[External] Remove external from RT-Thread

1 files changed, 0 insertions, 972 deletions

diff --git a/components/external/SQLite-3.8.1/test/backup.test b/components/external/SQLite-3.8.1/test/backup.test
deleted file mode 100644
index 444619c68c..0000000000
--- a/components/external/SQLite-3.8.1/test/backup.test
+++ /dev/null
@@ -1,972 +0,0 @@
-# 2009 January 30
-#
-# The author disclaims copyright to this source code.  In place of
-# a legal notice, here is a blessing:
-#
-#    May you do good and not evil.
-#    May you find forgiveness for yourself and forgive others.
-#    May you share freely, never taking more than you give.
-#
-#***********************************************************************
-# This file implements regression tests for SQLite library.  The
-# focus of this file is testing the sqlite3_backup_XXX API.
-#
-# $Id: backup.test,v 1.11 2009/06/05 17:09:12 drh Exp $
-
-set testdir [file dirname $argv0]
-source $testdir/tester.tcl
-
-do_not_use_codec
-
-#---------------------------------------------------------------------
-# Test organization:
-#
-# backup-1.*: Warm-body tests.
-#
-# backup-2.*: Test backup under various conditions. To and from in-memory
-#             databases. To and from empty/populated databases. etc.
-#
-# backup-3.*: Verify that the locking-page (pending byte page) is handled.
-#
-# backup-4.*: Test various error conditions.
-#
-# backup-5.*: Test the source database being modified during a backup.
-#
-# backup-6.*: Test the backup_remaining() and backup_pagecount() APIs.
-#
-# backup-7.*: Test SQLITE_BUSY and SQLITE_LOCKED errors.
-#
-# backup-8.*: Test multiple simultaneous backup operations.
-#
-# backup-9.*: Test that passing a negative argument to backup_step() is
-#             interpreted as "copy the whole file".
-# 
-# backup-10.*: Test writing the source database mid backup.
-#
-
-proc data_checksum {db file} { $db one "SELECT md5sum(a, b) FROM ${file}.t1" }
-proc test_contents {name db1 file1 db2 file2} {
-  $db2 eval {select * from sqlite_master}
-  $db1 eval {select * from sqlite_master}
-  set checksum [data_checksum $db2 $file2]
-  uplevel [list do_test $name [list data_checksum $db1 $file1] $checksum]
-}
-
-do_test backup-1.1 {
-  execsql {
-    BEGIN;
-    CREATE TABLE t1(a, b);
-    CREATE INDEX i1 ON t1(a, b);
-    INSERT INTO t1 VALUES(1, randstr(1000,1000));
-    INSERT INTO t1 VALUES(2, randstr(1000,1000));
-    INSERT INTO t1 VALUES(3, randstr(1000,1000));
-    INSERT INTO t1 VALUES(4, randstr(1000,1000));
-    INSERT INTO t1 VALUES(5, randstr(1000,1000));
-    COMMIT;
-  }
-} {}
-
-# Sanity check to verify that the [test_contents] proc works.
-#
-test_contents backup-1.2 db main db main
-
-# Check that it is possible to create and finish backup operations.
-#
-do_test backup-1.3.1 {
-  delete_file test2.db
-  sqlite3 db2 test2.db
-  sqlite3_backup B db2 main db main
-} {B}
-do_test backup-1.3.2 {
-  B finish
-} {SQLITE_OK}
-do_test backup-1.3.3 {
-  info commands B
-} {}
-
-# Simplest backup operation. Backup test.db to test2.db. test2.db is 
-# initially empty. test.db uses the default page size.
-# 
-do_test backup-1.4.1 {
-  sqlite3_backup B db2 main db main
-} {B}
-do_test backup-1.4.2 {
-  B step 200
-} {SQLITE_DONE}
-do_test backup-1.4.3 {
-  B finish
-} {SQLITE_OK}
-do_test backup-1.4.4 {
-  info commands B
-} {}
-test_contents backup-1.4.5 db2 main db main
-db close
-db2 close
-#
-# End of backup-1.* tests.
-#---------------------------------------------------------------------
-
-
-#---------------------------------------------------------------------
-# The following tests, backup-2.*, are based on the following procedure:
-#
-#   1) Populate the source database.
-#   2) Populate the destination database.
