diff options
Diffstat (limited to 'components/drivers/usb/usbhost/class/mass.c')
| -rw-r--r-- | components/drivers/usb/usbhost/class/mass.c | 178 |
1 files changed, 89 insertions, 89 deletions
diff --git a/components/drivers/usb/usbhost/class/mass.c b/components/drivers/usb/usbhost/class/mass.c index 20048873f5..abd89a5efc 100644 --- a/components/drivers/usb/usbhost/class/mass.c +++ b/components/drivers/usb/usbhost/class/mass.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006-2018, RT-Thread Development Team + * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * @@ -24,29 +24,29 @@ static struct uclass_driver storage_driver; * * @param intf the interface instance. * @param max_lun the buffer to save max_lun. - * + * * @return the error code, RT_EOK on successfully. */ static rt_err_t _pipe_check(struct uhintf* intf, upipe_t pipe) { - struct uinstance* device; + struct uinstance* device; rt_err_t ret; ustor_t stor; - int size = 0; + int size = 0; struct ustorage_csw csw; if(intf == RT_NULL || pipe == RT_NULL) { rt_kprintf("the interface is not available\n"); return -RT_EIO; - } + } - /* get usb device instance from the interface instance */ - device = intf->device; + /* get usb device instance from the interface instance */ + device = intf->device; - /* get storage instance from the interface instance */ + /* get storage instance from the interface instance */ stor = (ustor_t)intf->user_data; - + /* check pipe status */ if(pipe->status == UPIPE_STATUS_OK) return RT_EOK; @@ -58,11 +58,11 @@ static rt_err_t _pipe_check(struct uhintf* intf, upipe_t pipe) if(pipe->status == UPIPE_STATUS_STALL) { /* clear the pipe stall status */ - ret = rt_usbh_clear_feature(device, pipe->ep.bEndpointAddress, + ret = rt_usbh_clear_feature(device, pipe->ep.bEndpointAddress, USB_FEATURE_ENDPOINT_HALT); if(ret != RT_EOK) return ret; } - + rt_thread_delay(50); @@ -73,14 +73,14 @@ static rt_err_t _pipe_check(struct uhintf* intf, upipe_t pipe) RT_DEBUG_LOG(RT_DEBUG_USB, ("clean storage in pipe stall\n")); /* it should receive csw after clear the stall feature */ - size = rt_usb_hcd_pipe_xfer(stor->pipe_in->inst->hcd, + size = rt_usb_hcd_pipe_xfer(stor->pipe_in->inst->hcd, stor->pipe_in, &csw, SIZEOF_CSW, 100); - if(size != SIZEOF_CSW) + if(size != SIZEOF_CSW) { rt_kprintf("receive the csw after stall failed\n"); return -RT_EIO; } - + return -RT_ERROR; } @@ -89,35 +89,35 @@ static rt_err_t _pipe_check(struct uhintf* intf, upipe_t pipe) * * @param intf the interface instance. * @param max_lun the buffer to save max_lun. - * + * * @return the error code, RT_EOK on successfully. */ -static rt_err_t rt_usb_bulk_only_xfer(struct uhintf* intf, +static rt_err_t rt_usb_bulk_only_xfer(struct uhintf* intf, ustorage_cbw_t cmd, rt_uint8_t* buffer, int timeout) { rt_size_t size; - rt_err_t ret; + rt_err_t ret; upipe_t pipe; struct ustorage_csw csw; ustor_t stor; - RT_ASSERT(cmd != RT_NULL); + RT_ASSERT(cmd != RT_NULL); if(intf == RT_NULL) { rt_kprintf("the interface is not available\n"); return -RT_EIO; } - - /* get storage instance from the interface instance */ + + /* get storage instance from the interface instance */ stor = (ustor_t)intf->user_data; do { /* send the cbw */ - size = rt_usb_hcd_pipe_xfer(stor->pipe_out->inst->hcd, stor->pipe_out, + size = rt_usb_hcd_pipe_xfer(stor->pipe_out->inst->hcd, stor->pipe_out, cmd, SIZEOF_CBW, timeout); - if(size != SIZEOF_CBW) + if(size != SIZEOF_CBW) { rt_kprintf("CBW size error\n"); return -RT_EIO; @@ -126,20 +126,20 @@ static rt_err_t rt_usb_bulk_only_xfer(struct uhintf* intf, { pipe = (cmd->dflags == CBWFLAGS_DIR_IN) ? stor->pipe_in : stor->pipe_out; - size = rt_usb_hcd_pipe_xfer(pipe->inst->hcd, pipe, (void*)buffer, + size = rt_usb_hcd_pipe_xfer(pipe->inst->hcd, pipe, (void*)buffer, cmd->xfer_len, timeout); if(size != cmd->xfer_len) { - rt_kprintf("request size %d, transfer size %d\n", + rt_kprintf("request size %d, transfer size %d\n", cmd->xfer_len, size); break; - } + } } - + /* receive the csw */ - size = rt_usb_hcd_pipe_xfer(stor->pipe_in->inst->hcd, stor->pipe_in, + size = rt_usb_hcd_pipe_xfer(stor->pipe_in->inst->hcd, stor->pipe_in, &csw, SIZEOF_CSW, timeout); - if(size != SIZEOF_CSW) + if(size != SIZEOF_CSW) { rt_kprintf("csw size error\n"); return -RT_EIO; @@ -148,12 +148,12 @@ static rt_err_t rt_usb_bulk_only_xfer(struct uhintf* intf, /* check in pipes status */ ret = _pipe_check(intf, stor->pipe_in); - if(ret != RT_EOK) + if(ret != RT_EOK) { rt_kprintf("in pipe error\n"); return ret; } - + /* check out pipes status */ ret = _pipe_check(intf, stor->pipe_out); if(ret != RT_EOK) @@ -161,20 +161,20 @@ static rt_err_t rt_usb_bulk_only_xfer(struct uhintf* intf, rt_kprintf("out pipe error\n"); return ret; } - + /* check csw status */ if(csw.signature != CSW_SIGNATURE || csw.tag != CBW_TAG_VALUE) { rt_kprintf("csw signature error\n"); return -RT_EIO; } - + if(csw.status != 0) { //rt_kprintf("csw status error:%d\n",csw.status); return -RT_ERROR; } - + return RT_EOK; } @@ -183,12 +183,12 @@ static rt_err_t rt_usb_bulk_only_xfer(struct uhintf* intf, * * @param intf the interface instance. * @param max_lun the buffer to save max_lun. - * + * * @return the error code, RT_EOK on successfully. */ rt_err_t rt_usbh_storage_get_max_lun(struct uhintf* intf, rt_uint8_t* max_lun) { - struct uinstance* device; + struct uinstance* device; struct urequest setup; int timeout = USB_TIMEOUT_BASIC; @@ -196,17 +196,17 @@ rt_err_t rt_usbh_storage_get_max_lun(struct uhintf* intf, rt_uint8_t* max_lun) { rt_kprintf("the interface is not available\n"); return -RT_EIO; - } + } /* parameter check */ RT_ASSERT(intf->device != RT_NULL); RT_DEBUG_LOG(RT_DEBUG_USB, ("rt_usbh_storage_get_max_lun\n")); - /* get usb device instance from the interface instance */ - device = intf->device; + /* get usb device instance from the interface instance */ + device = intf->device; /* construct the request */ - setup.request_type = USB_REQ_TYPE_DIR_IN | USB_REQ_TYPE_CLASS | + setup.request_type = USB_REQ_TYPE_DIR_IN | USB_REQ_TYPE_CLASS | USB_REQ_TYPE_INTERFACE; setup.bRequest = USBREQ_GET_MAX_LUN; setup.wValue = intf->intf_desc->bInterfaceNumber; @@ -233,13 +233,13 @@ rt_err_t