-    isdir=no
-    stripme=
-    no_mode=:
-    for arg
-    do
-      arg2=
-      if test -n "$dest"; then
-	func_append files " $dest"
-	dest=$arg
-	continue
-      fi
-
-      case $arg in
-      -d) isdir=yes ;;
-      -f)
-	if $install_cp; then :; else
-	  prev=$arg
-	fi
-	;;
-      -g | -m | -o)
-	prev=$arg
-	;;
-      -s)
-	stripme=" -s"
-	continue
-	;;
-      -*)
-	;;
-      *)
-	# If the previous option needed an argument, then skip it.
-	if test -n "$prev"; then
-	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
-	    arg2=$install_override_mode
-	    no_mode=false
-	  fi
-	  prev=
-	else
-	  dest=$arg
-	  continue
-	fi
-	;;
-      esac
-
-      # Aesthetically quote the argument.
-      func_quote_for_eval "$arg"
-      func_append install_prog " $func_quote_for_eval_result"
-      if test -n "$arg2"; then
-	func_quote_for_eval "$arg2"
-      fi
-      func_append install_shared_prog " $func_quote_for_eval_result"
-    done
-
-    test -z "$install_prog" && \
-      func_fatal_help "you must specify an install program"
-
-    test -n "$prev" && \
-      func_fatal_help "the \`$prev' option requires an argument"
-
-    if test -n "$install_override_mode" && $no_mode; then
-      if $install_cp; then :; else
-	func_quote_for_eval "$install_override_mode"
-	func_append install_shared_prog " -m $func_quote_for_eval_result"
-      fi
-    fi
-
-    if test -z "$files"; then
-      if test -z "$dest"; then
-	func_fatal_help "no file or destination specified"
-      else
-	func_fatal_help "you must specify a destination"
-      fi
-    fi
-
-    # Strip any trailing slash from the destination.
-    func_stripname '' '/' "$dest"
-    dest=$func_stripname_result
-
-    # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
-      destname=
-    else
-      func_dirname_and_basename "$dest" "" "."
-      destdir="$func_dirname_result"
-      destname="$func_basename_result"
-
-      # Not a directory, so check to see that there is only one file specified.
-      set dummy $files; shift
-      test "$#" -gt 1 && \
-	func_fatal_help "\`$dest' is not a directory"
-    fi
-    case $destdir in
-    [\\/]* | [A-Za-z]:[\\/]*) ;;
-    *)
-      for file in $files; do
-	case $file in
-	*.lo) ;;
-	*)
-	  func_fatal_help "\`$destdir' must be an absolute directory name"
-	  ;;
-	esac
-      done
-      ;;
-    esac
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    staticlibs=
-    future_libdirs=
-    current_libdirs=
-    for file in $files; do
-
-      # Do each installation.
-      case $file in
-      *.$libext)
-	# Do the static libraries later.
-	func_append staticlibs " $file"
-	;;
-
-      *.la)
-	func_resolve_sysroot "$file"
-	file=$func_resolve_sysroot_result
-
-	# Check to see that this really is a libtool archive.
-	func_lalib_unsafe_p "$file" \
-	  || func_fatal_help "\`$file' is not a valid libtool archive"
-
-	library_names=
-	old_library=
-	relink_command=
-	func_source "$file"
-
-	# Add the libdir to current_libdirs if it is the destination.
-	if test "X$destdir" = "X$libdir"; then
-	  case "$current_libdirs " in
-	  *" $libdir "*) ;;
-	  *) func_append current_libdirs " $libdir" ;;
-	  esac
-	else
-	  # Note the libdir as a future libdir.
-	  case "$future_libdirs " in
-	  *" $libdir "*) ;;
-	  *) func_append future_libdirs " $libdir" ;;
-	  esac
-	fi
-
-	func_dirname "$file" "/" ""
-	dir="$func_dirname_result"
-	func_append dir "$objdir"
-
-	if test -n "$relink_command"; then
-	  # Determine the prefix the user has applied to our future dir.
-	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
-
-	  # Don't allow the user to place us outside of our expected
-	  # location b/c this prevents finding dependent libraries that
-	  # are installed to the same prefix.
-	  # At present, this check doesn't affect windows .dll's that
-	  # are installed into $libdir/../bin (currently, that works fine)
-	  # but it's something to keep an eye on.
-	  test "$inst_prefix_dir" = "$destdir" && \
-	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
-
-	  if test -n "$inst_prefix_dir"; then
-	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
-	  else
-	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
-	  fi
-
-	  func_warning "relinking \`$file'"
-	  func_show_eval "$relink_command" \
-	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
-	fi
-
-	# See the names of the shared library.
-	set dummy $library_names; shift
-	if test -n "$1"; then
-	  realname="$1"
-	  shift
-
-	  srcname="$realname"
-	  test -n "$relink_command" && srcname="$realname"T
-
-	  # Install the shared library and build the symlinks.
-	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
-	      'exit $?'
-	  tstripme="$stripme"
-	  case $host_os in
-	  cygwin* | mingw* | pw32* | cegcc*)
-	    case $realname in
-	    *.dll.a)
-	      tstripme=""
-	      ;;
-	    esac
-	    ;;
-	  esac
-	  if test -n "$tstripme" && test -n "$striplib"; then
-	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
-	  fi
-
-	  if test "$#" -gt 0; then
-	    # Delete the old symlinks, and create new ones.
-	    # Try `ln -sf' first, because the `ln' binary might depend on
-	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
-	    # so we also need to try rm && ln -s.
-	    for linkname
-	    do
-	      test "$linkname" != "$realname" \
-		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
-	    done
-	  fi
-
-	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
-	  func_execute_cmds "$postinstall_cmds" 'exit $?'
-	fi
-
-	# Install the pseudo-library for information purposes.
-	func_basename "$file"
-	name="$func_basename_result"
-	instname="$dir/$name"i
-	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
-
-	# Maybe install the static library, too.
-	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
-	;;
-
-      *.lo)
-	# Install (i.e. copy) a libtool object.
-
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  func_basename "$file"
-	  destfile="$func_basename_result"
-	  destfile="$destdir/$destfile"
-	fi
-
-	# Deduce the name of the destination old-style object file.
-	case $destfile in
-	*.lo)
-	  func_lo2o "$destfile"
-	  staticdest=$func_lo2o_result
-	  ;;
-	*.$objext)
-	  staticdest="$destfile"
-	  destfile=
-	  ;;
-	*)
-	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
-	  ;;
-	esac
-
-	# Install the libtool object if requested.
-	test -n "$destfile" && \
-	  func_show_eval "$install_prog $file $destfile" 'exit $?'
-
-	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
-	  # Deduce the name of the old-style object file.
-	  func_lo2o "$file"
-	  staticobj=$func_lo2o_result
-	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
-	fi
-	exit $EXIT_SUCCESS
-	;;
-
-      *)
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  func_basename "$file"
-	  destfile="$func_basename_result"
-	  destfile="$destdir/$destfile"
-	fi
-
-	# If the file is missing, and there is a .exe on the end, strip it
-	# because it is most likely a libtool script we actually want to
-	# install
-	stripped_ext=""
-	case $file in
-	  *.exe)
-	    if test ! -f "$file"; then
-	      func_stripname '' '.exe' "$file"
-	      file=$func_stripname_result
-	      stripped_ext=".exe"
-	    fi
-	    ;;
-	esac
-
-	# Do a test to see if this is really a libtool program.
-	case $host in
-	*cygwin* | *mingw*)
-	    if func_ltwrapper_executable_p "$file"; then
-	      func_ltwrapper_scriptname "$file"
-	      wrapper=$func_ltwrapper_scriptname_result
-	    else
-	      func_stripname '' '.exe' "$file"
-	      wrapper=$func_stripname_result
-	    fi
-	    ;;
-	*)
-	    wrapper=$file
-	    ;;
-	esac
-	if func_ltwrapper_script_p "$wrapper"; then
-	  notinst_deplibs=
-	  relink_command=
-
-	  func_source "$wrapper"
-
-	  # Check the variables that should have been set.
-	  test -z "$generated_by_libtool_version" && \
-	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
-
-	  finalize=yes
-	  for lib in $notinst_deplibs; do
-	    # Check to see that each library is installed.
-	    libdir=
-	    if test -f "$lib"; then
-	      func_source "$lib"
-	    fi
-	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
-	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      func_warning "\`$lib' has not been installed in \`$libdir'"
-	      finalize=no
-	    fi
-	  done
-
-	  relink_command=
-	  func_source "$wrapper"
-
-	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
-	    $opt_dry_run || {
-	      if test "$finalize" = yes; then
-	        tmpdir=`func_mktempdir`
-		func_basename "$file$stripped_ext"
-		file="$func_basename_result"
-	        outputname="$tmpdir/$file"
-	        # Replace the output file specification.
-	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
-
-	        $opt_silent || {
-	          func_quote_for_expand "$relink_command"
-		  eval "func_echo $func_quote_for_expand_result"
-	        }
-	        if eval "$relink_command"; then :
-	          else
-		  func_error "error: relink \`$file' with the above command before installing it"
-		  $opt_dry_run || ${RM}r "$tmpdir"
-		  continue
-	        fi
-	        file="$outputname"
-	      else
-	        func_warning "cannot relink \`$file'"
-	      fi
-	    }
-	  else
-	    # Install the binary that we compiled earlier.
-	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
-	  fi
-	fi
-
-	# remove .exe since cygwin /usr/bin/install will append another
-	# one anyway
-	case $install_prog,$host in
-	*/usr/bin/install*,*cygwin*)
-	  case $file:$destfile in
-	  *.exe:*.exe)
-	    # this is ok
-	    ;;
-	  *.exe:*)
-	    destfile=$destfile.exe
-	    ;;
-	  *:*.exe)
-	    func_stripname '' '.exe' "$destfile"
-	    destfile=$func_stripname_result
-	    ;;
-	  esac
-	  ;;
-	esac
-	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
-	$opt_dry_run || if test -n "$outputname"; then
-	  ${RM}r "$tmpdir"
-	fi
-	;;
-      esac
-    done
-
-    for file in $staticlibs; do
-      func_basename "$file"
-      name="$func_basename_result"
-
-      # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
-      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
-      tool_oldlib=$func_to_tool_file_result
-
-      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
-
-      if test -n "$stripme" && test -n "$old_striplib"; then
-	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
-      fi
-
-      # Do each command in the postinstall commands.
-      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
-    done
-
-    test -n "$future_libdirs" && \
-      func_warning "remember to run \`$progname --finish$future_libdirs'"
-
-    if test -n "$current_libdirs"; then
-      # Maybe just do a dry run.
-      $opt_dry_run && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
-    else
-      exit $EXIT_SUCCESS
-    fi
-}
-
-test "$opt_mode" = install && func_mode_install ${1+"$@"}
-
-
-# func_generate_dlsyms outputname originator pic_p
-# Extract symbols from dlprefiles and create ${outputname}S.o with
-# a dlpreopen symbol table.
-func_generate_dlsyms ()
-{
-    $opt_debug
-    my_outputname="$1"
-    my_originator="$2"
-    my_pic_p="${3-no}"
-    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
-    my_dlsyms=
-
-    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-      if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	my_dlsyms="${my_outputname}S.c"
-      else
-	func_error "not configured to extract global symbols from dlpreopened files"
-      fi
-    fi
-
-    if test -n "$my_dlsyms"; then
-      case $my_dlsyms in
-      "") ;;
-      *.c)
-	# Discover the nlist of each of the dlfiles.
-	nlist="$output_objdir/${my_outputname}.nm"
-
-	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
-
-	# Parse the name list into a source file.
-	func_verbose "creating $output_objdir/$my_dlsyms"
-
-	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
-#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
-#endif
-
-/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
-   relocations are performed -- see ld's documentation on pseudo-relocs.  */
-# define LT_DLSYM_CONST
-#elif defined(__osf__)
-/* This system does not cope well with relocations in const data.  */
-# define LT_DLSYM_CONST
-#else
-# define LT_DLSYM_CONST const
-#endif
-
-/* External symbol declarations for the compiler. */\
-"
-
-	if test "$dlself" = yes; then
-	  func_verbose "generating symbol list for \`$output'"
-
-	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
-
-	  # Add our own program objects to the symbol list.
-	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
-	  for progfile in $progfiles; do
-	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
-	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
-	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
-	  done
-
-	  if test -n "$exclude_expsyms"; then
-	    $opt_dry_run || {
-	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-	      eval '$MV "$nlist"T "$nlist"'
-	    }
-	  fi
-
-	  if test -n "$export_symbols_regex"; then
-	    $opt_dry_run || {
-	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-	      eval '$MV "$nlist"T "$nlist"'
-	    }
-	  fi
-
-	  # Prepare the list of exported symbols
-	  if test -z "$export_symbols"; then
-	    export_symbols="$output_objdir/$outputname.exp"
-	    $opt_dry_run || {
-	      $RM $export_symbols
-	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-	      case $host in
-	      *cygwin* | *mingw* | *cegcc* )
-                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
-	        ;;
-	      esac
-	    }
-	  else
-	    $opt_dry_run || {
-	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
-	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
-	      eval '$MV "$nlist"T "$nlist"'
-	      case $host in
-	        *cygwin* | *mingw* | *cegcc* )
-	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
-	          ;;
-	      esac
-	    }
-	  fi
-	fi
-
-	for dlprefile in $dlprefiles; do
-	  func_verbose "extracting global C symbols from \`$dlprefile'"
-	  func_basename "$dlprefile"
-	  name="$func_basename_result"
-          case $host in
-	    *cygwin* | *mingw* | *cegcc* )
-	      # if an import library, we need to obtain dlname
-	      if func_win32_import_lib_p "$dlprefile"; then
-	        func_tr_sh "$dlprefile"
-	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
-	        dlprefile_dlbasename=""
-	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
-	          # Use subshell, to avoid clobbering current variable values
-	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
-	          if test -n "$dlprefile_dlname" ; then
-	            func_basename "$dlprefile_dlname"
-	            dlprefile_dlbasename="$func_basename_result"
-	          else
-	            # no lafile. user explicitly requested -dlpreopen <import library>.
-	            $sharedlib_from_linklib_cmd "$dlprefile"
-	            dlprefile_dlbasename=$sharedlib_from_linklib_result
-	          fi
-	        fi
-	        $opt_dry_run || {
-	          if test -n "$dlprefile_dlbasename" ; then
-	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
-	          else
-	            func_warning "Could not compute DLL name from $name"
-	            eval '$ECHO ": $name " >> "$nlist"'
-	          fi
-	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
-	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
-	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
-	        }
-	      else # not an import lib
-	        $opt_dry_run || {
-	          eval '$ECHO ": $name " >> "$nlist"'
-	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
-	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
-	        }
-	      fi
-	    ;;
-	    *)
-	      $opt_dry_run || {
-	        eval '$ECHO ": $name " >> "$nlist"'
-	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
-	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
-	      }
-	    ;;
-          esac
-	done
-
-	$opt_dry_run || {
-	  # Make sure we have at least an empty file.
-	  test -f "$nlist" || : > "$nlist"
-
-	  if test -n "$exclude_expsyms"; then
-	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-	    $MV "$nlist"T "$nlist"
-	  fi
-
-	  # Try sorting and uniquifying the output.
-	  if $GREP -v "^: " < "$nlist" |
-	      if sort -k 3 </dev/null >/dev/null 2>&1; then
-		sort -k 3
-	      else
-		sort +2
-	      fi |
-	      uniq > "$nlist"S; then
-	    :
-	  else
-	    $GREP -v "^: " < "$nlist" > "$nlist"S
-	  fi
-
-	  if test -f "$nlist"S; then
-	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
-	  else
-	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
-	  fi
-
-	  echo >> "$output_objdir/$my_dlsyms" "\
-
-/* The mapping between symbol names and symbols.  */
-typedef struct {
-  const char *name;
-  void *address;
-} lt_dlsymlist;
-extern LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[];
-LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[] =
-{\
-  { \"$my_originator\", (void *) 0 },"
-
-	  case $need_lib_prefix in
-	  no)
-	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
-	    ;;
-	  *)
-	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
-	    ;;
-	  esac
-	  echo >> "$output_objdir/$my_dlsyms" "\
-  {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt_${my_prefix}_LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
-	} # !$opt_dry_run
-
-	pic_flag_for_symtable=
-	case "$compile_command " in
-	*" -static "*) ;;
-	*)
-	  case $host in
-	  # compiling the symbol table file with pic_flag works around
-	  # a FreeBSD bug that causes programs to crash when -lm is
-	  # linked before any other PIC object.  But we must not use
-	  # pic_flag when linking with -static.  The problem exists in
-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
-	  *-*-hpux*)
-	    pic_flag_for_symtable=" $pic_flag"  ;;
-	  *)
-	    if test "X$my_pic_p" != Xno; then
-	      pic_flag_for_symtable=" $pic_flag"
-	    fi
-	    ;;
-	  esac
-	  ;;
-	esac
-	symtab_cflags=
-	for arg in $LTCFLAGS; do
-	  case $arg in
-	  -pie | -fpie | -fPIE) ;;
-	  *) func_append symtab_cflags " $arg" ;;
-	  esac
-	done
-
-	# Now compile the dynamic symbol file.
-	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
-
-	# Clean up the generated files.
-	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
-
-	# Transform the symbol file into the correct name.
-	symfileobj="$output_objdir/${my_outputname}S.$objext"
-	case $host in
-	*cygwin* | *mingw* | *cegcc* )
-	  if test -f "$output_objdir/$my_outputname.def"; then
-	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-	  else
-	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
-	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
-	  fi
-	  ;;
-	*)
-	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
-	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
-	  ;;
-	esac
-	;;
-      *)
-	func_fatal_error "unknown suffix for \`$my_dlsyms'"
-	;;
-      esac
-    else
-      # We keep going just in case the user didn't refer to
-      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-      # really was required.
-
-      # Nullify the symbol file.
-      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
-      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
-    fi
-}
-
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-# Despite the name, also deal with 64 bit binaries.
-func_win32_libid ()
-{
-  $opt_debug
-  win32_libid_type="unknown"
-  win32_fileres=`file -L $1 2>/dev/null`
-  case $win32_fileres in
-  *ar\ archive\ import\ library*) # definitely import
-    win32_libid_type="x86 archive import"
-    ;;
-  *ar\ archive*) # could be an import, or static
-    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
-    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
-       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
-      func_to_tool_file "$1" func_convert_file_msys_to_w32
-      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
-	$SED -n -e '
-	    1,100{
-		/ I /{
-		    s,.*,import,
-		    p
-		    q
-		}
-	    }'`
-      case $win32_nmres in
-      import*)  win32_libid_type="x86 archive import";;
-      *)        win32_libid_type="x86 archive static";;
-      esac
-    fi
-    ;;
-  *DLL*)
-    win32_libid_type="x86 DLL"
-    ;;
-  *executable*) # but shell scripts are "executable" too...
-    case $win32_fileres in
-    *MS\ Windows\ PE\ Intel*)
-      win32_libid_type="x86 DLL"
-      ;;
-    esac
-    ;;
-  esac
-  $ECHO "$win32_libid_type"
-}
-
-# func_cygming_dll_for_implib ARG
-#
-# Platform-specific function to extract the
-# name of the DLL associated with the specified
-# import library ARG.
-# Invoked by eval'ing the libtool variable
-#    $sharedlib_from_linklib_cmd
-# Result is available in the variable
-#    $sharedlib_from_linklib_result
-func_cygming_dll_for_implib ()
-{
-  $opt_debug
-  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
-}
-
-# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
-#
-# The is the core of a fallback implementation of a
-# platform-specific function to extract the name of the
-# DLL associated with the specified import library LIBNAME.
-#
-# SECTION_NAME is either .idata$6 or .idata$7, depending
-# on the platform and compiler that created the implib.
-#
-# Echos the name of the DLL associated with the
-# specified import library.
-func_cygming_dll_for_implib_fallback_core ()
-{
-  $opt_debug
-  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
-  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
-    $SED '/^Contents of section '"$match_literal"':/{
-      # Place marker at beginning of archive member dllname section
-      s/.*/====MARK====/
-      p
-      d
-    }
-    # These lines can sometimes be longer than 43 characters, but
-    # are always uninteresting
-    /:[	 ]*file format pe[i]\{,1\}-/d
-    /^In archive [^:]*:/d
-    # Ensure marker is printed
-    /^====MARK====/p
-    # Remove all lines with less than 43 characters
-    /^.\{43\}/!d
-    # From remaining lines, remove first 43 characters
-    s/^.\{43\}//' |
-    $SED -n '
-      # Join marker and all lines until next marker into a single line
-      /^====MARK====/ b para
-      H
-      $ b para
-      b
-      :para
-      x
-      s/\n//g
-      # Remove the marker
-      s/^====MARK====//
-      # Remove trailing dots and whitespace
-      s/[\. \t]*$//
-      # Print
-      /./p' |
-    # we now have a list, one entry per line, of the stringified
-    # contents of the appropriate section of all members of the
-    # archive which possess that section. Heuristic: eliminate
-    # all those which have a first or second character that is
-    # a '.' (that is, objdump's representation of an unprintable
-    # character.) This should work for all archives with less than
-    # 0x302f exports -- but will fail for DLLs whose name actually
-    # begins with a literal '.' or a single character followed by
-    # a '.'.
-    #
-    # Of those that remain, print the first one.
-    $SED -e '/^\./d;/^.\./d;q'
-}
-
-# func_cygming_gnu_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is a GNU/binutils-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_gnu_implib_p ()
-{
-  $opt_debug
-  func_to_tool_file "$1" func_convert_file_msys_to_w32
-  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
-  test -n "$func_cygming_gnu_implib_tmp"
-}
-
-# func_cygming_ms_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is an MS-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_ms_implib_p ()
-{
-  $opt_debug
-  func_to_tool_file "$1" func_convert_file_msys_to_w32
-  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
-  test -n "$func_cygming_ms_implib_tmp"
-}
-
-# func_cygming_dll_for_implib_fallback ARG
-# Platform-specific function to extract the
-# name of the DLL associated with the specified
-# import library ARG.
-#
-# This fallback implementation is for use when $DLLTOOL
-# does not support the --identify-strict option.
-# Invoked by eval'ing the libtool variable
-#    $sharedlib_from_linklib_cmd
-# Result is available in the variable
-#    $sharedlib_from_linklib_result
-func_cygming_dll_for_implib_fallback ()
-{
-  $opt_debug
-  if func_cygming_gnu_implib_p "$1" ; then
-    # binutils import library
-    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
-  elif func_cygming_ms_implib_p "$1" ; then
-    # ms-generated import library
-    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
-  else
-    # unknown
-    sharedlib_from_linklib_result=""
-  fi
-}
-
-
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
-    $opt_debug
-    f_ex_an_ar_dir="$1"; shift
-    f_ex_an_ar_oldlib="$1"
-    if test "$lock_old_archive_extraction" = yes; then
-      lockfile=$f_ex_an_ar_oldlib.lock
-      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
-	func_echo "Waiting for $lockfile to be removed"
-	sleep 2
-      done
-    fi
-    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
-		   'stat=$?; rm -f "$lockfile"; exit $stat'
-    if test "$lock_old_archive_extraction" = yes; then
-      $opt_dry_run || rm -f "$lockfile"
-    fi
-    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
-     :
-    else
-      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
-    fi
-}
-
-
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
-{
-    $opt_debug
-    my_gentop="$1"; shift
-    my_oldlibs=${1+"$@"}
-    my_oldobjs=""
-    my_xlib=""
-    my_xabs=""
-    my_xdir=""
-
-    for my_xlib in $my_oldlibs; do
-      # Extract the objects.
-      case $my_xlib in
-	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
-	*) my_xabs=`pwd`"/$my_xlib" ;;
-      esac
-      func_basename "$my_xlib"
-      my_xlib="$func_basename_result"
-      my_xlib_u=$my_xlib
-      while :; do
-        case " $extracted_archives " in
-	*" $my_xlib_u "*)
-	  func_arith $extracted_serial + 1
-	  extracted_serial=$func_arith_result
-	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
-	*) break ;;
-	esac
-      done
-      extracted_archives="$extracted_archives $my_xlib_u"
-      my_xdir="$my_gentop/$my_xlib_u"
-
-      func_mkdir_p "$my_xdir"
-
-      case $host in
-      *-darwin*)
-	func_verbose "Extracting $my_xabs"
-	# Do not bother doing anything if just a dry run
-	$opt_dry_run || {
-	  darwin_orig_dir=`pwd`
-	  cd $my_xdir || exit $?
-	  darwin_archive=$my_xabs
-	  darwin_curdir=`pwd`
-	  darwin_base_archive=`basename "$darwin_archive"`
-	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
-	  if test -n "$darwin_arches"; then
-	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
-	    darwin_arch=
-	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
-	    for darwin_arch in  $darwin_arches ; do
-	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
-	      cd "$darwin_curdir"
-	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
-	    done # $darwin_arches
-            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
-	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
-	    darwin_file=
-	    darwin_files=
-	    for darwin_file in $darwin_filelist; do
-	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
-	      $LIPO -create -output "$darwin_file" $darwin_files
-	    done # $darwin_filelist
-	    $RM -rf unfat-$$
-	    cd "$darwin_orig_dir"
-	  else
-	    cd $darwin_orig_dir
-	    func_extract_an_archive "$my_xdir" "$my_xabs"
-	  fi # $darwin_arches
-	} # !$opt_dry_run
-	;;
-      *)
-        func_extract_an_archive "$my_xdir" "$my_xabs"
-	;;
-      esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
-    done
-
-    func_extract_archives_result="$my_oldobjs"
-}
-
-
-# func_emit_wrapper [arg=no]
-#
-# Emit a libtool wrapper script on stdout.
-# Don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable.  Must ONLY be called from within
-# func_mode_link because it depends on a number of variables
-# set therein.
-#
-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take.  If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the $objdir directory.  This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
-{
-	func_emit_wrapper_arg1=${1-no}
-
-	$ECHO "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='$sed_quote_subst'
-
-# Be Bourne compatible
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-  # install mode needs the following variables:
-  generated_by_libtool_version='$macro_version'
-  notinst_deplibs='$notinst_deplibs'
-else
-  # When we are sourced in execute mode, \$file and \$ECHO are already set.
-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    file=\"\$0\""
-
-    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
-    $ECHO "\
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-\$1
-_LTECHO_EOF'
-}
-    ECHO=\"$qECHO\"
-  fi
-
-# Very basic option parsing. These options are (a) specific to
-# the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
-# windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
-# this pattern).
-#
-# There are only two supported options: --lt-debug and
-# --lt-dump-script. There is, deliberately, no --lt-help.
-#
-# The first argument to this parsing function should be the
-# script's $0 value, followed by "$@".
-lt_option_debug=
-func_parse_lt_options ()
-{
-  lt_script_arg0=\$0
-  shift
-  for lt_opt
-  do
-    case \"\$lt_opt\" in
-    --lt-debug) lt_option_debug=1 ;;
-    --lt-dump-script)
-        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
-        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
-        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
-        cat \"\$lt_dump_D/\$lt_dump_F\"
-        exit 0
-      ;;
-    --lt-*)
-        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
-        exit 1
-      ;;
-    esac
-  done
-
-  # Print the debug banner immediately:
-  if test -n \"\$lt_option_debug\"; then
-    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
-  fi
-}
-
-# Used when --lt-debug. Prints its arguments to stdout
-# (redirection is the responsibility of the caller)
-func_lt_dump_args ()
-{
-  lt_dump_args_N=1;
-  for lt_arg
-  do
-    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
-    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
-  done
-}
-
-# Core function for launching the target application
-func_exec_program_core ()
-{
-"
-  case $host in
-  # Backslashes separate directories on plain windows
-  *-*-mingw | *-*-os2* | *-cegcc*)
-    $ECHO "\
-      if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
-        func_lt_dump_args \${1+\"\$@\"} 1>&2
-      fi
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
-    ;;
-
-  *)
-    $ECHO "\
-      if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
-        func_lt_dump_args \${1+\"\$@\"} 1>&2
-      fi
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
-    ;;
-  esac
-  $ECHO "\
-      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
-      exit 1
-}
-
-# A function to encapsulate launching the target application
-# Strips options in the --lt-* namespace from \$@ and
-# launches target application with the remaining arguments.
-func_exec_program ()
-{
-  case \" \$* \" in
-  *\\ --lt-*)
-    for lt_wr_arg
-    do
-      case \$lt_wr_arg in
-      --lt-*) ;;
-      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
-      esac
-      shift
-    done ;;
-  esac
-  func_exec_program_core \${1+\"\$@\"}
-}
-
-  # Parse options
-  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
-
-  # Find the directory that this script lives in.
-  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
-  while test -n \"\$file\"; do
-    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
-
-    # If there was a directory component, then change thisdir.
-    if test \"x\$destdir\" != \"x\$file\"; then
-      case \"\$destdir\" in
-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-      *) thisdir=\"\$thisdir/\$destdir\" ;;
-      esac
-    fi
-
-    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
-  done
-
-  # Usually 'no', except on cygwin/mingw when embedded into
-  # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
-  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
-    # special case for '.'
-    if test \"\$thisdir\" = \".\"; then
-      thisdir=\`pwd\`
-    fi
-    # remove .libs from thisdir
-    case \"\$thisdir\" in
-    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
-    $objdir )   thisdir=. ;;
-    esac
-  fi
-
-  # Try to get the absolute directory name.
-  absdir=\`cd \"\$thisdir\" && pwd\`
-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
-	if test "$fast_install" = yes; then
-	  $ECHO "\
-  program=lt-'$outputname'$exeext
-  progdir=\"\$thisdir/$objdir\"
-
-  if test ! -f \"\$progdir/\$program\" ||
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
-    file=\"\$\$-\$program\"
-
-    if test ! -d \"\$progdir\"; then
-      $MKDIR \"\$progdir\"
-    else
-      $RM \"\$progdir/\$file\"
-    fi"
-
-	  $ECHO "\
-
-    # relink executable if necessary
-    if test -n \"\$relink_command\"; then
-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-      else
-	$ECHO \"\$relink_command_output\" >&2
-	$RM \"\$progdir/\$file\"
-	exit 1
-      fi
-    fi
-
-    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-    { $RM \"\$progdir/\$program\";
-      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-    $RM \"\$progdir/\$file\"
-  fi"
-	else
-	  $ECHO "\
-  program='$outputname'
-  progdir=\"\$thisdir/$objdir\"
-"
-	fi
-
-	$ECHO "\
-
-  if test -f \"\$progdir/\$program\"; then"
-
-	# fixup the dll searchpath if we need to.
-	#
-	# Fix the DLL searchpath if we need to.  Do this before prepending
-	# to shlibpath, because on Windows, both are PATH and uninstalled
-	# libraries must come first.
-	if test -n "$dllsearchpath"; then
-	  $ECHO "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-	fi
-
-	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-	  $ECHO "\
-    # Add our own library path to $shlibpath_var
-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
-    # Some systems cannot cope with colon-terminated $shlibpath_var
-    # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
-
-    export $shlibpath_var
-"
-	fi
-
-	$ECHO "\
-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-      # Run the actual program with our arguments.
-      func_exec_program \${1+\"\$@\"}
-    fi
-  else
-    # The program doesn't exist.
-    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
-    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
-    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit 1
-  fi
-fi\
-"
-}
-
-
-# func_emit_cwrapperexe_src
-# emit the source code for a wrapper executable on stdout
-# Must ONLY be called from within func_mode_link because
-# it depends on a number of variable set therein.
-func_emit_cwrapperexe_src ()
-{
-	cat <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-
-   The $output program cannot be directly executed until all the libtool
-   libraries that it depends on are installed.
-
-   This wrapper executable should never be moved out of the build directory.
-   If it is, it will not operate correctly.
-*/
-EOF
-	    cat <<"EOF"
-#ifdef _MSC_VER
-# define _CRT_SECURE_NO_DEPRECATE 1
-#endif
-#include <stdio.h>
-#include <stdlib.h>
-#ifdef _MSC_VER
-# include <direct.h>
-# include <process.h>
-# include <io.h>
-#else
-# include <unistd.h>
-# include <stdint.h>
-# ifdef __CYGWIN__
-#  include <io.h>
-# endif
-#endif
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <sys/stat.h>
-
-/* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
-# ifdef __STRICT_ANSI__
-int _putenv (const char *);
-# endif
-#elif defined(__CYGWIN__)
-# ifdef __STRICT_ANSI__
-char *realpath (const char *, char *);
-int putenv (char *);
-int setenv (const char *, const char *, int);
-# endif
-/* #elif defined (other platforms) ... */
-#endif
-
-/* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
-# define setmode _setmode
-# define stat    _stat
-# define chmod   _chmod
-# define getcwd  _getcwd
-# define putenv  _putenv
-# define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-#  define _INTPTR_T_DEFINED
-#  define intptr_t int
-# endif
-#elif defined(__MINGW32__)
-# define setmode _setmode
-# define stat    _stat
-# define chmod   _chmod
-# define getcwd  _getcwd
-# define putenv  _putenv
-#elif defined(__CYGWIN__)
-# define HAVE_SETENV
-# define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
-#endif
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef S_IXOTH
-# define S_IXOTH 0
-#endif
-#ifndef S_IXGRP
-# define S_IXGRP 0
-#endif
-
-/* path handling portability macros */
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-  defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# define FOPEN_WB "wb"
-# ifndef DIR_SEPARATOR_2
-#  define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-#  define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
-	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#ifndef FOPEN_WB
-# define FOPEN_WB "w"
-#endif
-#ifndef _O_BINARY
-# define _O_BINARY 0
-#endif
-
-#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
-  if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-#if defined(LT_DEBUGWRAPPER)
-static int lt_debug = 1;
-#else
-static int lt_debug = 0;
-#endif
-
-const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
-
-void *xmalloc (size_t num);
-char *xstrdup (const char *string);
-const char *base_name (const char *name);
-char *find_executable (const char *wrapper);
-char *chase_symlinks (const char *pathspec);
-int make_executable (const char *path);
-int check_executable (const char *path);
-char *strendzap (char *str, const char *pat);
-void lt_debugprintf (const char *file, int line, const char *fmt, ...);
-void lt_fatal (const char *file, int line, const char *message, ...);
-static const char *nonnull (const char *s);
-static const char *nonempty (const char *s);
-void lt_setenv (const char *name, const char *value);
-char *lt_extend_str (const char *orig_value, const char *add, int to_end);
-void lt_update_exe_path (const char *name, const char *value);
-void lt_update_lib_path (const char *name, const char *value);
-char **prepare_spawn (char **argv);
-void lt_dump_script (FILE *f);
-EOF
-
-	    cat <<EOF
-volatile const char * MAGIC_EXE = "$magic_exe";
-const char * LIB_PATH_VARNAME = "$shlibpath_var";
-EOF
-
-	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-              func_to_host_path "$temp_rpath"
-	      cat <<EOF
-const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
-EOF
-	    else
-	      cat <<"EOF"
-const char * LIB_PATH_VALUE   = "";
-EOF
-	    fi
-
-	    if test -n "$dllsearchpath"; then
-              func_to_host_path "$dllsearchpath:"
-	      cat <<EOF
-const char * EXE_PATH_VARNAME = "PATH";
-const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
-EOF
-	    else
-	      cat <<"EOF"
-const char * EXE_PATH_VARNAME = "";
-const char * EXE_PATH_VALUE   = "";
-EOF
-	    fi
-
-	    if test "$fast_install" = yes; then
-	      cat <<EOF
-const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
-EOF
-	    else
-	      cat <<EOF
-const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
-EOF
-	    fi
-
-
-	    cat <<"EOF"
-
-#define LTWRAPPER_OPTION_PREFIX         "--lt-"
-
-static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
-static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
-static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
-
-int
-main (int argc, char *argv[])
-{
-  char **newargz;
-  int  newargc;
-  char *tmp_pathspec;
-  char *actual_cwrapper_path;
-  char *actual_cwrapper_name;
-  char *target_name;
-  char *lt_argv_zero;
-  intptr_t rval = 127;
-
-  int i;
-
-  program_name = (char *) xstrdup (base_name (argv[0]));
-  newargz = XMALLOC (char *, argc + 1);
-
-  /* very simple arg parsing; don't want to rely on getopt
-   * also, copy all non cwrapper options to newargz, except
-   * argz[0], which is handled differently
-   */
-  newargc=0;
-  for (i = 1; i < argc; i++)
-    {
-      if (strcmp (argv[i], dumpscript_opt) == 0)
-	{
-EOF
-	    case "$host" in
-	      *mingw* | *cygwin* )
-		# make stdout use "unix" line endings
-		echo "          setmode(1,_O_BINARY);"
-		;;
-	      esac
-
-	    cat <<"EOF"
-	  lt_dump_script (stdout);
-	  return 0;
-	}
-      if (strcmp (argv[i], debug_opt) == 0)
-	{
-          lt_debug = 1;
-          continue;
-	}
-      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
-        {
-          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
-             namespace, but it is not one of the ones we know about and
-             have already dealt with, above (inluding dump-script), then
-             report an error. Otherwise, targets might begin to believe
-             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
-             namespace. The first time any user complains about this, we'll
-             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
-             or a configure.ac-settable value.
-           */
-          lt_fatal (__FILE__, __LINE__,
-		    "unrecognized %s option: '%s'",
-                    ltwrapper_option_prefix, argv[i]);
-        }
-      /* otherwise ... */
-      newargz[++newargc] = xstrdup (argv[i]);
-    }
-  newargz[++newargc] = NULL;
-
-EOF
-	    cat <<EOF
-  /* The GNU banner must be the first non-error debug message */
-  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
-EOF
-	    cat <<"EOF"
-  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
-  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
-
-  tmp_pathspec = find_executable (argv[0]);
-  if (tmp_pathspec == NULL)
-    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(main) found exe (before symlink chase) at: %s\n",
-		  tmp_pathspec);
-
-  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(main) found exe (after symlink chase) at: %s\n",
-		  actual_cwrapper_path);
-  XFREE (tmp_pathspec);
-
-  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
-  strendzap (actual_cwrapper_path, actual_cwrapper_name);
-
-  /* wrapper name transforms */
-  strendzap (actual_cwrapper_name, ".exe");
-  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
-  XFREE (actual_cwrapper_name);
-  actual_cwrapper_name = tmp_pathspec;
-  tmp_pathspec = 0;
-
-  /* target_name transforms -- use actual target program name; might have lt- prefix */
-  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
-  strendzap (target_name, ".exe");
-  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
-  XFREE (target_name);
-  target_name = tmp_pathspec;
-  tmp_pathspec = 0;
-
-  lt_debugprintf (__FILE__, __LINE__,
-		  "(main) libtool target name: %s\n",
-		  target_name);
-EOF
-
-	    cat <<EOF
-  newargz[0] =
-    XMALLOC (char, (strlen (actual_cwrapper_path) +
-		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
-  strcpy (newargz[0], actual_cwrapper_path);
-  strcat (newargz[0], "$objdir");
-  strcat (newargz[0], "/");
-EOF
-
-	    cat <<"EOF"
-  /* stop here, and copy so we don't have to do this twice */
-  tmp_pathspec = xstrdup (newargz[0]);
-
-  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
-  strcat (newargz[0], actual_cwrapper_name);
-
-  /* DO want the lt- prefix here if it exists, so use target_name */
-  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
-  XFREE (tmp_pathspec);
-  tmp_pathspec = NULL;
-EOF
-
-	    case $host_os in
-	      mingw*)
-	    cat <<"EOF"
-  {
-    char* p;
-    while ((p = strchr (newargz[0], '\\')) != NULL)
-      {
-	*p = '/';
-      }
-    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
-      {
-	*p = '/';
-      }
-  }
-EOF
-	    ;;
-	    esac
-
-	    cat <<"EOF"
-  XFREE (target_name);
-  XFREE (actual_cwrapper_path);
-  XFREE (actual_cwrapper_name);
-
-  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
-  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
-  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
-     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
-     because on Windows, both *_VARNAMEs are PATH but uninstalled
-     libraries must come first. */
-  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
-  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
-
-  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
-		  nonnull (lt_argv_zero));
-  for (i = 0; i < newargc; i++)
-    {
-      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
-		      i, nonnull (newargz[i]));
-    }
-
-EOF
-
-	    case $host_os in
-	      mingw*)
-		cat <<"EOF"
-  /* execv doesn't actually work on mingw as expected on unix */
-  newargz = prepare_spawn (newargz);
-  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
-  if (rval == -1)
-    {
-      /* failed to start process */
-      lt_debugprintf (__FILE__, __LINE__,
-		      "(main) failed to launch target \"%s\": %s\n",
-		      lt_argv_zero, nonnull (strerror (errno)));
-      return 127;
-    }
-  return rval;
-EOF
-		;;
-	      *)
-		cat <<"EOF"
-  execv (lt_argv_zero, newargz);
-  return rval; /* =127, but avoids unused variable warning */
-EOF
-		;;
-	    esac
-
-	    cat <<"EOF"
-}
-
-void *
-xmalloc (size_t num)
-{
-  void *p = (void *) malloc (num);
-  if (!p)
-    lt_fatal (__FILE__, __LINE__, "memory exhausted");
-
-  return p;
-}
-
-char *
-xstrdup (const char *string)
-{
-  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
-			  string) : NULL;
-}
-
-const char *
-base_name (const char *name)
-{
-  const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  /* Skip over the disk name in MSDOS pathnames. */
-  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
-    name += 2;
-#endif
-
-  for (base = name; *name; name++)
-    if (IS_DIR_SEPARATOR (*name))
-      base = name + 1;
-  return base;
-}
-
-int
-check_executable (const char *path)
-{
-  struct stat st;
-
-  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
-                  nonempty (path));
-  if ((!path) || (!*path))
-    return 0;
-
-  if ((stat (path, &st) >= 0)
-      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
-    return 1;
-  else
-    return 0;
-}
-
-int
-make_executable (const char *path)
-{
-  int rval = 0;
-  struct stat st;
-
-  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
-                  nonempty (path));
-  if ((!path) || (!*path))
-    return 0;
-
-  if (stat (path, &st) >= 0)
-    {
-      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
-    }
-  return rval;
-}
-
-/* Searches for the full path of the wrapper.  Returns
-   newly allocated full path name if found, NULL otherwise
-   Does not chase symlinks, even on platforms that support them.
-*/
-char *
-find_executable (const char *wrapper)
-{
-  int has_slash = 0;
-  const char *p;
-  const char *p_next;
-  /* static buffer for getcwd */
-  char tmp[LT_PATHMAX + 1];
-  int tmp_len;
-  char *concat_name;
-
-  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
-                  nonempty (wrapper));
-
-  if ((wrapper == NULL) || (*wrapper == '\0'))
-    return NULL;
-
-  /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
-    {
-      concat_name = xstrdup (wrapper);
-      if (check_executable (concat_name))
-	return concat_name;
-      XFREE (concat_name);
-    }
-  else
-    {
-#endif
-      if (IS_DIR_SEPARATOR (wrapper[0]))
-	{
-	  concat_name = xstrdup (wrapper);
-	  if (check_executable (concat_name))
-	    return concat_name;
-	  XFREE (concat_name);
-	}
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-    }
-#endif
-
-  for (p = wrapper; *p; p++)
-    if (*p == '/')
-      {
-	has_slash = 1;
-	break;
-      }
-  if (!has_slash)
-    {
-      /* no slashes; search PATH */
-      const char *path = getenv ("PATH");
-      if (path != NULL)
-	{
-	  for (p = path; *p; p = p_next)
-	    {
-	      const char *q;
-	      size_t p_len;
-	      for (q = p; *q; q++)
-		if (IS_PATH_SEPARATOR (*q))
-		  break;
-	      p_len = q - p;
-	      p_next = (*q == '\0' ? q : q + 1);
-	      if (p_len == 0)
-		{
-		  /* empty path: current directory */
-		  if (getcwd (tmp, LT_PATHMAX) == NULL)
-		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
-                              nonnull (strerror (errno)));
-		  tmp_len = strlen (tmp);
-		  concat_name =
-		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
-		  memcpy (concat_name, tmp, tmp_len);
-		  concat_name[tmp_len] = '/';
-		  strcpy (concat_name + tmp_len + 1, wrapper);
-		}
-	      else
-		{
-		  concat_name =
-		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
-		  memcpy (concat_name, p, p_len);
-		  concat_name[p_len] = '/';
-		  strcpy (concat_name + p_len + 1, wrapper);
-		}
-	      if (check_executable (concat_name))
-		return concat_name;
-	      XFREE (concat_name);
-	    }
-	}
-      /* not found in PATH; assume curdir */
-    }
-  /* Relative path | not found in path: prepend cwd */
-  if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
-              nonnull (strerror (errno)));
-  tmp_len = strlen (tmp);
-  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
-  memcpy (concat_name, tmp, tmp_len);
-  concat_name[tmp_len] = '/';
-  strcpy (concat_name + tmp_len + 1, wrapper);
-
-  if (check_executable (concat_name))
-    return concat_name;
-  XFREE (concat_name);
-  return NULL;
-}
-
-char *
-chase_symlinks (const char *pathspec)
-{
-#ifndef S_ISLNK
-  return xstrdup (pathspec);
-#else
-  char buf[LT_PATHMAX];
-  struct stat s;
-  char *tmp_pathspec = xstrdup (pathspec);
-  char *p;
-  int has_symlinks = 0;
-  while (strlen (tmp_pathspec) && !has_symlinks)
-    {
-      lt_debugprintf (__FILE__, __LINE__,
-		      "checking path component for symlinks: %s\n",
-		      tmp_pathspec);
-      if (lstat (tmp_pathspec, &s) == 0)
-	{
-	  if (S_ISLNK (s.st_mode) != 0)
-	    {
-	      has_symlinks = 1;
-	      break;
-	    }
-
-	  /* search backwards for last DIR_SEPARATOR */
-	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
-	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
-	    p--;
-	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
-	    {
-	      /* no more DIR_SEPARATORS left */
-	      break;
-	    }
-	  *p = '\0';
-	}
-      else
-	{
-	  lt_fatal (__FILE__, __LINE__,
-		    "error accessing file \"%s\": %s",
-		    tmp_pathspec, nonnull (strerror (errno)));
-	}
-    }
-  XFREE (tmp_pathspec);
-
-  if (!has_symlinks)
-    {
-      return xstrdup (pathspec);
-    }
-
-  tmp_pathspec = realpath (pathspec, buf);
-  if (tmp_pathspec == 0)
-    {
-      lt_fatal (__FILE__, __LINE__,
-		"could not follow symlinks for %s", pathspec);
-    }
-  return xstrdup (tmp_pathspec);
-#endif
-}
-
-char *
-strendzap (char *str, const char *pat)
-{
-  size_t len, patlen;
-
-  assert (str != NULL);
-  assert (pat != NULL);
-
-  len = strlen (str);
-  patlen = strlen (pat);
-
-  if (patlen <= len)
-    {
-      str += len - patlen;
-      if (strcmp (str, pat) == 0)
-	*str = '\0';
-    }
-  return str;
-}
-
-void
-lt_debugprintf (const char *file, int line, const char *fmt, ...)
-{
-  va_list args;
-  if (lt_debug)
-    {
-      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
-      va_start (args, fmt);
-      (void) vfprintf (stderr, fmt, args);
-      va_end (args);
-    }
-}
-
-static void
-lt_error_core (int exit_status, const char *file,
-	       int line, const char *mode,
-	       const char *message, va_list ap)
-{
-  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
-  vfprintf (stderr, message, ap);
-  fprintf (stderr, ".\n");
-
-  if (exit_status >= 0)
-    exit (exit_status);
-}
-
-void
-lt_fatal (const char *file, int line, const char *message, ...)
-{
-  va_list ap;
-  va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
-  va_end (ap);
-}
-
-static const char *
-nonnull (const char *s)
-{
-  return s ? s : "(null)";
-}
-
-static const char *
-nonempty (const char *s)
-{
-  return (s && !*s) ? "(empty)" : nonnull (s);
-}
-
-void
-lt_setenv (const char *name, const char *value)
-{
-  lt_debugprintf (__FILE__, __LINE__,
-		  "(lt_setenv) setting '%s' to '%s'\n",
-                  nonnull (name), nonnull (value));
-  {
-#ifdef HAVE_SETENV
-    /* always make a copy, for consistency with !HAVE_SETENV */
-    char *str = xstrdup (value);
-    setenv (name, str, 1);
-#else
-    int len = strlen (name) + 1 + strlen (value) + 1;
-    char *str = XMALLOC (char, len);
-    sprintf (str, "%s=%s", name, value);
-    if (putenv (str) != EXIT_SUCCESS)
-      {
-        XFREE (str);
-      }
-#endif
-  }
-}
-
-char *
-lt_extend_str (const char *orig_value, const char *add, int to_end)
-{
-  char *new_value;
-  if (orig_value && *orig_value)
-    {
-      int orig_value_len = strlen (orig_value);
-      int add_len = strlen (add);
-      new_value = XMALLOC (char, add_len + orig_value_len + 1);
-      if (to_end)
-        {
-          strcpy (new_value, orig_value);
-          strcpy (new_value + orig_value_len, add);
-        }
-      else
-        {
-          strcpy (new_value, add);
-          strcpy (new_value + add_len, orig_value);
-        }
-    }
-  else
-    {
-      new_value = xstrdup (add);
-    }
-  return new_value;
-}
-
-void
-lt_update_exe_path (const char *name, const char *value)
-{
-  lt_debugprintf (__FILE__, __LINE__,
-		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
-                  nonnull (name), nonnull (value));
-
-  if (name && *name && value && *value)
-    {
-      char *new_value = lt_extend_str (getenv (name), value, 0);
-      /* some systems can't cope with a ':'-terminated path #' */
-      int len = strlen (new_value);
-      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
-        {
-          new_value[len-1] = '\0';
-        }
-      lt_setenv (name, new_value);
-      XFREE (new_value);
-    }
-}
-
-void
-lt_update_lib_path (const char *name, const char *value)
-{
-  lt_debugprintf (__FILE__, __LINE__,
-		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
-                  nonnull (name), nonnull (value));
-
-  if (name && *name && value && *value)
-    {
-      char *new_value = lt_extend_str (getenv (name), value, 0);
-      lt_setenv (name, new_value);
-      XFREE (new_value);
-    }
-}
-
-EOF
-	    case $host_os in
-	      mingw*)
-		cat <<"EOF"
-
-/* Prepares an argument vector before calling spawn().
-   Note that spawn() does not by itself call the command interpreter
-     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
-      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
-         GetVersionEx(&v);
-         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
-      }) ? "cmd.exe" : "command.com").
-   Instead it simply concatenates the arguments, separated by ' ', and calls
-   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
-   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
-   special way:
-   - Space and tab are interpreted as delimiters. They are not treated as
-     delimiters if they are surrounded by double quotes: "...".
-   - Unescaped double quotes are removed from the input. Their only effect is
-     that within double quotes, space and tab are treated like normal
-     characters.
-   - Backslashes not followed by double quotes are not special.
