path: root/bsp/gd32105c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbh_int.c

/*!
    \file  usbh_int.c
    \brief USB host mode interrupt handler file

    \version 2014-12-26, V1.0.0, firmware for GD32F10x
    \version 2017-06-20, V2.0.0, firmware for GD32F10x
    \version 2018-07-31, V2.1.0, firmware for GD32F10x
*/

/*
    Copyright (c) 2018, GigaDevice Semiconductor Inc.

    All rights reserved.

    Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:

    1. Redistributions of source code must retain the above copyright notice, this
       list of conditions and the following disclaimer.
    2. Redistributions in binary form must reproduce the above copyright notice,
       this list of conditions and the following disclaimer in the documentation
       and/or other materials provided with the distribution.
    3. Neither the name of the copyright holder nor the names of its contributors
       may be used to endorse or promote products derived from this software without
       specific prior written permission.

    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/

#include "usb_core.h"
#include "usb_defines.h"
#include "usbh_int.h"

static uint32_t usbh_intf_sof                 (usb_core_handle_struct *pudev);
static uint32_t usbh_intf_port                (usb_core_handle_struct *pudev);
static uint32_t usbh_intf_hc                  (usb_core_handle_struct *pudev);
static uint32_t usbh_intf_hc_in               (usb_core_handle_struct *pudev, uint8_t channel_num);
static uint32_t usbh_intf_hc_out              (usb_core_handle_struct *pudev, uint8_t channel_num);
static uint32_t usbh_intf_rxfifo_noempty      (usb_core_handle_struct *pudev);
static uint32_t usbh_intf_nptxfifo_empty      (usb_core_handle_struct *pudev);
static uint32_t usbh_intf_ptxfifo_empty       (usb_core_handle_struct *pudev);
static uint32_t usbh_intf_disconnect          (usb_core_handle_struct *pudev);
static uint32_t usbh_intf_iso_incomplete_xfer (usb_core_handle_struct *pudev);

/*!
    \brief      handle global host interrupt
    \param[in]  pudev: pointer to usb device instance
    \param[out] none
    \retval     operation status
*/
uint32_t usbh_isr (usb_core_handle_struct *pudev)
{
    uint32_t retval = 0U;
    __IO uint32_t int_flag = 0U;

    /* check if host mode */
    if (USB_CURRENT_MODE_GET() == HOST_MODE) {
        USB_CORE_INTR_READ(int_flag);

        if (!int_flag) {
            return 0U;
        }

        /* start of frame interrupt handle */
        if (int_flag & GINTF_SOF) {
            retval |= usbh_intf_sof (pudev);
        }

        /* rx fifo non-empty interrupt handle */
        if (int_flag & GINTF_RXFNEIF) {
            retval |= usbh_intf_rxfifo_noempty (pudev);
        }

        /* non-periodic tx fifo empty interrupt hanlde */
        if (int_flag & GINTF_NPTXFEIF) {
            retval |= usbh_intf_nptxfifo_empty (pudev);
        }

        /* periodic tx fifo empty interrupt handle */
        if (int_flag & GINTF_PTXFEIF) {
            retval |= usbh_intf_ptxfifo_empty (pudev);
        }

        /* host channels interrupt handle */
        if (int_flag & GINTF_HCIF) {
            retval |= usbh_intf_hc (pudev);
        }

        /* host port interrupt handle */
        if (int_flag & GINTF_HPIF) {
            retval |= usbh_intf_port (pudev);
        }

        /* disconnect interrupt handle */
        if (int_flag & GINTF_DISCIF) {
            retval |= usbh_intf_disconnect (pudev);
        }

        /* isochronous in transfer not complete interrupt handle */
        if (int_flag & GINTF_ISOONCIF) {
            retval |= usbh_intf_iso_incomplete_xfer (pudev);
        }
    }

    return retval;
}

/*!
    \brief      handle the start-of-frame interrupt in host mode
    \param[in]  pudev: pointer to usb device instance
    \param[out] none
    \retval     operation status
*/
static uint32_t usbh_intf_sof (usb_core_handle_struct *pudev)
{
    usbh_hcd_int_fops->sof(pudev);