rt_usbh_storage_get_max_lun(struct uhintf* intf, rt_uint8_t* max_lun) * This function will do USBREQ_MASS_STORAGE_RESET request for the usb interface instance. * * @param intf the interface instance. - * + * * @return the error code, RT_EOK on successfully. */ rt_err_t rt_usbh_storage_reset(struct uhintf* intf) { struct urequest setup; - struct uinstance* device; + struct uinstance* device; int timeout = USB_TIMEOUT_BASIC; /* parameter check */ @@ -247,16 +247,16 @@ rt_err_t rt_usbh_storage_reset(struct uhintf* intf) { rt_kprintf("the interface is not available\n"); return -RT_EIO; - } + } RT_ASSERT(intf->device != RT_NULL); RT_DEBUG_LOG(RT_DEBUG_USB, ("rt_usbh_storage_reset\n")); - /* get usb device instance from the interface instance */ - device = intf->device; + /* get usb device instance from the interface instance */ + device = intf->device; /* construct the request */ - setup.request_type = USB_REQ_TYPE_DIR_OUT | USB_REQ_TYPE_CLASS | + setup.request_type = USB_REQ_TYPE_DIR_OUT | USB_REQ_TYPE_CLASS | USB_REQ_TYPE_INTERFACE; setup.bRequest = USBREQ_MASS_STORAGE_RESET; setup.wIndex = intf->intf_desc->bInterfaceNumber; @@ -279,12 +279,12 @@ rt_err_t rt_usbh_storage_reset(struct uhintf* intf) * * @param intf the interface instance. * @param buffer the data buffer to save read data - * @param sector the start sector address to read. + * @param sector the start sector address to read. * @param sector the sector count to read. - * + * * @return the error code, RT_EOK on successfully. */ -rt_err_t rt_usbh_storage_read10(struct uhintf* intf, rt_uint8_t *buffer, +rt_err_t rt_usbh_storage_read10(struct uhintf* intf, rt_uint8_t *buffer, rt_uint32_t sector, rt_size_t count, int timeout) { struct ustorage_cbw cmd; @@ -294,8 +294,8 @@ rt_err_t rt_usbh_storage_read10(struct uhintf* intf, rt_uint8_t *buffer, { rt_kprintf("interface is not available\n"); return -RT_EIO; - } - + } + RT_ASSERT(intf->device != RT_NULL); RT_DEBUG_LOG(RT_DEBUG_USB, ("rt_usbh_storage_read10\n")); @@ -325,12 +325,12 @@ rt_err_t rt_usbh_storage_read10(struct uhintf* intf, rt_uint8_t *buffer, * * @param intf the interface instance. * @param buffer the data buffer to save write data - * @param sector the start sector address to write. + * @param sector the start sector address to write. * @param sector the sector count to write. - * + * * @return the error code, RT_EOK on successfully. */ -rt_err_t rt_usbh_storage_write10(struct uhintf* intf, rt_uint8_t *buffer, +rt_err_t rt_usbh_storage_write10(struct uhintf* intf, rt_uint8_t *buffer, rt_uint32_t sector, rt_size_t count, int timeout) { struct ustorage_cbw cmd; @@ -340,8 +340,8 @@ rt_err_t rt_usbh_storage_write10(struct uhintf* intf, rt_uint8_t *buffer, { rt_kprintf("the interface is not available\n"); return -RT_EIO; - } - + } + RT_ASSERT(intf->device != RT_NULL); RT_DEBUG_LOG(RT_DEBUG_USB, ("rt_usbh_storage_write10\n")); @@ -371,7 +371,7 @@ rt_err_t rt_usbh_storage_write10(struct uhintf* intf, rt_uint8_t *buffer, * * @param intf the interface instance. * @param buffer the data buffer to save sense data - * + * * @return the error