-#   3) Run the backup to completion. (backup-2.*.1)
-#   4) Integrity check the destination db. (backup-2.*.2)
-#   5) Check that the contents of the destination db is the same as that
-#      of the source db. (backup-2.*.3)
-# 
-# The test is run with all possible combinations of the following
-# input parameters, except that if the destination is an in-memory
-# database, the only page size tested is 1024 bytes (the same as the
-# source page-size).
-#
-#   * Source database is an in-memory database, OR
-#   * Source database is a file-backed database.
-#
-#   * Target database is an in-memory database, OR
-#   * Target database is a file-backed database.
-#
-#   * Destination database is a main file, OR
-#   * Destination database is an attached file, OR
-#   * Destination database is a temp database.
-#
-#   * Target database is empty (zero bytes), OR
-#   * Target database is larger than the source, OR
-#   * Target database is smaller than the source.
-#
-#   * Target database page-size is the same as the source, OR
-#   * Target database page-size is larger than the source, OR
-#   * Target database page-size is smaller than the source.
-#
-#   * Each call to step copies a single page, OR
-#   * A single call to step copies the entire source database.
-#
-set iTest 1
-foreach zSrcFile {test.db :memory:} {
-foreach zDestFile {test2.db :memory:} {
-foreach zOpenScript [list {
-  sqlite3 db $zSrcFile
-  sqlite3 db2 $zSrcFile
-  db2 eval "ATTACH '$zDestFile' AS bak"
-  set db_dest db2
-  set file_dest bak
-} {
-  sqlite3 db $zSrcFile
-  sqlite3 db2 $zDestFile
-  set db_dest db2
-  set file_dest main
-} {
-  sqlite3 db $zSrcFile
-  sqlite3 db2 $zDestFile
-  set db_dest db2
-  set file_dest temp
-}] {
-foreach rows_dest {0 3 10} {
-foreach pgsz_dest {512 1024 2048} {
-foreach nPagePerStep {1 200} {
-
-  # Open the databases.
-  catch { delete_file test.db }
-  catch { delete_file test2.db }
-  eval $zOpenScript
-
-  # Set to true if copying to an in-memory destination. Copying to an 
-  # in-memory destination is only possible if the initial destination
-  # page size is the same as the source page size (in this case 1024 bytes).
-  #
-  set isMemDest [expr {
-    $zDestFile eq ":memory:" || $file_dest eq "temp" && $TEMP_STORE>=2
-  }]
-
-  if { $isMemDest==0 || $pgsz_dest == 1024 } {
-    if 0 {
-      puts -nonewline "Test $iTest: src=$zSrcFile dest=$zDestFile"
-      puts -nonewline " (as $db_dest.$file_dest)"
-      puts -nonewline " rows_dest=$rows_dest pgsz_dest=$pgsz_dest"
-      puts ""
-    }
-
-    # Set up the content of the source database.
-    execsql {
-      PRAGMA page_size = 1024;
-      BEGIN;
-      CREATE TABLE t1(a, b);
-      CREATE INDEX i1 ON t1(a, b);
-      INSERT INTO t1 VALUES(1, randstr(1000,1000));
-      INSERT INTO t1 VALUES(2, randstr(1000,1000));
-      INSERT INTO t1 VALUES(3, randstr(1000,1000));
-      INSERT INTO t1 VALUES(4, randstr(1000,1000));
-      INSERT INTO t1 VALUES(5, randstr(1000,1000));
-      COMMIT;
-    }
-    
-    
-
-    # Set up the content of the target database.
-    execsql "PRAGMA ${file_dest}.page_size = ${pgsz_dest}" $db_dest
-    if {$rows_dest != 0} {
-      execsql "
-        BEGIN; 
-        CREATE TABLE ${file_dest}.t1(a, b);
-        CREATE INDEX ${file_dest}.i1 ON t1(a, b);
-      " $db_dest
-      for {set ii 0} {$ii < $rows_dest} {incr ii} {
-        execsql "
-          INSERT INTO ${file_dest}.t1 VALUES(1, randstr(1000,1000))
-        " $db_dest
-      }
-    }
-  
-    # Backup the source database.
-    do_test backup-2.$iTest.1 {
-      sqlite3_backup B $db_dest $file_dest db main
-      while {[B step $nPagePerStep]=="SQLITE_OK"} {}
-      B finish
-    } {SQLITE_OK}
-    
-    # Run integrity check on the backup.