-   - But 2*n+1 backslashes followed by a double quote become
-     n backslashes followed by a double quote (n >= 0):
-       \" -> "
-       \\\" -> \"
-       \\\\\" -> \\"
- */
-#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
-#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
-char **
-prepare_spawn (char **argv)
-{
-  size_t argc;
-  char **new_argv;
-  size_t i;
-
-  /* Count number of arguments.  */
-  for (argc = 0; argv[argc] != NULL; argc++)
-    ;
-
-  /* Allocate new argument vector.  */
-  new_argv = XMALLOC (char *, argc + 1);
-
-  /* Put quoted arguments into the new argument vector.  */
-  for (i = 0; i < argc; i++)
-    {
-      const char *string = argv[i];
-
-      if (string[0] == '\0')
-	new_argv[i] = xstrdup ("\"\"");
-      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
-	{
-	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
-	  size_t length;
-	  unsigned int backslashes;
-	  const char *s;
-	  char *quoted_string;
-	  char *p;
-
-	  length = 0;
-	  backslashes = 0;
-	  if (quote_around)
-	    length++;
-	  for (s = string; *s != '\0'; s++)
-	    {
-	      char c = *s;
-	      if (c == '"')
-		length += backslashes + 1;
-	      length++;
-	      if (c == '\\')
-		backslashes++;
-	      else
-		backslashes = 0;
-	    }
-	  if (quote_around)
-	    length += backslashes + 1;
-
-	  quoted_string = XMALLOC (char, length + 1);
-
-	  p = quoted_string;
-	  backslashes = 0;
-	  if (quote_around)
-	    *p++ = '"';
-	  for (s = string; *s != '\0'; s++)
-	    {
-	      char c = *s;
-	      if (c == '"')
-		{
-		  unsigned int j;
-		  for (j = backslashes + 1; j > 0; j--)
-		    *p++ = '\\';
-		}
-	      *p++ = c;
-	      if (c == '\\')
-		backslashes++;
-	      else
-		backslashes = 0;
-	    }
-	  if (quote_around)
-	    {
-	      unsigned int j;
-	      for (j = backslashes; j > 0; j--)
-		*p++ = '\\';
-	      *p++ = '"';
-	    }
-	  *p = '\0';
-
-	  new_argv[i] = quoted_string;
-	}
-      else
-	new_argv[i] = (char *) string;
-    }
-  new_argv[argc] = NULL;
-
-  return new_argv;
-}
-EOF
-		;;
-	    esac
-
-            cat <<"EOF"
-void lt_dump_script (FILE* f)
-{
-EOF
-	    func_emit_wrapper yes |
-	      $SED -n -e '
-s/^\(.\{79\}\)\(..*\)/\1\
-\2/
-h
-s/\([\\"]\)/\\\1/g
-s/$/\\n/
-s/\([^\n]*\).*/  fputs ("\1", f);/p
-g
-D'
-            cat <<"EOF"
-}
-EOF
-}
-# end: func_emit_cwrapperexe_src
-
-# func_win32_import_lib_p ARG
-# True if ARG is an import lib, as indicated by $file_magic_cmd
-func_win32_import_lib_p ()
-{
-    $opt_debug
-    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
-    *import*) : ;;
-    *) false ;;
-    esac
-}
-
-# func_mode_link arg...
-func_mode_link ()
-{
-    $opt_debug
-    case $host in
-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-      # It is impossible to link a dll without this setting, and
-      # we shouldn't force the makefile maintainer to figure out
-      # which system we are compiling for in order to pass an extra
-      # flag for every libtool invocation.
-      # allow_undefined=no
-
-      # FIXME: Unfortunately, there are problems with the above when trying
-      # to make a dll which has undefined symbols, in which case not
-      # even a static library is built.  For now, we need to specify
-      # -no-undefined on the libtool link line when we can be certain
-      # that all symbols are satisfied, otherwise we get a static library.
-      allow_undefined=yes
-      ;;
-    *)
-      allow_undefined=yes
-      ;;
-    esac
-    libtool_args=$nonopt
-    base_compile="$nonopt $@"
-    compile_command=$nonopt
-    finalize_command=$nonopt
-
-    compile_rpath=
-    finalize_rpath=
-    compile_shlibpath=
-    finalize_shlibpath=
-    convenience=
-    old_convenience=
-    deplibs=
-    old_deplibs=
-    compiler_flags=
-    linker_flags=
-    dllsearchpath=
-    lib_search_path=`pwd`
-    inst_prefix_dir=
-    new_inherited_linker_flags=
-
-    avoid_version=no
-    bindir=
-    dlfiles=
-    dlprefiles=
-    dlself=no
-    export_dynamic=no
-    export_symbols=
-    export_symbols_regex=
-    generated=
-    libobjs=
-    ltlibs=
-    module=no
-    no_install=no
-    objs=
-    non_pic_objects=
-    precious_files_regex=
-    prefer_static_libs=no
-    preload=no
-    prev=
-    prevarg=
-    release=
-    rpath=
-    xrpath=
-    perm_rpath=
-    temp_rpath=
-    thread_safe=no
-    vinfo=
-    vinfo_number=no
-    weak_libs=
-    single_module="${wl}-single_module"
-    func_infer_tag $base_compile
-
-    # We need to know -static, to get the right output filenames.
-    for arg
-    do
-      case $arg in
-      -shared)
-	test "$build_libtool_libs" != yes && \
-	  func_fatal_configuration "can not build a shared library"
-	build_old_libs=no
-	break
-	;;
-      -all-static | -static | -static-libtool-libs)
-	case $arg in
-	-all-static)
-	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-	    func_warning "complete static linking is impossible in this configuration"
-	  fi
-	  if test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	  prefer_static_libs=yes
-	  ;;
-	-static)
-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	  prefer_static_libs=built
-	  ;;
-	-static-libtool-libs)
-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	  prefer_static_libs=yes
-	  ;;
-	esac
-	build_libtool_libs=no
-	build_old_libs=yes
-	break
-	;;
-      esac
-    done
-
-    # See if our shared archives depend on static archives.
-    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
-    # Go through the arguments, transforming them on the way.
-    while test "$#" -gt 0; do
-      arg="$1"
-      shift
-      func_quote_for_eval "$arg"
-      qarg=$func_quote_for_eval_unquoted_result
-      func_append libtool_args " $func_quote_for_eval_result"
-
-      # If the previous option needs an argument, assign it.
-      if test -n "$prev"; then
-	case $prev in
-	output)
-	  func_append compile_command " @OUTPUT@"
-	  func_append finalize_command " @OUTPUT@"
-	  ;;
-	esac
-
-	case $prev in
-	bindir)
-	  bindir="$arg"
-	  prev=
-	  continue
-	  ;;
-	dlfiles|dlprefiles)
-	  if test "$preload" = no; then
-	    # Add the symbol object into the linking commands.
-	    func_append compile_command " @SYMFILE@"
-	    func_append finalize_command " @SYMFILE@"
-	    preload=yes
-	  fi
-	  case $arg in
-	  *.la | *.lo) ;;  # We handle these cases below.
-	  force)
-	    if test "$dlself" = no; then
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  self)
-	    if test "$prev" = dlprefiles; then
-	      dlself=yes
-	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
-	      dlself=yes
-	    else
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  *)
-	    if test "$prev" = dlfiles; then
-	      func_append dlfiles " $arg"
-	    else
-	      func_append dlprefiles " $arg"
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  esac
-	  ;;
-	expsyms)
-	  export_symbols="$arg"
-	  test -f "$arg" \
-	    || func_fatal_error "symbol file \`$arg' does not exist"
-	  prev=
-	  continue
-	  ;;
-	expsyms_regex)
-	  export_symbols_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	framework)
-	  case $host in
-	    *-*-darwin*)
-	      case "$deplibs " in
-		*" $qarg.ltframework "*) ;;
-		*) func_append deplibs " $qarg.ltframework" # this is fixed later
-		   ;;
-	      esac
-	      ;;
-	  esac
-	  prev=
-	  continue
-	  ;;
-	inst_prefix)
-	  inst_prefix_dir="$arg"
-	  prev=
-	  continue
-	  ;;
-	objectlist)
-	  if test -f "$arg"; then
-	    save_arg=$arg
-	    moreargs=
-	    for fil in `cat "$save_arg"`
-	    do
-#	      func_append moreargs " $fil"
-	      arg=$fil
-	      # A libtool-controlled object.
-
-	      # Check to see that this really is a libtool object.
-	      if func_lalib_unsafe_p "$arg"; then
-		pic_object=
-		non_pic_object=
-
-		# Read the .lo file
-		func_source "$arg"
-
-		if test -z "$pic_object" ||
-		   test -z "$non_pic_object" ||
-		   test "$pic_object" = none &&
-		   test "$non_pic_object" = none; then
-		  func_fatal_error "cannot find name of object for \`$arg'"
-		fi
-
-		# Extract subdirectory from the argument.
-		func_dirname "$arg" "/" ""
-		xdir="$func_dirname_result"
-
-		if test "$pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  pic_object="$xdir$pic_object"
-
-		  if test "$prev" = dlfiles; then
-		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		      func_append dlfiles " $pic_object"
-		      prev=
-		      continue
-		    else
-		      # If libtool objects are unsupported, then we need to preload.
-		      prev=dlprefiles
-		    fi
-		  fi
-
-		  # CHECK ME:  I think I busted this.  -Ossama
-		  if test "$prev" = dlprefiles; then
-		    # Preload the old-style object.
-		    func_append dlprefiles " $pic_object"
-		    prev=
-		  fi
-
-		  # A PIC object.
-		  func_append libobjs " $pic_object"
-		  arg="$pic_object"
-		fi
-
-		# Non-PIC object.
-		if test "$non_pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  non_pic_object="$xdir$non_pic_object"
-
-		  # A standard non-PIC object
-		  func_append non_pic_objects " $non_pic_object"
-		  if test -z "$pic_object" || test "$pic_object" = none ; then
-		    arg="$non_pic_object"
-		  fi
-		else
-		  # If the PIC object exists, use it instead.
-		  # $xdir was prepended to $pic_object above.
-		  non_pic_object="$pic_object"
-		  func_append non_pic_objects " $non_pic_object"
-		fi
-	      else
-		# Only an error if not doing a dry-run.
-		if $opt_dry_run; then
-		  # Extract subdirectory from the argument.
-		  func_dirname "$arg" "/" ""
-		  xdir="$func_dirname_result"
-
-		  func_lo2o "$arg"
-		  pic_object=$xdir$objdir/$func_lo2o_result
-		  non_pic_object=$xdir$func_lo2o_result
-		  func_append libobjs " $pic_object"
-		  func_append non_pic_objects " $non_pic_object"
-	        else
-		  func_fatal_error "\`$arg' is not a valid libtool object"
-		fi
-	      fi
-	    done
-	  else
-	    func_fatal_error "link input file \`$arg' does not exist"
-	  fi
-	  arg=$save_arg
-	  prev=
-	  continue
-	  ;;
-	precious_regex)
-	  precious_files_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	release)
-	  release="-$arg"
-	  prev=
-	  continue
-	  ;;
-	rpath | xrpath)
-	  # We need an absolute path.
-	  case $arg in
-	  [\\/]* | [A-Za-z]:[\\/]*) ;;
-	  *)
-	    func_fatal_error "only absolute run-paths are allowed"
-	    ;;
-	  esac
-	  if test "$prev" = rpath; then
-	    case "$rpath " in
-	    *" $arg "*) ;;
-	    *) func_append rpath " $arg" ;;
-	    esac
-	  else
-	    case "$xrpath " in
-	    *" $arg "*) ;;
-	    *) func_append xrpath " $arg" ;;
-	    esac
-	  fi
-	  prev=
-	  continue
-	  ;;
-	shrext)
-	  shrext_cmds="$arg"
-	  prev=
-	  continue
-	  ;;
-	weak)
-	  func_append weak_libs " $arg"
-	  prev=
-	  continue
-	  ;;
-	xcclinker)
-	  func_append linker_flags " $qarg"
-	  func_append compiler_flags " $qarg"
-	  prev=
-	  func_append compile_command " $qarg"
-	  func_append finalize_command " $qarg"
-	  continue
-	  ;;
-	xcompiler)
-	  func_append compiler_flags " $qarg"
-	  prev=
-	  func_append compile_command " $qarg"
-	  func_append finalize_command " $qarg"
-	  continue
-	  ;;
-	xlinker)
-	  func_append linker_flags " $qarg"
-	  func_append compiler_flags " $wl$qarg"
-	  prev=
-	  func_append compile_command " $wl$qarg"
-	  func_append finalize_command " $wl$qarg"
-	  continue
-	  ;;
-	*)
-	  eval "$prev=\"\$arg\""
-	  prev=
-	  continue
-	  ;;
-	esac
-      fi # test -n "$prev"
-
-      prevarg="$arg"
-
-      case $arg in
-      -all-static)
-	if test -n "$link_static_flag"; then
-	  # See comment for -static flag below, for more details.
-	  func_append compile_command " $link_static_flag"
-	  func_append finalize_command " $link_static_flag"
-	fi
-	continue
-	;;
-
-      -allow-undefined)
-	# FIXME: remove this flag sometime in the future.
-	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
-	;;
-
-      -avoid-version)
-	avoid_version=yes
-	continue
-	;;
-
-      -bindir)
-	prev=bindir
-	continue
-	;;
-
-      -dlopen)
-	prev=dlfiles
-	continue
-	;;
-
-      -dlpreopen)
-	prev=dlprefiles
-	continue
-	;;
-
-      -export-dynamic)
-	export_dynamic=yes
-	continue
-	;;
-
-      -export-symbols | -export-symbols-regex)
-	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  func_fatal_error "more than one -exported-symbols argument is not allowed"
-	fi
-	if test "X$arg" = "X-export-symbols"; then
-	  prev=expsyms
-	else
-	  prev=expsyms_regex
-	fi
-	continue
-	;;
-
-      -framework)
-	prev=framework
-	continue
-	;;
-
-      -inst-prefix-dir)
-	prev=inst_prefix
-	continue
-	;;
-
-      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
-      # so, if we see these flags be careful not to treat them like -L
-      -L[A-Z][A-Z]*:*)
-	case $with_gcc/$host in
-	no/*-*-irix* | /*-*-irix*)
-	  func_append compile_command " $arg"
-	  func_append finalize_command " $arg"
-	  ;;
-	esac
-	continue
-	;;
-
-      -L*)
-	func_stripname "-L" '' "$arg"
-	if test -z "$func_stripname_result"; then
-	  if test "$#" -gt 0; then
-	    func_fatal_error "require no space between \`-L' and \`$1'"
-	  else
-	    func_fatal_error "need path for \`-L' option"
-	  fi
-	fi
-	func_resolve_sysroot "$func_stripname_result"
-	dir=$func_resolve_sysroot_result
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  absdir=`cd "$dir" && pwd`
-	  test -z "$absdir" && \
-	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
-	  dir="$absdir"
-	  ;;
-	esac
-	case "$deplibs " in
-	*" -L$dir "* | *" $arg "*)
-	  # Will only happen for absolute or sysroot arguments
-	  ;;
-	*)
-	  # Preserve sysroot, but never include relative directories
-	  case $dir in
-	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
-	    *) func_append deplibs " -L$dir" ;;
-	  esac
-	  func_append lib_search_path " $dir"
-	  ;;
-	esac
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
-	  case :$dllsearchpath: in
-	  *":$dir:"*) ;;
-	  ::) dllsearchpath=$dir;;
-	  *) func_append dllsearchpath ":$dir";;
-	  esac
-	  case :$dllsearchpath: in
-	  *":$testbindir:"*) ;;
-	  ::) dllsearchpath=$testbindir;;
-	  *) func_append dllsearchpath ":$testbindir";;
-	  esac
-	  ;;
-	esac
-	continue
-	;;
-
-      -l*)
-	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
-	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
-	    # These systems don't actually have a C or math library (as such)
-	    continue
-	    ;;
-	  *-*-os2*)
-	    # These systems don't actually have a C library (as such)
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C and math libraries are in the System framework
-	    func_append deplibs " System.ltframework"
-	    continue
-	    ;;
-	  *-*-sco3.2v5* | *-*-sco5v6*)
-	    # Causes problems with __ctype
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-	    # Compiler inserts libc in the correct place for threads to work
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  esac
-	elif test "X$arg" = "X-lc_r"; then
-	 case $host in
-	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	   # Do not include libc_r directly, use -pthread flag.
-	   continue
-	   ;;
-	 esac
-	fi
-	func_append deplibs " $arg"
-	continue
-	;;
-
-      -module)
-	module=yes
-	continue
-	;;
-
-      # Tru64 UNIX uses -model [arg] to determine the layout of C++
-      # classes, name mangling, and exception handling.
-      # Darwin uses the -arch flag to determine output architecture.
-      -model|-arch|-isysroot|--sysroot)
-	func_append compiler_flags " $arg"
-	func_append compile_command " $arg"
-	func_append finalize_command " $arg"
-	prev=xcompiler
-	continue
-	;;
-
-      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
-      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
-	func_append compiler_flags " $arg"
-	func_append compile_command " $arg"
-	func_append finalize_command " $arg"
-	case "$new_inherited_linker_flags " in
-	    *" $arg "*) ;;
-	    * ) func_append new_inherited_linker_flags " $arg" ;;
-	esac
-	continue
-	;;
-
-      -multi_module)
-	single_module="${wl}-multi_module"
-	continue
-	;;
-
-      -no-fast-install)
-	fast_install=no
-	continue
-	;;
-
-      -no-install)
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
-	  # The PATH hackery in wrapper scripts is required on Windows
-	  # and Darwin in order for the loader to find any dlls it needs.
-	  func_warning "\`-no-install' is ignored for $host"
-	  func_warning "assuming \`-no-fast-install' instead"
-	  fast_install=no
-	  ;;
-	*) no_install=yes ;;
-	esac
-	continue
-	;;
-
-      -no-undefined)
-	allow_undefined=no
-	continue
-	;;
-
-      -objectlist)
-	prev=objectlist
-	continue
-	;;
-
-      -o) prev=output ;;
-
-      -precious-files-regex)
-	prev=precious_regex
-	continue
-	;;
-
-      -release)
-	prev=release
-	continue
-	;;
-
-      -rpath)
-	prev=rpath
-	continue
-	;;
-
-      -R)
-	prev=xrpath
-	continue
-	;;
-
-      -R*)
-	func_stripname '-R' '' "$arg"
-	dir=$func_stripname_result
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	=*)
-	  func_stripname '=' '' "$dir"
-	  dir=$lt_sysroot$func_stripname_result
-	  ;;
-	*)
-	  func_fatal_error "only absolute run-paths are allowed"
-	  ;;
-	esac
-	case "$xrpath " in
-	*" $dir "*) ;;
-	*) func_append xrpath " $dir" ;;
-	esac
-	continue
-	;;
-
-      -shared)
-	# The effects of -shared are defined in a previous loop.
-	continue
-	;;
-
-      -shrext)
-	prev=shrext
-	continue
-	;;
-
-      -static | -static-libtool-libs)
-	# The effects of -static are defined in a previous loop.
-	# We used to do the same as -all-static on platforms that
-	# didn't have a PIC flag, but the assumption that the effects
-	# would be equivalent was wrong.  It would break on at least
-	# Digital Unix and AIX.
-	continue
-	;;
-
-      -thread-safe)
-	thread_safe=yes
-	continue
-	;;
-
-      -version-info)
-	prev=vinfo
-	continue
-	;;
-
-      -version-number)
-	prev=vinfo
-	vinfo_number=yes
-	continue
-	;;
-
-      -weak)
-        prev=weak
-	continue
-	;;
-
-      -Wc,*)
-	func_stripname '-Wc,' '' "$arg"
-	args=$func_stripname_result
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-          func_quote_for_eval "$flag"
-	  func_append arg " $func_quote_for_eval_result"
-	  func_append compiler_flags " $func_quote_for_eval_result"
-	done
-	IFS="$save_ifs"
-	func_stripname ' ' '' "$arg"
-	arg=$func_stripname_result
-	;;
-
-      -Wl,*)
-	func_stripname '-Wl,' '' "$arg"
-	args=$func_stripname_result
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-          func_quote_for_eval "$flag"
-	  func_append arg " $wl$func_quote_for_eval_result"
-	  func_append compiler_flags " $wl$func_quote_for_eval_result"
-	  func_append linker_flags " $func_quote_for_eval_result"
-	done
-	IFS="$save_ifs"
-	func_stripname ' ' '' "$arg"
-	arg=$func_stripname_result
-	;;
-
-      -Xcompiler)
-	prev=xcompiler
-	continue
-	;;
-
-      -Xlinker)
-	prev=xlinker
-	continue
-	;;
-
-      -XCClinker)
-	prev=xcclinker
-	continue
-	;;
-
-      # -msg_* for osf cc
-      -msg_*)
-	func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
-	;;
-
-      # Flags to be passed through unchanged, with rationale:
-      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
-      # -r[0-9][0-9]*        specify processor for the SGI compiler
-      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
-      # +DA*, +DD*           enable 64-bit mode for the HP compiler
-      # -q*                  compiler args for the IBM compiler
-      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
-      # -F/path              path to uninstalled frameworks, gcc on darwin
-      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
-      # @file                GCC response files
-      # -tp=*                Portland pgcc target processor selection
-      # --sysroot=*          for sysroot support
-      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
-      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
-      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
-        func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
-        func_append compile_command " $arg"
-        func_append finalize_command " $arg"
-        func_append compiler_flags " $arg"
-        continue
-        ;;
-
-      # Some other compiler flag.
-      -* | +*)
-        func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
-	;;
-
-      *.$objext)
-	# A standard object.
-	func_append objs " $arg"
-	;;
-
-      *.lo)
-	# A libtool-controlled object.
-
-	# Check to see that this really is a libtool object.
-	if func_lalib_unsafe_p "$arg"; then
-	  pic_object=
-	  non_pic_object=
-
-	  # Read the .lo file
-	  func_source "$arg"
-
-	  if test -z "$pic_object" ||
-	     test -z "$non_pic_object" ||
-	     test "$pic_object" = none &&
-	     test "$non_pic_object" = none; then
-	    func_fatal_error "cannot find name of object for \`$arg'"
-	  fi
-
-	  # Extract subdirectory from the argument.
-	  func_dirname "$arg" "/" ""
-	  xdir="$func_dirname_result"
-
-	  if test "$pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    pic_object="$xdir$pic_object"
-
-	    if test "$prev" = dlfiles; then
-	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		func_append dlfiles " $pic_object"
-		prev=
-		continue
-	      else
-		# If libtool objects are unsupported, then we need to preload.
-		prev=dlprefiles
-	      fi
-	    fi
-
-	    # CHECK ME:  I think I busted this.  -Ossama
-	    if test "$prev" = dlprefiles; then
-	      # Preload the old-style object.
-	      func_append dlprefiles " $pic_object"
-	      prev=
-	    fi
-
-	    # A PIC object.
-	    func_append libobjs " $pic_object"
-	    arg="$pic_object"
-	  fi
-
-	  # Non-PIC object.
-	  if test "$non_pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    non_pic_object="$xdir$non_pic_object"
-
-	    # A standard non-PIC object
-	    func_append non_pic_objects " $non_pic_object"
-	    if test -z "$pic_object" || test "$pic_object" = none ; then
-	      arg="$non_pic_object"
-	    fi
-	  else
-	    # If the PIC object exists, use it instead.
-	    # $xdir was prepended to $pic_object above.
-	    non_pic_object="$pic_object"
-	    func_append non_pic_objects " $non_pic_object"
-	  fi
-	else
-	  # Only an error if not doing a dry-run.
-	  if $opt_dry_run; then
-	    # Extract subdirectory from the argument.
-	    func_dirname "$arg" "/" ""
-	    xdir="$func_dirname_result"
-
-	    func_lo2o "$arg"
-	    pic_object=$xdir$objdir/$func_lo2o_result
-	    non_pic_object=$xdir$func_lo2o_result
-	    func_append libobjs " $pic_object"
-	    func_append non_pic_objects " $non_pic_object"
-	  else
-	    func_fatal_error "\`$arg' is not a valid libtool object"
-	  fi
-	fi
-	;;
-
-      *.$libext)
-	# An archive.
-	func_append deplibs " $arg"
-	func_append old_deplibs " $arg"
-	continue
-	;;
-
-      *.la)
-	# A libtool-controlled library.
-
-	func_resolve_sysroot "$arg"
-	if test "$prev" = dlfiles; then
-	  # This library was specified with -dlopen.
-	  func_append dlfiles " $func_resolve_sysroot_result"
-	  prev=
-	elif test "$prev" = dlprefiles; then
-	  # The library was specified with -dlpreopen.
-	  func_append dlprefiles " $func_resolve_sysroot_result"
-	  prev=
-	else
-	  func_append deplibs " $func_resolve_sysroot_result"
-	fi
-	continue
-	;;
-
-      # Some other compiler argument.
-      *)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
-	;;
-      esac # arg
-
-      # Now actually substitute the argument into the commands.
-      if test -n "$arg"; then
-	func_append compile_command " $arg"
-	func_append finalize_command " $arg"
-      fi
-    done # argument parsing loop
-
-    test -n "$prev" && \
-      func_fatal_help "the \`$prevarg' option requires an argument"
-
-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-      eval arg=\"$export_dynamic_flag_spec\"
-      func_append compile_command " $arg"
-      func_append finalize_command " $arg"
-    fi
-
-    oldlibs=
-    # calculate the name of the file, without its directory
-    func_basename "$output"
-    outputname="$func_basename_result"
-    libobjs_save="$libobjs"
-
-    if test -n "$shlibpath_var"; then
-      # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
-    else
-      shlib_search_path=
-    fi
-    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
-    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
-    func_dirname "$output" "/" ""
-    output_objdir="$func_dirname_result$objdir"
-    func_to_tool_file "$output_objdir/"
-    tool_output_objdir=$func_to_tool_file_result
-    # Create the object directory.
-    func_mkdir_p "$output_objdir"
-
-    # Determine the type of output
-    case $output in
-    "")
-      func_fatal_help "you must specify an output file"
-      ;;
-    *.$libext) linkmode=oldlib ;;
-    *.lo | *.$objext) linkmode=obj ;;
-    *.la) linkmode=lib ;;
-    *) linkmode=prog ;; # Anything else should be a program.
-    esac
-
-    specialdeplibs=
-
-    libs=
-    # Find all interdependent deplibs by searching for libraries
-    # that are linked more than once (e.g. -la -lb -la)
-    for deplib in $deplibs; do
-      if $opt_preserve_dup_deps ; then
-	case "$libs " in
-	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
-	esac
-      fi
-      func_append libs " $deplib"
-    done
-
-    if test "$linkmode" = lib; then
-      libs="$predeps $libs $compiler_lib_search_path $postdeps"
-
-      # Compute libraries that are listed more than once in $predeps
-      # $postdeps and mark them as special (i.e., whose duplicates are
-      # not to be eliminated).
-      pre_post_deps=
-      if $opt_duplicate_compiler_generated_deps; then
-	for pre_post_dep in $predeps $postdeps; do
-	  case "$pre_post_deps " in
-	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
-	  esac
-	  func_append pre_post_deps " $pre_post_dep"
-	done
-      fi
-      pre_post_deps=
-    fi
-
-    deplibs=
-    newdependency_libs=
-    newlib_search_path=
-    need_relink=no # whether we're linking any uninstalled libtool libraries
-    notinst_deplibs= # not-installed libtool libraries
-    notinst_path= # paths that contain not-installed libtool libraries
-
-    case $linkmode in
-    lib)
-	passes="conv dlpreopen link"
-	for file in $dlfiles $dlprefiles; do
-	  case $file in
-	  *.la) ;;
-	  *)
-	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
-	    ;;
-	  esac
-	done
-	;;
-    prog)
-	compile_deplibs=
-	finalize_deplibs=
-	alldeplibs=no
-	newdlfiles=
-	newdlprefiles=
-	passes="conv scan dlopen dlpreopen link"
-	;;
-    *)  passes="conv"
-	;;
-    esac
-
-    for pass in $passes; do
-      # The preopen pass in lib mode reverses $deplibs; put it back here
-      # so that -L comes before libs that need it for instance...
-      if test "$linkmode,$pass" = "lib,link"; then
-	## FIXME: Find the place where the list is rebuilt in the wrong
-	##        order, and fix it there properly
-        tmp_deplibs=
-	for deplib in $deplibs; do
-	  tmp_deplibs="$deplib $tmp_deplibs"
-	done
-	deplibs="$tmp_deplibs"
-      fi
-
-      if test "$linkmode,$pass" = "lib,link" ||
-	 test "$linkmode,$pass" = "prog,scan"; then
-	libs="$deplibs"
-	deplibs=
-      fi
-      if test "$linkmode" = prog; then
-	case $pass in
-	dlopen) libs="$dlfiles" ;;
-	dlpreopen) libs="$dlprefiles" ;;
-	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
-	esac
-      fi
-      if test "$linkmode,$pass" = "lib,dlpreopen"; then
-	# Collect and forward deplibs of preopened libtool libs
-	for lib in $dlprefiles; do
-	  # Ignore non-libtool-libs
-	  dependency_libs=
-	  func_resolve_sysroot "$lib"
-	  case $lib in
-	  *.la)	func_source "$func_resolve_sysroot_result" ;;
-	  esac
-
-	  # Collect preopened libtool deplibs, except any this library
-	  # has declared as weak libs
-	  for deplib in $dependency_libs; do
-	    func_basename "$deplib"
-            deplib_base=$func_basename_result
-	    case " $weak_libs " in
-	    *" $deplib_base "*) ;;
-	    *) func_append deplibs " $deplib" ;;
-	    esac
-	  done
-	done
-	libs="$dlprefiles"
-      fi
-      if test "$pass" = dlopen; then
-	# Collect dlpreopened libraries
-	save_deplibs="$deplibs"
-	deplibs=
-      fi
-
-      for deplib in $libs; do
-	lib=
-	found=no
-	case $deplib in
-	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
-        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
-	  if test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$deplib $compile_deplibs"
-	    finalize_deplibs="$deplib $finalize_deplibs"
-	  else
-	    func_append compiler_flags " $deplib"
-	    if test "$linkmode" = lib ; then
-		case "$new_inherited_linker_flags " in
-		    *" $deplib "*) ;;
-		    * ) func_append new_inherited_linker_flags " $deplib" ;;
-		esac
-	    fi
-	  fi
-	  continue
-	  ;;
-	-l*)
-	  if test "$linkmode" != lib && test "$linkmode" != prog; then
-	    func_warning "\`-l' is ignored for archives/objects"
-	    continue
-	  fi
-	  func_stripname '-l' '' "$deplib"
-	  name=$func_stripname_result
-	  if test "$linkmode" = lib; then
-	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
-	  else
-	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
-	  fi
-	  for searchdir in $searchdirs; do
-	    for search_ext in .la $std_shrext .so .a; do
-	      # Search the libtool library
-	      lib="$searchdir/lib${name}${search_ext}"
-	      if test -f "$lib"; then
-		if test "$search_ext" = ".la"; then
-		  found=yes
-		else
-		  found=no
-		fi
-		break 2
-	      fi
-	    done
-	  done
-	  if test "$found" != yes; then
-	    # deplib doesn't seem to be a libtool library
-	    if test "$linkmode,$pass" = "prog,link"; then
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      deplibs="$deplib $deplibs"
-	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    continue
-	  else # deplib is a libtool library
-	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
-	    # We need to do some special things here, and not later.
-	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-	      case " $predeps $postdeps " in
-	      *" $deplib "*)
-		if func_lalib_p "$lib"; then
-		  library_names=
-		  old_library=
-		  func_source "$lib"
-		  for l in $old_library $library_names; do
-		    ll="$l"
-		  done
-		  if test "X$ll" = "X$old_library" ; then # only static version available
-		    found=no
-		    func_dirname "$lib" "" "."
-		    ladir="$func_dirname_result"
-		    lib=$ladir/$old_library
-		    if test "$linkmode,$pass" = "prog,link"; then
-		      compile_deplibs="$deplib $compile_deplibs"
-		      finalize_deplibs="$deplib $finalize_deplibs"
-		    else
-		      deplibs="$deplib $deplibs"
-		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-		    fi
-		    continue
-		  fi
-		fi
-		;;
-	      *) ;;
-	      esac
-	    fi
-	  fi
-	  ;; # -l
-	*.ltframework)
-	  if test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$deplib $compile_deplibs"
-	    finalize_deplibs="$deplib $finalize_deplibs"
-	  else
-	    deplibs="$deplib $deplibs"
-	    if test "$linkmode" = lib ; then
-		case "$new_inherited_linker_flags " in
-		    *" $deplib "*) ;;
-		    * ) func_append new_inherited_linker_flags " $deplib" ;;
-		esac
-	    fi
-	  fi
-	  continue
-	  ;;
-	-L*)
-	  case $linkmode in
-	  lib)
-	    deplibs="$deplib $deplibs"
-	    test "$pass" = conv && continue
-	    newdependency_libs="$deplib $newdependency_libs"
-	    func_stripname '-L' '' "$deplib"
-	    func_resolve_sysroot "$func_stripname_result"
-	    func_append newlib_search_path " $func_resolve_sysroot_result"
-	    ;;
-	  prog)
-	    if test "$pass" = conv; then
-	      deplibs="$deplib $deplibs"
-	      continue
-	    fi
-	    if test "$pass" = scan; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    func_stripname '-L' '' "$deplib"
-	    func_resolve_sysroot "$func_stripname_result"
-	    func_append newlib_search_path " $func_resolve_sysroot_result"
-	    ;;
-	  *)
-	    func_warning "\`-L' is ignored for archives/objects"
-	    ;;
-	  esac # linkmode
-	  continue
-	  ;; # -L
-	-R*)
-	  if test "$pass" = link; then
-	    func_stripname '-R' '' "$deplib"
-	    func_resolve_sysroot "$func_stripname_result"
-	    dir=$func_resolve_sysroot_result
-	    # Make sure the xrpath contains only unique directories.
-	    case "$xrpath " in
-	    *" $dir "*) ;;
-	    *) func_append xrpath " $dir" ;;
-	    esac
-	  fi
-	  deplibs="$deplib $deplibs"
-	  continue
-	  ;;
-	*.la)
-	  func_resolve_sysroot "$deplib"
-	  lib=$func_resolve_sysroot_result
-	  ;;
-	*.$libext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	    continue
-	  fi
-	  case $linkmode in
-	  lib)
-	    # Linking convenience modules into shared libraries is allowed,
-	    # but linking other static libraries is non-portable.
-	    case " $dlpreconveniencelibs " in
-	    *" $deplib "*) ;;
-	    *)
-	      valid_a_lib=no
-	      case $deplibs_check_method in
-		match_pattern*)
-		  set dummy $deplibs_check_method; shift
-		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
-		    | $EGREP "$match_pattern_regex" > /dev/null; then
-		    valid_a_lib=yes
-		  fi
-		;;
-		pass_all)
-		  valid_a_lib=yes
-		;;
-	      esac
-	      if test "$valid_a_lib" != yes; then
-		echo
-		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because the file extensions .$libext of this argument makes me believe"
-		echo "*** that it is just a static archive that I should not use here."
-	      else
-		echo
-		$ECHO "*** Warning: Linking the shared library $output against the"
-		$ECHO "*** static library $deplib is not portable!"
-		deplibs="$deplib $deplibs"
-	      fi
-	      ;;
-	    esac
-	    continue
-	    ;;
-	  prog)
-	    if test "$pass" != link; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    continue
-	    ;;
-	  esac # linkmode
-	  ;; # *.$libext
-	*.lo | *.$objext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	  elif test "$linkmode" = prog; then
-	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-	      # If there is no dlopen support or we're linking statically,
-	      # we need to preload.
-	      func_append newdlprefiles " $deplib"
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      func_append newdlfiles " $deplib"
-	    fi
-	  fi
-	  continue
-	  ;;
-	%DEPLIBS%)
-	  alldeplibs=yes
-	  continue
-	  ;;
-	esac # case $deplib
-
-	if test "$found" = yes || test -f "$lib"; then :
-	else
-	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
-	fi
-
-	# Check to see that this really is a libtool archive.
-	func_lalib_unsafe_p "$lib" \
-	  || func_fatal_error "\`$lib' is not a valid libtool archive"
-
-	func_dirname "$lib" "" "."
-	ladir="$func_dirname_result"
-
-	dlname=
-	dlopen=
-	dlpreopen=
-	libdir=
-	library_names=
-	old_library=
-	inherited_linker_flags=
-	# If the library was installed with an old release of libtool,
-	# it will not redefine variables installed, or shouldnotlink
-	installed=yes
-	shouldnotlink=no
-	avoidtemprpath=
-
-
-	# Read the .la file
-	func_source "$lib"
-
-	# Convert "-framework foo" to "foo.ltframework"
-	if test -n "$inherited_linker_flags"; then
-	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
-	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
-	    case " $new_inherited_linker_flags " in
-	      *" $tmp_inherited_linker_flag "*) ;;
-	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
-	    esac
-	  done
-	fi
-	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	if test "$linkmode,$pass" = "lib,link" ||
-	   test "$linkmode,$pass" = "prog,scan" ||
-	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
-	  test -n "$dlopen" && func_append dlfiles " $dlopen"
-	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
-	fi
-
-	if test "$pass" = conv; then
-	  # Only check for convenience libraries
-	  deplibs="$lib $deplibs"
-	  if test -z "$libdir"; then
-	    if test -z "$old_library"; then
-	      func_fatal_error "cannot find name of link library for \`$lib'"
-	    fi
-	    # It is a libtool convenience library, so add in its objects.
-	    func_append convenience " $ladir/$objdir/$old_library"
-	    func_append old_convenience " $ladir/$objdir/$old_library"
-	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
-	    func_fatal_error "\`$lib' is not a convenience library"
-	  fi
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    deplibs="$deplib $deplibs"
-	    if $opt_preserve_dup_deps ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
-	      esac
-	    fi
-	    func_append tmp_libs " $deplib"
-	  done
-	  continue
-	fi # $pass = conv
-
-
-	# Get the name of the library we link against.
-	linklib=
-	if test -n "$old_library" &&
-	   { test "$prefer_static_libs" = yes ||
-	     test "$prefer_static_libs,$installed" = "built,no"; }; then
-	  linklib=$old_library
-	else
-	  for l in $old_library $library_names; do
-	    linklib="$l"
-	  done
-	fi
-	if test -z "$linklib"; then
-	  func_fatal_error "cannot find name of link library for \`$lib'"
-	fi
-
-	# This library was specified with -dlopen.
-	if test "$pass" = dlopen; then
-	  if test -z "$libdir"; then
-	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
-	  fi
-	  if test -z "$dlname" ||
-	     test "$dlopen_support" != yes ||
-	     test "$build_libtool_libs" = no; then
-	    # If there is no dlname, no dlopen support or we're linking
-	    # statically, we need to preload.  We also need to preload any
-	    # dependent libraries so libltdl's deplib preloader doesn't
-	    # bomb out in the load deplibs phase.
-	    func_append dlprefiles " $lib $dependency_libs"
-	  else
-	    func_append newdlfiles " $lib"
-	  fi
-	  continue
-	fi # $pass = dlopen
-
-	# We need an absolute path.
-	case $ladir in
-	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
-	*)
-	  abs_ladir=`cd "$ladir" && pwd`
-	  if test -z "$abs_ladir"; then
-	    func_warning "cannot determine absolute directory name of \`$ladir'"
-	    func_warning "passing it literally to the linker, although it might fail"
-	    abs_ladir="$ladir"
-	  fi
-	  ;;
-	esac
-	func_basename "$lib"
-	laname="$func_basename_result"
-
-	# Find the relevant object directory and library name.
-	if test "X$installed" = Xyes; then
-	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    #func_warning "library \`$lib' was moved."
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    libdir="$abs_ladir"
-	  else
-	    dir="$lt_sysroot$libdir"
-	    absdir="$lt_sysroot$libdir"
-	  fi
-	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
-	else
-	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    # Remove this search path later
-	    func_append notinst_path " $abs_ladir"
-	  else
-	    dir="$ladir/$objdir"
-	    absdir="$abs_ladir/$objdir"
-	    # Remove this search path later
-	    func_append notinst_path " $abs_ladir"
-	  fi
-	fi # $installed = yes
-	func_stripname 'lib' '.la' "$laname"
-	name=$func_stripname_result
-
-	# This library was specified with -dlpreopen.
-	if test "$pass" = dlpreopen; then
-	  if test -z "$libdir" && test "$linkmode" = prog; then
-	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
-	  fi
-	  case "$host" in
-	    # special handling for platforms with PE-DLLs.
-	    *cygwin* | *mingw* | *cegcc* )
-	      # Linker will automatically link against shared library if both
-	      # static and shared are present.  Therefore, ensure we extract
-	      # symbols from the import library if a shared library is present
-	      # (otherwise, the dlopen module name will be incorrect).  We do
-	      # this by putting the import library name into $newdlprefiles.
-	      # We recover the dlopen module name by 'saving' the la file
-	      # name in a special purpose variable, and (later) extracting the
-	      # dlname from the la file.
-	      if test -n "$dlname"; then
-	        func_tr_sh "$dir/$linklib"
-	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
-	        func_append newdlprefiles " $dir/$linklib"
-	      else
-	        func_append newdlprefiles " $dir/$old_library"
-	        # Keep a list of preopened convenience libraries to check
-	        # that they are being used correctly in the link pass.
-	        test -z "$libdir" && \
-	          func_append dlpreconveniencelibs " $dir/$old_library"
-	      fi
-	    ;;
-	    * )
-	      # Prefer using a static library (so that no silly _DYNAMIC symbols
-	      # are required to link).
-	      if test -n "$old_library"; then
-	        func_append newdlprefiles " $dir/$old_library"
-	        # Keep a list of preopened convenience libraries to check
-	        # that they are being used correctly in the link pass.
-	        test -z "$libdir" && \
-	          func_append dlpreconveniencelibs " $dir/$old_library"
-	      # Otherwise, use the dlname, so that lt_dlopen finds it.
-	      elif test -n "$dlname"; then
-	        func_append newdlprefiles " $dir/$dlname"
-	      else
-	        func_append newdlprefiles " $dir/$linklib"
-	      fi
-	    ;;
-	  esac
-	fi # $pass = dlpreopen
-
-	if test -z "$libdir"; then
-	  # Link the convenience library
-	  if test "$linkmode" = lib; then
-	    deplibs="$dir/$old_library $deplibs"
-	  elif test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$dir/$old_library $compile_deplibs"
-	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
-	  else
-	    deplibs="$lib $deplibs" # used for prog,scan pass
-	  fi
-	  continue
-	fi
-
-
-	if test "$linkmode" = prog && test "$pass" != link; then
-	  func_append newlib_search_path " $ladir"
-	  deplibs="$lib $deplibs"
-
-	  linkalldeplibs=no
-	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
-	     test "$build_libtool_libs" = no; then
-	    linkalldeplibs=yes
-	  fi
-
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    case $deplib in
-	    -L*) func_stripname '-L' '' "$deplib"
-	         func_resolve_sysroot "$func_stripname_result"
-	         func_append newlib_search_path " $func_resolve_sysroot_result"
-		 ;;
-	    esac
-	    # Need to link against all dependency_libs?
-	    if test "$linkalldeplibs" = yes; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      # Need to hardcode shared library paths
-	      # or/and link against static libraries
-	      newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    if $opt_preserve_dup_deps ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
-	      esac
-	    fi
-	    func_append tmp_libs " $deplib"
-	  done # for deplib
-	  continue
-	fi # $linkmode = prog...
-
-	if test "$linkmode,$pass" = "prog,link"; then
-	  if test -n "$library_names" &&
-	     { { test "$prefer_static_libs" = no ||
-	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
-	       test -z "$old_library"; }; then
-	    # We need to hardcode the library path
-	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
-	      # Make sure the rpath contains only unique directories.
-	      case "$temp_rpath:" in
-	      *"$absdir:"*) ;;
-	      *) func_append temp_rpath "$absdir:" ;;
-	      esac
-	    fi
-
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) func_append compile_rpath " $absdir" ;;
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) func_append finalize_rpath " $libdir" ;;
-	      esac
-	      ;;
-	    esac
-	  fi # $linkmode,$pass = prog,link...
-
-	  if test "$alldeplibs" = yes &&
-	     { test "$deplibs_check_method" = pass_all ||
-	       { test "$build_libtool_libs" = yes &&
-		 test -n "$library_names"; }; }; then
-	    # We only need to search for static libraries
-	    continue
-	  fi
-	fi
-
-	link_static=no # Whether the deplib will be linked statically
-	use_static_libs=$prefer_static_libs
-	if test "$use_static_libs" = built && test "$installed" = yes; then
-	  use_static_libs=no
-	fi
-	if test -n "$library_names" &&
-	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
-	  case $host in
-	  *cygwin* | *mingw* | *cegcc*)
-	      # No point in relinking DLLs because paths are not encoded
-	      func_append notinst_deplibs " $lib"
-	      need_relink=no
-	    ;;
-	  *)
-	    if test "$installed" = no; then
-	      func_append notinst_deplibs " $lib"
-	      need_relink=yes
-	    fi
-	    ;;
-	  esac
-	  # This is a shared library
-
-	  # Warn about portability, can't link against -module's on some
-	  # systems (darwin).  Don't bleat about dlopened modules though!
-	  dlopenmodule=""
-	  for dlpremoduletest in $dlprefiles; do
-	    if test "X$dlpremoduletest" = "X$lib"; then
-	      dlopenmodule="$dlpremoduletest"
-	      break
-	    fi
-	  done
-	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
-	    echo
-	    if test "$linkmode" = prog; then
-	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
-	    else
-	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
-	    fi
-	    $ECHO "*** $linklib is not portable!"
-	  fi
-	  if test "$linkmode" = lib &&
-	     test "$hardcode_into_libs" = yes; then
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) func_append compile_rpath " $absdir" ;;
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) func_append finalize_rpath " $libdir" ;;
-	      esac
-	      ;;
-	    esac
-	  fi
-
-	  if test -n "$old_archive_from_expsyms_cmds"; then
-	    # figure out the soname
-	    set dummy $library_names
-	    shift
-	    realname="$1"
-	    shift
-	    libname=`eval "\\$ECHO \"$libname_spec\""`
-	    # use dlname if we got it. it's perfectly good, no?
-	    if test -n "$dlname"; then
-	      soname="$dlname"
-	    elif test -n "$soname_spec"; then
-	      # bleh windows
-	      case $host in
-	      *cygwin* | mingw* | *cegcc*)
-	        func_arith $current - $age
-		major=$func_arith_result
-		versuffix="-$major"
-		;;
-	      esac
-	      eval soname=\"$soname_spec\"
-	    else
-	      soname="$realname"
-	    fi
-
-	    # Make a new name for the extract_expsyms_cmds to use
-	    soroot="$soname"
-	    func_basename "$soroot"
-	    soname="$func_basename_result"
-	    func_stripname 'lib' '.dll' "$soname"
-	    newlib=libimp-$func_stripname_result.a
-
-	    # If the library has no export list, then create one now
-	    if test -f "$output_objdir/$soname-def"; then :
-	    else
-	      func_verbose "extracting exported symbol list from \`$soname'"
-	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
-	    fi
-
-	    # Create $newlib
-	    if test -f "$output_objdir/$newlib"; then :; else
-	      func_verbose "generating import library for \`$soname'"
-	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
-	    fi
-	    # make sure the library variables are pointing to the new library
-	    dir=$output_objdir
-	    linklib=$newlib
-	  fi # test -n "$old_archive_from_expsyms_cmds"
-
-	  if test "$linkmode" = prog || test "$opt_mode" != relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    lib_linked=yes
-	    case $hardcode_action in
-	    immediate | unsupported)
-	      if test "$hardcode_direct" = no; then
-		add="$dir/$linklib"
-		case $host in
-		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
-		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
-		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
-		    *-*-unixware7*) add_dir="-L$dir" ;;
-		  *-*-darwin* )
-		    # if the lib is a (non-dlopened) module then we can not
-		    # link against it, someone is ignoring the earlier warnings
-		    if /usr/bin/file -L $add 2> /dev/null |
-			 $GREP ": [^:]* bundle" >/dev/null ; then
-		      if test "X$dlopenmodule" != "X$lib"; then
-			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
-			if test -z "$old_library" ; then
-			  echo
-			  echo "*** And there doesn't seem to be a static archive available"
-			  echo "*** The link will probably fail, sorry"
-			else
-			  add="$dir/$old_library"
-			fi
-		      elif test -n "$old_library"; then
-			add="$dir/$old_library"
-		      fi
-		    fi
-		esac
-	      elif test "$hardcode_minus_L" = no; then
-		case $host in
-		*-*-sunos*) add_shlibpath="$dir" ;;
-		esac
-		add_dir="-L$dir"
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = no; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    relink)
-	      if test "$hardcode_direct" = yes &&
-	         test "$hardcode_direct_absolute" = no; then
-		add="$dir/$linklib"
-	      elif test "$hardcode_minus_L" = yes; then
-		add_dir="-L$absdir"
-		# Try looking first in the location we're being installed to.
-		if test -n "$inst_prefix_dir"; then
-		  case $libdir in
-		    [\\/]*)
-		      func_append add_dir " -L$inst_prefix_dir$libdir"
-		      ;;
-		  esac
-		fi
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = yes; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    *) lib_linked=no ;;
-	    esac
-
-	    if test "$lib_linked" != yes; then
-	      func_fatal_configuration "unsupported hardcode properties"
-	    fi
-
-	    if test -n "$add_shlibpath"; then
-	      case :$compile_shlibpath: in
-	      *":$add_shlibpath:"*) ;;
-	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
-	      esac
-	    fi
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
-	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	      if test "$hardcode_direct" != yes &&
-		 test "$hardcode_minus_L" != yes &&
-		 test "$hardcode_shlibpath_var" = yes; then
-		case :$finalize_shlibpath: in
-		*":$libdir:"*) ;;
-		*) func_append finalize_shlibpath "$libdir:" ;;
-		esac
-	      fi
-	    fi
-	  fi
-
-	  if test "$linkmode" = prog || test "$opt_mode" = relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes &&
-	       test "$hardcode_direct_absolute" = no; then
-	      add="$libdir/$linklib"
-	    elif test "$hardcode_minus_L" = yes; then
-	      add_dir="-L$libdir"
-	      add="-l$name"
-	    elif test "$hardcode_shlibpath_var" = yes; then
-	      case :$finalize_shlibpath: in
-	      *":$libdir:"*) ;;
-	      *) func_append finalize_shlibpath "$libdir:" ;;
-	      esac
-	      add="-l$name"
-	    elif test "$hardcode_automatic" = yes; then
-	      if test -n "$inst_prefix_dir" &&
-		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
-		add="$inst_prefix_dir$libdir/$linklib"
-	      else
-		add="$libdir/$linklib"
-	      fi
-	    else
-	      # We cannot seem to hardcode it, guess we'll fake it.
-	      add_dir="-L$libdir"
-	      # Try looking first in the location we're being installed to.
-	      if test -n "$inst_prefix_dir"; then
-		case $libdir in
-		  [\\/]*)
-		    func_append add_dir " -L$inst_prefix_dir$libdir"
-		    ;;
-		esac
-	      fi
-	      add="-l$name"
-	    fi
-
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
-	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	    fi
-	  fi
-	elif test "$linkmode" = prog; then
-	  # Here we assume that one of hardcode_direct or hardcode_minus_L
-	  # is not unsupported.  This is valid on all known static and
-	  # shared platforms.
