diff options
Diffstat (limited to 'bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sdio.h')
| -rw-r--r-- | bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sdio.h | 174 |
1 files changed, 174 insertions, 0 deletions
diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sdio.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sdio.h new file mode 100644 index 0000000000..d1610bee31 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sdio.h @@ -0,0 +1,174 @@ +#ifndef __SWM341_SDIO_H__ +#define __SWM341_SDIO_H__ + + +#define SD_CMD_GO_IDLE_STATE ((uint8_t)0) +#define SD_CMD_SEND_OP_COND ((uint8_t)1) +#define SD_CMD_ALL_SEND_CID ((uint8_t)2) +#define SD_CMD_SET_REL_ADDR ((uint8_t)3) +#define SD_CMD_SET_DSR ((uint8_t)4) +#define SD_CMD_HS_SWITCH ((uint8_t)6) +#define SD_CMD_SEL_DESEL_CARD ((uint8_t)7) +#define SD_CMD_SEND_IF_COND ((uint8_t)8) +#define SD_CMD_SEND_CSD ((uint8_t)9) +#define SD_CMD_SEND_CID ((uint8_t)10) +#define SD_CMD_STOP_TRANSMISSION ((uint8_t)12) +#define SD_CMD_SEND_STATUS ((uint8_t)13) +#define SD_CMD_SET_BLOCKLEN ((uint8_t)16) +#define SD_CMD_READ_SINGLE_BLOCK ((uint8_t)17) +#define SD_CMD_READ_MULT_BLOCK ((uint8_t)18) +#define SD_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24) +#define SD_CMD_WRITE_MULT_BLOCK ((uint8_t)25) +#define SD_CMD_PROG_CID ((uint8_t)26) +#define SD_CMD_PROG_CSD ((uint8_t)27) +#define SD_CMD_APP_CMD ((uint8_t)55) + +/*Following commands are SD Card Specific commands. + SDIO_APP_CMD should be sent before sending these commands. */ +#define SD_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) +#define SD_CMD_SD_APP_STAUS ((uint8_t)13) +#define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) +#define SD_CMD_SD_APP_OP_COND ((uint8_t)41) +#define SD_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) +#define SD_CMD_SD_APP_SEND_SCR ((uint8_t)51) +#define SD_CMD_SDIO_RW_DIRECT ((uint8_t)52) +#define SD_CMD_SDIO_RW_EXTENDED ((uint8_t)53) + +#define SD_CMD53_ARG_Count 0 // 0x001 1 0x002 2 ... 0x1FF 512 0x000 512 byte +#define SD_CMD53_ARG_Addr 9 // Start Address of I/O register to read or write +#define SD_CMD53_ARG_AddrInc 26 // 0 Multi byte R/W to fixed address 1 Multi byte R/W to incrementing address +#define SD_CMD53_ARG_CountUnit 27 // 0 Count in byte 1 Count in block +#define SD_CMD53_ARG_Function 28 // The number of the function within the I/O card you wish to read or write. Function 0x00 selects the common I/O area (CIA). +#define SD_CMD53_ARG_nRW 31 // 0 for read 1 for write + + +#define SD_RESP_NO 0 //0 无响应 +#define SD_RESP_32b 2 //2 32位响应 +#define SD_RESP_128b 1 //1 128位响应 +#define SD_RESP_32b_busy 3 //3 32位响应,check Busy after response + +#define SD_BUSWIDTH_1b 0 +#define SD_BUSWIDTH_4b 2 + +#define SD_RES_OK 0 +#define SD_RES_ERR 1 +#define SD_RES_TIMEOUT 2 + + +/* Card Status return by response R1 */ +#define SD_CS_APP_CMD (1 << 5) // The card will expect ACMD +#define SD_CS_READY_FOR_DATA (1 << 8) // Corresponds to buffer empty signaling on the bus +#define SD_CS_CURRENT_STATE (1 << 9) // The state of the card when receiving the command. 共 4 位 +#define SD_CS_CARD_ECC_FAILED (1 << 21) +#define SD_CS_ILLEGAL_COMMAND (1 << 22) +#define SD_CS_CARD_IS_LOCKED (1 << 25) + + +typedef struct +{ + __IO uint8_t CSDStruct; // CSD structure + __IO uint8_t SysSpecVersion; // System specification version + __IO uint8_t Reserved1; // Reserved + __IO uint8_t TAAC; // Data read access-time 1 + __IO uint8_t NSAC; // Data read access-time 2 in CLK cycles + __IO uint8_t MaxBusClkFrec; // Max. bus clock frequency + __IO uint16_t CardComdClasses; //< Card command classes + __IO uint8_t RdBlockLen; // Max. read data block length + __IO uint8_t PartBlockRead; // Partial blocks for read allowed + __IO uint8_t WrBlockMisalign; // Write block misalignment + __IO uint8_t RdBlockMisalign; // Read block misalignment + __IO uint8_t DSRImpl; // DSR implemented + __IO uint8_t Reserved2; // Reserved + __IO uint32_t DeviceSize; // Device Size + __IO uint8_t MaxRdCurrentVDDMin; // Max. read current @ VDD min + __IO uint8_t MaxRdCurrentVDDMax; // Max. read current @ VDD max + __IO uint8_t MaxWrCurrentVDDMin; // Max. write current @ VDD min + __IO uint8_t