diff options
Diffstat (limited to 'components/drivers/include')
| -rw-r--r-- | components/drivers/include/drivers/i2c.h | 4 | ||||
| -rw-r--r-- | components/drivers/include/drivers/i2c_dev.h | 2 | ||||
| -rw-r--r-- | components/drivers/include/drivers/mmcsd_core.h | 1 | ||||
| -rw-r--r-- | components/drivers/include/drivers/pin.h | 7 | ||||
| -rw-r--r-- | components/drivers/include/drivers/rtc.h | 36 | ||||
| -rw-r--r-- | components/drivers/include/drivers/sensor.h | 239 | ||||
| -rw-r--r-- | components/drivers/include/drivers/serial_v2.h | 185 | ||||
| -rw-r--r-- | components/drivers/include/drivers/usb_common.h | 4 | ||||
| -rw-r--r-- | components/drivers/include/drivers/usb_device.h | 7 | ||||
| -rw-r--r-- | components/drivers/include/ipc/workqueue.h | 15 | ||||
| -rw-r--r-- | components/drivers/include/rtdevice.h | 44 |
11 files changed, 504 insertions, 40 deletions
diff --git a/components/drivers/include/drivers/i2c.h b/components/drivers/include/drivers/i2c.h index 50ce021d53..7bf99d26cc 100644 --- a/components/drivers/include/drivers/i2c.h +++ b/components/drivers/include/drivers/i2c.h @@ -6,6 +6,7 @@ * Change Logs: * Date Author Notes * 2012-04-25 weety first version + * 2021-04-20 RiceChen added support for bus control api */ #ifndef __I2C_H__ @@ -74,6 +75,9 @@ struct rt_i2c_bus_device *rt_i2c_bus_device_find(const char *bus_name); rt_size_t rt_i2c_transfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg msgs[], rt_uint32_t num); +rt_err_t rt_i2c_control(struct rt_i2c_bus_device *bus, + rt_uint32_t cmd, + rt_uint32_t arg); rt_size_t rt_i2c_master_send(struct rt_i2c_bus_device *bus, rt_uint16_t addr, rt_uint16_t flags, diff --git a/components/drivers/include/drivers/i2c_dev.h b/components/drivers/include/drivers/i2c_dev.h index 94f110c055..080ff26f87 100644 --- a/components/drivers/include/drivers/i2c_dev.h +++ b/components/drivers/include/drivers/i2c_dev.h @@ -6,6 +6,7 @@ * Change Logs: * Date Author Notes * 2012-04-25 weety first version + * 2021-04-20 RiceChen added bus clock command */ #ifndef __I2C_DEV_H__ @@ -21,6 +22,7 @@ extern "C" { #define RT_I2C_DEV_CTRL_ADDR 0x21 #define RT_I2C_DEV_CTRL_TIMEOUT 0x22 #define RT_I2C_DEV_CTRL_RW 0x23 +#define RT_I2C_DEV_CTRL_CLK 0x24 struct rt_i2c_priv_data { diff --git a/components/drivers/include/drivers/mmcsd_core.h b/components/drivers/include/drivers/mmcsd_core.h index 11b1386b23..51263d35f2 100644 --- a/components/drivers/include/drivers/mmcsd_core.h +++ b/components/drivers/include/drivers/mmcsd_core.h @@ -234,7 +234,6 @@ struct rt_mmcsd_host *mmcsd_alloc_host(void); void mmcsd_free_host(struct rt_mmcsd_host *host); int rt_mmcsd_core_init(void); -int rt_mmcsd_blk_init(void); rt_int32_t rt_mmcsd_blk_probe(struct rt_mmcsd_card *card); void rt_mmcsd_blk_remove(struct rt_mmcsd_card *card); diff --git a/components/drivers/include/drivers/pin.h b/components/drivers/include/drivers/pin.h index 5ba1e6c8ea..38e5abea2a 100644 --- a/components/drivers/include/drivers/pin.h +++ b/components/drivers/include/drivers/pin.h @@ -13,7 +13,6 @@ #define PIN_H__ #include <rtthread.h> -#include <rtdevice.h> #ifdef __cplusplus extern "C" { @@ -68,8 +67,6 @@ struct