-    do_test backup-2.$iTest.2 {
-      execsql "PRAGMA ${file_dest}.integrity_check" $db_dest
-    } {ok}
-  
-    test_contents backup-2.$iTest.3 db main $db_dest $file_dest
-  
-  }
-
-  db close
-  catch {db2 close}
-  incr iTest
-
-} } } } } }
-#
-# End of backup-2.* tests.
-#---------------------------------------------------------------------
-
-#---------------------------------------------------------------------
-# These tests, backup-3.*, ensure that nothing goes wrong if either 
-# the source or destination database are large enough to include the
-# the locking-page (the page that contains the range of bytes that
-# the locks are applied to). These tests assume that the pending
-# byte is at offset 0x00010000 (64KB offset), as set by tester.tcl, 
-# not at the 1GB offset as it usually is.
-#
-# The test procedure is as follows (same procedure as used for 
-# the backup-2.* tests):
-#
-#   1) Populate the source database.
-#   2) Populate the destination database.
-#   3) Run the backup to completion. (backup-3.*.1)
-#   4) Integrity check the destination db. (backup-3.*.2)
-#   5) Check that the contents of the destination db is the same as that
-#      of the source db. (backup-3.*.3)
-#
-# The test procedure is run with the following parameters varied: 
-#
-#   * Source database includes pending-byte page.
-#   * Source database does not include pending-byte page.
-#
-#   * Target database includes pending-byte page.
-#   * Target database does not include pending-byte page.
-#
-#   * Target database page-size is the same as the source, OR
-#   * Target database page-size is larger than the source, OR
-#   * Target database page-size is smaller than the source.
-#
-set iTest 1
-foreach nSrcPg {10 64 65 66 100} {
-foreach nDestRow {10 100} {
-foreach nDestPgsz {512 1024 2048 4096} {
-
-  catch { delete_file test.db }
-  catch { delete_file test2.db }
-  sqlite3 db test.db
-  sqlite3 db2 test2.db
-
-  # Set up the content of the two databases.
-  #
-  execsql { PRAGMA page_size = 1024 }
-  execsql "PRAGMA page_size = $nDestPgsz" db2
-  foreach db {db db2} {
-    execsql {
-      BEGIN; 
-      CREATE TABLE t1(a, b);
-      CREATE INDEX i1 ON t1(a, b);
-      COMMIT;
-    } $db
-  }
-  while {[file size test.db]/1024 < $nSrcPg} {
-    execsql { INSERT INTO t1 VALUES($ii, randstr(200,200)) }
-  }
-
-  for {set ii 0} {$ii < $nDestRow} {incr ii} {
-    execsql { INSERT INTO t1 VALUES($ii, randstr(1000,1000)) } db2
-  }
-
-  # Backup the source database.
-  do_test backup-3.$iTest.1 {
-    sqlite3_backup B db main db2 main
-    while {[B step 10]=="SQLITE_OK"} {}
-    B finish
-  } {SQLITE_OK}
-    
-  # Run integrity check on the backup.
-  do_test backup-3.$iTest.2 {
-    execsql "PRAGMA integrity_check" db2
-  } {ok}
-  
-  test_contents backup-3.$iTest.3 db main db2 main
-
-  db close
-  db2 close
-  incr iTest
-}
-}
-}
-
-#--------------------------------------------------------------------
-do_test backup-3.$iTest.1 {
-  catch { forcedelete test.db }
-  catch { forcedelete test2.db }
-  sqlite3 db test.db
-  set iTab 1
-
-  db eval { PRAGMA page_size = 512 }
-  while {[file size test.db] <= $::sqlite_pending_byte} {
-    db eval "CREATE TABLE t${iTab}(a, b, c)"
-    incr iTab
-  }
-
-  sqlite3 db2 test2.db
-  db2 eval { PRAGMA page_size = 4096 }
-  while {[file size test2.db] < $::sqlite_pending_byte} {
-    db2 eval "CREATE TABLE t${iTab}(a, b, c)"
-    incr iTab
-  }
-
-  sqlite3_backup B db2 main db main
-  B step -1
-} {SQLITE_DONE}
-
-do_test backup-3.$iTest.2 {
-  B finish
-} {SQLITE_OK}
-
-#
-# End of backup-3.* tests.
-#---------------------------------------------------------------------
-
-
-#---------------------------------------------------------------------
-# The following tests, backup-4.*, test various error conditions:
-# 
-# backup-4.1.*: Test invalid database names.
-#
-# backup-4.2.*: Test that the source database cannot be detached while 
-#               a backup is in progress.
