diff options
Diffstat (limited to 'bsp/lpc54608-LPCXpresso/drivers')
| -rw-r--r-- | bsp/lpc54608-LPCXpresso/drivers/board.h | 2 | ||||
| -rw-r--r-- | bsp/lpc54608-LPCXpresso/drivers/drt_mpu.c | 6 | ||||
| -rw-r--r-- | bsp/lpc54608-LPCXpresso/drivers/drt_mpu.h | 2 | ||||
| -rw-r--r-- | bsp/lpc54608-LPCXpresso/drivers/drv_emac.c | 124 | ||||
| -rw-r--r-- | bsp/lpc54608-LPCXpresso/drivers/drv_emac.h | 2 | ||||
| -rw-r--r-- | bsp/lpc54608-LPCXpresso/drivers/drv_ft5406.c | 4 | ||||
| -rw-r--r-- | bsp/lpc54608-LPCXpresso/drivers/drv_i2c.c | 4 | ||||
| -rw-r--r-- | bsp/lpc54608-LPCXpresso/drivers/drv_lcd.c | 6 | ||||
| -rw-r--r-- | bsp/lpc54608-LPCXpresso/drivers/drv_sd.c | 28 | ||||
| -rw-r--r-- | bsp/lpc54608-LPCXpresso/drivers/drv_sd.h | 4 | ||||
| -rw-r--r-- | bsp/lpc54608-LPCXpresso/drivers/drv_sdram.h | 2 | ||||
| -rw-r--r-- | bsp/lpc54608-LPCXpresso/drivers/drv_sram.c | 2 | ||||
| -rw-r--r-- | bsp/lpc54608-LPCXpresso/drivers/drv_sram.h | 2 | ||||
| -rw-r--r-- | bsp/lpc54608-LPCXpresso/drivers/drv_uart.c | 6 |
14 files changed, 97 insertions, 97 deletions
diff --git a/bsp/lpc54608-LPCXpresso/drivers/board.h b/bsp/lpc54608-LPCXpresso/drivers/board.h index 679f33682f..db2ac831c5 100644 --- a/bsp/lpc54608-LPCXpresso/drivers/board.h +++ b/bsp/lpc54608-LPCXpresso/drivers/board.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2018, RT-Thread Development Team + * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * diff --git a/bsp/lpc54608-LPCXpresso/drivers/drt_mpu.c b/bsp/lpc54608-LPCXpresso/drivers/drt_mpu.c index c6c5d114e4..7e220327cb 100644 --- a/bsp/lpc54608-LPCXpresso/drivers/drt_mpu.c +++ b/bsp/lpc54608-LPCXpresso/drivers/drt_mpu.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2018, RT-Thread Development Team + * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * @@ -26,9 +26,9 @@ int rt_hw_mpu_init(void) { uint32_t rbar; uint32_t rasr; - + MPU_PRINT("\nnumber of regions: %d\n", (MPU->TYPE & MPU_TYPE_DREGION_Msk) >> MPU_TYPE_DREGION_Pos); - + /* Disable MPU */ ARM_MPU_Disable(); diff --git a/bsp/lpc54608-LPCXpresso/drivers/drt_mpu.h b/bsp/lpc54608-LPCXpresso/drivers/drt_mpu.h index ff34c225e7..782f6fce08 100644 --- a/bsp/lpc54608-LPCXpresso/drivers/drt_mpu.h +++ b/bsp/lpc54608-LPCXpresso/drivers/drt_mpu.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2018, RT-Thread Development Team + * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * diff --git a/bsp/lpc54608-LPCXpresso/drivers/drv_emac.c b/bsp/lpc54608-LPCXpresso/drivers/drv_emac.c index b432aea70e..394ad22cca 100644 --- a/bsp/lpc54608-LPCXpresso/drivers/drv_emac.c +++ b/bsp/lpc54608-LPCXpresso/drivers/drv_emac.