    /* clear interrupt */
    USB_GINTF = GINTF_SOF;

    return 1U;
}

/*!
    \brief      handle all host channels interrupt in host mode
    \param[in]  pudev: pointer to usb device instance
    \param[out] none
    \retval     operation status
*/
static uint32_t usbh_intf_hc (usb_core_handle_struct *pudev)
{
    uint8_t i = 0U;
    uint32_t retval = 0U;

    for (i = 0U; i < pudev->cfg.host_channel_num; i++) {
        if ((USB_HACHINT & HACHINT_HACHINT) & ((uint32_t)1U << i)) {
            if ((USB_HCHxCTL((uint16_t)i) & HCHCTL_EPDIR) >> 15U) {
                retval |= usbh_intf_hc_in (pudev, i);
            } else {
                retval |= usbh_intf_hc_out (pudev, i);
            }
        }
    }

    return retval;
}

/*!
    \brief      handle the disconnect interrupt
    \param[in]  pudev: pointer to usb device instance
    \param[out] none
    \retval     operation status
*/
static uint32_t usbh_intf_disconnect (usb_core_handle_struct *pudev)
{
    usbh_hcd_int_fops->device_disconnected(pudev);

    /* clear interrupt */
    USB_GINTF = GINTF_DISCIF;

    return 1U;
}

/*!
    \brief      handle the non-periodic tx fifo empty interrupt
    \param[in]  pudev: pointer to usb device instance
    \param[out] none
    \retval     operation status
*/
static uint32_t usbh_intf_nptxfifo_empty (usb_core_handle_struct *pudev)
{
    uint8_t channel_num = 0U;
    uint32_t dword_len = 0U, len = 0U;
    usb_hostchannel_struct *puhc;

    channel_num = (uint8_t)((USB_HNPTFQSTAT & HNPTFQSTAT_CNUM) >> 27U);
    puhc = &pudev->host.host_channel[channel_num];
    dword_len = (puhc->xfer_len + 3U) / 4U;

    while (((USB_HNPTFQSTAT & HNPTFQSTAT_NPTXFS) > dword_len) && (0U != puhc->xfer_len)) {
        len = (USB_HNPTFQSTAT & HNPTFQSTAT_NPTXFS) * 4U;

        if (len > puhc->xfer_len) {
            /* last packet */
            len = (uint16_t)puhc->xfer_len;

            USB_GINTEN &= ~GINTF_NPTXFEIF;

        }

        dword_len = (puhc->xfer_len + 3U) / 4U;
        usb_fifo_write (puhc->xfer_buff, channel_num, (uint16_t)len);

        puhc->xfer_buff += len;
        puhc->xfer_len -= len;
        puhc->xfer_count += len;
    }

    return 1U;
}

/*!
    \brief      handle the periodic tx fifo empty interrupt
    \param[in]  pudev: pointer to usb device instance
    \param[out] none
    \retval     operation status
*/
static uint32_t usbh_intf_ptxfifo_empty (usb_core_handle_struct *pudev)
{
    uint8_t channel_num = 0U;
    uint32_t dword_len = 0U, len = 0U;
    usb_hostchannel_struct *puhc;

    channel_num = (uint8_t)((USB_HPTFQSTAT & HPTFQSTAT_CNUM) >> 27U);
    puhc = &pudev->host.host_channel[channel_num];
    dword_len = (puhc->xfer_len + 3U) / 4U;

    while (((USB_HPTFQSTAT & HPTFQSTAT_PTXFS) > dword_len) && (0U != puhc->xfer_len)) {
        len = (USB_HPTFQSTAT & HPTFQSTAT_PTXFS) * 4U;

        if (len > puhc->xfer_len) {
            len = puhc->xfer_len;

            /* last packet */
            USB_GINTEN &= ~GINTF_PTXFEIF;
        }

        dword_len = (puhc->xfer_len + 3U) / 4U;
        usb_fifo_write (puhc->xfer_buff, channel_num, (uint16_t)len);

        puhc->xfer_buff += len;
        puhc->xfer_len -= len;
        puhc->xfer_count += len;
    }

    return 1U;
}

/*!
    \brief      handle the host port interrupt
    \param[in]  pudev: pointer to usb device instance
    \param[out] none
    \retval     operation status
*/
static uint32_t usbh_intf_port (usb_core_handle_struct *pudev)
{
    uint8_t port_speed = 0U;
    uint8_t port_reset = 0U;
    uint32_t retval = 0U;
    __IO uint32_t hostportdup = USB_HPCS;

