path: root/bsp/hc32/libraries/hc32f4a0_ddl/ChangeLog.md

# Update History
------
## V2.2.0  Sep 30, 2023
#### documents
#### drivers
- ##### bsp/components
  - **nt35510**
    - Optimize function arguments
- ##### bsp/ev_hc32f4a0_lqfp176
  - Fix some typo: KYESCAN -> KEYSCAN
  - Add API BSP_XTAL32_Init()
  - Optimize function BSP_I2C_Init()
  - Add include file named hc32_ll_fcm.h and add declaration of BSP_XTAL32_Init()
  - Modify DMC timing for EXCLK frequency 60MHz -> 30MHz
  - Modify SMC timing parameter: EXCLK 60MHz -> 30MHz
  - Optimize comments
  - Change Reset control pin from NMOS to CMOS output cause of "EV_F4A0_LQ176_Rev1.0"'s modification
  - Rename local variables: stcTca9539Config -> m_stcTca9539Config
  - Modify the IO properties of SPI
  - Modify for MISRAC2012
  - Modify SPI clock divide factor from DIV4 to DIV64
  - Modify 'BSP_SPI_TIMEOUT' to HCLK_VALUE
  - Rename local variables: stcWm8731Config -> m_stcWm8731Config
- ##### cmsis/Device
  - Modify headfile based on reference manual Rev1.3
- ##### hc32_ll_driver
  - **generic**
    - Modify version as 2.2.0
    - Modify typo
    - Add __NO_OPTIMIZE configuration item
    - Add attribute for __RAM_FUNC definition
  - **interrupts_share**
    - Modify typo
    - IRQxxx_Handler add __DSB for Arm Errata 838869
    - The BCSTR register of TimerA is split into BCSTRH and BCSTRL
    - Modify for head file update: EIRQFR -> EIFR
  - **adc**
    - Modify typo
    - API fixed: ADC_DeInit()
  - **aes**
    - Add API AES_DeInit()
  - **aos**
    - Modify for new head file
  - **can**
    - Added 3 APIs for local-reset
    - Modify typo
    - Added 3 APIs for local-reset.Refine local function CAN_ReadRxBuf(), CAN_WriteTxBuf()
  - **clk**
    - Modify typo
    - Modify CLK_SetUSBClockSrc(), add delay after configure USB clock
    - Modify API CLK_Xtal32Cmd(), CLK_MrcCmd() and CLK_LrcCmd(), use DDL_DelayUS() to replace CLK_Delay()
  - **cmp**
    - Modify typo
    - Add assert for CIEN bit in GetCmpFuncStatusAndDisFunc function
    - Remove redundant code in function CMP_WindowModeInit
  - **crc**
    - Reconstruct interface function relate to calculate CRC
    - Modify return type of function CRC_DeInit
    - Modify comment
    - Delete and modify some of group/function relate to calculate CRC
    - Optimize CRC_DeInit function
    - Modify typo
  - **ctc**
    - Modify typo
    - Modify the init assignment of i32Ret in CTC_DeInit()
  - **dac**
    - Refine definition of dac resolution
    - Modify API DAC_DeInit
    - Refine data validation
    - Modify function:DAC_DeInit
  - **dbgc**
    - Add hc32_ll_dbgc driver
  - **dcu**
    - Modify typo
    - Delete macro definition: DCU_INT_SAWTOOTH_WAVE_RELOAD
    - Modify macro-definition according to RM:DCU_CTL_COMP_TRG->DCU_CTL_COMPTRG
    - Modify API DCU_DeInit()
    - Modify function DCU_IntCmd() for misra
  - **dma**
    - Add API DMA_SetDataWidth()
    - Modify typo
    - Modify blocksize assert, 1024U is valid
    - Optimize set blocksize & repeat count process
  - **dmc**
    - Modify typo
  - **dvp**
    - Modify typo
    - Add function: DVP_GetCaptureState
  - **efm**
    - Add FLASH security addr define
    - Modify API EFM_OTP_Lock()
    - Modify API EFM_Program()
    - Modify assert IS_EFM_ADDR() range