code, RT_EOK on successfully. */ rt_err_t rt_usbh_storage_request_sense(struct uhintf* intf, rt_uint8_t* buffer) @@ -384,12 +384,12 @@ rt_err_t rt_usbh_storage_request_sense(struct uhintf* intf, rt_uint8_t* buffer) { rt_kprintf("the interface is not available\n"); return -RT_EIO; - } - + } + RT_ASSERT(intf->device != RT_NULL); RT_DEBUG_LOG(RT_DEBUG_USB, ("rt_usbh_storage_request_sense\n")); - /* construct the command block wrapper */ + /* construct the command block wrapper */ rt_memset(&cmd, 0, sizeof(struct ustorage_cbw)); cmd.signature = CBW_SIGNATURE; cmd.tag = CBW_TAG_VALUE; @@ -407,7 +407,7 @@ rt_err_t rt_usbh_storage_request_sense(struct uhintf* intf, rt_uint8_t* buffer) * This function will execute SCSI_TEST_UNIT_READY command to get unit ready status. * * @param intf the interface instance. - * + * * @return the error code, RT_EOK on successfully. */ rt_err_t rt_usbh_storage_test_unit_ready(struct uhintf* intf) @@ -420,8 +420,8 @@ rt_err_t rt_usbh_storage_test_unit_ready(struct uhintf* intf) { rt_kprintf("the interface is not available\n"); return -RT_EIO; - } - + } + RT_ASSERT(intf->device != RT_NULL); RT_DEBUG_LOG(RT_DEBUG_USB, ("rt_usbh_storage_test_unit_ready\n")); @@ -434,7 +434,7 @@ rt_err_t rt_usbh_storage_test_unit_ready(struct uhintf* intf) cmd.lun = 0; cmd.cb_len = 12; cmd.cb[0] = SCSI_TEST_UNIT_READY; - + return rt_usb_bulk_only_xfer(intf, &cmd, RT_NULL, timeout); } @@ -443,21 +443,21 @@ rt_err_t rt_usbh_storage_test_unit_ready(struct uhintf* intf) * * @param intf the interface instance. * @param buffer the data buffer to save inquiry data - * + * * @return the error code, RT_EOK on successfully. */ rt_err_t rt_usbh_storage_inquiry(struct uhintf* intf, rt_uint8_t* buffer) { struct ustorage_cbw cmd; int timeout = USB_TIMEOUT_LONG; - + /* parameter check */ if(intf == RT_NULL) { rt_kprintf("the interface is not available\n"); return -RT_EIO; - } - + } + RT_ASSERT(intf->device != RT_NULL); RT_DEBUG_LOG(RT_DEBUG_USB, ("rt_usbh_storage_inquiry\n")); @@ -480,7 +480,7 @@ rt_err_t rt_usbh_storage_inquiry(struct uhintf* intf, rt_uint8_t* buffer) * * @param intf the interface instance. * @param buffer the data buffer to save capacity data - * + * * @return the error code, RT_EOK on successfully. */ rt_err_t rt_usbh_storage_get_capacity(struct uhintf* intf, rt_uint8_t* buffer) @@ -493,7 +493,7 @@ rt_err_t rt_usbh_storage_get_capacity(struct uhintf* intf, rt_uint8_t* buffer) { rt_kprintf("the interface is not available\n"); return -RT_EIO; - } + } RT_ASSERT(intf->device != RT_NULL); RT_DEBUG_LOG(RT_DEBUG_USB, ("rt_usbh_storage_get_capacity\n")); @@ -513,17 +513,17 @@ rt_err_t rt_usbh_storage_get_capacity(struct uhintf* intf, rt_uint8_t* buffer) /** * This function will run mass storage class driver when usb device is detected - * and identified as a mass storage class device, it will continue to do the enumulate + * and identified as a mass storage class device, it will continue to do the enumulate * process. * * @param arg the argument. - * + * * @return the error code, RT_EOK on successfully. */ static rt_err_t