diff options
| -rw-r--r-- | bsp/k210/.config | 36 | ||||
| -rw-r--r-- | bsp/k210/driver/board.c | 22 | ||||
| -rw-r--r-- | bsp/k210/rtconfig.h | 159 | ||||
| -rw-r--r-- | bsp/k210/rtconfig.py | 5 | ||||
| -rw-r--r-- | libcpu/risc-v/common/context_gcc.S | 100 | ||||
| -rw-r--r-- | libcpu/risc-v/common/cpuport.c | 24 | ||||
| -rw-r--r-- | libcpu/risc-v/k210/cpuport_smp.c | 80 | ||||
| -rw-r--r-- | libcpu/risc-v/k210/interrupt.c | 104 | ||||
| -rw-r--r-- | libcpu/risc-v/k210/interrupt_gcc.S | 9 | ||||
| -rw-r--r-- | libcpu/risc-v/k210/startup_gcc.S | 31 |
10 files changed, 489 insertions, 81 deletions
diff --git a/bsp/k210/.config b/bsp/k210/.config index a9737f1c80..65164c210d 100644 --- a/bsp/k210/.config +++ b/bsp/k210/.config @@ -7,7 +7,8 @@ # RT-Thread Kernel # CONFIG_RT_NAME_MAX=8 -# CONFIG_RT_USING_SMP is not set +CONFIG_RT_USING_SMP=y +CONFIG_RT_CPUS_NR=2 CONFIG_RT_ALIGN_SIZE=8 # CONFIG_RT_THREAD_PRIORITY_8 is not set CONFIG_RT_THREAD_PRIORITY_32=y @@ -326,39 +327,6 @@ CONFIG_PKG_KENDRYTE_SDK_VER="v0.5.2" # CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_TINYFRAME is not set # CONFIG_PKG_USING_KENDRYTE_DEMO is not set -# CONFIG_PKG_USING_KENDRYTE_DEMO_V001 is not set -# CONFIG_PKG_USING_KENDRYTE_DEMO_LATEST_VERSION is not set -# CONFIG_KENDRYTE_DEMO_NONE is not set -# CONFIG_KENDRYTE_DEMO_AES_128_TEST is not set -# CONFIG_KENDRYTE_DEMO_AES_192_TEST is not set -# CONFIG_KENDRYTE_DEMO_AES_256_TEST is not set -# CONFIG_KENDRYTE_DEMO_AI_DEMO_SIM is not set -# CONFIG_KENDRYTE_DEMO_DVP_OV is not set -# CONFIG_KENDRYTE_DEMO_FACE_DETECT is not set -# CONFIG_KENDRYTE_DEMO_FFT_TEST is not set -# CONFIG_KENDRYTE_DEMO_FLASH_W25QXX is not set -# CONFIG_KENDRYTE_DEMO_FLASH_W25QXX_DMA_TEST is not set -# CONFIG_KENDRYTE_DEMO_FLASH_W25QXX_TEST is not set -# CONFIG_KENDRYTE_DEMO_GPIOHS_LED is not set -# CONFIG_KENDRYTE_DEMO_GPIO_LED is not set -# CONFIG_KENDRYTE_DEMO_HELLO_WORLD is not set -# CONFIG_KENDRYTE_DEMO_I2C_SLAVE is not set -# CONFIG_KENDRYTE_DEMO_KPU is not set -# CONFIG_KENDRYTE_DEMO_LCD is not set -# CONFIG_KENDRYTE_DEMO_MIC_PLAY is not set -# CONFIG_KENDRYTE_DEMO_PLAY_PCM is not set -# CONFIG_KENDRYTE_DEMO_PWM is not set -# CONFIG_KENDRYTE_DEMO_RTC is not set -# CONFIG_KENDRYTE_DEMO_RTC_SD3068 is not set -# CONFIG_KENDRYTE_DEMO_SD_CARD is not set -# CONFIG_KENDRYTE_DEMO_SERVO is not set -# CONFIG_KENDRYTE_DEMO_SHA256_TEST is not set -# CONFIG_KENDRYTE_DEMO_TIMER is not set -# CONFIG_KENDRYTE_DEMO_UART is not set -# CONFIG_KENDRYTE_DEMO_UART_DMA is not set -# CONFIG_KENDRYTE_DEMO_UART_DMA_IRQ is not set -# CONFIG_KENDRYTE_DEMO_UART_INTERRUPT is not set -# CONFIG_KENDRYTE_DEMO_WATCHDOG is not set # # samples: kernel and components samples diff --git a/bsp/k210/driver/board.c b/bsp/k210/driver/board.c index aac2adbc49..1b2b4c34e8 100644 --- a/bsp/k210/driver/board.c +++ b/bsp/k210/driver/board.c @@ -37,21 +37,14 @@ void init_bss(void) } } -void cpu_entry(int cpuid) +void primary_cpu_entry(void) { extern void entry(void); /* disable global interrupt */ + init_bss(); rt_hw_interrupt_disable(); - if (cpuid == 0) - { - init_bss(); - entry(); - } - else - { - while (1) ; - } + entry(); } #include <clint.h> @@ -85,6 +78,10 @@ int freq(void) } MSH_CMD_EXPORT(freq, show freq