| Age | Commit message (Collapse) | Author |
|---|
|
* [libcpu][risc-v] Refactor the RISC-V architecture port
Introduce an opt-in unified RISC-V common layer for RV32 and RV64 while keeping existing BSPs on the legacy implementation during migration.
- use ARCH_RISCV and ARCH_CPU_64BIT for architecture and XLEN selection
- unify context, trap, MMU, cache, timer, SBI, SMP and ISA handling
- add PLIC, CLIC, ACLINT, APLIC and IMSIC support
- map physical hart IDs to contiguous logical CPU IDs
- add T-Head vendor overrides while preserving legacy ports
- migrate qemu-virt64-riscv with RV32 and RV64 support
- update clock_time, MM, LWP, OFW, PCI and Rust integration
Existing BSPs continue using legacy_common or common64 unless they select RT_USING_RISCV_NEW_COMMON.
Signed-off-by: GuEe-GUI <[email protected]>
* [libcpu][risc-v] skip disabled CPU nodes in early FDT walk
Rbb666 noted that rt_hw_fdt_install_early() walked every /cpus child
without checking status, so disabled cores still joined hart registration
and MMU capability probing. Skip nodes that are not okay/ok via
rt_fdt_device_is_available() before reading reg or mmu-type.
Signed-off-by: seteiro <[email protected]>
* [libcpu][risc-v] Fix per-CPU page table mapping
- reuse existing non-leaf page table entries when mapping per-CPU areas
- reject leaf entry conflicts instead of overwriting mappings
Signed-off-by: GuEe-GUI <[email protected]>
---------
Signed-off-by: GuEe-GUI <[email protected]>
Signed-off-by: seteiro <[email protected]>
Co-authored-by: seteiro <[email protected]>
|
|
|
|
* [components][clock_time] Refactor time subsystem around clock_time
Introduce the clock_time core with clock source/event separation, high-resolution scheduling, and boot-time helpers, plus clock_timer adapters for timer peripherals.
Remove legacy ktime/cputime/hwtimer implementations and migrate arch and BSP time paths to the new subsystem while keeping POSIX time integration functional.
Update drivers, Kconfig/SConscript wiring, documentation, and tests; add clock_time overview docs and align naming to clock_boottime/clock_hrtimer/clock_timer.
* [components][clock_time] Use BSP-provided clock timer frequency on riscv64
* [risc-v] Use runtime clock timer frequency for tick and delays
* [bsp] Add clock timer frequency hooks for riscv64 boards
* [bsp] Update Renesas RA driver doc clock_timer link
* [bsp] Sync zynqmp-r5-axu4ev rtconfig after config refresh
* [bsp][rk3500] Update rk3500 clock configuration
* [bsp][hpmicro] Add rt_hw_us_delay hook and update board delays
* [bsp][stm32l496-st-nucleo] enable clock_time for hwtimer sample in ci
* [bsp][hpmicro] Fix rtconfig include scope for hpm6750evk
Move rtconfig.h include outside the ENET_MULTIPLE_PORT guard for hpm6750evk and hpm6750evk2 so configuration macros are available regardless of ENET settings.
* [bsp][raspi3] select clock time for systimer
* [bsp][hpm5300evk] Trim trailing blank line
* [bsp][hpm5301evklite] Trim trailing blank line
* [bsp][hpm5e00evk] Trim trailing blank line
* [bsp][hpm6200evk] Trim trailing blank line
* [bsp][hpm6300evk] Trim trailing blank line
* [bsp][hpm6750evk] Trim trailing blank line
* [bsp][hpm6750evk2] Trim trailing blank line
* [bsp][hpm6750evkmini] Trim trailing blank line
* [bsp][hpm6800evk] Trim trailing blank line
* [bsp][hpm6e00evk] Trim trailing blank line
* [bsp][nxp] switch lpc178x to gcc and remove mcx timer source
* [bsp][stm32] fix the CONFIG_RT_USING_CLOCK_TIME issue.
* [docs][clock_time] add clock time documentation
* [docs][clock_time] Update clock time subsystem documentation
- Update device driver index to use correct page reference
- Clarify upper layer responsibilities in architecture overview
- Update README to describe POSIX/libc, Soft RTC, and device driver usage
- Refine architecture diagram with improved layout and color scheme
- Remove obsolete clock_timer.md file
* [kernel][utest] Trim trailing space
* [clock_time] Fix hrtimer wrap handling
* [clock_time] fix the static rt_inline issue
* [clock_time] fix the rt_clock_hrtimer_control result issue
|
|
|
|
memory access
|
|
for vDSO building.
|
|
- Implemented vDSO functionality for the RISC-V architecture, including the necessary source files and linker scripts.