    - Modify typo
    - Modify API EFM_WriteSecurityCode(), switch to read_only mode before exit
    - Use FNWPRT_REG to replace CM_EFM->F0NWPRT0
    - Remove address assert from EFM_ReadByte()
    - Refine EFM_SequenceProgram() & EFM_ChipErase(), and put them in RAM
  - **emb**
    - Update EMB_CTL1_CMPEN0~3 to EMB_CTL1_CMPEN1~4
    - Update EMB_INTEN_PORTINTEN to EMB_INTEN_PORTININTEN
    - Function EMB_TMR4_Init don't call EMB_DeInit
    - Function EMB_TMR6_Init don't call EMB_DeInit
    - Function EMB_DeInit set register EMB_RLSSEL to reset value
  - **eth**
    - Modify typo
    - Add ETH_MAC_SetInterface function
    - Optimize ETH start and stop timing
    - Modify the process of obtaining PHY status
    - Modify the process of auto-negotiation disable
    - Modify ETH_PTP_UpdateBasicAddend function
    - Modify the clock division of SMIC
    - Modify operation sequence of ETH_DeInit function
  - **event_port**
    - Modify typo
    - Modify for new head file
  - **fcg**
    - Modify for head file update: PWC_FCG3_CMP1->PWC_FCG3_CMP12, PWC_FCG3_CMP2->PWC_FCG3_CMP34
  - **fcm**
    - Modify API FCM_DeInit()
  - **fmac**
    - Modify API FMAC_DeInit()
  - **gpio**
    - Rename GPIO_ExIntCmd() as GPIO_ExtIntCmd
    - Modify GPIO_SetFunc()
    - Optimize API: GPIO_Init(), GPIO_SetFunc(), GPIO_SubFuncCmd(), GPIO_InputMOSCmd(), GPIO_AnalogCmd(), GPIO_ExtIntCmd()
  - **hash**
    - Add HASH_DeInit function
  - **hrpwm**
    - Modify typo
  - **i2c**
    - Modify typo
    - Move macro define I2C_SRC_CLK to head file
    - Disable slave address function in I2C_Init()
  - **i2s**
    - Modify I2S_ClearStatus function
  - **interrupts**
    - IRQxxx_Handler add __DSB for Arm Errata 838869
    - Modify micro define EIRQCFR_REG and EIRQFR_REG base RM
    - Remove space line
  - **keyscan**
    - Add function KEYSCAN_DeInit
  - **mau**
    - Add API MAU_DeInit()
  - **mpu**
    - Modify typo
    - Optimize MPU_ClearStatus function
  - **nfc**
    - Modify typo
    - Add API function: EXMC_NFC_Read/EXMC_NFC_Write
    - Typo: featrue -> feature; regsiter, Regster -> register
    - Modify macro: EXMC_NFC_4BIT_ECCS -> EXMC_NFC_4BIT_ECC
    - Change function attributes from local to global: EXMC_NFC_Read/EXMC_NFC_Write
  - **ots**
    - Modify typo
    - Modify API OTS_DeInit()
  - **pwc**
    - Modify group PWC_Stop_Type
    - Add function PWC_LVD_DeInit
    - Modify the PWC_LVD_Detection_Voltage_Sel comment
    - Modify typo
    - Add api PWC_LVD_DeInit()
    - Modify API PWC_STOP_Enter() & add assert IS_PWC_STOP_TYPE()
  - **qspi**
    - Modify return value type of QSPI_DeInit function
    - Optimize QSPI_ClearStatus function
  - **rmu**
    - Use IS_RMU_UNLOCKED() to assert
  - **rtc**
    - Modify typo
  - **sdioc**
    - Modify typo
    - Rename function SDMMC_ACMD41_SendOperatCond to SDMMC_ACMD41_SendOperateCond
    - Rename function SDMMC_CMD1_SendOperatCond to SDMMC_CMD1_SendOperateCond
    - Support CMD5/CMD52/CMD53
    - Rename macro definition SDIOC_ACMD52_RW_DIRECT to SDIOC_CMD52_IO_RW_DIRECT
    - Rename macro definition SDIOC_ACMD53_RW_EXTENDED to SDIOC_CMD53_IO_RW_EXTENDED
    - Modify response type of MMC CMD3
    - Optimize SDIOC_GetMode function
  - **smc**
    - API EXMC_SMC_DeInit add return value