rt_pin_ops void (*pin_mode)(struct rt_device *device, rt_base_t pin, rt_base_t mode); void (*pin_write)(struct rt_device *device, rt_base_t pin, rt_base_t value); int (*pin_read)(struct rt_device *device, rt_base_t pin); - - /* TODO: add GPIO interrupt */ rt_err_t (*pin_attach_irq)(struct rt_device *device, rt_int32_t pin, rt_uint32_t mode, void (*hdr)(void *args), void *args); rt_err_t (*pin_detach_irq)(struct rt_device *device, rt_int32_t pin); @@ -79,8 +76,6 @@ struct rt_pin_ops int rt_device_pin_register(const char *name, const struct rt_pin_ops *ops, void *user_data); -/* Get pin number by name,such as PA.0,P0.12 */ -rt_base_t rt_pin_get(const char *name); void rt_pin_mode(rt_base_t pin, rt_base_t mode); void rt_pin_write(rt_base_t pin, rt_base_t value); int rt_pin_read(rt_base_t pin); @@ -88,6 +83,8 @@ rt_err_t rt_pin_attach_irq(rt_int32_t pin, rt_uint32_t mode, void (*hdr)(void *args), void *args); rt_err_t rt_pin_detach_irq(rt_int32_t pin); rt_err_t rt_pin_irq_enable(rt_base_t pin, rt_uint32_t enabled); +/* Get pin number by name,such as PA.0,P0.12 */ +rt_base_t rt_pin_get(const char *name); #ifdef __cplusplus } diff --git a/components/drivers/include/drivers/rtc.h b/components/drivers/include/drivers/rtc.h index 4845937113..0bafbad7ad 100644 --- a/components/drivers/include/drivers/rtc.h +++ b/components/drivers/include/drivers/rtc.h @@ -6,15 +6,45 @@ * Change Logs: * Date Author Notes * 2012-10-10 aozima first version. + * 2021-06-11 iysheng implement RTC framework V2.0 + * 2021-07-30 Meco Man move rtc_core.h to rtc.h */ #ifndef __RTC_H__ #define __RTC_H__ +#include <rtdef.h> + +#define RT_DEVICE_CTRL_RTC_GET_TIME 0x10 /**< get second time */ +#define RT_DEVICE_CTRL_RTC_SET_TIME 0x11 /**< set second time */ +#define RT_DEVICE_CTRL_RTC_GET_TIME_US 0x12 /**< get microsecond time */ +#define RT_DEVICE_CTRL_RTC_SET_TIME_US 0x13 /**< set microsecond time */ +#define RT_DEVICE_CTRL_RTC_GET_ALARM 0x14 /**< get alarm */ +#define RT_DEVICE_CTRL_RTC_SET_ALARM 0x15 /**< set alarm */ + +struct rt_rtc_ops +{ + rt_err_t (*init)(void); + rt_err_t (*get_secs)(void *arg); + rt_err_t (*set_secs)(void *arg); + rt_err_t (*get_alarm)(void *arg); + rt_err_t (*set_alarm)(void *arg); + rt_err_t (*get_usecs)(void *arg); + rt_err_t (*set_usecs)(void *arg); +}; + +typedef struct rt_rtc_device +{ + struct rt_device parent; + const struct rt_rtc_ops *ops; +} rt_rtc_dev_t; + +rt_err_t rt_hw_rtc_register(rt_rtc_dev_t *rtc, + const char *name, + rt_uint32_t flag, + void *data); + rt_err_t set_date(rt_uint32_t year, rt_uint32_t month, rt_uint32_t day); rt_err_t set_time(rt_uint32_t hour, rt_uint32_t minute, rt_uint32_t second); -int rt_soft_rtc_init(void); -int rt_rtc_ntp_sync_init(void); - #endif /* __RTC_H__ */ diff --git a/components/drivers/include/drivers/sensor.h b/components/drivers/include/drivers/sensor.h new file mode 100644 index 0000000000..ede8d11c99 --- /dev/null +++ b/components/drivers/include/drivers/sensor.h @@ -0,0 +1,239 @@ +/* + * Copyright (c) 2006-2021, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2019-01-31 flybreak first version + */ + +#ifndef __SENSOR_H__ +#define __SENSOR_H__ + +#include <rtthread.h> +#include "pin.