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2018, RT-Thread Development Team + * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * @@ -73,14 +73,14 @@ struct lpc_emac /* inherit from ethernet device */ struct eth_device parent; struct rt_semaphore tx_wait; - + ENET_Type *base; enet_handle_t handle; - + /* interface address info. */ rt_uint8_t dev_addr[MAX_ADDR_LEN]; /* hw address */ uint32_t phyAddr; - + uint8_t RxBuffDescrip[ENET_RXBD_NUM * sizeof(enet_rx_bd_struct_t) + ENET_BUFF_ALIGNMENT]; uint8_t TxBuffDescrip[ENET_TXBD_NUM * sizeof(enet_tx_bd_struct_t) + ENET_BUFF_ALIGNMENT]; uint8_t RxDataBuff[ENET_RXBD_NUM * ENET_ALIGN(ENET_RXBUFF_SIZE) + ENET_BUFF_ALIGNMENT]; @@ -273,7 +273,7 @@ static rt_err_t lpc_emac_phy_init(phy_speed_t * speed, phy_duplex_t * duplex) { bool link = false; int32_t status; - + RT_ASSERT(speed != NULL); RT_ASSERT(duplex != NULL); @@ -284,9 +284,9 @@ static rt_err_t lpc_emac_phy_init(phy_speed_t * speed, phy_duplex_t * duplex) *duplex = kPHY_HalfDuplex; /* 10M speed. */ *speed = kPHY_Speed10M; - + eth_device_linkchange(&lpc_emac_device.parent, RT_FALSE); - + ETH_PRINTF("PHY_Init failed!\n"); return RT_ERROR; } @@ -305,7 +305,7 @@ static rt_err_t lpc_emac_phy_init(phy_speed_t * speed, phy_duplex_t * duplex) } PHY_GetLinkSpeedDuplex(lpc_emac_device.base, lpc_emac_device.phyAddr, speed, duplex); - + eth_device_linkchange(&lpc_emac_device.parent, RT_TRUE); return RT_EOK; @@ -338,19 +338,19 @@ static rt_err_t lpc_emac_init(rt_device_t dev) buffCfg.rxDescTailAddrAlign = get_rx_desc(ENET_RXBD_NUM); buffCfg.rxBufferStartAddr = rxBufferStartAddr; buffCfg.rxBuffSizeAlign = ENET_ALIGN(ENET_RXBUFF_SIZE); - + /* Get default configuration 100M RMII. */ ENET_GetDefaultConfig(&config); /* Use the actual speed and duplex when phy success to finish the autonegotiation. */ config.miiSpeed = (enet_mii_speed_t)speed; config.miiDuplex = (enet_mii_duplex_t)duplex; - + ETH_PRINTF("Auto negotiation, Speed: "); if (config.miiSpeed == kENET_MiiSpeed100M) ETH_PRINTF("100M"); else ETH_PRINTF("10M"); - + ETH_PRINTF(", Duplex: "); if (config.miiSpeed == kENET_MiiSpeed100M) ETH_PRINTF("Full\n"); @@ -363,10 +363,10 @@ static rt_err_t lpc_emac_init(rt_device_t dev) /* Enable the tx/rx interrupt. */ ENET_EnableInterrupts(lpc_emac_device.base, (kENET_DmaTx | kENET_DmaRx)); ENET_CreateHandler(lpc_emac_device.base, &lpc_emac_device.handle, &config, &buffCfg, ethernet_callback, NULL); - + /* Initialize Descriptor. */ ENET_DescriptorInit(lpc_emac_device.base, &config, &buffCfg); - + /* Active TX/RX. */ ENET_StartRxTx(lpc_emac_device.base, 1, 1); @@ -416,23 +416,23 @@ static rt_err_t lpc_emac_control(rt_device_t dev, int cmd, void *args) /* transmit packet. */ rt_err_t lpc_emac_tx(rt_device_t dev, struct pbuf *p) { - rt_err_t result = RT_EOK; - enet_handle_t * enet_handle = &lpc_emac_device.handle; + rt_err_t result = RT_EOK; + enet_handle_t * enet_handle = &lpc_emac_device.handle; ENET_Type *enet_base = lpc_emac_device.base; uint8_t * data; - - uint16_t len; - RT_ASSERT(p != NULL); + uint16_t len; + + RT_ASSERT(p != NULL); RT_ASSERT(enet_handle != RT_NULL); if (p->tot_len > ENET_TXBUFF_SIZE) { return RT_ERROR; } - + packet_dump("TX dump", p); - + /* get free tx buffer */ { rt_err_t result; @@ -442,18 +442,18 @@ rt_err_t lpc_emac_tx(rt_device_t dev, struct pbuf *p) return RT_ERROR; } } - - // fix RxDataBuff -> TxDataBuff, ENET_RXBUFF_SIZE -> ENET_TXBUFF_SIZE + + // fix RxDataBuff -> TxDataBuff, ENET_RXBUFF_SIZE -> ENET_TXBUFF_SIZE data = (uint8_t *)ENET_ALIGN(&lpc_emac_device.TxDataBuff[lpc_emac_device.txIdx * ENET_ALIGN(ENET_TXBUFF_SIZE)]); len = pbuf_copy_partial(p, data, p->tot_len, 0); lpc_emac_device.txIdx = (lpc_emac_device.txIdx + 1) / ENET_TXBD_NUM; - - // fix 'p->len' to 'len', avoid send wrong partial packet. + + // fix 'p->len' to 'len', avoid send wrong partial packet. result = ENET_SendFrame(enet_base, enet_handle, data, len); - + if ((result == kStatus_ENET_TxFrameFail) || (result == kStatus_ENET_TxFrameOverLen) || (result == kStatus_ENET_TxFrameBusy)) { - return RT_ERROR; + return RT_ERROR; } return RT_EOK; @@ -462,22 +462,22 @@ rt_err_t lpc_emac_tx(rt_device_t dev, struct pbuf *p) /* reception packet. */ struct pbuf *lpc_emac_rx(rt_device_t dev) { - uint32_t length = 0; - status_t status; - - struct pbuf* p = RT_NULL; - enet_handle_t * enet_handle = &lpc_emac_device.handle; + uint32_t length = 0; + status_t status; + + struct pbuf* p = RT_NULL; + enet_handle_t * enet_handle = &lpc_emac_device.handle; ENET_Type *enet_base = lpc_emac_device.base; - - /* Get the Frame size */ - status = ENET_GetRxFrameSize(enet_base, enet_handle, &length, 0); - /* Call ENET_ReadFrame when there is a received frame. */ - if (length != 0) - { - /* Received valid frame. Deliver the rx buffer with the size equal to length. */ - p = pbuf_alloc(PBUF_RAW, length, PBUF_POOL); - + /* Get the Frame size */ + status = ENET_GetRxFrameSize(enet_base, enet_handle, &length, 0); + + /* Call ENET_ReadFrame when there is a received frame. */ + if (length != 0) + { + /* Received valid frame. Deliver the rx buffer with the size equal to length. */ + p = pbuf_alloc(PBUF_RAW, length, PBUF_POOL); + if (p != NULL) { status = ENET_ReadFrame(enet_base, enet_handle, p->payload, length, 0); @@ -496,12 +496,12 @@ struct pbuf *lpc_emac_rx(rt_device_t dev) { ETH_PRINTF(" pbuf_alloc faild\n"); } - } - else if (status == kStatus_ENET_RxFrameError) - { - ETH_PRINTF("ENET_GetRxFrameSize: kStatus_ENET_RxFrameError\n"); - ENET_ReadFrame(enet_base, enet_handle, NULL, 0, 0); - } + } + else if (status == kStatus_ENET_RxFrameError) + { + ETH_PRINTF("ENET_GetRxFrameSize: kStatus_ENET_RxFrameError\n"); + ENET_ReadFrame(enet_base, enet_handle, NULL, 0, 0); + } return NULL; } @@ -510,11 +510,11 @@ int lpc_emac_hw_init(void) { /* init tx semaphore */ rt_sem_init(&lpc_emac_device.tx_wait, "tx_wait", ENET_TXBD_NUM, RT_IPC_FLAG_FIFO); - + lpc_emac_device.phyAddr = 0; lpc_emac_device.txIdx = 0; lpc_emac_device.base = ENET; - + // OUI 00-60-37 NXP Semiconductors lpc_emac_device.dev_addr[0] = 0x00; lpc_emac_device.dev_addr[1] = 0x60; @@ -536,7 +536,7 @@ int lpc_emac_hw_init(void) lpc_emac_device.parent.eth_tx = lpc_emac_tx; eth_device_init(&(lpc_emac_device.parent), "e0"); - + return 0; } INIT_DEVICE_EXPORT(lpc_emac_hw_init); @@ -546,7 +546,7 @@ int emac_stat(void) { rt_kprintf("enter rx isr coutner : %d\n", isr_rx_counter); rt_kprintf("enter tx isr coutner : %d\n", isr_tx_counter); - + return 0; } #endif @@ -556,14 +556,14 @@ void phy_dump(void) status_t PHY_Read(ENET_Type *base, uint32_t phyAddr, uint32_t phyReg, uint32_t *dataPtr); int i; - + for (i = 0; i < 31; i++) { status_t result = kStatus_Success; uint32_t reg; - + result = PHY_Read(lpc_emac_device.base, lpc_emac_device.phyAddr, i, ®); - + if (result == kStatus_Success) { rt_kprintf("%02d: %08d\n", i, reg); @@ -630,7 +630,7 @@ void emac_dump(void) DUMP_REG(DMA_SYSBUS_MODE); DUMP_REG(DMA_INTR_STAT); DUMP_REG(DMA_DBG_STAT); - + DUMP_REG(MTL_QUEUE[0].MTL_TXQX_OP_MODE); DUMP_REG(MTL_QUEUE[0].MTL_TXQX_UNDRFLW); DUMP_REG(MTL_QUEUE[0].MTL_TXQX_DBG); @@ -660,7 +660,7 @@ void emac_dump(void) DUMP_REG(MTL_QUEUE[1].MTL_RXQX_MISSPKT_OVRFLW_CNT); DUMP_REG(MTL_QUEUE[1].MTL_RXQX_DBG); DUMP_REG(MTL_QUEUE[1].MTL_RXQX_CTRL); - + DUMP_REG(DMA_CH[0].DMA_CHX_CTRL); DUMP_REG(DMA_CH[0].DMA_CHX_TX_CTRL); DUMP_REG(DMA_CH[0].DMA_CHX_RX_CTRL); @@ -678,7 +678,7 @@ void emac_dump(void) DUMP_REG(DMA_CH[0].DMA_CHX_CUR_HST_TXBUF); DUMP_REG(DMA_CH[0].DMA_CHX_CUR_HST_RXBUF); DUMP_REG(DMA_CH[0].DMA_CHX_STAT); - + DUMP_REG(DMA_CH[1].DMA_CHX_CTRL); DUMP_REG(DMA_CH[1].DMA_CHX_TX_CTRL); DUMP_REG(DMA_CH[1].DMA_CHX_RX_CTRL); @@ -701,23 +701,23 @@ void emac_dump(void) void emac_bd_dump(void) { int i; - + rt_kprintf("rx bd dump: \n"); for (i = 0; i < ENET_RXBD_NUM; i++) { enet_rx_bd_struct_t * rx_bd = get_rx_desc(i); - rt_kprintf("buf1: %p, buf2: %p, ctrl: %08x\n", - rx_bd->buff1Addr, + rt_kprintf("buf1: %p, buf2: %p, ctrl: %08x\n", + rx_bd->buff1Addr, rx_bd->buff2Addr, rx_bd->control); } - + rt_kprintf("tx bd dump: \n"); for (i = 0; i < ENET_TXBD_NUM; i++) { enet_tx_bd_struct_t * tx_bd = get_tx_desc(i); - rt_kprintf("buf1: %p, buf2: %p, len: %08x, ctrl: %08x\n", - tx_bd->buff1Addr, + rt_kprintf("buf1: %p, buf2: %p, len: %08x, ctrl: %08x\n", + tx_bd->buff1Addr, tx_bd->buff2Addr, tx_bd->buffLen, tx_bd->controlStat); diff --git a/bsp/lpc54608-LPCXpresso/drivers/drv_emac.h b/bsp/lpc54608-LPCXpresso/drivers/drv_emac.h index efaa0ac8e3..cde6d2742e 100644 --- a/bsp/lpc54608-LPCXpresso/drivers/drv_emac.h +++ b/bsp/lpc54608-LPCXpresso/drivers/drv_emac.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2018, RT-Thread Development Team + * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * diff --git a/bsp/lpc54608-LPCXpresso/drivers/drv_ft5406.c b/bsp/lpc54608-LPCXpresso/drivers/drv_ft5406.c index fd46a199c0..c87d2039f3 100644 --- a/bsp/lpc54608-LPCXpresso/drivers/drv_ft5406.c +++ b/bsp/lpc54608-LPCXpresso/drivers/drv_ft5406.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2018, RT-Thread Development Team + * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * @@ -7,7 +7,7 @@ * Date Author Notes * 2017-08-08 Yang the first version */ - + #include <rtthread.h> #include <rtdevice.h> #include <finsh.h> diff --git a/bsp/lpc54608-LPCXpresso/drivers/drv_i2c.c b/bsp/lpc54608-LPCXpresso/drivers/drv_i2c.c index 39e08af2d3..1a6b5ff3b8 100644 --- a/bsp/lpc54608-LPCXpresso/drivers/drv_i2c.c +++ b/bsp/lpc54608-LPCXpresso/drivers/drv_i2c.