info); +#ifdef RT_USING_SMP +extern int rt_hw_clint_ipi_enable(void); +#endif + void rt_hw_board_init(void) { /* Init FPIOA */ @@ -96,8 +93,13 @@ void rt_hw_board_init(void) rt_hw_interrupt_init(); /* initialize hardware interrupt */ rt_hw_uart_init(); + rt_hw_tick_init(); +#ifdef RT_USING_SMP + rt_hw_clint_ipi_enable(); +#endif + #ifdef RT_USING_CONSOLE /* set console device */ rt_console_set_device(RT_CONSOLE_DEVICE_NAME); diff --git a/bsp/k210/rtconfig.h b/bsp/k210/rtconfig.h index b5fe0dfd48..94844cbf88 100644 --- a/bsp/k210/rtconfig.h +++ b/bsp/k210/rtconfig.h @@ -7,8 +7,12 @@ /* RT-Thread Kernel */ #define RT_NAME_MAX 8 +#define RT_USING_SMP +#define RT_CPUS_NR 2 #define RT_ALIGN_SIZE 8 +/* RT_THREAD_PRIORITY_8 is not set */ #define RT_THREAD_PRIORITY_32 +/* RT_THREAD_PRIORITY_256 is not set */ #define RT_THREAD_PRIORITY_MAX 32 #define RT_TICK_PER_SECOND 100 #define RT_USING_OVERFLOW_CHECK @@ -16,9 +20,19 @@ #define RT_USING_IDLE_HOOK #define RT_IDEL_HOOK_LIST_SIZE 4 #define IDLE_THREAD_STACK_SIZE 1024 +/* RT_USING_TIMER_SOFT is not set */ #define RT_DEBUG #define RT_DEBUG_INIT_CONFIG #define RT_DEBUG_INIT 1 +/* RT_DEBUG_THREAD_CONFIG is not set */ +/* RT_DEBUG_SCHEDULER_CONFIG is not set */ +/* RT_DEBUG_IPC_CONFIG is not set */ +/* RT_DEBUG_TIMER_CONFIG is not set */ +/* RT_DEBUG_IRQ_CONFIG is not set */ +/* RT_DEBUG_MEM_CONFIG is not set */ +/* RT_DEBUG_SLAB_CONFIG is not set */ +/* RT_DEBUG_MEMHEAP_CONFIG is not set */ +/* RT_DEBUG_MODULE_CONFIG is not set */ /* Inter-Thread communication */ @@ -27,16 +41,23 @@ #define RT_USING_EVENT #define RT_USING_MAILBOX #define RT_USING_MESSAGEQUEUE +/* RT_USING_SIGNALS is not set */ /* Memory Management */ #define RT_USING_MEMPOOL +/* RT_USING_MEMHEAP is not set */ +/* RT_USING_NOHEAP is not set */ #define RT_USING_SMALL_MEM +/* RT_USING_SLAB is not set */ +/* RT_USING_MEMTRACE is not set */ #define RT_USING_HEAP /* Kernel Device Object */ #define RT_USING_DEVICE +/* RT_USING_DEVICE_OPS is not set */ +/* RT_USING_INTERRUPT_INFO is not set */ #define RT_USING_CONSOLE #define RT_CONSOLEBUF_SIZE 128 #define RT_CONSOLE_DEVICE_NAME "uarths" @@ -44,6 +65,7 @@ #define ARCH_CPU_64BIT #define ARCH_RISCV #define ARCH_RISCV64 +/* ARCH_CPU_STACK_GROWS_UPWARD is not set */ /* RT-Thread Components */ @@ -54,6 +76,7 @@ /* C++ features */ +/* RT_USING_CPLUSPLUS is not set */ /* Command shell */ @@ -63,9 +86,11 @@ #define FINSH_HISTORY_LINES 5 #define FINSH_USING_SYMTAB #define FINSH_USING_DESCRIPTION +/* FINSH_ECHO_DISABLE_DEFAULT is not set */ #define FINSH_THREAD_PRIORITY 20 #define FINSH_THREAD_STACK_SIZE 16384 #define FINSH_CMD_SIZE 80 +/* FINSH_USING_AUTH is not set */ #define FINSH_USING_MSH #define FINSH_USING_MSH_DEFAULT #define FINSH_USING_MSH_ONLY @@ -78,7 +103,13 @@ #define DFS_FILESYSTEMS_MAX 4 #define DFS_FILESYSTEM_TYPES_MAX 4 #define DFS_FD_MAX 16 +/* RT_USING_DFS_MNTTABLE is not set */ +/* RT_USING_DFS_ELMFAT is not set */ #define RT_USING_DFS_DEVFS +/* RT_USING_DFS_ROMFS is not set */ +/* RT_USING_DFS_RAMFS is not set */ +/* RT_USING_DFS_UFFS is not set */ +/* RT_USING_DFS_JFFS2 is not set */ /* Device Drivers */ @@ -86,87 +117,215 @@ #define RT_PIPE_BUFSZ 512 #define RT_USING_SERIAL #define RT_SERIAL_USING_DMA +/* RT_USING_CAN is not