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef RT_USING_RTC +#define rt_sensor_get_ts() time(RT_NULL) /* API for the sensor to get the timestamp */ +#else +#define rt_sensor_get_ts() rt_tick_get() /* API for the sensor to get the timestamp */ +#endif + +#define RT_PIN_NONE 0xFFFF /* RT PIN NONE */ +#define RT_DEVICE_FLAG_FIFO_RX 0x200 /* Flag to use when the sensor is open by fifo mode */ + +#define RT_SENSOR_MODULE_MAX (3) /* The maximum number of members of a sensor module */ + +/* Sensor types */ + +#define RT_SENSOR_CLASS_NONE (0) +#define RT_SENSOR_CLASS_ACCE (1) /* Accelerometer */ +#define RT_SENSOR_CLASS_GYRO (2) /* Gyroscope */ +#define RT_SENSOR_CLASS_MAG (3) /* Magnetometer */ +#define RT_SENSOR_CLASS_TEMP (4) /* Temperature */ +#define RT_SENSOR_CLASS_HUMI (5) /* Relative Humidity */ +#define RT_SENSOR_CLASS_BARO (6) /* Barometer */ +#define RT_SENSOR_CLASS_LIGHT (7) /* Ambient light */ +#define RT_SENSOR_CLASS_PROXIMITY (8) /* Proximity */ +#define RT_SENSOR_CLASS_HR (9) /* Heart Rate */ +#define RT_SENSOR_CLASS_TVOC (10) /* TVOC Level */ +#define RT_SENSOR_CLASS_NOISE (11) /* Noise Loudness */ +#define RT_SENSOR_CLASS_STEP (12) /* Step sensor */ +#define RT_SENSOR_CLASS_FORCE (13) /* Force sensor */ +#define RT_SENSOR_CLASS_DUST (14) /* Dust sensor */ +#define RT_SENSOR_CLASS_ECO2 (15) /* eCO2 sensor */ +#define RT_SENSOR_CLASS_GNSS (16) /* GPS/GNSS sensor */ +#define RT_SENSOR_CLASS_TOF (17) /* TOF sensor */ +#define RT_SENSOR_CLASS_SPO2 (18) /* SpO2 sensor */ + +/* Sensor vendor types */ + +#define RT_SENSOR_VENDOR_UNKNOWN (0) +#define RT_SENSOR_VENDOR_STM (1) /* STMicroelectronics */ +#define RT_SENSOR_VENDOR_BOSCH (2) /* Bosch */ +#define RT_SENSOR_VENDOR_INVENSENSE (3) /* Invensense */ +#define RT_SENSOR_VENDOR_SEMTECH (4) /* Semtech */ +#define RT_SENSOR_VENDOR_GOERTEK (5) /* Goertek */ +#define RT_SENSOR_VENDOR_MIRAMEMS (6) /* MiraMEMS */ +#define RT_SENSOR_VENDOR_DALLAS (7) /* Dallas */ +#define RT_SENSOR_VENDOR_ASAIR (8) /* Aosong */ +#define RT_SENSOR_VENDOR_SHARP (9) /* Sharp */ +#define RT_SENSOR_VENDOR_SENSIRION (10) /* Sensirion */ +#define RT_SENSOR_VENDOR_TI (11) /* Texas Instruments */ +#define RT_SENSOR_VENDOR_PLANTOWER (12) /* Plantower */ +#define RT_SENSOR_VENDOR_AMS (13) /* ams AG */ +#define RT_SENSOR_VENDOR_MAXIM (14) /* Maxim Integrated */ + + +/* Sensor unit types */ + +#define RT_SENSOR_UNIT_NONE (0) +#define RT_SENSOR_UNIT_MG (1) /* Accelerometer unit: mG */ +#define RT_SENSOR_UNIT_MDPS (2) /* Gyroscope unit: mdps */ +#define RT_SENSOR_UNIT_MGAUSS (3) /* Magnetometer unit: mGauss */ +#define RT_SENSOR_UNIT_LUX (4) /* Ambient light unit: lux */ +#define RT_SENSOR_UNIT_CM (5) /* Distance unit: cm */ +#define RT_SENSOR_UNIT_PA (6) /* Barometer unit: pa */ +#define RT_SENSOR_UNIT_PERMILLAGE (7) /* Relative Humidity unit: permillage */ +#define RT_SENSOR_UNIT_DCELSIUS (8) /* Temperature unit: dCelsius */ +#define RT_SENSOR_UNIT_HZ (9) /* Frequency unit: HZ */ +#define RT_SENSOR_UNIT_ONE (10) /* Dimensionless quantity unit: 1 */ +#define RT_SENSOR_UNIT_BPM (11) /* Heart rate unit: bpm */ +#define RT_SENSOR_UNIT_MM (12) /* Distance unit: mm */ +#define RT_SENSOR_UNIT_MN (13) /* Force unit: mN */ +#define RT_SENSOR_UNIT_PPM (14) /* Concentration unit: ppm */ +#define RT_SENSOR_UNIT_PPB (15) /* Concentration unit: ppb */ +#define RT_SENSOR_UNIT_DMS (16) /* Coordinates unit: DMS */ +#define RT_SENSOR_UNIT_DD (17) /* Coordinates unit: DD */ +/* Sensor communication interface types */ + +#define RT_SENSOR_INTF_I2C (1 << 0) +#define RT_SENSOR_INTF_SPI (1 << 1) +#define RT_SENSOR_INTF_UART (1 << 2) +#define RT_SENSOR_INTF_ONEWIRE (1 << 3) + +/* Sensor power mode types */ + +#define RT_SENSOR_POWER_NONE (0) +#define RT_SENSOR_POWER_DOWN (1) /* power down mode */ +#define RT_SENSOR_POWER_NORMAL (2) /* normal-power mode */ +#define RT_SENSOR_POWER_LOW (3) /* low-power mode */ +#define RT_SENSOR_POWER_HIGH (4) /* high-power mode */ + +/* Sensor work mode types */ + +#define RT_SENSOR_MODE_NONE (0) +#define RT_SENSOR_MODE_POLLING (1) /* One shot only read a data */ +#define RT_SENSOR_MODE_INT (2) /* TODO: One shot interrupt only read a data */ +#define RT_SENSOR_MODE_FIFO (3) /* TODO: One shot interrupt read all fifo data */ + +/* Sensor control cmd types */ + +#define RT_SENSOR_CTRL_GET_ID (0) /* Get device id */ +#define RT_SENSOR_CTRL_GET_INFO (1) /* Get sensor info */ +#define RT_SENSOR_CTRL_SET_RANGE (2) /* Set the measure range of sensor. unit is info of sensor */ +#define RT_SENSOR_CTRL_SET_ODR (3) /* Set output date rate. unit is HZ */ +#define RT_SENSOR_CTRL_SET_MODE (4) /* Set sensor's work mode. ex. RT_SENSOR_MODE_POLLING,RT_SENSOR_MODE_INT */ +#define RT_SENSOR_CTRL_SET_POWER (5) /* Set power mode. args type of sensor power mode. ex. RT_SENSOR_POWER_DOWN,RT_SENSOR_POWER_NORMAL */ +#define RT_SENSOR_CTRL_SELF_TEST (6) /* Take a self test */ + +#define RT_SENSOR_CTRL_USER_CMD_START 0x100 /* User commands should be greater than 0x100 */ + +struct rt_sensor_info +{ + rt_uint8_t type; /* The sensor type */ + rt_uint8_t vendor; /* Vendor of sensors */ + const char *model; /* model name of sensor */ + rt_uint8_t unit; /* unit of measurement */ + rt_uint8_t intf_type; /* Communication interface type */ + rt_int32_t range_max; /* maximum range of this sensor's value. unit is 'unit' */ + rt_int32_t range_min; /* minimum range of this sensor's value. unit is 'unit' */ + rt_uint32_t period_min; /* Minimum measurement period,unit:ms. zero = not a constant rate */ + rt_uint8_t fifo_max; +}; + +struct rt_sensor_intf +{ + char *dev_name; /* The name of the communication device */ + rt_uint8_t type; /* Communication interface type */ + void *user_data; /* Private data for the sensor. ex. i2c addr,spi cs,control I/O */ +}; + +struct rt_sensor_config +{ + struct rt_sensor_intf intf; /* sensor interface config */ + struct rt_device_pin_mode irq_pin; /* Interrupt pin, The purpose of this pin is to notification read data */ + rt_uint8_t mode; /* sensor work mode */ + rt_uint8_t power; /* sensor power mode */ + rt_uint16_t odr; /* sensor out data rate */ + rt_int32_t range; /* sensor range of measurement */ +}; + +typedef struct rt_sensor_device *rt_sensor_t; + +struct rt_sensor_device +{ + struct rt_device parent; /* The standard device */ + + struct rt_sensor_info info; /* The