[External] Remove external from RT-Thread

1 files changed, 0 insertions, 890 deletions

diff --git a/components/external/SQLite-3.8.1/test/malloc.test b/components/external/SQLite-3.8.1/test/malloc.test
deleted file mode 100644
index 5d03aa8fe8..0000000000
--- a/components/external/SQLite-3.8.1/test/malloc.test
+++ /dev/null
@@ -1,890 +0,0 @@
-# 2001 September 15
-#
-# The author disclaims copyright to this source code.  In place of
-# a legal notice, here is a blessing:
-#
-#    May you do good and not evil.
-#    May you find forgiveness for yourself and forgive others.
-#    May you share freely, never taking more than you give.
-#
-#***********************************************************************
-#
-# This file attempts to check the behavior of the SQLite library in 
-# an out-of-memory situation. When compiled with -DSQLITE_DEBUG=1, 
-# the SQLite library accepts a special command (sqlite3_memdebug_fail N C)
-# which causes the N-th malloc to fail.  This special feature is used
-# to see what happens in the library if a malloc were to really fail
-# due to an out-of-memory situation.
-#
-# $Id: malloc.test,v 1.81 2009/06/24 13:13:45 drh Exp $
-
-set testdir [file dirname $argv0]
-source $testdir/tester.tcl
-
-
-# Only run these tests if memory debugging is turned on.
-#
-source $testdir/malloc_common.tcl
-if {!$MEMDEBUG} {
-   puts "Skipping malloc tests: not compiled with -DSQLITE_MEMDEBUG..."
-   finish_test
-   return
-}
-
-# Do a couple of memory dumps just to exercise the memory dump logic
-# that that we can say that we have.
-#
-puts stderr "This is a test.  Ignore the error that follows:"
-sqlite3_memdebug_dump $testdir
-puts "Memory dump to file memdump.txt..."
-sqlite3_memdebug_dump memdump.txt
-
-ifcapable bloblit&&subquery {
-  do_malloc_test 1 -tclprep {
-    db close
-  } -tclbody {
-    if {[catch {sqlite3 db test.db}]} {
-      error "out of memory"
-    }
-    sqlite3_extended_result_codes db 1
-  } -sqlbody {
-    DROP TABLE IF EXISTS t1;
-    CREATE TABLE t1(
-       a int, b float, c double, d text, e varchar(20),
-       primary key(a,b,c)
-    );
-    CREATE INDEX i1 ON t1(a,b);
-    INSERT INTO t1 VALUES(1,2.3,4.5,'hi',x'746865726500');
-    INSERT INTO t1 VALUES(6,7.0,0.8,'hello','out yonder');
-    SELECT * FROM t1;
-    SELECT avg(b) FROM t1 GROUP BY a HAVING b>20.0;
-    DELETE FROM t1 WHERE a IN (SELECT min(a) FROM t1);
-    SELECT count(*), group_concat(e) FROM t1;
-    SELECT b FROM t1 ORDER BY 1 COLLATE nocase;
-  } 
-}
-
-# Ensure that no file descriptors were leaked.
-do_test malloc-1.X {
-  catch {db close}
-  set sqlite_open_file_count
-} {0}
-
-ifcapable subquery {
-  do_malloc_test 2 -sqlbody {
-    CREATE TABLE t1(a int, b int default 'abc', c int default 1);
-    CREATE INDEX i1 ON t1(a,b);
-    INSERT INTO t1 VALUES(1,1,'99 abcdefghijklmnopqrstuvwxyz');
-    INSERT INTO t1 VALUES(2,4,'98 abcdefghijklmnopqrstuvwxyz');
-    INSERT INTO t1 VALUES(3,9,'97 abcdefghijklmnopqrstuvwxyz');
-    INSERT INTO t1 VALUES(4,16,'96 abcdefghijklmnopqrstuvwxyz');
-    INSERT INTO t1 VALUES(5,25,'95 abcdefghijklmnopqrstuvwxyz');
-    INSERT INTO t1 VALUES(6,36,'94 abcdefghijklmnopqrstuvwxyz');
-    SELECT 'stuff', count(*) as 'other stuff', max(a+10) FROM t1;
-    UPDATE t1 SET b=b||b||b||b;
-    UPDATE t1 SET b=a WHERE a in (10,12,22);
-    INSERT INTO t1(c,b,a) VALUES(20,10,5);
-    INSERT INTO t1 SELECT * FROM t1
-        WHERE a IN (SELECT a FROM t1 WHERE a<10);
-    DELETE FROM t1 WHERE a>=10;
-    DROP INDEX i1;
-    DELETE FROM t1;
-  } 
-}
-
-# Ensure that no file descriptors were leaked.