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2018, RT-Thread Development Team + * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * @@ -7,7 +7,7 @@ * Date Author Notes * 2017-08-08 Yang the first version */ - + #include <rtthread.h> #include <rtdevice.h> #include "board.h" diff --git a/bsp/lpc54608-LPCXpresso/drivers/drv_lcd.c b/bsp/lpc54608-LPCXpresso/drivers/drv_lcd.c index c1a6660819..260fb09f0e 100644 --- a/bsp/lpc54608-LPCXpresso/drivers/drv_lcd.c +++ b/bsp/lpc54608-LPCXpresso/drivers/drv_lcd.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2018, RT-Thread Development Team + * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * @@ -7,7 +7,7 @@ * Date Author Notes * 2017-08-08 Yang the first version */ - + #include <board.h> #include <rtdevice.h> #include <drv_lcd.h> @@ -427,7 +427,7 @@ void rt_hw_lcd_init(void) _rt_framebuffer = rt_malloc_align(sizeof(rt_uint16_t) * RT_HW_LCD_HEIGHT * RT_HW_LCD_WIDTH, 32); if (_rt_framebuffer == RT_NULL) return; /* no memory yet */ _lcd_info.bits_per_pixel = LCD_BITS_PER_PIXEL; - _lcd_info.pixel_format = RTGRAPHIC_PIXEL_FORMAT_RGB565; // RTGRAPHIC_PIXEL_FORMAT_ARGB888 + _lcd_info.pixel_format = RTGRAPHIC_PIXEL_FORMAT_RGB565; // RTGRAPHIC_PIXEL_FORMAT_ARGB888 _lcd_info.framebuffer = (void *)_rt_framebuffer; _lcd_info.width = RT_HW_LCD_WIDTH; _lcd_info.height = RT_HW_LCD_HEIGHT; diff --git a/bsp/lpc54608-LPCXpresso/drivers/drv_sd.c b/bsp/lpc54608-LPCXpresso/drivers/drv_sd.c index e1239b7899..f5efc2a9d7 100644 --- a/bsp/lpc54608-LPCXpresso/drivers/drv_sd.c +++ b/bsp/lpc54608-LPCXpresso/drivers/drv_sd.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2018, RT-Thread Development Team + * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * @@ -394,22 +394,22 @@ rt_err_t mci_hw_init(const char *device_name) rt_kprintf("SD_Init failed!\n"); return -RT_ERROR; } - - /* - follow the page: https://community.nxp.com/thread/454769 - - The issue concerns sdmmc library bug (I finally solved) in SD_Init() in the file sdmmc/src/fsl_sd.c:SD_SelectBusTiming() - calls SD_SwitchFunction() which sets block size to 64bytes (512bits).Therefore SD_SetBlockSize(card, FSL_SDMMC_DEFAULT_BLOCK_SIZE) - should be called again before SD_Init() exits. - */ - - if (kStatus_Success != SDMMC_SetBlockSize(_mci_device->card.host.base, _mci_device->card.host.transfer, FSL_SDMMC_DEFAULT_BLOCK_SIZE)) - { + + /* + follow the page: https://community.nxp.com/thread/454769 + + The issue concerns sdmmc library bug (I finally solved) in SD_Init() in the file sdmmc/src/fsl_sd.c:SD_SelectBusTiming() + calls SD_SwitchFunction() which sets block size to 64bytes (512bits).Therefore SD_SetBlockSize(card, FSL_SDMMC_DEFAULT_BLOCK_SIZE) + should be called again before SD_Init() exits. + */ + + if (kStatus_Success != SDMMC_SetBlockSize(_mci_device->card.host.base, _mci_device->card.host.transfer, FSL_SDMMC_DEFAULT_BLOCK_SIZE)) + { SD_Deinit(&_mci_device->card); memset(&_mci_device->card, 0U, sizeof(_mci_device->card)); rt_kprintf("SD_Init failed!