path: root/bsp/gd32107c-eval/Libraries/GD32F10x_usbfs_driver/Source/usbh_ctrl.c

/*!
    \file  usbh_ctrl.c
    \brief this file implements the functions for the control transmit process

    \version 2014-12-26, V1.0.0, firmware for GD32F10x
    \version 2017-06-20, V2.0.0, firmware for GD32F10x
    \version 2018-07-31, V2.1.0, firmware for GD32F10x
*/

/*
    Copyright (c) 2018, GigaDevice Semiconductor Inc.

    All rights reserved.

    Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:

    1. Redistributions of source code must retain the above copyright notice, this
       list of conditions and the following disclaimer.
    2. Redistributions in binary form must reproduce the above copyright notice,
       this list of conditions and the following disclaimer in the documentation
       and/or other materials provided with the distribution.
    3. Neither the name of the copyright holder nor the names of its contributors
       may be used to endorse or promote products derived from this software without
       specific prior written permission.

    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/

#include "usbh_core.h"
#include "usbh_std.h"
#include "usbh_ctrl.h"

uint8_t ctrl_polling_handle_flag = 0U;
uint8_t ctrl_setup_wait_flag = 0U;
uint8_t ctrl_data_wait_flag = 0U;
uint8_t ctrl_status_wait_flag = 0U;

static uint16_t timeout = 0U;

static void ctrl_idle_handle      (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate);
static void ctrl_setup_handle     (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate);
static void ctrl_data_handle      (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate);
static void ctrl_status_handle    (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate);
static void ctrl_error_handle     (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate);
static void ctrl_stalled_handle   (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate);
static void ctrl_complete_handle  (usb_core_handle_struct *pudev, usbh_host_struct *puhost, usbh_state_handle_struct *pustate);

/* the ctrl state handle function array */
void (*ctrl_state_handle[]) (usb_core_handle_struct *pudev,
                             usbh_host_struct *puhost,
                             usbh_state_handle_struct *pustate) =
{
    ctrl_idle_handle,
    ctrl_setup_handle,
    ctrl_data_handle,
    ctrl_status_handle,
    ctrl_error_handle,
    ctrl_stalled_handle,
    ctrl_complete_handle,
};

/* the ctrl state handle table */
state_table_struct ctrl_handle_table[CTRL_HANDLE_TABLE_SIZE] =
{
    /* the current state   the current event           the next state        the event function */
    {CTRL_IDLE,            CTRL_EVENT_SETUP,           CTRL_SETUP,           only_state_move     },
    {CTRL_SETUP,           CTRL_EVENT_DATA,            CTRL_DATA,            only_state_move     },
    {CTRL_SETUP,           CTRL_EVENT_STATUS,          CTRL_STATUS,          only_state_move     },
    {CTRL_SETUP,           CTRL_EVENT_ERROR,           CTRL_ERROR,           only_state_move     },
    {CTRL_DATA,            CTRL_EVENT_STATUS,          CTRL_STATUS,          only_state_move     },
    {CTRL_DATA,            CTRL_EVENT_ERROR,           CTRL_ERROR,           only_state_move     },
    {CTRL_DATA,            CTRL_EVENT_STALLED,         CTRL_STALLED,         only_state_move     },
    {CTRL_STATUS,          CTRL_EVENT_COMPLETE,        CTRL_COMPLETE,        only_state_move     },
    {CTRL_STATUS,          CTRL_EVENT_ERROR,           CTRL_ERROR,           only_state_move     },
    {CTRL_STATUS,          CTRL_EVENT_STALLED,         CTRL_STALLED,         only_state_move     },
    {CTRL_ERROR,           GO_TO_UP_STATE_EVENT,       UP_STATE,             goto_up_state_fun   },
    {CTRL_STALLED,         GO_TO_UP_STATE_EVENT,       UP_STATE,             goto_up_state_fun   },
    {CTRL_COMPLETE,        GO_TO_UP_STATE_EVENT,       UP_STATE,             goto_up_state_fun   },
};

/*!
    \brief      the polling function of CTRL state
    \param[in]  pudev: pointer to usb device
    \param[in]  puhost: pointer to usb host
    \param[in]  pustate: pointer to usb state driver
    \param[out] none
    \retval     none
*/
usbh_status_enum ctrl_state_polling_fun (usb_core_handle_struct *pudev,
                                         usbh_host_struct *puhost,
                                         void *pustate)
{
    usbh_status_enum exe_state = USBH_BUSY;
    usbh_state_handle_struct *p_state;

    p_state = (usbh_state_handle_struct *)pustate;