sensor info data */ + struct rt_sensor_config config; /* The sensor config data */ + + void *data_buf; /* The buf of the data received */ + rt_size_t data_len; /* The size of the data received */ + + const struct rt_sensor_ops *ops; /* The sensor ops */ + + struct rt_sensor_module *module; /* The sensor module */ + + rt_err_t (*irq_handle)(rt_sensor_t sensor); /* Called when an interrupt is generated, registered by the driver */ +}; + +struct rt_sensor_module +{ + rt_mutex_t lock; /* The module lock */ + + rt_sensor_t sen[RT_SENSOR_MODULE_MAX]; /* The module contains a list of sensors */ + rt_uint8_t sen_num; /* Number of sensors contained in the module */ +}; + +/* 3-axis Data Type */ +struct sensor_3_axis +{ + rt_int32_t x; + rt_int32_t y; + rt_int32_t z; +}; + +struct coordinates +{ + double longitude; + double latitude; +}; + +struct rt_sensor_data +{ + rt_uint32_t timestamp; /* The timestamp when the data was received */ + rt_uint8_t type; /* The sensor type of the data */ + union + { + struct sensor_3_axis acce; /* Accelerometer. unit: mG */ + struct sensor_3_axis gyro; /* Gyroscope. unit: mdps */ + struct sensor_3_axis mag; /* Magnetometer. unit: mGauss */ + struct coordinates coord; /* Coordinates unit: degrees */ + rt_int32_t temp; /* Temperature. unit: dCelsius */ + rt_int32_t humi; /* Relative humidity. unit: permillage */ + rt_int32_t baro; /* Pressure. unit: pascal (Pa) */ + rt_int32_t light; /* Light. unit: lux */ + rt_int32_t proximity; /* Distance. unit: centimeters */ + rt_int32_t hr; /* Heart rate. unit: bpm */ + rt_int32_t tvoc; /* TVOC. unit: permillage */ + rt_int32_t noise; /* Noise Loudness. unit: HZ */ + rt_uint32_t step; /* Step sensor. unit: 1 */ + rt_int32_t force; /* Force sensor. unit: mN */ + rt_uint32_t dust; /* Dust sensor. unit: ug/m3 */ + rt_uint32_t eco2; /* eCO2 sensor. unit: ppm */ + rt_uint32_t spo2; /* SpO2 sensor. unit: permillage */ + } data; +}; + +struct rt_sensor_ops +{ + rt_size_t (*fetch_data)(struct rt_sensor_device *sensor, void *buf, rt_size_t len); + rt_err_t (*control)(struct rt_sensor_device *sensor, int cmd, void *arg); +}; + +int rt_hw_sensor_register(rt_sensor_t sensor, + const char *name, + rt_uint32_t flag, + void *data); + +#ifdef __cplusplus +} +#endif + +#endif /* __SENSOR_H__ */ diff --git a/components/drivers/include/drivers/serial_v2.h b/components/drivers/include/drivers/serial_v2.h new file mode 100644 index 0000000000..3ba46bdcdd --- /dev/null +++ b/components/drivers/include/drivers/serial_v2.h @@ -0,0 +1,185 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2021-06-01 KyleChan first version + */ + +#ifndef __SERIAL_V2_H__ +#define __SERIAL_V2_H__ + +#include <rtthread.h> + +#define BAUD_RATE_2400 2400 +#define BAUD_RATE_4800 4800 +#define BAUD_RATE_9600 9600 +#define BAUD_RATE_19200 19200 +#define BAUD_RATE_38400 38400 +#define BAUD_RATE_57600 57600 +#define BAUD_RATE_115200 115200 +#define BAUD_RATE_230400 230400 +#define BAUD_RATE_460800 460800 +#define BAUD_RATE_921600 921600 +#define BAUD_RATE_2000000 2000000 +#define BAUD_RATE_3000000 3000000 + +#define DATA_BITS_5 5 +#define DATA_BITS_6 6 +#define DATA_BITS_7 7 +#define