-#
-# backup-4.3.*: Test that the source database handle cannot be closed
-#               while a backup is in progress.
-#
-# backup-4.4.*: Test an attempt to specify the same handle for the
-#               source and destination databases.
-#
-# backup-4.5.*: Test that an in-memory destination with a different
-#               page-size to the source database is an error.
-#
-sqlite3 db test.db
-sqlite3 db2 test2.db
-
-do_test backup-4.1.1 {
-  catch { sqlite3_backup B db aux db2 main }
-} {1}
-do_test backup-4.1.2 {
-  sqlite3_errmsg db
-} {unknown database aux}
-do_test backup-4.1.3 {
-  catch { sqlite3_backup B db main db2 aux }
-} {1}
-do_test backup-4.1.4 {
-  sqlite3_errmsg db
-} {unknown database aux}
-
-do_test backup-4.2.1 {
-  catch { forcedelete test3.db }
-  catch { forcedelete test4.db }
-  execsql { 
-    ATTACH 'test3.db' AS aux1;
-    CREATE TABLE aux1.t1(a, b);
-  }
-  execsql { 
-    ATTACH 'test4.db' AS aux2;
-    CREATE TABLE aux2.t2(a, b);
-  } db2
-  sqlite3_backup B db aux1 db2 aux2
-} {B}
-do_test backup-4.2.2 {
-  catchsql { DETACH aux2 } db2
-} {1 {database aux2 is locked}}
-do_test backup-4.2.3 {
-  B step 50
-} {SQLITE_DONE}
-do_test backup-4.2.4 {
-  B finish
-} {SQLITE_OK}
-
-do_test backup-4.3.1 {
-  sqlite3_backup B db aux1 db2 aux2
-} {B}
-do_test backup-4.3.2 {
-  db2 cache flush
-  sqlite3_close db2
-} {SQLITE_BUSY}
-do_test backup-4.3.3 {
-  sqlite3_errmsg db2
-} {unable to close due to unfinalized statements or unfinished backups}
-do_test backup-4.3.4 {
-  B step 50
-} {SQLITE_DONE}
-do_test backup-4.3.5 {
-  B finish
-} {SQLITE_OK}
-
-do_test backup-4.4.1 {
-  set rc [catch {sqlite3_backup B db main db aux1}]
-  list $rc [sqlite3_errcode db] [sqlite3_errmsg db]
-} {1 SQLITE_ERROR {source and destination must be distinct}}
-db close
-db2 close
-
-do_test backup-4.5.1 {
-  catch { forcedelete test.db }
-  sqlite3 db test.db
-  sqlite3 db2 :memory:
-  execsql {
-    CREATE TABLE t1(a, b);
-    INSERT INTO t1 VALUES(1, 2);
-  }
-  execsql {
-    PRAGMA page_size = 4096;
-    CREATE TABLE t2(a, b);
-    INSERT INTO t2 VALUES(3, 4);
-  } db2
-  sqlite3_backup B db2 main db main
-} {B}
-do_test backup-4.5.2 {
-  B step 5000
-} {SQLITE_READONLY}
-do_test backup-4.5.3 {
-  B finish
-} {SQLITE_READONLY}
-
-db close
-db2 close
-#
-# End of backup-4.* tests.
-#---------------------------------------------------------------------
-
-#---------------------------------------------------------------------
-# The following tests, backup-5.*, test that the backup works properly
-# when the source database is modified during the backup. Test cases
-# are organized as follows:
-#
-# backup-5.x.1.*: Nothing special. Modify the database mid-backup.
-#
-# backup-5.x.2.*: Modify the database mid-backup so that one or more
-#                 pages are written out due to cache stress. Then 
-#                 rollback the transaction.
-#
-# backup-5.x.3.*: Database is vacuumed.
-#
-# backup-5.x.4.*: Database is vacuumed and the page-size modified.
-#
-# backup-5.x.5.*: Database is shrunk via incr-vacuum.
-#
-# Each test is run three times, in the following configurations:
-#
-#   1) Backing up file-to-file. The writer writes via an external pager.
-#   2) Backing up file-to-file. The writer writes via the same pager as
-#      is used by the backup operation.
-#   3) Backing up memory-to-file. 