-do_test malloc-2.X {
-  catch {db close}
-  set sqlite_open_file_count
-} {0}
-
-do_malloc_test 3 -sqlbody {
-  BEGIN TRANSACTION;
-  CREATE TABLE t1(a int, b int, c int);
-  CREATE INDEX i1 ON t1(a,b);
-  INSERT INTO t1 VALUES(1,1,99);
-  INSERT INTO t1 VALUES(2,4,98);
-  INSERT INTO t1 VALUES(3,9,97);
-  INSERT INTO t1 VALUES(4,16,96);
-  INSERT INTO t1 VALUES(5,25,95);
-  INSERT INTO t1 VALUES(6,36,94);
-  INSERT INTO t1(c,b,a) VALUES(20,10,5);
-  DELETE FROM t1 WHERE a>=10;
-  DROP INDEX i1;
-  DELETE FROM t1;
-  ROLLBACK;
-} 
-
-
-# Ensure that no file descriptors were leaked.
-do_test malloc-3.X {
-  catch {db close}
-  set sqlite_open_file_count
-} {0}
-
-ifcapable subquery {
-  do_malloc_test 4 -sqlbody {
-    BEGIN TRANSACTION;
-    CREATE TABLE t1(a int, b int, c int);
-    CREATE INDEX i1 ON t1(a,b);
-    INSERT INTO t1 VALUES(1,1,99);
-    INSERT INTO t1 VALUES(2,4,98);
-    INSERT INTO t1 VALUES(3,9,97);
-    INSERT INTO t1 VALUES(4,16,96);
-    INSERT INTO t1 VALUES(5,25,95);
-    INSERT INTO t1 VALUES(6,36,94);
-    UPDATE t1 SET b=a WHERE a in (10,12,22);
-    INSERT INTO t1 SELECT * FROM t1
-       WHERE a IN (SELECT a FROM t1 WHERE a<10);
-    DROP INDEX i1;
-    DELETE FROM t1;
-    COMMIT;
-  } 
-}
-
-# Ensure that no file descriptors were leaked.
-do_test malloc-4.X {
-  catch {db close}
-  set sqlite_open_file_count
-} {0}
-
-ifcapable trigger {
-  do_malloc_test 5 -sqlbody {
-    BEGIN TRANSACTION;
-    CREATE TABLE t1(a,b);
-    CREATE TABLE t2(x,y);
-    CREATE TRIGGER r1 AFTER INSERT ON t1 WHEN new.a = 2 BEGIN
-      INSERT INTO t2(x,y) VALUES(new.rowid,1);
-      INSERT INTO t2(x,y) SELECT * FROM t2;
-      INSERT INTO t2 SELECT * FROM t2;
-      UPDATE t2 SET y=y+1 WHERE x=new.rowid;
-      SELECT 123;
-      DELETE FROM t2 WHERE x=new.rowid;
-    END;
-    INSERT INTO t1(a,b) VALUES(2,3);
-    COMMIT;
-  } 
-}
-
-# Ensure that no file descriptors were leaked.
-do_test malloc-5.X {
-  catch {db close}
-  set sqlite_open_file_count
-} {0}
-
-ifcapable vacuum {
-  do_malloc_test 6 -sqlprep {
-    BEGIN TRANSACTION;
-    CREATE TABLE t1(a);
-    INSERT INTO t1 VALUES(1);
-    INSERT INTO t1 SELECT a*2 FROM t1;
-    INSERT INTO t1 SELECT a*2 FROM t1;
-    INSERT INTO t1 SELECT a*2 FROM t1;
-    INSERT INTO t1 SELECT a*2 FROM t1;
-    INSERT INTO t1 SELECT a*2 FROM t1;
-    INSERT INTO t1 SELECT a*2 FROM t1;
-    INSERT INTO t1 SELECT a*2 FROM t1;
-    INSERT INTO t1 SELECT a*2 FROM t1;
-    INSERT INTO t1 SELECT a*2 FROM t1;
-    INSERT INTO t1 SELECT a*2 FROM t1;
-    DELETE FROM t1 where rowid%5 = 0;
-    COMMIT;
-  } -sqlbody {
-    VACUUM;
-  } 
-}
-
-autoinstall_test_functions
-do_malloc_test 7 -sqlprep {
-  CREATE TABLE t1(a, b);
-  INSERT INTO t1 VALUES(1, 2);
-  INSERT INTO t1 VALUES(3, 4);
-  INSERT INTO t1 VALUES(5, 6);
-  INSERT INTO t1 VALUES(7, randstr(1200,1200));
-} -sqlbody {
-  SELECT min(a) FROM t1 WHERE a<6 GROUP BY b;
-  SELECT a FROM t1 WHERE a<6 ORDER BY a;
-  SELECT b FROM t1 WHERE a>6;
-}
-
-# This block is designed to test that some malloc failures that may
-# occur in vdbeapi.c. Specifically, if a malloc failure that occurs
-# when converting UTF-16 text to integers and real numbers is handled
-# correctly. 