DATA_BITS_8 8 +#define DATA_BITS_9 9 + +#define STOP_BITS_1 0 +#define STOP_BITS_2 1 +#define STOP_BITS_3 2 +#define STOP_BITS_4 3 + +#ifdef _WIN32 +#include <windows.h> +#else +#define PARITY_NONE 0 +#define PARITY_ODD 1 +#define PARITY_EVEN 2 +#endif + +#define BIT_ORDER_LSB 0 +#define BIT_ORDER_MSB 1 + +#define NRZ_NORMAL 0 /* Non Return to Zero : normal mode */ +#define NRZ_INVERTED 1 /* Non Return to Zero : inverted mode */ + +#define RT_DEVICE_FLAG_RX_BLOCKING 0x1000 +#define RT_DEVICE_FLAG_RX_NON_BLOCKING 0x2000 + +#define RT_DEVICE_FLAG_TX_BLOCKING 0x4000 +#define RT_DEVICE_FLAG_TX_NON_BLOCKING 0x8000 + +#define RT_SERIAL_RX_BLOCKING RT_DEVICE_FLAG_RX_BLOCKING +#define RT_SERIAL_RX_NON_BLOCKING RT_DEVICE_FLAG_RX_NON_BLOCKING +#define RT_SERIAL_TX_BLOCKING RT_DEVICE_FLAG_TX_BLOCKING +#define RT_SERIAL_TX_NON_BLOCKING RT_DEVICE_FLAG_TX_NON_BLOCKING + +#define RT_DEVICE_CHECK_OPTMODE 0x20 + +#define RT_SERIAL_EVENT_RX_IND 0x01 /* Rx indication */ +#define RT_SERIAL_EVENT_TX_DONE 0x02 /* Tx complete */ +#define RT_SERIAL_EVENT_RX_DMADONE 0x03 /* Rx DMA transfer done */ +#define RT_SERIAL_EVENT_TX_DMADONE 0x04 /* Tx DMA transfer done */ +#define RT_SERIAL_EVENT_RX_TIMEOUT 0x05 /* Rx timeout */ + +#define RT_SERIAL_ERR_OVERRUN 0x01 +#define RT_SERIAL_ERR_FRAMING 0x02 +#define RT_SERIAL_ERR_PARITY 0x03 + +#define RT_SERIAL_TX_DATAQUEUE_SIZE 2048 +#define RT_SERIAL_TX_DATAQUEUE_LWM 30 + +#define RT_SERIAL_RX_MINBUFSZ 64 +#define RT_SERIAL_TX_MINBUFSZ 64 + +#define RT_SERIAL_TX_BLOCKING_BUFFER 1 +#define RT_SERIAL_TX_BLOCKING_NO_BUFFER 0 + +/* Default config for serial_configure structure */ +#define RT_SERIAL_CONFIG_DEFAULT \ +{ \ + BAUD_RATE_115200, /* 115200 bits/s */ \ + DATA_BITS_8, /* 8 databits */ \ + STOP_BITS_1, /* 1 stopbit */ \ + PARITY_NONE, /* No parity */ \ + BIT_ORDER_LSB, /* LSB first sent */ \ + NRZ_NORMAL, /* Normal mode */ \ + RT_SERIAL_RX_MINBUFSZ, /* rxBuf size */ \ + RT_SERIAL_TX_MINBUFSZ, /* txBuf size */ \ + 0 \ +} + +struct serial_configure +{ + rt_uint32_t baud_rate; + + rt_uint32_t data_bits :4; + rt_uint32_t stop_bits :2; + rt_uint32_t parity :2; + rt_uint32_t bit_order :1; + rt_uint32_t invert :1; + rt_uint32_t rx_bufsz :16; + rt_uint32_t tx_bufsz :16; + rt_uint32_t reserved :6; +}; + +/* + * Serial Receive FIFO mode + */ +struct rt_serial_rx_fifo +{ + struct rt_ringbuffer rb; + + struct rt_completion rx_cpt; + + rt_uint16_t rx_cpt_index; + + /* software fifo */ + rt_uint8_t buffer[]; +}; + +/* + * Serial Transmit FIFO mode + */ +struct rt_serial_tx_fifo +{ + struct rt_ringbuffer rb; + + rt_size_t put_size; + + rt_bool_t activated; + + struct rt_completion tx_cpt; + + /* software fifo */ + rt_uint8_t buffer[]; +}; + +struct rt_serial_device +{ + struct rt_device parent; + + const struct rt_uart_ops *ops; + struct serial_configure config; + + void *serial_rx; + void *serial_tx; +}; + +/** + * uart operators + */ +struct rt_uart_ops +{ + rt_err_t (*configure)(struct rt_serial_device *serial, + struct serial_configure *cfg); + + rt_err_t (*control)(struct rt_serial_device *serial, + int cmd, + void *arg); + + int (*putc)(struct rt_serial_device *serial, char c); + int (*getc)(struct