    - Function EXMC_SMC_DeInit add return value
  - **spi**
    - Add SPI_SetSckPolarity,SPI_SetSckPhase functions
    - Add group SPI_SCK_Polarity_Define, SPI_SCK_Phase_Define
    - Modify return type of fuction SPI_DeInit
    - Modify SPI_GetStatus,SPI_TxRx,SPI_Tx function
  - **sram**
    - Modify typo
    - API fixed: SRAM_ClearStatus()
    - API fixed: SRAM_SetWaitCycle()
  - **swdt**
    - Optimize SWDT_ClearStatus function timeout
  - **tmr0**
    - Modify typo
  - **tmr2**
    - Modify typo
  - **tmr4**
    - Add the macros group @ref TMR4_OC_Output_Polarity
    - Modify typo
    - TMR4_OC_Buffer_Object group add macro-definition: TMR4_OC_BUF_NONE
    - Modify API TMR4_DeInit
    - Fix spell error about "response" that in function name
    - Add function comments: macros group @ref TMR4_OC_Channel
    - Modify function return value comments: TMR4_OC_GetPolarity
    - Modify function parameter comments: TMR4_PWM_SetPolarity
    - Modify function: TMR4_DeInit, TMR4_OC_DeInit, TMR4_PWM_DeInit, TMR4_EVT_DeInit
    - Modify macro-definition: IS_TMR4_OC_BUF_OBJECT
    - Fix magic number of function:  TMR4_OC_StructInit
    - Modify fuction:TMR4_PWM_Init
    - Modify comment
  - **tmr6**
    - Delete union in stc_tmr6_init_t structure
    - Modify macro define for group TMR6_Emb_Ch_Define
    - Add macro define for TMR6_Count_Dir_Status_Define
    - Modify typo
    - Modify API TMR6_GetCountDir()
  - **tmra**
    - Modify typo
    - Update about split 16bit register TMRA_BCSTR into two 8bit registers TMRA_BCSTRH and TMRA_BCSTRL
    - Delete union in stc_tmra_init_t structure
    - Modify some of member type of struct stc_tmra_init_t and relate fuction about these member
    - Modify macro-definition value for group TMRA_Interrupt_Type/TMRA_Status_Flag
    - Rename marco definition IS_TMRA_CMPVAL_BUF_COND to IS_TMRA_BUF_TRANS_COND
  - **trng**
    - Add TRNG_Cmd,TRNG_DeInit functions
    - API optimized for better random numbers: TRNG_GenerateRandom()
    - API fixed: rewrite TRNG_GenerateRandom() to Support get multiple random data
    - API optimized for better random numbers: TRNG_GenerateRandom(), TRNG_GetRandom()
    - Add TRNG_Cmd,TRNG_DeInit functions and optimize TRNG_Start function
    - Optimize the processing of discarded data and enable TRNG in TRNG_Init()
  - **usart**
    - Modify typo
    - Change macro-definition: USART_DR_MPID -> USART_TDR_MPID
    - Modify USART_SetTransType parameter: u32Type -> u16Type
    - Modify USART_SC_ETU_CLK128/256 value
    - Modify return type of function USART_DeInit
    - Remove u32StopBit param from stc_usart_smartcard_init_t structure
    - Add function note: USART_FuncCmd
    - Round off baudrate fraction division
    - Split register USART_DR to USART_RDR and USART_TDR
    - Delete function: USART_GetUsartClockDiv
    - Fix MISRAC2012 warning: USART_GetUsartClockFreq
    - Code Refine
    - Modify return type of function USART_DeInit()
    - Modify USART_SmartCard_Init() for stc_usart_smartcard_init_t has modified(u32StopBit has removed)
    - Fix bug: did not enable MP while USART_MultiProcessor_Init()
    - Re-define IS_USART_SMARTCARD_UNIT
    - API refined: USART_SetBaudrate()
  - **usb**
    - Modify typo
    - Fix bug for function usb_clearepstall()