-#
-# This is done by retrieving a string from the database engine and
-# manipulating it using the sqlite3_column_*** APIs. This doesn't 
-# actually return an error to the user when a malloc() fails.. That 
-# could be viewed as a bug.
-#
-# These tests only run if UTF-16 support is compiled in.
-#
-ifcapable utf16 {
-  set ::STMT {}
-  do_malloc_test 8 -tclprep {
-    set sql "SELECT '[string repeat abc 20]', '[string repeat def 20]', ?"
-    set ::STMT [sqlite3_prepare db $sql -1 X]
-    sqlite3_step $::STMT
-    if { $::tcl_platform(byteOrder)=="littleEndian" } {
-      set ::bomstr "\xFF\xFE"
-    } else {
-      set ::bomstr "\xFE\xFF"
-    }
-    append ::bomstr [encoding convertto unicode "123456789_123456789_123456789"]
-  } -tclbody {
-    sqlite3_column_text16 $::STMT 0
-    sqlite3_column_int $::STMT 0
-    sqlite3_column_text16 $::STMT 1
-    sqlite3_column_double $::STMT 1
-    set rc [sqlite3_reset $::STMT]
-    if {$rc eq "SQLITE_NOMEM"} {error "out of memory"}
-    sqlite3_bind_text16 $::STMT 1 $::bomstr 60
-    #catch {sqlite3_finalize $::STMT}
-    #if {[lindex [sqlite_malloc_stat] 2]<=0} {
-    #  error "out of memory"
-    #}
-  } -cleanup {
-    if {$::STMT!=""} {
-      sqlite3_finalize $::STMT
-      set ::STMT {}
-    }
-  }
-}
-
-# This block tests that malloc() failures that occur whilst commiting
-# a multi-file transaction are handled correctly.
-#
-do_malloc_test 9 -sqlprep {
-  ATTACH 'test2.db' as test2;
-  CREATE TABLE abc1(a, b, c);
-  CREATE TABLE test2.abc2(a, b, c);
-} -sqlbody {
-  BEGIN;
-  INSERT INTO abc1 VALUES(1, 2, 3);
-  INSERT INTO abc2 VALUES(1, 2, 3);
-  COMMIT;
-}
-
-# This block tests malloc() failures that occur while opening a 
-# connection to a database.
-do_malloc_test 10 -tclprep {
-  catch {db2 close}
-  db close
-  forcedelete test.db test.db-journal
-  sqlite3 db test.db
-  sqlite3_extended_result_codes db 1
-  db eval {CREATE TABLE abc(a, b, c)}
-} -tclbody {
-  db close
-  sqlite3 db2 test.db
-  sqlite3_extended_result_codes db2 1
-  db2 eval {SELECT * FROM sqlite_master}
-  db2 close
-}
-
-# This block tests malloc() failures that occur within calls to
-# sqlite3_create_function().
-do_malloc_test 11 -tclbody {
-  set rc [sqlite3_create_function db]
-  if {[string match $rc SQLITE_OK]} {
-    set rc [sqlite3_create_aggregate db]
-  }
-  if {[string match $rc SQLITE_NOMEM]} {
-    error "out of memory"
-  }
-}
-
-do_malloc_test 12 -tclbody {
-  set sql16 [encoding convertto unicode "SELECT * FROM sqlite_master"]
-  append sql16 "\00\00"
-  set ::STMT [sqlite3_prepare16 db $sql16 -1 DUMMY]
-  sqlite3_finalize $::STMT
-}
-
-# Test malloc errors when replaying two hot journals from a 2-file 
-# transaction.