- Introduced a new `vdso_sys.c` file for RISC-V, containing functions to handle time retrieval using the vDSO mechanism.
- Created architecture-specific linker scripts (`vdso.lds.S`) for both AArch64 and RISC-V.
- Updated the build system to support vDSO compilation for RISC-V, including necessary adjustments in `SConstruct` files.
- Refactored existing vDSO code to improve compatibility and maintainability across architectures.
- Adjusted the maximum number of PTY devices in the terminal configuration from 64 to 32 for better resource management.
- Fixed minor issues in existing code, including correcting the path for the vDSO shared library and ensuring proper function definitions.
|
|
* [lwp/riscv]修正用户态参数空间占用堆空间的问题
|
|
|
|
* [rv/virt/stackframe.h]添加GP寄存器保存偏移量宏
* 【rv/c906/stackframe.h]定义GP寄存器存储偏移量
* [rv]信号处理切换到用户态前恢复gp
|
|
* [libcpu] support for ARCH_REMAP_KERNEL
These changes introduce support for the ARCH_REMAP_KERNEL configuration,
which isolates kernel space in high virtual address regions. This feature
is necessary to enhance memory protection and management by segregating
user and kernel spaces more effectively.
Changes:
- Updated conditional macros to check for ARCH_REMAP_KERNEL instead of
ARCH_KERNEL_IN_HIGH_VA in board initialization files to reflect the new
configuration option.
- Modified qemu-virt64-riscv Kconfig and SConstruct files to include and
utilize ARCH_REMAP_KERNEL.
- Created a new linker script `link_smart.lds` for smart linking in qemu-virt64-riscv.
- Updated rtconfig.py to use a more flexible execution path setup.
- Enhanced user address space definitions in `lwp_arch.h` to support the
new virtual address mappings.
- Adjusted kernel memory initialization and mapping logic in `c906/mmu.c`
and `virt64/mmu.c` to account for high virtual address regions.
- Added Kconfig option to enable ARCH_REMAP_KERNEL for RISCV64 architectures.
- Enhanced memory setup functions to support new mapping scheme, including
updates to early page table setup and address relocation logic.
These modifications ensure that the system can utilize high memory
addresses for the kernel, improving memory isolation and system stability.
Signed-off-by: Shell <[email protected]>
* fixup: CI run failed
* bsp: default config without using smart
* fixup: static checks
* restore rt_hw_mmu_kernel_map_init for D1
---------
Signed-off-by: Shell <[email protected]>
|
|
|
|
* [libcpu] rv64: discard rt_current_thread
* arm: using rt_thread_self to fetch current TCB
|
|
Signed-off-by: xqyjlj <[email protected]>
Signed-off-by: Shell <[email protected]>
Co-authored-by: xqyjlj <[email protected]>
|
|
Signed-off-by: Shell <[email protected]>
|
|
|
|
|
|
Signed-off-by: shell <[email protected]>
Signed-off-by: shell <[email protected]>
Signed-off-by: Shell <[email protected]>
|
|
Signed-off-by: Shell <[email protected]>
|
|
|
|
* [mm/page] multi-list page manager
[mm/page] page debugger
[libcpu/aarch64] hugepage support
* [quality] remove void-arith
* [format] remove kasan codes
|
|
|
|
[rt-smart] handling kernel from accessing unmapped user stack
|
|
synchronize virtual memory system works.
adding kernel virtual memory management layer for page-based MMU enabled architecture
porting libcpu MMU codes
porting lwp memory related codes
|
|
* [dfs] sync cromfs
* [rt-smart]Weaken RT_USING_LWP, use RT_USING_SMART as macro configuration
* [format] fix some format issue.
|
|
* [risc-v/libcpu] porting Smart & RTOS
* [fix] rv64 plic
* [risc-v/rv64] remove macro in rtdef
|
|
* Synchronize the code of the rt mart branch to the master branch.
* TTY device
* Add lwP code from rt-smart
* Add vnode in DFS, but DFS will be re-write for rt-smart
* There are three libcpu for rt-smart:
* arm/cortex-a, arm/aarch64
* riscv64
Co-authored-by: Rbb666 <[email protected]>
Co-authored-by: zhkag <[email protected]>
|