-	  if test "$hardcode_direct" != unsupported; then
-	    test -n "$old_library" && linklib="$old_library"
-	    compile_deplibs="$dir/$linklib $compile_deplibs"
-	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
-	  else
-	    compile_deplibs="-l$name -L$dir $compile_deplibs"
-	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
-	  fi
-	elif test "$build_libtool_libs" = yes; then
-	  # Not a shared library
-	  if test "$deplibs_check_method" != pass_all; then
-	    # We're trying link a shared library against a static one
-	    # but the system doesn't support it.
-
-	    # Just print a warning and add the library to dependency_libs so
-	    # that the program can be linked against the static library.
-	    echo
-	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
-	    echo "*** I have the capability to make that library automatically link in when"
-	    echo "*** you link to this library.  But I can only do this if you have a"
-	    echo "*** shared version of the library, which you do not appear to have."
-	    if test "$module" = yes; then
-	      echo "*** But as you try to build a module library, libtool will still create "
-	      echo "*** a static module, that should work as long as the dlopening application"
-	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
-	      if test -z "$global_symbol_pipe"; then
-		echo
-		echo "*** However, this would only work if libtool was able to extract symbol"
-		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		echo "*** not find such a program.  So, this module is probably useless."
-		echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	      fi
-	      if test "$build_old_libs" = no; then
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  else
-	    deplibs="$dir/$old_library $deplibs"
-	    link_static=yes
-	  fi
-	fi # link shared/static library?
-
-	if test "$linkmode" = lib; then
-	  if test -n "$dependency_libs" &&
-	     { test "$hardcode_into_libs" != yes ||
-	       test "$build_old_libs" = yes ||
-	       test "$link_static" = yes; }; then
-	    # Extract -R from dependency_libs
-	    temp_deplibs=
-	    for libdir in $dependency_libs; do
-	      case $libdir in
-	      -R*) func_stripname '-R' '' "$libdir"
-	           temp_xrpath=$func_stripname_result
-		   case " $xrpath " in
-		   *" $temp_xrpath "*) ;;
-		   *) func_append xrpath " $temp_xrpath";;
-		   esac;;
-	      *) func_append temp_deplibs " $libdir";;
-	      esac
-	    done
-	    dependency_libs="$temp_deplibs"
-	  fi
-
-	  func_append newlib_search_path " $absdir"
-	  # Link against this library
-	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
-	  # ... and its dependency_libs
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    newdependency_libs="$deplib $newdependency_libs"
-	    case $deplib in
-              -L*) func_stripname '-L' '' "$deplib"
-                   func_resolve_sysroot "$func_stripname_result";;
-              *) func_resolve_sysroot "$deplib" ;;
-            esac
-	    if $opt_preserve_dup_deps ; then
-	      case "$tmp_libs " in
-	      *" $func_resolve_sysroot_result "*)
-                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
-	      esac
-	    fi
-	    func_append tmp_libs " $func_resolve_sysroot_result"
-	  done
-
-	  if test "$link_all_deplibs" != no; then
-	    # Add the search paths of all dependency libraries
-	    for deplib in $dependency_libs; do
-	      path=
-	      case $deplib in
-	      -L*) path="$deplib" ;;
-	      *.la)
-	        func_resolve_sysroot "$deplib"
-	        deplib=$func_resolve_sysroot_result
-	        func_dirname "$deplib" "" "."
-		dir=$func_dirname_result
-		# We need an absolute path.
-		case $dir in
-		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-		*)
-		  absdir=`cd "$dir" && pwd`
-		  if test -z "$absdir"; then
-		    func_warning "cannot determine absolute directory name of \`$dir'"
-		    absdir="$dir"
-		  fi
-		  ;;
-		esac
-		if $GREP "^installed=no" $deplib > /dev/null; then
-		case $host in
-		*-*-darwin*)
-		  depdepl=
-		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
-		  if test -n "$deplibrary_names" ; then
-		    for tmp in $deplibrary_names ; do
-		      depdepl=$tmp
-		    done
-		    if test -f "$absdir/$objdir/$depdepl" ; then
-		      depdepl="$absdir/$objdir/$depdepl"
-		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
-                      if test -z "$darwin_install_name"; then
-                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
-                      fi
-		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
-		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
-		      path=
-		    fi
-		  fi
-		  ;;
-		*)
-		  path="-L$absdir/$objdir"
-		  ;;
-		esac
-		else
-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		  test -z "$libdir" && \
-		    func_fatal_error "\`$deplib' is not a valid libtool archive"
-		  #test "$absdir" != "$libdir" && \
-		  #  func_warning "\`$deplib' seems to be moved"
-
-		  path="-L$absdir"
-		fi
-		;;
-	      esac
-	      case " $deplibs " in
-	      *" $path "*) ;;
-	      *) deplibs="$path $deplibs" ;;
-	      esac
-	    done
-	  fi # link_all_deplibs != no
-	fi # linkmode = lib
-      done # for deplib in $libs
-      if test "$pass" = link; then
-	if test "$linkmode" = "prog"; then
-	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
-	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
-	else
-	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	fi
-      fi
-      dependency_libs="$newdependency_libs"
-      if test "$pass" = dlpreopen; then
-	# Link the dlpreopened libraries before other libraries
-	for deplib in $save_deplibs; do
-	  deplibs="$deplib $deplibs"
-	done
-      fi
-      if test "$pass" != dlopen; then
-	if test "$pass" != conv; then
-	  # Make sure lib_search_path contains only unique directories.
-	  lib_search_path=
-	  for dir in $newlib_search_path; do
-	    case "$lib_search_path " in
-	    *" $dir "*) ;;
-	    *) func_append lib_search_path " $dir" ;;
-	    esac
-	  done
-	  newlib_search_path=
-	fi
-
-	if test "$linkmode,$pass" != "prog,link"; then
-	  vars="deplibs"
-	else
-	  vars="compile_deplibs finalize_deplibs"
-	fi
-	for var in $vars dependency_libs; do
-	  # Add libraries to $var in reverse order
-	  eval tmp_libs=\"\$$var\"
-	  new_libs=
-	  for deplib in $tmp_libs; do
-	    # FIXME: Pedantically, this is the right thing to do, so
-	    #        that some nasty dependency loop isn't accidentally
-	    #        broken:
-	    #new_libs="$deplib $new_libs"
-	    # Pragmatically, this seems to cause very few problems in
-	    # practice:
-	    case $deplib in
-	    -L*) new_libs="$deplib $new_libs" ;;
-	    -R*) ;;
-	    *)
-	      # And here is the reason: when a library appears more
-	      # than once as an explicit dependence of a library, or
-	      # is implicitly linked in more than once by the
-	      # compiler, it is considered special, and multiple
-	      # occurrences thereof are not removed.  Compare this
-	      # with having the same library being listed as a
-	      # dependency of multiple other libraries: in this case,
-	      # we know (pedantically, we assume) the library does not
-	      # need to be listed more than once, so we keep only the
-	      # last copy.  This is not always right, but it is rare
-	      # enough that we require users that really mean to play
-	      # such unportable linking tricks to link the library
-	      # using -Wl,-lname, so that libtool does not consider it
-	      # for duplicate removal.
-	      case " $specialdeplibs " in
-	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
-	      *)
-		case " $new_libs " in
-		*" $deplib "*) ;;
-		*) new_libs="$deplib $new_libs" ;;
-		esac
-		;;
-	      esac
-	      ;;
-	    esac
-	  done
-	  tmp_libs=
-	  for deplib in $new_libs; do
-	    case $deplib in
-	    -L*)
-	      case " $tmp_libs " in
-	      *" $deplib "*) ;;
-	      *) func_append tmp_libs " $deplib" ;;
-	      esac
-	      ;;
-	    *) func_append tmp_libs " $deplib" ;;
-	    esac
-	  done
-	  eval $var=\"$tmp_libs\"
-	done # for var
-      fi
-      # Last step: remove runtime libs from dependency_libs
-      # (they stay in deplibs)
-      tmp_libs=
-      for i in $dependency_libs ; do
-	case " $predeps $postdeps $compiler_lib_search_path " in
-	*" $i "*)
-	  i=""
-	  ;;
-	esac
-	if test -n "$i" ; then
-	  func_append tmp_libs " $i"
-	fi
-      done
-      dependency_libs=$tmp_libs
-    done # for pass
-    if test "$linkmode" = prog; then
-      dlfiles="$newdlfiles"
-    fi
-    if test "$linkmode" = prog || test "$linkmode" = lib; then
-      dlprefiles="$newdlprefiles"
-    fi
-
-    case $linkmode in
-    oldlib)
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	func_warning "\`-dlopen' is ignored for archives"
-      fi
-
-      case " $deplibs" in
-      *\ -l* | *\ -L*)
-	func_warning "\`-l' and \`-L' are ignored for archives" ;;
-      esac
-
-      test -n "$rpath" && \
-	func_warning "\`-rpath' is ignored for archives"
-
-      test -n "$xrpath" && \
-	func_warning "\`-R' is ignored for archives"
-
-      test -n "$vinfo" && \
-	func_warning "\`-version-info/-version-number' is ignored for archives"
-
-      test -n "$release" && \
-	func_warning "\`-release' is ignored for archives"
-
-      test -n "$export_symbols$export_symbols_regex" && \
-	func_warning "\`-export-symbols' is ignored for archives"
-
-      # Now set the variables for building old libraries.
-      build_libtool_libs=no
-      oldlibs="$output"
-      func_append objs "$old_deplibs"
-      ;;
-
-    lib)
-      # Make sure we only generate libraries of the form `libNAME.la'.
-      case $outputname in
-      lib*)
-	func_stripname 'lib' '.la' "$outputname"
-	name=$func_stripname_result
-	eval shared_ext=\"$shrext_cmds\"
-	eval libname=\"$libname_spec\"
-	;;
-      *)
-	test "$module" = no && \
-	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
-
-	if test "$need_lib_prefix" != no; then
-	  # Add the "lib" prefix for modules if required
-	  func_stripname '' '.la' "$outputname"
-	  name=$func_stripname_result
-	  eval shared_ext=\"$shrext_cmds\"
-	  eval libname=\"$libname_spec\"
-	else
-	  func_stripname '' '.la' "$outputname"
-	  libname=$func_stripname_result
-	fi
-	;;
-      esac
-
-      if test -n "$objs"; then
-	if test "$deplibs_check_method" != pass_all; then
-	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
-	else
-	  echo
-	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
-	  $ECHO "*** objects $objs is not portable!"
-	  func_append libobjs " $objs"
-	fi
-      fi
-
-      test "$dlself" != no && \
-	func_warning "\`-dlopen self' is ignored for libtool libraries"
-
-      set dummy $rpath
-      shift
-      test "$#" -gt 1 && \
-	func_warning "ignoring multiple \`-rpath's for a libtool library"
-
-      install_libdir="$1"
-
-      oldlibs=
-      if test -z "$rpath"; then
-	if test "$build_libtool_libs" = yes; then
-	  # Building a libtool convenience library.
-	  # Some compilers have problems with a `.al' extension so
-	  # convenience libraries should have the same extension an
-	  # archive normally would.
-	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
-	  build_libtool_libs=convenience
-	  build_old_libs=yes
-	fi
-
-	test -n "$vinfo" && \
-	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
-
-	test -n "$release" && \
-	  func_warning "\`-release' is ignored for convenience libraries"
-      else
-
-	# Parse the version information argument.
-	save_ifs="$IFS"; IFS=':'
-	set dummy $vinfo 0 0 0
-	shift
-	IFS="$save_ifs"
-
-	test -n "$7" && \
-	  func_fatal_help "too many parameters to \`-version-info'"
-
-	# convert absolute version numbers to libtool ages
-	# this retains compatibility with .la files and attempts
-	# to make the code below a bit more comprehensible
-
-	case $vinfo_number in
-	yes)
-	  number_major="$1"
-	  number_minor="$2"
-	  number_revision="$3"
-	  #
-	  # There are really only two kinds -- those that
-	  # use the current revision as the major version
-	  # and those that subtract age and use age as
-	  # a minor version.  But, then there is irix
-	  # which has an extra 1 added just for fun
-	  #
-	  case $version_type in
-	  # correct linux to gnu/linux during the next big refactor
-	  darwin|linux|osf|windows|none)
-	    func_arith $number_major + $number_minor
-	    current=$func_arith_result
-	    age="$number_minor"
-	    revision="$number_revision"
-	    ;;
-	  freebsd-aout|freebsd-elf|qnx|sunos)
-	    current="$number_major"
-	    revision="$number_minor"
-	    age="0"
-	    ;;
-	  irix|nonstopux)
-	    func_arith $number_major + $number_minor
-	    current=$func_arith_result
-	    age="$number_minor"
-	    revision="$number_minor"
-	    lt_irix_increment=no
-	    ;;
-	  esac
-	  ;;
-	no)
-	  current="$1"
-	  revision="$2"
-	  age="$3"
-	  ;;
-	esac
-
-	# Check that each of the things are valid numbers.
-	case $current in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  func_error "CURRENT \`$current' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
-	  ;;
-	esac
-
-	case $revision in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  func_error "REVISION \`$revision' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
-	  ;;
-	esac
-
-	case $age in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  func_error "AGE \`$age' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
-	  ;;
-	esac
-
-	if test "$age" -gt "$current"; then
-	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
-	  func_fatal_error "\`$vinfo' is not valid version information"
-	fi
-
-	# Calculate the version variables.
-	major=
-	versuffix=
-	verstring=
-	case $version_type in
-	none) ;;
-
-	darwin)
-	  # Like Linux, but with the current version available in
-	  # verstring for coding it into the library header
-	  func_arith $current - $age
-	  major=.$func_arith_result
-	  versuffix="$major.$age.$revision"
-	  # Darwin ld doesn't like 0 for these options...
-	  func_arith $current + 1
-	  minor_current=$func_arith_result
-	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
-	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
-	  ;;
-
-	freebsd-aout)
-	  major=".$current"
-	  versuffix=".$current.$revision";
-	  ;;
-
-	freebsd-elf)
-	  major=".$current"
-	  versuffix=".$current"
-	  ;;
-
-	irix | nonstopux)
-	  if test "X$lt_irix_increment" = "Xno"; then
-	    func_arith $current - $age
-	  else
-	    func_arith $current - $age + 1
-	  fi
-	  major=$func_arith_result
-
-	  case $version_type in
-	    nonstopux) verstring_prefix=nonstopux ;;
-	    *)         verstring_prefix=sgi ;;
-	  esac
-	  verstring="$verstring_prefix$major.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$revision
-	  while test "$loop" -ne 0; do
-	    func_arith $revision - $loop
-	    iface=$func_arith_result
-	    func_arith $loop - 1
-	    loop=$func_arith_result
-	    verstring="$verstring_prefix$major.$iface:$verstring"
-	  done
-
-	  # Before this point, $major must not contain `.'.
-	  major=.$major
-	  versuffix="$major.$revision"
-	  ;;
-
-	linux) # correct to gnu/linux during the next big refactor
-	  func_arith $current - $age
-	  major=.$func_arith_result
-	  versuffix="$major.$age.$revision"
-	  ;;
-
-	osf)
-	  func_arith $current - $age
-	  major=.$func_arith_result
-	  versuffix=".$current.$age.$revision"
-	  verstring="$current.$age.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$age
-	  while test "$loop" -ne 0; do
-	    func_arith $current - $loop
-	    iface=$func_arith_result
-	    func_arith $loop - 1
-	    loop=$func_arith_result
-	    verstring="$verstring:${iface}.0"
-	  done
-
-	  # Make executables depend on our current version.
-	  func_append verstring ":${current}.0"
-	  ;;
-
-	qnx)
-	  major=".$current"
-	  versuffix=".$current"
-	  ;;
-
-	sunos)
-	  major=".$current"
-	  versuffix=".$current.$revision"
-	  ;;
-
-	windows)
-	  # Use '-' rather than '.', since we only want one
-	  # extension on DOS 8.3 filesystems.
-	  func_arith $current - $age
-	  major=$func_arith_result
-	  versuffix="-$major"
-	  ;;
-
-	*)
-	  func_fatal_configuration "unknown library version type \`$version_type'"
-	  ;;
-	esac
-
-	# Clear the version info if we defaulted, and they specified a release.
-	if test -z "$vinfo" && test -n "$release"; then
-	  major=
-	  case $version_type in
-	  darwin)
-	    # we can't check for "0.0" in archive_cmds due to quoting
-	    # problems, so we reset it completely
-	    verstring=
-	    ;;
-	  *)
-	    verstring="0.0"
-	    ;;
-	  esac
-	  if test "$need_version" = no; then
-	    versuffix=
-	  else
-	    versuffix=".0.0"
-	  fi
-	fi
-
-	# Remove version info from name if versioning should be avoided
-	if test "$avoid_version" = yes && test "$need_version" = no; then
-	  major=
-	  versuffix=
-	  verstring=""
-	fi
-
-	# Check to see if the archive will have undefined symbols.
-	if test "$allow_undefined" = yes; then
-	  if test "$allow_undefined_flag" = unsupported; then
-	    func_warning "undefined symbols not allowed in $host shared libraries"
-	    build_libtool_libs=no
-	    build_old_libs=yes
-	  fi
-	else
-	  # Don't allow undefined symbols.
-	  allow_undefined_flag="$no_undefined_flag"
-	fi
-
-      fi
-
-      func_generate_dlsyms "$libname" "$libname" "yes"
-      func_append libobjs " $symfileobj"
-      test "X$libobjs" = "X " && libobjs=
-
-      if test "$opt_mode" != relink; then
-	# Remove our outputs, but don't remove object files since they
-	# may have been created when compiling PIC objects.
-	removelist=
-	tempremovelist=`$ECHO "$output_objdir/*"`
-	for p in $tempremovelist; do
-	  case $p in
-	    *.$objext | *.gcno)
-	       ;;
-	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
-	       if test "X$precious_files_regex" != "X"; then
-		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
-		 then
-		   continue
-		 fi
-	       fi
-	       func_append removelist " $p"
-	       ;;
-	    *) ;;
-	  esac
-	done
-	test -n "$removelist" && \
-	  func_show_eval "${RM}r \$removelist"
-      fi
-
-      # Now set the variables for building old libraries.
-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-	func_append oldlibs " $output_objdir/$libname.$libext"
-
-	# Transform .lo files to .o files.
-	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
-      fi
-
-      # Eliminate all temporary directories.
-      #for path in $notinst_path; do
-      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
-      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
-      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
-      #done
-
-      if test -n "$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	temp_xrpath=
-	for libdir in $xrpath; do
-	  func_replace_sysroot "$libdir"
-	  func_append temp_xrpath " -R$func_replace_sysroot_result"
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) func_append finalize_rpath " $libdir" ;;
-	  esac
-	done
-	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
-	  dependency_libs="$temp_xrpath $dependency_libs"
-	fi
-      fi
-
-      # Make sure dlfiles contains only unique files that won't be dlpreopened
-      old_dlfiles="$dlfiles"
-      dlfiles=
-      for lib in $old_dlfiles; do
-	case " $dlprefiles $dlfiles " in
-	*" $lib "*) ;;
-	*) func_append dlfiles " $lib" ;;
-	esac
-      done
-
-      # Make sure dlprefiles contains only unique files
-      old_dlprefiles="$dlprefiles"
-      dlprefiles=
-      for lib in $old_dlprefiles; do
-	case "$dlprefiles " in
-	*" $lib "*) ;;
-	*) func_append dlprefiles " $lib" ;;
-	esac
-      done
-
-      if test "$build_libtool_libs" = yes; then
-	if test -n "$rpath"; then
-	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
-	    # these systems don't actually have a c library (as such)!
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C library is in the System framework
-	    func_append deplibs " System.ltframework"
-	    ;;
-	  *-*-netbsd*)
-	    # Don't link with libc until the a.out ld.so is fixed.
-	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	    # Do not include libc due to us having libc/libc_r.
-	    ;;
-	  *-*-sco3.2v5* | *-*-sco5v6*)
-	    # Causes problems with __ctype
-	    ;;
-	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-	    # Compiler inserts libc in the correct place for threads to work
-	    ;;
-	  *)
-	    # Add libc to deplibs on all other systems if necessary.
-	    if test "$build_libtool_need_lc" = "yes"; then
-	      func_append deplibs " -lc"
-	    fi
-	    ;;
-	  esac
-	fi
-
-	# Transform deplibs into only deplibs that can be linked in shared.
-	name_save=$name
-	libname_save=$libname
-	release_save=$release
-	versuffix_save=$versuffix
-	major_save=$major
-	# I'm not sure if I'm treating the release correctly.  I think
-	# release should show up in the -l (ie -lgmp5) so we don't want to
-	# add it in twice.  Is that correct?
-	release=""
-	versuffix=""
-	major=""
-	newdeplibs=
-	droppeddeps=no
-	case $deplibs_check_method in
-	pass_all)
-	  # Don't check for shared/static.  Everything works.
-	  # This might be a little naive.  We might want to check
-	  # whether the library exists or not.  But this is on
-	  # osf3 & osf4 and I'm not really sure... Just
-	  # implementing what was already the behavior.
-	  newdeplibs=$deplibs
-	  ;;
-	test_compile)
-	  # This code stresses the "libraries are programs" paradigm to its
-	  # limits. Maybe even breaks it.  We compile a program, linking it
-	  # against the deplibs as a proxy for the library.  Then we can check
-	  # whether they linked in statically or dynamically with ldd.
-	  $opt_dry_run || $RM conftest.c
-	  cat > conftest.c <<EOF
-	  int main() { return 0; }
-EOF
-	  $opt_dry_run || $RM conftest
-	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
-	    ldd_output=`ldd conftest`
-	    for i in $deplibs; do
-	      case $i in
-	      -l*)
-		func_stripname -l '' "$i"
-		name=$func_stripname_result
-		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		  case " $predeps $postdeps " in
-		  *" $i "*)
-		    func_append newdeplibs " $i"
-		    i=""
-		    ;;
-		  esac
-		fi
-		if test -n "$i" ; then
-		  libname=`eval "\\$ECHO \"$libname_spec\""`
-		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
-		  set dummy $deplib_matches; shift
-		  deplib_match=$1
-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		    func_append newdeplibs " $i"
-		  else
-		    droppeddeps=yes
-		    echo
-		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		    echo "*** I have the capability to make that library automatically link in when"
-		    echo "*** you link to this library.  But I can only do this if you have a"
-		    echo "*** shared version of the library, which I believe you do not have"
-		    echo "*** because a test_compile did reveal that the linker did not use it for"
-		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
-		  fi
-		fi
-		;;
-	      *)
-		func_append newdeplibs " $i"
-		;;
-	      esac
-	    done
-	  else
-	    # Error occurred in the first compile.  Let's try to salvage
-	    # the situation: Compile a separate program for each library.
-	    for i in $deplibs; do
-	      case $i in
-	      -l*)
-		func_stripname -l '' "$i"
-		name=$func_stripname_result
-		$opt_dry_run || $RM conftest
-		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
-		  ldd_output=`ldd conftest`
-		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		    case " $predeps $postdeps " in
-		    *" $i "*)
-		      func_append newdeplibs " $i"
-		      i=""
-		      ;;
-		    esac
-		  fi
-		  if test -n "$i" ; then
-		    libname=`eval "\\$ECHO \"$libname_spec\""`
-		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
-		    set dummy $deplib_matches; shift
-		    deplib_match=$1
-		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		      func_append newdeplibs " $i"
-		    else
-		      droppeddeps=yes
-		      echo
-		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		      echo "*** I have the capability to make that library automatically link in when"
-		      echo "*** you link to this library.  But I can only do this if you have a"
-		      echo "*** shared version of the library, which you do not appear to have"
-		      echo "*** because a test_compile did reveal that the linker did not use this one"
-		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
-		    fi
-		  fi
-		else
-		  droppeddeps=yes
-		  echo
-		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
-		  echo "*** make it link in!  You will probably need to install it or some"
-		  echo "*** library that it depends on before this library will be fully"
-		  echo "*** functional.  Installing it before continuing would be even better."
-		fi
-		;;
-	      *)
-		func_append newdeplibs " $i"
-		;;
-	      esac
-	    done
-	  fi
-	  ;;
-	file_magic*)
-	  set dummy $deplibs_check_method; shift
-	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    case $a_deplib in
-	    -l*)
-	      func_stripname -l '' "$a_deplib"
-	      name=$func_stripname_result
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		case " $predeps $postdeps " in
-		*" $a_deplib "*)
-		  func_append newdeplibs " $a_deplib"
-		  a_deplib=""
-		  ;;
-		esac
-	      fi
-	      if test -n "$a_deplib" ; then
-		libname=`eval "\\$ECHO \"$libname_spec\""`
-		if test -n "$file_magic_glob"; then
-		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
-		else
-		  libnameglob=$libname
-		fi
-		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  if test "$want_nocaseglob" = yes; then
-		    shopt -s nocaseglob
-		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
-		    $nocaseglob
-		  else
-		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
-		  fi
-		  for potent_lib in $potential_libs; do
-		      # Follow soft links.
-		      if ls -lLd "$potent_lib" 2>/dev/null |
-			 $GREP " -> " >/dev/null; then
-			continue
-		      fi
-		      # The statement above tries to avoid entering an
-		      # endless loop below, in case of cyclic links.
-		      # We might still enter an endless loop, since a link
-		      # loop can be closed while we follow links,
-		      # but so what?
-		      potlib="$potent_lib"
-		      while test -h "$potlib" 2>/dev/null; do
-			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
-			case $potliblink in
-			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
-			esac
-		      done
-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
-			 $SED -e 10q |
-			 $EGREP "$file_magic_regex" > /dev/null; then
-			func_append newdeplibs " $a_deplib"
-			a_deplib=""
-			break 2
-		      fi
-		  done
-		done
-	      fi
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		echo
-		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
-		else
-		  $ECHO "*** with $libname and none of the candidates passed a file format test"
-		  $ECHO "*** using a file magic. Last file checked: $potlib"
-		fi
-	      fi
-	      ;;
-	    *)
-	      # Add a -L argument.
-	      func_append newdeplibs " $a_deplib"
-	      ;;
-	    esac
-	  done # Gone through all deplibs.
-	  ;;
-	match_pattern*)
-	  set dummy $deplibs_check_method; shift
-	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    case $a_deplib in
-	    -l*)
-	      func_stripname -l '' "$a_deplib"
-	      name=$func_stripname_result
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		case " $predeps $postdeps " in
-		*" $a_deplib "*)
-		  func_append newdeplibs " $a_deplib"
-		  a_deplib=""
-		  ;;
-		esac
-	      fi
-	      if test -n "$a_deplib" ; then
-		libname=`eval "\\$ECHO \"$libname_spec\""`
-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		  for potent_lib in $potential_libs; do
-		    potlib="$potent_lib" # see symlink-check above in file_magic test
-		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
-		       $EGREP "$match_pattern_regex" > /dev/null; then
-		      func_append newdeplibs " $a_deplib"
-		      a_deplib=""
-		      break 2
-		    fi
-		  done
-		done
-	      fi
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		echo
-		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
-		else
-		  $ECHO "*** with $libname and none of the candidates passed a file format test"
-		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
-		fi
-	      fi
-	      ;;
-	    *)
-	      # Add a -L argument.
-	      func_append newdeplibs " $a_deplib"
-	      ;;
-	    esac
-	  done # Gone through all deplibs.
-	  ;;
-	none | unknown | *)
-	  newdeplibs=""
-	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
-	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-	    for i in $predeps $postdeps ; do
-	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
-	    done
-	  fi
-	  case $tmp_deplibs in
-	  *[!\	\ ]*)
-	    echo
-	    if test "X$deplibs_check_method" = "Xnone"; then
-	      echo "*** Warning: inter-library dependencies are not supported in this platform."
-	    else
-	      echo "*** Warning: inter-library dependencies are not known to be supported."
-	    fi
-	    echo "*** All declared inter-library dependencies are being dropped."
-	    droppeddeps=yes
-	    ;;
-	  esac
-	  ;;
-	esac
-	versuffix=$versuffix_save
-	major=$major_save
-	release=$release_save
-	libname=$libname_save
-	name=$name_save
-
-	case $host in
-	*-*-rhapsody* | *-*-darwin1.[012])
-	  # On Rhapsody replace the C library with the System framework
-	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
-	  ;;
-	esac
-
-	if test "$droppeddeps" = yes; then
-	  if test "$module" = yes; then
-	    echo
-	    echo "*** Warning: libtool could not satisfy all declared inter-library"
-	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
-	    echo "*** a static module, that should work as long as the dlopening"
-	    echo "*** application is linked with the -dlopen flag."
-	    if test -z "$global_symbol_pipe"; then
-	      echo
-	      echo "*** However, this would only work if libtool was able to extract symbol"
-	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      echo "*** not find such a program.  So, this module is probably useless."
-	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	    fi
-	    if test "$build_old_libs" = no; then
-	      oldlibs="$output_objdir/$libname.$libext"
-	      build_libtool_libs=module
-	      build_old_libs=yes
-	    else
-	      build_libtool_libs=no
-	    fi
-	  else
-	    echo "*** The inter-library dependencies that have been dropped here will be"
-	    echo "*** automatically added whenever a program is linked with this library"
-	    echo "*** or is declared to -dlopen it."
-
-	    if test "$allow_undefined" = no; then
-	      echo
-	      echo "*** Since this library must not contain undefined symbols,"
-	      echo "*** because either the platform does not support them or"
-	      echo "*** it was explicitly requested with -no-undefined,"
-	      echo "*** libtool will only create a static version of it."
-	      if test "$build_old_libs" = no; then
-		oldlibs="$output_objdir/$libname.$libext"
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  fi
-	fi
-	# Done checking deplibs!
-	deplibs=$newdeplibs
-      fi
-      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
-      case $host in
-	*-*-darwin*)
-	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  ;;
-      esac
-
-      # move library search paths that coincide with paths to not yet
-      # installed libraries to the beginning of the library search list
-      new_libs=
-      for path in $notinst_path; do
-	case " $new_libs " in
-	*" -L$path/$objdir "*) ;;
-	*)
-	  case " $deplibs " in
-	  *" -L$path/$objdir "*)
-	    func_append new_libs " -L$path/$objdir" ;;
-	  esac
-	  ;;
-	esac
-      done
-      for deplib in $deplibs; do
-	case $deplib in
-	-L*)
-	  case " $new_libs " in
-	  *" $deplib "*) ;;
-	  *) func_append new_libs " $deplib" ;;
-	  esac
-	  ;;
-	*) func_append new_libs " $deplib" ;;
-	esac
-      done
-      deplibs="$new_libs"
-
-      # All the library-specific variables (install_libdir is set above).
-      library_names=
-      old_library=
-      dlname=
-
-      # Test again, we may have decided not to build it any more
-      if test "$build_libtool_libs" = yes; then
-	# Remove ${wl} instances when linking with ld.
-	# FIXME: should test the right _cmds variable.
-	case $archive_cmds in
-	  *\$LD\ *) wl= ;;
-        esac
-	if test "$hardcode_into_libs" = yes; then
-	  # Hardcode the library paths
-	  hardcode_libdirs=
-	  dep_rpath=
-	  rpath="$finalize_rpath"
-	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
-	  for libdir in $rpath; do
-	    if test -n "$hardcode_libdir_flag_spec"; then
-	      if test -n "$hardcode_libdir_separator"; then
-		func_replace_sysroot "$libdir"
-		libdir=$func_replace_sysroot_result
-		if test -z "$hardcode_libdirs"; then
-		  hardcode_libdirs="$libdir"
-		else
-		  # Just accumulate the unique libdirs.
-		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		    ;;
-		  *)
-		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
-		    ;;
-		  esac
-		fi
-	      else
-		eval flag=\"$hardcode_libdir_flag_spec\"
-		func_append dep_rpath " $flag"
-	      fi
-	    elif test -n "$runpath_var"; then
-	      case "$perm_rpath " in
-	      *" $libdir "*) ;;
-	      *) func_append perm_rpath " $libdir" ;;
-	      esac
-	    fi
-	  done
-	  # Substitute the hardcoded libdirs into the rpath.
-	  if test -n "$hardcode_libdir_separator" &&
-	     test -n "$hardcode_libdirs"; then
-	    libdir="$hardcode_libdirs"
-	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
-	  fi
-	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
-	    # We should set the runpath_var.
-	    rpath=
-	    for dir in $perm_rpath; do
-	      func_append rpath "$dir:"
-	    done
-	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
-	  fi
-	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
-	fi
-
-	shlibpath="$finalize_shlibpath"
-	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
-	if test -n "$shlibpath"; then
-	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
-	fi
-
-	# Get the real and link names of the library.
-	eval shared_ext=\"$shrext_cmds\"
-	eval library_names=\"$library_names_spec\"
-	set dummy $library_names
-	shift
-	realname="$1"
-	shift
-
-	if test -n "$soname_spec"; then
-	  eval soname=\"$soname_spec\"
-	else
-	  soname="$realname"
-	fi
-	if test -z "$dlname"; then
-	  dlname=$soname
-	fi
-
-	lib="$output_objdir/$realname"
-	linknames=
-	for link
-	do
-	  func_append linknames " $link"
-	done
-
-	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
-	test "X$libobjs" = "X " && libobjs=
-
-	delfiles=
-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
-	  export_symbols="$output_objdir/$libname.uexp"
-	  func_append delfiles " $export_symbols"
-	fi
-
-	orig_export_symbols=
-	case $host_os in
-	cygwin* | mingw* | cegcc*)
-	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
-	    # exporting using user supplied symfile
-	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
-	      # and it's NOT already a .def file. Must figure out
-	      # which of the given symbols are data symbols and tag
-	      # them as such. So, trigger use of export_symbols_cmds.
-	      # export_symbols gets reassigned inside the "prepare
-	      # the list of exported symbols" if statement, so the
-	      # include_expsyms logic still works.
-	      orig_export_symbols="$export_symbols"
-	      export_symbols=
-	      always_export_symbols=yes
-	    fi
-	  fi
-	  ;;
-	esac
-
-	# Prepare the list of exported symbols
-	if test -z "$export_symbols"; then
-	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    func_verbose "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $opt_dry_run || $RM $export_symbols
-	    cmds=$export_symbols_cmds
-	    save_ifs="$IFS"; IFS='~'
-	    for cmd1 in $cmds; do
-	      IFS="$save_ifs"
-	      # Take the normal branch if the nm_file_list_spec branch
-	      # doesn't work or if tool conversion is not needed.
-	      case $nm_file_list_spec~$to_tool_file_cmd in
-		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
-		  try_normal_branch=yes
-		  eval cmd=\"$cmd1\"
-		  func_len " $cmd"
-		  len=$func_len_result
-		  ;;
-		*)
-		  try_normal_branch=no
-		  ;;
-	      esac
-	      if test "$try_normal_branch" = yes \
-		 && { test "$len" -lt "$max_cmd_len" \
-		      || test "$max_cmd_len" -le -1; }
-	      then
-		func_show_eval "$cmd" 'exit $?'
-		skipped_export=false
-	      elif test -n "$nm_file_list_spec"; then
-		func_basename "$output"
-		output_la=$func_basename_result
-		save_libobjs=$libobjs
-		save_output=$output
-		output=${output_objdir}/${output_la}.nm
-		func_to_tool_file "$output"
-		libobjs=$nm_file_list_spec$func_to_tool_file_result
-		func_append delfiles " $output"
-		func_verbose "creating $NM input file list: $output"
-		for obj in $save_libobjs; do
-		  func_to_tool_file "$obj"
-		  $ECHO "$func_to_tool_file_result"
-		done > "$output"
-		eval cmd=\"$cmd1\"
-		func_show_eval "$cmd" 'exit $?'
-		output=$save_output
-		libobjs=$save_libobjs
-		skipped_export=false
-	      else
-		# The command line is too long to execute in one step.
-		func_verbose "using reloadable object file for export list..."
-		skipped_export=:
-		# Break out early, otherwise skipped_export may be
-		# set to false by a later but shorter cmd.
-		break
-	      fi
-	    done
-	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
-	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
-	    fi
-	  fi
-	fi
-
-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  tmp_export_symbols="$export_symbols"
-	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
-	fi
-
-	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
-	  # The given exports_symbols file has to be filtered, so filter it.
-	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
-	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
-	  # 's' commands which not all seds can handle. GNU sed should be fine
-	  # though. Also, the filter scales superlinearly with the number of
-	  # global variables. join(1) would be nice here, but unfortunately
-	  # isn't a blessed tool.
-	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
-	  export_symbols=$output_objdir/$libname.def
-	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
-	fi
-
-	tmp_deplibs=
-	for test_deplib in $deplibs; do
-	  case " $convenience " in
-	  *" $test_deplib "*) ;;
-	  *)
-	    func_append tmp_deplibs " $test_deplib"
-	    ;;
-	  esac
-	done
-	deplibs="$tmp_deplibs"
-
-	if test -n "$convenience"; then
-	  if test -n "$whole_archive_flag_spec" &&
-	    test "$compiler_needs_object" = yes &&
-	    test -z "$libobjs"; then
-	    # extract the archives, so we have objects to list.
-	    # TODO: could optimize this to just extract one archive.
-	    whole_archive_flag_spec=
-	  fi
-	  if test -n "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	    test "X$libobjs" = "X " && libobjs=
-	  else
-	    gentop="$output_objdir/${outputname}x"
-	    func_append generated " $gentop"
-
-	    func_extract_archives $gentop $convenience
-	    func_append libobjs " $func_extract_archives_result"
-	    test "X$libobjs" = "X " && libobjs=
-	  fi
-	fi
-
-	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
-	  eval flag=\"$thread_safe_flag_spec\"
-	  func_append linker_flags " $flag"
-	fi
-
-	# Make a backup of the uninstalled library when relinking
-	if test "$opt_mode" = relink; then
-	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
-	fi
-
-	# Do each of the archive commands.
-	if test "$module" = yes && test -n "$module_cmds" ; then
-	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-	    eval test_cmds=\"$module_expsym_cmds\"
-	    cmds=$module_expsym_cmds
-	  else
-	    eval test_cmds=\"$module_cmds\"
-	    cmds=$module_cmds
-	  fi
-	else
-	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	    eval test_cmds=\"$archive_expsym_cmds\"
-	    cmds=$archive_expsym_cmds
-	  else
-	    eval test_cmds=\"$archive_cmds\"
-	    cmds=$archive_cmds
-	  fi
-	fi
-
-	if test "X$skipped_export" != "X:" &&
-	   func_len " $test_cmds" &&
-	   len=$func_len_result &&
-	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  :
-	else
-	  # The command line is too long to link in one step, link piecewise
-	  # or, if using GNU ld and skipped_export is not :, use a linker
-	  # script.
-
-	  # Save the value of $output and $libobjs because we want to
-	  # use them later.  If we have whole_archive_flag_spec, we
-	  # want to use save_libobjs as it was before
-	  # whole_archive_flag_spec was expanded, because we can't
-	  # assume the linker understands whole_archive_flag_spec.
-	  # This may have to be revisited, in case too many
-	  # convenience libraries get linked in and end up exceeding
-	  # the spec.
-	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	  fi
-	  save_output=$output
-	  func_basename "$output"
-	  output_la=$func_basename_result
-
-	  # Clear the reloadable object creation command queue and
-	  # initialize k to one.
-	  test_cmds=
-	  concat_cmds=
-	  objlist=
-	  last_robj=
-	  k=1
-
-	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
-	    output=${output_objdir}/${output_la}.lnkscript
-	    func_verbose "creating GNU ld script: $output"
-	    echo 'INPUT (' > $output
-	    for obj in $save_libobjs
-	    do
-	      func_to_tool_file "$obj"
-	      $ECHO "$func_to_tool_file_result" >> $output
-	    done
-	    echo ')' >> $output
-	    func_append delfiles " $output"
-	    func_to_tool_file "$output"
-	    output=$func_to_tool_file_result
-	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
-	    output=${output_objdir}/${output_la}.lnk
-	    func_verbose "creating linker input file list: $output"
-	    : > $output
-	    set x $save_libobjs
-	    shift
-	    firstobj=
-	    if test "$compiler_needs_object" = yes; then
-	      firstobj="$1 "
-	      shift
-	    fi
-	    for obj
-	    do
-	      func_to_tool_file "$obj"
-	      $ECHO "$func_to_tool_file_result" >> $output
-	    done
-	    func_append delfiles " $output"
-	    func_to_tool_file "$output"
-	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
-	  else
-	    if test -n "$save_libobjs"; then
-	      func_verbose "creating reloadable object files..."
-	      output=$output_objdir/$output_la-${k}.$objext
-	      eval test_cmds=\"$reload_cmds\"
-	      func_len " $test_cmds"
-	      len0=$func_len_result
-	      len=$len0
-
-	      # Loop over the list of objects to be linked.
-	      for obj in $save_libobjs
-	      do
-		func_len " $obj"
-		func_arith $len + $func_len_result
-		len=$func_arith_result
-		if test "X$objlist" = X ||
-		   test "$len" -lt "$max_cmd_len"; then
-		  func_append objlist " $obj"
-		else
-		  # The command $test_cmds is almost too long, add a
-		  # command to the queue.
-		  if test "$k" -eq 1 ; then
-		    # The first file doesn't have a previous command to add.
-		    reload_objs=$objlist
-		    eval concat_cmds=\"$reload_cmds\"
-		  else
-		    # All subsequent reloadable object files will link in
-		    # the last one created.
-		    reload_objs="$objlist $last_robj"
-		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
-		  fi
-		  last_robj=$output_objdir/$output_la-${k}.$objext
-		  func_arith $k + 1
-		  k=$func_arith_result
-		  output=$output_objdir/$output_la-${k}.$objext
-		  objlist=" $obj"
-		  func_len " $last_robj"
-		  func_arith $len0 + $func_len_result
-		  len=$func_arith_result
-		fi
-	      done
-	      # Handle the remaining objects by creating one last
-	      # reloadable object file.  All subsequent reloadable object
-	      # files will link in the last one created.
-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      reload_objs="$objlist $last_robj"
-	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
-	      if test -n "$last_robj"; then
-	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
-	      fi
-	      func_append delfiles " $output"
-
-	    else
-	      output=
-	    fi
-
-	    if ${skipped_export-false}; then
-	      func_verbose "generating symbol list for \`$libname.la'"
-	      export_symbols="$output_objdir/$libname.exp"
-	      $opt_dry_run || $RM $export_symbols
-	      libobjs=$output
-	      # Append the command to create the export file.
-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
-	      if test -n "$last_robj"; then
-		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
-	      fi
-	    fi
-
-	    test -n "$save_libobjs" &&
-	      func_verbose "creating a temporary reloadable object file: $output"
-
-	    # Loop through the commands generated above and execute them.
-	    save_ifs="$IFS"; IFS='~'
-	    for cmd in $concat_cmds; do
-	      IFS="$save_ifs"
-	      $opt_silent || {
-		  func_quote_for_expand "$cmd"
-		  eval "func_echo $func_quote_for_expand_result"
-	      }
-	      $opt_dry_run || eval "$cmd" || {
-		lt_exit=$?
-
-		# Restore the uninstalled library and exit
-		if test "$opt_mode" = relink; then
-		  ( cd "$output_objdir" && \
-		    $RM "${realname}T" && \
-		    $MV "${realname}U" "$realname" )
-		fi
-
-		exit $lt_exit
-	      }
-	    done
-	    IFS="$save_ifs"
-
-	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
-	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
-	    fi
-	  fi
-
-          if ${skipped_export-false}; then
-	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	      tmp_export_symbols="$export_symbols"
-	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
-	    fi
-
-	    if test -n "$orig_export_symbols"; then
-	      # The given exports_symbols file has to be filtered, so filter it.
-	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
-	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
-	      # 's' commands which not all seds can handle. GNU sed should be fine
-	      # though. Also, the filter scales superlinearly with the number of
-	      # global variables. join(1) would be nice here, but unfortunately
-	      # isn't a blessed tool.
-	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
-	      export_symbols=$output_objdir/$libname.def
-	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
-	    fi
-	  fi
-
-	  libobjs=$output
-	  # Restore the value of output.
-	  output=$save_output
-
-	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	    test "X$libobjs" = "X " && libobjs=
-	  fi
-	  # Expand the library linking commands again to reset the
-	  # value of $libobjs for piecewise linking.
-
-	  # Do each of the archive commands.
-	  if test "$module" = yes && test -n "$module_cmds" ; then
-	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-	      cmds=$module_expsym_cmds
-	    else
-	      cmds=$module_cmds
-	    fi
-	  else
-	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	      cmds=$archive_expsym_cmds
-	    else
-	      cmds=$archive_cmds
-	    fi
-	  fi
-	fi
-
-	if test -n "$delfiles"; then
-	  # Append the command to remove temporary files to $cmds.
-	  eval cmds=\"\$cmds~\$RM $delfiles\"
-	fi
-
-	# Add any objects from preloaded convenience libraries
-	if test -n "$dlprefiles"; then
-	  gentop="$output_objdir/${outputname}x"
-	  func_append generated " $gentop"
-
-	  func_extract_archives $gentop $dlprefiles
-	  func_append libobjs " $func_extract_archives_result"
-	  test "X$libobjs" = "X " && libobjs=
-	fi
-
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  eval cmd=\"$cmd\"
-	  $opt_silent || {
-	    func_quote_for_expand "$cmd"
-	    eval "func_echo $func_quote_for_expand_result"
-	  }
-	  $opt_dry_run || eval "$cmd" || {
-	    lt_exit=$?
-
-	    # Restore the uninstalled library and exit
-	    if test "$opt_mode" = relink; then
-	      ( cd "$output_objdir" && \
-	        $RM "${realname}T" && \
-		$MV "${realname}U" "$realname" )
-	    fi
-
-	    exit $lt_exit
-	  }
-	done
-	IFS="$save_ifs"
-
-	# Restore the uninstalled library and exit
-	if test "$opt_mode" = relink; then
-	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
-
-	  if test -n "$convenience"; then
-	    if test -z "$whole_archive_flag_spec"; then
-	      func_show_eval '${RM}r "$gentop"'
-	    fi
-	  fi
-
-	  exit $EXIT_SUCCESS
-	fi
-
-	# Create links to the real library.
-	for linkname in $linknames; do
-	  if test "$realname" != "$linkname"; then
-	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
-	  fi
-	done
-
-	# If -module or -export-dynamic was specified, set the dlname.
-	if test "$module" = yes || test "$export_dynamic" = yes; then
-	  # On all known operating systems, these are identical.
-	  dlname="$soname"
-	fi
-      fi
-      ;;
-
-    obj)
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	func_warning "\`-dlopen' is ignored for objects"
-      fi
-
-      case " $deplibs" in
-      *\ -l* | *\ -L*)
-	func_warning "\`-l' and \`-L' are ignored for objects" ;;
-      esac
-
-      test -n "$rpath" && \
-	func_warning "\`-rpath' is ignored for objects"
-
-      test -n "$xrpath" && \
-	func_warning "\`-R' is ignored for objects"
-
-      test -n "$vinfo" && \
-	func_warning "\`-version-info' is ignored for objects"
-
-      test -n "$release" && \
-	func_warning "\`-release' is ignored for objects"
-
-      case $output in
-      *.lo)
-	test -n "$objs$old_deplibs" && \
-	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
-
-	libobj=$output
-	func_lo2o "$libobj"
-	obj=$func_lo2o_result
-	;;
-      *)
-	libobj=
-	obj="$output"
-	;;
-      esac
-
-      # Delete the old objects.
-      $opt_dry_run || $RM $obj $libobj
-
-      # Objects from convenience libraries.  This assumes
-      # single-version convenience libraries.  Whenever we create
-      # different ones for PIC/non-PIC, this we'll have to duplicate
-      # the extraction.
-      reload_conv_objs=
-      gentop=
-      # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec and hope we can get by with
-      # turning comma into space..
-      wl=
-
-      if test -n "$convenience"; then
-	if test -n "$whole_archive_flag_spec"; then
-	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
-	else
-	  gentop="$output_objdir/${obj}x"
-	  func_append generated " $gentop"
-
-	  func_extract_archives $gentop $convenience
-	  reload_conv_objs="$reload_objs $func_extract_archives_result"
-	fi
-      fi
-
-      # If we're not building shared, we need to use non_pic_objs
-      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
-
-      # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
-      output="$obj"
-      func_execute_cmds "$reload_cmds" 'exit $?'
-
-      # Exit if we aren't doing a library object file.
-      if test -z "$libobj"; then
-	if test -n "$gentop"; then
-	  func_show_eval '${RM}r "$gentop"'
-	fi
-
-	exit $EXIT_SUCCESS
-      fi
-
-      if test "$build_libtool_libs" != yes; then
-	if test -n "$gentop"; then
-	  func_show_eval '${RM}r "$gentop"'
-	fi
-
-	# Create an invalid libtool object if no PIC, so that we don't
-	# accidentally link it into a program.
-	# $show "echo timestamp > $libobj"
-	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
-	exit $EXIT_SUCCESS
-      fi
-
-      if test -n "$pic_flag" || test "$pic_mode" != default; then
-	# Only do commands if we really have different PIC objects.
-	reload_objs="$libobjs $reload_conv_objs"
-	output="$libobj"
-	func_execute_cmds "$reload_cmds" 'exit $?'
-      fi
-
-      if test -n "$gentop"; then
-	func_show_eval '${RM}r "$gentop"'
-      fi
-
-      exit $EXIT_SUCCESS
-      ;;
-
-    prog)
-      case $host in
-	*cygwin*) func_stripname '' '.exe' "$output"
-	          output=$func_stripname_result.exe;;
-      esac
-      test -n "$vinfo" && \
-	func_warning "\`-version-info' is ignored for programs"
-
-      test -n "$release" && \
-	func_warning "\`-release' is ignored for programs"
-
-      test "$preload" = yes \
-        && test "$dlopen_support" = unknown \
-	&& test "$dlopen_self" = unknown \
-	&& test "$dlopen_self_static" = unknown && \
-	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
-
-      case $host in
-      *-*-rhapsody* | *-*-darwin1.[012])
-	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
-	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
-	;;
-      esac
-
-      case $host in
-      *-*-darwin*)
-	# Don't allow lazy linking, it breaks C++ global constructors
-	# But is supposedly fixed on 10.4 or later (yay!).
-	if test "$tagname" = CXX ; then
-	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
-	    10.[0123])
-	      func_append compile_command " ${wl}-bind_at_load"
-	      func_append finalize_command " ${wl}-bind_at_load"
-	    ;;
-	  esac
-	fi
-	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
-	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	;;
-      esac
-
-
-      # move library search paths that coincide with paths to not yet
-      # installed libraries to the beginning of the library search list
-      new_libs=
-      for path in $notinst_path; do
-	case " $new_libs " in
-	*" -L$path/$objdir "*) ;;
-	*)
-	  case " $compile_deplibs " in
-	  *" -L$path/$objdir "*)
-	    func_append new_libs " -L$path/$objdir" ;;
-	  esac
-	  ;;
-	esac
-      done
-      for deplib in $compile_deplibs; do
-	case $deplib in
-	-L*)
-	  case " $new_libs " in
-	  *" $deplib "*) ;;
-	  *) func_append new_libs " $deplib" ;;
-	  esac
-	  ;;
-	*) func_append new_libs " $deplib" ;;
-	esac
-      done
-      compile_deplibs="$new_libs"
-
-
-      func_append compile_command " $compile_deplibs"
-      func_append finalize_command " $finalize_deplibs"
-
-      if test -n "$rpath$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	for libdir in $rpath $xrpath; do
-	  # This is the magic to use -rpath.