-ifcapable crashtest&&attach {
-  do_malloc_test 13 -tclprep {
-    set rc [crashsql -delay 1 -file test2.db {
-      ATTACH 'test2.db' as aux;
-      PRAGMA cache_size = 10;
-      BEGIN;
-      CREATE TABLE aux.t2(a, b, c);
-      CREATE TABLE t1(a, b, c);
-      COMMIT;
-    }]
-    if {$rc!="1 {child process exited abnormally}"} {
-      error "Wrong error message: $rc"
-    }
-  } -tclbody {
-    db eval {ATTACH 'test2.db' as aux;}
-    set rc [catch {db eval {
-      SELECT * FROM t1; 
-      SELECT * FROM t2;
-    }} err]
-    if {$rc && $err!="no such table: t1"} {
-      error $err
-    }
-  }
-}
-
-if {$tcl_platform(platform)!="windows"} {
-  do_malloc_test 14 -tclprep {
-    catch {db close}
-    sqlite3 db2 test2.db
-    sqlite3_extended_result_codes db2 1
-    db2 eval {
-      PRAGMA journal_mode = DELETE;    /* For inmemory_journal permutation */
-      PRAGMA synchronous = 0;
-      CREATE TABLE t1(a, b);
-      INSERT INTO t1 VALUES(1, 2);
-      BEGIN;
-      INSERT INTO t1 VALUES(3, 4);
-    }
-    forcecopy test2.db test.db
-    forcecopy test2.db-journal test.db-journal
-    db2 close
-  } -tclbody {
-    sqlite3 db test.db
-    sqlite3_extended_result_codes db 1
-
-    # If an out-of-memory occurs within a call to a VFS layer function during
-    # hot-journal rollback, sqlite will report SQLITE_CORRUPT. See commit
-    # [5668] for details.
-    set rc [catch {db eval { SELECT * FROM t1 }} msg]
-    if {$msg eq "database disk image is malformed"} { set msg "out of memory" }
-    if {$rc} { error $msg }
-    set msg
-  }
-}
-
-proc string_compare {a b} {
-  return [string compare $a $b]
-}
-
-# Test for malloc() failures in sqlite3_create_collation() and 
-# sqlite3_create_collation16().
-#
-ifcapable utf16 {
-  do_malloc_test 15 -start 4 -tclbody {
-    db collate string_compare string_compare
-    if {[catch {add_test_collate db 1 1 1} msg]} {
-      if {$msg=="SQLITE_NOMEM"} {set msg "out of memory"}
-      error $msg
-    }
-  
-    db complete {SELECT "hello """||'world"' [microsoft], * FROM anicetable;}
-    db complete {-- Useful comment}
-  
-    execsql {
-      CREATE TABLE t1(a, b COLLATE string_compare);
-      INSERT INTO t1 VALUES(10, 'string');
-      INSERT INTO t1 VALUES(10, 'string2');
-    }
-  }
-}
-
-# Also test sqlite3_complete(). There are (currently) no malloc()
-# calls in this function, but test anyway against future changes.
-#
-do_malloc_test 16 -tclbody {
-  db complete {SELECT "hello """||'world"' [microsoft], * FROM anicetable;}
-  db complete {-- Useful comment}
-  db eval {
-    SELECT * FROM sqlite_master;
-  }
-}
-
-# Test handling of malloc() failures in sqlite3_open16().
-#
-ifcapable utf16 {
-  do_malloc_test 17 -tclbody {
-    set DB2 0
-    set STMT 0
-  
-    # open database using sqlite3_open16()
-    set filename [encoding convertto unicode test.db]
-    append filename "\x00\x00"
-    set DB2 [sqlite3_open16 $filename -unused]
-    if {0==$DB2} {
-      error "out of memory"
-    }
-    sqlite3_extended_result_codes $DB2 1
-  
-    # Prepare statement
-    set rc [catch {sqlite3_prepare $DB2 {SELECT * FROM sqlite_master} -1 X} msg]
-    if {[sqlite3_errcode $DB2] eq "SQLITE_IOERR+12"} {
-      error "out of memory"
-    }
-    if {[regexp ".*automatic extension loading.*" [sqlite3_errmsg $DB2]]} {
-      error "out of memory"
-    }
-    if {$rc} {
-      error [string range $msg 4 end]
-    }
-    set STMT $msg
-  
-    # Finalize statement
-    set rc [sqlite3_finalize $STMT]
-    if {$rc!="SQLITE_OK"} {
-      error [sqlite3_errmsg $DB2]
-    }
-    set STMT 0
-  
-    # Close database
-    set rc [sqlite3_close $DB2]
-    if {$rc!="SQLITE_OK"} {
-      error [sqlite3_errmsg $DB2]
-    }
-    set DB2 0
-  } -cleanup {
-    if {$STMT!="0"} {
-      sqlite3_finalize $STMT
-    }
-    if {$DB2!="0"} {
-      set rc [sqlite3_close $DB2]
-    }
-  }
-}
-
-# Test handling of malloc() failures in sqlite3_errmsg16().
