| Age | Commit message (Collapse) | Author |
|---|
|
|
|
timer function is not supported
|
|
Some drivers use INIT_BOARD_EXPORT, it is not necessary,
it is enough to use INIT_DEVICE_EXPORT for genearl drivers.
Signed-off-by: Chen Wang <[email protected]>
|
|
|
|
bsp: cvitek: accuulated bugfixes for wdt driver
|
|
bsp: cvitek: re-wrote spi driver
|
|
bsp: cvitek: re-wrote i2c driver
|
|
See `components/drivers/include/drivers/watchdog.h`
maco definition of
RT_DEVICE_CTRL_WDT_GET_TIMEOUT
RT_DEVICE_CTRL_WDT_SET_TIMEOUT
RT_DEVICE_CTRL_WDT_GET_TIMELEFT
The wdt timeout time unit is defined as seconds in the API, but
the code incorrectly uses ms.
Correct this and comply with the API definition.
Signed-off-by: Chen Wang <[email protected]>
Reviewed-by: Yuanjie He <[email protected]>
Reviewed-by: Shell <[email protected]>
|
|
Rewrote the spi driver.
Reuse the driver code from https://github.com/sophgo/cvi_alios_open,
which is Apache 2.0 licenced.
Signed-off-by: flyingcys <[email protected]>
Reviewed-by: Chen Wang <[email protected]>
|
|
|
|
```
./bsp/cvitek/drivers/drv_wdt.c: In function '_wdt_control':
warning: assignment to 'void *' from 'unsigned int' makes pointer
from integer without a cast [-Wint-conversion]
119 | wdt_device->parent.user_data = (rt_uint32_t)(*(rt_uint32_t *)arg);
| ^
warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
122 | *(rt_uint32_t *)arg = (rt_uint32_t)wdt_device->parent.user_data;
| ^
```
Rootcasue: It's not portable to store integar in a pointer.
Solution: use global _wdt_dev to store the timeout value.
Signed-off-by: Chen Wang <[email protected]>
|
|
Optimize the original i2c driver code.
Signed-off-by: flyingcys <[email protected]>
Reviewed-by: Chen Wang <[email protected]>
|
|
Signed-off-by: Chen Wang <[email protected]>
|
|
Board level pin available info:
duo & duo256:
NAME SPI CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
GP6 SPI2_SCK PWR_GPIO[23] SD1_CLK__SPI2_SCK
GP7 SPI2_SDO PWR_GPIO[22] SD1_CMD__SPI2_SDO
GP8 SPI2_SDI PWR_GPIO[21] SD1_D0__SPI2_SDI
GP9 SPI2_CS_X PWR_GPIO[18] SD1_D3__SPI2_CS_X
Signed-off-by: Chen Wang <[email protected]>
|
|
Board level pin available info is summarized and list here for memo:
Duo:
NAME PWM CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
PWM-1
GP9 PWM4 PWR_GPIO[18] SD1_D3__PWM_4
GP12 PWM4 XGPIOA[16] UART0_TX__PWM_4
GP4 PWM5 PWR_GPIO[19] SD1_D2__PWM_5
GP13 PWM5 XGPIOA[17] UART0_RX__PWM_5
GP5 PWM6 PWR_GPIO[20] SD1_D1__PWM_6
GP8 PMW7 PWR_GPIO[21] SD1_D0__PWM_7
PWM-2
GP7 PWM8 PWR_GPIO[22] SD1_CMD__PWM_8
GP6 PWM9 PWR_GPIO[23] SD1_CLK__PWM_9
GP2 PWM10 PWR_GPIO[26] SD1_GPIO1__PWM_10
GP3 PWM11 PWR_GPIO[25] SD1_GPIO0__PWM_11
Duo256:
NAME PWM CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
PWM-1
GP9 PWM4 PWR_GPIO[18] SD1_D3__PWM_4
GP12 PWM4 XGPIOA[16] UART0_TX__PWM_4
GP4 PWM5 PWR_GPIO[19] SD1_D2__PWM_5
GP13 PWM5 XGPIOA[17] UART0_RX__PWM_5
GP3 PWM6 XGPIOA[18] JTAG_CPU_TCK__PWM_6
GP5 PWM6 PWR_GPIO[20] SD1_D1__PWM_6
GP2 PWM7 XGPIOA[19] JTAG_CPU_TMS__PWM_7
GP8 PMW7 PWR_GPIO[21] SD1_D0__PWM_7
PWM-2
GP7 PWM8 PWR_GPIO[22] SD1_CMD__PWM_8
GP6 PWM9 PWR_GPIO[23] SD1_CLK__PWM_9
GP10 PWM10 XGPIOC[14] PAD_MIPI_TXM1__PWM_10
GP11 PWM11 XGPIOC[15] PAD_MIPI_TXP1__PWM_11
Signed-off-by: Chen Wang <[email protected]>
|
|
Board level UART pinmux summary, following capability
should be controlled by pinname whitelist.