-#
-set iTest 0
-forcedelete bak.db-wal
-foreach {writer file} {db test.db db3 test.db db :memory:} {
-  incr iTest
-  catch { delete_file bak.db }
-  sqlite3 db2 bak.db
-  catch { delete_file $file }
-  sqlite3 db $file
-  sqlite3 db3 $file
-
-  do_test backup-5.$iTest.1.1 {
-    execsql {
-      BEGIN;
-      CREATE TABLE t1(a, b);
-      CREATE INDEX i1 ON t1(a, b);
-      INSERT INTO t1 VALUES(1, randstr(1000,1000));
-      INSERT INTO t1 VALUES(2, randstr(1000,1000));
-      INSERT INTO t1 VALUES(3, randstr(1000,1000));
-      INSERT INTO t1 VALUES(4, randstr(1000,1000));
-      INSERT INTO t1 VALUES(5, randstr(1000,1000));
-      COMMIT;
-    }
-    expr {[execsql {PRAGMA page_count}] > 10}
-  } {1}
-  do_test backup-5.$iTest.1.2 {
-    sqlite3_backup B db2 main db main
-    B step 5
-  } {SQLITE_OK}
-  do_test backup-5.$iTest.1.3 {
-    execsql { UPDATE t1 SET a = a + 1 } $writer
-    B step 50
-  } {SQLITE_DONE}
-  do_test backup-5.$iTest.1.4 {
-    B finish
-  } {SQLITE_OK} 
-  integrity_check backup-5.$iTest.1.5 db2
-  test_contents backup-5.$iTest.1.6 db main db2 main
-
-  do_test backup-5.$iTest.2.1 {
-    execsql {
-      PRAGMA cache_size = 10;
-      BEGIN;
-      INSERT INTO t1 SELECT '', randstr(1000,1000) FROM t1;
-      INSERT INTO t1 SELECT '', randstr(1000,1000) FROM t1;
-      INSERT INTO t1 SELECT '', randstr(1000,1000) FROM t1;
-      INSERT INTO t1 SELECT '', randstr(1000,1000) FROM t1;
-      COMMIT;
-    }
-  } {}
-  do_test backup-5.$iTest.2.2 {
-    sqlite3_backup B db2 main db main
-    B step 50
-  } {SQLITE_OK}
-  do_test backup-5.$iTest.2.3 {
-    execsql { 
-      BEGIN;
-      UPDATE t1 SET a = a + 1;
-      ROLLBACK;
-    } $writer
-    B step 5000
-  } {SQLITE_DONE}
-  do_test backup-5.$iTest.2.4 {
-    B finish
-  } {SQLITE_OK} 
-  integrity_check backup-5.$iTest.2.5 db2
-  test_contents backup-5.$iTest.2.6 db main db2 main
-
-  do_test backup-5.$iTest.3.1 {
-    execsql { UPDATE t1 SET b = randstr(1000,1000) }
-  } {}
-  do_test backup-5.$iTest.3.2 {
-    sqlite3_backup B db2 main db main
-    B step 50
-  } {SQLITE_OK}
-  do_test backup-5.$iTest.3.3 {
-    execsql { VACUUM } $writer
-    B step 5000
-  } {SQLITE_DONE}
-  do_test backup-5.$iTest.3.4 {
-    B finish
-  } {SQLITE_OK} 
-  integrity_check backup-5.$iTest.3.5 db2
-  test_contents backup-5.$iTest.3.6 db main db2 main
-
-  do_test backup-5.$iTest.4.1 {
-    execsql { UPDATE t1 SET b = randstr(1000,1000) }
-  } {}
-  do_test backup-5.$iTest.4.2 {
-    sqlite3_backup B db2 main db main
-    B step 50
-  } {SQLITE_OK}
-  do_test backup-5.$iTest.4.3 {
-    execsql { 
-      PRAGMA page_size = 2048;
-      VACUUM;
-    } $writer
-    B step 5000
-  } {SQLITE_DONE}
-  do_test backup-5.$iTest.4.4 {
-    B finish
-  } {SQLITE_OK} 
-  integrity_check backup-5.$iTest.4.5 db2
-  test_contents backup-5.$iTest.4.6 db main db2 main
-
-  catch {db close}
-  catch {db2 close}
-  catch {db3 close}
-  catch { delete_file bak.db }
-  sqlite3 db2 bak.db
-  catch { delete_file $file }
-  sqlite3 db $file
-  sqlite3 db3 $file
-  do_test backup-5.$iTest.5.1 {
-    execsql {
-      PRAGMA auto_vacuum = incremental;
-      BEGIN;
-      CREATE TABLE t1(a, b);
-      CREATE INDEX i1 ON t1(a, b);
-      INSERT INTO t1 VALUES(1, randstr(1000,1000));
-      INSERT INTO t1 VALUES(2, randstr(1000,1000));
-      INSERT INTO t1 VALUES(3, randstr(1000,1000));
-      INSERT INTO t1 VALUES(4, randstr(1000,1000));
-      INSERT INTO t1 VALUES(5, randstr(1000,1000));
-      COMMIT;
-    }
-  } {}
-  do_test backup-5.$iTest.5.2 {
-    sqlite3_backup B db2 main db main
-    B step 8
-  } {SQLITE_OK}
-  do_test backup-5.$iTest.5.3 {
-    execsql { 
-      DELETE FROM t1;
-      PRAGMA incremental_vacuum;
-    } $writer
-    B step 50
-  } {SQLITE_DONE}
-  do_test backup-5.$iTest.5.4 {
-    B finish
-  } {SQLITE_OK} 
-  integrity_check backup-5.$iTest.5.5 db2
-  test_contents backup-5.$iTest.5.6 db main db2 main
-  catch {db close}
-  catch {db2 close}
-  catch {db3 close}
-}
-#
-# End of backup-5.* tests.
