1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
|
/*
* Copyright (C) 2018 Shanghai Eastsoft Microelectronics Co., Ltd.
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2020-01-14 wangyq the first version
*/
#include <rthw.h>
#include <rtthread.h>
#include <rtdevice.h>
#include "board.h"
#include "drv_uart.h"
#include <ald_gpio.h>
#include <ald_uart.h>
#include <ald_cmu.h>
#ifdef RT_USING_SERIAL
/* es32 uart driver */
struct es32_uart
{
uart_handle_t huart;
IRQn_Type irq;
};
static rt_err_t es32f3x_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
{
gpio_init_t gpio_initstructure;
struct es32_uart *uart;
RT_ASSERT(serial != RT_NULL);
RT_ASSERT(cfg != RT_NULL);
uart = (struct es32_uart *)serial->parent.user_data;
/* Initialize tx pin */
gpio_initstructure.mode = GPIO_MODE_OUTPUT;
gpio_initstructure.odos = GPIO_PUSH_PULL;
gpio_initstructure.pupd = GPIO_PUSH_UP;
gpio_initstructure.podrv = GPIO_OUT_DRIVE_1;
gpio_initstructure.nodrv = GPIO_OUT_DRIVE_1;
gpio_initstructure.flt = GPIO_FILTER_DISABLE;
gpio_initstructure.type = GPIO_TYPE_TTL;
#ifdef BSP_USING_UART0
gpio_initstructure.func = GPIO_FUNC_3;
ald_gpio_init(GPIOB, GPIO_PIN_10, &gpio_initstructure);
/* Initialize rx pin ,the same as txpin except mode */
gpio_initstructure.mode = GPIO_MODE_INPUT;
ald_gpio_init(GPIOB, GPIO_PIN_11, &gpio_initstructure);
ald_cmu_perh_clock_config(CMU_PERH_UART0, ENABLE);
#endif /* uart0 gpio init */
#ifdef BSP_USING_UART1
gpio_initstructure.func = GPIO_FUNC_3;
ald_gpio_init(GPIOC, GPIO_PIN_10, &gpio_initstructure);
/* Initialize rx pin ,the same as txpin except mode */
gpio_initstructure.mode = GPIO_MODE_INPUT;
ald_gpio_init(GPIOC, GPIO_PIN_11, &gpio_initstructure);
ald_cmu_perh_clock_config(CMU_PERH_UART1, ENABLE);
#endif /* uart1 gpio init */
#ifdef BSP_USING_UART2
gpio_initstructure.func = GPIO_FUNC_5;
ald_gpio_init(GPIOC, GPIO_PIN_12, &gpio_initstructure);
/* Initialize rx pin ,the same as txpin except mode */
gpio_initstructure.mode = GPIO_MODE_INPUT;
ald_gpio_init(GPIOD, GPIO_PIN_2, &gpio_initstructure);
ald_cmu_perh_clock_config(CMU_PERH_UART2, ENABLE);
#endif /* uart2 gpio init */
#ifdef BSP_USING_UART3
gpio_initstructure.func = GPIO_FUNC_4;
ald_gpio_init(GPIOC, GPIO_PIN_4, &gpio_initstructure);
/* Initialize rx pin ,the same as txpin except mode */
gpio_initstructure.mode = GPIO_MODE_INPUT;
ald_gpio_init(GPIOC, GPIO_PIN_5, &gpio_initstructure);
ald_cmu_perh_clock_config(CMU_PERH_UART3, ENABLE);
#endif /* uart3 gpio init */
#ifdef BSP_USING_UART4
gpio_initstructure.func = GPIO_FUNC_3;
ald_gpio_init(GPIOB, GPIO_PIN_6, &gpio_initstructure);
/* Initialize rx pin ,the same as txpin except mode */
gpio_initstructure.mode = GPIO_MODE_INPUT;
ald_gpio_init(GPIOB, GPIO_PIN_7, &gpio_initstructure);
ald_cmu_perh_clock_config(CMU_PERH_UART4, ENABLE);
#endif /* uart4 gpio init */
#ifdef BSP_USING_UART5
gpio_initstructure.func = GPIO_FUNC_4;
ald_gpio_init(GPIOB, GPIO_PIN_9, &gpio_initstructure);
/* Initialize rx pin ,the same as txpin except mode */
gpio_initstructure.mode = GPIO_MODE_INPUT;
ald_gpio_init(GPIOB, GPIO_PIN_8, &gpio_initstructure);
ald_cmu_perh_clock_config(CMU_PERH_UART5, ENABLE);
#endif /* uart5 gpio init */
ald_uart_tx_fifo_config(&uart->huart, UART_TXFIFO_EMPTY);