    /* if first enter this function, begin the ctrl state */
    if (0U == ctrl_polling_handle_flag) {
        ctrl_polling_handle_flag = 1U;
        scd_table_push(p_state);
        scd_state_move(p_state, CTRL_IDLE);
    }

    /* base on the current state to handle the ctrl state */
    scd_begin(p_state, CTRL_FSM_ID);
    ctrl_state_handle[p_state->usbh_current_state](pudev, puhost, p_state);

    /* determine the control transfer whether to complete */
    switch (puhost->usbh_backup_state.ctrl_backup_state) {
        case CTRL_COMPLETE:
            ctrl_polling_handle_flag = 0U;
            puhost->usbh_backup_state.ctrl_backup_state = CTRL_IDLE;
            exe_state = USBH_OK;
            break;
        case CTRL_STALLED:
            ctrl_polling_handle_flag = 0U;
            puhost->usbh_backup_state.ctrl_backup_state = CTRL_IDLE;
            exe_state = USBH_NOT_SUPPORTED;
            break;
        case CTRL_ERROR:
            ctrl_polling_handle_flag = 0U;
            puhost->usbh_backup_state.ctrl_backup_state = CTRL_IDLE;
            exe_state = USBH_FAIL;
            break;
        default:
            exe_state = USBH_BUSY;
            break;
    }

    return exe_state;
}

/*!
    \brief      the handle function of CTRL_IDLE state
    \param[in]  pudev: pointer to usb device
    \param[in]  puhost: pointer to usb host
    \param[in]  pustate: pointer to usb state driver
    \param[out] none
    \retval     none
*/
static void ctrl_idle_handle (usb_core_handle_struct *pudev,
                              usbh_host_struct *puhost,
                              usbh_state_handle_struct *pustate)
{
    puhost->usbh_backup_state.ctrl_backup_state = CTRL_IDLE;
    scd_event_handle(pudev, puhost, pustate, CTRL_EVENT_SETUP, pustate->usbh_current_state);
}

/*!
    \brief      the handle function of CTRL_SETUP state
    \param[in]  pudev: pointer to usb device
    \param[in]  puhost: pointer to usb host
    \param[in]  pustate: pointer to usb state driver
    \param[out] none
    \retval     none
*/
static void ctrl_setup_handle (usb_core_handle_struct *pudev,
                               usbh_host_struct *puhost,
                               usbh_state_handle_struct *pustate)
{
    urb_state_enum urb_status = URB_IDLE;
    puhost->usbh_backup_state.ctrl_backup_state = CTRL_SETUP;

    if (0U == ctrl_setup_wait_flag) {
        ctrl_setup_wait_flag = 1U;

        /* send a setup packet */
        usbh_ctltx_setup (pudev,
                          puhost->control.setup.data,
                          puhost->control.hc_out_num);
    } else {
        urb_status = hcd_urb_state_get(pudev, puhost->control.hc_out_num);

        /* case setup packet sent successfully */
        if (URB_DONE == urb_status) {
            /* check if there is a data stage */
            if (0U != puhost->control.setup.b.wLength) {
                ctrl_setup_wait_flag = 0U;
                timeout = DATA_STAGE_TIMEOUT;
                scd_event_handle(pudev, puhost, pustate, CTRL_EVENT_DATA, pustate->usbh_current_state);
            /* no data stage */
            } else {
                timeout = NODATA_STAGE_TIMEOUT;
                ctrl_setup_wait_flag = 0U;
                scd_event_handle(pudev,
                                 puhost,
                                 pustate,
                                 CTRL_EVENT_STATUS,
                                 pustate->usbh_current_state);
            }

            /* set the delay timer to enable timeout for data stage completion */
            puhost->control.timer = (uint16_t)USB_CURRENT_FRAME_GET();
        } else if (URB_ERROR == urb_status) {
            ctrl_setup_wait_flag = 0U;
            scd_event_handle(pudev, puhost, pustate, CTRL_EVENT_ERROR, pustate->usbh_current_state);
        } else {
            /* no operation */
        }
    }
}