\n"); - return -RT_ERROR; - } + return -RT_ERROR; + } /* initialize mutex lock */ rt_mutex_init(&_mci_device->lock, device_name, RT_IPC_FLAG_FIFO); diff --git a/bsp/lpc54608-LPCXpresso/drivers/drv_sd.h b/bsp/lpc54608-LPCXpresso/drivers/drv_sd.h index d36134eaa4..1fc53a7459 100644 --- a/bsp/lpc54608-LPCXpresso/drivers/drv_sd.h +++ b/bsp/lpc54608-LPCXpresso/drivers/drv_sd.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2018, RT-Thread Development Team + * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * @@ -50,7 +50,7 @@ struct mci_device { struct rt_device parent; /**< RT-Thread device struct */ struct rt_device_blk_geometry geometry; /**< sector size, sector count */ - sd_card_t card; /**< Card descriptor */ + sd_card_t card; /**< Card descriptor */ rt_event_t finish_event; /**< data send finish event*/ rt_bool_t data_error; /**< data send error*/ struct rt_mutex lock; diff --git a/bsp/lpc54608-LPCXpresso/drivers/drv_sdram.h b/bsp/lpc54608-LPCXpresso/drivers/drv_sdram.h index 4de79410b0..1d9a9db4aa 100644 --- a/bsp/lpc54608-LPCXpresso/drivers/drv_sdram.h +++ b/bsp/lpc54608-LPCXpresso/drivers/drv_sdram.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2018, RT-Thread Development Team + * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * diff --git a/bsp/lpc54608-LPCXpresso/drivers/drv_sram.c b/bsp/lpc54608-LPCXpresso/drivers/drv_sram.c index 81f4ba6e9c..4b27d23fa1 100644 --- a/bsp/lpc54608-LPCXpresso/drivers/drv_sram.c +++ b/bsp/lpc54608-LPCXpresso/drivers/drv_sram.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2018, RT-Thread Development Team + * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * diff --git a/bsp/lpc54608-LPCXpresso/drivers/drv_sram.h b/bsp/lpc54608-LPCXpresso/drivers/drv_sram.h index 14c87054ff..7abc19420f 100644 --- a/bsp/lpc54608-LPCXpresso/drivers/drv_sram.h +++ b/bsp/lpc54608-LPCXpresso/drivers/drv_sram.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2018, RT-Thread Development Team + * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * diff --git a/bsp/lpc54608-LPCXpresso/drivers/drv_uart.c b/bsp/lpc54608-LPCXpresso/drivers/drv_uart.c index 7c9bd9fc7f..ce9e48fdad 100644 --- a/bsp/lpc54608-LPCXpresso/drivers/drv_uart.c +++ b/bsp/lpc54608-LPCXpresso/drivers/drv_uart.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2018, RT-Thread Development Team + * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * @@ -146,7 +146,7 @@ void rt_hw_uart_init(void) struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT; #ifdef RT_USING_UART0 - + uart = &uart0; serial0.ops = &lpc_uart_ops; @@ -188,5 +188,5 @@ void rt_hw_uart_init(void) rt_hw_serial_register(&serial0, "uart0", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM, uart); -#endif +#endif } |