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) func_append finalize_rpath " $libdir" ;;
-	  esac
-	done
-      fi
-
-      # Now hardcode the library paths
-      rpath=
-      hardcode_libdirs=
-      for libdir in $compile_rpath $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    func_append rpath " $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) func_append perm_rpath " $libdir" ;;
-	  esac
-	fi
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
-	  case :$dllsearchpath: in
-	  *":$libdir:"*) ;;
-	  ::) dllsearchpath=$libdir;;
-	  *) func_append dllsearchpath ":$libdir";;
-	  esac
-	  case :$dllsearchpath: in
-	  *":$testbindir:"*) ;;
-	  ::) dllsearchpath=$testbindir;;
-	  *) func_append dllsearchpath ":$testbindir";;
-	  esac
-	  ;;
-	esac
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      compile_rpath="$rpath"
-
-      rpath=
-      hardcode_libdirs=
-      for libdir in $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    func_append rpath " $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$finalize_perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) func_append finalize_perm_rpath " $libdir" ;;
-	  esac
-	fi
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      finalize_rpath="$rpath"
-
-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
-	# Transform all the library objects into standard objects.
-	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
-	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
-      fi
-
-      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
-
-      # template prelinking step
-      if test -n "$prelink_cmds"; then
-	func_execute_cmds "$prelink_cmds" 'exit $?'
-      fi
-
-      wrappers_required=yes
-      case $host in
-      *cegcc* | *mingw32ce*)
-        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
-        wrappers_required=no
-        ;;
-      *cygwin* | *mingw* )
-        if test "$build_libtool_libs" != yes; then
-          wrappers_required=no
-        fi
-        ;;
-      *)
-        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
-          wrappers_required=no
-        fi
-        ;;
-      esac
-      if test "$wrappers_required" = no; then
-	# Replace the output file specification.
-	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
-	link_command="$compile_command$compile_rpath"
-
-	# We have no uninstalled library dependencies, so finalize right now.
-	exit_status=0
-	func_show_eval "$link_command" 'exit_status=$?'
-
-	if test -n "$postlink_cmds"; then
-	  func_to_tool_file "$output"
-	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
-	  func_execute_cmds "$postlink_cmds" 'exit $?'
-	fi
-
-	# Delete the generated files.
-	if test -f "$output_objdir/${outputname}S.${objext}"; then
-	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
-	fi
-
-	exit $exit_status
-      fi
-
-      if test -n "$compile_shlibpath$finalize_shlibpath"; then
-	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
-      fi
-      if test -n "$finalize_shlibpath"; then
-	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
-      fi
-
-      compile_var=
-      finalize_var=
-      if test -n "$runpath_var"; then
-	if test -n "$perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $perm_rpath; do
-	    func_append rpath "$dir:"
-	  done
-	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-	if test -n "$finalize_perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $finalize_perm_rpath; do
-	    func_append rpath "$dir:"
-	  done
-	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-      fi
-
-      if test "$no_install" = yes; then
-	# We don't need to create a wrapper script.
-	link_command="$compile_var$compile_command$compile_rpath"
-	# Replace the output file specification.
-	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
-	# Delete the old output file.
-	$opt_dry_run || $RM $output
-	# Link the executable and exit
-	func_show_eval "$link_command" 'exit $?'
-
-	if test -n "$postlink_cmds"; then
-	  func_to_tool_file "$output"
-	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
-	  func_execute_cmds "$postlink_cmds" 'exit $?'
-	fi
-
-	exit $EXIT_SUCCESS
-      fi
-
-      if test "$hardcode_action" = relink; then
-	# Fast installation is not supported
-	link_command="$compile_var$compile_command$compile_rpath"
-	relink_command="$finalize_var$finalize_command$finalize_rpath"
-
-	func_warning "this platform does not like uninstalled shared libraries"
-	func_warning "\`$output' will be relinked during installation"
-      else
-	if test "$fast_install" != no; then
-	  link_command="$finalize_var$compile_command$finalize_rpath"
-	  if test "$fast_install" = yes; then
-	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
-	  else
-	    # fast_install is set to needless
-	    relink_command=
-	  fi
-	else
-	  link_command="$compile_var$compile_command$compile_rpath"
-	  relink_command="$finalize_var$finalize_command$finalize_rpath"
-	fi
-      fi
-
-      # Replace the output file specification.
-      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
-      # Delete the old output files.
-      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
-      func_show_eval "$link_command" 'exit $?'
-
-      if test -n "$postlink_cmds"; then
-	func_to_tool_file "$output_objdir/$outputname"
-	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
-	func_execute_cmds "$postlink_cmds" 'exit $?'
-      fi
-
-      # Now create the wrapper script.
-      func_verbose "creating $output"
-
-      # Quote the relink command for shipping.
-      if test -n "$relink_command"; then
-	# Preserve any variables that may affect compiler behavior
-	for var in $variables_saved_for_relink; do
-	  if eval test -z \"\${$var+set}\"; then
-	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
-	  elif eval var_value=\$$var; test -z "$var_value"; then
-	    relink_command="$var=; export $var; $relink_command"
-	  else
-	    func_quote_for_eval "$var_value"
-	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
-	  fi
-	done
-	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
-      fi
-
-      # Only actually do things if not in dry run mode.
-      $opt_dry_run || {
-	# win32 will think the script is a binary if it has
-	# a .exe suffix, so we strip it off here.
-	case $output in
-	  *.exe) func_stripname '' '.exe' "$output"
-	         output=$func_stripname_result ;;
-	esac
-	# test for cygwin because mv fails w/o .exe extensions
-	case $host in
-	  *cygwin*)
-	    exeext=.exe
-	    func_stripname '' '.exe' "$outputname"
-	    outputname=$func_stripname_result ;;
-	  *) exeext= ;;
-	esac
-	case $host in
-	  *cygwin* | *mingw* )
-	    func_dirname_and_basename "$output" "" "."
-	    output_name=$func_basename_result
-	    output_path=$func_dirname_result
-	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
-	    cwrapper="$output_path/$output_name.exe"
-	    $RM $cwrappersource $cwrapper
-	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
-	    func_emit_cwrapperexe_src > $cwrappersource
-
-	    # The wrapper executable is built using the $host compiler,
-	    # because it contains $host paths and files. If cross-
-	    # compiling, it, like the target executable, must be
-	    # executed on the $host or under an emulation environment.
-	    $opt_dry_run || {
-	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
-	      $STRIP $cwrapper
-	    }
-
-	    # Now, create the wrapper script for func_source use:
-	    func_ltwrapper_scriptname $cwrapper
-	    $RM $func_ltwrapper_scriptname_result
-	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
-	    $opt_dry_run || {
-	      # note: this script will not be executed, so do not chmod.
-	      if test "x$build" = "x$host" ; then
-		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
-	      else
-		func_emit_wrapper no > $func_ltwrapper_scriptname_result
-	      fi
-	    }
-	  ;;
-	  * )
-	    $RM $output
-	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
-
-	    func_emit_wrapper no > $output
-	    chmod +x $output
-	  ;;
-	esac
-      }
-      exit $EXIT_SUCCESS
-      ;;
-    esac
-
-    # See if we need to build an old-fashioned archive.
-    for oldlib in $oldlibs; do
-
-      if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save $symfileobj"
-	addlibs="$convenience"
-	build_libtool_libs=no
-      else
-	if test "$build_libtool_libs" = module; then
-	  oldobjs="$libobjs_save"
-	  build_libtool_libs=no
-	else
-	  oldobjs="$old_deplibs $non_pic_objects"
-	  if test "$preload" = yes && test -f "$symfileobj"; then
-	    func_append oldobjs " $symfileobj"
-	  fi
-	fi
-	addlibs="$old_convenience"
-      fi
-
-      if test -n "$addlibs"; then
-	gentop="$output_objdir/${outputname}x"
-	func_append generated " $gentop"
-
-	func_extract_archives $gentop $addlibs
-	func_append oldobjs " $func_extract_archives_result"
-      fi
-
-      # Do each command in the archive commands.
-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-	cmds=$old_archive_from_new_cmds
-      else
-
-	# Add any objects from preloaded convenience libraries
-	if test -n "$dlprefiles"; then
-	  gentop="$output_objdir/${outputname}x"
-	  func_append generated " $gentop"
-
-	  func_extract_archives $gentop $dlprefiles
-	  func_append oldobjs " $func_extract_archives_result"
-	fi
-
-	# POSIX demands no paths to be encoded in archives.  We have
-	# to avoid creating archives with duplicate basenames if we
-	# might have to extract them afterwards, e.g., when creating a
-	# static archive out of a convenience library, or when linking
-	# the entirety of a libtool archive into another (currently
-	# not supported by libtool).
-	if (for obj in $oldobjs
-	    do
-	      func_basename "$obj"
-	      $ECHO "$func_basename_result"
-	    done | sort | sort -uc >/dev/null 2>&1); then
-	  :
-	else
-	  echo "copying selected object files to avoid basename conflicts..."
-	  gentop="$output_objdir/${outputname}x"
-	  func_append generated " $gentop"
-	  func_mkdir_p "$gentop"
-	  save_oldobjs=$oldobjs
-	  oldobjs=
-	  counter=1
-	  for obj in $save_oldobjs
-	  do
-	    func_basename "$obj"
-	    objbase="$func_basename_result"
-	    case " $oldobjs " in
-	    " ") oldobjs=$obj ;;
-	    *[\ /]"$objbase "*)
-	      while :; do
-		# Make sure we don't pick an alternate name that also
-		# overlaps.
-		newobj=lt$counter-$objbase
-		func_arith $counter + 1
-		counter=$func_arith_result
-		case " $oldobjs " in
-		*[\ /]"$newobj "*) ;;
-		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
-		esac
-	      done
-	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-	      func_append oldobjs " $gentop/$newobj"
-	      ;;
-	    *) func_append oldobjs " $obj" ;;
-	    esac
-	  done
-	fi
-	func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
-	tool_oldlib=$func_to_tool_file_result
-	eval cmds=\"$old_archive_cmds\"
-
-	func_len " $cmds"
-	len=$func_len_result
-	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  cmds=$old_archive_cmds
-	elif test -n "$archiver_list_spec"; then
-	  func_verbose "using command file archive linking..."
-	  for obj in $oldobjs
-	  do
-	    func_to_tool_file "$obj"
-	    $ECHO "$func_to_tool_file_result"
-	  done > $output_objdir/$libname.libcmd
-	  func_to_tool_file "$output_objdir/$libname.libcmd"
-	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
-	  cmds=$old_archive_cmds
-	else
-	  # the command line is too long to link in one step, link in parts
-	  func_verbose "using piecewise archive linking..."
-	  save_RANLIB=$RANLIB
-	  RANLIB=:
-	  objlist=
-	  concat_cmds=
-	  save_oldobjs=$oldobjs
-	  oldobjs=
-	  # Is there a better way of finding the last object in the list?
-	  for obj in $save_oldobjs
-	  do
-	    last_oldobj=$obj
-	  done
-	  eval test_cmds=\"$old_archive_cmds\"
-	  func_len " $test_cmds"
-	  len0=$func_len_result
-	  len=$len0
-	  for obj in $save_oldobjs
-	  do
-	    func_len " $obj"
-	    func_arith $len + $func_len_result
-	    len=$func_arith_result
-	    func_append objlist " $obj"
-	    if test "$len" -lt "$max_cmd_len"; then
-	      :
-	    else
-	      # the above command should be used before it gets too long
-	      oldobjs=$objlist
-	      if test "$obj" = "$last_oldobj" ; then
-		RANLIB=$save_RANLIB
-	      fi
-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
-	      objlist=
-	      len=$len0
-	    fi
-	  done
-	  RANLIB=$save_RANLIB
-	  oldobjs=$objlist
-	  if test "X$oldobjs" = "X" ; then
-	    eval cmds=\"\$concat_cmds\"
-	  else
-	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
-	  fi
-	fi
-      fi
-      func_execute_cmds "$cmds" 'exit $?'
-    done
-
-    test -n "$generated" && \
-      func_show_eval "${RM}r$generated"
-
-    # Now create the libtool archive.
-    case $output in
-    *.la)
-      old_library=
-      test "$build_old_libs" = yes && old_library="$libname.$libext"
-      func_verbose "creating $output"
-
-      # Preserve any variables that may affect compiler behavior
-      for var in $variables_saved_for_relink; do
-	if eval test -z \"\${$var+set}\"; then
-	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
-	elif eval var_value=\$$var; test -z "$var_value"; then
-	  relink_command="$var=; export $var; $relink_command"
-	else
-	  func_quote_for_eval "$var_value"
-	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
-	fi
-      done
-      # Quote the link command for shipping.
-      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
-      if test "$hardcode_automatic" = yes ; then
-	relink_command=
-      fi
-
-      # Only create the output if not a dry run.
-      $opt_dry_run || {
-	for installed in no yes; do
-	  if test "$installed" = yes; then
-	    if test -z "$install_libdir"; then
-	      break
-	    fi
-	    output="$output_objdir/$outputname"i
-	    # Replace all uninstalled libtool libraries with the installed ones
-	    newdependency_libs=
-	    for deplib in $dependency_libs; do
-	      case $deplib in
-	      *.la)
-		func_basename "$deplib"
-		name="$func_basename_result"
-		func_resolve_sysroot "$deplib"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
-		test -z "$libdir" && \
-		  func_fatal_error "\`$deplib' is not a valid libtool archive"
-		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
-		;;
-	      -L*)
-		func_stripname -L '' "$deplib"
-		func_replace_sysroot "$func_stripname_result"
-		func_append newdependency_libs " -L$func_replace_sysroot_result"
-		;;
-	      -R*)
-		func_stripname -R '' "$deplib"
-		func_replace_sysroot "$func_stripname_result"
-		func_append newdependency_libs " -R$func_replace_sysroot_result"
-		;;
-	      *) func_append newdependency_libs " $deplib" ;;
-	      esac
-	    done
-	    dependency_libs="$newdependency_libs"
-	    newdlfiles=
-
-	    for lib in $dlfiles; do
-	      case $lib in
-	      *.la)
-	        func_basename "$lib"
-		name="$func_basename_result"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-		test -z "$libdir" && \
-		  func_fatal_error "\`$lib' is not a valid libtool archive"
-		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
-		;;
-	      *) func_append newdlfiles " $lib" ;;
-	      esac
-	    done
-	    dlfiles="$newdlfiles"
-	    newdlprefiles=
-	    for lib in $dlprefiles; do
-	      case $lib in
-	      *.la)
-		# Only pass preopened files to the pseudo-archive (for
-		# eventual linking with the app. that links it) if we
-		# didn't already link the preopened objects directly into
-		# the library:
-		func_basename "$lib"
-		name="$func_basename_result"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-		test -z "$libdir" && \
-		  func_fatal_error "\`$lib' is not a valid libtool archive"
-		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
-		;;
-	      esac
-	    done
-	    dlprefiles="$newdlprefiles"
-	  else
-	    newdlfiles=
-	    for lib in $dlfiles; do
-	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-		*) abs=`pwd`"/$lib" ;;
-	      esac
-	      func_append newdlfiles " $abs"
-	    done
-	    dlfiles="$newdlfiles"
-	    newdlprefiles=
-	    for lib in $dlprefiles; do
-	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-		*) abs=`pwd`"/$lib" ;;
-	      esac
-	      func_append newdlprefiles " $abs"
-	    done
-	    dlprefiles="$newdlprefiles"
-	  fi
-	  $RM $output
-	  # place dlname in correct position for cygwin
-	  # In fact, it would be nice if we could use this code for all target
-	  # systems that can't hard-code library paths into their executables
-	  # and that have no shared library path variable independent of PATH,
-	  # but it turns out we can't easily determine that from inspecting
-	  # libtool variables, so we have to hard-code the OSs to which it
-	  # applies here; at the moment, that means platforms that use the PE
-	  # object format with DLL files.  See the long comment at the top of
-	  # tests/bindir.at for full details.
-	  tdlname=$dlname
-	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
-	      # If a -bindir argument was supplied, place the dll there.
-	      if test "x$bindir" != x ;
-	      then
-		func_relative_path "$install_libdir" "$bindir"
-		tdlname=$func_relative_path_result$dlname
-	      else
-		# Otherwise fall back on heuristic.
-		tdlname=../bin/$dlname
-	      fi
-	      ;;
-	  esac
-	  $ECHO > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Linker flags that can not go in dependency_libs.
-inherited_linker_flags='$new_inherited_linker_flags'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Names of additional weak libraries provided by this library
-weak_library_names='$weak_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=$module
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
-	  if test "$installed" = no && test "$need_relink" = yes; then
-	    $ECHO >> $output "\
-relink_command=\"$relink_command\""
-	  fi
-	done
-      }
-
-      # Do a symbolic link so that the libtool archive can be found in
-      # LD_LIBRARY_PATH before the program is installed.
-      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
-      ;;
-    esac
-    exit $EXIT_SUCCESS
-}
-
-{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
-    func_mode_link ${1+"$@"}
-
-
-# func_mode_uninstall arg...
-func_mode_uninstall ()
-{
-    $opt_debug
-    RM="$nonopt"
-    files=
-    rmforce=
-    exit_status=0
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    for arg
-    do
-      case $arg in
-      -f) func_append RM " $arg"; rmforce=yes ;;
-      -*) func_append RM " $arg" ;;
-      *) func_append files " $arg" ;;
-      esac
-    done
-
-    test -z "$RM" && \
-      func_fatal_help "you must specify an RM program"
-
-    rmdirs=
-
-    for file in $files; do
-      func_dirname "$file" "" "."
-      dir="$func_dirname_result"
-      if test "X$dir" = X.; then
-	odir="$objdir"
-      else
-	odir="$dir/$objdir"
-      fi
-      func_basename "$file"
-      name="$func_basename_result"
-      test "$opt_mode" = uninstall && odir="$dir"
-
-      # Remember odir for removal later, being careful to avoid duplicates
-      if test "$opt_mode" = clean; then
-	case " $rmdirs " in
-	  *" $odir "*) ;;
-	  *) func_append rmdirs " $odir" ;;
-	esac
-      fi
-
-      # Don't error if the file doesn't exist and rm -f was used.
-      if { test -L "$file"; } >/dev/null 2>&1 ||
-	 { test -h "$file"; } >/dev/null 2>&1 ||
-	 test -f "$file"; then
-	:
-      elif test -d "$file"; then
-	exit_status=1
-	continue
-      elif test "$rmforce" = yes; then
-	continue
-      fi
-
-      rmfiles="$file"
-
-      case $name in
-      *.la)
-	# Possibly a libtool archive, so verify it.
-	if func_lalib_p "$file"; then
-	  func_source $dir/$name
-
-	  # Delete the libtool libraries and symlinks.
-	  for n in $library_names; do
-	    func_append rmfiles " $odir/$n"
-	  done
-	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
-
-	  case "$opt_mode" in
-	  clean)
-	    case " $library_names " in
-	    *" $dlname "*) ;;
-	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
-	    esac
-	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
-	    ;;
-	  uninstall)
-	    if test -n "$library_names"; then
-	      # Do each command in the postuninstall commands.
-	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
-	    fi
-
-	    if test -n "$old_library"; then
-	      # Do each command in the old_postuninstall commands.
-	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
-	    fi
-	    # FIXME: should reinstall the best remaining shared library.
-	    ;;
-	  esac
-	fi
-	;;
-
-      *.lo)
-	# Possibly a libtool object, so verify it.
-	if func_lalib_p "$file"; then
-
-	  # Read the .lo file
-	  func_source $dir/$name
-
-	  # Add PIC object to the list of files to remove.
-	  if test -n "$pic_object" &&
-	     test "$pic_object" != none; then
-	    func_append rmfiles " $dir/$pic_object"
-	  fi
-
-	  # Add non-PIC object to the list of files to remove.
-	  if test -n "$non_pic_object" &&
-	     test "$non_pic_object" != none; then
-	    func_append rmfiles " $dir/$non_pic_object"
-	  fi
-	fi
-	;;
-
-      *)
-	if test "$opt_mode" = clean ; then
-	  noexename=$name
-	  case $file in
-	  *.exe)
-	    func_stripname '' '.exe' "$file"
-	    file=$func_stripname_result
-	    func_stripname '' '.exe' "$name"
-	    noexename=$func_stripname_result
-	    # $file with .exe has already been added to rmfiles,
-	    # add $file without .exe
-	    func_append rmfiles " $file"
-	    ;;
-	  esac
-	  # Do a test to see if this is a libtool program.
-	  if func_ltwrapper_p "$file"; then
-	    if func_ltwrapper_executable_p "$file"; then
-	      func_ltwrapper_scriptname "$file"
-	      relink_command=
-	      func_source $func_ltwrapper_scriptname_result
-	      func_append rmfiles " $func_ltwrapper_scriptname_result"
-	    else
-	      relink_command=
-	      func_source $dir/$noexename
-	    fi
-
-	    # note $name still contains .exe if it was in $file originally
-	    # as does the version of $file that was added into $rmfiles
-	    func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
-	    if test "$fast_install" = yes && test -n "$relink_command"; then
-	      func_append rmfiles " $odir/lt-$name"
-	    fi
-	    if test "X$noexename" != "X$name" ; then
-	      func_append rmfiles " $odir/lt-${noexename}.c"
-	    fi
-	  fi
-	fi
-	;;
-      esac
-      func_show_eval "$RM $rmfiles" 'exit_status=1'
-    done
-
-    # Try to remove the ${objdir}s in the directories where we deleted files
-    for dir in $rmdirs; do
-      if test -d "$dir"; then
-	func_show_eval "rmdir $dir >/dev/null 2>&1"
-      fi
-    done
-
-    exit $exit_status
-}
-
-{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
-    func_mode_uninstall ${1+"$@"}
-
-test -z "$opt_mode" && {
-  help="$generic_help"
-  func_fatal_help "you must specify a MODE"
-}
-
-test -z "$exec_cmd" && \
-  func_fatal_help "invalid operation mode \`$opt_mode'"
-
-if test -n "$exec_cmd"; then
-  eval exec "$exec_cmd"
-  exit $EXIT_FAILURE
-fi
-
-exit $exit_status
-
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries.  Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them.  This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration.  But we'll never go from static-only to shared-only.
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-build_libtool_libs=no
-build_old_libs=yes
-# ### END LIBTOOL TAG CONFIG: disable-shared
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-# ### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
-# vi:sw=2
-
diff --git a/components/external/SQLite-3.8.1/autoconf/missing b/components/external/SQLite-3.8.1/autoconf/missing
deleted file mode 100644
index 86a8fc31e3..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/missing
+++ /dev/null
@@ -1,331 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2012-01-06.13; # UTC
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <[email protected]>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
-
-Send bug reports to <[email protected]>."
-    exit $?
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    exit $?
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# normalize program name to check for.
-program=`echo "$1" | sed '
-  s/^gnu-//; t
-  s/^gnu//; t
-  s/^g//; t'`
-
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).  This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
-  lex*|yacc*)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te*)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison*|yacc*)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG=\${$#}
-	case $LASTARG in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f y.tab.h; then
-	echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex*|flex*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if test $# -ne 1; then
-        eval LASTARG=\${$#}
-	case $LASTARG in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f lex.yy.c; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit $?
-    fi
-    ;;
-
-  makeinfo*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-	/^@setfilename/{
-	  s/.* \([^ ]*\) *$/\1/
-	  p
-	  q
-	}' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/components/external/SQLite-3.8.1/autoconf/tea/Makefile.in b/components/external/SQLite-3.8.1/autoconf/tea/Makefile.in
deleted file mode 100644
index 08b1a44182..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/tea/Makefile.in
+++ /dev/null
@@ -1,439 +0,0 @@
-# Makefile.in --
-#
-#	This file is a Makefile for Sample TEA Extension.  If it has the name
-#	"Makefile.in" then it is a template for a Makefile;  to generate the
-#	actual Makefile, run "./configure", which is a configuration script
-#	generated by the "autoconf" program (constructs like "@foo@" will get
-#	replaced in the actual Makefile.
-#
-# Copyright (c) 1999 Scriptics Corporation.
-# Copyright (c) 2002-2005 ActiveState Corporation.
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-#
-# RCS: @(#) $Id: Makefile.in,v 1.59 2005/07/26 19:17:02 mdejong Exp $
-
-#========================================================================
-# Add additional lines to handle any additional AC_SUBST cases that
-# have been added in a customized configure script.
-#========================================================================
-
-#SAMPLE_NEW_VAR	= @SAMPLE_NEW_VAR@
-
-#========================================================================
-# Nothing of the variables below this line should need to be changed.
-# Please check the TARGETS section below to make sure the make targets
-# are correct.
-#========================================================================
-
-#========================================================================
-# The names of the source files is defined in the configure script.
-# The object files are used for linking into the final library.
-# This will be used when a dist target is added to the Makefile.
-# It is not important to specify the directory, as long as it is the
-# $(srcdir) or in the generic, win or unix subdirectory.
-#========================================================================
-
-PKG_SOURCES	= @PKG_SOURCES@
-PKG_OBJECTS	= @PKG_OBJECTS@
-
-PKG_STUB_SOURCES = @PKG_STUB_SOURCES@
-PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@
-
-#========================================================================
-# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with
-# this package that need to be installed, if any.
-#========================================================================
-
-PKG_TCL_SOURCES = @PKG_TCL_SOURCES@
-
-#========================================================================
-# This is a list of public header files to be installed, if any.
-#========================================================================
-
-PKG_HEADERS	= @PKG_HEADERS@
-
-#========================================================================
-# "PKG_LIB_FILE" refers to the library (dynamic or static as per
-# configuration options) composed of the named objects.
-#========================================================================
-
-PKG_LIB_FILE	= @PKG_LIB_FILE@
-PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@
-
-lib_BINARIES	= $(PKG_LIB_FILE)
-BINARIES	= $(lib_BINARIES)
-
-SHELL		= @SHELL@
-
-srcdir		= @srcdir@
-prefix		= @prefix@
-exec_prefix	= @exec_prefix@
-
-bindir		= @bindir@
-libdir		= @libdir@
-datadir		= @datadir@
-mandir		= @mandir@
-includedir	= @includedir@
-
-DESTDIR		=
-
-PKG_DIR		= $(PACKAGE_NAME)$(PACKAGE_VERSION)
-pkgdatadir	= $(datadir)/$(PKG_DIR)
-pkglibdir	= $(libdir)/$(PKG_DIR)
-pkgincludedir	= $(includedir)/$(PKG_DIR)
-
-top_builddir	= .
-
-INSTALL		= @INSTALL@
-INSTALL_PROGRAM	= @INSTALL_PROGRAM@
-INSTALL_DATA	= @INSTALL_DATA@
-INSTALL_SCRIPT	= @INSTALL_SCRIPT@
-
-PACKAGE_NAME	= @PACKAGE_NAME@
-PACKAGE_VERSION	= @PACKAGE_VERSION@
-CC		= @CC@
-CFLAGS_DEFAULT	= @CFLAGS_DEFAULT@
-CFLAGS_WARNING	= @CFLAGS_WARNING@
-CLEANFILES	= @CLEANFILES@
-EXEEXT		= @EXEEXT@
-LDFLAGS_DEFAULT	= @LDFLAGS_DEFAULT@
-MAKE_LIB	= @MAKE_LIB@
-MAKE_SHARED_LIB	= @MAKE_SHARED_LIB@
-MAKE_STATIC_LIB	= @MAKE_STATIC_LIB@
-MAKE_STUB_LIB	= @MAKE_STUB_LIB@
-OBJEXT		= @OBJEXT@
-RANLIB		= @RANLIB@
-RANLIB_STUB	= @RANLIB_STUB@
-SHLIB_CFLAGS	= @SHLIB_CFLAGS@
-SHLIB_LD	= @SHLIB_LD@
-SHLIB_LD_LIBS	= @SHLIB_LD_LIBS@
-STLIB_LD	= @STLIB_LD@
-#TCL_DEFS	= @TCL_DEFS@
-TCL_BIN_DIR	= @TCL_BIN_DIR@
-TCL_SRC_DIR	= @TCL_SRC_DIR@
-#TK_BIN_DIR	= @TK_BIN_DIR@
-#TK_SRC_DIR	= @TK_SRC_DIR@
-
-# This is no longer necessary even for packages that use private Tcl headers
-#TCL_TOP_DIR_NATIVE	= @TCL_TOP_DIR_NATIVE@
-# Not used, but retained for reference of what libs Tcl required
-#TCL_LIBS	= @TCL_LIBS@
-
-#========================================================================
-# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our
-# package without installing.  The other environment variables allow us
-# to test against an uninstalled Tcl.  Add special env vars that you
-# require for testing here (like TCLX_LIBRARY).
-#========================================================================
-
-EXTRA_PATH	= $(top_builddir):$(TCL_BIN_DIR)
-#EXTRA_PATH	= $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR)
-TCLLIBPATH	= $(top_builddir)
-TCLSH_ENV	= TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \
-		  @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
-		  PATH="$(EXTRA_PATH):$(PATH)" \
-		  TCLLIBPATH="$(TCLLIBPATH)"
-#		  TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library`
-
-TCLSH_PROG	= @TCLSH_PROG@
-TCLSH	= $(TCLSH_ENV) $(TCLSH_PROG)
-
-#WISH_PROG	= @WISH_PROG@
-#WISH	= $(TCLSH_ENV) $(WISH_PROG)
-
-
-SHARED_BUILD	= @SHARED_BUILD@
-
-INCLUDES	= @PKG_INCLUDES@ @TCL_INCLUDES@ -I$(srcdir)/..
-#INCLUDES	= @PKG_INCLUDES@ @TCL_INCLUDES@ @TK_INCLUDES@ @TK_XINCLUDES@
-
-PKG_CFLAGS	= @PKG_CFLAGS@
-
-# TCL_DEFS is not strictly need here, but if you remove it, then you
-# must make sure that configure.in checks for the necessary components
-# that your library may use.  TCL_DEFS can actually be a problem if
-# you do not compile with a similar machine setup as the Tcl core was
-# compiled with.
-#DEFS		= $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
-DEFS		= @DEFS@ $(PKG_CFLAGS)
-
-CONFIG_CLEAN_FILES = Makefile pkgIndex.tcl
-
-CPPFLAGS	= @CPPFLAGS@
-LIBS		= @PKG_LIBS@ @LIBS@
-AR		= @AR@
-CFLAGS		= @CFLAGS@
-COMPILE		= $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-
-#========================================================================
-# Start of user-definable TARGETS section
-#========================================================================
-
-#========================================================================
-# TEA TARGETS.  Please note that the "libraries:" target refers to platform
-# independent files, and the "binaries:" target inclues executable programs and
-# platform-dependent libraries.  Modify these targets so that they install
-# the various pieces of your package.  The make and install rules
-# for the BINARIES that you specified above have already been done.
-#========================================================================
-
-all: binaries libraries doc
-
-#========================================================================
-# The binaries target builds executable programs, Windows .dll's, unix
-# shared/static libraries, and any other platform-dependent files.
-# The list of targets to build for "binaries:" is specified at the top
-# of the Makefile, in the "BINARIES" variable.
-#========================================================================
-
-binaries: $(BINARIES)
-
-libraries:
-
-
-#========================================================================
-# Your doc target should differentiate from doc builds (by the developer)
-# and doc installs (see install-doc), which just install the docs on the
-# end user machine when building from source.
-#========================================================================
-
-doc:
-	@echo "If you have documentation to create, place the commands to"
-	@echo "build the docs in the 'doc:' target.  For example:"
-	@echo "        xml2nroff sample.xml > sample.n"
-	@echo "        xml2html sample.xml > sample.html"
-
-install: all install-binaries install-libraries install-doc
-
-install-binaries: binaries install-lib-binaries install-bin-binaries
-
-#========================================================================
-# This rule installs platform-independent files, such as header files.
-# The list=...; for p in $$list handles the empty list case x-platform.
-#========================================================================
-
-install-libraries: libraries
-	@mkdir -p $(DESTDIR)$(includedir)
-	@echo "Installing header files in $(DESTDIR)$(includedir)"
-	@list='$(PKG_HEADERS)'; for i in $$list; do \
-	    echo "Installing $(srcdir)/$$i" ; \
-	    $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \
-	done;
-
-#========================================================================
-# Install documentation.  Unix manpages should go in the $(mandir)
-# directory.
-#========================================================================
-
-install-doc: doc
-	@mkdir -p $(DESTDIR)$(mandir)/mann
-	@echo "Installing documentation in $(DESTDIR)$(mandir)"
-	@list='$(srcdir)/doc/*.n'; for i in $$list; do \
-	    echo "Installing $$i"; \
-	    rm -f $(DESTDIR)$(mandir)/mann/`basename $$i`; \
-	    $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \
-	done
-
-test: binaries libraries
-	@echo "SQLite TEA distribution does not include tests"
-
-shell: binaries libraries
-	@$(TCLSH) $(SCRIPT)
-
-gdb:
-	$(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT)
-
-depend:
-
-#========================================================================
-# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable
-# mentioned above.  That will ensure that this target is built when you
-# run "make binaries".
-#
-# The $(PKG_OBJECTS) objects are created and linked into the final
-# library.  In most cases these object files will correspond to the
-# source files above.
-#========================================================================
-
-$(PKG_LIB_FILE): $(PKG_OBJECTS)
-	-rm -f $(PKG_LIB_FILE)
-	${MAKE_LIB}
-	$(RANLIB) $(PKG_LIB_FILE)
-
-$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS)
-	-rm -f $(PKG_STUB_LIB_FILE)
-	${MAKE_STUB_LIB}
-	$(RANLIB_STUB) $(PKG_STUB_LIB_FILE)
-
-#========================================================================
-# We need to enumerate the list of .c to .o lines here.
-#
-# In the following lines, $(srcdir) refers to the toplevel directory
-# containing your extension.  If your sources are in a subdirectory,
-# you will have to modify the paths to reflect this:
-#
-# sample.$(OBJEXT): $(srcdir)/generic/sample.c
-# 	$(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@
-#
-# Setting the VPATH variable to a list of paths will cause the makefile
-# to look into these paths when resolving .c to .obj dependencies.
-# As necessary, add $(srcdir):$(srcdir)/compat:....
-#========================================================================
-
-VPATH = $(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win
-
-.c.@OBJEXT@:
-	$(COMPILE) -c `@CYGPATH@ $<` -o $@
-
-#========================================================================
-# Distribution creation
-# You may need to tweak this target to make it work correctly.
-#========================================================================
-
-#COMPRESS	= tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar
-COMPRESS	= gtar zcvf $(PKG_DIR).tar.gz $(PKG_DIR)
-DIST_ROOT	= /tmp/dist
-DIST_DIR	= $(DIST_ROOT)/$(PKG_DIR)
-
-dist-clean:
-	rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*
-
-dist: dist-clean
-	mkdir -p $(DIST_DIR)
-	cp -p $(srcdir)/README* $(srcdir)/license* \
-		$(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \
-		$(DIST_DIR)/
-	chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4
-	chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in
-
-	for i in $(srcdir)/*.[ch]; do \
-	    if [ -f $$i ]; then \
-		cp -p $$i $(DIST_DIR)/ ; \
-	    fi; \
-	done;
-
-	mkdir $(DIST_DIR)/tclconfig
-	cp $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \
-		$(DIST_DIR)/tclconfig/
-	chmod 664 $(DIST_DIR)/tclconfig/tcl.m4
-	chmod +x $(DIST_DIR)/tclconfig/install-sh
-
-	list='demos doc generic library mac tests unix win'; \
-	for p in $$list; do \
-	    if test -d $(srcdir)/$$p ; then \
-		mkdir $(DIST_DIR)/$$p; \
-		cp -p $(srcdir)/$$p/*.* $(DIST_DIR)/$$p/; \
-	    fi; \
-	done
-
-	(cd $(DIST_ROOT); $(COMPRESS);)
-
-#========================================================================
-# End of user-definable section
-#========================================================================
-
-#========================================================================
-# Don't modify the file to clean here.  Instead, set the "CLEANFILES"
-# variable in configure.in
-#========================================================================
-
-clean:  
-	-test -z "$(BINARIES)" || rm -f $(BINARIES)
-	-rm -f *.$(OBJEXT) core *.core
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean: clean
-	-rm -f *.tab.c
-	-rm -f $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log config.status
-
-#========================================================================
-# Install binary object libraries.  On Windows this includes both .dll and
-# .lib files.  Because the .lib files are not explicitly listed anywhere,
-# we need to deduce their existence from the .dll file of the same name.
-# Library files go into the lib directory.
-# In addition, this will generate the pkgIndex.tcl
-# file in the install location (assuming it can find a usable tclsh shell)
-#
-# You should not have to modify this target.
-#========================================================================
-
-install-lib-binaries: binaries
-	@mkdir -p $(DESTDIR)$(pkglibdir)
-	@list='$(lib_BINARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
-	    $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \
-	    stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \
-	    if test "x$$stub" = "xstub"; then \
-		echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \
-		$(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \
-	    else \
-		echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \
-		$(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \
-	    fi; \
-	    ext=`echo $$p|sed -e "s/.*\.//"`; \
-	    if test "x$$ext" = "xdll"; then \
-		lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \
-		if test -f $$lib; then \
-		    echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \
-	            $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \
-		fi; \
-	    fi; \
-	  fi; \
-	done
-	@list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
-	  if test -f $(srcdir)/$$p; then \
-	    destp=`basename $$p`; \
-	    echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \
-	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \
-	  fi; \
-	done
-	@if test "x$(SHARED_BUILD)" = "x1"; then \
-	    echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \
-	    $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \
-	fi
-
-#========================================================================
-# Install binary executables (e.g. .exe files and dependent .dll files)
-# This is for files that must go in the bin directory (located next to
-# wish and tclsh), like dependent .dll files on Windows.
-#
-# You should not have to modify this target, except to define bin_BINARIES
-# above if necessary.
-#========================================================================
-
-install-bin-binaries: binaries
-	@mkdir -p $(DESTDIR)$(bindir)
-	@list='$(bin_BINARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
-	    $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
-	  fi; \
-	done
-
-.SUFFIXES: .c .$(OBJEXT)
-
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-uninstall-binaries:
-	list='$(lib_BINARIES)'; for p in $$list; do \
-	  rm -f $(DESTDIR)$(pkglibdir)/$$p; \
-	done
-	list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
-	  p=`basename $$p`; \
-	  rm -f $(DESTDIR)$(pkglibdir)/$$p; \
-	done
-	list='$(bin_BINARIES)'; for p in $$list; do \
-	  rm -f $(DESTDIR)$(bindir)/$$p; \
-	done
-
-.PHONY: all binaries clean depend distclean doc install libraries test
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/components/external/SQLite-3.8.1/autoconf/tea/README b/components/external/SQLite-3.8.1/autoconf/tea/README
deleted file mode 100644
index 99dc8b8f03..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/tea/README
+++ /dev/null
@@ -1,36 +0,0 @@
-This is the SQLite extension for Tcl using the Tcl Extension
-Architecture (TEA).  For additional information on SQLite see
-
-        http://www.sqlite.org/
-
-
-UNIX BUILD
-==========
-
-Building under most UNIX systems is easy, just run the configure script
-and then run make. For more information about the build process, see
-the tcl/unix/README file in the Tcl src dist. The following minimal
-example will install the extension in the /opt/tcl directory.
-
-	$ cd sqlite-*-tea
-	$ ./configure --prefix=/opt/tcl
-	$ make
-	$ make install
-
-WINDOWS BUILD
-=============
-
-The recommended method to build extensions under windows is to use the
-Msys + Mingw build process. This provides a Unix-style build while
-generating native Windows binaries. Using the Msys + Mingw build tools
-means that you can use the same configure script as per the Unix build
-to create a Makefile. See the tcl/win/README file for the URL of
-the Msys + Mingw download.
-
-If you have VC++ then you may wish to use the files in the win
-subdirectory and build the extension using just VC++. These files have
-been designed to be as generic as possible but will require some
-additional maintenance by the project developer to synchronise with
-the TEA configure.in and Makefile.in files. Instructions for using the
-VC++ makefile are written in the first part of the Makefile.vc
-file.
diff --git a/components/external/SQLite-3.8.1/autoconf/tea/aclocal.m4 b/components/external/SQLite-3.8.1/autoconf/tea/aclocal.m4
deleted file mode 100644
index 0b057391d2..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/tea/aclocal.m4
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Include the TEA standard macro set
-#
-
-builtin(include,tclconfig/tcl.m4)
-
-#
-# Add here whatever m4 macros you want to define for your package
-#
diff --git a/components/external/SQLite-3.8.1/autoconf/tea/configure.in b/components/external/SQLite-3.8.1/autoconf/tea/configure.in
deleted file mode 100644
index ec9c565c6f..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/tea/configure.in
+++ /dev/null
@@ -1,200 +0,0 @@
-#!/bin/bash -norc
-dnl	This file is an input file used by the GNU "autoconf" program to
-dnl	generate the file "configure", which is run during Tcl installation
-dnl	to configure the system for the local environment.
-#
-# RCS: @(#) $Id: configure.in,v 1.43 2005/07/26 19:17:05 mdejong Exp $
-
-#-----------------------------------------------------------------------
-# Sample configure.in for Tcl Extensions.  The only places you should
-# need to modify this file are marked by the string __CHANGE__
-#-----------------------------------------------------------------------
-
-#-----------------------------------------------------------------------
-# __CHANGE__
-# Set your package name and version numbers here.
-#
-# This initializes the environment with PACKAGE_NAME and PACKAGE_VERSION
-# set as provided.  These will also be added as -D defs in your Makefile
-# so you can encode the package version directly into the source files.
-#-----------------------------------------------------------------------
-
-AC_INIT([sqlite], [3.7.4])
-
-#--------------------------------------------------------------------
-# Call TEA_INIT as the first TEA_ macro to set up initial vars.
-# This will define a ${TEA_PLATFORM} variable == "unix" or "windows"
-# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE.
-#--------------------------------------------------------------------
-
-TEA_INIT([3.9])
-
-AC_CONFIG_AUX_DIR(tclconfig)
-
-#--------------------------------------------------------------------
-# Load the tclConfig.sh file
-#--------------------------------------------------------------------
-
-TEA_PATH_TCLCONFIG
-TEA_LOAD_TCLCONFIG
-
-#--------------------------------------------------------------------
-# Load the tkConfig.sh file if necessary (Tk extension)
-#--------------------------------------------------------------------
-
-#TEA_PATH_TKCONFIG
-#TEA_LOAD_TKCONFIG
-
-#-----------------------------------------------------------------------
-# Handle the --prefix=... option by defaulting to what Tcl gave.
-# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER.
-#-----------------------------------------------------------------------
-
-TEA_PREFIX
-
-#-----------------------------------------------------------------------
-# Standard compiler checks.
-# This sets up CC by using the CC env var, or looks for gcc otherwise.
-# This also calls AC_PROG_CC, AC_PROG_INSTALL and a few others to create
-# the basic setup necessary to compile executables.
-#-----------------------------------------------------------------------
-
-TEA_SETUP_COMPILER
-
-#-----------------------------------------------------------------------
-# __CHANGE__
-# Specify the C source files to compile in TEA_ADD_SOURCES,
-# public headers that need to be installed in TEA_ADD_HEADERS,
-# stub library C source files to compile in TEA_ADD_STUB_SOURCES,
-# and runtime Tcl library files in TEA_ADD_TCL_SOURCES.
-# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS
-# and PKG_TCL_SOURCES.
-#-----------------------------------------------------------------------
-
-TEA_ADD_SOURCES([tclsqlite3.c])
-TEA_ADD_HEADERS([])
-TEA_ADD_INCLUDES([-I\"`\${CYGPATH} \${srcdir}/generic`\"])
-TEA_ADD_LIBS([])
-TEA_ADD_CFLAGS([-DSQLITE_ENABLE_FTS3=1])
-TEA_ADD_CFLAGS([-DSQLITE_3_SUFFIX_ONLY=1])
-TEA_ADD_CFLAGS([-DSQLITE_ENABLE_RTREE=1])
-TEA_ADD_CFLAGS([-DSQLITE_OMIT_DEPRECATED=1])
-TEA_ADD_STUB_SOURCES([])
-TEA_ADD_TCL_SOURCES([])
-
-#--------------------------------------------------------------------
-# The --with-system-sqlite causes the TCL bindings to SQLite to use
-# the system shared library for SQLite rather than statically linking
-# against its own private copy.  This is dangerous and leads to
-# undersirable dependences and is not recommended.
-# Patchs from rmax.
-#--------------------------------------------------------------------
-AC_ARG_WITH([system-sqlite],
- [AC_HELP_STRING([--with-system-sqlite],
-   [use a system-supplied libsqlite3 instead of the bundled one])],
- [], [with_system_sqlite=no])
-if test x$with_system_sqlite != xno; then
- AC_CHECK_HEADER([sqlite3.h],
-   [AC_CHECK_LIB([sqlite3],[sqlite3_initialize],
-     [AC_DEFINE(USE_SYSTEM_SQLITE)
-      LIBS="$LIBS -lsqlite3"])])
-fi
-
-#--------------------------------------------------------------------
-# __CHANGE__
-# Choose which headers you need.  Extension authors should try very
-# hard to only rely on the Tcl public header files.  Internal headers
-# contain private data structures and are subject to change without
-# notice.
-# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG
-#--------------------------------------------------------------------
-
-TEA_PUBLIC_TCL_HEADERS
-#TEA_PRIVATE_TCL_HEADERS
-
-#TEA_PUBLIC_TK_HEADERS
-#TEA_PRIVATE_TK_HEADERS
-#TEA_PATH_X
-
-#--------------------------------------------------------------------
-# Check whether --enable-threads or --disable-threads was given.
-# This auto-enables if Tcl was compiled threaded.
-#--------------------------------------------------------------------
-
-TEA_ENABLE_THREADS
-if test "${TCL_THREADS}" = "1" ; then
-    AC_DEFINE(SQLITE_THREADSAFE, 1, [Trigger sqlite threadsafe build])
-    # Not automatically added by Tcl because its assumed Tcl links to them,
-    # but it may not if it isn't really a threaded build.
-    TEA_ADD_LIBS([$THREADS_LIBS])
-else
-    AC_DEFINE(SQLITE_THREADSAFE, 0, [Trigger sqlite non-threadsafe build])
-fi
-
-#--------------------------------------------------------------------
-# The statement below defines a collection of symbols related to
-# building as a shared library instead of a static library.
-#--------------------------------------------------------------------
-
-TEA_ENABLE_SHARED
-
-#--------------------------------------------------------------------
-# This macro figures out what flags to use with the compiler/linker
-# when building shared/static debug/optimized objects.  This information
-# can be taken from the tclConfig.sh file, but this figures it all out.
-#--------------------------------------------------------------------
-
-TEA_CONFIG_CFLAGS
-
-#--------------------------------------------------------------------
-# Set the default compiler switches based on the --enable-symbols option.
-#--------------------------------------------------------------------
-
-TEA_ENABLE_SYMBOLS
-
-#--------------------------------------------------------------------
-# Everyone should be linking against the Tcl stub library.  If you
-# can't for some reason, remove this definition.  If you aren't using
-# stubs, you also need to modify the SHLIB_LD_LIBS setting below to
-# link against the non-stubbed Tcl library.  Add Tk too if necessary.
-#--------------------------------------------------------------------
-
-AC_DEFINE(USE_TCL_STUBS, 1, [Use Tcl stubs])
-#AC_DEFINE(USE_TK_STUBS, 1, [Use Tk stubs])
-
-
-#--------------------------------------------------------------------
-# Redefine fdatasync as fsync on systems that lack fdatasync
-#--------------------------------------------------------------------
-
-AC_CHECK_FUNC(fdatasync, , AC_DEFINE(fdatasync, fsync))
-
-AC_FUNC_STRERROR_R
-
-
-#--------------------------------------------------------------------
-# This macro generates a line to use when building a library.  It
-# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS,
-# and TEA_LOAD_TCLCONFIG macros above.
-#--------------------------------------------------------------------
-
-TEA_MAKE_LIB
-
-#--------------------------------------------------------------------
-# Determine the name of the tclsh and/or wish executables in the
-# Tcl and Tk build directories or the location they were installed
-# into. These paths are used to support running test cases only,
-# the Makefile should not be making use of these paths to generate
-# a pkgIndex.tcl file or anything else at extension build time.
-#--------------------------------------------------------------------
-
-TEA_PROG_TCLSH
-#TEA_PROG_WISH
-
-#--------------------------------------------------------------------
-# Finally, substitute all of the various values into the Makefile.
-# You may alternatively have a special pkgIndex.tcl.in or other files
-# which require substituting th AC variables in.  Include these here.
-#--------------------------------------------------------------------
-
-AC_OUTPUT([Makefile pkgIndex.tcl])
diff --git a/components/external/SQLite-3.8.1/autoconf/tea/doc/sqlite3.n b/components/external/SQLite-3.8.1/autoconf/tea/doc/sqlite3.n
deleted file mode 100644
index cee765f94c..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/tea/doc/sqlite3.n
+++ /dev/null
@@ -1,15 +0,0 @@
-.TH sqlite3 n 4.1 "Tcl-Extensions"
-.HS sqlite3 tcl
-.BS
-.SH NAME
-sqlite3 \- an interface to the SQLite3 database engine
-.SH SYNOPSIS
-\fBsqlite3\fI command_name ?filename?\fR
-.br
-.SH DESCRIPTION
-SQLite3 is a self-contains, zero-configuration, transactional SQL database
-engine.  This extension provides an easy to use interface for accessing
-SQLite database files from Tcl.
-.PP
-For full documentation see http://www.sqlite.org/ and
-in particular http://www.sqlite.org/tclsqlite.html.
diff --git a/components/external/SQLite-3.8.1/autoconf/tea/license.terms b/components/external/SQLite-3.8.1/autoconf/tea/license.terms
deleted file mode 100644
index 723c4cd3c6..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/tea/license.terms
+++ /dev/null
@@ -1,6 +0,0 @@
-The author disclaims copyright to this source code.  In place of
-a legal notice, here is a blessing:
-
-    May you do good and not evil.
-    May you find forgiveness for yourself and forgive others.
-    May you share freely, never taking more than you give.
diff --git a/components/external/SQLite-3.8.1/autoconf/tea/pkgIndex.tcl.in b/components/external/SQLite-3.8.1/autoconf/tea/pkgIndex.tcl.in
deleted file mode 100644
index bc585f73b3..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/tea/pkgIndex.tcl.in
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Tcl package index file
-#
-# Note sqlite*3* init specifically
-#
-package ifneeded sqlite3 @PACKAGE_VERSION@ \
-    [list load [file join $dir @PKG_LIB_FILE@] Sqlite3]
diff --git a/components/external/SQLite-3.8.1/autoconf/tea/tclconfig/install-sh b/components/external/SQLite-3.8.1/autoconf/tea/tclconfig/install-sh
deleted file mode 100644
index 0ff4b6a08e..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/tea/tclconfig/install-sh
+++ /dev/null
@@ -1,119 +0,0 @@
-#!/bin/sh
-
-#
-# install - install a program, script, or datafile
-# This comes from X11R5; it is not part of GNU.
-#
-# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-#
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-
-instcmd="$mvprog"
-chmodcmd=""
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:  no input file specified"
-	exit 1
-fi
-
-if [ x"$dst" = x ]
-then
-	echo "install:  no destination specified"
-	exit 1
-fi
-
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-if [ -d $dst ]
-then
-	dst="$dst"/`basename $src`
-fi
-
-# Make a temp file name in the proper directory.