/*!
    \brief      the handle function of CTRL_DATA state
    \param[in]  pudev: pointer to usb device
    \param[in]  puhost: pointer to usb host
    \param[in]  pustate: pointer to usb state driver
    \param[out] none
    \retval     none
*/
static void ctrl_data_handle (usb_core_handle_struct *pudev,
                              usbh_host_struct *puhost,
                              usbh_state_handle_struct *pustate)
{
    uint8_t direction;
    urb_state_enum urb_status = URB_IDLE;
    puhost->usbh_backup_state.ctrl_backup_state = CTRL_DATA;

    direction = (puhost->control.setup.b.bmRequestType & USB_DIR_MASK);

    if (USB_DIR_IN == direction) {
        if (0U == ctrl_data_wait_flag) {
            ctrl_data_wait_flag = 1U;

            /* issue an IN token */
            usbh_xfer(pudev,
                      puhost->control.buff,
                      puhost->control.hc_in_num,
                      puhost->control.length);
        } else {
            urb_status = hcd_urb_state_get(pudev, puhost->control.hc_in_num);

            /* check is data packet transfered successfully */
            switch (urb_status) {
                case URB_DONE:
                    ctrl_data_wait_flag = 0U;

                    scd_event_handle(pudev,
                                     puhost,
                                     pustate,
                                     CTRL_EVENT_STATUS,
                                     pustate->usbh_current_state);
                    break;
                case URB_STALL:
                    ctrl_data_wait_flag = 0U;

                    scd_event_handle(pudev,
                                     puhost,
                                     pustate,
                                     CTRL_EVENT_STALLED,
                                     pustate->usbh_current_state);
                    break;
                case URB_ERROR:
                    ctrl_data_wait_flag = 0U;

                    /* device error */
                    scd_event_handle(pudev,
                                     puhost,
                                     pustate,
                                     CTRL_EVENT_ERROR,
                                     pustate->usbh_current_state);
                    break;
                default:
                    if (((uint16_t)USB_CURRENT_FRAME_GET() - puhost->control.timer) > timeout) {
                        ctrl_data_wait_flag = 0U;

                        /* timeout for in transfer */
                        scd_event_handle(pudev,
                                         puhost,
                                         pustate,
                                         CTRL_EVENT_ERROR,
                                         pustate->usbh_current_state);
                    }
                    break;
            }
        }
    } else {
        if (0U == ctrl_data_wait_flag) {
            ctrl_data_wait_flag = 1U;

            /* start data out transfer (only one data packet)*/
            pudev->host.host_channel[puhost->control.hc_out_num].data_tg_out = 1U;

            usbh_xfer(pudev,
                      puhost->control.buff,
                      puhost->control.hc_out_num,
                      puhost->control.length);
        } else {
            urb_status = hcd_urb_state_get(pudev, puhost->control.hc_out_num);

            switch (urb_status) {
                case URB_DONE:
                    ctrl_data_wait_flag = 0U;

                    /* if the setup pkt is sent successful, then change the state */
                    scd_event_handle(pudev,
                                     puhost,
                                     pustate,
                                     CTRL_EVENT_STATUS,
                                     pustate->usbh_current_state);
                    break;
                case URB_STALL:
                    ctrl_data_wait_flag = 0U;

                    scd_event_handle(pudev,
                                     puhost,
                                     pustate,
                                     CTRL_EVENT_STALLED,
                                     pustate->usbh_current_state);
                    break;
                case URB_NOTREADY:
                    /* nack received from device */
                    ctrl_data_wait_flag = 0U;
                    break;
                case URB_ERROR:
                    ctrl_data_wait_flag = 0U;

                    /* device error */
                    scd_event_handle(pudev,
                                     puhost,
                                     pustate,
                                     CTRL_EVENT_ERROR,
                                     pustate->usbh_current_state);
                    break;
                default:
                    break;
            }
        }
    }
}

/*!
    \brief      the handle function of CTRL_STATUS state
    \param[in]  pudev: pointer to usb device
    \param[in]  puhost: pointer to usb host
    \param[in]  pustate: pointer to usb state driver
    \param[out] none
    \retval     none
*/
static void ctrl_status_handle (usb_core_handle_struct *pudev,
                                usbh_host_struct *puhost,
                                usbh_state_handle_struct *pustate)
{
    uint8_t direction;
    urb_state_enum urb_status = URB_IDLE;

    puhost->usbh_backup_state.ctrl_backup_state = CTRL_STATUS;

    /* get the transfer direction in the data state, but the transfer direction in the status state is opposite */
    direction = (puhost->control.setup.b.bmRequestType & USB_DIR_MASK);

    if (USB_DIR_OUT == direction) {
        /* handle status in */
        if (0U == ctrl_status_wait_flag) {
            ctrl_status_wait_flag = 1U;
            usbh_xfer (pudev, 0U, puhost->control.hc_in_num, 0U);
        } else {
            urb_status = hcd_urb_state_get(pudev, puhost->control.hc_in_num);

            switch (urb_status) {
                case URB_DONE:
                    ctrl_status_wait_flag = 0U;