    /* clear the interrupt bits in gintsts */
    hostportdup &= ~HPCS_PE;
    hostportdup &= ~HPCS_PCD;
    hostportdup &= ~HPCS_PEDC;

    /* port connect detected */
    if (USB_HPCS & HPCS_PCD) {
        hostportdup |= HPCS_PCD;
        usbh_hcd_int_fops->device_connected(pudev);
        retval |= 1U;
    }

    /* port enable changed */
    if (USB_HPCS & HPCS_PEDC) {
        hostportdup |= HPCS_PEDC;

        if (USB_HPCS & HPCS_PE) {
            port_speed = (uint8_t)((USB_HPCS & HPCS_PS) >> 17U);

            if (HPRT_PRTSPD_LOW_SPEED == port_speed) {
                USB_HFT = 6000U;

                if (HCTLR_6_MHZ != (USB_HCTL & HCTL_CLKSEL)) {
                    if (USB_CORE_EMBEDDED_PHY == pudev->cfg.phy_interface) {
                        USB_FSLSCLOCK_INIT(HCTLR_6_MHZ);
                    }
                    port_reset = 1U;
                }
            } else if(HPRT_PRTSPD_FULL_SPEED == port_speed) {
                USB_HFT = 48000U;

                if (HCTLR_48_MHZ != (USB_HCTL & HCTL_CLKSEL)) {
                    if (USB_CORE_EMBEDDED_PHY == pudev->cfg.phy_interface) {
                        USB_FSLSCLOCK_INIT(HCTLR_48_MHZ);
                    }
                    port_reset = 1U;
                }
            } else {
                /* for high speed device and others */
                port_reset = 1U;
            }
        }
    }

    if (port_reset) {
        usb_port_reset(pudev);
    }

    /* clear port interrupts */
    USB_HPCS = hostportdup;

    return retval;
}

/*!
    \brief      handle the out channel interrupt
    \param[in]  pudev: pointer to usb device instance
    \param[in]  channel_num: host channel number which is in (0..7)
    \param[out] none
    \retval     operation status
*/
static uint32_t usbh_intf_hc_out (usb_core_handle_struct *pudev, uint8_t channel_num)
{
    uint32_t channel_intr = USB_HCHxINTF((uint16_t)channel_num);
    usb_hostchannel_struct *puhc = &pudev->host.host_channel[channel_num];

    channel_intr &= USB_HCHxINTEN((uint16_t)channel_num);

    if (channel_intr & HCHINTF_ACK) {
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_ACK;
    } else if (channel_intr & HCHINTF_REQOVR) {
        /* handle queue overrun interrupt */
        USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE;
        usb_hostchannel_halt(pudev, channel_num);
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_REQOVR;
    } else if (channel_intr & HCHINTF_TF) {
        /* handle transfer finished interrupt */
        puhc->err_count = 0U;
        USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE;
        usb_hostchannel_halt(pudev, channel_num);
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_TF;
        puhc->status = HC_XF;
    } else if (channel_intr & HCHINTF_STALL) {
        /* handle stall */
        USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE;
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_STALL;
        usb_hostchannel_halt(pudev, channel_num);
        puhc->status = HC_STALL;
    } else if (channel_intr & HCHINTF_NAK) {
        /* handle NAK */
        puhc->err_count = 0U;
        USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE;
        usb_hostchannel_halt(pudev, channel_num);
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_NAK;
        puhc->status = HC_NAK;
    } else if (channel_intr & HCHINTF_USBER) {
        /* handle USB bus error */
        USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE;
        usb_hostchannel_halt(pudev, channel_num);
        puhc->status = HC_TRACERR;
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_USBER;
    } else if (channel_intr & HCHINTF_NYET) {
        /* handle NYET */
        puhc->err_count = 0U;
        USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE;
        usb_hostchannel_halt(pudev, channel_num);
        puhc->status = HC_NYET;
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_NYET;
    } else if (channel_intr & HCHINTF_DTER) {
        /* handle data toggle error */
        USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE;
        usb_hostchannel_halt(pudev, channel_num);
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_NAK;
        puhc->status= HC_DTGERR;
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_DTER;
    } else if (channel_intr & HCHINTF_CH) {
        /* handle channel halted */
        USB_HCHxINTEN((uint16_t)channel_num) &= ~HCHINTEN_CHIE;