-#
-ifcapable utf16 {
-  do_malloc_test 18 -tclprep {
-    catch {
-      db eval "SELECT [string repeat longcolumnname 10] FROM sqlite_master"
-    }
-  } -tclbody {
-    set utf16 [sqlite3_errmsg16 [sqlite3_connection_pointer db]]
-    binary scan $utf16 c* bytes
-    if {[llength $bytes]==0} {
-      error "out of memory"
-    }
-  }
-}
-
-# This test is aimed at coverage testing. Specificly, it is supposed to
-# cause a malloc() only used when converting between the two utf-16 
-# encodings to fail (i.e. little-endian->big-endian). It only actually 
-# hits this malloc() on little-endian hosts.
-#
-set static_string "\x00h\x00e\x00l\x00l\x00o"
-for {set l 0} {$l<10} {incr l} {
-  append static_string $static_string
-}
-append static_string "\x00\x00"
-do_malloc_test 19 -tclprep {
-  execsql {
-    PRAGMA encoding = "UTF16be";
-    CREATE TABLE abc(a, b, c);
-  }
-} -tclbody {
-  unset -nocomplain ::STMT
-  set r [catch {
-    set ::STMT [sqlite3_prepare db {SELECT ?} -1 DUMMY]
-    sqlite3_bind_text16 -static $::STMT 1 $static_string 112
-  } msg]
-  if {$r} {error [string range $msg 4 end]}
-  set msg
-} -cleanup {
-  if {[info exists ::STMT]} {
-    sqlite3_finalize $::STMT
-  }
-}
-unset static_string
-
-# Make sure SQLITE_NOMEM is reported out on an ATTACH failure even
-# when the malloc failure occurs within the nested parse.
-#
-ifcapable attach {
-  do_malloc_test 20 -tclprep {
-    db close
-    forcedelete test2.db test2.db-journal
-    sqlite3 db test2.db
-    sqlite3_extended_result_codes db 1
-    db eval {CREATE TABLE t1(x);}
-    db close
-  } -tclbody {
-    if {[catch {sqlite3 db test.db}]} {
-      error "out of memory"
-    }
-    sqlite3_extended_result_codes db 1
-  } -sqlbody {
-    ATTACH DATABASE 'test2.db' AS t2;
-    SELECT * FROM t1;
-    DETACH DATABASE t2;
-  } 
-}
-
-# Test malloc failure whilst installing a foreign key.
-#
-ifcapable foreignkey {
-  do_malloc_test 21 -sqlbody {
-    CREATE TABLE abc(a, b, c, FOREIGN KEY(a) REFERENCES abc(b))
-  } 
-}
-
-# Test malloc failure in an sqlite3_prepare_v2() call.
-#
-do_malloc_test 22 -tclbody {
-  set ::STMT ""
-  set r [catch {
-    set ::STMT [
-      sqlite3_prepare_v2 db "SELECT * FROM sqlite_master" -1 DUMMY
-    ]
-  } msg]
-  if {$r} {error [string range $msg 4 end]}
-} -cleanup {
-  if {$::STMT ne ""} {
-    sqlite3_finalize $::STMT
-    set ::STMT ""
-  }
-}
-
-ifcapable {pager_pragmas} {
-  # This tests a special case - that an error that occurs while the pager
-  # is trying to recover from error-state in exclusive-access mode works.