-
-dstdir=`dirname $dst`
-dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-$doit $instcmd $src $dsttmp
-
-# and set any options; do chmod last to preserve setuid bits
-
-if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; fi
-if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; fi
-if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; fi
-if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; fi
-
-# Now rename the file to the real destination.
-
-$doit $rmcmd $dst
-$doit $mvcmd $dsttmp $dst
-
-
-exit 0
diff --git a/components/external/SQLite-3.8.1/autoconf/tea/tclconfig/tcl.m4 b/components/external/SQLite-3.8.1/autoconf/tea/tclconfig/tcl.m4
deleted file mode 100644
index f910bc2a1f..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/tea/tclconfig/tcl.m4
+++ /dev/null
@@ -1,3997 +0,0 @@
-# tcl.m4 --
-#
-#	This file provides a set of autoconf macros to help TEA-enable
-#	a Tcl extension.
-#
-# Copyright (c) 1999-2000 Ajuba Solutions.
-# Copyright (c) 2002-2005 ActiveState Corporation.
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-#
-# RCS: @(#) $Id: tcl.m4,v 1.145 2010/08/17 00:33:40 hobbs Exp $
-
-AC_PREREQ(2.57)
-
-dnl TEA extensions pass us the version of TEA they think they
-dnl are compatible with (must be set in TEA_INIT below)
-dnl TEA_VERSION="3.9"
-
-# Possible values for key variables defined:
-#
-# TEA_WINDOWINGSYSTEM - win32 aqua x11 (mirrors 'tk windowingsystem')
-# TEA_PLATFORM        - windows unix
-#
-
-#------------------------------------------------------------------------
-# TEA_PATH_TCLCONFIG --
-#
-#	Locate the tclConfig.sh file and perform a sanity check on
-#	the Tcl compile flags
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--with-tcl=...
-#
-#	Defines the following vars:
-#		TCL_BIN_DIR	Full path to the directory containing
-#				the tclConfig.sh file
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_PATH_TCLCONFIG], [
-    dnl TEA specific: Make sure we are initialized
-    AC_REQUIRE([TEA_INIT])
-    #
-    # Ok, lets find the tcl configuration
-    # First, look for one uninstalled.
-    # the alternative search directory is invoked by --with-tcl
-    #
-
-    if test x"${no_tcl}" = x ; then
-	# we reset no_tcl in case something fails here
-	no_tcl=true
-	AC_ARG_WITH(tcl,
-	    AC_HELP_STRING([--with-tcl],
-		[directory containing tcl configuration (tclConfig.sh)]),
-	    with_tclconfig="${withval}")
-	AC_MSG_CHECKING([for Tcl configuration])
-	AC_CACHE_VAL(ac_cv_c_tclconfig,[
-
-	    # First check to see if --with-tcl was specified.
-	    if test x"${with_tclconfig}" != x ; then
-		case "${with_tclconfig}" in
-		    */tclConfig.sh )
-			if test -f "${with_tclconfig}"; then
-			    AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself])
-			    with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`"
-			fi ;;
-		esac
-		if test -f "${with_tclconfig}/tclConfig.sh" ; then
-		    ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`"
-		else
-		    AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh])
-		fi
-	    fi
-
-	    # then check for a private Tcl installation
-	    if test x"${ac_cv_c_tclconfig}" = x ; then
-		for i in \
-			../tcl \
-			`ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
-			`ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \
-			`ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
-			../../tcl \
-			`ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
-			`ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \
-			`ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
-			../../../tcl \
-			`ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
-			`ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \
-			`ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
-		    if test "${TEA_PLATFORM}" = "windows" \
-			    -a -f "$i/win/tclConfig.sh" ; then
-			ac_cv_c_tclconfig="`(cd $i/win; pwd)`"
-			break
-		    fi
-		    if test -f "$i/unix/tclConfig.sh" ; then
-			ac_cv_c_tclconfig="`(cd $i/unix; pwd)`"
-			break
-		    fi
-		done
-	    fi
-
-	    # on Darwin, check in Framework installation locations
-	    if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then
-		for i in `ls -d ~/Library/Frameworks 2>/dev/null` \
-			`ls -d /Library/Frameworks 2>/dev/null` \
-			`ls -d /Network/Library/Frameworks 2>/dev/null` \
-			`ls -d /System/Library/Frameworks 2>/dev/null` \
-			; do
-		    if test -f "$i/Tcl.framework/tclConfig.sh" ; then
-			ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`"
-			break
-		    fi
-		done
-	    fi
-
-	    # TEA specific: on Windows, check in common installation locations
-	    if test "${TEA_PLATFORM}" = "windows" \
-		-a x"${ac_cv_c_tclconfig}" = x ; then
-		for i in `ls -d C:/Tcl/lib 2>/dev/null` \
-			`ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \
-			; do
-		    if test -f "$i/tclConfig.sh" ; then
-			ac_cv_c_tclconfig="`(cd $i; pwd)`"
-			break
-		    fi
-		done
-	    fi
-
-	    # check in a few common install locations
-	    if test x"${ac_cv_c_tclconfig}" = x ; then
-		for i in `ls -d ${libdir} 2>/dev/null` \
-			`ls -d ${exec_prefix}/lib 2>/dev/null` \
-			`ls -d ${prefix}/lib 2>/dev/null` \
-			`ls -d /usr/local/lib 2>/dev/null` \
-			`ls -d /usr/contrib/lib 2>/dev/null` \
-			`ls -d /usr/lib 2>/dev/null` \
-			`ls -d /usr/lib64 2>/dev/null` \
-			; do
-		    if test -f "$i/tclConfig.sh" ; then
-			ac_cv_c_tclconfig="`(cd $i; pwd)`"
-			break
-		    fi
-		done
-	    fi
-
-	    # check in a few other private locations
-	    if test x"${ac_cv_c_tclconfig}" = x ; then
-		for i in \
-			${srcdir}/../tcl \
-			`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
-			`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \
-			`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
-		    if test "${TEA_PLATFORM}" = "windows" \
-			    -a -f "$i/win/tclConfig.sh" ; then
-			ac_cv_c_tclconfig="`(cd $i/win; pwd)`"
-			break
-		    fi
-		    if test -f "$i/unix/tclConfig.sh" ; then
-			ac_cv_c_tclconfig="`(cd $i/unix; pwd)`"
-			break
-		    fi
-		done
-	    fi
-	])
-
-	if test x"${ac_cv_c_tclconfig}" = x ; then
-	    TCL_BIN_DIR="# no Tcl configs found"
-	    AC_MSG_ERROR([Can't find Tcl configuration definitions])
-	else
-	    no_tcl=
-	    TCL_BIN_DIR="${ac_cv_c_tclconfig}"
-	    AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh])
-	fi
-    fi
-])
-
-#------------------------------------------------------------------------
-# TEA_PATH_TKCONFIG --
-#
-#	Locate the tkConfig.sh file
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--with-tk=...
-#
-#	Defines the following vars:
-#		TK_BIN_DIR	Full path to the directory containing
-#				the tkConfig.sh file
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_PATH_TKCONFIG], [
-    #
-    # Ok, lets find the tk configuration
-    # First, look for one uninstalled.
-    # the alternative search directory is invoked by --with-tk
-    #
-
-    if test x"${no_tk}" = x ; then
-	# we reset no_tk in case something fails here
-	no_tk=true
-	AC_ARG_WITH(tk,
-	    AC_HELP_STRING([--with-tk],
-		[directory containing tk configuration (tkConfig.sh)]),
-	    with_tkconfig="${withval}")
-	AC_MSG_CHECKING([for Tk configuration])
-	AC_CACHE_VAL(ac_cv_c_tkconfig,[
-
-	    # First check to see if --with-tkconfig was specified.
-	    if test x"${with_tkconfig}" != x ; then
-		case "${with_tkconfig}" in
-		    */tkConfig.sh )
-			if test -f "${with_tkconfig}"; then
-			    AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself])
-			    with_tkconfig="`echo "${with_tkconfig}" | sed 's!/tkConfig\.sh$!!'`"
-			fi ;;
-		esac
-		if test -f "${with_tkconfig}/tkConfig.sh" ; then
-		    ac_cv_c_tkconfig="`(cd "${with_tkconfig}"; pwd)`"
-		else
-		    AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh])
-		fi
-	    fi
-
-	    # then check for a private Tk library
-	    if test x"${ac_cv_c_tkconfig}" = x ; then
-		for i in \
-			../tk \
-			`ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
-			`ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \
-			`ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \
-			../../tk \
-			`ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
-			`ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \
-			`ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \
-			../../../tk \
-			`ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
-			`ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \
-			`ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
-		    if test "${TEA_PLATFORM}" = "windows" \
-			    -a -f "$i/win/tkConfig.sh" ; then
-			ac_cv_c_tkconfig="`(cd $i/win; pwd)`"
-			break
-		    fi
-		    if test -f "$i/unix/tkConfig.sh" ; then
-			ac_cv_c_tkconfig="`(cd $i/unix; pwd)`"
-			break
-		    fi
-		done
-	    fi
-
-	    # on Darwin, check in Framework installation locations
-	    if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then
-		for i in `ls -d ~/Library/Frameworks 2>/dev/null` \
-			`ls -d /Library/Frameworks 2>/dev/null` \
-			`ls -d /Network/Library/Frameworks 2>/dev/null` \
-			`ls -d /System/Library/Frameworks 2>/dev/null` \
-			; do
-		    if test -f "$i/Tk.framework/tkConfig.sh" ; then
-			ac_cv_c_tkconfig="`(cd $i/Tk.framework; pwd)`"
-			break
-		    fi
-		done
-	    fi
-
-	    # check in a few common install locations
-	    if test x"${ac_cv_c_tkconfig}" = x ; then
-		for i in `ls -d ${libdir} 2>/dev/null` \
-			`ls -d ${exec_prefix}/lib 2>/dev/null` \
-			`ls -d ${prefix}/lib 2>/dev/null` \
-			`ls -d /usr/local/lib 2>/dev/null` \
-			`ls -d /usr/contrib/lib 2>/dev/null` \
-			`ls -d /usr/lib 2>/dev/null` \
-			`ls -d /usr/lib64 2>/dev/null` \
-			; do
-		    if test -f "$i/tkConfig.sh" ; then
-			ac_cv_c_tkconfig="`(cd $i; pwd)`"
-			break
-		    fi
-		done
-	    fi
-
-	    # TEA specific: on Windows, check in common installation locations
-	    if test "${TEA_PLATFORM}" = "windows" \
-		-a x"${ac_cv_c_tkconfig}" = x ; then
-		for i in `ls -d C:/Tcl/lib 2>/dev/null` \
-			`ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \
-			; do
-		    if test -f "$i/tkConfig.sh" ; then
-			ac_cv_c_tkconfig="`(cd $i; pwd)`"
-			break
-		    fi
-		done
-	    fi
-
-	    # check in a few other private locations
-	    if test x"${ac_cv_c_tkconfig}" = x ; then
-		for i in \
-			${srcdir}/../tk \
-			`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
-			`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \
-			`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
-		    if test "${TEA_PLATFORM}" = "windows" \
-			    -a -f "$i/win/tkConfig.sh" ; then
-			ac_cv_c_tkconfig="`(cd $i/win; pwd)`"
-			break
-		    fi
-		    if test -f "$i/unix/tkConfig.sh" ; then
-			ac_cv_c_tkconfig="`(cd $i/unix; pwd)`"
-			break
-		    fi
-		done
-	    fi
-	])
-
-	if test x"${ac_cv_c_tkconfig}" = x ; then
-	    TK_BIN_DIR="# no Tk configs found"
-	    AC_MSG_ERROR([Can't find Tk configuration definitions])
-	else
-	    no_tk=
-	    TK_BIN_DIR="${ac_cv_c_tkconfig}"
-	    AC_MSG_RESULT([found ${TK_BIN_DIR}/tkConfig.sh])
-	fi
-    fi
-])
-
-#------------------------------------------------------------------------
-# TEA_LOAD_TCLCONFIG --
-#
-#	Load the tclConfig.sh file
-#
-# Arguments:
-#
-#	Requires the following vars to be set:
-#		TCL_BIN_DIR
-#
-# Results:
-#
-#	Subst the following vars:
-#		TCL_BIN_DIR
-#		TCL_SRC_DIR
-#		TCL_LIB_FILE
-#
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_LOAD_TCLCONFIG], [
-    AC_MSG_CHECKING([for existence of ${TCL_BIN_DIR}/tclConfig.sh])
-
-    if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then
-        AC_MSG_RESULT([loading])
-	. "${TCL_BIN_DIR}/tclConfig.sh"
-    else
-        AC_MSG_RESULT([could not find ${TCL_BIN_DIR}/tclConfig.sh])
-    fi
-
-    # eval is required to do the TCL_DBGX substitution
-    eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\""
-    eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\""
-
-    # If the TCL_BIN_DIR is the build directory (not the install directory),
-    # then set the common variable name to the value of the build variables.
-    # For example, the variable TCL_LIB_SPEC will be set to the value
-    # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC
-    # instead of TCL_BUILD_LIB_SPEC since it will work with both an
-    # installed and uninstalled version of Tcl.
-    if test -f "${TCL_BIN_DIR}/Makefile" ; then
-        TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}"
-        TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}"
-        TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}"
-    elif test "`uname -s`" = "Darwin"; then
-	# If Tcl was built as a framework, attempt to use the libraries
-	# from the framework at the given location so that linking works
-	# against Tcl.framework installed in an arbitrary location.
-	case ${TCL_DEFS} in
-	    *TCL_FRAMEWORK*)
-		if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then
-		    for i in "`cd "${TCL_BIN_DIR}"; pwd`" \
-			     "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do
-			if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then
-			    TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}"
-			    break
-			fi
-		    done
-		fi
-		if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then
-		    TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}"  | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}"
-		    TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"
-		fi
-		;;
-	esac
-    fi
-
-    # eval is required to do the TCL_DBGX substitution
-    eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\""
-    eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\""
-    eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\""
-    eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\""
-
-    AC_SUBST(TCL_VERSION)
-    AC_SUBST(TCL_PATCH_LEVEL)
-    AC_SUBST(TCL_BIN_DIR)
-    AC_SUBST(TCL_SRC_DIR)
-
-    AC_SUBST(TCL_LIB_FILE)
-    AC_SUBST(TCL_LIB_FLAG)
-    AC_SUBST(TCL_LIB_SPEC)
-
-    AC_SUBST(TCL_STUB_LIB_FILE)
-    AC_SUBST(TCL_STUB_LIB_FLAG)
-    AC_SUBST(TCL_STUB_LIB_SPEC)
-
-    case "`uname -s`" in
-	*CYGWIN_*)
-	    AC_MSG_CHECKING([for cygwin variant])
-	    case ${TCL_EXTRA_CFLAGS} in
-		*-mwin32*|*-mno-cygwin*)
-		    TEA_PLATFORM="windows"
-		    CFLAGS="$CFLAGS -mwin32"
-		    AC_MSG_RESULT([win32])
-		    ;;
-		*)
-		    TEA_PLATFORM="unix"
-		    AC_MSG_RESULT([unix])
-		    ;;
-	    esac
-	    EXEEXT=".exe"
-	    ;;
-	*)
-	    ;;
-    esac
-
-    # Do this here as we have fully defined TEA_PLATFORM now
-    if test "${TEA_PLATFORM}" = "windows" ; then
-	# The BUILD_$pkg is to define the correct extern storage class
-	# handling when making this package
-	AC_DEFINE_UNQUOTED(BUILD_${PACKAGE_NAME})
-	CLEANFILES="$CLEANFILES *.lib *.dll *.pdb"
-    fi
-
-    # TEA specific:
-    AC_SUBST(CLEANFILES)
-    AC_SUBST(TCL_LIBS)
-    AC_SUBST(TCL_DEFS)
-    AC_SUBST(TCL_EXTRA_CFLAGS)
-    AC_SUBST(TCL_LD_FLAGS)
-    AC_SUBST(TCL_SHLIB_LD_LIBS)
-])
-
-#------------------------------------------------------------------------
-# TEA_LOAD_TKCONFIG --
-#
-#	Load the tkConfig.sh file
-#
-# Arguments:
-#
-#	Requires the following vars to be set:
-#		TK_BIN_DIR
-#
-# Results:
-#
-#	Sets the following vars that should be in tkConfig.sh:
-#		TK_BIN_DIR
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_LOAD_TKCONFIG], [
-    AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh])
-
-    if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then
-        AC_MSG_RESULT([loading])
-	. "${TK_BIN_DIR}/tkConfig.sh"
-    else
-        AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh])
-    fi
-
-    # eval is required to do the TK_DBGX substitution
-    eval "TK_LIB_FILE=\"${TK_LIB_FILE}\""
-    eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\""
-
-    # If the TK_BIN_DIR is the build directory (not the install directory),
-    # then set the common variable name to the value of the build variables.
-    # For example, the variable TK_LIB_SPEC will be set to the value
-    # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC
-    # instead of TK_BUILD_LIB_SPEC since it will work with both an
-    # installed and uninstalled version of Tcl.
-    if test -f "${TK_BIN_DIR}/Makefile" ; then
-        TK_LIB_SPEC="${TK_BUILD_LIB_SPEC}"
-        TK_STUB_LIB_SPEC="${TK_BUILD_STUB_LIB_SPEC}"
-        TK_STUB_LIB_PATH="${TK_BUILD_STUB_LIB_PATH}"
-    elif test "`uname -s`" = "Darwin"; then
-	# If Tk was built as a framework, attempt to use the libraries
-	# from the framework at the given location so that linking works
-	# against Tk.framework installed in an arbitrary location.
-	case ${TK_DEFS} in
-	    *TK_FRAMEWORK*)
-		if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then
-		    for i in "`cd "${TK_BIN_DIR}"; pwd`" \
-			     "`cd "${TK_BIN_DIR}"/../..; pwd`"; do
-			if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then
-			    TK_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TK_LIB_FILE}"
-			    break
-			fi
-		    done
-		fi
-		if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then
-		    TK_STUB_LIB_SPEC="-L` echo "${TK_BIN_DIR}"  | sed -e 's/ /\\\\ /g'` ${TK_STUB_LIB_FLAG}"
-		    TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"
-		fi
-		;;
-	esac
-    fi
-
-    # eval is required to do the TK_DBGX substitution
-    eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\""
-    eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\""
-    eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\""
-    eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\""
-
-    # TEA specific: Ensure windowingsystem is defined
-    if test "${TEA_PLATFORM}" = "unix" ; then
-	case ${TK_DEFS} in
-	    *MAC_OSX_TK*)
-		AC_DEFINE(MAC_OSX_TK, 1, [Are we building against Mac OS X TkAqua?])
-		TEA_WINDOWINGSYSTEM="aqua"
-		;;
-	    *)
-		TEA_WINDOWINGSYSTEM="x11"
-		;;
-	esac
-    elif test "${TEA_PLATFORM}" = "windows" ; then
-	TEA_WINDOWINGSYSTEM="win32"
-    fi
-
-    AC_SUBST(TK_VERSION)
-    AC_SUBST(TK_BIN_DIR)
-    AC_SUBST(TK_SRC_DIR)
-
-    AC_SUBST(TK_LIB_FILE)
-    AC_SUBST(TK_LIB_FLAG)
-    AC_SUBST(TK_LIB_SPEC)
-
-    AC_SUBST(TK_STUB_LIB_FILE)
-    AC_SUBST(TK_STUB_LIB_FLAG)
-    AC_SUBST(TK_STUB_LIB_SPEC)
-
-    # TEA specific:
-    AC_SUBST(TK_LIBS)
-    AC_SUBST(TK_XINCLUDES)
-])
-
-#------------------------------------------------------------------------
-# TEA_PROG_TCLSH
-#	Determine the fully qualified path name of the tclsh executable
-#	in the Tcl build directory or the tclsh installed in a bin
-#	directory. This macro will correctly determine the name
-#	of the tclsh executable even if tclsh has not yet been
-#	built in the build directory. The tclsh found is always
-#	associated with a tclConfig.sh file. This tclsh should be used
-#	only for running extension test cases. It should never be
-#	or generation of files (like pkgIndex.tcl) at build time.
-#
-# Arguments
-#	none
-#
-# Results
-#	Subst's the following values:
-#		TCLSH_PROG
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_PROG_TCLSH], [
-    AC_MSG_CHECKING([for tclsh])
-    if test -f "${TCL_BIN_DIR}/Makefile" ; then
-        # tclConfig.sh is in Tcl build directory
-        if test "${TEA_PLATFORM}" = "windows"; then
-            TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}"
-        else
-            TCLSH_PROG="${TCL_BIN_DIR}/tclsh"
-        fi
-    else
-        # tclConfig.sh is in install location
-        if test "${TEA_PLATFORM}" = "windows"; then
-            TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}"
-        else
-            TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}"
-        fi
-        list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \
-              `ls -d ${TCL_BIN_DIR}/..     2>/dev/null` \
-              `ls -d ${TCL_PREFIX}/bin     2>/dev/null`"
-        for i in $list ; do
-            if test -f "$i/${TCLSH_PROG}" ; then
-                REAL_TCL_BIN_DIR="`cd "$i"; pwd`/"
-                break
-            fi
-        done
-        TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}"
-    fi
-    AC_MSG_RESULT([${TCLSH_PROG}])
-    AC_SUBST(TCLSH_PROG)
-])
-
-#------------------------------------------------------------------------
-# TEA_PROG_WISH
-#	Determine the fully qualified path name of the wish executable
-#	in the Tk build directory or the wish installed in a bin
-#	directory. This macro will correctly determine the name
-#	of the wish executable even if wish has not yet been
-#	built in the build directory. The wish found is always
-#	associated with a tkConfig.sh file. This wish should be used
-#	only for running extension test cases. It should never be
-#	or generation of files (like pkgIndex.tcl) at build time.
-#
-# Arguments
-#	none
-#
-# Results
-#	Subst's the following values:
-#		WISH_PROG
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_PROG_WISH], [
-    AC_MSG_CHECKING([for wish])
-    if test -f "${TK_BIN_DIR}/Makefile" ; then
-        # tkConfig.sh is in Tk build directory
-        if test "${TEA_PLATFORM}" = "windows"; then
-            WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}"
-        else
-            WISH_PROG="${TK_BIN_DIR}/wish"
-        fi
-    else
-        # tkConfig.sh is in install location
-        if test "${TEA_PLATFORM}" = "windows"; then
-            WISH_PROG="wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}"
-        else
-            WISH_PROG="wish${TK_MAJOR_VERSION}.${TK_MINOR_VERSION}${TK_DBGX}"
-        fi
-        list="`ls -d ${TK_BIN_DIR}/../bin 2>/dev/null` \
-              `ls -d ${TK_BIN_DIR}/..     2>/dev/null` \
-              `ls -d ${TK_PREFIX}/bin     2>/dev/null`"
-        for i in $list ; do
-            if test -f "$i/${WISH_PROG}" ; then
-                REAL_TK_BIN_DIR="`cd "$i"; pwd`/"
-                break
-            fi
-        done
-        WISH_PROG="${REAL_TK_BIN_DIR}${WISH_PROG}"
-    fi
-    AC_MSG_RESULT([${WISH_PROG}])
-    AC_SUBST(WISH_PROG)
-])
-
-#------------------------------------------------------------------------
-# TEA_ENABLE_SHARED --
-#
-#	Allows the building of shared libraries
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--enable-shared=yes|no
-#
-#	Defines the following vars:
-#		STATIC_BUILD	Used for building import/export libraries
-#				on Windows.
-#
-#	Sets the following vars:
-#		SHARED_BUILD	Value of 1 or 0
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_ENABLE_SHARED], [
-    AC_MSG_CHECKING([how to build libraries])
-    AC_ARG_ENABLE(shared,
-	AC_HELP_STRING([--enable-shared],
-	    [build and link with shared libraries (default: on)]),
-	[tcl_ok=$enableval], [tcl_ok=yes])
-
-    if test "${enable_shared+set}" = set; then
-	enableval="$enable_shared"
-	tcl_ok=$enableval
-    else
-	tcl_ok=yes
-    fi
-
-    if test "$tcl_ok" = "yes" ; then
-	AC_MSG_RESULT([shared])
-	SHARED_BUILD=1
-    else
-	AC_MSG_RESULT([static])
-	SHARED_BUILD=0
-	AC_DEFINE(STATIC_BUILD, 1, [Is this a static build?])
-    fi
-    AC_SUBST(SHARED_BUILD)
-])
-
-#------------------------------------------------------------------------
-# TEA_ENABLE_THREADS --
-#
-#	Specify if thread support should be enabled.  If "yes" is specified
-#	as an arg (optional), threads are enabled by default, "no" means
-#	threads are disabled.  "yes" is the default.
-#
-#	TCL_THREADS is checked so that if you are compiling an extension
-#	against a threaded core, your extension must be compiled threaded
-#	as well.
-#
-#	Note that it is legal to have a thread enabled extension run in a
-#	threaded or non-threaded Tcl core, but a non-threaded extension may
-#	only run in a non-threaded Tcl core.
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--enable-threads
-#
-#	Sets the following vars:
-#		THREADS_LIBS	Thread library(s)
-#
-#	Defines the following vars:
-#		TCL_THREADS
-#		_REENTRANT
-#		_THREAD_SAFE
-#
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_ENABLE_THREADS], [
-    AC_ARG_ENABLE(threads,
-	AC_HELP_STRING([--enable-threads],
-	    [build with threads]),
-	[tcl_ok=$enableval], [tcl_ok=yes])
-
-    if test "${enable_threads+set}" = set; then
-	enableval="$enable_threads"
-	tcl_ok=$enableval
-    else
-	tcl_ok=yes
-    fi
-
-    if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then
-	TCL_THREADS=1
-
-	if test "${TEA_PLATFORM}" != "windows" ; then
-	    # We are always OK on Windows, so check what this platform wants:
-
-	    # USE_THREAD_ALLOC tells us to try the special thread-based
-	    # allocator that significantly reduces lock contention
-	    AC_DEFINE(USE_THREAD_ALLOC, 1,
-		[Do we want to use the threaded memory allocator?])
-	    AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
-	    if test "`uname -s`" = "SunOS" ; then
-		AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
-			[Do we really want to follow the standard? Yes we do!])
-	    fi
-	    AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?])
-	    AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no)
-	    if test "$tcl_ok" = "no"; then
-		# Check a little harder for __pthread_mutex_init in the same
-		# library, as some systems hide it there until pthread.h is
-		# defined.  We could alternatively do an AC_TRY_COMPILE with
-		# pthread.h, but that will work with libpthread really doesn't
-		# exist, like AIX 4.2.  [Bug: 4359]
-		AC_CHECK_LIB(pthread, __pthread_mutex_init,
-		    tcl_ok=yes, tcl_ok=no)
-	    fi
-
-	    if test "$tcl_ok" = "yes"; then
-		# The space is needed
-		THREADS_LIBS=" -lpthread"
-	    else
-		AC_CHECK_LIB(pthreads, pthread_mutex_init,
-		    tcl_ok=yes, tcl_ok=no)
-		if test "$tcl_ok" = "yes"; then
-		    # The space is needed
-		    THREADS_LIBS=" -lpthreads"
-		else
-		    AC_CHECK_LIB(c, pthread_mutex_init,
-			tcl_ok=yes, tcl_ok=no)
-		    if test "$tcl_ok" = "no"; then
-			AC_CHECK_LIB(c_r, pthread_mutex_init,
-			    tcl_ok=yes, tcl_ok=no)
-			if test "$tcl_ok" = "yes"; then
-			    # The space is needed
-			    THREADS_LIBS=" -pthread"
-			else
-			    TCL_THREADS=0
-			    AC_MSG_WARN([Do not know how to find pthread lib on your system - thread support disabled])
-			fi
-		    fi
-		fi
-	    fi
-	fi
-    else
-	TCL_THREADS=0
-    fi
-    # Do checking message here to not mess up interleaved configure output
-    AC_MSG_CHECKING([for building with threads])
-    if test "${TCL_THREADS}" = 1; then
-	AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?])
-	AC_MSG_RESULT([yes (default)])
-    else
-	AC_MSG_RESULT([no])
-    fi
-    # TCL_THREADS sanity checking.  See if our request for building with
-    # threads is the same as the way Tcl was built.  If not, warn the user.
-    case ${TCL_DEFS} in
-	*THREADS=1*)
-	    if test "${TCL_THREADS}" = "0"; then
-		AC_MSG_WARN([
-    Building ${PACKAGE_NAME} without threads enabled, but building against Tcl
-    that IS thread-enabled.  It is recommended to use --enable-threads.])
-	    fi
-	    ;;
-	*)
-	    if test "${TCL_THREADS}" = "1"; then
-		AC_MSG_WARN([
-    --enable-threads requested, but building against a Tcl that is NOT
-    thread-enabled.  This is an OK configuration that will also run in
-    a thread-enabled core.])
-	    fi
-	    ;;
-    esac
-    AC_SUBST(TCL_THREADS)
-])
-
-#------------------------------------------------------------------------
-# TEA_ENABLE_SYMBOLS --
-#
-#	Specify if debugging symbols should be used.
-#	Memory (TCL_MEM_DEBUG) debugging can also be enabled.
-#
-# Arguments:
-#	none
-#
-#	TEA varies from core Tcl in that C|LDFLAGS_DEFAULT receives
-#	the value of C|LDFLAGS_OPTIMIZE|DEBUG already substituted.
-#	Requires the following vars to be set in the Makefile:
-#		CFLAGS_DEFAULT
-#		LDFLAGS_DEFAULT
-#
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--enable-symbols
-#
-#	Defines the following vars:
-#		CFLAGS_DEFAULT	Sets to $(CFLAGS_DEBUG) if true
-#				Sets to $(CFLAGS_OPTIMIZE) if false
-#		LDFLAGS_DEFAULT	Sets to $(LDFLAGS_DEBUG) if true
-#				Sets to $(LDFLAGS_OPTIMIZE) if false
-#		DBGX		Formerly used as debug library extension;
-#				always blank now.
-#
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_ENABLE_SYMBOLS], [
-    dnl TEA specific: Make sure we are initialized
-    AC_REQUIRE([TEA_CONFIG_CFLAGS])
-    AC_MSG_CHECKING([for build with symbols])
-    AC_ARG_ENABLE(symbols,
-	AC_HELP_STRING([--enable-symbols],
-	    [build with debugging symbols (default: off)]),
-	[tcl_ok=$enableval], [tcl_ok=no])
-    DBGX=""
-    if test "$tcl_ok" = "no"; then
-	CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}"
-	LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}"
-	AC_MSG_RESULT([no])
-    else
-	CFLAGS_DEFAULT="${CFLAGS_DEBUG}"
-	LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}"
-	if test "$tcl_ok" = "yes"; then
-	    AC_MSG_RESULT([yes (standard debugging)])
-	fi
-    fi
-    # TEA specific:
-    if test "${TEA_PLATFORM}" != "windows" ; then
-	LDFLAGS_DEFAULT="${LDFLAGS}"
-    fi
-    AC_SUBST(CFLAGS_DEFAULT)
-    AC_SUBST(LDFLAGS_DEFAULT)
-    AC_SUBST(TCL_DBGX)
-
-    if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then
-	AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?])
-    fi
-
-    if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then
-	if test "$tcl_ok" = "all"; then
-	    AC_MSG_RESULT([enabled symbols mem debugging])
-	else
-	    AC_MSG_RESULT([enabled $tcl_ok debugging])
-	fi
-    fi
-])
-
-#------------------------------------------------------------------------
-# TEA_ENABLE_LANGINFO --
-#
-#	Allows use of modern nl_langinfo check for better l10n.
-#	This is only relevant for Unix.
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--enable-langinfo=yes|no (default is yes)
-#
-#	Defines the following vars:
-#		HAVE_LANGINFO	Triggers use of nl_langinfo if defined.
-#
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_ENABLE_LANGINFO], [
-    AC_ARG_ENABLE(langinfo,
-	AC_HELP_STRING([--enable-langinfo],
-	    [use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic (default: on)]),
-	[langinfo_ok=$enableval], [langinfo_ok=yes])
-
-    HAVE_LANGINFO=0
-    if test "$langinfo_ok" = "yes"; then
-	AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no])
-    fi
-    AC_MSG_CHECKING([whether to use nl_langinfo])
-    if test "$langinfo_ok" = "yes"; then
-	AC_CACHE_VAL(tcl_cv_langinfo_h, [
-	    AC_TRY_COMPILE([#include <langinfo.h>], [nl_langinfo(CODESET);],
-		    [tcl_cv_langinfo_h=yes],[tcl_cv_langinfo_h=no])])
-	AC_MSG_RESULT([$tcl_cv_langinfo_h])
-	if test $tcl_cv_langinfo_h = yes; then
-	    AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?])
-	fi
-    else
-	AC_MSG_RESULT([$langinfo_ok])
-    fi
-])
-
-#--------------------------------------------------------------------
-# TEA_CONFIG_SYSTEM
-#
-#	Determine what the system is (some things cannot be easily checked
-#	on a feature-driven basis, alas). This can usually be done via the
-#	"uname" command.
-#
-# Arguments:
-#	none
-#
-# Results:
-#	Defines the following var:
-#
-#	system -	System/platform/version identification code.
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN([TEA_CONFIG_SYSTEM], [
-    AC_CACHE_CHECK([system version], tcl_cv_sys_version, [
-	# TEA specific:
-	if test "${TEA_PLATFORM}" = "windows" ; then
-	    tcl_cv_sys_version=windows
-	else
-	    tcl_cv_sys_version=`uname -s`-`uname -r`
-	    if test "$?" -ne 0 ; then
-		AC_MSG_WARN([can't find uname command])
-		tcl_cv_sys_version=unknown
-	    else
-		if test "`uname -s`" = "AIX" ; then
-		    tcl_cv_sys_version=AIX-`uname -v`.`uname -r`
-		fi
-	    fi
-	fi
-    ])
-    system=$tcl_cv_sys_version
-])
-
-#--------------------------------------------------------------------
-# TEA_CONFIG_CFLAGS
-#
-#	Try to determine the proper flags to pass to the compiler
-#	for building shared libraries and other such nonsense.
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Defines and substitutes the following vars:
-#
-#	DL_OBJS, DL_LIBS - removed for TEA, only needed by core.
-#       LDFLAGS -      Flags to pass to the compiler when linking object
-#                       files into an executable application binary such
-#                       as tclsh.
-#       LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib",
-#                       that tell the run-time dynamic linker where to look
-#                       for shared libraries such as libtcl.so.  Depends on
-#                       the variable LIB_RUNTIME_DIR in the Makefile. Could
-#                       be the same as CC_SEARCH_FLAGS if ${CC} is used to link.
-#       CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib",
-#                       that tell the run-time dynamic linker where to look
-#                       for shared libraries such as libtcl.so.  Depends on
-#                       the variable LIB_RUNTIME_DIR in the Makefile.
-#       SHLIB_CFLAGS -  Flags to pass to cc when compiling the components
-#                       of a shared library (may request position-independent
-#                       code, among other things).
-#       SHLIB_LD -      Base command to use for combining object files
-#                       into a shared library.
-#       SHLIB_LD_LIBS - Dependent libraries for the linker to scan when
-#                       creating shared libraries.  This symbol typically
-#                       goes at the end of the "ld" commands that build
-#                       shared libraries. The value of the symbol defaults to
-#                       "${LIBS}" if all of the dependent libraries should
-#                       be specified when creating a shared library.  If
-#                       dependent libraries should not be specified (as on
-#                       SunOS 4.x, where they cause the link to fail, or in
-#                       general if Tcl and Tk aren't themselves shared
-#                       libraries), then this symbol has an empty string
-#                       as its value.
-#       SHLIB_SUFFIX -  Suffix to use for the names of dynamically loadable
-#                       extensions.  An empty string means we don't know how
-#                       to use shared libraries on this platform.
-#       LIB_SUFFIX -    Specifies everything that comes after the "libfoo"
-#                       in a static or shared library name, using the $VERSION variable
-#                       to put the version in the right place.  This is used
-#                       by platforms that need non-standard library names.
-#                       Examples:  ${VERSION}.so.1.1 on NetBSD, since it needs
-#                       to have a version after the .so, and ${VERSION}.a
-#                       on AIX, since a shared library needs to have
-#                       a .a extension whereas shared objects for loadable
-#                       extensions have a .so extension.  Defaults to
-#                       ${VERSION}${SHLIB_SUFFIX}.
-#	CFLAGS_DEBUG -
-#			Flags used when running the compiler in debug mode
-#	CFLAGS_OPTIMIZE -
-#			Flags used when running the compiler in optimize mode
-#	CFLAGS -	Additional CFLAGS added as necessary (usually 64-bit)
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN([TEA_CONFIG_CFLAGS], [
-    dnl TEA specific: Make sure we are initialized
-    AC_REQUIRE([TEA_INIT])
-
-    # Step 0.a: Enable 64 bit support?
-
-    AC_MSG_CHECKING([if 64bit support is requested])
-    AC_ARG_ENABLE(64bit,
-	AC_HELP_STRING([--enable-64bit],
-	    [enable 64bit support (default: off)]),
-	[do64bit=$enableval], [do64bit=no])
-    AC_MSG_RESULT([$do64bit])
-
-    # Step 0.b: Enable Solaris 64 bit VIS support?
-
-    AC_MSG_CHECKING([if 64bit Sparc VIS support is requested])
-    AC_ARG_ENABLE(64bit-vis,
-	AC_HELP_STRING([--enable-64bit-vis],
-	    [enable 64bit Sparc VIS support (default: off)]),
-	[do64bitVIS=$enableval], [do64bitVIS=no])
-    AC_MSG_RESULT([$do64bitVIS])
-    # Force 64bit on with VIS
-    AS_IF([test "$do64bitVIS" = "yes"], [do64bit=yes])
-
-    # Step 0.c: Check if visibility support is available. Do this here so
-    # that platform specific alternatives can be used below if this fails.
-
-    AC_CACHE_CHECK([if compiler supports visibility "hidden"],
-	tcl_cv_cc_visibility_hidden, [
-	hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror"
-	AC_TRY_LINK([
-	    extern __attribute__((__visibility__("hidden"))) void f(void);
-	    void f(void) {}], [f();], tcl_cv_cc_visibility_hidden=yes,
-	    tcl_cv_cc_visibility_hidden=no)
-	CFLAGS=$hold_cflags])
-    AS_IF([test $tcl_cv_cc_visibility_hidden = yes], [
-	AC_DEFINE(MODULE_SCOPE,
-	    [extern __attribute__((__visibility__("hidden")))],
-	    [Compiler support for module scope symbols])
-    ])
-
-    # Step 0.d: Disable -rpath support?
-
-    AC_MSG_CHECKING([if rpath support is requested])
-    AC_ARG_ENABLE(rpath,
-	AC_HELP_STRING([--disable-rpath],
-	    [disable rpath support (default: on)]),
-	[doRpath=$enableval], [doRpath=yes])
-    AC_MSG_RESULT([$doRpath])
-
-    # TEA specific: Cross-compiling options for Windows/CE builds?
-
-    AS_IF([test "${TEA_PLATFORM}" = windows], [
-	AC_MSG_CHECKING([if Windows/CE build is requested])
-	AC_ARG_ENABLE(wince,
-	    AC_HELP_STRING([--enable-wince],
-		[enable Win/CE support (where applicable)]),
-	    [doWince=$enableval], [doWince=no])
-	AC_MSG_RESULT([$doWince])
-    ])
-
-    # Set the variable "system" to hold the name and version number
-    # for the system.
-
-    TEA_CONFIG_SYSTEM
-
-    # Require ranlib early so we can override it in special cases below.
-
-    AC_REQUIRE([AC_PROG_RANLIB])
-
-    # Set configuration options based on system name and version.
-    # This is similar to Tcl's unix/tcl.m4 except that we've added a
-    # "windows" case and removed some core-only vars.
-
-    do64bit_ok=no
-    # default to '{$LIBS}' and set to "" on per-platform necessary basis
-    SHLIB_LD_LIBS='${LIBS}'
-    # When ld needs options to work in 64-bit mode, put them in
-    # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load]
-    # is disabled by the user. [Bug 1016796]
-    LDFLAGS_ARCH=""
-    UNSHARED_LIB_SUFFIX=""
-    # TEA specific: use PACKAGE_VERSION instead of VERSION
-    TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`'
-    ECHO_VERSION='`echo ${PACKAGE_VERSION}`'
-    TCL_LIB_VERSIONS_OK=ok
-    CFLAGS_DEBUG=-g
-    CFLAGS_OPTIMIZE=-O
-    AS_IF([test "$GCC" = yes], [
-	# TEA specific:
-	CFLAGS_OPTIMIZE=-O2
-	CFLAGS_WARNING="-Wall"
-    ], [CFLAGS_WARNING=""])
-dnl FIXME: Replace AC_CHECK_PROG with AC_CHECK_TOOL once cross compiling is fixed.
-dnl AC_CHECK_TOOL(AR, ar)
-    AC_CHECK_PROG(AR, ar, ar)
-    STLIB_LD='${AR} cr'
-    LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH"
-    AS_IF([test "x$SHLIB_VERSION" = x],[SHLIB_VERSION="1.0"])
-    case $system in
-	# TEA specific:
-	windows)
-	    # This is a 2-stage check to make sure we have the 64-bit SDK
-	    # We have to know where the SDK is installed.
-	    # This magic is based on MS Platform SDK for Win2003 SP1 - hobbs
-	    # MACHINE is IX86 for LINK, but this is used by the manifest,
-	    # which requires x86|amd64|ia64.
-	    MACHINE="X86"
-	    if test "$do64bit" != "no" ; then
-		if test "x${MSSDK}x" = "xx" ; then
-		    MSSDK="C:/Progra~1/Microsoft Platform SDK"
-		fi
-		MSSDK=`echo "$MSSDK" | sed -e  's!\\\!/!g'`
-		PATH64=""
-		case "$do64bit" in
-		    amd64|x64|yes)
-			MACHINE="AMD64" ; # default to AMD64 64-bit build
-			PATH64="${MSSDK}/Bin/Win64/x86/AMD64"
-			;;
-		    ia64)
-			MACHINE="IA64"
-			PATH64="${MSSDK}/Bin/Win64"
-			;;
-		esac
-		if test ! -d "${PATH64}" ; then
-		    AC_MSG_WARN([Could not find 64-bit $MACHINE SDK to enable 64bit mode])
-		    AC_MSG_WARN([Ensure latest Platform SDK is installed])
-		    do64bit="no"
-		else
-		    AC_MSG_RESULT([   Using 64-bit $MACHINE mode])
-		    do64bit_ok="yes"
-		fi
-	    fi
-
-	    if test "$doWince" != "no" ; then
-		if test "$do64bit" != "no" ; then
-		    AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible])
-		fi
-		if test "$GCC" = "yes" ; then
-		    AC_MSG_ERROR([Windows/CE and GCC builds incompatible])
-		fi
-		TEA_PATH_CELIB
-		# Set defaults for common evc4/PPC2003 setup
-		# Currently Tcl requires 300+, possibly 420+ for sockets
-		CEVERSION=420; 		# could be 211 300 301 400 420 ...
-		TARGETCPU=ARMV4;	# could be ARMV4 ARM MIPS SH3 X86 ...
-		ARCH=ARM;		# could be ARM MIPS X86EM ...
-		PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002"
-		if test "$doWince" != "yes"; then
-		    # If !yes then the user specified something
-		    # Reset ARCH to allow user to skip specifying it
-		    ARCH=
-		    eval `echo $doWince | awk -F, '{ \
-	    if (length([$]1)) { printf "CEVERSION=\"%s\"\n", [$]1; \
-	    if ([$]1 < 400)   { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \
-	    if (length([$]2)) { printf "TARGETCPU=\"%s\"\n", toupper([$]2) }; \
-	    if (length([$]3)) { printf "ARCH=\"%s\"\n", toupper([$]3) }; \
-	    if (length([$]4)) { printf "PLATFORM=\"%s\"\n", [$]4 }; \
-		    }'`
-		    if test "x${ARCH}" = "x" ; then
-			ARCH=$TARGETCPU;
-		    fi
-		fi
-		OSVERSION=WCE$CEVERSION;
-	    	if test "x${WCEROOT}" = "x" ; then
-			WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0"
-		    if test ! -d "${WCEROOT}" ; then
-			WCEROOT="C:/Program Files/Microsoft eMbedded Tools"
-		    fi
-		fi
-		if test "x${SDKROOT}" = "x" ; then
-		    SDKROOT="C:/Program Files/Windows CE Tools"
-		    if test ! -d "${SDKROOT}" ; then
-			SDKROOT="C:/Windows CE Tools"
-		    fi
-		fi
-		WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'`
-		SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'`
-		if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \
-		    -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then
-		    AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]])
-		    doWince="no"
-		else
-		    # We could PATH_NOSPACE these, but that's not important,
-		    # as long as we quote them when used.
-		    CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include"
-		    if test -d "${CEINCLUDE}/${TARGETCPU}" ; then
-			CEINCLUDE="${CEINCLUDE}/${TARGETCPU}"
-		    fi
-		    CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}"
-    		fi
-	    fi
-
-	    if test "$GCC" != "yes" ; then
-	        if test "${SHARED_BUILD}" = "0" ; then
-		    runtime=-MT
-	        else
-		    runtime=-MD
-	        fi
-
-                if test "$do64bit" != "no" ; then
-		    # All this magic is necessary for the Win64 SDK RC1 - hobbs
-		    CC="\"${PATH64}/cl.exe\""
-		    CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\""
-		    RC="\"${MSSDK}/bin/rc.exe\""
-		    lflags="-nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\""
-		    LINKBIN="\"${PATH64}/link.exe\""
-		    CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d"
-		    CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}"
-		    # Avoid 'unresolved external symbol __security_cookie'
-		    # errors, c.f. http://support.microsoft.com/?id=894573
-		    TEA_ADD_LIBS([bufferoverflowU.lib])
-		elif test "$doWince" != "no" ; then
-		    CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin"
-		    if test "${TARGETCPU}" = "X86"; then
-			CC="\"${CEBINROOT}/cl.exe\""
-		    else
-			CC="\"${CEBINROOT}/cl${ARCH}.exe\""
-		    fi
-		    CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\""
-		    RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\""
-		    arch=`echo ${ARCH} | awk '{print tolower([$]0)}'`
-		    defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS"
-		    if test "${SHARED_BUILD}" = "1" ; then
-			# Static CE builds require static celib as well
-		    	defs="${defs} _DLL"
-		    fi
-		    for i in $defs ; do
-			AC_DEFINE_UNQUOTED($i, 1, [WinCE def ]$i)
-		    done
-		    AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION, [_WIN32_WCE version])
-		    AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION, [UNDER_CE version])
-		    CFLAGS_DEBUG="-nologo -Zi -Od"
-		    CFLAGS_OPTIMIZE="-nologo -Ox"
-		    lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'`
-		    lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo"
-		    LINKBIN="\"${CEBINROOT}/link.exe\""
-		    AC_SUBST(CELIB_DIR)
-		else
-		    RC="rc"
-		    lflags="-nologo"
-    		    LINKBIN="link"
-		    CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d"
-		    CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}"
-		fi
-	    fi
-
-	    if test "$GCC" = "yes"; then
-		# mingw gcc mode
-		RC="windres"
-		CFLAGS_DEBUG="-g"
-		CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer"
-		SHLIB_LD="$CC -shared"
-		UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
-		LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}"
-		LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}"
-	    else
-		SHLIB_LD="${LINKBIN} -dll ${lflags}"
-		# link -lib only works when -lib is the first arg
-		STLIB_LD="${LINKBIN} -lib ${lflags}"
-		UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib'
-		PATHTYPE=-w
-		# For information on what debugtype is most useful, see:
-		# http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp
-		# and also
-		# http://msdn2.microsoft.com/en-us/library/y0zzbyt4%28VS.80%29.aspx
-		# This essentially turns it all on.
-		LDFLAGS_DEBUG="-debug -debugtype:cv"
-		LDFLAGS_OPTIMIZE="-release"
-		if test "$doWince" != "no" ; then
-		    LDFLAGS_CONSOLE="-link ${lflags}"
-		    LDFLAGS_WINDOW=${LDFLAGS_CONSOLE}
-		else
-		    LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}"
-		    LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}"
-		fi
-	    fi
-
-	    SHLIB_SUFFIX=".dll"
-	    SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll'
-
-	    TCL_LIB_VERSIONS_OK=nodots
-    	    ;;
-	AIX-*)
-	    AS_IF([test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"], [
-		# AIX requires the _r compiler when gcc isn't being used
-		case "${CC}" in
-		    *_r|*_r\ *)
-			# ok ...
-			;;
-		    *)
-			# Make sure only first arg gets _r
-		    	CC=`echo "$CC" | sed -e 's/^\([[^ ]]*\)/\1_r/'`
-			;;
-		esac
-		AC_MSG_RESULT([Using $CC for compiling with threads])
-	    ])
-	    LIBS="$LIBS -lc"
-	    SHLIB_CFLAGS=""
-	    SHLIB_SUFFIX=".so"
-
-	    LD_LIBRARY_PATH_VAR="LIBPATH"
-
-	    # Check to enable 64-bit flags for compiler/linker
-	    AS_IF([test "$do64bit" = yes], [
-		AS_IF([test "$GCC" = yes], [
-		    AC_MSG_WARN([64bit mode not supported with GCC on $system])
-		], [
-		    do64bit_ok=yes
-		    CFLAGS="$CFLAGS -q64"
-		    LDFLAGS_ARCH="-q64"
-		    RANLIB="${RANLIB} -X64"
-		    AR="${AR} -X64"
-		    SHLIB_LD_FLAGS="-b64"
-		])
-	    ])
-
-	    AS_IF([test "`uname -m`" = ia64], [
-		# AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC
-		SHLIB_LD="/usr/ccs/bin/ld -G -z text"
-		AS_IF([test "$GCC" = yes], [
-		    CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
-		], [
-		    CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}'
-		])
-		LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
-	    ], [
-		AS_IF([test "$GCC" = yes], [
-		    SHLIB_LD='${CC} -shared -Wl,-bexpall'
-		], [
-		    SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bexpall -H512 -T512 -bnoentry"
-		    LDFLAGS="$LDFLAGS -brtl"
-		])
-		SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}"
-		CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
-		LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
-	    ])
-	    ;;
-	BeOS*)
-	    SHLIB_CFLAGS="-fPIC"
-	    SHLIB_LD='${CC} -nostart'
-	    SHLIB_SUFFIX=".so"
-
-	    #-----------------------------------------------------------
-	    # Check for inet_ntoa in -lbind, for BeOS (which also needs
-	    # -lsocket, even if the network functions are in -lnet which
-	    # is always linked to, for compatibility.