Duo:
NAME UART CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
GP13 UART0_RX XGPIOA[17] UART0_RX__UART0_RX
GP12 UART0_TX XGPIOA[16] UART0_TX__UART0_TX
GP1 UART1_RX XGPIOA[29] IIC0_SDA__UART1_RX
GP13 UART1_RX XGPIOA[17] UART0_RX__UART1_RX
GP0 UART1_TX XGPIOA[28] IIC0_SCL__UART1_TX
GP12 UART1_TX XGPIOA[16] UART0_TX__UART1_TX
GP1 UART2_RX XGPIOA[29] IIC0_SDA__UART2_RX
GP5 UART2_RX PWR_GPIO[20] SD1_D1__UART2_RX
GP0 UART2_TX XGPIOA[28] IIC0_SCL__UART2_TX
GP4 UART2_TX PWR_GPIO[19] SD1_D2__UART2_TX
GP5 UART3_RX PWR_GPIO[20] SD1_D1__UART3_RX
GP4 UART3_TX PWR_GPIO[19] SD1_D2__UART3_TX
GP3 UART4_RX PWR_GPIO[25] SD1_GPIO0__UART4_RX
GP2 UART4_TX PWR_GPIO[26] SD1_GPIO1__UART4_TX
Duo 256m:
NAME UART CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
GP13 UART0_RX XGPIOA[17] UART0_RX__UART0_RX
GP12 UART0_TX XGPIOA[16] UART0_TX__UART0_TX
GP1 UART1_RX XGPIOA[29] IIC0_SDA__UART1_RX
GP3 UART1_RX XGPIOA[18] JTAG_CPU_TCK__UART1_RX
GP13 UART1_RX XGPIOA[17] UART0_RX__UART1_RX
GP0 UART1_TX XGPIOA[28] IIC0_SCL__UART1_TX
GP2 UART1_TX XGPIOA[19] JTAG_CPU_TMS__UART1_TX
GP12 UART1_TX XGPIOA[16] UART0_TX__UART1_TX
GP1 UART2_RX XGPIOA[29] IIC0_SDA__UART2_RX
GP5 UART2_RX PWR_GPIO[20] SD1_D1__UART2_RX
GP0 UART2_TX XGPIOA[28] IIC0_SCL__UART2_TX
GP4 UART2_TX PWR_GPIO[19] SD1_D2__UART2_TX
GP5 UART3_RX PWR_GPIO[20] SD1_D1__UART3_RX
GP4 UART3_TX PWR_GPIO[19] SD1_D2__UART3_TX
Note: this patch also update the .config and rtconfig.h
because this patch modify some configuration items's name,
for example: RT_USIMG_UART0 -> BSP_USING_UART0.
FIXME: only handle RISC-V related, no ARM.
Signed-off-by: Chen Wang <[email protected]>
|
|
Based on new pinmux framework, add configuration for uart.
Board level pin available info is summarized and should be
controlled by pin whitelist.
Duo
NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
GP0 I2C0_SCL XGPIOA[28] IIC0_SCL__IIC0_SCL
GP1 I2C0_SDA XGPIOA[29] IIC0_SDA__IIC0_SDA
GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL
GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL
GP11 I2C1_SCL XGPIOC[10] PAD_MIPIRX0N__IIC1_SCL
GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA
GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA
GP10 I2C1_SDA XGPIOC[9] PAD_MIPIRX1P__IIC1_SDA
GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL
GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA
Duo256m
NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
GP4 I2C1_SCL PWR_GPIO[19] SD1_D2__IIC1_SCL
GP9 I2C1_SCL PWR_GPIO[18] SD1_D3__IIC1_SCL
GP5 I2C1_SDA PWR_GPIO[20] SD1_D1__IIC1_SDA
GP8 I2C1_SDA PWR_GPIO[21] SD1_D0__IIC1_SDA
GP11 I2C2_SCL XGPIOC[15] PAD_MIPI_TXP1__IIC2_SCL
GP10 I2C2_SDA XGPIOC[14] PAD_MIPI_TXM1__IIC2_SDA
GP7 I2C3_SCL PWR_GPIO[22] SD1_CMD__IIC3_SCL
GP6 I2C3_SDA PWR_GPIO[23] SD1_CLK__IIC3_SDA
Duo S(Note, we have not supported duo S, just list for memo)
NAME I2C CV1800B/GPIO <PINNAME>__<FUNCNAME>
---- --- ------------ ---------------------
J3-B18 I2C1_SCL XGPIOB[18] VIVO_D3__IIC1_SCL
J3-B12 I2C1_SCL XGPIOB[12] VIVO_D9__IIC1_SCL
J3-B11 I2C1_SDA XGPIOB[11] VIVO_D10__IIC1_SDA
J3-B13 I2C2_SCL XGPIOB[13] VIVO_D8__IIC2_SCL
J4-E1 I2C2_SCL PWR_GPIO[1] PWR_GPIO1__IIC2_SCL
J3-B14 I2C2_SDA XGPIOB[14] VIVO_D7__IIC2_SDA
J4-E2 I2C2_SDA PWR_GPIO[2] PWR_GPIO2__IIC2_SDA
J3-B20 I2C4_SCL XGPIOB[20] VIVO_D1__IIC4_SCL
J4-B1 I2C4_SCL XGPIOB[1] ADC3__IIC4_SCL
J3-B21 I2C4_SDA XGPIOB[21] VIVO_D0__IIC4_SDA
J4-B2 I2C4_SDA XGPIOB[2] ADC2__IIC4_SDA
Signed-off-by: Chen Wang <[email protected]>
|
|
The ADC controller needs to be calibrated during the initialization
phase, otherwise the measured voltage value will be inaccurate.