                    /* handle URB_DONE status */
                    scd_event_handle(pudev,
                                     puhost,
                                     pustate,
                                     CTRL_EVENT_COMPLETE,
                                     pustate->usbh_current_state);
                    break;
                case URB_ERROR:
                    ctrl_status_wait_flag = 0U;

                    /* handle URB_STALL status*/
                    scd_event_handle(pudev,
                                     puhost,
                                     pustate,
                                     CTRL_EVENT_ERROR,
                                     pustate->usbh_current_state);
                    break;
                case URB_STALL:
                    ctrl_status_wait_flag = 0U;

                    /* handle URB_STALL status */
                    scd_event_handle(pudev,
                                     puhost,
                                     pustate,
                                     CTRL_EVENT_STALLED,
                                     pustate->usbh_current_state);
                    break;
                default:
                    if (((uint16_t)USB_CURRENT_FRAME_GET() - puhost->control.timer) > timeout) {
                        ctrl_status_wait_flag = 0U;

                        /* handle timeout */
                        scd_event_handle(pudev,
                                         puhost,
                                         pustate,
                                         CTRL_EVENT_ERROR,
                                         pustate->usbh_current_state);
                    }
                    break;
            }
        }
    } else {
        /* handle status out */
        if (0U == ctrl_status_wait_flag) {
            ctrl_status_wait_flag = 1U;
            pudev->host.host_channel[puhost->control.hc_out_num].data_tg_out ^= 1U;
            usbh_xfer (pudev, 0U, puhost->control.hc_out_num, 0U);
        } else {
            urb_status = hcd_urb_state_get(pudev, puhost->control.hc_out_num);

            switch (urb_status) {
                case URB_DONE:
                    ctrl_status_wait_flag = 0U;

                    /* handle URB_DONE status */
                    scd_event_handle(pudev,
                                     puhost,
                                     pustate,
                                     CTRL_EVENT_COMPLETE,
                                     pustate->usbh_current_state);
                    break;
                case URB_NOTREADY:
                    /* handle URB_NOTREADY status */
                    ctrl_status_wait_flag = 0U;
                    break;
                case URB_ERROR:
                    ctrl_status_wait_flag = 0U;

                    /* handle URB_ERROR status */
                    scd_event_handle(pudev,
                                     puhost,
                                     pustate,
                                     CTRL_EVENT_ERROR,
                                     pustate->usbh_current_state);
                    break;
                default:
                    break;
            }
        }
    }
}

/*!
    \brief      the handle function of CTRL_ERROR state
    \param[in]  pudev: pointer to usb device
    \param[in]  puhost: pointer to usb host
    \param[in]  pustate: pointer to usb state driver
    \param[out] none
    \retval     none
*/
static void ctrl_error_handle (usb_core_handle_struct *pudev,
                               usbh_host_struct *puhost,
                               usbh_state_handle_struct *pustate)
{
    puhost->usbh_backup_state.ctrl_backup_state = CTRL_ERROR;

    if (++puhost->control.error_count <= USBH_MAX_ERROR_COUNT) {
        /* do the transmission again, starting from setup packet */
        scd_event_handle(pudev, puhost, pustate, CTRL_EVENT_SETUP, pustate->usbh_current_state);
    } else {
        scd_event_handle(pudev, puhost, pustate, GO_TO_UP_STATE_EVENT, pustate->usbh_current_state);
    }
}

/*!
    \brief      the handle function of CTRL_STALLED state
    \param[in]  pudev: pointer to usb device
    \param[in]  puhost: pointer to usb host
    \param[in]  pustate: pointer to usb state driver
    \param[out] none
    \retval     none
*/
static void ctrl_stalled_handle (usb_core_handle_struct *pudev,
                                 usbh_host_struct *puhost,
                                 usbh_state_handle_struct *pustate)
{
    puhost->usbh_backup_state.ctrl_backup_state = CTRL_STALLED;
    scd_event_handle(pudev, puhost, pustate, GO_TO_UP_STATE_EVENT, pustate->usbh_current_state);
}