        switch (puhc->status) {
            case HC_XF:
                puhc->urb_state = URB_DONE;

                if (USB_EPTYPE_BULK == ((USB_HCHxCTL((uint16_t)channel_num) & HCHCTL_EPTYPE) >> 18U)) {
                    puhc->data_tg_out ^= 1U;
                }
                break;
            case HC_NAK:
                puhc->urb_state = URB_NOTREADY;
                break;
            case HC_NYET:
                puhc->urb_state = URB_NOTREADY;
                break;
            case HC_STALL:
                puhc->urb_state = URB_STALL;
                break;
            case HC_TRACERR:
                puhc->urb_state = URB_ERROR;
                break;
            default:
                break;
        }

        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_CH;
    } else {
        /* no operation */
    }

    return 1U;
}

/*!
    \brief      handle the in channel interrupt
    \param[in]  pudev: pointer to usb device instance
    \param[in]  channel_num: host channel number which is in (0..7)
    \param[out] none
    \retval     operation status
*/
static uint32_t usbh_intf_hc_in (usb_core_handle_struct *pudev, uint8_t channel_num)
{
    uint8_t endp_type = 0U;
    usb_hostchannel_struct *puhc = &pudev->host.host_channel[channel_num];

    uint32_t channle_intf = USB_HCHxINTF((uint16_t)channel_num);
    __IO uint32_t channel_ctrl = USB_HCHxCTL((uint16_t)channel_num);

    channle_intf &= USB_HCHxINTEN((uint16_t)channel_num);

    endp_type = (uint8_t)((channel_ctrl & HCHCTL_EPTYPE) >> 18U);

    if (channle_intf & HCHINTF_ACK) {
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_ACK;
    } else if (channle_intf & HCHINTF_STALL) {
        USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE;
        puhc->status = HC_STALL;
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_NAK;
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_STALL;

        /* NOTE: When there is a 'stall', reset also nak,
           else, the pudev->host.status = HC_STALL
           will be overwritten by 'nak' in code below */
        channle_intf &= ~HCHINTF_NAK;

        usb_hostchannel_halt(pudev, channel_num);
    } else if (channle_intf & HCHINTF_DTER) {
        USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE;
        usb_hostchannel_halt(pudev, channel_num);
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_NAK;
        puhc->status = HC_DTGERR;
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_DTER;
    } else {
        /* no operation */
    }
    /* handle queue overrun interrupt */
    if (channle_intf & HCHINTF_REQOVR) {
        USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE;
        usb_hostchannel_halt(pudev, channel_num);
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_REQOVR;
    } else if (channle_intf & HCHINTF_TF) {
        /* handle transfer finished interrupt */
        puhc->status = HC_XF;
        puhc->err_count = 0U;
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_TF;

        if ((USB_EPTYPE_CTRL == endp_type) || (USB_EPTYPE_BULK == endp_type)) {
            USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE;
            usb_hostchannel_halt(pudev, channel_num);
            USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_NAK;
            puhc->data_tg_in ^= 1U;
        } else if (USB_EPTYPE_INTR == endp_type) {
            channel_ctrl |= HCHCTL_ODDFRM;
            USB_HCHxCTL((uint16_t)channel_num) = channel_ctrl;
            puhc->urb_state = URB_DONE;
        } else {
            /* no operation */
        }
    } else if (channle_intf & HCHINTF_CH) {
        /* handle channel halted */
        USB_HCHxINTEN((uint16_t)channel_num) &= ~HCHINTEN_CHIE;

        switch (puhc->status) {
            case HC_XF:
                puhc->urb_state = URB_DONE;
                break;
            case HC_TRACERR:
            case HC_DTGERR:
                puhc->err_count = 0U;
                puhc->urb_state = URB_ERROR;
                break;
            case HC_STALL:
                puhc->urb_state = URB_STALL;
                break;
            default:
                if (USB_EPTYPE_INTR == endp_type) {
                    puhc->data_tg_in ^= 1U;
                }
                break;
        }