  - **utility**
    - Modify register USART DR to USART TDR
    - Prohibit DDL_DelayMS and DDL_DelayUS functions from being optimized
  - **wdt**
    - Optimize WDT_ClearStatus function timeout
#### midwares
- ##### hc32/iec60730_class_b_stl
  - Modify register USART DR to USART TDR
- ##### hc32/usb
  - Modify for variable alignment
  - Typo: Initailizes -> Initializes
  - Modify API usb_dev_resume()
  - Modify function usb_susp_isr()
  - Modify for doxygen
  - Replace MAX_CHNUM by USB_MAX_CH_NUM
  - Delete micro define MAX_CHNUM
#### projects
- ##### ev_hc32f4a0_lqfp176/applications
  - **execute_inplace/qspi_xip**
    - SysTick_Handler add __DSB for Arm Errata 838869
  - **functional_safety/iec60730_class_b**
    - SysTick_Handler add __DSB for Arm Errata 838869
    - Change STL IO test input pin: PA0 -> PH7
    - Initialize XTAL32 using BSP_XTAL32_Init
    - Modify sw_count field of stc_tmra_init_t: u16xxx -> u8xxx
  - **iap/iap_app**
    - SysTick_Handler add __DSB for Arm Errata 838869
    - Rename function CRC_CalculateData8 to CRC_CRC16_Calculate
  - **iap/iap_boot**
    - SysTick_Handler add __DSB for Arm Errata 838869
    - Rename function CRC_CalculateData8 to CRC_CRC16_Calculate
  - **iap/iap_ymodem_app**
    - SysTick_Handler add __DSB for Arm Errata 838869
  - **iap/iap_ymodem_boot**
    - SysTick_Handler add __DSB for Arm Errata 838869
  - **usb/usb_dev_cdc_msc**
    - Rename function SDMMC_ACMD41_SendOperatCond to SDMMC_ACMD41_SendOperateCond
    - Do not erase SD card before write operation
  - **usb/usb_dev_hid_msc**
    - Rename function SDMMC_ACMD41_SendOperatCond to SDMMC_ACMD41_SendOperateCond
    - Do not erase SD card before write operation
  - **usb/usb_dev_mouse**
    - SysTick_Handler add __DSB for Arm Errata 838869
  - **usb/usb_dev_msc**
    - Rename function SDMMC_ACMD41_SendOperatCond to SDMMC_ACMD41_SendOperateCond
    - Do not erase SD card before write operation
  - **usb/usb_host_cdc**
    - SysTick_Handler add __DSB for Arm Errata 838869
  - **usb/usb_host_mouse_kb**
    - SysTick_Handler add __DSB for Arm Errata 838869
  - **usb/usb_host_msc**
    - SysTick_Handler add __DSB for Arm Errata 838869
- ##### ev_hc32f4a0_lqfp176/examples
  - **adc/adc_awd**
    - Set XTAL as system clock source
    - Modify printf baudrate
  - **adc/adc_base**
    - Set XTAL as system clock source
    - Modify printf baudrate
  - **adc/adc_channel_remap**
    - Set XTAL as system clock source
    - Modify printf baudrate
  - **adc/adc_dma**
    - Set XTAL as system clock source
    - Modify printf baudrate
  - **adc/adc_extended_channel**
    - Set XTAL as system clock source
    - Modify printf baudrate
  - **adc/adc_hard_trigger**
    - Set XTAL as system clock source
    - Modify printf baudrate
  - **adc/adc_pga**
    - Set XTAL as system clock source
    - Modify printf baudrate
  - **adc/adc_sample_hold**
    - Set XTAL as system clock source
    - Modify printf baudrate
  - **aes/aes_base**
    - Set XTAL as system clock source
    - Modify printf baudrate
  - **can/can_classical**
    - SysTick_Handler add __DSB for Arm Errata 838869
  - **can/can_fd**
    - SysTick_Handler add __DSB for Arm Errata 838869
    - Changed baudrate of data phase from 8Mbps to 5Mbps.