-  #
-  do_malloc_test 23 -tclprep {
-    db eval {
-      PRAGMA cache_size = 10;
-      PRAGMA locking_mode = exclusive;
-      BEGIN;
-      CREATE TABLE abc(a, b, c);
-      CREATE INDEX abc_i ON abc(a, b, c);
-      INSERT INTO abc 
-        VALUES(randstr(100,100), randstr(100,100), randstr(100,100));
-      INSERT INTO abc 
-        SELECT randstr(100,100), randstr(100,100), randstr(100,100) FROM abc;
-      INSERT INTO abc 
-        SELECT randstr(100,100), randstr(100,100), randstr(100,100) FROM abc;
-      INSERT INTO abc 
-        SELECT randstr(100,100), randstr(100,100), randstr(100,100) FROM abc;
-      INSERT INTO abc 
-        SELECT randstr(100,100), randstr(100,100), randstr(100,100) FROM abc;
-      INSERT INTO abc 
-        SELECT randstr(100,100), randstr(100,100), randstr(100,100) FROM abc;
-      COMMIT;
-    }
-  
-    # This puts the pager into error state.
-    #
-    db eval BEGIN
-    db eval {UPDATE abc SET a = 0 WHERE oid%2}
-    set ::sqlite_io_error_pending 10
-    catch {db eval {ROLLBACK}} msg
-
-  } -tclbody {
-    # If an out-of-memory occurs within a call to a VFS layer function during
-    # hot-journal rollback, sqlite will report SQLITE_CORRUPT. See commit
-    # [5668] for details.
-    set rc [catch {db eval { SELECT * FROM abc LIMIT 10 }} msg]
-    if {$msg eq "database disk image is malformed"} { set msg "out of memory" }
-    if {$rc} { error $msg }
-    set msg
-  } -cleanup {
-    set e [db eval {PRAGMA integrity_check}]
-    if {$e ne "ok"} {error $e}
-  }
-}
-
-ifcapable compound {
-  do_malloc_test 24 -sqlprep {
-    CREATE TABLE t1(a, b, c)
-  } -sqlbody {
-    SELECT 1 FROM t1 UNION SELECT 2 FROM t1 ORDER BY 1
-  }
-}
-
-ifcapable view&&trigger {
-  do_malloc_test 25 -sqlprep {
-    CREATE TABLE t1(a, b, c);
-    CREATE VIEW v1 AS SELECT * FROM t1;
-    CREATE TRIGGER v1t1 INSTEAD OF DELETE ON v1 BEGIN SELECT 1; END;
-    CREATE TRIGGER v1t2 INSTEAD OF INSERT ON v1 BEGIN SELECT 1; END;
-    CREATE TRIGGER v1t3 INSTEAD OF UPDATE ON v1 BEGIN SELECT 1; END;
-  } -sqlbody {
-    DELETE FROM v1 WHERE a = 1;
-    INSERT INTO v1 VALUES(1, 2, 3);
-    UPDATE v1 SET a = 1 WHERE b = 2;
-  }
-}
-
-do_malloc_test 25 -sqlprep {
-  CREATE TABLE abc(a, b, c);
-  CREATE INDEX i1 ON abc(a, b);
-  INSERT INTO abc VALUES(1, 2, 3);
-  INSERT INTO abc VALUES(4, 5, 6);
-} -tclbody {
-  # For each UPDATE executed, the cursor used for the SELECT statement
-  # must be "saved". Because the cursor is open on an index, this requires
-  # a malloc() to allocate space to save the index key. This test case is
-  # aimed at testing the response of the library to a failure in that
-  # particular malloc() call.
-  db eval {SELECT a FROM abc ORDER BY a} {
-    db eval {UPDATE abc SET b = b - 1 WHERE a = $a}
-  }
-}
-
-# This test is designed to test a specific juncture in the sqlite code.
-# The database set up by -sqlprep script contains a single table B-Tree
-# of height 2. In the -tclbody script, the existing database connection
-# is closed and a new one opened and used to insert a new row into the
-# table B-Tree. By using a new connection, the outcome of a malloc() 
-# failure while seeking to the right-hand side of the B-Tree to insert 
-# a new record can be tested.
-#
-do_malloc_test 26 -sqlprep {
-  BEGIN;
-  CREATE TABLE t1(a, b);
-  INSERT INTO t1 VALUES(1, randomblob(210));
-  INSERT INTO t1 VALUES(1, randomblob(210));
-  INSERT INTO t1 VALUES(1, randomblob(210));
-  INSERT INTO t1 VALUES(1, randomblob(210));
-  INSERT INTO t1 VALUES(1, randomblob(210));
-  COMMIT;
-} -tclbody {
-  db close
-  sqlite3 db test.db
-  db eval { INSERT INTO t1 VALUES(1, randomblob(210)) }
-}
-
-# Test that no memory is leaked following a malloc() failure in
-# sqlite3_initialize().