set */ +/* RT_USING_HWTIMER is not set */ +/* RT_USING_CPUTIME is not set */ +/* RT_USING_I2C is not set */ +/* RT_USING_PIN is not set */ +/* RT_USING_ADC is not set */ +/* RT_USING_PWM is not set */ +/* RT_USING_MTD_NOR is not set */ +/* RT_USING_MTD_NAND is not set */ +/* RT_USING_MTD is not set */ +/* RT_USING_PM is not set */ +/* RT_USING_RTC is not set */ +/* RT_USING_SDIO is not set */ +/* RT_USING_SPI is not set */ +/* RT_USING_WDT is not set */ +/* RT_USING_AUDIO is not set */ /* Using WiFi */ +/* RT_USING_WIFI is not set */ /* Using USB */ +/* RT_USING_USB_HOST is not set */ +/* RT_USING_USB_DEVICE is not set */ /* POSIX layer and C standard library */ #define RT_USING_LIBC +/* RT_USING_PTHREADS is not set */ #define RT_USING_POSIX +/* RT_USING_POSIX_MMAP is not set */ +/* RT_USING_POSIX_TERMIOS is not set */ +/* RT_USING_POSIX_AIO is not set */ +/* RT_USING_MODULE is not set */ /* Network */ /* Socket abstraction layer */ +/* RT_USING_SAL is not set */ /* light weight TCP/IP stack */ +/* RT_USING_LWIP is not set */ /* Modbus master and slave stack */ +/* RT_USING_MODBUS is not set */ /* AT commands */ +/* RT_USING_AT is not set */ /* VBUS(Virtual Software BUS) */ +/* RT_USING_VBUS is not set */ /* Utilities */ +/* RT_USING_LOGTRACE is not set */ +/* RT_USING_RYM is not set */ +/* RT_USING_ULOG is not set */ +/* RT_USING_UTEST is not set */ /* RT-Thread online packages */ /* IoT - internet of things */ +/* PKG_USING_PAHOMQTT is not set */ +/* PKG_USING_WEBCLIENT is not set */ +/* PKG_USING_WEBNET is not set */ +/* PKG_USING_MONGOOSE is not set */ +/* PKG_USING_WEBTERMINAL is not set */ +/* PKG_USING_CJSON is not set */ +/* PKG_USING_JSMN is not set */ +/* PKG_USING_LJSON is not set */ +/* PKG_USING_EZXML is not set */ +/* PKG_USING_NANOPB is not set */ /* Wi-Fi */ /* Marvell WiFi */ +/* PKG_USING_WLANMARVELL is not set */ /* Wiced WiFi */ +/* PKG_USING_WLAN_WICED is not set */ +/* PKG_USING_COAP is not set */ +/* PKG_USING_NOPOLL is not set */ +/* PKG_USING_NETUTILS is not set */ +/* PKG_USING_AT_DEVICE is not set */ +/* PKG_USING_WIZNET is not set */ /* IoT Cloud */ +/* PKG_USING_ONENET is not set */ +/* PKG_USING_GAGENT_CLOUD is not set */ +/* PKG_USING_ALI_IOTKIT is not set */ +/* PKG_USING_AZURE is not set */ +/* PKG_USING_TENCENT_IOTKIT is not set */ /* security packages */ +/* PKG_USING_MBEDTLS is not set */ +/* PKG_USING_libsodium is not set */ +/* PKG_USING_TINYCRYPT is not set */ /* language packages */ +/* PKG_USING_LUA is not set */ +/* PKG_USING_JERRYSCRIPT is not set */ +/* PKG_USING_MICROPYTHON is not set */ /* multimedia packages */ +/* PKG_USING_OPENMV is not set */ +/* PKG_USING_MUPDF is not set */ /* tools packages */ +/* PKG_USING_CMBACKTRACE is not set */ +/* PKG_USING_EASYFLASH is not set */ +/* PKG_USING_EASYLOGGER is not set */ +/* PKG_USING_SYSTEMVIEW is not set */ +/* PKG_USING_RDB is not set */ +/* PKG_USING_QRCODE is not set */ +/* PKG_USING_ULOG_EASYFLASH is not set */ /* system packages */ +/* PKG_USING_GUIENGINE is not set */ +/* PKG_USING_CAIRO is not set */ +/* PKG_USING_PIXMAN is not set */ +/* PKG_USING_LWEXT4 is not set */ +/* PKG_USING_PARTITION is not set */ +/* PKG_USING_FAL is not set */ +/* PKG_USING_SQLITE is not set */ +/* PKG_USING_RTI is not set */ +/* PKG_USING_LITTLEVGL2RTT is not set */ +/* PKG_USING_CMSIS is not set */ +/* PKG_USING_DFS_YAFFS is not set */ +/* PKG_USING_LITTLEFS is not set */ /* peripheral libraries and drivers */ +/* PKG_USING_REALTEK_AMEBA is not set */ +/* PKG_USING_SHT2X is not set */ +/* PKG_USING_AHT10 is not set */ +/* PKG_USING_AP3216C is not set */ +/* PKG_USING_STM32_SDIO is not set */ +/* PKG_USING_ICM20608 is not set */ +/* PKG_USING_U8G2 is not set */ +/* PKG_USING_BUTTON is not set */ +/* PKG_USING_MPU6XXX is not set */ +/* PKG_USING_PCF8574 is not set */ #define PKG_USING_KENDRYTE_SDK #define PKG_USING_KENDRYTE_SDK_V052 +/* PKG_USING_KENDRYTE_SDK_LATEST_VERSION is not set */ /* miscellaneous packages */ +/* PKG_USING_LIBCSV is not set */ +/* PKG_USING_OPTPARSE is not set */ +/* PKG_USING_FASTLZ is not set */ +/* PKG_USING_MINILZO is not set */ +/* PKG_USING_QUICKLZ is not set */ +/* PKG_USING_MULTIBUTTON is not set */ +/* PKG_USING_CANFESTIVAL is not set */ +/* PKG_USING_ZLIB is not set */ +/* PKG_USING_DSTR is not set */ +/* PKG_USING_TINYFRAME is not set */ +/* PKG_USING_KENDRYTE_DEMO is not set */ /* samples: kernel and components samples */ +/* PKG_USING_KERNEL_SAMPLES is not set */ +/* PKG_USING_FILESYSTEM_SAMPLES is not set */ +/* PKG_USING_NETWORK_SAMPLES is not set */ +/* PKG_USING_PERIPHERAL_SAMPLES is not set */ +/* PKG_USING_HELLO is not set */ /* Privated Packages of RealThread */ +/* PKG_USING_CODEC is not set */ +/* PKG_USING_PLAYER is not set */ +/* PKG_USING_PERSIMMON_SRC is not set */ +/* PKG_USING_JS_PERSIMMON is not set */ +/* PKG_USING_JERRYSCRIPT_WIN32 is not set */ /* Network Utilities */ +/* PKG_USING_WICED is not set */ +/* PKG_USING_CLOUDSDK is not set */ +/* PKG_USING_COREMARK is not set */ +/* PKG_USING_POWER_MANAGER is not set */ +/* PKG_USING_RT_OTA is not set */ +/* PKG_USING_RDBD_SRC is not set */ +/* PKG_USING_RTINSIGHT is not set */ +/* PKG_USING_SMARTCONFIG is not set */ +/* PKG_USING_RTX is not set */ #define BOARD_K210_EVB #define BSP_USING_UART_HS +/* BSP_USING_UART1 is not set */ +/* BSP_USING_UART2 is not set */ +/* BSP_USING_UART3 is not set */ +/* BSP_USING_I2C1 is not set */ +/* BSP_USING_SPI1 is not set */ #define __STACKSIZE__ 4096 #endif diff --git a/bsp/k210/rtconfig.py b/bsp/k210/rtconfig.py index 418c1d7456..4610f85adc 100644 --- a/bsp/k210/rtconfig.py +++ b/bsp/k210/rtconfig.py @@ -15,7 +15,7 @@ if os.getenv('RTT_CC'): if CROSS_TOOL == 'gcc': PLATFORM = 'gcc' - EXEC_PATH = r'/opt/riscv64-unknown-elf-gcc-2018.07.0-x86_64-linux-ubuntu14/bin' + EXEC_PATH = r'/opt/riscv64-unknown-elf/bin' else: print('Please make sure your toolchains is GNU GCC!') exit(0) @@ -27,8 +27,7 @@ BUILD = 'release' if PLATFORM == 'gcc': # toolchains - PREFIX = 'riscv-none-embed-' - # PREFIX = 'riscv64-unknown-elf-' + PREFIX = 'riscv64-unknown-elf-' CC = PREFIX + 'gcc' CXX = PREFIX + 'g++' AS = PREFIX + 'gcc' diff --git a/libcpu/risc-v/common/context_gcc.S b/libcpu/risc-v/common/context_gcc.S index 94ae5d9df4..62e64d8104 100644 --- a/libcpu/risc-v/common/context_gcc.S +++ b/libcpu/risc-v/common/context_gcc.S @@ -6,10 +6,16 @@ * Change Logs: * Date Author Notes * 2018/10/28 Bernard The unify RISC-V porting implementation + * 2018/12/27 Jesven