        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_CH;
    } else if (channle_intf & HCHINTF_USBER) {
        /* handle USB bus error */
        USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE;
        puhc->status = HC_TRACERR;
        usb_hostchannel_halt(pudev, channel_num);
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_USBER;
    } else if (channle_intf & HCHINTF_NAK) {
        /* handle NAK */
        if (USB_EPTYPE_INTR == endp_type) {
            USB_HCHxINTEN((uint16_t)channel_num) |= HCHINTEN_CHIE;
            usb_hostchannel_halt(pudev, channel_num);
        }

        puhc->status = HC_NAK;
        USB_HCHxINTF((uint16_t)channel_num) = HCHINTF_NAK;

        if ((USB_EPTYPE_CTRL == endp_type) || (USB_EPTYPE_BULK == endp_type)) {
            /* re-activate the channel */
            channel_ctrl |= HCHCTL_CEN;
            channel_ctrl &= ~HCHCTL_CDIS;
            USB_HCHxCTL((uint16_t)channel_num) = channel_ctrl;
        }
    } else {
        /* no operation */
    }

    return 1U;
}

/*!
    \brief      handle the rx fifo non-empty interrupt
    \param[in]  pudev: pointer to usb device instance
    \param[out] none
    \retval     operation status
*/
static uint32_t usbh_intf_rxfifo_noempty (usb_core_handle_struct *pudev)
{
    uint32_t count = 0U;
    __IO uint8_t channel_num = 0U;
    __IO uint32_t rx_status = 0U;
    uint32_t usbh_ch_ctl_reg = 0U;
    usb_hostchannel_struct *puhc;

    /* disable the rx status queue level interrupt */
    USB_GINTEN &= ~GINTF_RXFNEIF;

    rx_status = USB_GRSTATP;
    channel_num = (uint8_t)(rx_status & GRSTATRP_CNUM);
    puhc = &pudev->host.host_channel[channel_num];

    switch ((rx_status & GRSTATRP_RPCKST) >> 17) {
        case GRSTATR_RPCKST_IN:
            count = (rx_status & GRSTATRP_BCOUNT) >> 4;

            /* read the data into the host buffer. */
            if ((count > 0U) && (puhc->xfer_buff != (void *)0)) {
                usb_fifo_read(puhc->xfer_buff, (uint16_t)count);

                /* manage multiple Xfer */
                puhc->xfer_buff += count;
                puhc->xfer_count += count;

                if (USB_HCHxLEN((uint16_t)channel_num) & HCHLEN_PCNT) {
                    /* re-activate the channel when more packets are expected */
                    usbh_ch_ctl_reg = USB_HCHxCTL((uint16_t)channel_num);
                    usbh_ch_ctl_reg |= HCHCTL_CEN;
                    usbh_ch_ctl_reg &= ~HCHCTL_CDIS;
                    USB_HCHxCTL((uint16_t)channel_num) = usbh_ch_ctl_reg;
                }
            }
            break;
        case GRSTATR_RPCKST_IN_XFER_COMP:
            break;
        case GRSTATR_RPCKST_DATA_TOGGLE_ERR:
            count = (rx_status & GRSTATRP_BCOUNT) >> 4;
            while (count > 0) {
                rx_status = USB_GRSTATP;
                count--;
            }
            break;
        case GRSTATR_RPCKST_CH_HALTED:
        default:
            break;
    }

    /* enable the rx status queue level interrupt */
    USB_GINTEN |= GINTF_RXFNEIF;

    return 1U;
}

/*!
    \brief      handle the incomplete periodic transfer interrupt
    \param[in]  pudev: pointer to usb device instance
    \param[out] none
    \retval     operation status
*/
static uint32_t usbh_intf_iso_incomplete_xfer (usb_core_handle_struct *pudev)
{
    __IO uint32_t gint_flag = 0U;

    gint_flag = USB_HCHxCTL(0U);
    USB_HCHxCTL(0U) = 0U;

    gint_flag = 0U;

    /* clear interrupt */
    gint_flag |= GINTF_ISOONCIF;
    USB_GINTF = gint_flag;

    return 1U;
}