-#
-do_malloc_test 27 -tclprep {
-  db close
-  sqlite3_shutdown
-} -tclbody {
-  set rc [sqlite3_initialize]
-  if {$rc == "SQLITE_NOMEM"} {
-    error "out of memory"
-  }
-}
-autoinstall_test_functions
-
-# Test that malloc failures that occur while processing INDEXED BY
-# clauses are handled correctly.
-do_malloc_test 28 -sqlprep {
-  CREATE TABLE t1(a, b);
-  CREATE INDEX i1 ON t1(a);
-  CREATE VIEW v1 AS SELECT * FROM t1 INDEXED BY i1 WHERE a = 10;
-} -sqlbody {
-  SELECT * FROM t1 INDEXED BY i1 ORDER BY a;
-  SELECT * FROM v1;
-}
-
-do_malloc_test 29 -sqlprep {
-  CREATE TABLE t1(a TEXT, b TEXT);
-} -sqlbody {
-  INSERT INTO t1 VALUES(1, -234);
-  INSERT INTO t1 SELECT * FROM t1 UNION ALL SELECT * FROM t1;
-}
-
-do_malloc_test 30 -tclprep {
-  db eval {
-    CREATE TABLE t1(x PRIMARY KEY);
-    INSERT INTO t1 VALUES(randstr(500,500));
-    INSERT INTO t1 VALUES(randstr(500,500));
-    INSERT INTO t1 VALUES(randstr(500,500));
-  }
-  db close
-  sqlite3 db test.db
-
-  # The DELETE command in the following block moves the overflow pages that
-  # are part of the primary key index to the free-list. But it does not
-  # actually load the content of the pages. This leads to the peculiar
-  # situation where cache entries exist, but are not populated with data.
-  # They are populated next time they are requested by the b-tree layer.
-  #
-  db eval {
-    BEGIN;
-      DELETE FROM t1;
-    ROLLBACK;
-  }
-} -sqlbody {
-  -- This statement requires the 'no-content' pages loaded by the DELETE
-  -- statement above. When requesting the pages, the content is loaded
-  -- from the database file. The point of this test case is to test handling
-  -- of malloc errors (including SQLITE_IOERR_NOMEM errors) when loading
-  -- the content.
-  SELECT * FROM t1 ORDER BY x;
-}
-
-# After committing a transaction in persistent-journal mode, if a journal
-# size limit is configured SQLite may attempt to truncate the journal file.
-# This test verifies the libraries response to a malloc() failure during
-# this operation.
-#
-do_malloc_test 31 -sqlprep {
-  PRAGMA journal_mode = persist;
-  PRAGMA journal_size_limit = 1024;
-  CREATE TABLE t1(a PRIMARY KEY, b);
-} -sqlbody {
-  INSERT INTO t1 VALUES(1, 2);
-}
-
-# When written, this test provoked an obscure change-counter bug.
-# 
-# If, when running in exclusive mode, a malloc() failure occurs
-# after the database file change-counter has been written but
-# before the transaction has been committed, then the transaction
-# is automatically rolled back. However, internally the 
-# Pager.changeCounterDone flag was being left set. This means
-# that if the same connection attempts another transaction following
-# the malloc failure and rollback, the change counter will not
-# be updated. This could corrupt another processes cache.
-#
-do_malloc_test 32 -tclprep {
-  # Build a small database containing an indexed table.
-  #
-  db eval {
-    PRAGMA locking_mode = normal;
-    BEGIN;
-    CREATE TABLE t1(a PRIMARY KEY, b);
-    INSERT INTO t1 VALUES(1, 'one');
-    INSERT INTO t1 VALUES(2, 'two');
-    INSERT INTO t1 VALUES(3, 'three');
-    COMMIT;
-    PRAGMA locking_mode = exclusive;
-  }
-
-  # Open a second database connection. Load the table (but not index)
-  # into the second connections pager cache.
-  #
-  sqlite3 db2 test.db
-  db2 eval { 
-    PRAGMA locking_mode = normal;
-    SELECT b FROM t1;
-  }
-
-} -tclbody {
-  # Running in exclusive mode, perform a database transaction that 
-  # modifies both the database table and index. For iterations where
-  # the malloc failure occurs after updating the change counter but
-  # before committing the transaction, this should result in the
-  # transaction being rolled back but the changeCounterDone flag
-  # left set.