  - **can/can_ttcan**
    - SysTick_Handler add __DSB for Arm Errata 838869
  - **clk/clk_switch_sysclk**
    - Modify XTAL32 initialize process, use BSP_XTAL32_Init() to replace Xtal32Init()
  - **crc/crc_hw_accumulate_check**
    - Add crc_hw_accumulate_check example
  - **crc/crc_hw_encode_hw_check**
    - Modify for reconstructed API
  - **crc/crc_hw_encode_sw_check**
    - Modify for reconstructed API
  - **ctc/ctc_xtal32_trimming**
    - Initialize XTAL32 using BSP_XTAL32_Init
  - **dac/dac_base**
    - Define DAC_DATA_MAX by resolution
  - **dac/dac_sync_mode**
    - Define DAC_DATA_MAX by resolution
  - **dcu/dcu_sawtooth_wave_mode**
    - Sync driver: DCU reload interrupt is always valid
  - **dmac/dmac_base**
    - Add DMA2_Error_IrqCallback function
  - **dvp/dvp_camera_display**
    - Re-implement code
  - **efm/efm_chip_erase**
    - Add efm_chip_erase example
  - **efm/efm_dbus**
    - Add efm_dbus example
  - **efm/efm_otp**
    - Modify the process
  - **efm/efm_sequence_program**
    - Add Customize defintion
    - Re-structure
  - **efm/efm_swap**
    - Use EFM_GetSwapStatus to judge
  - **emb/emb_cmp_brake_timer4**
    - Typo: hander -> handler
    - Fix magic number
    - Modify TMR4_PwmConfig: enable main output following PWM initialization
  - **emb/emb_cmp_brake_timer6**
    - Modify typo
    - Fix magic number
  - **emb/emb_osc_brake_timer4**
    - Typo: hander -> handler
    - Modify TMR4_PwmConfig: enable main output following PWM initialization
  - **emb/emb_osc_brake_timer6**
    - Modify typo
  - **emb/emb_port_brake_timer4**
    - Typo: hander -> handler
    - Modify TMR4_PwmConfig: enable main output following PWM initialization
  - **emb/emb_port_brake_timer6**
    - Modify typo
  - **emb/emb_pwm_brake_timer4**
    - Typo: hander -> handler
    - Modify TMR4_PwmConfig: enable main output following PWM initialization
  - **emb/emb_pwm_brake_timer6**
    - Modify typo
  - **emb/emb_sw_brake_timer4**
    - Modify TMR4_PwmConfig: enable main output following PWM initialization
  - **emb/emb_sw_brake_timer6**
    - Modify typo
  - **eth/eth_loopback**
    - Modify the process of obtaining PHY status
    - Add MAC interface selection before ETH_DeInit function
    - Disable auto negotiation in low_level_init function
    - SysTick_Handler add __DSB for Arm Errata 838869
  - **eth/eth_twoboards**
    - Add MAC interface selection before ETH_DeInit function
    - SysTick_Handler add __DSB for Arm Errata 838869
  - **exmc/exmc_dmc_sdram_is42s16400j7tli**
    - Modify EXCLK frequency: 60MHz -> 30MHz
    - Fix typos
    - Fix memory address printf value
  - **exmc/exmc_sdram_sram**
    - Modify EXCLK frequency: 60MHz -> 30MHz
    - Fix typos
    - Fix memory address printf value
  - **exmc/exmc_smc_lcd_nt35510**
    - Change EXCLK freqeuncy to 30MHz
  - **exmc/exmc_smc_sram_is62wv51216**
    - Modify EXCLK frequency: 60MHz -> 30MHz
    - Fix typos and modify file brief
    - Fix memory address printf value
  - **hash/hash_base**
    - Set XTAL as system clock source
    - Modify printf baudrate
  - **hash/hash_hmac**