-#---------------------------------------------------------------------
-
-#---------------------------------------------------------------------
-# Test the sqlite3_backup_remaining() and backup_pagecount() APIs.
-#
-do_test backup-6.1 {
-  catch { forcedelete test.db }
-  catch { forcedelete test2.db }
-  sqlite3 db test.db
-  sqlite3 db2 test2.db
-  execsql {
-    BEGIN;
-    CREATE TABLE t1(a, b);
-    CREATE INDEX i1 ON t1(a, b);
-    INSERT INTO t1 VALUES(1, randstr(1000,1000));
-    INSERT INTO t1 VALUES(2, randstr(1000,1000));
-    INSERT INTO t1 VALUES(3, randstr(1000,1000));
-    INSERT INTO t1 VALUES(4, randstr(1000,1000));
-    INSERT INTO t1 VALUES(5, randstr(1000,1000));
-    COMMIT;
-  }
-} {}
-do_test backup-6.2 {
-  set nTotal [expr {[file size test.db]/1024}]
-  sqlite3_backup B db2 main db main
-  B step 1
-} {SQLITE_OK}
-do_test backup-6.3 {
-  B pagecount
-} $nTotal
-do_test backup-6.4 {
-  B remaining
-} [expr $nTotal-1]
-do_test backup-6.5 {
-  B step 5
-  list [B remaining] [B pagecount]
-} [list [expr $nTotal-6] $nTotal]
-do_test backup-6.6 {
-  execsql { CREATE TABLE t2(a PRIMARY KEY, b) }
-  B step 1
-  list [B remaining] [B pagecount]
-} [list [expr $nTotal-5] [expr $nTotal+2]]
-
-do_test backup-6.X {
-  B finish
-} {SQLITE_OK}
-
-catch {db close}
-catch {db2 close}
-
-#---------------------------------------------------------------------
-# Test cases backup-7.* test that SQLITE_BUSY and SQLITE_LOCKED errors
-# are returned correctly:
-#
-# backup-7.1.*: Source database is externally locked (return SQLITE_BUSY).
-#
-# backup-7.2.*: Attempt to step the backup process while a 
-#               write-transaction is underway on the source pager (return
-#               SQLITE_LOCKED).
-#
-# backup-7.3.*: Destination database is externally locked (return SQLITE_BUSY).