ald_uart_rx_fifo_config(&uart->huart, UART_RXFIFO_1BYTE);
uart->huart.init.mode = UART_MODE_UART;
uart->huart.init.baud = cfg->baud_rate;
uart->huart.init.word_length = (uart_word_length_t)(8 - cfg->data_bits);
uart->huart.init.parity = (uart_parity_t)(cfg->parity == PARITY_EVEN ? UART_PARITY_EVEN : cfg->parity);
uart->huart.init.fctl = UART_HW_FLOW_CTL_DISABLE;
ald_uart_init(&uart->huart);
if (cfg->bit_order == BIT_ORDER_MSB)
{
UART_MSB_FIRST_ENABLE(&uart->huart);
}
else
{
UART_MSB_FIRST_DISABLE(&uart->huart);
}
if (cfg->invert == NRZ_INVERTED)
{
UART_DATA_INV_ENABLE(&uart->huart);
}
else
{
UART_DATA_INV_DISABLE(&uart->huart);
}
return RT_EOK;
}
static rt_err_t es32f3x_control(struct rt_serial_device *serial, int cmd, void *arg)
{
struct es32_uart *uart;
RT_ASSERT(serial != RT_NULL);
uart = (struct es32_uart *)serial->parent.user_data;
switch (cmd)
{
case RT_DEVICE_CTRL_CLR_INT:
/* disable rx irq */
NVIC_DisableIRQ(uart->irq);
/* disable interrupt */
ald_uart_interrupt_config(&uart->huart, UART_IT_RFTH, DISABLE);
break;
case RT_DEVICE_CTRL_SET_INT:
/* enable rx irq */
NVIC_EnableIRQ(uart->irq);
/* enable interrupt */
ald_uart_interrupt_config(&uart->huart, UART_IT_RFTH, ENABLE);
break;
}
return RT_EOK;
}
static int es32f3x_putc(struct rt_serial_device *serial, char c)
{
struct es32_uart *uart;
RT_ASSERT(serial != RT_NULL);
uart = (struct es32_uart *)serial->parent.user_data;
while (ald_uart_get_status(&uart->huart, UART_STATUS_TFEMPTY) == RESET)
;
WRITE_REG(uart->huart.perh->TXBUF, c);
return 1;
}
static int es32f3x_getc(struct rt_serial_device *serial)
{
int ch = -1;
struct es32_uart *uart;
RT_ASSERT(serial != RT_NULL);
uart = (struct es32_uart *)serial->parent.user_data;
if (ald_uart_get_status(&uart->huart, UART_STATUS_RFTH))
{
ch = (uint8_t)(uart->huart.perh->RXBUF & 0xFF);
}
return ch;
}
static const struct rt_uart_ops es32f3x_uart_ops =
{
es32f3x_configure,
es32f3x_control,
es32f3x_putc,
es32f3x_getc,
};
#ifdef BSP_USING_UART0
/* UART0 device driver structure */
struct es32_uart uart0 =
{
{UART0},
UART0_IRQn
};
struct rt_serial_device serial0;
void UART0_Handler(void)
{
/* enter interrupt */
rt_interrupt_enter();
if ((ald_uart_get_mask_flag_status(&uart0.huart, UART_IF_RFTH)) != RESET)
{
ald_uart_clear_flag_status(&uart0.huart, UART_IF_RFTH);
rt_hw_serial_isr(&serial0, RT_SERIAL_EVENT_RX_IND);
}
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* BSP_USING_UART0 */
#ifdef BSP_USING_UART1
/* UART1 device driver structure */
struct es32_uart uart1 =
{
{UART1},
UART1_IRQn
};
struct rt_serial_device serial1;
void UART1_Handler(void)
{
/* enter interrupt */
rt_interrupt_enter();
if ((ald_uart_get_mask_flag_status(&uart1.huart, UART_IF_RFTH)) != RESET)
{
ald_uart_clear_flag_status(&uart1.huart, UART_IF_RFTH);
rt_hw_serial_isr(&serial1, RT_SERIAL_EVENT_RX_IND);
}
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* BSP_USING_UART1 */
#ifdef BSP_USING_UART2
/* UART2 device driver structure */
struct es32_uart uart2 =
{
{UART2},
UART2_IRQn
};
struct rt_serial_device serial2;
void UART2_Handler(void)
{
/* enter interrupt */
rt_interrupt_enter();
if ((ald_uart_get_mask_flag_status(&uart2.huart, UART_IF_RFTH)) != RESET)
