path: root/bsp/allwinner/libraries/sunxi-hal/include/hal/hal_dma.h

/*
* Copyright (c) 2019-2025 Allwinner Technology Co., Ltd. ALL rights reserved.
*
* Allwinner is a trademark of Allwinner Technology Co.,Ltd., registered in
* the the People's Republic of China and other countries.
* All Allwinner Technology Co.,Ltd. trademarks are used with permission.
*
* DISCLAIMER
* THIRD PARTY LICENCES MAY BE REQUIRED TO IMPLEMENT THE SOLUTION/PRODUCT.
* IF YOU NEED TO INTEGRATE THIRD PARTY¡¯S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.)
* IN ALLWINNERS¡¯SDK OR PRODUCTS, YOU SHALL BE SOLELY RESPONSIBLE TO OBTAIN
* ALL APPROPRIATELY REQUIRED THIRD PARTY LICENCES.
* ALLWINNER SHALL HAVE NO WARRANTY, INDEMNITY OR OTHER OBLIGATIONS WITH RESPECT TO MATTERS
* COVERED UNDER ANY REQUIRED THIRD PARTY LICENSE.
* YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY¡¯S TECHNOLOGY.
*
*
* THIS SOFTWARE IS PROVIDED BY ALLWINNER"AS IS" AND TO THE MAXIMUM EXTENT
* PERMITTED BY LAW, ALLWINNER EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND,
* WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION REGARDING
* THE TITLE, NON-INFRINGEMENT, ACCURACY, CONDITION, COMPLETENESS, PERFORMANCE
* OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
* IN NO EVENT SHALL ALLWINNER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS, OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __SUNXI_HAL_DMA_H__
#define __SUNXI_HAL_DMA_H__

#include <stdint.h>
#include <stdbool.h>
#include <stdio.h>

/*
 * include the platform dma header file.
 */
#include <dma/platform-dma.h>

#ifdef __cplusplus
extern "C" {
#endif

/* #define DMA_DEBUG */

#define HEXADECIMAL (0x10)
#define REG_INTERVAL (0x04)
#define REG_CL (0x0c)

//TODO:move reg list to sunxiwxx.h
#define HIGH_CHAN       8

#define DMA_IRQ_EN(x)       (SUNXI_DMAC_PBASE + (0x00 + ((x) << 2)))        /* Interrupt enable register */
#define DMA_IRQ_STAT(x)     (SUNXI_DMAC_PBASE + (0x10 + ((x) << 2)))        /* Interrupt status register */
#define DMA_SECURE      (SUNXI_DMAC_PBASE + 0x20)               /* DMA security register */
#define DMA_GATE        (SUNXI_DMAC_PBASE + 0x28)               /* DMA gating register */
#define DMA_MCLK_GATE       0x04
#define DMA_COMMON_GATE     0x02
#define DMA_CHAN_GATE       0x01
#define DMA_STAT        (SUNXI_DMAC_PBASE + 0x30)           /* DMA Status Register RO */
#define DMA_ENABLE(x)       (SUNXI_DMAC_PBASE + (0x100 + ((x + START_CHAN_OFFSET) << 6)))   /* Channels enable register */
#define DMA_PAUSE(x)        (SUNXI_DMAC_PBASE + (0x104 + ((x + START_CHAN_OFFSET) << 6)))   /* DMA Channels pause register */
#define DMA_LLI_ADDR(x)     (SUNXI_DMAC_PBASE + (0x108 + ((x + START_CHAN_OFFSET) << 6)))   /* Descriptor address register */
#define DMA_CFG(x)      (SUNXI_DMAC_PBASE + (0x10C + ((x + START_CHAN_OFFSET) << 6)))   /* Configuration register RO */
#define DMA_CUR_SRC(x)      (SUNXI_DMAC_PBASE + (0x110 + ((x + START_CHAN_OFFSET) << 6)))   /* Current source address RO */
#define DMA_CUR_DST(x)      (SUNXI_DMAC_PBASE + (0x114 + ((x + START_CHAN_OFFSET) << 6)))   /* Current destination address RO */
#define DMA_CNT(x)      (SUNXI_DMAC_PBASE + (0x118 + ((x + START_CHAN_OFFSET) << 6)))   /* Byte counter left register RO */
#define DMA_PARA(x)     (SUNXI_DMAC_PBASE + (0x11C + ((x + START_CHAN_OFFSET) << 6)))   /* Parameter register RO */
#define LINK_END        0xFFFFF800          /* lastest link must be 0xfffff800 */

/* DMA mode register */
#define DMA_OP_MODE(x)      (SUNXI_DMAC_PBASE + (0x128 + ((x + START_CHAN_OFFSET) << 6)))   /* DMA mode register */
#define SRC_HS_MASK     (0x1 << 2)          /* bit 2: Source handshake mode */
#define DST_HS_MASK     (0x1 << 3)          /* bit 3: Destination handshake mode */