-#
-do_test backup-7.0 {
-  catch { forcedelete test.db }
-  catch { forcedelete test2.db }
-  sqlite3 db2 test2.db
-  sqlite3 db test.db
-  execsql {
-    CREATE TABLE t1(a, b);
-    CREATE INDEX i1 ON t1(a, b);
-    INSERT INTO t1 VALUES(1, randstr(1000,1000));
-    INSERT INTO t1 SELECT a+ 1, randstr(1000,1000) FROM t1;
-    INSERT INTO t1 SELECT a+ 2, randstr(1000,1000) FROM t1;
-    INSERT INTO t1 SELECT a+ 4, randstr(1000,1000) FROM t1;
-    INSERT INTO t1 SELECT a+ 8, randstr(1000,1000) FROM t1;
-    INSERT INTO t1 SELECT a+16, randstr(1000,1000) FROM t1;
-    INSERT INTO t1 SELECT a+32, randstr(1000,1000) FROM t1;
-    INSERT INTO t1 SELECT a+64, randstr(1000,1000) FROM t1;
-  }
-} {}
-
-do_test backup-7.1.1 {
-  sqlite3_backup B db2 main db main
-  B step 5
-} {SQLITE_OK}
-do_test backup-7.1.2 {
-  sqlite3 db3 test.db
-  execsql { BEGIN EXCLUSIVE } db3
-  B step 5
-} {SQLITE_BUSY}
-do_test backup-7.1.3 {
-  execsql { ROLLBACK } db3
-  B step 5
-} {SQLITE_OK}
-do_test backup-7.2.1 {
-  execsql { 
-    BEGIN;
-    INSERT INTO t1 VALUES(1, 4);
-  }
-} {}
-do_test backup-7.2.2 {
-  B step 5000
-} {SQLITE_BUSY}
-do_test backup-7.2.3 {
-  execsql { ROLLBACK }
-  B step 5000
-} {SQLITE_DONE}
-do_test backup-7.2.4 {
-  B finish
-} {SQLITE_OK}
-test_contents backup-7.2.5 db main db2 main
-integrity_check backup-7.3.6 db2
-
-do_test backup-7.3.1 {
-  db2 close
-  db3 close
-  forcedelete test2.db
-  sqlite3 db2 test2.db
-  sqlite3 db3 test2.db
-
-  sqlite3_backup B db2 main db main
-  execsql { BEGIN ; CREATE TABLE t2(a, b); } db3
-
-  B step 5
-} {SQLITE_BUSY}
-do_test backup-7.3.2 {
-  execsql { COMMIT } db3
-  B step 5000
-} {SQLITE_DONE}
-do_test backup-7.3.3 {
-  B finish
-} {SQLITE_OK}
-test_contents backup-7.3.4 db main db2 main
-integrity_check backup-7.3.5 db2
-catch { db2 close }
-catch { db3 close }
-
-#-----------------------------------------------------------------------
-# The following tests, backup-8.*, test attaching multiple backup
-# processes to the same source database. Also, reading from the source
-# database while a read transaction is active.
-#
-# These tests reuse the database "test.db" left over from backup-7.*.
-#
-do_test backup-8.1 {
-  catch { forcedelete test2.db }
-  catch { forcedelete test3.db }
-  sqlite3 db2 test2.db
-  sqlite3 db3 test3.db
-
-  sqlite3_backup B2 db2 main db main
-  sqlite3_backup B3 db3 main db main
-  list [B2 finish] [B3 finish]
-} {SQLITE_OK SQLITE_OK}
-do_test backup-8.2 {
-  sqlite3_backup B3 db3 main db main
-  sqlite3_backup B2 db2 main db main
-  list [B2 finish] [B3 finish]
-} {SQLITE_OK SQLITE_OK}
-do_test backup-8.3 {
-  sqlite3_backup B2 db2 main db main
-  sqlite3_backup B3 db3 main db main
-  B2 step 5
-} {SQLITE_OK}
-do_test backup-8.4 {
-  execsql {
-    BEGIN;
-    SELECT * FROM sqlite_master;
-  }
-  B3 step 5
-} {SQLITE_OK}
-do_test backup-8.5 {
-  list [B3 step 5000] [B3 finish]
-} {SQLITE_DONE SQLITE_OK}
-do_test backup-8.6 {
-  list [B2 step 5000] [B2 finish]
-} {SQLITE_DONE SQLITE_OK}
-test_contents backup-8.7 db main db2 main
-test_contents backup-8.8 db main db3 main
-do_test backup-8.9 {
-  execsql { PRAGMA lock_status }
-} {main shared temp closed}
-do_test backup-8.10 {
-  execsql COMMIT
-} {}
-catch { db2 close }
-catch { db3 close }
-
-#-----------------------------------------------------------------------
-# The following tests, backup-9.*, test that:
-# 
-#   * Passing 0 as an argument to sqlite3_backup_step() means no pages
-#     are backed up (backup-9.1.*), and 
-#   * Passing a negative value as an argument to sqlite3_backup_step() means 
-#     all pages are backed up (backup-9.2.*).
-#
-# These tests reuse the database "test.db" left over from backup-7.*.