    - Set XTAL as system clock source
    - Modify printf baudrate
  - **hrpwm/hrpwm_output**
    - Modify for Peripheral clock command process
  - **i2c/i2c_master_dma**
    - SysTick_Handler add __DSB for Arm Errata 838869
    - Add definition I2C_ADDR_MD as address condition select
    - Configure DMA interrupt disable in I2C_DMA_Initialize() function
  - **i2c/i2c_master_int**
    - SysTick_Handler add __DSB for Arm Errata 838869
  - **i2c/i2c_master_polling**
    - SysTick_Handler add __DSB for Arm Errata 838869
    - Add definition I2C_ADDR_MD as address condition select
  - **i2c/i2c_slave_dma**
    - SysTick_Handler add __DSB for Arm Errata 838869
    - Add definition I2C_ADDR_MD as address condition select
    - Configure DMA interrupt disable in I2C_DMA_Initialize() function
  - **i2c/i2c_slave_int**
    - SysTick_Handler add __DSB for Arm Errata 838869
    - Add definition I2C_ADDR_MD as address condition select
  - **i2c/i2c_slave_polling**
    - SysTick_Handler add __DSB for Arm Errata 838869
    - Add definition I2C_ADDR_MD as address condition select
  - **icg/icg_wdt_interrupt_hw_startup**
    - Add delay before WDT_GetStatus function
  - **intc/intc_nmi_xtalstop**
    - NMI_Handler add __DSB for Arm Errata 838869
  - **mpu/mpu_core_write_protect**
    - Fixed parameters error of Core_MPU_Region_Size
    - MemManage_Handler add __DSB for Arm Errata 838869
    - Modify trigger condition for RTC protection
    - Optimize RTC init sequence
  - **mpu/mpu_dma_write_protect**
    - NMI_Handler add __DSB for Arm Errata 838869
    - Remove key jitter
  - **mpu/mpu_ip_read_protect**
    - BusFault_Handler add __DSB for Arm Errata 838869
    - Optimize RTC init sequence
  - **ots/ots_base**
    - Set XTAL as system clock source
    - Modify printf baudrate
  - **ots/ots_scaling_experiment**
    - Set XTAL as system clock source
    - Modify printf baudrate
  - **pwc/pwc_lpc**
    - Modify typo
    - Clear wake up event flag in PdMode_Init() function
  - **pwc/pwc_stop_wake**
    - Support PWC_STOP_WFE
  - **rtc/rtc_alarm**
    - Optimize RTC init sequence
    - Replace XTAL32_ClkInit to BSP_XTAL32_Init
  - **rtc/rtc_calendar**
    - Optimize RTC init sequence
    - Modify the judgment condition for RTC operation status
  - **rtc/rtc_calibration_output**
    - Optimize RTC init sequence
    - Replace XTAL32_ClkInit to BSP_XTAL32_Init
  - **rtc/rtc_intrusion_detect**
    - Optimize RTC init sequence
    - Replace XTAL32_ClkInit to BSP_XTAL32_Init
  - **rtc/rtc_low_power**
    - Optimize RTC init sequence
    - Delete XTAL32_ClkInit
  - **sdioc/sdioc_mmc**
    - Modify RCA value about EMMC device
    - Rename function SDMMC_CMD1_SendOperatCond to SDMMC_CMD1_SendOperateCond
    - Rename MMC_CARD_STAT_PAG to MMC_CARD_STAT_PGM
  - **sdioc/sdioc_sd**
    - Rename function SDMMC_ACMD41_SendOperatCond to SDMMC_ACMD41_SendOperateCond
  - **sdioc/sdioc_sdio**
    - Add sdioc_sdio example
  - **spi/spi_dma**
    - Modify the IO properties of SPI
  - **spi/spi_int**
    - Modify the IO properties of SPI
    - Modify rx interrupt priority of SPI