#define SET_OP_MODE(x, val) ({  \
        writel(val,DMA_OP_MODE(x)); \
        })


#define SHIFT_IRQ_MASK(val, ch) ({  \
        (ch + START_CHAN_OFFSET) >= HIGH_CHAN   \
        ? (val) << ((ch + START_CHAN_OFFSET - HIGH_CHAN) << 2) \
        : (val) << ((ch + START_CHAN_OFFSET) << 2); \
        })

#define SHIFT_PENDING_MASK(val, ch) ({  \
        (ch + START_CHAN_OFFSET) >= HIGH_CHAN   \
        ? (val) << ((ch + START_CHAN_OFFSET - HIGH_CHAN) << 2) \
        : (val) << ((ch + START_CHAN_OFFSET) << 2); \
        })

#define IRQ_HALF        0x01            /* Half package transfer interrupt pending */
#define IRQ_PKG         0x02            /* One package complete interrupt pending */
#define IRQ_QUEUE       0x04            /* All list complete transfer interrupt pending */

/* DMA channel configuration register */
/* The detail information of DMA configuration */
#define SRC_WIDTH(x)        ((x) << 9)
#define SRC_BURST(x)        ((x) << 6)
#define SRC_IO_MODE     (0x01 << 8)
#define SRC_LINEAR_MODE     (0x00 << 8)
#define SRC_DRQ(x)      ((x) << 0)
#define DST_WIDTH(x)        ((x) << 25)
#define DST_BURST(x)        ((x) << 22)
#define DST_IO_MODE     (0x01 << 24)
#define DST_LINEAR_MODE     (0x00 << 24)
#define DST_DRQ(x)      ((x) << 16)
#define CHAN_START      1
#define CHAN_STOP       0
#define CHAN_PAUSE      1
#define CHAN_RESUME     0
#define NORMAL_WAIT     (8 << 0)

#define GET_SRC_DRQ(x)      ((x) & 0x000000ff)
#define GET_DST_DRQ(x)      ((x) & 0x00ff0000)

struct sunxi_dma_lli {
    uint32_t    cfg;
    uint32_t    src;
    uint32_t    dst;
    uint32_t    len;
    uint32_t    para;
    uint32_t    p_lln;
    struct sunxi_dma_lli *vlln;
};


#define sunxi_slave_id(d, s)    (((d)<<16) | (s))

typedef void (*dma_callback)(void *param);

/**
 * enum dma_slave_buswidth - defines bus width of the DMA slave
 * device, source or target buses
 */
enum dma_slave_buswidth {
    DMA_SLAVE_BUSWIDTH_UNDEFINED = 0,
    DMA_SLAVE_BUSWIDTH_1_BYTE = 1,
    DMA_SLAVE_BUSWIDTH_2_BYTES = 2,
    DMA_SLAVE_BUSWIDTH_3_BYTES = 3,
    DMA_SLAVE_BUSWIDTH_4_BYTES = 4,
    DMA_SLAVE_BUSWIDTH_8_BYTES = 8,
    DMA_SLAVE_BUSWIDTH_16_BYTES = 16,
    DMA_SLAVE_BUSWIDTH_32_BYTES = 32,
    DMA_SLAVE_BUSWIDTH_64_BYTES = 64,
};

enum dma_slave_burst {
    DMA_SLAVE_BURST_1 = 1,
    DMA_SLAVE_BURST_4 = 4,
    DMA_SLAVE_BURST_8 = 8,
    DMA_SLAVE_BURST_16 = 16,
};

/**
 * enum dma_transfer_direction - dma transfer mode and direction indicator
 * @DMA_MEM_TO_MEM: Async/Memcpy mode
 * @DMA_MEM_TO_DEV: Slave mode & From Memory to Device
 * @DMA_DEV_TO_MEM: Slave mode & From Device to Memory
 * @DMA_DEV_TO_DEV: Slave mode & From Device to Device
 */
enum dma_transfer_direction {
    DMA_MEM_TO_MEM = 0,
    DMA_MEM_TO_DEV = 1,
    DMA_DEV_TO_MEM = 2,
    DMA_DEV_TO_DEV = 3,
    DMA_TRANS_NONE,
};

/**
 * enum dma_status - DMA transaction status
 * @DMA_COMPLETE: transaction completed
 * @DMA_IN_PROGRESS: transaction not yet processed
 * @DMA_PAUSED: transaction is paused
 * @DMA_ERROR: transaction failed
 */
enum dma_status {
    DMA_INVALID_PARAMETER = -2,
    DMA_ERROR = -1,
    DMA_COMPLETE,
    DMA_IN_PROGRESS,
    DMA_PAUSED,
};