Signed-off-by: Chen Wang <[email protected]>
|
|
In the new design, we require the user to manually enter the
PinName (as a string) in menuconfig instead of being given
menu items to select.
The original method will lead to too many menu item-related
macros being defined in the code, causing ifdef and other
codes scatter everywhere in the driver code, which is
inconvenient to maintain.
The new design adds a pinmux driver module to manage the
multiplexing of pins. This patch provides this driver module.
P.S., the reason why users are allowed to specify pinname
in a string instead of the pin number is mainly because
the technical manual provided by the SOC manufacturer
does not have numbers for some pins, only names.
Signed-off-by: Chen Wang <[email protected]>
Reviewed-by: Yuanjie He <[email protected]>
Reviewed-by: Shell <[email protected]>
|
|
The contents of the SOC type part in the Kconfig configuration
are retained, and other parts related to I2C pin multiplexing
selection have been rolled back.
Signed-off-by: Chen Wang <[email protected]>
Reviewed-by: Yuanjie He <[email protected]>
Reviewed-by: Shell <[email protected]>
|
|
* [bsp][hpmicro] add weak handle_trap implementation
- added weak handle_trap implementation
Signed-off-by: Fan YANG <[email protected]>
* [libcpu][risc-v][common] remove weak handle_trap function
- removed weak handle_trap function from trap_common.c
Signed-off-by: Fan YANG <[email protected]>
---------
Signed-off-by: Fan YANG <[email protected]>
|
|
The changes unify the tick.c implementations for all risc-v64
architectures, leveraging the CPUTIME feature. This refactoring was
necessary to streamline the codebase, and ensure consistent timer
handling across different platforms.
Changes:
- Updated `Kconfig` in `bsp/cvitek/cv18xx_risc-v` to fix formatting issues.
- Updated .config for BSPs to update `CPUTIME_TIMER_FREQ`
- Updated header of for API `riscv_cputime_init`
- Initialized riscv timer on `rt_hw_tick_init`
- Refactored `tick.c` and `tick.h` in `libcpu/risc-v/t-head/c906` and `libcpu/risc-v/virt64`:
- Replaced direct use of `rdtime` with `clock_cpu_gettime`.
- Removed redundant timer frequency definitions.
- Added static assertions to check the value of `CPUTIME_TIMER_FREQ`.
- Initialized `tick_cycles` based on `CPUTIME_TIMER_FREQ`.
- Integrated `ktime` support for tick initialization.
Signed-off-by: Shell <[email protected]>
Reviewed-on: https://github.com/RT-Thread/rt-thread/pull/9164
Reviewed-by: Chen Wang <[email protected]>
|
|
|
|
ioremap后地址可能超32位
|
|
|
|
* [bsp/allwinner] feat: porting to RT_USING_DEVICE_OPS
This patch ports the codebase to use the RT_USING_DEVICE_OPS structure,
which is required by v5.1.0 Smart kernel, improves modularity and makes
it easier to manage device operations by consolidating them into a
single structure, enhancing maintainability and future scalability.
Changes:
- Added RT_USING_DEVICE_OPS conditionals to partition.c and drv_sdmmc.c.
- Defined rt_device_ops structures for partition and sdmmc drivers.
- Updated device initialization to use the ops structure if defined.
- Replaced direct function calls with rt_dev_control, rt_dev_read, and
rt_dev_write macros where applicable.
- Removed redundant us_delay function from os.c.
Signed-off-by: Shell <[email protected]>
* feat: update configuration
* feat: fixup compiler warning
---------
Signed-off-by: Shell <[email protected]>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* fix(hpmicro): remove duplicate usb variable
* update(cherryusb): update to v1.3.1
|
|
* -以ev_hc32f4a0_lqfp176为模板进行修改
* -修改对应引脚
* -更新readme
* -update readme
* -添加 lckfb-hc32f4a0-lqfp100
|
|
* [BSP][nxp]增加wifi_weather_sample.c
* [BSP][nsp]增加wifi_weather_sample.c
|
|
|
|
|
|
天空星高配版的FLASH从GD25Q32升级为W25Q128 (#9108)
* -更新芯片型号和板子型号
* -天空星目前只有青春版（没有贴外部flash），高配版（有贴外部flash）正在生产，所贴的SPI FLASH 从GD25Q32升级为W25Q128。
|
|
|
|
|
|
* 增加putc超时处理机制,防止死循环
* 优化TX中断初始化与卸载
* 添加TX中断方式实现
|
|
there's no sdio/eth in HW, remove it
|
|
This is the SW2 button, a.k.a wakeup button on the board. Another
choice is SW3 a.k.a ISP button which is connected to P0_6.
|
|
The upper/lower case matters under *nix
|
|
|
|
|
|
|