MaxWrCurrentVDDMax; // Max. write current @ VDD max + __IO uint8_t DeviceSizeMul; // Device size multiplier + __IO uint8_t EraseGrSize; // Erase group size + __IO uint8_t EraseGrMul; // Erase group size multiplier + __IO uint8_t WrProtectGrSize; // Write protect group size + __IO uint8_t WrProtectGrEnable; // Write protect group enable + __IO uint8_t ManDeflECC; // Manufacturer default ECC + __IO uint8_t WrSpeedFact; // Write speed factor + __IO uint8_t MaxWrBlockLen; // Max. write data block length + __IO uint8_t WriteBlockPaPartial; // Partial blocks for write allowed + __IO uint8_t Reserved3; // Reserded + __IO uint8_t ContentProtectAppli; // Content protection application + __IO uint8_t FileFormatGrouop; // File format group + __IO uint8_t CopyFlag; // Copy flag (OTP) + __IO uint8_t PermWrProtect; // Permanent write protection + __IO uint8_t TempWrProtect; // Temporary write protection + __IO uint8_t FileFormat; // File Format + __IO uint8_t ECC; // ECC code +} SD_CSD; + +typedef struct +{ + __IO uint8_t ManufacturerID; // ManufacturerID + __IO uint16_t OEM_AppliID; // OEM/Application ID + __IO uint32_t ProdName1; // Product Name part1 + __IO uint8_t ProdName2; // Product Name part2 + __IO uint8_t ProdRev; // Product Revision + __IO uint32_t ProdSN; // Product Serial Number + __IO uint8_t Reserved1; // Reserved1 + __IO uint16_t ManufactDate; // Manufacturing Date +} SD_CID; + + +#define SDIO_STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x00000000) +#define SDIO_STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x00000001) +#define SDIO_HIGH_CAPACITY_SD_CARD ((uint32_t)0x00000002) +#define SDIO_MULTIMEDIA_CARD ((uint32_t)0x00000003) +#define SDIO_SECURE_DIGITAL_IO_CARD ((uint32_t)0x00000004) +#define SDIO_HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x00000005) +#define SDIO_SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x00000006) +#define SDIO_HIGH_CAPACITY_MMC_CARD ((uint32_t)0x00000007) + + +typedef struct +{ + SD_CSD SD_csd; + SD_CID SD_cid; + uint64_t CardCapacity; // Card Capacity + uint32_t CardBlockSize; // Card Block Size + uint16_t RCA; + uint8_t CardType; +} SD_CardInfo; + + +extern SD_CardInfo SD_cardInfo; + +uint32_t SDIO_Init(uint32_t freq); +uint32_t SDIO_BlockWrite(uint32_t block_addr, uint32_t buff[]); +uint32_t SDIO_BlockRead(uint32_t block_addr, uint32_t buff[]); + +uint32_t SDIO_MultiBlockWrite(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[]); +uint32_t SDIO_MultiBlockRead(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[]); + +uint32_t SDIO_DMABlockWrite(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[]); +uint32_t SDIO_DMABlockRead(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[]); + +uint32_t _SDIO_SendCmd(uint32_t cmd, uint32_t arg, uint32_t resp_type, uint32_t *resp_data, uint32_t have_data, uint32_t data_read, uint16_t block_cnt, uint32_t use_dma); + +#define SDIO_SendCmd(cmd, arg, resp_type, resp_data) _SDIO_SendCmd(cmd, arg, resp_type, resp_data, 0, 0, 0, 0) +#define SDIO_SendCmdWithData(cmd, arg, resp_type, resp_data, data_read, block_cnt) _SDIO_SendCmd(cmd, arg, resp_type, resp_data, 1, data_read, block_cnt, 0) +#define SDIO_SendCmdWithDataByDMA(cmd, arg, resp_type, resp_data, data_read, block_cnt) _SDIO_SendCmd(cmd, arg, resp_type, resp_data, 1, data_read, block_cnt, 1) + +void parseCID(uint32_t CID_Tab[4]); +void parseCSD(uint32_t CID_Tab[4]); + +uint32_t calcSDCLKDiv(uint32_t freq_sel); + + +enum SDIO_bus_width { SDIO_1bit = 0, SDIO_4bit = 1 }; + +uint32_t SDIO_IO_Init(uint32_t freq, enum SDIO_bus_width w); +uint32_t SDIO_IO_ByteWrite(uint8_t func, uint32_t addr, uint8_t data); +uint32_t SDIO_IO_ByteRead(uint8_t func, uint32_t addr, uint8_t * data); +uint32_t SDIO_IO_BlockWrite(uint8_t func, uint32_t addr, uint8_t addrInc, uint32_t buff[], uint16_t block_size); +uint32_t SDIO_IO_BlockRead(uint8_t func, uint32_t addr, uint8_t addrInc, uint32_t buff[], uint16_t block_size); +uint32_t SDIO_IO_MultiBlockWrite(uint8_t func, uint32_t addr, uint8_t addrInc, uint32_t buff[], uint16_t block_count); +uint32_t SDIO_IO_MultiBlockRead(uint8_t func, uint32_t addr, uint8_t addrInc, uint32_t buff[], uint16_t block_count); + +#endif //__SWM341_SDIO_H__ |