rt_usbh_storage_enable(void* arg) { int i = 0; - rt_err_t ret; + rt_err_t ret; ustor_t stor; struct uhintf* intf = (struct uhintf*)arg; @@ -534,25 +534,25 @@ static rt_err_t rt_usbh_storage_enable(void* arg) return -RT_EIO; } - RT_DEBUG_LOG(RT_DEBUG_USB, ("subclass %d, protocal %d\n", + RT_DEBUG_LOG(RT_DEBUG_USB, ("subclass %d, protocal %d\n", intf->intf_desc->bInterfaceSubClass, intf->intf_desc->bInterfaceProtocol)); - + RT_DEBUG_LOG(RT_DEBUG_USB, ("rt_usbh_storage_run\n")); /* only support SCSI subclass and bulk only protocal */ - + stor = rt_malloc(sizeof(struct ustor)); RT_ASSERT(stor != RT_NULL); /* initilize the data structure */ - rt_memset(stor, 0, sizeof(struct ustor)); + rt_memset(stor, 0, sizeof(struct ustor)); intf->user_data = (void*)stor; for(i=0; i<intf->intf_desc->bNumEndpoints; i++) - { + { uep_desc_t ep_desc; - + /* get endpoint descriptor from interface descriptor */ rt_usbh_get_endpoint_descriptor(intf->intf_desc, i, &ep_desc); if(ep_desc == RT_NULL) @@ -560,11 +560,11 @@ static rt_err_t rt_usbh_storage_enable(void* arg) rt_kprintf("rt_usb_get_endpoint_descriptor error\n"); return -RT_ERROR; } - - /* the endpoint type of mass storage class should be BULK */ + + /* the endpoint type of mass storage class should be BULK */ if((ep_desc->bmAttributes & USB_EP_ATTR_TYPE_MASK) != USB_EP_ATTR_BULK) continue; - + /* allocate pipes according to the endpoint type */ if(ep_desc->bEndpointAddress & USB_DIR_IN) { @@ -572,7 +572,7 @@ static rt_err_t rt_usbh_storage_enable(void* arg) stor->pipe_in = rt_usb_instance_find_pipe(intf->device,ep_desc->bEndpointAddress); } else - { + { /* alloc an output pipe for the storage instance */ stor->pipe_out = rt_usb_instance_find_pipe(intf->device,ep_desc->bEndpointAddress); } @@ -583,8 +583,8 @@ static rt_err_t rt_usbh_storage_enable(void* arg) { rt_kprintf("pipe error, unsupported device\n"); return -RT_ERROR; - } - + } + /* should implement as callback */ ret = rt_udisk_run(intf); if(ret != RT_EOK) return ret; @@ -593,11 +593,11 @@ static rt_err_t rt_usbh_storage_enable(void* arg) } /** - * This function will be invoked when usb device plug out is detected and it would clean + * This function will be invoked when usb device plug out is detected and it would clean * and release all mass storage class related resources. * * @param arg the argument. - * + * * @return the error code, RT_EOK on successfully. */ static rt_err_t rt_usbh_storage_disable(void* arg) @@ -617,7 +617,7 @@ static rt_err_t rt_usbh_storage_disable(void* arg) rt_udisk_stop(intf); - + /* free storage instance */ if(stor != RT_NULL) rt_free(stor); return RT_EOK; @@ -626,13 +626,13 @@ static rt_err_t rt_usbh_storage_disable(void* arg) /** * This function will register mass storage class driver to the usb class driver manager. * and it should be invoked in the usb system initialization. - * + * * @return the error code, RT_EOK on successfully. */ ucd_t rt_usbh_class_driver_storage(void) { storage_driver.class_code = USB_CLASS_MASS_STORAGE; - + storage_driver.enable = rt_usbh_storage_enable; storage_driver.disable = rt_usbh_storage_disable; |