-# 
-do_test backup-9.1.1 {
-  sqlite3 db2 test2.db
-  sqlite3_backup B db2 main db main
-  B step 1
-} {SQLITE_OK}
-do_test backup-9.1.2 {
-  set nRemaining [B remaining]
-  expr {$nRemaining>100}
-} {1}
-do_test backup-9.1.3 {
-  B step 0
-} {SQLITE_OK}
-do_test backup-9.1.4 {
-  B remaining
-} $nRemaining
-
-do_test backup-9.2.1 {
-  B step -1
-} {SQLITE_DONE}
-do_test backup-9.2.2 {
-  B remaining
-} {0}
-do_test backup-9.2.3 {
-  B finish
-} {SQLITE_OK}
-catch {db2 close}
-
-ifcapable memorymanage {
-  db close
-  forcedelete test.db
-  forcedelete bak.db
-
-  sqlite3 db test.db
-  sqlite3 db2 test.db
-  sqlite3 db3 bak.db
-
-  do_test backup-10.1.1 {
-    execsql {
-      BEGIN;
-      CREATE TABLE t1(a, b);
-      INSERT INTO t1 VALUES(1, randstr(1000,1000));
-      INSERT INTO t1 VALUES(2, randstr(1000,1000));
-      INSERT INTO t1 VALUES(3, randstr(1000,1000));
-      INSERT INTO t1 VALUES(4, randstr(1000,1000));
-      INSERT INTO t1 VALUES(5, randstr(1000,1000));
-      CREATE INDEX i1 ON t1(a, b);
-      COMMIT;
-    }
-  } {}
-  do_test backup-10.1.2 {
-    sqlite3_backup B db3 main db2 main
-    B step 5
-  } {SQLITE_OK}
-  do_test backup-10.1.3 {
-    execsql {
-      UPDATE t1 SET b = randstr(500,500);
-    }
-  } {}
-  sqlite3_release_memory [expr 1024*1024]
-  do_test backup-10.1.3 {
-    B step 50
-  } {SQLITE_DONE}
-  do_test backup-10.1.4 {
-    B finish
-  } {SQLITE_OK}
-  do_test backup-10.1.5 {
-    execsql { PRAGMA integrity_check } db3
-  } {ok}
-
-  db2 close
-  db3 close
-}
-
-
-#-----------------------------------------------------------------------
-# Test that if the database is written to via the same database handle being
-# used as the source by a backup operation:
-#
-#   10.1.*: If the db is in-memory, the backup is restarted.
-#   10.2.*: If the db is a file, the backup is not restarted.
-#
-db close
-forcedelete test.db test.db-journal
-foreach {tn file rc} {
-  1 test.db  SQLITE_DONE
-  2 :memory: SQLITE_OK
-} {
-  do_test backup-10.$tn.1 {
-    sqlite3 db $file
-    execsql { 
-      CREATE TABLE t1(a INTEGER PRIMARY KEY, b BLOB);
-      BEGIN;
-        INSERT INTO t1 VALUES(NULL, randomblob(200));
-        INSERT INTO t1 SELECT NULL, randomblob(200) FROM t1;
-        INSERT INTO t1 SELECT NULL, randomblob(200) FROM t1;
-        INSERT INTO t1 SELECT NULL, randomblob(200) FROM t1;
-        INSERT INTO t1 SELECT NULL, randomblob(200) FROM t1;
-        INSERT INTO t1 SELECT NULL, randomblob(200) FROM t1;
-        INSERT INTO t1 SELECT NULL, randomblob(200) FROM t1;
-        INSERT INTO t1 SELECT NULL, randomblob(200) FROM t1;
-        INSERT INTO t1 SELECT NULL, randomblob(200) FROM t1;
-      COMMIT;
-      SELECT count(*) FROM t1;
-    }
-  } {256}
-
-  do_test backup-10.$tn.2 {
-    set pgs [execsql {pragma page_count}]
-    expr {$pgs > 50 && $pgs < 75}
-  } {1}
-
-  do_test backup-10.$tn.3 {
-    forcedelete bak.db bak.db-journal
-    sqlite3 db2 bak.db
-    sqlite3_backup B db2 main db main
-    B step 50
-  } {SQLITE_OK}
-
-  do_test backup-10.$tn.4 {
-    execsql { UPDATE t1 SET b = randomblob(200) WHERE a IN (1, 250) }
-  } {}
-
-  do_test backup-10.$tn.5 {
-    B step 50
-  } $rc
-
-  do_test backup-10.$tn.6 {
-    B finish
-  } {SQLITE_OK}
-
-  db2 close
-}
-
-finish_test