rt_serial_device *serial); + + rt_size_t (*transmit)(struct rt_serial_device *serial, + rt_uint8_t *buf, + rt_size_t size, + rt_uint32_t tx_flag); +}; + +void rt_hw_serial_isr(struct rt_serial_device *serial, int event); + +rt_err_t rt_hw_serial_register(struct rt_serial_device *serial, + const char *name, + rt_uint32_t flag, + void *data); + +#endif diff --git a/components/drivers/include/drivers/usb_common.h b/components/drivers/include/drivers/usb_common.h index 9c29a0d0df..920a85e61b 100644 --- a/components/drivers/include/drivers/usb_common.h +++ b/components/drivers/include/drivers/usb_common.h @@ -112,7 +112,7 @@ extern "C" { #define USB_STRING_CONFIG_INDEX 0x04 #define USB_STRING_INTERFACE_INDEX 0x05 #define USB_STRING_OS_INDEX 0x06 -#define USB_STRING_MAX USB_STRING_OS_INDEX +#define USB_STRING_MAX 0xff #define USB_STRING_OS "MSFT100A" @@ -301,7 +301,7 @@ struct uconfig_descriptor rt_uint8_t iConfiguration; rt_uint8_t bmAttributes; rt_uint8_t MaxPower; - rt_uint8_t data[256]; + rt_uint8_t data[2048]; }; typedef struct uconfig_descriptor* ucfg_desc_t; diff --git a/components/drivers/include/drivers/usb_device.h b/components/drivers/include/drivers/usb_device.h index 1e76477dbc..3ce051dfaa 100644 --- a/components/drivers/include/drivers/usb_device.h +++ b/components/drivers/include/drivers/usb_device.h @@ -34,6 +34,10 @@ extern "C" { #define _PRODUCT_ID 0x0001 #endif +#ifndef MAX_INTF_STR +#define MAX_INTF_STR 20 +#endif + #define USB_BCD_DEVICE 0x0200 /* USB Specification Release Number in Binary-Coded Decimal */ #define USB_BCD_VERSION 0x0200 /* USB 2.0 */ #define EP0_IN_ADDR 0x80 @@ -193,7 +197,7 @@ struct udevice struct usb_qualifier_descriptor * dev_qualifier; usb_os_comp_id_desc_t os_comp_id_desc; const char** str; - + const char *str_intf[MAX_INTF_STR]; udevice_state_t state; rt_list_t cfg_list; uconfig_t curr_cfg; @@ -260,6 +264,7 @@ rt_err_t rt_usbd_event_signal(struct udev_msg* msg); rt_err_t rt_usbd_device_set_controller(udevice_t device, udcd_t dcd); rt_err_t rt_usbd_device_set_descriptor(udevice_t device, udev_desc_t dev_desc); rt_err_t rt_usbd_device_set_string(udevice_t device, const char** ustring); +rt_err_t rt_usbd_device_set_interface_string(udevice_t device, int index, const char* string); rt_err_t rt_usbd_device_set_qualifier(udevice_t device, struct usb_qualifier_descriptor* qualifier); rt_err_t rt_usbd_device_set_os_comp_id_desc(udevice_t device, usb_os_comp_id_desc_t os_comp_id_desc); rt_err_t rt_usbd_device_add_config(udevice_t device, uconfig_t cfg); diff --git a/components/drivers/include/ipc/workqueue.h b/components/drivers/include/ipc/workqueue.h index ccbc42b226..03904d852e 100644 --- a/components/drivers/include/ipc/workqueue.h +++ b/components/drivers/include/ipc/workqueue.h @@ -5,6 +5,7 @@ * * Change Logs: * Date Author Notes + * 2021-08-01 Meco Man remove rt_delayed_work_init() and rt_delayed_work structure */ #ifndef WORKQUEUE_H__ #define WORKQUEUE_H__ @@ -48,11 +49,6 @@ struct rt_work struct rt_workqueue *workqueue; }; -struct rt_delayed_work -{ - struct rt_work work; -}; - #ifdef RT_USING_HEAP /** * WorkQueue for DeviceDriver @@ -64,11 +60,12 @@ rt_err_t