{
ald_uart_clear_flag_status(&uart2.huart, UART_IF_RFTH);
rt_hw_serial_isr(&serial2, RT_SERIAL_EVENT_RX_IND);
}
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* BSP_USING_UART2 */
#ifdef BSP_USING_UART3
/* UART3 device driver structure */
struct es32_uart uart3 =
{
{UART3},
UART3_IRQn
};
struct rt_serial_device serial3;
void UART3_Handler(void)
{
/* enter interrupt */
rt_interrupt_enter();
if ((ald_uart_get_mask_flag_status(&uart3.huart, UART_IF_RFTH)) != RESET)
{
ald_uart_clear_flag_status(&uart3.huart, UART_IF_RFTH);
rt_hw_serial_isr(&serial3, RT_SERIAL_EVENT_RX_IND);
}
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* BSP_USING_UART3 */
#ifdef BSP_USING_UART4
/* UART4 device driver structure */
struct es32_uart uart4 =
{
{UART4},
UART4_IRQn
};
struct rt_serial_device serial4;
void UART4_Handler(void)
{
/* enter interrupt */
rt_interrupt_enter();
if ((ald_uart_get_mask_flag_status(&uart4.huart, UART_IF_RFTH)) != RESET)
{
ald_uart_clear_flag_status(&uart4.huart, UART_IF_RFTH);
rt_hw_serial_isr(&serial4, RT_SERIAL_EVENT_RX_IND);
}
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* BSP_USING_UART4 */
#ifdef BSP_USING_UART5
/* UART5 device driver structure */
struct es32_uart uart5 =
{
{UART5},
UART5_IRQn
};
struct rt_serial_device serial5;
void UART5_Handler(void)
{
/* enter interrupt */
rt_interrupt_enter();
if ((ald_uart_get_mask_flag_status(&uart5.huart, UART_IF_RFTH)) != RESET)
{
ald_uart_clear_flag_status(&uart5.huart, UART_IF_RFTH);
rt_hw_serial_isr(&serial5, RT_SERIAL_EVENT_RX_IND);
}
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* BSP_USING_UART5 */
int rt_hw_uart_init(void)
{
struct es32_uart *uart;
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
#ifdef BSP_USING_UART0
uart = &uart0;
serial0.ops = &es32f3x_uart_ops;
serial0.config = config;
/* register UART0 device */
rt_hw_serial_register(&serial0, "uart0",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* BSP_USING_UART0 */
#ifdef BSP_USING_UART1
uart = &uart1;
serial1.ops = &es32f3x_uart_ops;
serial1.config = config;
/* register UART1 device */
rt_hw_serial_register(&serial1, "uart1",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* BSP_USING_UART1 */
#ifdef BSP_USING_UART2
uart = &uart2;
serial2.ops = &es32f3x_uart_ops;
serial2.config = config;
/* register UART2 device */
rt_hw_serial_register(&serial2, "uart2",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* BSP_USING_UART2 */
#ifdef BSP_USING_UART3
uart = &uart3;
serial3.ops = &es32f3x_uart_ops;
serial3.config = config;
/* register UART3 device */
rt_hw_serial_register(&serial3, "uart3",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* BSP_USING_UART3 */
#ifdef BSP_USING_UART4
uart = &uart4;
serial4.ops = &es32f3x_uart_ops;
serial4.config = config;
/* register UART4 device */
rt_hw_serial_register(&serial4, "uart4",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* BSP_USING_UART4 */
#ifdef BSP_USING_UART5
uart = &uart5;
serial5.ops = &es32f3x_uart_ops;
serial5.config = config;
/* register UART5 device */
rt_hw_serial_register(&serial5, "uart5",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* BSP_USING_UART5 */
return 0;
}
INIT_BOARD_EXPORT(rt_hw_uart_init);
#endif
|