-	    #-----------------------------------------------------------
-	    AC_CHECK_LIB(bind, inet_ntoa, [LIBS="$LIBS -lbind -lsocket"])
-	    ;;
-	BSD/OS-4.*)
-	    SHLIB_CFLAGS="-export-dynamic -fPIC"
-	    SHLIB_LD='${CC} -shared'
-	    SHLIB_SUFFIX=".so"
-	    LDFLAGS="$LDFLAGS -export-dynamic"
-	    CC_SEARCH_FLAGS=""
-	    LD_SEARCH_FLAGS=""
-	    ;;
-	CYGWIN_*)
-	    SHLIB_CFLAGS=""
-	    SHLIB_LD='${CC} -shared'
-	    SHLIB_SUFFIX=".dll"
-	    EXE_SUFFIX=".exe"
-	    CC_SEARCH_FLAGS=""
-	    LD_SEARCH_FLAGS=""
-	    ;;
-	Haiku*)
-	    LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
-	    SHLIB_CFLAGS="-fPIC"
-	    SHLIB_SUFFIX=".so"
-	    SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS}'
-	    AC_CHECK_LIB(network, inet_ntoa, [LIBS="$LIBS -lnetwork"])
-	    ;;
-	HP-UX-*.11.*)
-	    # Use updated header definitions where possible
-	    AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?])
-	    # TEA specific: Needed by Tcl, but not most extensions
-	    #AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?])
-	    #LIBS="$LIBS -lxnet"               # Use the XOPEN network library
-
-	    AS_IF([test "`uname -m`" = ia64], [
-		SHLIB_SUFFIX=".so"
-		# Use newer C++ library for C++ extensions
-		#if test "$GCC" != "yes" ; then
-		#   CPPFLAGS="-AA"
-		#fi
-	    ], [
-		SHLIB_SUFFIX=".sl"
-	    ])
-	    AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no)
-	    AS_IF([test "$tcl_ok" = yes], [
-		LDFLAGS="$LDFLAGS -E"
-		CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.'
-		LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.'
-		LD_LIBRARY_PATH_VAR="SHLIB_PATH"
-	    ])
-	    AS_IF([test "$GCC" = yes], [
-		SHLIB_LD='${CC} -shared'
-		LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
-	    ], [
-		CFLAGS="$CFLAGS -z"
-		# Users may want PA-RISC 1.1/2.0 portable code - needs HP cc
-		#CFLAGS="$CFLAGS +DAportable"
-		SHLIB_CFLAGS="+z"
-		SHLIB_LD="ld -b"
-	    ])
-
-	    # Check to enable 64-bit flags for compiler/linker
-	    AS_IF([test "$do64bit" = "yes"], [
-		AS_IF([test "$GCC" = yes], [
-		    case `${CC} -dumpmachine` in
-			hppa64*)
-			    # 64-bit gcc in use.  Fix flags for GNU ld.
-			    do64bit_ok=yes
-			    SHLIB_LD='${CC} -shared'
-			    AS_IF([test $doRpath = yes], [
-				CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
-			    LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
-			    ;;
-			*)
-			    AC_MSG_WARN([64bit mode not supported with GCC on $system])
-			    ;;
-		    esac
-		], [
-		    do64bit_ok=yes
-		    CFLAGS="$CFLAGS +DD64"
-		    LDFLAGS_ARCH="+DD64"
-		])
-	    ]) ;;
-	IRIX-6.*)
-	    SHLIB_CFLAGS=""
-	    SHLIB_LD="ld -n32 -shared -rdata_shared"
-	    SHLIB_SUFFIX=".so"
-	    AS_IF([test $doRpath = yes], [
-		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
-		LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])
-	    AS_IF([test "$GCC" = yes], [
-		CFLAGS="$CFLAGS -mabi=n32"
-		LDFLAGS="$LDFLAGS -mabi=n32"
-	    ], [
-		case $system in
-		    IRIX-6.3)
-			# Use to build 6.2 compatible binaries on 6.3.
-			CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS"
-			;;
-		    *)
-			CFLAGS="$CFLAGS -n32"
-			;;
-		esac
-		LDFLAGS="$LDFLAGS -n32"
-	    ])
-	    ;;
-	IRIX64-6.*)
-	    SHLIB_CFLAGS=""
-	    SHLIB_LD="ld -n32 -shared -rdata_shared"
-	    SHLIB_SUFFIX=".so"
-	    AS_IF([test $doRpath = yes], [
-		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
-		LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])
-
-	    # Check to enable 64-bit flags for compiler/linker
-
-	    AS_IF([test "$do64bit" = yes], [
-	        AS_IF([test "$GCC" = yes], [
-	            AC_MSG_WARN([64bit mode not supported by gcc])
-	        ], [
-	            do64bit_ok=yes
-	            SHLIB_LD="ld -64 -shared -rdata_shared"
-	            CFLAGS="$CFLAGS -64"
-	            LDFLAGS_ARCH="-64"
-	        ])
-	    ])
-	    ;;
-	Linux*)
-	    SHLIB_CFLAGS="-fPIC"
-	    SHLIB_SUFFIX=".so"
-
-	    # TEA specific:
-	    CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer"
-
-	    # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS
-	    SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS_DEFAULT}'
-	    LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
-	    AS_IF([test $doRpath = yes], [
-		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
-	    LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
-	    AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"])
-	    AS_IF([test $do64bit = yes], [
-		AC_CACHE_CHECK([if compiler accepts -m64 flag], tcl_cv_cc_m64, [
-		    hold_cflags=$CFLAGS
-		    CFLAGS="$CFLAGS -m64"
-		    AC_TRY_LINK(,, tcl_cv_cc_m64=yes, tcl_cv_cc_m64=no)
-		    CFLAGS=$hold_cflags])
-		AS_IF([test $tcl_cv_cc_m64 = yes], [
-		    CFLAGS="$CFLAGS -m64"
-		    do64bit_ok=yes
-		])
-	   ])
-
-	    # The combo of gcc + glibc has a bug related to inlining of
-	    # functions like strtod(). The -fno-builtin flag should address
-	    # this problem but it does not work. The -fno-inline flag is kind
-	    # of overkill but it works. Disable inlining only when one of the
-	    # files in compat/*.c is being linked in.
-
-	    AS_IF([test x"${USE_COMPAT}" != x],[CFLAGS="$CFLAGS -fno-inline"])
-
-	    ;;
-	GNU*)
-	    SHLIB_CFLAGS="-fPIC"
-	    SHLIB_SUFFIX=".so"
-
-	    SHLIB_LD='${CC} -shared'
-	    LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
-	    CC_SEARCH_FLAGS=""
-	    LD_SEARCH_FLAGS=""
-	    AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"])
-	    ;;
-	Lynx*)
-	    SHLIB_CFLAGS="-fPIC"
-	    SHLIB_SUFFIX=".so"
-	    CFLAGS_OPTIMIZE=-02
-	    SHLIB_LD='${CC} -shared'
-	    LD_FLAGS="-Wl,--export-dynamic"
-	    AS_IF([test $doRpath = yes], [
-		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
-		LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
-	    ;;
-	OpenBSD-*)
-	    SHLIB_CFLAGS="-fPIC"
-	    SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}'
-	    SHLIB_SUFFIX=".so"
-	    AS_IF([test $doRpath = yes], [
-		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
-	    LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
-	    SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.${SHLIB_VERSION}'
-	    AC_CACHE_CHECK([for ELF], tcl_cv_ld_elf, [
-		AC_EGREP_CPP(yes, [
-#ifdef __ELF__
-	yes
-#endif
-		], tcl_cv_ld_elf=yes, tcl_cv_ld_elf=no)])
-	    AS_IF([test $tcl_cv_ld_elf = yes], [
-		LDFLAGS=-Wl,-export-dynamic
-	    ], [LDFLAGS=""])
-	    AS_IF([test "${TCL_THREADS}" = "1"], [
-		# OpenBSD builds and links with -pthread, never -lpthread.
-		LIBS=`echo $LIBS | sed s/-lpthread//`
-		CFLAGS="$CFLAGS -pthread"
-		SHLIB_CFLAGS="$SHLIB_CFLAGS -pthread"
-	    ])
-	    # OpenBSD doesn't do version numbers with dots.
-	    UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
-	    TCL_LIB_VERSIONS_OK=nodots
-	    ;;
-	NetBSD-*|FreeBSD-[[3-4]].*)
-	    # FreeBSD 3.* and greater have ELF.
-	    # NetBSD 2.* has ELF and can use 'cc -shared' to build shared libs
-	    SHLIB_CFLAGS="-fPIC"
-	    SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}'
-	    SHLIB_SUFFIX=".so"
-	    LDFLAGS="$LDFLAGS -export-dynamic"
-	    AS_IF([test $doRpath = yes], [
-		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
-	    LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
-	    AS_IF([test "${TCL_THREADS}" = "1"], [
-		# The -pthread needs to go in the CFLAGS, not LIBS
-		LIBS=`echo $LIBS | sed s/-pthread//`
-		CFLAGS="$CFLAGS -pthread"
-	    	LDFLAGS="$LDFLAGS -pthread"
-	    ])
-	    case $system in
-	    FreeBSD-3.*)
-	    	# FreeBSD-3 doesn't handle version numbers with dots.
-	    	UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
-	    	SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so'
-	    	TCL_LIB_VERSIONS_OK=nodots
-		;;
-	    esac
-	    ;;
-	FreeBSD-*)
-	    # This configuration from FreeBSD Ports.
-	    SHLIB_CFLAGS="-fPIC"
-	    SHLIB_LD="${CC} -shared"
-	    TCL_SHLIB_LD_EXTRAS="-soname \$[@]"
-	    SHLIB_SUFFIX=".so"
-	    LDFLAGS=""
-	    AS_IF([test $doRpath = yes], [
-		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
-		LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])
-	    AS_IF([test "${TCL_THREADS}" = "1"], [
-		# The -pthread needs to go in the LDFLAGS, not LIBS
-		LIBS=`echo $LIBS | sed s/-pthread//`
-		CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
-		LDFLAGS="$LDFLAGS $PTHREAD_LIBS"])
-	    # Version numbers are dot-stripped by system policy.
-	    TCL_TRIM_DOTS=`echo ${VERSION} | tr -d .`
-	    UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
-	    SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1'
-	    TCL_LIB_VERSIONS_OK=nodots
-	    ;;
-	Darwin-*)
-	    CFLAGS_OPTIMIZE="-Os"
-	    SHLIB_CFLAGS="-fno-common"
-	    # To avoid discrepancies between what headers configure sees during
-	    # preprocessing tests and compiling tests, move any -isysroot and
-	    # -mmacosx-version-min flags from CFLAGS to CPPFLAGS:
-	    CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \
-		awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \
-		if ([$]i~/^(isysroot|mmacosx-version-min)/) print "-"[$]i}'`"
-	    CFLAGS="`echo " ${CFLAGS}" | \
-		awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \
-		if (!([$]i~/^(isysroot|mmacosx-version-min)/)) print "-"[$]i}'`"
-	    AS_IF([test $do64bit = yes], [
-		case `arch` in
-		    ppc)
-			AC_CACHE_CHECK([if compiler accepts -arch ppc64 flag],
-				tcl_cv_cc_arch_ppc64, [
-			    hold_cflags=$CFLAGS
-			    CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5"
-			    AC_TRY_LINK(,, tcl_cv_cc_arch_ppc64=yes,
-				    tcl_cv_cc_arch_ppc64=no)
-			    CFLAGS=$hold_cflags])
-			AS_IF([test $tcl_cv_cc_arch_ppc64 = yes], [
-			    CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5"
-			    do64bit_ok=yes
-			]);;
-		    i386)
-			AC_CACHE_CHECK([if compiler accepts -arch x86_64 flag],
-				tcl_cv_cc_arch_x86_64, [
-			    hold_cflags=$CFLAGS
-			    CFLAGS="$CFLAGS -arch x86_64"
-			    AC_TRY_LINK(,, tcl_cv_cc_arch_x86_64=yes,
-				    tcl_cv_cc_arch_x86_64=no)
-			    CFLAGS=$hold_cflags])
-			AS_IF([test $tcl_cv_cc_arch_x86_64 = yes], [
-			    CFLAGS="$CFLAGS -arch x86_64"
-			    do64bit_ok=yes
-			]);;
-		    *)
-			AC_MSG_WARN([Don't know how enable 64-bit on architecture `arch`]);;
-		esac
-	    ], [
-		# Check for combined 32-bit and 64-bit fat build
-		AS_IF([echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \
-		    && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '], [
-		    fat_32_64=yes])
-	    ])
-	    # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS
-	    SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}'
-	    AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [
-		hold_ldflags=$LDFLAGS
-		LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module"
-		AC_TRY_LINK(, [int i;], tcl_cv_ld_single_module=yes, tcl_cv_ld_single_module=no)
-		LDFLAGS=$hold_ldflags])
-	    AS_IF([test $tcl_cv_ld_single_module = yes], [
-		SHLIB_LD="${SHLIB_LD} -Wl,-single_module"
-	    ])
-	    # TEA specific: link shlib with current and compatiblity version flags
-	    vers=`echo ${PACKAGE_VERSION} | sed -e 's/^\([[0-9]]\{1,5\}\)\(\(\.[[0-9]]\{1,3\}\)\{0,2\}\).*$/\1\2/p' -e d`
-	    SHLIB_LD="${SHLIB_LD} -current_version ${vers:-0} -compatibility_version ${vers:-0}"
-	    SHLIB_SUFFIX=".dylib"
-	    # Don't use -prebind when building for Mac OS X 10.4 or later only:
-	    AS_IF([test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int([$]2)}'`" -lt 4 -a \
-		"`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int([$]2)}'`" -lt 4], [
-		LDFLAGS="$LDFLAGS -prebind"])
-	    LDFLAGS="$LDFLAGS -headerpad_max_install_names"
-	    AC_CACHE_CHECK([if ld accepts -search_paths_first flag],
-		    tcl_cv_ld_search_paths_first, [
-		hold_ldflags=$LDFLAGS
-		LDFLAGS="$LDFLAGS -Wl,-search_paths_first"
-		AC_TRY_LINK(, [int i;], tcl_cv_ld_search_paths_first=yes,
-			tcl_cv_ld_search_paths_first=no)
-		LDFLAGS=$hold_ldflags])
-	    AS_IF([test $tcl_cv_ld_search_paths_first = yes], [
-		LDFLAGS="$LDFLAGS -Wl,-search_paths_first"
-	    ])
-	    AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [
-		AC_DEFINE(MODULE_SCOPE, [__private_extern__],
-		    [Compiler support for module scope symbols])
-		tcl_cv_cc_visibility_hidden=yes
-	    ])
-	    CC_SEARCH_FLAGS=""
-	    LD_SEARCH_FLAGS=""
-	    LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH"
-	    # TEA specific: for combined 32 & 64 bit fat builds of Tk
-	    # extensions, verify that 64-bit build is possible.
-	    AS_IF([test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}"], [
-		AS_IF([test "${TEA_WINDOWINGSYSTEM}" = x11], [
-		    AC_CACHE_CHECK([for 64-bit X11], tcl_cv_lib_x11_64, [
-			for v in CFLAGS CPPFLAGS LDFLAGS; do
-			    eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"'
-			done
-			CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include"
-			LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11"
-			AC_TRY_LINK([#include <X11/Xlib.h>], [XrmInitialize();],
-			    tcl_cv_lib_x11_64=yes, tcl_cv_lib_x11_64=no)
-			for v in CFLAGS CPPFLAGS LDFLAGS; do
-			    eval $v'="$hold_'$v'"'
-			done])
-		])
-		AS_IF([test "${TEA_WINDOWINGSYSTEM}" = aqua], [
-		    AC_CACHE_CHECK([for 64-bit Tk], tcl_cv_lib_tk_64, [
-			for v in CFLAGS CPPFLAGS LDFLAGS; do
-			    eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"'
-			done
-			CPPFLAGS="$CPPFLAGS -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 ${TCL_INCLUDES} ${TK_INCLUDES}"
-			LDFLAGS="$LDFLAGS ${TCL_STUB_LIB_SPEC} ${TK_STUB_LIB_SPEC}"
-			AC_TRY_LINK([#include <tk.h>], [Tk_InitStubs(NULL, "", 0);],
-			    tcl_cv_lib_tk_64=yes, tcl_cv_lib_tk_64=no)
-			for v in CFLAGS CPPFLAGS LDFLAGS; do
-			    eval $v'="$hold_'$v'"'
-			done])
-		])
-		# remove 64-bit arch flags from CFLAGS et al. if configuration
-		# does not support 64-bit.
-		AS_IF([test "$tcl_cv_lib_tk_64" = no -o "$tcl_cv_lib_x11_64" = no], [
-		    AC_MSG_NOTICE([Removing 64-bit architectures from compiler & linker flags])
-		    for v in CFLAGS CPPFLAGS LDFLAGS; do
-			eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"'
-		    done])
-	    ])
-	    ;;
-	OS/390-*)
-	    CFLAGS_OPTIMIZE=""		# Optimizer is buggy
-	    AC_DEFINE(_OE_SOCKETS, 1,	# needed in sys/socket.h
-		[Should OS/390 do the right thing with sockets?])
-	    ;;
-	OSF1-V*)
-	    # Digital OSF/1
-	    SHLIB_CFLAGS=""
-	    AS_IF([test "$SHARED_BUILD" = 1], [
-	        SHLIB_LD='ld -shared -expect_unresolved "*"'
-	    ], [
-	        SHLIB_LD='ld -non_shared -expect_unresolved "*"'
-	    ])
-	    SHLIB_SUFFIX=".so"
-	    AS_IF([test $doRpath = yes], [
-		CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
-		LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])
-	    AS_IF([test "$GCC" = yes], [CFLAGS="$CFLAGS -mieee"], [
-		CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee"])
-	    # see pthread_intro(3) for pthread support on osf1, k.furukawa
-	    AS_IF([test "${TCL_THREADS}" = 1], [
-		CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE"
-		CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64"
-		LIBS=`echo $LIBS | sed s/-lpthreads//`
-		AS_IF([test "$GCC" = yes], [
-		    LIBS="$LIBS -lpthread -lmach -lexc"
-		], [
-		    CFLAGS="$CFLAGS -pthread"
-		    LDFLAGS="$LDFLAGS -pthread"
-		])
-	    ])
-	    ;;
-	QNX-6*)
-	    # QNX RTP
-	    # This may work for all QNX, but it was only reported for v6.
-	    SHLIB_CFLAGS="-fPIC"
-	    SHLIB_LD="ld -Bshareable -x"
-	    SHLIB_LD_LIBS=""
-	    SHLIB_SUFFIX=".so"
-	    CC_SEARCH_FLAGS=""
-	    LD_SEARCH_FLAGS=""
-	    ;;
-	SCO_SV-3.2*)
-	    AS_IF([test "$GCC" = yes], [
-		SHLIB_CFLAGS="-fPIC -melf"
-		LDFLAGS="$LDFLAGS -melf -Wl,-Bexport"
-	    ], [
-	       SHLIB_CFLAGS="-Kpic -belf"
-	       LDFLAGS="$LDFLAGS -belf -Wl,-Bexport"
-	    ])
-	    SHLIB_LD="ld -G"
-	    SHLIB_LD_LIBS=""
-	    SHLIB_SUFFIX=".so"
-	    CC_SEARCH_FLAGS=""
-	    LD_SEARCH_FLAGS=""
-	    ;;
-	SunOS-5.[[0-6]])
-	    # Careful to not let 5.10+ fall into this case
-
-	    # Note: If _REENTRANT isn't defined, then Solaris
-	    # won't define thread-safe library routines.
-
-	    AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
-	    AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
-		[Do we really want to follow the standard? Yes we do!])
-
-	    SHLIB_CFLAGS="-KPIC"
-	    SHLIB_SUFFIX=".so"
-	    AS_IF([test "$GCC" = yes], [
-		SHLIB_LD='${CC} -shared'
-		CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
-		LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
-	    ], [
-		SHLIB_LD="/usr/ccs/bin/ld -G -z text"
-		CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
-		LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
-	    ])
-	    ;;
-	SunOS-5*)
-	    # Note: If _REENTRANT isn't defined, then Solaris
-	    # won't define thread-safe library routines.
-
-	    AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
-	    AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
-		[Do we really want to follow the standard? Yes we do!])
-
-	    SHLIB_CFLAGS="-KPIC"
-
-	    # Check to enable 64-bit flags for compiler/linker
-	    AS_IF([test "$do64bit" = yes], [
-		arch=`isainfo`
-		AS_IF([test "$arch" = "sparcv9 sparc"], [
-		    AS_IF([test "$GCC" = yes], [
-			AS_IF([test "`${CC} -dumpversion | awk -F. '{print [$]1}'`" -lt 3], [
-			    AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system])
-			], [
-			    do64bit_ok=yes
-			    CFLAGS="$CFLAGS -m64 -mcpu=v9"
-			    LDFLAGS="$LDFLAGS -m64 -mcpu=v9"
-			    SHLIB_CFLAGS="-fPIC"
-			])
-		    ], [
-			do64bit_ok=yes
-			AS_IF([test "$do64bitVIS" = yes], [
-			    CFLAGS="$CFLAGS -xarch=v9a"
-			    LDFLAGS_ARCH="-xarch=v9a"
-			], [
-			    CFLAGS="$CFLAGS -xarch=v9"
-			    LDFLAGS_ARCH="-xarch=v9"
-			])
-			# Solaris 64 uses this as well
-			#LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64"
-		    ])
-		], [AS_IF([test "$arch" = "amd64 i386"], [
-		    AS_IF([test "$GCC" = yes], [
-			case $system in
-			    SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*)
-				do64bit_ok=yes
-				CFLAGS="$CFLAGS -m64"
-				LDFLAGS="$LDFLAGS -m64";;
-			    *)
-				AC_MSG_WARN([64bit mode not supported with GCC on $system]);;
-			esac
-		    ], [
-			do64bit_ok=yes
-			case $system in
-			    SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*)
-				CFLAGS="$CFLAGS -m64"
-				LDFLAGS="$LDFLAGS -m64";;
-			    *)
-				CFLAGS="$CFLAGS -xarch=amd64"
-				LDFLAGS="$LDFLAGS -xarch=amd64";;
-			esac
-		    ])
-		], [AC_MSG_WARN([64bit mode not supported for $arch])])])
-	    ])
-
-	    SHLIB_SUFFIX=".so"
-	    AS_IF([test "$GCC" = yes], [
-		SHLIB_LD='${CC} -shared'
-		CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
-		LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
-		AS_IF([test "$do64bit_ok" = yes], [
-		    AS_IF([test "$arch" = "sparcv9 sparc"], [
-			# We need to specify -static-libgcc or we need to
-			# add the path to the sparv9 libgcc.
-			# JH: static-libgcc is necessary for core Tcl, but may
-			# not be necessary for extensions.
-			SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc"
-			# for finding sparcv9 libgcc, get the regular libgcc
-			# path, remove so name and append 'sparcv9'
-			#v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..."
-			#CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir"
-		    ], [AS_IF([test "$arch" = "amd64 i386"], [
-			# JH: static-libgcc is necessary for core Tcl, but may
-			# not be necessary for extensions.
-			SHLIB_LD="$SHLIB_LD -m64 -static-libgcc"
-		    ])])
-		])
-	    ], [
-		case $system in
-		    SunOS-5.[[1-9]][[0-9]]*)
-			# TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS
-			SHLIB_LD='${CC} -G -z text ${LDFLAGS_DEFAULT}';;
-		    *)
-			SHLIB_LD='/usr/ccs/bin/ld -G -z text';;
-		esac
-		CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
-		LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
-	    ])
-	    ;;
-    esac
-
-    AS_IF([test "$do64bit" = yes -a "$do64bit_ok" = no], [
-	AC_MSG_WARN([64bit support being disabled -- don't know magic for this platform])
-    ])
-
-dnl # Add any CPPFLAGS set in the environment to our CFLAGS, but delay doing so
-dnl # until the end of configure, as configure's compile and link tests use
-dnl # both CPPFLAGS and CFLAGS (unlike our compile and link) but configure's
-dnl # preprocessing tests use only CPPFLAGS.
-    AC_CONFIG_COMMANDS_PRE([CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS=""])
-
-    # Add in the arch flags late to ensure it wasn't removed.
-    # Not necessary in TEA, but this is aligned with core
-    LDFLAGS="$LDFLAGS $LDFLAGS_ARCH"
-
-    # If we're running gcc, then change the C flags for compiling shared
-    # libraries to the right flags for gcc, instead of those for the
-    # standard manufacturer compiler.
-
-    AS_IF([test "$GCC" = yes], [
-	case $system in
-	    AIX-*) ;;
-	    BSD/OS*) ;;
-	    CYGWIN_*) ;;
-	    IRIX*) ;;
-	    NetBSD-*|FreeBSD-*|OpenBSD-*) ;;
-	    Darwin-*) ;;
-	    SCO_SV-3.2*) ;;
-	    windows) ;;
-	    *) SHLIB_CFLAGS="-fPIC" ;;
-	esac])
-
-    AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [
-	AC_DEFINE(MODULE_SCOPE, [extern],
-	    [No Compiler support for module scope symbols])
-	AC_DEFINE(NO_VIZ)
-    ])
-
-    AS_IF([test "$SHARED_LIB_SUFFIX" = ""], [
-	# TEA specific: use PACKAGE_VERSION instead of VERSION
-	SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}'])
-    AS_IF([test "$UNSHARED_LIB_SUFFIX" = ""], [
-	# TEA specific: use PACKAGE_VERSION instead of VERSION
-	UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a'])
-
-    AC_SUBST(CFLAGS_DEBUG)
-    AC_SUBST(CFLAGS_OPTIMIZE)
-    AC_SUBST(CFLAGS_WARNING)
-
-    AC_SUBST(STLIB_LD)
-    AC_SUBST(SHLIB_LD)
-
-    AC_SUBST(SHLIB_LD_LIBS)
-    AC_SUBST(SHLIB_CFLAGS)
-
-    AC_SUBST(LD_LIBRARY_PATH_VAR)
-
-    # These must be called after we do the basic CFLAGS checks and
-    # verify any possible 64-bit or similar switches are necessary
-    TEA_TCL_EARLY_FLAGS
-    TEA_TCL_64BIT_FLAGS
-])
-
-#--------------------------------------------------------------------
-# TEA_SERIAL_PORT
-#
-#	Determine which interface to use to talk to the serial port.
-#	Note that #include lines must begin in leftmost column for
-#	some compilers to recognize them as preprocessor directives,
-#	and some build environments have stdin not pointing at a
-#	pseudo-terminal (usually /dev/null instead.)
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Defines only one of the following vars:
-#		HAVE_SYS_MODEM_H
-#		USE_TERMIOS
-#		USE_TERMIO
-#		USE_SGTTY
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN([TEA_SERIAL_PORT], [
-    AC_CHECK_HEADERS(sys/modem.h)
-    AC_CACHE_CHECK([termios vs. termio vs. sgtty], tcl_cv_api_serial, [
-    AC_TRY_RUN([
-#include <termios.h>
-
-int main() {
-    struct termios t;
-    if (tcgetattr(0, &t) == 0) {
-	cfsetospeed(&t, 0);
-	t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB;
-	return 0;
-    }
-    return 1;
-}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
-    if test $tcl_cv_api_serial = no ; then
-	AC_TRY_RUN([
-#include <termio.h>
-
-int main() {
-    struct termio t;
-    if (ioctl(0, TCGETA, &t) == 0) {
-	t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB;
-	return 0;
-    }
-    return 1;
-}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
-    fi
-    if test $tcl_cv_api_serial = no ; then
-	AC_TRY_RUN([
-#include <sgtty.h>
-
-int main() {
-    struct sgttyb t;
-    if (ioctl(0, TIOCGETP, &t) == 0) {
-	t.sg_ospeed = 0;
-	t.sg_flags |= ODDP | EVENP | RAW;
-	return 0;
-    }
-    return 1;
-}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
-    fi
-    if test $tcl_cv_api_serial = no ; then
-	AC_TRY_RUN([
-#include <termios.h>
-#include <errno.h>
-
-int main() {
-    struct termios t;
-    if (tcgetattr(0, &t) == 0
-	|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
-	cfsetospeed(&t, 0);
-	t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB;
-	return 0;
-    }
-    return 1;
-}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
-    fi
-    if test $tcl_cv_api_serial = no; then
-	AC_TRY_RUN([
-#include <termio.h>
-#include <errno.h>
-
-int main() {
-    struct termio t;
-    if (ioctl(0, TCGETA, &t) == 0
-	|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
-	t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB;
-	return 0;
-    }
-    return 1;
-    }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
-    fi
-    if test $tcl_cv_api_serial = no; then
-	AC_TRY_RUN([
-#include <sgtty.h>
-#include <errno.h>
-
-int main() {
-    struct sgttyb t;
-    if (ioctl(0, TIOCGETP, &t) == 0
-	|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
-	t.sg_ospeed = 0;
-	t.sg_flags |= ODDP | EVENP | RAW;
-	return 0;
-    }
-    return 1;
-}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none)
-    fi])
-    case $tcl_cv_api_serial in
-	termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);;
-	termio)  AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);;
-	sgtty)   AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);;
-    esac
-])
-
-#--------------------------------------------------------------------
-# TEA_MISSING_POSIX_HEADERS
-#
-#	Supply substitutes for missing POSIX header files.  Special
-#	notes:
-#	    - stdlib.h doesn't define strtol, strtoul, or
-#	      strtod in some versions of SunOS
-#	    - some versions of string.h don't declare procedures such
-#	      as strstr
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Defines some of the following vars:
-#		NO_DIRENT_H
-#		NO_ERRNO_H
-#		NO_VALUES_H
-#		HAVE_LIMITS_H or NO_LIMITS_H
-#		NO_STDLIB_H
-#		NO_STRING_H
-#		NO_SYS_WAIT_H
-#		NO_DLFCN_H
-#		HAVE_SYS_PARAM_H
-#
-#		HAVE_STRING_H ?
-#
-# tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and
-# CHECK on limits.h
-#--------------------------------------------------------------------
-
-AC_DEFUN([TEA_MISSING_POSIX_HEADERS], [
-    AC_CACHE_CHECK([dirent.h], tcl_cv_dirent_h, [
-    AC_TRY_LINK([#include <sys/types.h>
-#include <dirent.h>], [
-#ifndef _POSIX_SOURCE
-#   ifdef __Lynx__
-	/*
-	 * Generate compilation error to make the test fail:  Lynx headers
-	 * are only valid if really in the POSIX environment.
-	 */
-
-	missing_procedure();
-#   endif
-#endif
-DIR *d;
-struct dirent *entryPtr;
-char *p;
-d = opendir("foobar");
-entryPtr = readdir(d);
-p = entryPtr->d_name;
-closedir(d);
-], tcl_cv_dirent_h=yes, tcl_cv_dirent_h=no)])
-
-    if test $tcl_cv_dirent_h = no; then
-	AC_DEFINE(NO_DIRENT_H, 1, [Do we have <dirent.h>?])
-    fi
-
-    # TEA specific:
-    AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H, 1, [Do we have <errno.h>?])])
-    AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H, 1, [Do we have <float.h>?])])
-    AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H, 1, [Do we have <values.h>?])])
-    AC_CHECK_HEADER(limits.h,
-	[AC_DEFINE(HAVE_LIMITS_H, 1, [Do we have <limits.h>?])],
-	[AC_DEFINE(NO_LIMITS_H, 1, [Do we have <limits.h>?])])
-    AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0)
-    AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0)
-    AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0)
-    AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0)
-    if test $tcl_ok = 0; then
-	AC_DEFINE(NO_STDLIB_H, 1, [Do we have <stdlib.h>?])
-    fi
-    AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0)
-    AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0)
-    AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0)
-
-    # See also memmove check below for a place where NO_STRING_H can be
-    # set and why.
-
-    if test $tcl_ok = 0; then
-	AC_DEFINE(NO_STRING_H, 1, [Do we have <string.h>?])
-    fi
-
-    AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H, 1, [Do we have <sys/wait.h>?])])
-    AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H, 1, [Do we have <dlfcn.h>?])])
-
-    # OS/390 lacks sys/param.h (and doesn't need it, by chance).
-    AC_HAVE_HEADERS(sys/param.h)
-])
-
-#--------------------------------------------------------------------
-# TEA_PATH_X
-#
-#	Locate the X11 header files and the X11 library archive.  Try
-#	the ac_path_x macro first, but if it doesn't find the X stuff
-#	(e.g. because there's no xmkmf program) then check through
-#	a list of possible directories.  Under some conditions the
-#	autoconf macro will return an include directory that contains
-#	no include files, so double-check its result just to be safe.
-#
-#	This should be called after TEA_CONFIG_CFLAGS as setting the
-#	LIBS line can confuse some configure macro magic.
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Sets the following vars:
-#		XINCLUDES
-#		XLIBSW
-#		PKG_LIBS (appends to)
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN([TEA_PATH_X], [
-    if test "${TEA_WINDOWINGSYSTEM}" = "x11" ; then
-	TEA_PATH_UNIX_X
-    fi
-])
-
-AC_DEFUN([TEA_PATH_UNIX_X], [
-    AC_PATH_X
-    not_really_there=""
-    if test "$no_x" = ""; then
-	if test "$x_includes" = ""; then
-	    AC_TRY_CPP([#include <X11/XIntrinsic.h>], , not_really_there="yes")
-	else
-	    if test ! -r $x_includes/X11/Intrinsic.h; then
-		not_really_there="yes"
-	    fi
-	fi
-    fi
-    if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then
-	AC_MSG_CHECKING([for X11 header files])
-	found_xincludes="no"
-	AC_TRY_CPP([#include <X11/Intrinsic.h>], found_xincludes="yes", found_xincludes="no")
-	if test "$found_xincludes" = "no"; then
-	    dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include"
-	    for i in $dirs ; do
-		if test -r $i/X11/Intrinsic.h; then
-		    AC_MSG_RESULT([$i])
-		    XINCLUDES=" -I$i"
-		    found_xincludes="yes"
-		    break
-		fi
-	    done
-	fi
-    else
-	if test "$x_includes" != ""; then
-	    XINCLUDES="-I$x_includes"
-	    found_xincludes="yes"
-	fi
-    fi
-    if test "$found_xincludes" = "no"; then
-	AC_MSG_RESULT([couldn't find any!])
-    fi
-
-    if test "$no_x" = yes; then
-	AC_MSG_CHECKING([for X11 libraries])
-	XLIBSW=nope
-	dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib"
-	for i in $dirs ; do
-	    if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl -o -r $i/libX11.dylib; then
-		AC_MSG_RESULT([$i])
-		XLIBSW="-L$i -lX11"
-		x_libraries="$i"
-		break
-	    fi
-	done
-    else
-	if test "$x_libraries" = ""; then
-	    XLIBSW=-lX11
-	else
-	    XLIBSW="-L$x_libraries -lX11"
-	fi
-    fi
-    if test "$XLIBSW" = nope ; then
-	AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow)
-    fi
-    if test "$XLIBSW" = nope ; then
-	AC_MSG_RESULT([could not find any!  Using -lX11.])
-	XLIBSW=-lX11
-    fi
-    # TEA specific:
-    if test x"${XLIBSW}" != x ; then
-	PKG_LIBS="${PKG_LIBS} ${XLIBSW}"
-    fi
-])
-
-#--------------------------------------------------------------------
-# TEA_BLOCKING_STYLE
-#
-#	The statements below check for systems where POSIX-style
-#	non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented.
-#	On these systems (mostly older ones), use the old BSD-style
-#	FIONBIO approach instead.
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Defines some of the following vars:
-#		HAVE_SYS_IOCTL_H
-#		HAVE_SYS_FILIO_H
-#		USE_FIONBIO
-#		O_NONBLOCK
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN([TEA_BLOCKING_STYLE], [
-    AC_CHECK_HEADERS(sys/ioctl.h)
-    AC_CHECK_HEADERS(sys/filio.h)
-    TEA_CONFIG_SYSTEM
-    AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O])
-    case $system in
-	OSF*)
-	    AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?])
-	    AC_MSG_RESULT([FIONBIO])
-	    ;;
-	*)
-	    AC_MSG_RESULT([O_NONBLOCK])
-	    ;;
-    esac
-])
-
-#--------------------------------------------------------------------
-# TEA_TIME_HANDLER
-#
-#	Checks how the system deals with time.h, what time structures
-#	are used on the system, and what fields the structures have.
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Defines some of the following vars:
-#		USE_DELTA_FOR_TZ
-#		HAVE_TM_GMTOFF
-#		HAVE_TM_TZADJ
-#		HAVE_TIMEZONE_VAR
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN([TEA_TIME_HANDLER], [
-    AC_CHECK_HEADERS(sys/time.h)
-    AC_HEADER_TIME
-    AC_STRUCT_TIMEZONE
-
-    AC_CHECK_FUNCS(gmtime_r localtime_r)
-
-    AC_CACHE_CHECK([tm_tzadj in struct tm], tcl_cv_member_tm_tzadj, [
-	AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_tzadj;],
-	    tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)])
-    if test $tcl_cv_member_tm_tzadj = yes ; then
-	AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?])
-    fi
-
-    AC_CACHE_CHECK([tm_gmtoff in struct tm], tcl_cv_member_tm_gmtoff, [
-	AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_gmtoff;],
-	    tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)])
-    if test $tcl_cv_member_tm_gmtoff = yes ; then
-	AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?])
-    fi
-
-    #
-    # Its important to include time.h in this check, as some systems
-    # (like convex) have timezone functions, etc.
-    #
-    AC_CACHE_CHECK([long timezone variable], tcl_cv_timezone_long, [
-	AC_TRY_COMPILE([#include <time.h>],
-	    [extern long timezone;
-	    timezone += 1;
-	    exit (0);],
-	    tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)])
-    if test $tcl_cv_timezone_long = yes ; then
-	AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?])
-    else
-	#
-	# On some systems (eg IRIX 6.2), timezone is a time_t and not a long.
-	#
-	AC_CACHE_CHECK([time_t timezone variable], tcl_cv_timezone_time, [
-	    AC_TRY_COMPILE([#include <time.h>],
-		[extern time_t timezone;
-		timezone += 1;
-		exit (0);],
-		tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)])
-	if test $tcl_cv_timezone_time = yes ; then
-	    AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?])
-	fi
-    fi
-])
-
-#--------------------------------------------------------------------
-# TEA_BUGGY_STRTOD
-#
-#	Under Solaris 2.4, strtod returns the wrong value for the
-#	terminating character under some conditions.  Check for this
-#	and if the problem exists use a substitute procedure
-#	"fixstrtod" (provided by Tcl) that corrects the error.
-#	Also, on Compaq's Tru64 Unix 5.0,
-#	strtod(" ") returns 0.0 instead of a failure to convert.
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Might defines some of the following vars:
-#		strtod (=fixstrtod)
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN([TEA_BUGGY_STRTOD], [
-    AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0)
-    if test "$tcl_strtod" = 1; then
-	AC_CACHE_CHECK([for Solaris2.4/Tru64 strtod bugs], tcl_cv_strtod_buggy,[
-	    AC_TRY_RUN([
-		extern double strtod();
-		int main() {
-		    char *infString="Inf", *nanString="NaN", *spaceString=" ";
-		    char *term;
-		    double value;
-		    value = strtod(infString, &term);
-		    if ((term != infString) && (term[-1] == 0)) {
-			exit(1);
-		    }
-		    value = strtod(nanString, &term);
-		    if ((term != nanString) && (term[-1] == 0)) {
-			exit(1);
-		    }
-		    value = strtod(spaceString, &term);
-		    if (term == (spaceString+1)) {
-			exit(1);
-		    }
-		    exit(0);
-		}], tcl_cv_strtod_buggy=ok, tcl_cv_strtod_buggy=buggy,
-		    tcl_cv_strtod_buggy=buggy)])
-	if test "$tcl_cv_strtod_buggy" = buggy; then
-	    AC_LIBOBJ([fixstrtod])
-	    USE_COMPAT=1
-	    AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?])
-	fi
-    fi
-])
-
-#--------------------------------------------------------------------
-# TEA_TCL_LINK_LIBS
-#
-#	Search for the libraries needed to link the Tcl shell.
-#	Things like the math library (-lm) and socket stuff (-lsocket vs.
-#	-lnsl) are dealt with here.
-#
-# Arguments:
-#	Requires the following vars to be set in the Makefile:
-#		DL_LIBS (not in TEA, only needed in core)
-#		LIBS
-#		MATH_LIBS
-#
-# Results:
-#
-#	Subst's the following var:
-#		TCL_LIBS
-#		MATH_LIBS
-#
-#	Might append to the following vars:
-#		LIBS
-#
-#	Might define the following vars:
-#		HAVE_NET_ERRNO_H
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN([TEA_TCL_LINK_LIBS], [
-    #--------------------------------------------------------------------
-    # On a few very rare systems, all of the libm.a stuff is
-    # already in libc.a.  Set compiler flags accordingly.
-    # Also, Linux requires the "ieee" library for math to work
-    # right (and it must appear before "-lm").
-    #--------------------------------------------------------------------
-
-    AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm")
-    AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"])
-
-    #--------------------------------------------------------------------
-    # Interactive UNIX requires -linet instead of -lsocket, plus it
-    # needs net/errno.h to define the socket-related error codes.
-    #--------------------------------------------------------------------
-
-    AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"])
-    AC_CHECK_HEADER(net/errno.h, [
-	AC_DEFINE(HAVE_NET_ERRNO_H, 1, [Do we have <net/errno.h>?])])
-
-    #--------------------------------------------------------------------
-    #	Check for the existence of the -lsocket and -lnsl libraries.
-    #	The order here is important, so that they end up in the right
-    #	order in the command line generated by make.  Here are some
-    #	special considerations:
-    #	1. Use "connect" and "accept" to check for -lsocket, and
-    #	   "gethostbyname" to check for -lnsl.
-    #	2. Use each function name only once:  can't redo a check because
-    #	   autoconf caches the results of the last check and won't redo it.
-    #	3. Use -lnsl and -lsocket only if they supply procedures that
-    #	   aren't already present in the normal libraries.  This is because
-    #	   IRIX 5.2 has libraries, but they aren't needed and they're
-    #	   bogus:  they goof up name resolution if used.
-    #	4. On some SVR4 systems, can't use -lsocket without -lnsl too.
-    #	   To get around this problem, check for both libraries together
-    #	   if -lsocket doesn't work by itself.
-    #--------------------------------------------------------------------
-
-    tcl_checkBoth=0
-    AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1)
-    if test "$tcl_checkSocket" = 1; then
-	AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt,
-	    LIBS="$LIBS -lsocket", tcl_checkBoth=1)])
-    fi
-    if test "$tcl_checkBoth" = 1; then
-	tk_oldLibs=$LIBS
-	LIBS="$LIBS -lsocket -lnsl"
-	AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs])
-    fi
-    AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname,
-	    [LIBS="$LIBS -lnsl"])])
-
-    # TEA specific: Don't perform the eval of the libraries here because
-    # DL_LIBS won't be set until we call TEA_CONFIG_CFLAGS
-
-    TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}'
-    AC_SUBST(TCL_LIBS)
-    AC_SUBST(MATH_LIBS)
-])
-
-#--------------------------------------------------------------------
-# TEA_TCL_EARLY_FLAGS
-#
-#	Check for what flags are needed to be passed so the correct OS
-#	features are available.
-#
-# Arguments:
-#	None
-#
-# Results:
-#
-#	Might define the following vars:
-#		_ISOC99_SOURCE
-#		_LARGEFILE64_SOURCE
-#		_LARGEFILE_SOURCE64
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN([TEA_TCL_EARLY_FLAG],[
-    AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]),
-	AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no,
-	    AC_TRY_COMPILE([[#define ]$1[ 1
-]$2], $3,
-		[tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes,
-		[tcl_cv_flag_]translit($1,[A-Z],[a-z])=no)))
-    if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then
-	AC_DEFINE($1, 1, [Add the ]$1[ flag when building])
-	tcl_flags="$tcl_flags $1"
-    fi
-])
-
-AC_DEFUN([TEA_TCL_EARLY_FLAGS],[
-    AC_MSG_CHECKING([for required early compiler flags])
-    tcl_flags=""
-    TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include <stdlib.h>],
-	[char *p = (char *)strtoll; char *q = (char *)strtoull;])
-    TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include <sys/stat.h>],
-	[struct stat64 buf; int i = stat64("/", &buf);])
-    TEA_TCL_EARLY_FLAG(_LARGEFILE_SOURCE64,[#include <sys/stat.h>],
-	[char *p = (char *)open64;])
-    if test "x${tcl_flags}" = "x" ; then
-	AC_MSG_RESULT([none])
-    else
-	AC_MSG_RESULT([${tcl_flags}])
-    fi
-])
-
-#--------------------------------------------------------------------
-# TEA_TCL_64BIT_FLAGS
-#
-#	Check for what is defined in the way of 64-bit features.
-#
-# Arguments:
-#	None
-#
-# Results:
-#
-#	Might define the following vars:
-#		TCL_WIDE_INT_IS_LONG
-#		TCL_WIDE_INT_TYPE
-#		HAVE_STRUCT_DIRENT64
-#		HAVE_STRUCT_STAT64
-#		HAVE_TYPE_OFF64_T
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN([TEA_TCL_64BIT_FLAGS], [
-    AC_MSG_CHECKING([for 64-bit integer type])
-    AC_CACHE_VAL(tcl_cv_type_64bit,[
-	tcl_cv_type_64bit=none
-	# See if the compiler knows natively about __int64
-	AC_TRY_COMPILE(,[__int64 value = (__int64) 0;],
-	    tcl_type_64bit=__int64, tcl_type_64bit="long long")
-	# See if we should use long anyway  Note that we substitute in the
-	# type that is our current guess for a 64-bit type inside this check
-	# program, so it should be modified only carefully...
-        AC_TRY_COMPILE(,[switch (0) {
-            case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ;
-        }],tcl_cv_type_64bit=${tcl_type_64bit})])
-    if test "${tcl_cv_type_64bit}" = none ; then
-	AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Are wide integers to be implemented with C 'long's?])
-	AC_MSG_RESULT([using long])
-    elif test "${tcl_cv_type_64bit}" = "__int64" \
-		-a "${TEA_PLATFORM}" = "windows" ; then
-	# TEA specific: We actually want to use the default tcl.h checks in
-	# this case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER*
-	AC_MSG_RESULT([using Tcl header defaults])
-    else
-	AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit},
-	    [What type should be used to define wide integers?])
-	AC_MSG_RESULT([${tcl_cv_type_64bit}])
-
-	# Now check for auxiliary declarations
-	AC_CACHE_CHECK([for struct dirent64], tcl_cv_struct_dirent64,[
-	    AC_TRY_COMPILE([#include <sys/types.h>
-#include <sys/dirent.h>],[struct dirent64 p;],
-		tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)])
-	if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then
-	    AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in <sys/types.h>?])
-	fi
-
-	AC_CACHE_CHECK([for struct stat64], tcl_cv_struct_stat64,[
-	    AC_TRY_COMPILE([#include <sys/stat.h>],[struct stat64 p;
-],
-		tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)])
-	if test "x${tcl_cv_struct_stat64}" = "xyes" ; then
-	    AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in <sys/stat.h>?])
-	fi
-
-	AC_CHECK_FUNCS(open64 lseek64)
-	AC_MSG_CHECKING([for off64_t])
-	AC_CACHE_VAL(tcl_cv_type_off64_t,[
-	    AC_TRY_COMPILE([#include <sys/types.h>],[off64_t offset;
-],
-		tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)])
-	dnl Define HAVE_TYPE_OFF64_T only when the off64_t type and the
-	dnl functions lseek64 and open64 are defined.
-	if test "x${tcl_cv_type_off64_t}" = "xyes" && \
-	        test "x${ac_cv_func_lseek64}" = "xyes" && \
-	        test "x${ac_cv_func_open64}" = "xyes" ; then
-	    AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in <sys/types.h>?])
-	    AC_MSG_RESULT([yes])
-	else
-	    AC_MSG_RESULT([no])
-	fi
-    fi
-])
-
-##
-## Here ends the standard Tcl configuration bits and starts the
-## TEA specific functions
-##
-
-#------------------------------------------------------------------------
-# TEA_INIT --
-#
-#	Init various Tcl Extension Architecture (TEA) variables.
-#	This should be the first called TEA_* macro.
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Defines and substs the following vars:
-#		CYGPATH
-#		EXEEXT
-#	Defines only:
-#		TEA_VERSION
-#		TEA_INITED
-#		TEA_PLATFORM (windows or unix)
-#
-# "cygpath" is used on windows to generate native path names for include
-# files. These variables should only be used with the compiler and linker
-# since they generate native path names.
-#
-# EXEEXT
-#	Select the executable extension based on the host type.  This
-#	is a lightweight replacement for AC_EXEEXT that doesn't require
-#	a compiler.
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_INIT], [
-    # TEA extensions pass this us the version of TEA they think they
-    # are compatible with.
-    TEA_VERSION="3.9"
-
-    AC_MSG_CHECKING([for correct TEA configuration])
-    if test x"${PACKAGE_NAME}" = x ; then
-	AC_MSG_ERROR([
-The PACKAGE_NAME variable must be defined by your TEA configure.in])
-    fi
-    if test x"$1" = x ; then
-	AC_MSG_ERROR([
-TEA version not specified.])
-    elif test "$1" != "${TEA_VERSION}" ; then
-	AC_MSG_RESULT([warning: requested TEA version "$1", have "${TEA_VERSION}"])
-    else
-	AC_MSG_RESULT([ok (TEA ${TEA_VERSION})])
-    fi
-    case "`uname -s`" in
-	*win32*|*WIN32*|*MINGW32_*)
-	    AC_CHECK_PROG(CYGPATH, cygpath, cygpath -w, echo)
-	    EXEEXT=".exe"
-	    TEA_PLATFORM="windows"
-	    ;;
-	*CYGWIN_*)
-	    CYGPATH=echo
-	    EXEEXT=".exe"
-	    # TEA_PLATFORM is determined later in LOAD_TCLCONFIG
-	    ;;
-	*)
-	    CYGPATH=echo
-	    EXEEXT=""
-	    TEA_PLATFORM="unix"
-	    ;;
-    esac
-
-    # Check if exec_prefix is set. If not use fall back to prefix.
-    # Note when adjusted, so that TEA_PREFIX can correct for this.
-    # This is needed for recursive configures, since autoconf propagates
-    # $prefix, but not $exec_prefix (doh!).
-    if test x$exec_prefix = xNONE ; then
-	exec_prefix_default=yes
-	exec_prefix=$prefix
-    fi
-
-    AC_SUBST(EXEEXT)
-    AC_SUBST(CYGPATH)
-
-    # This package name must be replaced statically for AC_SUBST to work
-    AC_SUBST(PKG_LIB_FILE)
-    # Substitute STUB_LIB_FILE in case package creates a stub library too.
-    AC_SUBST(PKG_STUB_LIB_FILE)
-
-    # We AC_SUBST these here to ensure they are subst'ed,
-    # in case the user doesn't call TEA_ADD_...
-    AC_SUBST(PKG_STUB_SOURCES)
-    AC_SUBST(PKG_STUB_OBJECTS)
-    AC_SUBST(PKG_TCL_SOURCES)
-    AC_SUBST(PKG_HEADERS)
-    AC_SUBST(PKG_INCLUDES)
-    AC_SUBST(PKG_LIBS)
-    AC_SUBST(PKG_CFLAGS)
-])
-
-#------------------------------------------------------------------------
-# TEA_ADD_SOURCES --
-#
-#	Specify one or more source files.  Users should check for
-#	the right platform before adding to their list.
-#	It is not important to specify the directory, as long as it is
-#	in the generic, win or unix subdirectory of $(srcdir).