-  #
-  db eval { UPDATE t1 SET a = a + 3 }
-} -cleanup {
-
-  # Perform another transaction using the first connection. Unlock
-  # the database after doing so. If this is one of the right iterations,
-  # then this should result in the database contents being updated but
-  # the change-counter left as it is.
-  #
-  db eval { 
-    PRAGMA locking_mode = normal;
-    UPDATE t1 SET a = a + 3;
-  }
-
-  # Now do an integrity check with the second connection. The second
-  # connection still has the database table in its cache. If this is
-  # one of the magic iterations and the change counter was not modified,
-  # then it won't realize that the cached data is out of date. Since
-  # the cached data won't match the up to date index data read from
-  # the database file, the integrity check should fail.
-  #
-  set zRepeat "transient"
-  if {$::iRepeat} {set zRepeat "persistent"}
-  do_test malloc-32.$zRepeat.${::n}.integrity {
-    execsql {PRAGMA integrity_check} db2
-  } {ok}
-  db2 close
-}
-
-# The following two OOM tests verify that OOM handling works in the
-# code used to optimize "SELECT count(*) FROM <tbl>".
-#
-do_malloc_test 33 -tclprep {
-  db eval { PRAGMA cache_size = 10 }
-  db transaction {
-    db eval { CREATE TABLE abc(a, b) }
-    for {set i 0} {$i<500} {incr i} {
-      db eval {INSERT INTO abc VALUES(randstr(100,100), randstr(1000,1000))}
-    }
-  }
-} -sqlbody {
-  SELECT count(*) FROM abc;
-}
-do_malloc_test 34 -tclprep {
-  db eval { PRAGMA cache_size = 10 }
-  db transaction {
-    db eval { CREATE TABLE abc(a PRIMARY KEY, b) }
-    for {set i 0} {$i<500} {incr i} {
-      db eval {INSERT INTO abc VALUES(randstr(100,100), randstr(1000,1000))}
-    }
-  }
-} -sqlbody {
-  SELECT count(*) FROM abc;
-}
-
-proc f {args} { error "Quite a long error!" }
-do_malloc_test 35 -tclprep {
-  db func f f
-  set ::STMT [sqlite3_prepare db "SELECT f()" -1 DUMMY]
-  sqlite3_step $::STMT
-} -tclbody {
-  sqlite3_finalize $::STMT
-} -cleanup {
-  # At one point an assert( !db->mallocFailed ) could fail in the following
-  # call to sqlite3_errmsg(). Because sqlite3_finalize() had failed to clear
-  # the flag before returning.
-  sqlite3_errmsg16 db
-}
-
-do_malloc_test 36 -sqlprep {
-  CREATE TABLE t1(a, b);
-  INSERT INTO t1 VALUES(1, 2);
-  INSERT INTO t1 VALUES(3, 4);
-} -sqlbody {
-  SELECT test_agg_errmsg16(), group_concat(a) FROM t1
-}
-
-# At one point, if an OOM occurred immediately after obtaining a shared lock
-# on the database file, the file remained locked. This test case ensures
-# that bug has been fixed.i
-if {[db eval {PRAGMA locking_mode}]!="exclusive"} {
-  do_malloc_test 37 -tclprep {
-    sqlite3 db2 test.db
-    execsql {
-      CREATE TABLE t1(a, b);
-      INSERT INTO t1 VALUES(1, 2);
-    } db2
-  } -sqlbody {
-    SELECT * FROM t1;
-  } -cleanup {
-    # Try to write to the database using connection [db2]. If connection [db]
-    # has correctly released the shared lock, this write attempt should 
-    # succeed. If [db] has not released the lock, this should hit an 
-    # SQLITE_BUSY error.
-    do_test malloc-36.$zRepeat.${::n}.unlocked {
-      execsql {INSERT INTO t1 VALUES(3, 4)} db2
-    } {}
-    db2 close
-  }
-  catch { db2 close }
-}
-
-
-# Test that if an OOM error occurs, aux-data is still correctly destroyed.
-# This test case was causing either a memory-leak or an assert() failure
-# at one point, depending on the configuration.
-#
-do_malloc_test 39 -tclprep {
-  sqlite3 db test.db
-} -sqlbody {
-  SELECT test_auxdata('abc', 'def');
-} -cleanup {
-  db close
-}
-
-# Ensure that no file descriptors were leaked.
-do_test malloc-99.X {
-  catch {db close}
-  set sqlite_open_file_count
-} {0}
-
-puts open-file-count=$sqlite_open_file_count
-finish_test