  - **spi/spi_polling**
    - Modify the IO properties of SPI
    - Replace the tx&rx function of SPI
  - **sram/sram_error_check**
    - NMI_Handler add __DSB for Arm Errata 838869
  - **systick/systick_int**
    - SysTick_Handler add __DSB for Arm Errata 838869
  - **timer0/timer0_basetimer**
    - Replace XTAL32_Config to BSP_XTAL32_Init
  - **timer2/timer2_capture**
    - Refine code due to some of member type of struct stc_tmra_init_t is changed
  - **timer2/timer2_clock_source**
    - Refine code due to some of member type of struct stc_tmra_init_t is changed
  - **timer4/timer4_event_compare**
    - Update TMR4 event: EVT_SRC_TMR4_1_SCMP_UH -> EVT_SRC_TMR4_1_SCMP0
  - **timer4/timer4_event_delay**
    - Update TMR4 event: EVT_SRC_TMR4_1_SCMP_UH -> EVT_SRC_TMR4_1_SCMP0
  - **timer4/timer4_pwm_through**
    - Modify the initial configuration to achieve 0% or 100% duty cycle
  - **timer6/timer6_capture**
    - Modify the PWM stop polarity as high
  - **timer6/timer6_capture_dual_buf**
    - Modify the PWM stop polarity as high
  - **timer6/timer6_cmp_deadtime**
    - Remove redundant code
  - **timer6/timer6_cmp_sawtooth**
    - Remove redundant code
  - **timer6/timer6_cmp_sawtooth_dual_buf**
    - Remove redundant code
  - **timer6/timer6_cmp_triangular_buf**
    - Remove redundant code
  - **timer6/timer6_define_pwm_number**
    - Modify for Peripheral clock command process
  - **timer6/timer6_hw_code_cnt**
    - Modify debug info
  - **timer6/timer6_pulse_encoder_z_count**
    - Add timer6_pulse_encoder_z_count example
  - **timera/timera_base_timer**
    - Refine code due to some of member type of struct stc_tmra_init_t is changed
  - **timera/timera_capture**
    - Set XTAL as system clock source
    - Refine code due to some of member type of struct stc_tmra_init_t is changed
    - Modify uart baudrate:19200->115200
  - **timera/timera_cascade_count**
    - Refine code due to some of member type of struct stc_tmra_init_t is changed
  - **timera/timera_compare_value_buffer**
    - Set XTAL as system clock source
    - Refine code due to some of member type of struct stc_tmra_init_t is changed
    - Modify uart baudrate:19200->115200
  - **timera/timera_pulse_encoder_z_count**
    - Add timera_pulse_encoder_z_count example
  - **timera/timera_pwm**
    - Refine code due to some of member type of struct stc_tmra_init_t is changed
  - **trng/trng_base**
    - Set XTAL as system clock source
    - Modify printf baudrate
  - **usart/usart_clocksync_dma**
    - Add usart_clocksync_dma example
  - **usart/usart_smartcard_atr**
    - Remove u32StopBit from stcSmartCardInit structure
  - **usart/usart_uart_dma**
    - Split register USART_DR to USART_RDR and USART_TDR
  - **usart/usart_uart_multiprocessor**
    - Optimize the RX process
  - **wdt/wdt_interrupt_sw_startup**
    - Add delay before WDT_GetStatus function
#### utils
------
## V2.1.0  Jan 15, 2023
#### documents
#### drivers
- ##### bsp/components
  - **gt9xx**
    - Add gt9xx component
  - **nt35510**
    - Compliant LCD drive IC: NT35310
- ##### bsp/ev_hc32f4a0_lqfp176