/**
 * struct dma_slave_config - dma slave channel runtime config
 * @direction: whether the data shall go in or out on this slave
 * channel, right now. DMA_MEM_TO_DEV and DMA_DEV_TO_MEM are
 * legal values. DEPRECATED, drivers should use the direction argument
 * to the device_prep_slave_sg and device_prep_dma_cyclic functions or
 * the dir field in the dma_interleaved_template structure.
 * @src_addr: this is the physical address where DMA slave data
 * should be read (RX), if the source is memory this argument is
 * ignored.
 * @dst_addr: this is the physical address where DMA slave data
 * should be written (TX), if the source is memory this argument
 * is ignored.
 * @src_addr_width: this is the width in bytes of the source (RX)
 * register where DMA data shall be read. If the source
 * is memory this may be ignored depending on architecture.
 * Legal values: 1, 2, 4, 8.
 * @dst_addr_width: same as src_addr_width but for destination
 * target (TX) mutatis mutandis.
 * @src_maxburst: the maximum number of words (note: words, as in
 * units of the src_addr_width member, not bytes) that can be sent
 * in one burst to the device. Typically something like half the
 * FIFO depth on I/O peripherals so you don't overflow it. This
 * may or may not be applicable on memory sources.
 * @dst_maxburst: same as src_maxburst but for destination target
 * mutatis mutandis.
 * @slave_id: Slave requester id. Only valid for slave channels. The dma
 * slave peripheral will have unique id as dma requester which need to be
 * pass as slave config.
 *
 * This struct is passed in as configuration data to a DMA engine
 * in order to set up a certain channel for DMA transport at runtime.
 * The DMA device/engine has to provide support for an additional
 * callback in the dma_device structure, device_config and this struct
 * will then be passed in as an argument to the function.
 *
 * The rationale for adding configuration information to this struct is as
 * follows: if it is likely that more than one DMA slave controllers in
 * the world will support the configuration option, then make it generic.
 * If not: if it is fixed so that it be sent in static from the platform
 * data, then prefer to do that.
 */
struct dma_slave_config {
    enum dma_transfer_direction direction;
    unsigned long src_addr;
    unsigned long dst_addr;
    enum dma_slave_buswidth src_addr_width;
    enum dma_slave_buswidth dst_addr_width;
    uint32_t src_maxburst;
    uint32_t dst_maxburst;
    uint32_t slave_id;
};

struct sunxi_dma_chan {
    uint8_t used:1;
    uint8_t chan_count:4;
    bool    cyclic:1;
    struct dma_slave_config  cfg;
    uint32_t periods_pos;
    uint32_t buf_len;
    struct sunxi_dma_lli *desc;
    uint32_t    irq_type;
    dma_callback callback;
    void *callback_param;
    /* volatile kspinlock_t lock; */
    volatile int lock;
};

/** This enum defines the DMA CHANNEL status. */
typedef enum {
    HAL_DMA_CHAN_STATUS_BUSY  = 0,              /* DMA channel status busy */
    HAL_DMA_CHAN_STATUS_FREE = 1               /* DMA channel status free */
} hal_dma_chan_status_t;

/** This enum defines the return type of GPIO API. */
typedef enum {
    HAL_DMA_STATUS_INVALID_PARAMETER    = -22,      /* Invalid input parameter. */
    HAL_DMA_STATUS_NO_MEM           = -12,      /* No memory. */
    HAL_DMA_STATUS_ERR_PERM         = -1,       /* Operation not permitted. */
    HAL_DMA_STATUS_OK           = 0     /* The DMA status ok. */
} hal_dma_status_t;


hal_dma_chan_status_t hal_dma_chan_request(struct sunxi_dma_chan **dma_chan);
hal_dma_status_t hal_dma_prep_memcpy(struct sunxi_dma_chan *chan,
                       uint32_t dest, uint32_t src, uint32_t len);
hal_dma_status_t hal_dma_prep_device(struct sunxi_dma_chan *chan,
                       uint32_t dest, uint32_t src,
                       uint32_t len, enum dma_transfer_direction dir);
hal_dma_status_t hal_dma_prep_cyclic(struct sunxi_dma_chan *chan,
                     uint32_t buf_addr, uint32_t buf_len,
                     uint32_t period_len, enum dma_transfer_direction dir);
hal_dma_status_t hal_dma_callback_install(struct sunxi_dma_chan *chan,
                      dma_callback callback,
                      void *callback_param);
hal_dma_status_t hal_dma_slave_config(struct sunxi_dma_chan *chan, struct dma_slave_config *config);
enum dma_status hal_dma_tx_status(struct sunxi_dma_chan *chan, uint32_t *left_size);
hal_dma_status_t hal_dma_start(struct sunxi_dma_chan *chan);
hal_dma_status_t hal_dma_stop(struct sunxi_dma_chan *chan);
hal_dma_status_t hal_dma_chan_free(struct sunxi_dma_chan *chan);
hal_dma_status_t hal_dma_chan_desc_free(struct sunxi_dma_chan *chan);
void hal_dma_init(void);

#ifdef __cplusplus
}
#endif

#endif