-#
-# Arguments:
-#	one or more file names
-#
-# Results:
-#
-#	Defines and substs the following vars:
-#		PKG_SOURCES
-#		PKG_OBJECTS
-#------------------------------------------------------------------------
-AC_DEFUN([TEA_ADD_SOURCES], [
-    vars="$@"
-    for i in $vars; do
-	case $i in
-	    [\$]*)
-		# allow $-var names
-		PKG_SOURCES="$PKG_SOURCES $i"
-		PKG_OBJECTS="$PKG_OBJECTS $i"
-		;;
-	    *)
-		# check for existence - allows for generic/win/unix VPATH
-		# To add more dirs here (like 'src'), you have to update VPATH
-		# in Makefile.in as well
-		if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \
-		    -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \
-		    -a ! -f "${srcdir}/macosx/$i" \
-		    ; then
-		    AC_MSG_ERROR([could not find source file '$i'])
-		fi
-		PKG_SOURCES="$PKG_SOURCES $i"
-		# this assumes it is in a VPATH dir
-		i=`basename $i`
-		# handle user calling this before or after TEA_SETUP_COMPILER
-		if test x"${OBJEXT}" != x ; then
-		    j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}"
-		else
-		    j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}"
-		fi
-		PKG_OBJECTS="$PKG_OBJECTS $j"
-		;;
-	esac
-    done
-    AC_SUBST(PKG_SOURCES)
-    AC_SUBST(PKG_OBJECTS)
-])
-
-#------------------------------------------------------------------------
-# TEA_ADD_STUB_SOURCES --
-#
-#	Specify one or more source files.  Users should check for
-#	the right platform before adding to their list.
-#	It is not important to specify the directory, as long as it is
-#	in the generic, win or unix subdirectory of $(srcdir).
-#
-# Arguments:
-#	one or more file names
-#
-# Results:
-#
-#	Defines and substs the following vars:
-#		PKG_STUB_SOURCES
-#		PKG_STUB_OBJECTS
-#------------------------------------------------------------------------
-AC_DEFUN([TEA_ADD_STUB_SOURCES], [
-    vars="$@"
-    for i in $vars; do
-	# check for existence - allows for generic/win/unix VPATH
-	if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \
-	    -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \
-	    -a ! -f "${srcdir}/macosx/$i" \
-	    ; then
-	    AC_MSG_ERROR([could not find stub source file '$i'])
-	fi
-	PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i"
-	# this assumes it is in a VPATH dir
-	i=`basename $i`
-	# handle user calling this before or after TEA_SETUP_COMPILER
-	if test x"${OBJEXT}" != x ; then
-	    j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}"
-	else
-	    j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}"
-	fi
-	PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j"
-    done
-    AC_SUBST(PKG_STUB_SOURCES)
-    AC_SUBST(PKG_STUB_OBJECTS)
-])
-
-#------------------------------------------------------------------------
-# TEA_ADD_TCL_SOURCES --
-#
-#	Specify one or more Tcl source files.  These should be platform
-#	independent runtime files.
-#
-# Arguments:
-#	one or more file names
-#
-# Results:
-#
-#	Defines and substs the following vars:
-#		PKG_TCL_SOURCES
-#------------------------------------------------------------------------
-AC_DEFUN([TEA_ADD_TCL_SOURCES], [
-    vars="$@"
-    for i in $vars; do
-	# check for existence, be strict because it is installed
-	if test ! -f "${srcdir}/$i" ; then
-	    AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i'])
-	fi
-	PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i"
-    done
-    AC_SUBST(PKG_TCL_SOURCES)
-])
-
-#------------------------------------------------------------------------
-# TEA_ADD_HEADERS --
-#
-#	Specify one or more source headers.  Users should check for
-#	the right platform before adding to their list.
-#
-# Arguments:
-#	one or more file names
-#
-# Results:
-#
-#	Defines and substs the following vars:
-#		PKG_HEADERS
-#------------------------------------------------------------------------
-AC_DEFUN([TEA_ADD_HEADERS], [
-    vars="$@"
-    for i in $vars; do
-	# check for existence, be strict because it is installed
-	if test ! -f "${srcdir}/$i" ; then
-	    AC_MSG_ERROR([could not find header file '${srcdir}/$i'])
-	fi
-	PKG_HEADERS="$PKG_HEADERS $i"
-    done
-    AC_SUBST(PKG_HEADERS)
-])
-
-#------------------------------------------------------------------------
-# TEA_ADD_INCLUDES --
-#
-#	Specify one or more include dirs.  Users should check for
-#	the right platform before adding to their list.
-#
-# Arguments:
-#	one or more file names
-#
-# Results:
-#
-#	Defines and substs the following vars:
-#		PKG_INCLUDES
-#------------------------------------------------------------------------
-AC_DEFUN([TEA_ADD_INCLUDES], [
-    vars="$@"
-    for i in $vars; do
-	PKG_INCLUDES="$PKG_INCLUDES $i"
-    done
-    AC_SUBST(PKG_INCLUDES)
-])
-
-#------------------------------------------------------------------------
-# TEA_ADD_LIBS --
-#
-#	Specify one or more libraries.  Users should check for
-#	the right platform before adding to their list.  For Windows,
-#	libraries provided in "foo.lib" format will be converted to
-#	"-lfoo" when using GCC (mingw).
-#
-# Arguments:
-#	one or more file names
-#
-# Results:
-#
-#	Defines and substs the following vars:
-#		PKG_LIBS
-#------------------------------------------------------------------------
-AC_DEFUN([TEA_ADD_LIBS], [
-    vars="$@"
-    for i in $vars; do
-	if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then
-	    # Convert foo.lib to -lfoo for GCC.  No-op if not *.lib
-	    i=`echo "$i" | sed -e 's/^\([[^-]].*\)\.lib[$]/-l\1/i'`
-	fi
-	PKG_LIBS="$PKG_LIBS $i"
-    done
-    AC_SUBST(PKG_LIBS)
-])
-
-#------------------------------------------------------------------------
-# TEA_ADD_CFLAGS --
-#
-#	Specify one or more CFLAGS.  Users should check for
-#	the right platform before adding to their list.
-#
-# Arguments:
-#	one or more file names
-#
-# Results:
-#
-#	Defines and substs the following vars:
-#		PKG_CFLAGS
-#------------------------------------------------------------------------
-AC_DEFUN([TEA_ADD_CFLAGS], [
-    PKG_CFLAGS="$PKG_CFLAGS $@"
-    AC_SUBST(PKG_CFLAGS)
-])
-
-#------------------------------------------------------------------------
-# TEA_PREFIX --
-#
-#	Handle the --prefix=... option by defaulting to what Tcl gave
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	If --prefix or --exec-prefix was not specified, $prefix and
-#	$exec_prefix will be set to the values given to Tcl when it was
-#	configured.
-#------------------------------------------------------------------------
-AC_DEFUN([TEA_PREFIX], [
-    if test "${prefix}" = "NONE"; then
-	prefix_default=yes
-	if test x"${TCL_PREFIX}" != x; then
-	    AC_MSG_NOTICE([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}])
-	    prefix=${TCL_PREFIX}
-	else
-	    AC_MSG_NOTICE([--prefix defaulting to /usr/local])
-	    prefix=/usr/local
-	fi
-    fi
-    if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \
-	-o x"${exec_prefix_default}" = x"yes" ; then
-	if test x"${TCL_EXEC_PREFIX}" != x; then
-	    AC_MSG_NOTICE([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}])
-	    exec_prefix=${TCL_EXEC_PREFIX}
-	else
-	    AC_MSG_NOTICE([--exec-prefix defaulting to ${prefix}])
-	    exec_prefix=$prefix
-	fi
-    fi
-])
-
-#------------------------------------------------------------------------
-# TEA_SETUP_COMPILER_CC --
-#
-#	Do compiler checks the way we want.  This is just a replacement
-#	for AC_PROG_CC in TEA configure.in files to make them cleaner.
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Sets up CC var and other standard bits we need to make executables.
-#------------------------------------------------------------------------
-AC_DEFUN([TEA_SETUP_COMPILER_CC], [
-    # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE)
-    # in this macro, they need to go into TEA_SETUP_COMPILER instead.
-
-    # If the user did not set CFLAGS, set it now to keep
-    # the AC_PROG_CC macro from adding "-g -O2".
-    if test "${CFLAGS+set}" != "set" ; then
-	CFLAGS=""
-    fi
-
-    AC_PROG_CC
-    AC_PROG_CPP
-
-    AC_PROG_INSTALL
-
-    #--------------------------------------------------------------------
-    # Checks to see if the make program sets the $MAKE variable.
-    #--------------------------------------------------------------------
-
-    AC_PROG_MAKE_SET
-
-    #--------------------------------------------------------------------
-    # Find ranlib
-    #--------------------------------------------------------------------
-
-    AC_PROG_RANLIB
-
-    #--------------------------------------------------------------------
-    # Determines the correct binary file extension (.o, .obj, .exe etc.)
-    #--------------------------------------------------------------------
-
-    AC_OBJEXT
-    AC_EXEEXT
-])
-
-#------------------------------------------------------------------------
-# TEA_SETUP_COMPILER --
-#
-#	Do compiler checks that use the compiler.  This must go after
-#	TEA_SETUP_COMPILER_CC, which does the actual compiler check.
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Sets up CC var and other standard bits we need to make executables.
-#------------------------------------------------------------------------
-AC_DEFUN([TEA_SETUP_COMPILER], [
-    # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here.
-    AC_REQUIRE([TEA_SETUP_COMPILER_CC])
-
-    #------------------------------------------------------------------------
-    # If we're using GCC, see if the compiler understands -pipe. If so, use it.
-    # It makes compiling go faster.  (This is only a performance feature.)
-    #------------------------------------------------------------------------
-
-    if test -z "$no_pipe" -a -n "$GCC"; then
-	AC_CACHE_CHECK([if the compiler understands -pipe],
-	    tcl_cv_cc_pipe, [
-	    hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe"
-	    AC_TRY_COMPILE(,, tcl_cv_cc_pipe=yes, tcl_cv_cc_pipe=no)
-	    CFLAGS=$hold_cflags])
-	if test $tcl_cv_cc_pipe = yes; then
-	    CFLAGS="$CFLAGS -pipe"
-	fi
-    fi
-
-    #--------------------------------------------------------------------
-    # Common compiler flag setup
-    #--------------------------------------------------------------------
-
-    AC_C_BIGENDIAN
-    if test "${TEA_PLATFORM}" = "unix" ; then
-	TEA_TCL_LINK_LIBS
-	TEA_MISSING_POSIX_HEADERS
-	# Let the user call this, because if it triggers, they will
-	# need a compat/strtod.c that is correct.  Users can also
-	# use Tcl_GetDouble(FromObj) instead.
-	#TEA_BUGGY_STRTOD
-    fi
-])
-
-#------------------------------------------------------------------------
-# TEA_MAKE_LIB --
-#
-#	Generate a line that can be used to build a shared/unshared library
-#	in a platform independent manner.
-#
-# Arguments:
-#	none
-#
-#	Requires:
-#
-# Results:
-#
-#	Defines the following vars:
-#	CFLAGS -	Done late here to note disturb other AC macros
-#       MAKE_LIB -      Command to execute to build the Tcl library;
-#                       differs depending on whether or not Tcl is being
-#                       compiled as a shared library.
-#	MAKE_SHARED_LIB	Makefile rule for building a shared library
-#	MAKE_STATIC_LIB	Makefile rule for building a static library
-#	MAKE_STUB_LIB	Makefile rule for building a stub library
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_MAKE_LIB], [
-    if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then
-	MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)"
-	MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS)"
-	MAKE_STUB_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_STUB_OBJECTS)"
-    else
-	MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)"
-	MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}"
-	MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)"
-    fi
-
-    if test "${SHARED_BUILD}" = "1" ; then
-	MAKE_LIB="${MAKE_SHARED_LIB} "
-    else
-	MAKE_LIB="${MAKE_STATIC_LIB} "
-    fi
-
-    #--------------------------------------------------------------------
-    # Shared libraries and static libraries have different names.
-    # Use the double eval to make sure any variables in the suffix is
-    # substituted. (@@@ Might not be necessary anymore)
-    #--------------------------------------------------------------------
-
-    if test "${TEA_PLATFORM}" = "windows" ; then
-	if test "${SHARED_BUILD}" = "1" ; then
-	    # We force the unresolved linking of symbols that are really in
-	    # the private libraries of Tcl and Tk.
-	    SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\""
-	    if test x"${TK_BIN_DIR}" != x ; then
-		SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\""
-	    fi
-	    eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}"
-	else
-	    eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}"
-	fi
-	# Some packages build their own stubs libraries
-	eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}"
-	if test "$GCC" = "yes"; then
-	    PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE}
-	fi
-	# These aren't needed on Windows (either MSVC or gcc)
-	RANLIB=:
-	RANLIB_STUB=:
-    else
-	RANLIB_STUB="${RANLIB}"
-	if test "${SHARED_BUILD}" = "1" ; then
-	    SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}"
-	    if test x"${TK_BIN_DIR}" != x ; then
-		SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}"
-	    fi
-	    eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}"
-	    RANLIB=:
-	else
-	    eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}"
-	fi
-	# Some packages build their own stubs libraries
-	eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}"
-    fi
-
-    # These are escaped so that only CFLAGS is picked up at configure time.
-    # The other values will be substituted at make time.
-    CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}"
-    if test "${SHARED_BUILD}" = "1" ; then
-	CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}"
-    fi
-
-    AC_SUBST(MAKE_LIB)
-    AC_SUBST(MAKE_SHARED_LIB)
-    AC_SUBST(MAKE_STATIC_LIB)
-    AC_SUBST(MAKE_STUB_LIB)
-    AC_SUBST(RANLIB_STUB)
-])
-
-#------------------------------------------------------------------------
-# TEA_LIB_SPEC --
-#
-#	Compute the name of an existing object library located in libdir
-#	from the given base name and produce the appropriate linker flags.
-#
-# Arguments:
-#	basename	The base name of the library without version
-#			numbers, extensions, or "lib" prefixes.
-#	extra_dir	Extra directory in which to search for the
-#			library.  This location is used first, then
-#			$prefix/$exec-prefix, then some defaults.
-#
-# Requires:
-#	TEA_INIT and TEA_PREFIX must be called first.
-#
-# Results:
-#
-#	Defines the following vars:
-#		${basename}_LIB_NAME	The computed library name.
-#		${basename}_LIB_SPEC	The computed linker flags.
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_LIB_SPEC], [
-    AC_MSG_CHECKING([for $1 library])
-
-    # Look in exec-prefix for the library (defined by TEA_PREFIX).
-
-    tea_lib_name_dir="${exec_prefix}/lib"
-
-    # Or in a user-specified location.
-
-    if test x"$2" != x ; then
-	tea_extra_lib_dir=$2
-    else
-	tea_extra_lib_dir=NONE
-    fi
-
-    for i in \
-	    `ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
-	    `ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \
-	    `ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
-	    `ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \
-	    `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \
-	    `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \
-	    `ls -dr /usr/lib64/$1[[0-9]]*.lib 2>/dev/null ` \
-	    `ls -dr /usr/lib64/lib$1[[0-9]]* 2>/dev/null ` \
-	    `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \
-	    `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do
-	if test -f "$i" ; then
-	    tea_lib_name_dir=`dirname $i`
-	    $1_LIB_NAME=`basename $i`
-	    $1_LIB_PATH_NAME=$i
-	    break
-	fi
-    done
-
-    if test "${TEA_PLATFORM}" = "windows"; then
-	$1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\"
-    else
-	# Strip off the leading "lib" and trailing ".a" or ".so"
-
-	tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'`
-	$1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}"
-    fi
-
-    if test "x${$1_LIB_NAME}" = x ; then
-	AC_MSG_ERROR([not found])
-    else
-	AC_MSG_RESULT([${$1_LIB_SPEC}])
-    fi
-])
-
-#------------------------------------------------------------------------
-# TEA_PRIVATE_TCL_HEADERS --
-#
-#	Locate the private Tcl include files
-#
-# Arguments:
-#
-#	Requires:
-#		TCL_SRC_DIR	Assumes that TEA_LOAD_TCLCONFIG has
-#				already been called.
-#
-# Results:
-#
-#	Substs the following vars:
-#		TCL_TOP_DIR_NATIVE
-#		TCL_INCLUDES
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_PRIVATE_TCL_HEADERS], [
-    # Allow for --with-tclinclude to take effect and define ${ac_cv_c_tclh}
-    AC_REQUIRE([TEA_PUBLIC_TCL_HEADERS])
-    AC_MSG_CHECKING([for Tcl private include files])
-
-    TCL_SRC_DIR_NATIVE=`${CYGPATH} ${TCL_SRC_DIR}`
-    TCL_TOP_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}\"
-
-    # Check to see if tcl<Plat>Port.h isn't already with the public headers
-    # Don't look for tclInt.h because that resides with tcl.h in the core
-    # sources, but the <plat>Port headers are in a different directory
-    if test "${TEA_PLATFORM}" = "windows" -a \
-	-f "${ac_cv_c_tclh}/tclWinPort.h"; then
-	result="private headers found with public headers"
-    elif test "${TEA_PLATFORM}" = "unix" -a \
-	-f "${ac_cv_c_tclh}/tclUnixPort.h"; then
-	result="private headers found with public headers"
-    else
-	TCL_GENERIC_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/generic\"
-	if test "${TEA_PLATFORM}" = "windows"; then
-	    TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/win\"
-	else
-	    TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/unix\"
-	fi
-	# Overwrite the previous TCL_INCLUDES as this should capture both
-	# public and private headers in the same set.
-	# We want to ensure these are substituted so as not to require
-	# any *_NATIVE vars be defined in the Makefile
-	TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}"
-	if test "`uname -s`" = "Darwin"; then
-            # If Tcl was built as a framework, attempt to use
-            # the framework's Headers and PrivateHeaders directories
-            case ${TCL_DEFS} in
-	    	*TCL_FRAMEWORK*)
-		    if test -d "${TCL_BIN_DIR}/Headers" -a \
-			    -d "${TCL_BIN_DIR}/PrivateHeaders"; then
-			TCL_INCLUDES="-I\"${TCL_BIN_DIR}/Headers\" -I\"${TCL_BIN_DIR}/PrivateHeaders\" ${TCL_INCLUDES}"
-		    else
-			TCL_INCLUDES="${TCL_INCLUDES} ${TCL_INCLUDE_SPEC} `echo "${TCL_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`"
-		    fi
-	            ;;
-	    esac
-	    result="Using ${TCL_INCLUDES}"
-	else
-	    if test ! -f "${TCL_SRC_DIR}/generic/tclInt.h" ; then
-		AC_MSG_ERROR([Cannot find private header tclInt.h in ${TCL_SRC_DIR}])
-	    fi
-	    result="Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}"
-	fi
-    fi
-
-    AC_SUBST(TCL_TOP_DIR_NATIVE)
-
-    AC_SUBST(TCL_INCLUDES)
-    AC_MSG_RESULT([${result}])
-])
-
-#------------------------------------------------------------------------
-# TEA_PUBLIC_TCL_HEADERS --
-#
-#	Locate the installed public Tcl header files
-#
-# Arguments:
-#	None.
-#
-# Requires:
-#	CYGPATH must be set
-#
-# Results:
-#
-#	Adds a --with-tclinclude switch to configure.
-#	Result is cached.
-#
-#	Substs the following vars:
-#		TCL_INCLUDES
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_PUBLIC_TCL_HEADERS], [
-    AC_MSG_CHECKING([for Tcl public headers])
-
-    AC_ARG_WITH(tclinclude, [  --with-tclinclude       directory containing the public Tcl header files], with_tclinclude=${withval})
-
-    AC_CACHE_VAL(ac_cv_c_tclh, [
-	# Use the value from --with-tclinclude, if it was given
-
-	if test x"${with_tclinclude}" != x ; then
-	    if test -f "${with_tclinclude}/tcl.h" ; then
-		ac_cv_c_tclh=${with_tclinclude}
-	    else
-		AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h])
-	    fi
-	else
-	    list=""
-	    if test "`uname -s`" = "Darwin"; then
-		# If Tcl was built as a framework, attempt to use
-		# the framework's Headers directory
-		case ${TCL_DEFS} in
-		    *TCL_FRAMEWORK*)
-			list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`"
-			;;
-		esac
-	    fi
-
-	    # Look in the source dir only if Tcl is not installed,
-	    # and in that situation, look there before installed locations.
-	    if test -f "${TCL_BIN_DIR}/Makefile" ; then
-		list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`"
-	    fi
-
-	    # Check order: pkg --prefix location, Tcl's --prefix location,
-	    # relative to directory of tclConfig.sh.
-
-	    eval "temp_includedir=${includedir}"
-	    list="$list \
-		`ls -d ${temp_includedir}        2>/dev/null` \
-		`ls -d ${TCL_PREFIX}/include     2>/dev/null` \
-		`ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`"
-	    if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then
-		list="$list /usr/local/include /usr/include"
-		if test x"${TCL_INCLUDE_SPEC}" != x ; then
-		    d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'`
-		    list="$list `ls -d ${d} 2>/dev/null`"
-		fi
-	    fi
-	    for i in $list ; do
-		if test -f "$i/tcl.h" ; then
-		    ac_cv_c_tclh=$i
-		    break
-		fi
-	    done
-	fi
-    ])
-
-    # Print a message based on how we determined the include path
-
-    if test x"${ac_cv_c_tclh}" = x ; then
-	AC_MSG_ERROR([tcl.h not found.  Please specify its location with --with-tclinclude])
-    else
-	AC_MSG_RESULT([${ac_cv_c_tclh}])
-    fi
-
-    # Convert to a native path and substitute into the output files.
-
-    INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}`
-
-    TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
-
-    AC_SUBST(TCL_INCLUDES)
-])
-
-#------------------------------------------------------------------------
-# TEA_PRIVATE_TK_HEADERS --
-#
-#	Locate the private Tk include files
-#
-# Arguments:
-#
-#	Requires:
-#		TK_SRC_DIR	Assumes that TEA_LOAD_TKCONFIG has
-#				 already been called.
-#
-# Results:
-#
-#	Substs the following vars:
-#		TK_INCLUDES
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_PRIVATE_TK_HEADERS], [
-    # Allow for --with-tkinclude to take effect and define ${ac_cv_c_tkh}
-    AC_REQUIRE([TEA_PUBLIC_TK_HEADERS])
-    AC_MSG_CHECKING([for Tk private include files])
-
-    TK_SRC_DIR_NATIVE=`${CYGPATH} ${TK_SRC_DIR}`
-    TK_TOP_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}\"
-
-    # Check to see if tk<Plat>Port.h isn't already with the public headers
-    # Don't look for tkInt.h because that resides with tk.h in the core
-    # sources, but the <plat>Port headers are in a different directory
-    if test "${TEA_PLATFORM}" = "windows" -a \
-	-f "${ac_cv_c_tkh}/tkWinPort.h"; then
-	result="private headers found with public headers"
-    elif test "${TEA_PLATFORM}" = "unix" -a \
-	-f "${ac_cv_c_tkh}/tkUnixPort.h"; then
-	result="private headers found with public headers"
-    else
-	TK_GENERIC_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/generic\"
-	TK_XLIB_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/xlib\"
-	if test "${TEA_PLATFORM}" = "windows"; then
-	    TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/win\"
-	else
-	    TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/unix\"
-	fi
-	# Overwrite the previous TK_INCLUDES as this should capture both
-	# public and private headers in the same set.
-	# We want to ensure these are substituted so as not to require
-	# any *_NATIVE vars be defined in the Makefile
-	TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}"
-	# Detect and add ttk subdir
-	if test -d "${TK_SRC_DIR}/generic/ttk"; then
-	   TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/generic/ttk\""
-	fi
-	if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then
-	   TK_INCLUDES="${TK_INCLUDES} -I\"${TK_XLIB_DIR_NATIVE}\""
-	fi
-	if test "${TEA_WINDOWINGSYSTEM}" = "aqua"; then
-	   TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/macosx\""
-	fi
-	if test "`uname -s`" = "Darwin"; then
-	    # If Tk was built as a framework, attempt to use
-	    # the framework's Headers and PrivateHeaders directories
-	    case ${TK_DEFS} in
-		*TK_FRAMEWORK*)
-			if test -d "${TK_BIN_DIR}/Headers" -a \
-				-d "${TK_BIN_DIR}/PrivateHeaders"; then
-			    TK_INCLUDES="-I\"${TK_BIN_DIR}/Headers\" -I\"${TK_BIN_DIR}/PrivateHeaders\" ${TK_INCLUDES}"
-			else
-			    TK_INCLUDES="${TK_INCLUDES} ${TK_INCLUDE_SPEC} `echo "${TK_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`"
-			fi
-			;;
-	    esac
-	    result="Using ${TK_INCLUDES}"
-	else
-	    if test ! -f "${TK_SRC_DIR}/generic/tkInt.h" ; then
-	       AC_MSG_ERROR([Cannot find private header tkInt.h in ${TK_SRC_DIR}])
-	    fi
-	    result="Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}"
-	fi
-    fi
-
-    AC_SUBST(TK_TOP_DIR_NATIVE)
-    AC_SUBST(TK_XLIB_DIR_NATIVE)
-
-    AC_SUBST(TK_INCLUDES)
-    AC_MSG_RESULT([${result}])
-])
-
-#------------------------------------------------------------------------
-# TEA_PUBLIC_TK_HEADERS --
-#
-#	Locate the installed public Tk header files
-#
-# Arguments:
-#	None.
-#
-# Requires:
-#	CYGPATH must be set
-#
-# Results:
-#
-#	Adds a --with-tkinclude switch to configure.
-#	Result is cached.
-#
-#	Substs the following vars:
-#		TK_INCLUDES
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_PUBLIC_TK_HEADERS], [
-    AC_MSG_CHECKING([for Tk public headers])
-
-    AC_ARG_WITH(tkinclude, [  --with-tkinclude        directory containing the public Tk header files], with_tkinclude=${withval})
-
-    AC_CACHE_VAL(ac_cv_c_tkh, [
-	# Use the value from --with-tkinclude, if it was given
-
-	if test x"${with_tkinclude}" != x ; then
-	    if test -f "${with_tkinclude}/tk.h" ; then
-		ac_cv_c_tkh=${with_tkinclude}
-	    else
-		AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h])
-	    fi
-	else
-	    list=""
-	    if test "`uname -s`" = "Darwin"; then
-		# If Tk was built as a framework, attempt to use
-		# the framework's Headers directory.
-		case ${TK_DEFS} in
-		    *TK_FRAMEWORK*)
-			list="`ls -d ${TK_BIN_DIR}/Headers 2>/dev/null`"
-			;;
-		esac
-	    fi
-
-	    # Look in the source dir only if Tk is not installed,
-	    # and in that situation, look there before installed locations.
-	    if test -f "${TK_BIN_DIR}/Makefile" ; then
-		list="$list `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`"
-	    fi
-
-	    # Check order: pkg --prefix location, Tk's --prefix location,
-	    # relative to directory of tkConfig.sh, Tcl's --prefix location,
-	    # relative to directory of tclConfig.sh.
-
-	    eval "temp_includedir=${includedir}"
-	    list="$list \
-		`ls -d ${temp_includedir}        2>/dev/null` \
-		`ls -d ${TK_PREFIX}/include      2>/dev/null` \
-		`ls -d ${TK_BIN_DIR}/../include  2>/dev/null` \
-		`ls -d ${TCL_PREFIX}/include     2>/dev/null` \
-		`ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`"
-	    if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then
-		list="$list /usr/local/include /usr/include"
-		if test x"${TK_INCLUDE_SPEC}" != x ; then
-		    d=`echo "${TK_INCLUDE_SPEC}" | sed -e 's/^-I//'`
-		    list="$list `ls -d ${d} 2>/dev/null`"
-		fi
-	    fi
-	    for i in $list ; do
-		if test -f "$i/tk.h" ; then
-		    ac_cv_c_tkh=$i
-		    break
-		fi
-	    done
-	fi
-    ])
-
-    # Print a message based on how we determined the include path
-
-    if test x"${ac_cv_c_tkh}" = x ; then
-	AC_MSG_ERROR([tk.h not found.  Please specify its location with --with-tkinclude])
-    else
-	AC_MSG_RESULT([${ac_cv_c_tkh}])
-    fi
-
-    # Convert to a native path and substitute into the output files.
-
-    INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}`
-
-    TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
-
-    AC_SUBST(TK_INCLUDES)
-
-    if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then
-	# On Windows and Aqua, we need the X compat headers
-	AC_MSG_CHECKING([for X11 header files])
-	if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then
-	    INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`"
-	    TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
-	    AC_SUBST(TK_XINCLUDES)
-	fi
-	AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}])
-    fi
-])
-
-#------------------------------------------------------------------------
-# TEA_PATH_CONFIG --
-#
-#	Locate the ${1}Config.sh file and perform a sanity check on
-#	the ${1} compile flags.  These are used by packages like
-#	[incr Tk] that load *Config.sh files from more than Tcl and Tk.
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--with-$1=...
-#
-#	Defines the following vars:
-#		$1_BIN_DIR	Full path to the directory containing
-#				the $1Config.sh file
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_PATH_CONFIG], [
-    #
-    # Ok, lets find the $1 configuration
-    # First, look for one uninstalled.
-    # the alternative search directory is invoked by --with-$1
-    #
-
-    if test x"${no_$1}" = x ; then
-	# we reset no_$1 in case something fails here
-	no_$1=true
-	AC_ARG_WITH($1, [  --with-$1              directory containing $1 configuration ($1Config.sh)], with_$1config=${withval})
-	AC_MSG_CHECKING([for $1 configuration])
-	AC_CACHE_VAL(ac_cv_c_$1config,[
-
-	    # First check to see if --with-$1 was specified.
-	    if test x"${with_$1config}" != x ; then
-		case ${with_$1config} in
-		    */$1Config.sh )
-			if test -f ${with_$1config}; then
-			    AC_MSG_WARN([--with-$1 argument should refer to directory containing $1Config.sh, not to $1Config.sh itself])
-			    with_$1config=`echo ${with_$1config} | sed 's!/$1Config\.sh$!!'`
-			fi;;
-		esac
-		if test -f "${with_$1config}/$1Config.sh" ; then
-		    ac_cv_c_$1config=`(cd ${with_$1config}; pwd)`
-		else
-		    AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh])
-		fi
-	    fi
-
-	    # then check for a private $1 installation
-	    if test x"${ac_cv_c_$1config}" = x ; then
-		for i in \
-			../$1 \
-			`ls -dr ../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
-			`ls -dr ../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
-			`ls -dr ../$1*[[0-9]].[[0-9]] 2>/dev/null` \
-			`ls -dr ../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
-			../../$1 \
-			`ls -dr ../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
-			`ls -dr ../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
-			`ls -dr ../../$1*[[0-9]].[[0-9]] 2>/dev/null` \
-			`ls -dr ../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
-			../../../$1 \
-			`ls -dr ../../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
-			`ls -dr ../../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
-			`ls -dr ../../../$1*[[0-9]].[[0-9]] 2>/dev/null` \
-			`ls -dr ../../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
-			${srcdir}/../$1 \
-			`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
-			`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
-			`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]] 2>/dev/null` \
-			`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
-			; do
-		    if test -f "$i/$1Config.sh" ; then
-			ac_cv_c_$1config=`(cd $i; pwd)`
-			break
-		    fi
-		    if test -f "$i/unix/$1Config.sh" ; then
-			ac_cv_c_$1config=`(cd $i/unix; pwd)`
-			break
-		    fi
-		done
-	    fi
-
-	    # check in a few common install locations
-	    if test x"${ac_cv_c_$1config}" = x ; then
-		for i in `ls -d ${libdir} 2>/dev/null` \
-			`ls -d ${exec_prefix}/lib 2>/dev/null` \
-			`ls -d ${prefix}/lib 2>/dev/null` \
-			`ls -d /usr/local/lib 2>/dev/null` \
-			`ls -d /usr/contrib/lib 2>/dev/null` \
-			`ls -d /usr/lib 2>/dev/null` \
-			`ls -d /usr/lib64 2>/dev/null` \
-			; do
-		    if test -f "$i/$1Config.sh" ; then
-			ac_cv_c_$1config=`(cd $i; pwd)`
-			break
-		    fi
-		done
-	    fi
-	])
-
-	if test x"${ac_cv_c_$1config}" = x ; then
-	    $1_BIN_DIR="# no $1 configs found"
-	    AC_MSG_WARN([Cannot find $1 configuration definitions])
-	    exit 0
-	else
-	    no_$1=
-	    $1_BIN_DIR=${ac_cv_c_$1config}
-	    AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh])
-	fi
-    fi
-])
-
-#------------------------------------------------------------------------
-# TEA_LOAD_CONFIG --
-#
-#	Load the $1Config.sh file
-#
-# Arguments:
-#
-#	Requires the following vars to be set:
-#		$1_BIN_DIR
-#
-# Results:
-#
-#	Subst the following vars:
-#		$1_SRC_DIR
-#		$1_LIB_FILE
-#		$1_LIB_SPEC
-#
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_LOAD_CONFIG], [
-    AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh])
-
-    if test -f "${$1_BIN_DIR}/$1Config.sh" ; then
-        AC_MSG_RESULT([loading])
-	. "${$1_BIN_DIR}/$1Config.sh"
-    else
-        AC_MSG_RESULT([file not found])
-    fi
-
-    #
-    # If the $1_BIN_DIR is the build directory (not the install directory),
-    # then set the common variable name to the value of the build variables.
-    # For example, the variable $1_LIB_SPEC will be set to the value
-    # of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC
-    # instead of $1_BUILD_LIB_SPEC since it will work with both an
-    # installed and uninstalled version of Tcl.
-    #
-
-    if test -f "${$1_BIN_DIR}/Makefile" ; then
-	AC_MSG_WARN([Found Makefile - using build library specs for $1])
-        $1_LIB_SPEC=${$1_BUILD_LIB_SPEC}
-        $1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC}
-        $1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH}
-    fi
-
-    AC_SUBST($1_VERSION)
-    AC_SUBST($1_BIN_DIR)
-    AC_SUBST($1_SRC_DIR)
-
-    AC_SUBST($1_LIB_FILE)
-    AC_SUBST($1_LIB_SPEC)
-
-    AC_SUBST($1_STUB_LIB_FILE)
-    AC_SUBST($1_STUB_LIB_SPEC)
-    AC_SUBST($1_STUB_LIB_PATH)
-
-    # Allow the caller to prevent this auto-check by specifying any 2nd arg
-    AS_IF([test "x$2" = x], [
-	# Check both upper and lower-case variants
-	# If a dev wanted non-stubs libs, this function could take an option
-	# to not use _STUB in the paths below
-	AS_IF([test "x${$1_STUB_LIB_SPEC}" = x],
-	    [TEA_LOAD_CONFIG_LIB(translit($1,[a-z],[A-Z])_STUB)],
-	    [TEA_LOAD_CONFIG_LIB($1_STUB)])
-    ])
-])
-
-#------------------------------------------------------------------------
-# TEA_LOAD_CONFIG_LIB --
-#
-#	Helper function to load correct library from another extension's
-#	${PACKAGE}Config.sh.
-#
-# Results:
-#	Adds to LIBS the appropriate extension library
-#
-#------------------------------------------------------------------------
-AC_DEFUN([TEA_LOAD_CONFIG_LIB], [
-    AC_MSG_CHECKING([For $1 library for LIBS])
-    # This simplifies the use of stub libraries by automatically adding
-    # the stub lib to your path.  Normally this would add to SHLIB_LD_LIBS,
-    # but this is called before CONFIG_CFLAGS.  More importantly, this adds
-    # to PKG_LIBS, which becomes LIBS, and that is only used by SHLIB_LD.
-    if test "x${$1_LIB_SPEC}" != "x" ; then
-	if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes" ; then
-	    TEA_ADD_LIBS([\"`${CYGPATH} ${$1_LIB_PATH}`\"])
-	    AC_MSG_RESULT([using $1_LIB_PATH ${$1_LIB_PATH}])
-	else
-	    TEA_ADD_LIBS([${$1_LIB_SPEC}])
-	    AC_MSG_RESULT([using $1_LIB_SPEC ${$1_LIB_SPEC}])
-	fi
-    else
-	AC_MSG_RESULT([file not found])
-    fi
-])
-
-#------------------------------------------------------------------------
-# TEA_EXPORT_CONFIG --
-#
-#	Define the data to insert into the ${PACKAGE}Config.sh file
-#
-# Arguments:
-#
-#	Requires the following vars to be set:
-#		$1
-#
-# Results:
-#	Subst the following vars:
-#
-#------------------------------------------------------------------------
-
-AC_DEFUN(TEA_EXPORT_CONFIG, [
-    #--------------------------------------------------------------------
-    # These are for $1Config.sh
-    #--------------------------------------------------------------------
-
-    # pkglibdir must be a fully qualified path and (not ${exec_prefix}/lib)
-    eval pkglibdir="[$]{libdir}/$1${PACKAGE_VERSION}"
-    if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then
-	eval $1_LIB_FLAG="-l$1${PACKAGE_VERSION}${DBGX}"
-	eval $1_STUB_LIB_FLAG="-l$1stub${PACKAGE_VERSION}${DBGX}"
-    else
-	eval $1_LIB_FLAG="-l$1`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}"
-	eval $1_STUB_LIB_FLAG="-l$1stub`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}"
-    fi
-    $1_BUILD_LIB_SPEC="-L`pwd` ${$1_LIB_FLAG}"
-    $1_LIB_SPEC="-L${pkglibdir} ${$1_LIB_FLAG}"
-    $1_BUILD_STUB_LIB_SPEC="-L`pwd` [$]{$1_STUB_LIB_FLAG}"
-    $1_STUB_LIB_SPEC="-L${pkglibdir} [$]{$1_STUB_LIB_FLAG}"
-    $1_BUILD_STUB_LIB_PATH="`pwd`/[$]{PKG_STUB_LIB_FILE}"
-    $1_STUB_LIB_PATH="${pkglibdir}/[$]{PKG_STUB_LIB_FILE}"
-
-    AC_SUBST($1_BUILD_LIB_SPEC)
-    AC_SUBST($1_LIB_SPEC)
-    AC_SUBST($1_BUILD_STUB_LIB_SPEC)
-    AC_SUBST($1_STUB_LIB_SPEC)
-    AC_SUBST($1_BUILD_STUB_LIB_PATH)
-    AC_SUBST($1_STUB_LIB_PATH)
-
-    AC_SUBST(MAJOR_VERSION)
-    AC_SUBST(MINOR_VERSION)
-    AC_SUBST(PATCHLEVEL)
-])
-
-
-#------------------------------------------------------------------------
-# TEA_PATH_CELIB --
-#
-#	Locate Keuchel's celib emulation layer for targeting Win/CE
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--with-celib=...
-#
-#	Defines the following vars:
-#		CELIB_DIR	Full path to the directory containing
-#				the include and platform lib files
-#------------------------------------------------------------------------
-
-AC_DEFUN([TEA_PATH_CELIB], [
-    # First, look for one uninstalled.
-    # the alternative search directory is invoked by --with-celib
-
-    if test x"${no_celib}" = x ; then
-	# we reset no_celib in case something fails here
-	no_celib=true
-	AC_ARG_WITH(celib,[  --with-celib=DIR        use Windows/CE support library from DIR], with_celibconfig=${withval})
-	AC_MSG_CHECKING([for Windows/CE celib directory])
-	AC_CACHE_VAL(ac_cv_c_celibconfig,[
-	    # First check to see if --with-celibconfig was specified.
-	    if test x"${with_celibconfig}" != x ; then
-		if test -d "${with_celibconfig}/inc" ; then
-		    ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)`
-		else
-		    AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory])
-		fi
-	    fi
-
-	    # then check for a celib library
-	    if test x"${ac_cv_c_celibconfig}" = x ; then
-		for i in \
-			../celib-palm-3.0 \
-			../celib \
-			../../celib-palm-3.0 \
-			../../celib \
-			`ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \
-			${srcdir}/../celib-palm-3.0 \
-			${srcdir}/../celib \
-			`ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \
-			; do
-		    if test -d "$i/inc" ; then
-			ac_cv_c_celibconfig=`(cd $i; pwd)`
-			break
-		    fi
-		done
-	    fi
-	])
-	if test x"${ac_cv_c_celibconfig}" = x ; then
-	    AC_MSG_ERROR([Cannot find celib support library directory])
-	else
-	    no_celib=
-	    CELIB_DIR=${ac_cv_c_celibconfig}
-	    CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'`
-	    AC_MSG_RESULT([found $CELIB_DIR])
-	fi
-    fi
-])
-
-
-# Local Variables:
-# mode: autoconf
-# End:
diff --git a/components/external/SQLite-3.8.1/autoconf/tea/win/makefile.vc b/components/external/SQLite-3.8.1/autoconf/tea/win/makefile.vc
deleted file mode 100644
index a5e4627707..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/tea/win/makefile.vc
+++ /dev/null
@@ -1,414 +0,0 @@
-# makefile.vc --                                               -*- Makefile -*-
-#
-# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
-#
-# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to 
-# make it suitable as a general package makefile. Look for the word EDIT
-# which marks sections that may need modification. As a minumum you will
-# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values
-# relevant to your package.
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-# 
-# Copyright (c) 1995-1996 Sun Microsystems, Inc.
-# Copyright (c) 1998-2000 Ajuba Solutions.
-# Copyright (c) 2001 ActiveState Corporation.
-# Copyright (c) 2001-2002 David Gravereaux.
-# Copyright (c) 2003 Pat Thoyts
-#
-#-------------------------------------------------------------------------
-# RCS: @(#)$Id: makefile.vc,v 1.4 2004/07/26 08:22:05 patthoyts Exp $
-#-------------------------------------------------------------------------
-
-!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR)
-MSG = ^
-You will need to run vcvars32.bat from Developer Studio, first, to setup^
-the environment.  Jump to this line to read the new instructions.
-!error $(MSG)
-!endif
-
-#------------------------------------------------------------------------------
-# HOW TO USE this makefile:
-#
-# 1)  It is now necessary to have %MSVCDir% set in the environment.  This is
-#     used  as a check to see if vcvars32.bat had been run prior to running
-#     nmake or during the installation of Microsoft Visual C++, MSVCDir had
-#     been set globally and the PATH adjusted.  Either way is valid.
-#
-#     You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
-#     directory to setup the proper environment, if needed, for your current
-#     setup.  This is a needed bootstrap requirement and allows the swapping of
-#     different environments to be easier.
-#
-# 2)  To use the Platform SDK (not expressly needed), run setenv.bat after
-#     vcvars32.bat according to the instructions for it.  This can also turn on
-#     the 64-bit compiler, if your SDK has it.
-#
-# 3)  Targets are:
-#	all       -- Builds everything.
-#       <project> -- Builds the project (eg: nmake sample)
-#	test      -- Builds and runs the test suite.
-#	install   -- Installs the built binaries and libraries to $(INSTALLDIR)
-#		     in an appropriate subdirectory.
-#	clean/realclean/distclean -- varying levels of cleaning.
-#
-# 4)  Macros usable on the commandline:
-#	INSTALLDIR=<path>
-#		Sets where to install Tcl from the built binaries.
-#		C:\Progra~1\Tcl is assumed when not specified.
-#
-#	OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none
-#		Sets special options for the core.  The default is for none.
-#		Any combination of the above may be used (comma separated).
-#		'none' will over-ride everything to nothing.
-#
-#		static  =  Builds a static library of the core instead of a
-#			   dll.  The shell will be static (and large), as well.
-#		msvcrt  =  Effects the static option only to switch it from
-#			   using libcmt(d) as the C runtime [by default] to
-#			   msvcrt(d). This is useful for static embedding
-#			   support.
-#		staticpkg = Effects the static option only to switch
-#			   tclshXX.exe to have the dde and reg extension linked
-#			   inside it.
-#		threads =  Turns on full multithreading support.
-#		thrdalloc = Use the thread allocator (shared global free pool).
-#		symbols =  Adds symbols for step debugging.
-#		profile =  Adds profiling hooks.  Map file is assumed.
-#		loimpact =  Adds a flag for how NT treats the heap to keep memory
-#			   in use, low.  This is said to impact alloc performance.
-#
-#	STATS=memdbg,compdbg,none
-#		Sets optional memory and bytecode compiler debugging code added
-#		to the core.  The default is for none.  Any combination of the
-#		above may be used (comma separated).  'none' will over-ride
-#		everything to nothing.
-#
-#		memdbg   = Enables the debugging memory allocator.
-#		compdbg  = Enables byte compilation logging.
-#
-#	MACHINE=(IX86|IA64|ALPHA)
-#		Set the machine type used for the compiler, linker, and
-#		resource compiler.  This hook is needed to tell the tools
-#		when alternate platforms are requested.  IX86 is the default
-#		when not specified.
-#
-#	TMP_DIR=<path>
-#	OUT_DIR=<path>
-#		Hooks to allow the intermediate and output directories to be
-#		changed.  $(OUT_DIR) is assumed to be 
-#		$(BINROOT)\(Release|Debug) based on if symbols are requested.
-#		$(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
-#
-#	TESTPAT=<file>
-#		Reads the tests requested to be run from this file.
-#
-#	CFG_ENCODING=encoding
-#		name of encoding for configuration information. Defaults
-#		to cp1252
-#
-# 5)  Examples:
-#
-#	Basic syntax of calling nmake looks like this:
-#	nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
-#
-#                        Standard (no frills)
-#       c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
-#       Setting environment for using Microsoft Visual C++ tools.
-#       c:\tcl_src\win\>nmake -f makefile.vc all
-#       c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
-#
-#                         Building for Win64
-#       c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
-#       Setting environment for using Microsoft Visual C++ tools.
-#       c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
-#       Targeting Windows pre64 RETAIL
-#       c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64
-#
-#------------------------------------------------------------------------------
-#==============================================================================
-###############################################################################
-#------------------------------------------------------------------------------
-
-!if !exist("makefile.vc")
-MSG = ^
-You must run this makefile only from the directory it is in.^
-Please `cd` to its location first.
-!error $(MSG)
-!endif
-
-#-------------------------------------------------------------------------
-# Project specific information (EDIT)
-#
-# You should edit this with the name and version of your project. This
-# information is used to generate the name of the package library and
-# it's install location.
-#
-# For example, the sample extension is  going to build sample04.dll and
-# would install it into $(INSTALLDIR)\lib\sample04
-#
-# You need to specify the object files that need to be linked into your
-# binary here.
-#
-#-------------------------------------------------------------------------
-
-PROJECT = sqlite3
-!include "rules.vc"
-
-# nmakehelp -V <file> <tag> will search the file for tag, skips until a
-#	number and returns all character until a character not in [0-9.ab]
-#	is read.
-
-!if [echo REM = This file is generated from Makefile.vc > versions.vc]
-!endif
-# get project version from row "AC_INIT([sqlite], [3.7.14])"
-!if [echo DOTVERSION = \>> versions.vc] \
-   && [nmakehlp -V ..\configure.in AC_INIT >> versions.vc]
-!endif
-!include "versions.vc"
-
-VERSION         = $(DOTVERSION:.=)
-STUBPREFIX      = $(PROJECT)stub
-
-DLLOBJS = \
-	$(TMP_DIR)\tclsqlite3.obj
-
-#-------------------------------------------------------------------------
-# Target names and paths ( shouldn't need changing )
-#-------------------------------------------------------------------------
-
-BINROOT		= .
-ROOT            = ..
-
-PRJIMPLIB	= $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
-PRJLIBNAME	= $(PROJECT)$(VERSION)$(SUFX).$(EXT)
-PRJLIB		= $(OUT_DIR)\$(PRJLIBNAME)
-
-PRJSTUBLIBNAME	= $(STUBPREFIX)$(VERSION).lib
-PRJSTUBLIB	= $(OUT_DIR)\$(PRJSTUBLIBNAME)
-
-### Make sure we use backslash only.
-PRJ_INSTALL_DIR         = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION)
-LIB_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
-BIN_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
-DOC_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
-SCRIPT_INSTALL_DIR	= $(PRJ_INSTALL_DIR)
-INCLUDE_INSTALL_DIR	= $(_TCLDIR)\include
-
-### The following paths CANNOT have spaces in them.
-GENERICDIR	= $(ROOT)\generic
-WINDIR		= $(ROOT)\win
-LIBDIR          = $(ROOT)\library
-DOCDIR		= $(ROOT)\doc
-TOOLSDIR	= $(ROOT)\tools
-COMPATDIR	= $(ROOT)\compat
-
-#---------------------------------------------------------------------
-# Compile flags
-#---------------------------------------------------------------------
-
-!if !$(DEBUG)
-!if $(OPTIMIZING)
-### This cranks the optimization level to maximize speed
-cdebug	= -O2 -Op -Gs
-!else
-cdebug	=
-!endif
-!else if "$(MACHINE)" == "IA64"
-### Warnings are too many, can't support warnings into errors.
-cdebug	= -Z7 -Od -GZ
-!else
-cdebug	= -Z7 -WX -Od -GZ
-!endif
-
-### Declarations common to all compiler options
-cflags = -nologo -c -W3 -YX -Fp$(TMP_DIR)^\
-
-!if $(MSVCRT)
-!if $(DEBUG)
-crt = -MDd
-!else
-crt = -MD
-!endif
-!else
-!if $(DEBUG)
-crt = -MTd
-!else
-crt = -MT
-!endif
-!endif
-
-INCLUDES	= $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)" \
-                  -I"$(ROOT)\.."
-BASE_CLFAGS	= $(cflags) $(cdebug) $(crt) $(INCLUDES) \
-                  -DSQLITE_3_SUFFIX_ONLY=1 -DSQLITE_ENABLE_RTREE=1 \
-                  -DSQLITE_ENABLE_FTS3=1 -DSQLITE_OMIT_DEPRECATED=1
-CON_CFLAGS	= $(cflags) $(cdebug) $(crt) -DCONSOLE -DSQLITE_ENABLE_FTS3=1
-TCL_CFLAGS	= -DBUILD_sqlite -DUSE_TCL_STUBS \
-                  -DPACKAGE_VERSION="\"$(DOTVERSION)\"" $(BASE_CLFAGS) \
-                  $(OPTDEFINES)
-
-#---------------------------------------------------------------------
-# Link flags
-#---------------------------------------------------------------------
-
-!if $(DEBUG)
-ldebug	= -debug:full -debugtype:cv
-!else
-ldebug	= -release -opt:ref -opt:icf,3
-!endif
-
-### Declarations common to all linker options
-lflags	= -nologo -machine:$(MACHINE) $(ldebug)
-
-!if $(PROFILE)
-lflags	= $(lflags) -profile
-!endif
-
-!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
-### Align sections for PE size savings.
-lflags	= $(lflags) -opt:nowin98
-!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
-### Align sections for speed in loading by choosing the virtual page size.
-lflags	= $(lflags) -align:4096
-!endif
-
-!if $(LOIMPACT)
-lflags	= $(lflags) -ws:aggressive
-!endif
-
-dlllflags = $(lflags) -dll
-conlflags = $(lflags) -subsystem:console
-guilflags = $(lflags) -subsystem:windows
-baselibs   = $(TCLSTUBLIB)
-
-#---------------------------------------------------------------------
-# TclTest flags
-#---------------------------------------------------------------------
-
-!IF "$(TESTPAT)" != ""
-TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
-!ENDIF
-
-#---------------------------------------------------------------------
-# Project specific targets (EDIT)
-#---------------------------------------------------------------------
-
-all:	    setup $(PROJECT)
-$(PROJECT): setup $(PRJLIB)
-install:    install-binaries install-libraries install-docs
-
-# Tests need to ensure we load the right dll file we
-# have to handle the output differently on Win9x.