Add SMP support */ #include "cpuport.h" +#ifdef RT_USING_SMP +#define rt_hw_interrupt_disable rt_hw_local_irq_disable +#define rt_hw_interrupt_enable rt_hw_local_irq_enable +#endif + /* * rt_base_t rt_hw_interrupt_disable(void); */ @@ -27,13 +33,23 @@ rt_hw_interrupt_enable: ret /* - * void rt_hw_context_switch_to(rt_ubase_t to) + * #ifdef RT_USING_SMP + * void rt_hw_context_switch_to(rt_ubase_t to, stuct rt_thread *to_thread); + * #else + * void rt_hw_context_switch_to(rt_ubase_t to); + * #endif * a0 --> to + * a1 --> to_thread */ .globl rt_hw_context_switch_to rt_hw_context_switch_to: LOAD sp, (a0) +#ifdef RT_USING_SMP + mv a0, a1 + jal rt_cpus_lock_status_restore +#endif + /* load epc from stack */ LOAD a0, 0 * REGBYTES(sp) csrw mepc, a0 @@ -74,9 +90,15 @@ rt_hw_context_switch_to: mret /* - * void rt_hw_context_switch(rt_ubase_t from, rt_ubase_t to) + * #ifdef RT_USING_SMP + * void rt_hw_context_switch(rt_ubase_t from, rt_ubase_t to, struct rt_thread *to_thread); + * #else + * void rt_hw_context_switch(rt_ubase_t from, rt_ubase_t to); + * #endif + * * a0 --> from * a1 --> to + * a2 --> to_thread */ .globl rt_hw_context_switch rt_hw_context_switch: @@ -136,6 +158,78 @@ save_mpie: */ LOAD sp, (a1) +#ifdef RT_USING_SMP + mv a0, a2 + jal rt_cpus_lock_status_restore +#endif /*RT_USING_SMP*/ + + /* resw ra to mepc */ + LOAD a1, 0 * REGBYTES(sp) + csrw mepc, a1 + LOAD x1, 1 * REGBYTES(sp) + + /* force to machin mode(MPP=11) */ + li a1, 0x00001800; + csrs mstatus, a1 + LOAD a1, 2 * REGBYTES(sp) + csrs mstatus, a1 + + LOAD x4, 4 * REGBYTES(sp) + LOAD x5, 5 * REGBYTES(sp) + LOAD x6, 6 * REGBYTES(sp) + LOAD x7, 7 * REGBYTES(sp) + LOAD x8, 8 * REGBYTES(sp) + LOAD x9, 9 * REGBYTES(sp) + LOAD x10, 10 * REGBYTES(sp) + LOAD x11, 11 * REGBYTES(sp) + LOAD x12, 12 * REGBYTES(sp) + LOAD x13, 13 * REGBYTES(sp) + LOAD x14, 14 * REGBYTES(sp) + LOAD x15, 15 * REGBYTES(sp) + LOAD x16, 16 * REGBYTES(sp) + LOAD x17, 17 * REGBYTES(sp) + LOAD x18, 18 * REGBYTES(sp) + LOAD x19, 19 * REGBYTES(sp) + LOAD x20, 20 * REGBYTES(sp) + LOAD x21, 21 * REGBYTES(sp) + LOAD x22, 22 * REGBYTES(sp) + LOAD x23, 23 * REGBYTES(sp) + LOAD x24, 24 * REGBYTES(sp) + LOAD x25, 25 * REGBYTES(sp) + LOAD x26, 26 * REGBYTES(sp) + LOAD x27, 27 * REGBYTES(sp) + LOAD x28, 28 * REGBYTES(sp) + LOAD x29, 29 * REGBYTES(sp) + LOAD x30, 30 * REGBYTES(sp) + LOAD x31, 31 * REGBYTES(sp) + + addi sp, sp, 32 * REGBYTES + mret + +#ifdef RT_USING_SMP +/* + * void rt_hw_context_switch_interrupt(void *context, rt_ubase_t from, rt_ubase_t to, struct rt_thread *to_thread); + * + * a0 --> context + * a1 --> from + * a2 --> to + * a3 --> to_thread + */ + .globl rt_hw_context_switch_interrupt +rt_hw_context_switch_interrupt: + + STORE a0, 0(a1) + + csrr a1, mepc + STORE a1, 0 * REGBYTES(a0) + + csrr a1, mstatus + STORE a1, 2 * REGBYTES(a0) + + LOAD sp, 0(a2) + move a0, a3 + call rt_cpus_lock_status_restore + /* resw ra to mepc */ LOAD a1, 0 * REGBYTES(sp) csrw mepc, a1 @@ -178,3 +272,5 @@ save_mpie: addi sp, sp, 32 * REGBYTES mret + +#endif diff --git a/libcpu/risc-v/common/cpuport.c b/libcpu/risc-v/common/cpuport.c index 2ad77b99c5..a44dc40f79 100644 --- a/libcpu/risc-v/common/cpuport.c +++ b/libcpu/risc-v/common/cpuport.c @@ -13,9 +13,11 @@ #include "cpuport.h" +#ifndef RT_USING_SMP volatile rt_ubase_t rt_interrupt_from_thread = 0; volatile rt_ubase_t rt_interrupt_to_thread = 0; volatile rt_uint32_t rt_thread_switch_interrupt_flag = 0; +#endif struct rt_hw_stack_frame { @@ -93,6 +95,14 @@ rt_uint8_t *rt_hw_stack_init(void *tentry, return stk; } +/* + * #ifdef RT_USING_SMP + * void rt_hw_context_switch_interrupt(void *context, rt_ubase_t from, rt_ubase_t to, struct rt_thread *to_thread); + * #else + * void rt_hw_context_switch_interrupt(rt_ubase_t from, rt_ubase_t to); + * #endif + */ +#ifndef RT_USING_SMP void rt_hw_context_switch_interrupt(rt_ubase_t from, rt_ubase_t to) { if (rt_thread_switch_interrupt_flag == 0) @@ -103,3 +113,17 @@ void rt_hw_context_switch_interrupt(rt_ubase_t from, rt_ubase_t to) return ; } +#endif /* end of RT_USING_SMP */ + +/** shutdown CPU */ +void rt_hw_cpu_shutdown() +{ + rt_uint32_t level; + rt_kprintf("shutdown...\n"); + + level = rt_hw_interrupt_disable(); + while (level) + { + RT_ASSERT(0); + } +} diff --git a/libcpu/risc-v/k210/cpuport_smp.c b/libcpu/risc-v/k210/cpuport_smp.c new file mode 100644 index 0000000000..a31314a13f --- /dev/null +++ b/libcpu/risc-v/k210/cpuport_smp.c @@ -0,0 +1,80 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018/12/23 Bernard The first version + * 2018/12/27 Jesven Add secondary cpu boot + */ + +#include <rthw.h> +#include <rtthread.h> +#include <stdint.h> + +#include "board.h" +#include <encoding.h> +#include <clint.h> +#include <atomic.h> + +#ifdef RT_USING_SMP + +int rt_hw_cpu_id(void) +{ + return read_csr(mhartid); +} + +void rt_hw_spin_lock(rt_hw_spinlock_t *lock) +{ + spinlock_lock((spinlock_t *)lock); +} + +void rt_hw_spin_unlock(rt_hw_spinlock_t *lock) +{ + spinlock_unlock((spinlock_t *)lock); +} + +void rt_hw_ipi_send(int ipi_vector, unsigned int cpu_mask) +{ + int idx; + + for (idx = 0; idx < RT_CPUS_NR; idx ++) + { + if (cpu_mask & (1 << idx)) + { + clint_ipi_send(idx); + } + } +} + +extern rt_base_t secondary_boot_flag; +void rt_hw_secondary_cpu_up(void) +{ + mb(); + secondary_boot_flag = 0xa55a; +} + +extern void rt_hw_scondary_interrupt_init(void); +extern int rt_hw_tick_init(void); +extern int rt_hw_clint_ipi_enable(void); + +void secondary_cpu_c_start(void) +{ + rt_hw_spin_lock(&_cpus_lock); + + /* initialize interrupt controller */ + rt_hw_scondary_interrupt_init(); + + rt_hw_tick_init(); + + rt_hw_clint_ipi_enable(); + + rt_system_scheduler_start(); +} + +void rt_hw_secondary_cpu_idle_exec(void) +{ + asm volatile ("wfi"); +} +#endif /*RT_USING_SMP*/ diff --git a/libcpu/risc-v/k210/interrupt.c b/libcpu/risc-v/k210/interrupt.c index f9c3eb5a67..3d30e69ed2 100644 --- a/libcpu/risc-v/k210/interrupt.c +++ b/libcpu/risc-v/k210/interrupt.c @@ -6,6 +6,7 @@ * Change Logs: * Date Author Notes * 2018/10/01 Bernard The first version + * 2018/12/27 Jesven Change irq enable/disable to cpu0 */ #include <rthw.h> @@ -19,7 +20,7 @@ #define CPU_NUM 2 #define MAX_HANDLERS IRQN_MAX -static struct rt_irq_desc irq_desc[CPU_NUM][MAX_HANDLERS]; +static struct rt_irq_desc irq_desc[MAX_HANDLERS]; static rt_isr_handler_t rt_hw_interrupt_handle(rt_uint32_t vector, void *param) { @@ -27,6 +28,52 @@ static rt_isr_handler_t rt_hw_interrupt_handle(rt_uint32_t vector, void *param) return RT_NULL; } +int rt_hw_clint_ipi_enable(void) +{ + /* Set the Machine-Software bit in MIE */ + set_csr(mie, MIP_MSIP); + return 0; +} + +int rt_hw_clint_ipi_disable(void) +{ + /* Clear the Machine-Software bit in MIE */ + clear_csr(mie, MIP_MSIP); + return 0; +} + +int rt_hw_plic_irq_enable(plic_irq_t irq_number) +{ + unsigned long core_id = 0; + + /* Check parameters */ + if (PLIC_NUM_SOURCES < irq_number || 0 > irq_number) + return -1; + /* Get current enable bit array by IRQ number */ + uint32_t current = plic->target_enables.target[core_id].enable[irq_number / 32]; + /* Set enable bit in enable bit array */ + current |= (uint32_t)1 << (irq_number % 32); + /* Write back the enable bit array */ + plic->target_enables.target[core_id].enable[irq_number / 32] = current; + return 0; +} + +int rt_hw_plic_irq_disable(plic_irq_t irq_number) +{ + unsigned long core_id = 0; + + /* Check parameters */ + if (PLIC_NUM_SOURCES < irq_number || 0 > irq_number) + return -1; + /* Get current enable bit array by IRQ number */ + uint32_t current = plic->target_enables.target[core_id].enable[irq_number / 32]; + /* Clear enable bit in enable bit array */ + current &= ~((uint32_t)1 << (irq_number % 32)); + /* Write back the enable bit array */ + plic->target_enables.target[core_id].enable[irq_number / 32] = current; + return 0; +} + /** * This function will initialize hardware interrupt */ @@ -52,11 +99,11 @@ void rt_hw_interrupt_init(void) for (idx = 0; idx < MAX_HANDLERS; idx++) { rt_hw_interrupt_mask(idx); - irq_desc[cpuid][idx].handler = (rt_isr_handler_t)rt_hw_interrupt_handle; - irq_desc[cpuid][idx].param = RT_NULL; + irq_desc[idx].handler = (rt_isr_handler_t)rt_hw_interrupt_handle; + irq_desc[idx].param = RT_NULL; #ifdef RT_USING_INTERRUPT_INFO - rt_snprintf(irq_desc[cpuid][idx].name, RT_NAME_MAX - 1, "default"); - irq_desc[idx][cpuid].counter = 0; + rt_snprintf(irq_desc[idx].name, RT_NAME_MAX - 1, "default"); + irq_desc[idx].counter = 0; #endif } @@ -64,13 +111,31 @@ void rt_hw_interrupt_init(void) set_csr(mie, MIP_MEIP); } +void rt_hw_scondary_interrupt_init(void) +{ + int idx; + int cpuid; + + cpuid = current_coreid(); + + /* Disable all interrupts for the current core. */ + for (idx = 0; idx < ((PLIC_NUM_SOURCES + 32u) / 32u); idx ++) + plic->target_enables.target[cpuid].enable[idx] = 0; + + /* Set the threshold to zero. */ + plic->targets.target[cpuid].priority_threshold = 0; + + /* Enable machine external interrupts. */ + set_csr(mie, MIP_MEIP); +} + /** * This function will mask a interrupt. * @param vector the interrupt number */ void rt_hw_interrupt_mask(int vector) { - plic_irq_disable(vector); + rt_hw_plic_irq_disable(vector); } /** @@ -80,7 +145,7 @@ void rt_hw_interrupt_mask(int vector) void rt_hw_interrupt_umask(int vector) { plic_set_priority(vector, 1); - plic_irq_enable(vector); + rt_hw_plic_irq_enable(vector); } /** @@ -92,21 +157,18 @@ void rt_hw_interrupt_umask(int vector) rt_isr_handler_t rt_hw_interrupt_install(int vector, rt_isr_handler_t handler, void *param, const char *name) { - int cpuid; rt_isr_handler_t old_handler = RT_NULL; - cpuid = current_coreid(); - if(vector < MAX_HANDLERS) { - old_handler = irq_desc[cpuid][vector].handler; + old_handler = irq_desc[vector].handler; if (handler != RT_NULL) { - irq_desc[cpuid][vector].handler = (rt_isr_handler_t)handler; - irq_desc[cpuid][vector].param = param; + irq_desc[vector].handler = (rt_isr_handler_t)handler; + irq_desc[vector].param = param; #ifdef RT_USING_INTERRUPT_INFO - rt_snprintf(irq_desc[cpuid][vector].name, RT_NAME_MAX - 1, "%s", name); - irq_desc[cpuid][vector].counter = 0; + rt_snprintf(irq_desc[vector].name, RT_NAME_MAX - 1, "%s", name); + irq_desc[vector].counter = 0; #endif } } @@ -149,14 +211,14 @@ uintptr_t handle_irq_m_ext(uintptr_t cause, uintptr_t epc) /* Disable software interrupt and timer interrupt */ clear_csr(mie, MIP_MTIP | MIP_MSIP); - if (irq_desc[core_id][int_num].handler == (rt_isr_handler_t)rt_hw_interrupt_handle) + if (irq_desc[int_num].handler == (rt_isr_handler_t)rt_hw_interrupt_handle) { /* default handler, route to kendryte bsp plic driver */ plic_irq_handle(int_num); } - else if (irq_desc[core_id][int_num].handler) + else if (irq_desc[int_num].handler) { - irq_desc[core_id][int_num].handler(int_num, irq_desc[core_id][int_num].param); + irq_desc[int_num].handler(int_num, irq_desc[int_num].param); } /* Perform IRQ complete */ @@ -185,6 +247,12 @@ uintptr_t handle_trap(uintptr_t mcause, uintptr_t epc) switch (cause) { case IRQ_M_SOFT: + { + uint64_t core_id = current_coreid(); + + clint_ipi_clear(core_id); + rt_schedule(); + } break; case IRQ_M_EXT: handle_irq_m_ext(mcause, epc); diff --git a/libcpu/risc-v/k210/interrupt_gcc.S b/libcpu/risc-v/k210/interrupt_gcc.S index 5783322237..5d3e8368b1 100644 --- a/libcpu/risc-v/k210/interrupt_gcc.S +++ b/libcpu/risc-v/k210/interrupt_gcc.S @@ -6,6 +6,7 @@ * Change Logs: * Date Author Notes * 2018/10/02 Bernard The first version + * 2018/12/27 Jesven Add SMP schedule */ #include "cpuport.h" @@ -72,6 +73,13 @@ trap_entry: call handle_trap call rt_interrupt_leave +#ifdef RT_USING_SMP + /* s0 --> sp */ + mv a0, s0 + call rt_scheduler_do_irq_switch + mv sp, s0 +#else + /* switch to from_thread stack */ move sp, s0 @@ -94,6 +102,7 @@ trap_entry: LOAD a0, 0 * REGBYTES(sp) csrw mepc, a0 +#endif spurious_interrupt: LOAD x1, 1 * REGBYTES(sp) diff --git a/libcpu/risc-v/k210/startup_gcc.S b/libcpu/risc-v/k210/startup_gcc.S index 2e69c5021e..f5c0d8fa94 100644 --- a/libcpu/risc-v/k210/startup_gcc.S +++ b/libcpu/risc-v/k210/startup_gcc.S @@ -6,6 +6,7 @@ * Change Logs: * Date Author Notes * 2018/10/01 Bernard The first version + * 2018/12/27 Jesven Add SMP support */ #define MSTATUS_FS 0x00006000U /* initial state of FPU */ @@ -114,20 +115,22 @@ _start: add sp, sp, t1 /* sp = (cpuid + 1) * __STACKSIZE__ + __stack_start__ */ /* other cpu core, jump to cpu entry directly */ - bnez a0, _cpu_entry + bnez a0, secondary_cpu_entry + j primary_cpu_entry -#if 0 - /* clear bss section */ - la a0, __bss_start - la a1, __bss_end - bgeu a0, a1, 2f -1: - sw zero, (a0) - addi a0, a0, REGBYTES - bltu a0, a1, 1b -2: +secondary_cpu_entry: +#ifdef RT_USING_SMP + la a0, secondary_boot_flag + ld a0, 0(a0) + li a1, 0xa55a + beq a0, a1, secondary_cpu_c_start #endif + j secondary_cpu_entry -_cpu_entry: - csrr a0, mhartid - j cpu_entry +#ifdef RT_USING_SMP +.data +.global secondary_boot_flag +.align 3 +secondary_boot_flag: + .dword 0 +#endif |