1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
|
/**
*****************************************************************************
* @file cmem7_tim.h
*
* @brief CMEM7 timer header file
*
*
* @version V1.0
* @date 3. September 2013
*
* @note
*
*****************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, CAPITAL-MICRO SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>© COPYRIGHT 2013 Capital-micro </center></h2>
*****************************************************************************
*/
#ifndef __CMEM7_TIM_H
#define __CMEM7_TIM_H
#ifdef __cplusplus
extern "C" {
#endif
#include "cmem7.h"
#include "cmem7_conf.h"
#define IS_TIM_ALL_PERIPH(PERIPH) (((PERIPH) == TIMER0) || \
((PERIPH) == TIMER1) || \
((PERIPH) == TIMER2) || \
((PERIPH) == TIMER3))
/**
* @brief Timer initialization
* @note This function should be called at first before any other interfaces.
* @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3
* @param[in] Ms overflow micro-seconds of the specific timer
* @retval None
*/
void TIM_Init(TIMER0_Type* Timx, uint16_t Ms);
/**
* @brief Enable or disable timer interrupt.
* @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3
* @param[in] Enable The bit indicates if the specific interrupt is enable or not
* @retval None
*/
void TIM_EnableInt(TIMER0_Type* Timx, BOOL Enable);
/**
* @brief Check the specific interrupt is set or not
* @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3
* @retval BOOL The bit indicates if the specific interrupt is set or not
*/
BOOL TIM_GetIntStatus(TIMER0_Type* Timx);
/**
* @brief Clear specific interrupts
* @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3
* @retval None
*/
void TIM_ClearInt(TIMER0_Type* Timx);
/**
* @brief Enable or disable timer.
* @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3
* @param[in] Enable The bit indicates if the specific timer is enable or not
* @retval None
*/
void TIM_Enable(TIMER0_Type* Timx, BOOL Enable);
/**
* @brief Check the specific timer is overflow or not
* @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3
* @retval BOOL The bit indicates if the specific timer is overflow or not
*/
BOOL TIM_IsOverflow(TIMER0_Type* Timx);
/**
* @brief Get current counter of timer
* @param[in] Timx Timer peripheral, which is timer0, timer1, timer2 or timer3
* @retval uint32_t current counter
*/
uint32_t TIM_GetCounter(TIMER0_Type* Timx);
#ifdef __cplusplus
}
#endif
#endif /*__CMEM7_TIM_H */
|