/*!
    \brief      the handle function of CTRL_COMPLETE state
    \param[in]  pudev: pointer to usb device
    \param[in]  puhost: pointer to usb host
    \param[in]  pustate: pointer to usb state driver
    \param[out] none
    \retval     none
*/
static void ctrl_complete_handle (usb_core_handle_struct *pudev,
                                  usbh_host_struct *puhost,
                                  usbh_state_handle_struct *pustate)
{
    puhost->usbh_backup_state.ctrl_backup_state = CTRL_COMPLETE;
    scd_event_handle(pudev, puhost, pustate, GO_TO_UP_STATE_EVENT, pustate->usbh_current_state);
}

/*!
    \brief      send datas from the host channel
    \param[in]  pudev: pointer to usb device
    \param[in]  buf: data buffer address to send datas
    \param[in]  hc_num: the number of the host channel
    \param[in]  len: length of the send data
    \param[out] none
    \retval     host operation status
*/
usbh_status_enum usbh_xfer (usb_core_handle_struct *pudev,
                       uint8_t *buf,
                       uint8_t  hc_num,
                       uint16_t len)
{
    usb_hostchannel_struct *puhc = &pudev->host.host_channel[hc_num];

    puhc->xfer_buff = buf;
    puhc->xfer_len = len;

    switch (puhc->endp_type) {
        case USB_EPTYPE_CTRL:
            if (0U == puhc->endp_in) {
                if (0U == len) {
                    /* for status out stage, length = 0, status out pid = 1 */
                    puhc->data_tg_out = 1U;
                }

                /* set the data toggle bit as per the flag */
                if (0U == puhc->data_tg_out) {
                    /* put the pid 0 */
                    puhc->DPID = HC_PID_DATA0;
                } else {
                    /* put the pid 1 */
                    puhc->DPID = HC_PID_DATA1;
                }
            } else {
                puhc->DPID = HC_PID_DATA1;
            }
            break;

        case USB_EPTYPE_ISOC:
            puhc->DPID = HC_PID_DATA0;
            break;

        case USB_EPTYPE_BULK:
            if (0U == puhc->endp_in) {
                /* set the data toggle bit as per the flag */
                if (0U == puhc->data_tg_out) {
                    /* put the pid 0 */
                    puhc->DPID = HC_PID_DATA0;
                } else {
                    /* put the pid 1 */
                    puhc->DPID = HC_PID_DATA1;
                }
            } else {
                if (0U == puhc->data_tg_in) {
                    puhc->DPID = HC_PID_DATA0;
                } else {
                    puhc->DPID = HC_PID_DATA1;
                }
            }
            break;

        case USB_EPTYPE_INTR:
            if (0U == puhc->endp_in) {
                if (0U == puhc->data_tg_out) {
                    puhc->DPID = HC_PID_DATA0;
                } else {
                    puhc->DPID = HC_PID_DATA1;
                }

                /* toggle data pid */
                puhc->data_tg_out ^= 1U;
            } else {
                if (0U == puhc->data_tg_in) {
                    puhc->DPID = HC_PID_DATA0;
                } else {
                    puhc->DPID = HC_PID_DATA1;
                }

                /* toggle data pid */
                puhc->data_tg_in ^= 1U;
            }
            break;

        default:
            break;
    }

    hcd_submit_request (pudev, hc_num);

    return USBH_OK;
}

/*!
    \brief      send the setup packet to the device
    \param[in]  pudev: pointer to usb device
    \param[in]  buf: buffer pointer from which the data will be send to device
    \param[in]  hc_num: host channel number
    \param[out] none
    \retval     host operation status
*/
usbh_status_enum usbh_ctltx_setup (usb_core_handle_struct *pudev, uint8_t *buf, uint8_t  hc_num)
{
    usb_hostchannel_struct *puhc = &pudev->host.host_channel[hc_num];

    puhc->DPID = HC_PID_SETUP;
    puhc->xfer_buff = buf;
    puhc->xfer_len = USBH_SETUP_PACKET_SIZE;

    return (usbh_status_enum)hcd_submit_request (pudev, hc_num);
}

/*!
    \brief      this function prepare a hc and start a transfer
    \param[in]  pudev: pointer to usb device
    \param[in]  channel_num: host channel number which is in (0..7)
    \param[out] none
    \retval     host operation status
*/
uint32_t hcd_submit_request (usb_core_handle_struct *pudev, uint8_t channel_num)
{
    usb_hostchannel_struct *puhc = &pudev->host.host_channel[channel_num];

    puhc->urb_state = URB_IDLE;
    puhc->xfer_count = 0U;

    return (uint32_t)usb_hostchannel_startxfer(pudev, channel_num);
}