rt_workqueue_submit_work(struct rt_workqueue *queue, struct rt_work *wo rt_err_t rt_workqueue_cancel_work(struct rt_workqueue *queue, struct rt_work *work); rt_err_t rt_workqueue_cancel_work_sync(struct rt_workqueue *queue, struct rt_work *work); rt_err_t rt_workqueue_cancel_all_work(struct rt_workqueue *queue); +rt_err_t rt_workqueue_critical_work(struct rt_workqueue *queue, struct rt_work *work); #ifdef RT_USING_SYSTEM_WORKQUEUE rt_err_t rt_work_submit(struct rt_work *work, rt_tick_t time); rt_err_t rt_work_cancel(struct rt_work *work); -#endif +#endif /* RT_USING_SYSTEM_WORKQUEUE */ rt_inline void rt_work_init(struct rt_work *work, void (*work_func)(struct rt_work *work, void *work_data), void *work_data) @@ -81,10 +78,6 @@ rt_inline void rt_work_init(struct rt_work *work, void (*work_func)(struct rt_wo work->type = 0; } -void rt_delayed_work_init(struct rt_delayed_work *work, void (*work_func)(struct rt_work *work, - void *work_data), void *work_data); - -int rt_work_sys_workqueue_init(void); -#endif +#endif /* RT_USING_HEAP */ #endif diff --git a/components/drivers/include/rtdevice.h b/components/drivers/include/rtdevice.h index 82868e5aef..07a2be361e 100644 --- a/components/drivers/include/rtdevice.h +++ b/components/drivers/include/rtdevice.h @@ -57,7 +57,11 @@ extern "C" { #endif /* RT_USING_USB_HOST */ #ifdef RT_USING_SERIAL +#ifdef RT_USING_SERIAL_V2 +#include "drivers/serial_v2.h" +#else #include "drivers/serial.h" +#endif #endif /* RT_USING_SERIAL */ #ifdef RT_USING_I2C @@ -78,70 +82,76 @@ extern "C" { #include "drivers/mmcsd_core.h" #include "drivers/sd.h" #include "drivers/sdio.h" -#endif +#endif /* RT_USING_SDIO */ + #ifdef RT_USING_WDT #include "drivers/watchdog.h" -#endif +#endif /* RT_USING_WDT */ #ifdef RT_USING_PIN #include "drivers/pin.h" -#endif +#endif /* RT_USING_PIN */ + +#ifdef RT_USING_SENSOR +#include "drivers/sensor.h" +#endif /* RT_USING_SENSOR */ #ifdef RT_USING_CAN #include "drivers/can.h" -#endif +#endif /* RT_USING_CAN */ #ifdef RT_USING_HWTIMER #include "drivers/hwtimer.h" -#endif +#endif /* RT_USING_HWTIMER */ #ifdef RT_USING_AUDIO #include "drivers/audio.h" -#endif +#endif /* RT_USING_AUDIO */ #ifdef RT_USING_CPUTIME #include "drivers/cputime.h" -#endif +#endif /* RT_USING_CPUTIME */ #ifdef RT_USING_ADC #include "drivers/adc.h" -#endif +#endif /* RT_USING_ADC */ #ifdef RT_USING_DAC #include "drivers/dac.h" -#endif +#endif /* RT_USING_DAC */ #ifdef RT_USING_PWM #include "drivers/rt_drv_pwm.h" -#endif +#endif /* RT_USING_PWM */ #ifdef RT_USING_PM #include "drivers/pm.h" -#endif +#endif /* RT_USING_PM */ #ifdef RT_USING_WIFI #include "drivers/wlan.h" -#endif +#endif /* RT_USING_WIFI */ #ifdef MTD_USING_NOR #include "drivers/mtdnor.h" -#endif +#endif /* MTD_USING_NOR */ + #ifdef MTD_USING_NAND #include "drivers/mtdnand.h" -#endif +#endif /* MTD_USING_NAND */ #ifdef RT_USING_HWCRYPTO #include "drivers/crypto.h" -#endif +#endif /* RT_USING_HWCRYPTO */ #ifdef RT_USING_PULSE_ENCODER #include "drivers/pulse_encoder.h" -#endif +#endif /* RT_USING_PULSE_ENCODER */ #ifdef RT_USING_INPUT_CAPTURE #include "drivers/rt_inputcapture.h" -#endif +#endif /* RT_USING_INPUT_CAPTURE */ #ifdef __cplusplus } |