-#
-!if "$(OS)" == "Windows_NT"  || "$(MSVCDIR)" == "IDE"
-test: setup $(PROJECT)
-        set TCL_LIBRARY=$(ROOT)/library
-        $(TCLSH) <<
-load $(PRJLIB:\=/)
-cd "$(ROOT)/tests"
-set argv "$(TESTFLAGS)"
-source all.tcl
-<<
-!else
-test: setup $(PROJECT)
-        echo Please wait while the test results are collected
-        set TCL_LIBRARY=$(ROOT)/library
-        $(TCLSH) << >tests.log
-load $(PRJLIB:\=/)
-cd "$(ROOT)/tests"
-set argv "$(TESTFLAGS)"
-source all.tcl
-<<
-        type tests.log | more
-!endif
-
-setup:
-	@if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
-	@if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)
-
-$(PRJLIB): $(DLLOBJS)
-	$(link32) $(dlllflags) -out:$@ $(baselibs) @<<
-$**
-<<
-	-@del $*.exp
-
-$(PRJSTUBLIB): $(PRJSTUBOBJS)
-	$(lib32) -nologo -out:$@ $(PRJSTUBOBJS)
-
-#---------------------------------------------------------------------
-# Implicit rules
-#---------------------------------------------------------------------
-
-{$(WINDIR)}.c{$(TMP_DIR)}.obj::
-    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
-$<
-<<
-
-{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
-    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
-$<
-<<
-
-{$(COMPATDIR)}.c{$(TMP_DIR)}.obj::
-    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
-$<
-<<
-
-{$(WINDIR)}.rc{$(TMP_DIR)}.res:
-	$(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \
-!if $(DEBUG)
-	-d DEBUG \
-!endif
-!if $(TCL_THREADS)
-	-d TCL_THREADS \
-!endif
-!if $(STATIC_BUILD)
-	-d STATIC_BUILD \
-!endif
-	$<
-
-.SUFFIXES:
-.SUFFIXES:.c .rc
-
-#---------------------------------------------------------------------
-# Installation. (EDIT)
-#
-# You may need to modify this section to reflect the final distribution
-# of your files and possibly to generate documentation.
-#
-#---------------------------------------------------------------------
-
-install-binaries:
-	@echo Installing binaries to '$(SCRIPT_INSTALL_DIR)'
-	@if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)"
-	@$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL
-
-install-libraries:
-        @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)'
-        @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)"
-        @echo Installing package index in '$(SCRIPT_INSTALL_DIR)'
-        @type << >"$(SCRIPT_INSTALL_DIR)\pkgIndex.tcl"
-package ifneeded $(PROJECT) $(DOTVERSION) \
-    [list load [file join $$dir $(PRJLIBNAME)] sqlite3]
-<<
-
-install-docs:
-	@echo Installing documentation files to '$(DOC_INSTALL_DIR)'
-	@if exist $(DOCDIR) $(CPY) $(DOCDIR)\*.n "$(DOC_INSTALL_DIR)"
-
-#---------------------------------------------------------------------
-# Clean up
-#---------------------------------------------------------------------
-
-clean:
-	@if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)
-	@if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc
-
-realclean: clean
-	@if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)
-
-distclean: realclean
-	@if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
-	@if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj
diff --git a/components/external/SQLite-3.8.1/autoconf/tea/win/nmakehlp.c b/components/external/SQLite-3.8.1/autoconf/tea/win/nmakehlp.c
deleted file mode 100644
index 2868857efd..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/tea/win/nmakehlp.c
+++ /dev/null
@@ -1,694 +0,0 @@
-/*
- * ----------------------------------------------------------------------------
- * nmakehlp.c --
- *
- *	This is used to fix limitations within nmake and the environment.
- *
- * Copyright (c) 2002 by David Gravereaux.
- * Copyright (c) 2006 by Pat Thoyts
- *
- * See the file "license.terms" for information on usage and redistribution of
- * this file, and for a DISCLAIMER OF ALL WARRANTIES.
- * ----------------------------------------------------------------------------
- */
-
-#define _CRT_SECURE_NO_DEPRECATE
-#include <windows.h>
-#define NO_SHLWAPI_GDI
-#define NO_SHLWAPI_STREAM
-#define NO_SHLWAPI_REG
-#include <shlwapi.h>
-#pragma comment (lib, "user32.lib")
-#pragma comment (lib, "kernel32.lib")
-#pragma comment (lib, "shlwapi.lib")
-#include <stdio.h>
-#include <math.h>
-
-/*
- * This library is required for x64 builds with _some_ versions of MSVC
- */
-#if defined(_M_IA64) || defined(_M_AMD64)
-#if _MSC_VER >= 1400 && _MSC_VER < 1500
-#pragma comment(lib, "bufferoverflowU")
-#endif
-#endif
-
-/* ISO hack for dumb VC++ */
-#ifdef _MSC_VER
-#define   snprintf	_snprintf
-#endif
-
-
-
-/* protos */
-
-static int CheckForCompilerFeature(const char *option);
-static int CheckForLinkerFeature(const char *option);
-static int IsIn(const char *string, const char *substring);
-static int SubstituteFile(const char *substs, const char *filename);
-static int QualifyPath(const char *path);
-static const char *GetVersionFromFile(const char *filename, const char *match);
-static DWORD WINAPI ReadFromPipe(LPVOID args);
-
-/* globals */
-
-#define CHUNK	25
-#define STATICBUFFERSIZE    1000
-typedef struct {
-    HANDLE pipe;
-    char buffer[STATICBUFFERSIZE];
-} pipeinfo;
-
-pipeinfo Out = {INVALID_HANDLE_VALUE, '\0'};
-pipeinfo Err = {INVALID_HANDLE_VALUE, '\0'};
-
-/*
- * exitcodes: 0 == no, 1 == yes, 2 == error
- */
-
-int
-main(
-    int argc,
-    char *argv[])
-{
-    char msg[300];
-    DWORD dwWritten;
-    int chars;
-
-    /*
-     * Make sure children (cl.exe and link.exe) are kept quiet.
-     */
-
-    SetErrorMode(SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX);
-
-    /*
-     * Make sure the compiler and linker aren't effected by the outside world.
-     */
-
-    SetEnvironmentVariable("CL", "");
-    SetEnvironmentVariable("LINK", "");
-
-    if (argc > 1 && *argv[1] == '-') {
-	switch (*(argv[1]+1)) {
-	case 'c':
-	    if (argc != 3) {
-		chars = snprintf(msg, sizeof(msg) - 1,
-		        "usage: %s -c <compiler option>\n"
-			"Tests for whether cl.exe supports an option\n"
-			"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
-		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
-			&dwWritten, NULL);
-		return 2;
-	    }
-	    return CheckForCompilerFeature(argv[2]);
-	case 'l':
-	    if (argc != 3) {
-		chars = snprintf(msg, sizeof(msg) - 1,
-	       		"usage: %s -l <linker option>\n"
-			"Tests for whether link.exe supports an option\n"
-			"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
-		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
-			&dwWritten, NULL);
-		return 2;
-	    }
-	    return CheckForLinkerFeature(argv[2]);
-	case 'f':
-	    if (argc == 2) {
-		chars = snprintf(msg, sizeof(msg) - 1,
-			"usage: %s -f <string> <substring>\n"
-			"Find a substring within another\n"
-			"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
-		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
-			&dwWritten, NULL);
-		return 2;
-	    } else if (argc == 3) {
-		/*
-		 * If the string is blank, there is no match.
-		 */
-
-		return 0;
-	    } else {
-		return IsIn(argv[2], argv[3]);
-	    }
-	case 's':
-	    if (argc == 2) {
-		chars = snprintf(msg, sizeof(msg) - 1,
-			"usage: %s -s <substitutions file> <file>\n"
-			"Perform a set of string map type substutitions on a file\n"
-			"exitcodes: 0\n",
-			argv[0]);
-		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
-			&dwWritten, NULL);
-		return 2;
-	    }
-	    return SubstituteFile(argv[2], argv[3]);
-	case 'V':
-	    if (argc != 4) {
-		chars = snprintf(msg, sizeof(msg) - 1,
-		    "usage: %s -V filename matchstring\n"
-		    "Extract a version from a file:\n"
-		    "eg: pkgIndex.tcl \"package ifneeded http\"",
-		    argv[0]);
-		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
-		    &dwWritten, NULL);
-		return 0;
-	    }
-	    printf("%s\n", GetVersionFromFile(argv[2], argv[3]));
-	    return 0;
-	case 'Q':
-	    if (argc != 3) {
-		chars = snprintf(msg, sizeof(msg) - 1,
-		    "usage: %s -Q path\n"
-		    "Emit the fully qualified path\n"
-		    "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
-		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
-		    &dwWritten, NULL);
-		return 2;
-	    }
-	    return QualifyPath(argv[2]);
-	}
-    }
-    chars = snprintf(msg, sizeof(msg) - 1,
-	    "usage: %s -c|-f|-l|-Q|-s|-V ...\n"
-	    "This is a little helper app to equalize shell differences between WinNT and\n"
-	    "Win9x and get nmake.exe to accomplish its job.\n",
-	    argv[0]);
-    WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
-    return 2;
-}
-
-static int
-CheckForCompilerFeature(
-    const char *option)
-{
-    STARTUPINFO si;
-    PROCESS_INFORMATION pi;
-    SECURITY_ATTRIBUTES sa;
-    DWORD threadID;
-    char msg[300];
-    BOOL ok;
-    HANDLE hProcess, h, pipeThreads[2];
-    char cmdline[100];
-
-    hProcess = GetCurrentProcess();
-
-    ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
-    ZeroMemory(&si, sizeof(STARTUPINFO));
-    si.cb = sizeof(STARTUPINFO);
-    si.dwFlags   = STARTF_USESTDHANDLES;
-    si.hStdInput = INVALID_HANDLE_VALUE;
-
-    ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
-    sa.nLength = sizeof(SECURITY_ATTRIBUTES);
-    sa.lpSecurityDescriptor = NULL;
-    sa.bInheritHandle = FALSE;
-
-    /*
-     * Create a non-inheritible pipe.
-     */
-
-    CreatePipe(&Out.pipe, &h, &sa, 0);
-
-    /*
-     * Dupe the write side, make it inheritible, and close the original.
-     */
-
-    DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE,
-	    DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
-
-    /*
-     * Same as above, but for the error side.
-     */
-
-    CreatePipe(&Err.pipe, &h, &sa, 0);
-    DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE,
-	    DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
-
-    /*
-     * Base command line.
-     */
-
-    lstrcpy(cmdline, "cl.exe -nologo -c -TC -Zs -X -Fp.\\_junk.pch ");
-
-    /*
-     * Append our option for testing
-     */
-
-    lstrcat(cmdline, option);
-
-    /*
-     * Filename to compile, which exists, but is nothing and empty.
-     */
-
-    lstrcat(cmdline, " .\\nul");
-
-    ok = CreateProcess(
-	    NULL,	    /* Module name. */
-	    cmdline,	    /* Command line. */
-	    NULL,	    /* Process handle not inheritable. */
-	    NULL,	    /* Thread handle not inheritable. */
-	    TRUE,	    /* yes, inherit handles. */
-	    DETACHED_PROCESS, /* No console for you. */
-	    NULL,	    /* Use parent's environment block. */
-	    NULL,	    /* Use parent's starting directory. */
-	    &si,	    /* Pointer to STARTUPINFO structure. */
-	    &pi);	    /* Pointer to PROCESS_INFORMATION structure. */
-
-    if (!ok) {
-	DWORD err = GetLastError();
-	int chars = snprintf(msg, sizeof(msg) - 1,
-		"Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
-
-	FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS|
-		FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars],
-		(300-chars), 0);
-	WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, lstrlen(msg), &err,NULL);
-	return 2;
-    }
-
-    /*
-     * Close our references to the write handles that have now been inherited.
-     */
-
-    CloseHandle(si.hStdOutput);
-    CloseHandle(si.hStdError);
-
-    WaitForInputIdle(pi.hProcess, 5000);
-    CloseHandle(pi.hThread);
-
-    /*
-     * Start the pipe reader threads.
-     */
-
-    pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
-    pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
-
-    /*
-     * Block waiting for the process to end.
-     */
-
-    WaitForSingleObject(pi.hProcess, INFINITE);
-    CloseHandle(pi.hProcess);
-
-    /*
-     * Wait for our pipe to get done reading, should it be a little slow.
-     */
-
-    WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
-    CloseHandle(pipeThreads[0]);
-    CloseHandle(pipeThreads[1]);
-
-    /*
-     * Look for the commandline warning code in both streams.
-     *  - in MSVC 6 & 7 we get D4002, in MSVC 8 we get D9002.
-     */
-
-    return !(strstr(Out.buffer, "D4002") != NULL
-             || strstr(Err.buffer, "D4002") != NULL
-             || strstr(Out.buffer, "D9002") != NULL
-             || strstr(Err.buffer, "D9002") != NULL
-             || strstr(Out.buffer, "D2021") != NULL
-             || strstr(Err.buffer, "D2021") != NULL);
-}
-
-static int
-CheckForLinkerFeature(
-    const char *option)
-{
-    STARTUPINFO si;
-    PROCESS_INFORMATION pi;
-    SECURITY_ATTRIBUTES sa;
-    DWORD threadID;
-    char msg[300];
-    BOOL ok;
-    HANDLE hProcess, h, pipeThreads[2];
-    char cmdline[100];
-
-    hProcess = GetCurrentProcess();
-
-    ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
-    ZeroMemory(&si, sizeof(STARTUPINFO));
-    si.cb = sizeof(STARTUPINFO);
-    si.dwFlags   = STARTF_USESTDHANDLES;
-    si.hStdInput = INVALID_HANDLE_VALUE;
-
-    ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
-    sa.nLength = sizeof(SECURITY_ATTRIBUTES);
-    sa.lpSecurityDescriptor = NULL;
-    sa.bInheritHandle = TRUE;
-
-    /*
-     * Create a non-inheritible pipe.
-     */
-
-    CreatePipe(&Out.pipe, &h, &sa, 0);
-
-    /*
-     * Dupe the write side, make it inheritible, and close the original.
-     */
-
-    DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE,
-	    DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
-
-    /*
-     * Same as above, but for the error side.
-     */
-
-    CreatePipe(&Err.pipe, &h, &sa, 0);
-    DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE,
-	    DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
-
-    /*
-     * Base command line.
-     */
-
-    lstrcpy(cmdline, "link.exe -nologo ");
-
-    /*
-     * Append our option for testing.
-     */
-
-    lstrcat(cmdline, option);
-
-    ok = CreateProcess(
-	    NULL,	    /* Module name. */
-	    cmdline,	    /* Command line. */
-	    NULL,	    /* Process handle not inheritable. */
-	    NULL,	    /* Thread handle not inheritable. */
-	    TRUE,	    /* yes, inherit handles. */
-	    DETACHED_PROCESS, /* No console for you. */
-	    NULL,	    /* Use parent's environment block. */
-	    NULL,	    /* Use parent's starting directory. */
-	    &si,	    /* Pointer to STARTUPINFO structure. */
-	    &pi);	    /* Pointer to PROCESS_INFORMATION structure. */
-
-    if (!ok) {
-	DWORD err = GetLastError();
-	int chars = snprintf(msg, sizeof(msg) - 1,
-		"Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
-
-	FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS|
-		FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars],
-		(300-chars), 0);
-	WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, lstrlen(msg), &err,NULL);
-	return 2;
-    }
-
-    /*
-     * Close our references to the write handles that have now been inherited.
-     */
-
-    CloseHandle(si.hStdOutput);
-    CloseHandle(si.hStdError);
-
-    WaitForInputIdle(pi.hProcess, 5000);
-    CloseHandle(pi.hThread);
-
-    /*
-     * Start the pipe reader threads.
-     */
-
-    pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
-    pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
-
-    /*
-     * Block waiting for the process to end.
-     */
-
-    WaitForSingleObject(pi.hProcess, INFINITE);
-    CloseHandle(pi.hProcess);
-
-    /*
-     * Wait for our pipe to get done reading, should it be a little slow.
-     */
-
-    WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
-    CloseHandle(pipeThreads[0]);
-    CloseHandle(pipeThreads[1]);
-
-    /*
-     * Look for the commandline warning code in the stderr stream.
-     */
-
-    return !(strstr(Out.buffer, "LNK1117") != NULL ||
-	    strstr(Err.buffer, "LNK1117") != NULL ||
-	    strstr(Out.buffer, "LNK4044") != NULL ||
-	    strstr(Err.buffer, "LNK4044") != NULL);
-}
-
-static DWORD WINAPI
-ReadFromPipe(
-    LPVOID args)
-{
-    pipeinfo *pi = (pipeinfo *) args;
-    char *lastBuf = pi->buffer;
-    DWORD dwRead;
-    BOOL ok;
-
-  again:
-    if (lastBuf - pi->buffer + CHUNK > STATICBUFFERSIZE) {
-	CloseHandle(pi->pipe);
-	return (DWORD)-1;
-    }
-    ok = ReadFile(pi->pipe, lastBuf, CHUNK, &dwRead, 0L);
-    if (!ok || dwRead == 0) {
-	CloseHandle(pi->pipe);
-	return 0;
-    }
-    lastBuf += dwRead;
-    goto again;
-
-    return 0;  /* makes the compiler happy */
-}
-
-static int
-IsIn(
-    const char *string,
-    const char *substring)
-{
-    return (strstr(string, substring) != NULL);
-}
-
-/*
- * GetVersionFromFile --
- * 	Looks for a match string in a file and then returns the version
- * 	following the match where a version is anything acceptable to
- * 	package provide or package ifneeded.
- */
-
-static const char *
-GetVersionFromFile(
-    const char *filename,
-    const char *match)
-{
-    size_t cbBuffer = 100;
-    static char szBuffer[100];
-    char *szResult = NULL;
-    FILE *fp = fopen(filename, "rt");
-
-    if (fp != NULL) {
-	/*
-	 * Read data until we see our match string.
-	 */
-
-	while (fgets(szBuffer, cbBuffer, fp) != NULL) {
-	    LPSTR p, q;
-
-	    p = strstr(szBuffer, match);
-	    if (p != NULL) {
-		/*
-		 * Skip to first digit.
-		 */
-
-		while (*p && !isdigit(*p)) {
-		    ++p;
-		}
-
-		/*
-		 * Find ending whitespace.
-		 */
-
-		q = p;
-		while (*q && (isalnum(*q) || *q == '.')) {
-		    ++q;
-		}
-
-		memcpy(szBuffer, p, q - p);
-		szBuffer[q-p] = 0;
-		szResult = szBuffer;
-		break;
-	    }
-	}
-	fclose(fp);
-    }
-    return szResult;
-}
-
-/*
- * List helpers for the SubstituteFile function
- */
-
-typedef struct list_item_t {
-    struct list_item_t *nextPtr;
-    char * key;
-    char * value;
-} list_item_t;
-
-/* insert a list item into the list (list may be null) */
-static list_item_t *
-list_insert(list_item_t **listPtrPtr, const char *key, const char *value)
-{
-    list_item_t *itemPtr = malloc(sizeof(list_item_t));
-    if (itemPtr) {
-	itemPtr->key = strdup(key);
-	itemPtr->value = strdup(value);
-	itemPtr->nextPtr = NULL;
-
-	while(*listPtrPtr) {
-	    listPtrPtr = &(*listPtrPtr)->nextPtr;
-	}
-	*listPtrPtr = itemPtr;
-    }
-    return itemPtr;
-}
-
-static void
-list_free(list_item_t **listPtrPtr)
-{
-    list_item_t *tmpPtr, *listPtr = *listPtrPtr;
-    while (listPtr) {
-	tmpPtr = listPtr;
-	listPtr = listPtr->nextPtr;
-	free(tmpPtr->key);
-	free(tmpPtr->value);
-	free(tmpPtr);
-    }
-}
-
-/*
- * SubstituteFile --
- *	As windows doesn't provide anything useful like sed and it's unreliable
- *	to use the tclsh you are building against (consider x-platform builds -
- *	eg compiling AMD64 target from IX86) we provide a simple substitution
- *	option here to handle autoconf style substitutions.
- *	The substitution file is whitespace and line delimited. The file should
- *	consist of lines matching the regular expression:
- *	  \s*\S+\s+\S*$
- *
- *	Usage is something like:
- *	  nmakehlp -S << $** > $@
- *        @PACKAGE_NAME@ $(PACKAGE_NAME)
- *        @PACKAGE_VERSION@ $(PACKAGE_VERSION)
- *        <<
- */
-
-static int
-SubstituteFile(
-    const char *substitutions,
-    const char *filename)
-{
-    size_t cbBuffer = 1024;
-    static char szBuffer[1024], szCopy[1024];
-    char *szResult = NULL;
-    list_item_t *substPtr = NULL;
-    FILE *fp, *sp;
-
-    fp = fopen(filename, "rt");
-    if (fp != NULL) {
-
-	/*
-	 * Build a list of substutitions from the first filename
-	 */
-
-	sp = fopen(substitutions, "rt");
-	if (sp != NULL) {
-	    while (fgets(szBuffer, cbBuffer, sp) != NULL) {
-		char *ks, *ke, *vs, *ve;
-		ks = szBuffer;
-		while (ks && *ks && isspace(*ks)) ++ks;
-		ke = ks;
-		while (ke && *ke && !isspace(*ke)) ++ke;
-		vs = ke;
-		while (vs && *vs && isspace(*vs)) ++vs;
-		ve = vs;
-		while (ve && *ve && !(*ve == '\r' || *ve == '\n')) ++ve;
-		*ke = 0, *ve = 0;
-		list_insert(&substPtr, ks, vs);
-	    }
-	    fclose(sp);
-	}
-
-	/* debug: dump the list */
-#ifdef _DEBUG
-	{
-	    int n = 0;
-	    list_item_t *p = NULL;
-	    for (p = substPtr; p != NULL; p = p->nextPtr, ++n) {
-		fprintf(stderr, "% 3d '%s' => '%s'\n", n, p->key, p->value);
-	    }
-	}
-#endif
-	
-	/*
-	 * Run the substitutions over each line of the input
-	 */
-	
-	while (fgets(szBuffer, cbBuffer, fp) != NULL) {
-	    list_item_t *p = NULL;
-	    for (p = substPtr; p != NULL; p = p->nextPtr) {
-		char *m = strstr(szBuffer, p->key);
-		if (m) {
-		    char *cp, *op, *sp;
-		    cp = szCopy;
-		    op = szBuffer;
-		    while (op != m) *cp++ = *op++;
-		    sp = p->value;
-		    while (sp && *sp) *cp++ = *sp++;
-		    op += strlen(p->key);
-		    while (*op) *cp++ = *op++;
-		    *cp = 0;
-		    memcpy(szBuffer, szCopy, sizeof(szCopy));
-		}
-	    }
-	    printf(szBuffer);
-	}
-	
-	list_free(&substPtr);
-    }
-    fclose(fp);
-    return 0;
-}
-
-/*
- * QualifyPath --
- *
- *	This composes the current working directory with a provided path
- *	and returns the fully qualified and normalized path.
- *	Mostly needed to setup paths for testing.
- */
-
-static int
-QualifyPath(
-    const char *szPath)
-{
-    char szCwd[MAX_PATH + 1];
-    char szTmp[MAX_PATH + 1];
-    char *p;
-    GetCurrentDirectory(MAX_PATH, szCwd);
-    while ((p = strchr(szPath, '/')) && *p)
-	*p = '\\';
-    PathCombine(szTmp, szCwd, szPath);
-    PathCanonicalize(szCwd, szTmp);
-    printf("%s\n", szCwd);
-    return 0;
-}
-
-/*
- * Local variables:
- *   mode: c
- *   c-basic-offset: 4
- *   fill-column: 78
- *   indent-tabs-mode: t
- *   tab-width: 8
- * End:
- */
diff --git a/components/external/SQLite-3.8.1/autoconf/tea/win/rules.vc b/components/external/SQLite-3.8.1/autoconf/tea/win/rules.vc
deleted file mode 100644
index 99471053c8..0000000000
--- a/components/external/SQLite-3.8.1/autoconf/tea/win/rules.vc
+++ /dev/null
@@ -1,711 +0,0 @@
-#------------------------------------------------------------------------------
-# rules.vc --
-#
-#	Microsoft Visual C++ makefile include for decoding the commandline
-#	macros.  This file does not need editing to build Tcl.
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-#
-# Copyright (c) 2001-2003 David Gravereaux.
-# Copyright (c) 2003-2008 Patrick Thoyts
-#------------------------------------------------------------------------------
-
-!ifndef _RULES_VC
-_RULES_VC = 1
-
-cc32		= $(CC)   # built-in default.
-link32		= link
-lib32		= lib
-rc32		= $(RC)   # built-in default.
-
-!ifndef INSTALLDIR
-### Assume the normal default.
-_INSTALLDIR	= C:\Program Files\Tcl
-!else
-### Fix the path separators.
-_INSTALLDIR	= $(INSTALLDIR:/=\)
-!endif
-
-#----------------------------------------------------------
-# Set the proper copy method to avoid overwrite questions
-# to the user when copying files and selecting the right
-# "delete all" method.
-#----------------------------------------------------------
-
-!if "$(OS)" == "Windows_NT"
-RMDIR	= rmdir /S /Q
-ERRNULL  = 2>NUL
-!if ![ver | find "4.0" > nul]
-CPY	= echo y | xcopy /i >NUL
-COPY	= copy >NUL
-!else
-CPY	= xcopy /i /y >NUL
-COPY	= copy /y >NUL
-!endif
-!else # "$(OS)" != "Windows_NT"
-CPY	= xcopy /i >_JUNK.OUT # On Win98 NUL does not work here.
-COPY	= copy >_JUNK.OUT # On Win98 NUL does not work here.
-RMDIR	= deltree /Y
-NULL    = \NUL # Used in testing directory existence
-ERRNULL = >NUL # Win9x shell cannot redirect stderr
-!endif
-MKDIR   = mkdir
-
-#------------------------------------------------------------------------------
-# Determine the host and target architectures and compiler version.
-#------------------------------------------------------------------------------
-
-_HASH=^#
-_VC_MANIFEST_EMBED_EXE=
-_VC_MANIFEST_EMBED_DLL=
-VCVER=0
-!if ![echo VCVERSION=_MSC_VER > vercl.x] \
-    && ![echo $(_HASH)if defined(_M_IX86) >> vercl.x] \
-    && ![echo ARCH=IX86 >> vercl.x] \
-    && ![echo $(_HASH)elif defined(_M_AMD64) >> vercl.x] \
-    && ![echo ARCH=AMD64 >> vercl.x] \
-    && ![echo $(_HASH)endif >> vercl.x] \
-    && ![cl -nologo -TC -P vercl.x $(ERRNULL)]
-!include vercl.i
-!if ![echo VCVER= ^\> vercl.vc] \
-    && ![set /a $(VCVERSION) / 100 - 6 >> vercl.vc]
-!include vercl.vc
-!endif
-!endif
-!if ![del $(ERRNUL) /q/f vercl.x vercl.i vercl.vc]
-!endif
-
-!if ![reg query HKLM\Hardware\Description\System\CentralProcessor\0 /v Identifier | findstr /i x86]
-NATIVE_ARCH=IX86
-!else
-NATIVE_ARCH=AMD64
-!endif
-
-# Since MSVC8 we must deal with manifest resources.
-!if $(VCVERSION) >= 1400
-_VC_MANIFEST_EMBED_EXE=if exist [email protected] mt -nologo -manifest [email protected] -outputresource:$@;1
-_VC_MANIFEST_EMBED_DLL=if exist [email protected] mt -nologo -manifest [email protected] -outputresource:$@;2
-!endif
-
-!ifndef MACHINE
-MACHINE=$(ARCH)
-!endif
-
-!ifndef CFG_ENCODING
-CFG_ENCODING	= \"cp1252\"
-!endif
-
-!message ===============================================================================
-
-#----------------------------------------------------------
-# build the helper app we need to overcome nmake's limiting
-# environment.
-#----------------------------------------------------------
-
-!if !exist(nmakehlp.exe)
-!if [$(cc32) -nologo nmakehlp.c -link -subsystem:console > nul]
-!endif
-!endif
-
-#----------------------------------------------------------
-# Test for compiler features
-#----------------------------------------------------------
-
-### test for optimizations
-!if [nmakehlp -c -Ot]
-!message *** Compiler has 'Optimizations'
-OPTIMIZING	= 1
-!else
-!message *** Compiler does not have 'Optimizations'
-OPTIMIZING	= 0
-!endif
-
-OPTIMIZATIONS   =
-
-!if [nmakehlp -c -Ot]
-OPTIMIZATIONS  = $(OPTIMIZATIONS) -Ot
-!endif
-
-!if [nmakehlp -c -Oi]
-OPTIMIZATIONS  = $(OPTIMIZATIONS) -Oi
-!endif
-
-!if [nmakehlp -c -Op]
-OPTIMIZATIONS  = $(OPTIMIZATIONS) -Op
-!endif
-
-!if [nmakehlp -c -fp:strict]
-OPTIMIZATIONS  = $(OPTIMIZATIONS) -fp:strict
-!endif
-
-!if [nmakehlp -c -Gs]
-OPTIMIZATIONS  = $(OPTIMIZATIONS) -Gs
-!endif
-
-!if [nmakehlp -c -GS]
-OPTIMIZATIONS  = $(OPTIMIZATIONS) -GS
-!endif
-
-!if [nmakehlp -c -GL]
-OPTIMIZATIONS  = $(OPTIMIZATIONS) -GL
-!endif
-
-DEBUGFLAGS     =
-
-!if [nmakehlp -c -RTC1]
-DEBUGFLAGS     = $(DEBUGFLAGS) -RTC1
-!elseif [nmakehlp -c -GZ]
-DEBUGFLAGS     = $(DEBUGFLAGS) -GZ
-!endif
-
-COMPILERFLAGS  =-W3 -DUNICODE -D_UNICODE
-
-# In v13 -GL and -YX are incompatible.
-!if [nmakehlp -c -YX]
-!if ![nmakehlp -c -GL]
-OPTIMIZATIONS  = $(OPTIMIZATIONS) -YX
-!endif
-!endif
-
-!if "$(MACHINE)" == "IX86"
-### test for pentium errata
-!if [nmakehlp -c -QI0f]
-!message *** Compiler has 'Pentium 0x0f fix'
-COMPILERFLAGS  = $(COMPILERFLAGS) -QI0f
-!else
-!message *** Compiler does not have 'Pentium 0x0f fix'
-!endif
-!endif
-
-!if "$(MACHINE)" == "IA64"
-### test for Itanium errata
-!if [nmakehlp -c -QIA64_Bx]
-!message *** Compiler has 'B-stepping errata workarounds'
-COMPILERFLAGS   = $(COMPILERFLAGS) -QIA64_Bx
-!else
-!message *** Compiler does not have 'B-stepping errata workarounds'
-!endif
-!endif
-
-!if "$(MACHINE)" == "IX86"
-### test for -align:4096, when align:512 will do.
-!if [nmakehlp -l -opt:nowin98]
-!message *** Linker has 'Win98 alignment problem'
-ALIGN98_HACK	= 1
-!else
-!message *** Linker does not have 'Win98 alignment problem'
-ALIGN98_HACK	= 0
-!endif
-!else
-ALIGN98_HACK	= 0
-!endif
-
-LINKERFLAGS     =
-
-!if [nmakehlp -l -ltcg]
-LINKERFLAGS     =-ltcg
-!endif
-
-#----------------------------------------------------------
-# Decode the options requested.
-#----------------------------------------------------------
-
-!if "$(OPTS)" == "" || [nmakehlp -f "$(OPTS)" "none"]
-STATIC_BUILD	= 0
-TCL_THREADS	= 1
-DEBUG		= 0
-SYMBOLS		= 0
-PROFILE		= 0
-PGO		= 0
-MSVCRT		= 0
-LOIMPACT	= 0
-TCL_USE_STATIC_PACKAGES	= 0
-USE_THREAD_ALLOC = 1
-UNCHECKED	= 0
-!else
-!if [nmakehlp -f $(OPTS) "static"]
-!message *** Doing static
-STATIC_BUILD	= 1
-!else
-STATIC_BUILD	= 0
-!endif
-!if [nmakehlp -f $(OPTS) "msvcrt"]
-!message *** Doing msvcrt
-MSVCRT		= 1
-!else
-MSVCRT		= 0
-!endif
-!if [nmakehlp -f $(OPTS) "staticpkg"]
-!message *** Doing staticpkg
-TCL_USE_STATIC_PACKAGES	= 1
-!else
-TCL_USE_STATIC_PACKAGES	= 0
-!endif
-!if [nmakehlp -f $(OPTS) "nothreads"]
-!message *** Compile explicitly for non-threaded tcl
-TCL_THREADS	= 0
-!else
-TCL_THREADS	= 1
-USE_THREAD_ALLOC= 1
-!endif
-!if [nmakehlp -f $(OPTS) "symbols"]
-!message *** Doing symbols
-DEBUG		= 1
-!else
-DEBUG		= 0
-!endif
-!if [nmakehlp -f $(OPTS) "pdbs"]
-!message *** Doing pdbs
-SYMBOLS		= 1
-!else
-SYMBOLS		= 0
-!endif
-!if [nmakehlp -f $(OPTS) "profile"]
-!message *** Doing profile
-PROFILE		= 1
-!else
-PROFILE		= 0
-!endif
-!if [nmakehlp -f $(OPTS) "pgi"]
-!message *** Doing profile guided optimization instrumentation
-PGO		= 1
-!elseif [nmakehlp -f $(OPTS) "pgo"]
-!message *** Doing profile guided optimization
-PGO		= 2
-!else
-PGO		= 0
-!endif
-!if [nmakehlp -f $(OPTS) "loimpact"]
-!message *** Doing loimpact
-LOIMPACT	= 1
-!else
-LOIMPACT	= 0
-!endif
-!if [nmakehlp -f $(OPTS) "thrdalloc"]
-!message *** Doing thrdalloc
-USE_THREAD_ALLOC = 1
-!endif
-!if [nmakehlp -f $(OPTS) "tclalloc"]
-!message *** Doing tclalloc
-USE_THREAD_ALLOC = 0
-!endif
-!if [nmakehlp -f $(OPTS) "unchecked"]
-!message *** Doing unchecked
-UNCHECKED = 1
-!else
-UNCHECKED = 0
-!endif
-!endif
-
-
-!if !$(STATIC_BUILD)
-# Make sure we don't build overly fat DLLs.
-MSVCRT		= 1
-# We shouldn't statically put the extensions inside the shell when dynamic.
-TCL_USE_STATIC_PACKAGES = 0
-!endif
-
-
-#----------------------------------------------------------
-# Figure-out how to name our intermediate and output directories.
-# We wouldn't want different builds to use the same .obj files
-# by accident.
-#----------------------------------------------------------
-
-#----------------------------------------
-# Naming convention:
-#   t = full thread support.
-#   s = static library (as opposed to an
-#	import library)
-#   g = linked to the debug enabled C
-#	run-time.
-#   x = special static build when it
-#	links to the dynamic C run-time.
-#----------------------------------------
-SUFX	    = tsgx
-
-!if $(DEBUG)
-BUILDDIRTOP = Debug
-!else
-BUILDDIRTOP = Release
-!endif
-
-!if "$(MACHINE)" != "IX86"
-BUILDDIRTOP =$(BUILDDIRTOP)_$(MACHINE)
-!endif
-!if $(VCVER) > 6
-BUILDDIRTOP =$(BUILDDIRTOP)_VC$(VCVER)
-!endif
-
-!if !$(DEBUG) || $(DEBUG) && $(UNCHECKED)
-SUFX	    = $(SUFX:g=)
-!endif
-
-TMP_DIRFULL = .\$(BUILDDIRTOP)\$(PROJECT)_ThreadedDynamicStaticX
-
-!if !$(STATIC_BUILD)
-TMP_DIRFULL = $(TMP_DIRFULL:Static=)
-SUFX	    = $(SUFX:s=)
-EXT	    = dll
-!if $(MSVCRT)
-TMP_DIRFULL = $(TMP_DIRFULL:X=)
-SUFX	    = $(SUFX:x=)
-!endif
-!else
-TMP_DIRFULL = $(TMP_DIRFULL:Dynamic=)
-EXT	    = lib
-!if !$(MSVCRT)
-TMP_DIRFULL = $(TMP_DIRFULL:X=)
-SUFX	    = $(SUFX:x=)
-!endif
-!endif
-
-!if !$(TCL_THREADS)
-TMP_DIRFULL = $(TMP_DIRFULL:Threaded=)
-SUFX	    = $(SUFX:t=)
-!endif
-
-!ifndef TMP_DIR
-TMP_DIR	    = $(TMP_DIRFULL)
-!ifndef OUT_DIR
-OUT_DIR	    = .\$(BUILDDIRTOP)
-!endif
-!else
-!ifndef OUT_DIR
-OUT_DIR	    = $(TMP_DIR)
-!endif
-!endif
-
-
-#----------------------------------------------------------
-# Decode the statistics requested.
-#----------------------------------------------------------
-
-!if "$(STATS)" == "" || [nmakehlp -f "$(STATS)" "none"]
-TCL_MEM_DEBUG	    = 0
-TCL_COMPILE_DEBUG   = 0
-!else
-!if [nmakehlp -f $(STATS) "memdbg"]
-!message *** Doing memdbg
-TCL_MEM_DEBUG	    = 1
-!else
-TCL_MEM_DEBUG	    = 0
-!endif
-!if [nmakehlp -f $(STATS) "compdbg"]
-!message *** Doing compdbg
-TCL_COMPILE_DEBUG   = 1
-!else
-TCL_COMPILE_DEBUG   = 0
-!endif
-!endif
-
-
-#----------------------------------------------------------
-# Decode the checks requested.
-#----------------------------------------------------------
-
-!if "$(CHECKS)" == "" || [nmakehlp -f "$(CHECKS)" "none"]
-TCL_NO_DEPRECATED	    = 0
-WARNINGS		    = -W3
-!else
-!if [nmakehlp -f $(CHECKS) "nodep"]
-!message *** Doing nodep check
-TCL_NO_DEPRECATED	    = 1
-!else
-TCL_NO_DEPRECATED	    = 0
-!endif
-!if [nmakehlp -f $(CHECKS) "fullwarn"]
-!message *** Doing full warnings check
-WARNINGS		    = -W4
-!if [nmakehlp -l -warn:3]
-LINKERFLAGS		    = $(LINKERFLAGS) -warn:3
-!endif
-!else
-WARNINGS		    = -W3
-!endif
-!if [nmakehlp -f $(CHECKS) "64bit"] && [nmakehlp -c -Wp64]
-!message *** Doing 64bit portability warnings
-WARNINGS		    = $(WARNINGS) -Wp64
-!endif
-!endif
-
-!if $(PGO) > 1
-!if [nmakehlp -l -ltcg:pgoptimize]
-LINKERFLAGS	= $(LINKERFLAGS:-ltcg=) -ltcg:pgoptimize
-!else
-MSG=^
-This compiler does not support profile guided optimization.
-!error $(MSG)
-!endif
-!elseif $(PGO) > 0
-!if [nmakehlp -l -ltcg:pginstrument]
-LINKERFLAGS	= $(LINKERFLAGS:-ltcg=) -ltcg:pginstrument
-!else
-MSG=^
-This compiler does not support profile guided optimization.
-!error $(MSG)
-!endif
-!endif
-
-#----------------------------------------------------------
-# Set our defines now armed with our options.
-#----------------------------------------------------------
-
-OPTDEFINES	= -DTCL_CFGVAL_ENCODING=$(CFG_ENCODING) -DSTDC_HEADERS
-
-!if $(TCL_MEM_DEBUG)
-OPTDEFINES	= $(OPTDEFINES) -DTCL_MEM_DEBUG
-!endif
-!if $(TCL_COMPILE_DEBUG)
-OPTDEFINES	= $(OPTDEFINES) -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS
-!endif
-!if $(TCL_THREADS)
-OPTDEFINES	= $(OPTDEFINES) -DTCL_THREADS=1
-!if $(USE_THREAD_ALLOC)
-OPTDEFINES	= $(OPTDEFINES) -DUSE_THREAD_ALLOC=1
-!endif
-!endif
-!if $(STATIC_BUILD)
-OPTDEFINES	= $(OPTDEFINES) -DSTATIC_BUILD
-!endif
-!if $(TCL_NO_DEPRECATED)
-OPTDEFINES	= $(OPTDEFINES) -DTCL_NO_DEPRECATED
-!endif
-
-!if !$(DEBUG)
-OPTDEFINES	= $(OPTDEFINES) -DNDEBUG
-!if $(OPTIMIZING)
-OPTDEFINES	= $(OPTDEFINES) -DTCL_CFG_OPTIMIZED
-!endif
-!endif
-!if $(PROFILE)
-OPTDEFINES	= $(OPTDEFINES) -DTCL_CFG_PROFILED
-!endif
-!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64"
-OPTDEFINES	= $(OPTDEFINES) -DTCL_CFG_DO64BIT
-!endif
-!if $(VCVERSION) < 1300
-OPTDEFINES	= $(OPTDEFINES) -DNO_STRTOI64
-!endif
-
-#----------------------------------------------------------
-# Locate the Tcl headers to build against
-#----------------------------------------------------------
-
-!if "$(PROJECT)" == "tcl"
-
-_TCL_H          = ..\generic\tcl.h
-
-!else
-
-# If INSTALLDIR set to tcl root dir then reset to the lib dir.
-!if exist("$(_INSTALLDIR)\include\tcl.h")
-_INSTALLDIR=$(_INSTALLDIR)\lib
-!endif
-
-!if !defined(TCLDIR)
-!if exist("$(_INSTALLDIR)\..\include\tcl.h")
-TCLINSTALL	= 1
-_TCLDIR		= $(_INSTALLDIR)\..
-_TCL_H          = $(_INSTALLDIR)\..\include\tcl.h
-TCLDIR          = $(_INSTALLDIR)\..
-!else
-MSG=^
-Failed to find tcl.h.  Set the TCLDIR macro.
-!error $(MSG)
-!endif
-!else
-_TCLDIR	= $(TCLDIR:/=\)
-!if exist("$(_TCLDIR)\include\tcl.h")
-TCLINSTALL	= 1
-_TCL_H          = $(_TCLDIR)\include\tcl.h
-!elseif exist("$(_TCLDIR)\generic\tcl.h")
-TCLINSTALL	= 0
-_TCL_H          = $(_TCLDIR)\generic\tcl.h
-!else
-MSG =^
-Failed to find tcl.h.  The TCLDIR macro does not appear correct.
-!error $(MSG)
-!endif
-!endif
-!endif
-
-#--------------------------------------------------------------
-# Extract various version numbers from tcl headers
-# The generated file is then included in the makefile.
-#--------------------------------------------------------------
-
-!if [echo REM = This file is generated from rules.vc > versions.vc]
-!endif
-!if [echo TCL_MAJOR_VERSION = \>> versions.vc] \
-   && [nmakehlp -V "$(_TCL_H)" TCL_MAJOR_VERSION >> versions.vc]
-!endif
-!if [echo TCL_MINOR_VERSION = \>> versions.vc] \
-   && [nmakehlp -V "$(_TCL_H)" TCL_MINOR_VERSION >> versions.vc]
-!endif
-!if [echo TCL_PATCH_LEVEL = \>> versions.vc] \
-   && [nmakehlp -V "$(_TCL_H)" TCL_PATCH_LEVEL >> versions.vc]
-!endif
-
-# If building the tcl core then we need additional package versions
-!if "$(PROJECT)" == "tcl"
-!if [echo PKG_HTTP_VER = \>> versions.vc] \
-   && [nmakehlp -V ..\library\http\pkgIndex.tcl http >> versions.vc]
-!endif
-!if [echo PKG_TCLTEST_VER = \>> versions.vc] \
-   && [nmakehlp -V ..\library\tcltest\pkgIndex.tcl tcltest >> versions.vc]
-!endif
-!if [echo PKG_MSGCAT_VER = \>> versions.vc] \
-   && [nmakehlp -V ..\library\msgcat\pkgIndex.tcl msgcat >> versions.vc]
-!endif
-!if [echo PKG_PLATFORM_VER = \>> versions.vc] \
-   && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform " >> versions.vc]
-!endif
-!if [echo PKG_SHELL_VER = \>> versions.vc] \
-   && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform::shell" >> versions.vc]
-!endif
-!if [echo PKG_DDE_VER = \>> versions.vc] \
-   && [nmakehlp -V ..\library\dde\pkgIndex.tcl "dde " >> versions.vc]
-!endif
-!if [echo PKG_REG_VER =\>> versions.vc] \
-   && [nmakehlp -V ..\library\reg\pkgIndex.tcl registry >> versions.vc]
-!endif
-!endif
-
-!include versions.vc
-
-#--------------------------------------------------------------
-# Setup tcl version dependent stuff headers
-#--------------------------------------------------------------
-
-!if "$(PROJECT)" != "tcl"
-
-TCL_VERSION	= $(TCL_MAJOR_VERSION)$(TCL_MINOR_VERSION)
-
-!if $(TCL_VERSION) < 81
-TCL_DOES_STUBS	= 0
-!else
-TCL_DOES_STUBS	= 1
-!endif
-
-!if $(TCLINSTALL)
-TCLSH		= "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX).exe"
-!if !exist($(TCLSH)) && $(TCL_THREADS)
-TCLSH           = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)t$(SUFX).exe"
-!endif
-TCLSTUBLIB	= "$(_TCLDIR)\lib\tclstub$(TCL_VERSION).lib"
-TCLIMPLIB	= "$(_TCLDIR)\lib\tcl$(TCL_VERSION)$(SUFX).lib"
-TCL_LIBRARY	= $(_TCLDIR)\lib
-TCLREGLIB	= "$(_TCLDIR)\lib\tclreg13$(SUFX:t=).lib"
-TCLDDELIB	= "$(_TCLDIR)\lib\tcldde14$(SUFX:t=).lib"
-COFFBASE	= \must\have\tcl\sources\to\build\this\target
-TCLTOOLSDIR	= \must\have\tcl\sources\to\build\this\target
-TCL_INCLUDES    = -I"$(_TCLDIR)\include"
-!else
-TCLSH		= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX).exe"
-!if !exist($(TCLSH)) && $(TCL_THREADS)
-TCLSH		= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)t$(SUFX).exe"
-!endif
-TCLSTUBLIB	= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib"
-TCLIMPLIB	= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX).lib"
-TCL_LIBRARY	= $(_TCLDIR)\library
-TCLREGLIB	= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclreg13$(SUFX:t=).lib"
-TCLDDELIB	= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcldde14$(SUFX:t=).lib"
-COFFBASE	= "$(_TCLDIR)\win\coffbase.txt"
-TCLTOOLSDIR	= $(_TCLDIR)\tools
-TCL_INCLUDES	= -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win"
-!endif
-
-!endif
-
-#-------------------------------------------------------------------------
-# Locate the Tk headers to build against
-#-------------------------------------------------------------------------
-
-!if "$(PROJECT)" == "tk"
-_TK_H          = ..\generic\tk.h
-_INSTALLDIR    = $(_INSTALLDIR)\..
-!endif
-
-!ifdef PROJECT_REQUIRES_TK
-!if !defined(TKDIR)
-!if exist("$(_INSTALLDIR)\..\include\tk.h")
-TKINSTALL      = 1
-_TKDIR         = $(_INSTALLDIR)\..
-_TK_H          = $(_TKDIR)\include\tk.h
-TKDIR          = $(_TKDIR)
-!elseif exist("$(_TCLDIR)\include\tk.h")
-TKINSTALL      = 1
-_TKDIR         = $(_TCLDIR)
-_TK_H          = $(_TKDIR)\include\tk.h
-TKDIR          = $(_TKDIR)
-!endif
-!else
-_TKDIR = $(TKDIR:/=\)
-!if exist("$(_TKDIR)\include\tk.h")
-TKINSTALL      = 1
-_TK_H          = $(_TKDIR)\include\tk.h
-!elseif exist("$(_TKDIR)\generic\tk.h")
-TKINSTALL      = 0
-_TK_H          = $(_TKDIR)\generic\tk.h
-!else
-MSG =^
-Failed to find tk.h. The TKDIR macro does not appear correct.
-!error $(MSG)
-!endif
-!endif
-!endif
-
-#-------------------------------------------------------------------------
-# Extract Tk version numbers
-#-------------------------------------------------------------------------
-
-!if defined(PROJECT_REQUIRES_TK) || "$(PROJECT)" == "tk"
-
-!if [echo TK_MAJOR_VERSION = \>> versions.vc] \
-   && [nmakehlp -V $(_TK_H) TK_MAJOR_VERSION >> versions.vc]
-!endif
-!if [echo TK_MINOR_VERSION = \>> versions.vc] \
-   && [nmakehlp -V $(_TK_H) TK_MINOR_VERSION >> versions.vc]
-!endif
-!if [echo TK_PATCH_LEVEL = \>> versions.vc] \
-   && [nmakehlp -V $(_TK_H) TK_PATCH_LEVEL >> versions.vc]
-!endif
-
-!include versions.vc
-
-TK_DOTVERSION	= $(TK_MAJOR_VERSION).$(TK_MINOR_VERSION)
-TK_VERSION	= $(TK_MAJOR_VERSION)$(TK_MINOR_VERSION)
-
-!if "$(PROJECT)" != "tk"
-!if $(TKINSTALL)
-WISH		= "$(_TKDIR)\bin\wish$(TK_VERSION)$(SUFX).exe"
-TKSTUBLIB	= "$(_TKDIR)\lib\tkstub$(TK_VERSION).lib"
-TKIMPLIB	= "$(_TKDIR)\lib\tk$(TK_VERSION)$(SUFX).lib"
-TK_INCLUDES     = -I"$(_TKDIR)\include"
-!else
-WISH		= "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)$(SUFX).exe"
-TKSTUBLIB	= "$(_TKDIR)\win\$(BUILDDIRTOP)\tkstub$(TCL_VERSION).lib"
-TKIMPLIB	= "$(_TKDIR)\win\$(BUILDDIRTOP)\tk$(TCL_VERSION)$(SUFX).lib"
-TK_INCLUDES     = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib"
-!endif
-!endif
-
-!endif
-
-#----------------------------------------------------------
-# Display stats being used.
-#----------------------------------------------------------
-
-!message *** Intermediate directory will be '$(TMP_DIR)'
-!message *** Output directory will be '$(OUT_DIR)'
-!message *** Suffix for binaries will be '$(SUFX)'
-!message *** Optional defines are '$(OPTDEFINES)'
-!message *** Compiler version $(VCVER). Target machine is $(MACHINE)
-!message *** Host architecture is $(NATIVE_ARCH)
-!message *** Compiler options '$(COMPILERFLAGS) $(OPTIMIZATIONS) $(DEBUGFLAGS) $(WARNINGS)'
-!message *** Link options '$(LINKERFLAGS)'
-
-!endif
-