  - Add configuration of XTAL IO as analog function
  - Add XTAL/XTAL32 IO define
  - Re-define macro: BSP_KEY_KEY10_WAKEUP
  - Add gt9xx bsp
  - Add timing comments
  - Optimize timing parameters
  - Optimize function arguments
  - Update function arguments
  - Add macro-define:LIN & smartcard
  - Initialize CS state
- ##### cmsis/Device
  - Modify headfile register address and register name based on reference manual Rev1.13
  - Delete the __low_level_init function of IAR and $Sub$$main function of MDK
- ##### hc32_ll_driver
  - **generic**
    - Modify version as 2.1.0
    - Implemented the definition of __NO_INIT for AC6 and ARM Compiler
    - ARM Compiler suppress warning message: diag_1296
  - **interrupts_share**
    - Rename I2Cx_Error_IrqHandler as I2Cx_EE_IrqHandler
    - Refine TMRA CMP DCU MAU share handler
  - **adc**
    - Modify macro group definition: ADC_Scan_Mode, ADC_Sync_Unit, ADC_Sync_Mode
    - API fixed: ADC_DeInit()
  - **aos**
    - Modified parameters name of API AOS_CommonTriggerCmd() and AOS_SetTriggerEventSrc()
    - Macro name modified: from IS_AOS_TRIG_SEL to IS_AOS_TARGET
    - Modified parameters name and comments of AOS_CommonTriggerCmd() and AOS_SetTriggerEventSrc()
  - **can**
    - Deleted redundant comments
    - Remove CAN_FLAG_RX_BUF_OVF from CAN_FLAG_CLR_ALL
    - API fixed: CAN_FillTxFrame(), CAN_GetStatus(), CAN_ClearStatus()
  - **clk**
    - Refine stc_clock_freq_t
    - Fixed bug# GetClockFreq() API xtal32 value
    - Modified CLK_PLLN_DEFAULT value
    - Optimize API CLK_SetCANClockSrc(), add assert IS_PWC_UNLOCKED()
  - **cmp**
    - Modify structure stc_cmp_window_init_t
    - Modify macro define for API
  - **crc**
    - Add waiting time after write CRC data
  - **dac**
    - Modify function: DAC_AMPCmd
    - Modify function: DAC_AMPCmd and add assert
    - Synchronize register: EN->E,ADPSL->ADCSL,ALIGN->DPSEL
  - **dcu**
    - Modify macro group comments: DCU_Interrupt_Type
    - Synchronize register: DCU_INTSEL -> DCU_INTEVTSEL
    - Modify function comments: DCU_IntCmd
  - **dma**
    - Modify DMA_StructInit() default value
    - Modify API DMA_DeInit and add LLP address assert
  - **efm**
    - Add Flash protect level define
    - Code refine
    - Use define to replace magic data
    - Add API EFM_Protect_Enable & EFM_WriteSecurityCode
    - Modify API EFM_Read & EFM_Program
  - **emb**
    - Modify structure comments:stc_emb_monitor_tmr_pwm_t
    - Optimize function: EMB_TMR4_Init
    - Optimize function: EMB_TMR6_Init
  - **fcm**
    - Modify parameter check for reference clock source
  - **gpio**
    - Add API GPIO_AnalogCmd() and GPIO_ExIntCmd()
  - **i2c**
    - Add API I2C_SlaveAddrCmd()
    - Add API I2C_SlaveAddrCmd(), modify API I2C_SlaveAddrConfig()
  - **icg**
    - Delete ICG2 function
  - **interrupts**
    - Delete comment code
    - Add macro-definition: EIRQFR_REG/NMIENR_REG/INTWKEN_REG
  - **mpu**
    - Update define base on new head file
    - Modify IS_MPU_SP_START_ADDR & SP start address
  - **ots**
    - API fixed: OTS_CalculateTemp()
  - **pwc**
    - Refine API PWC_STOP_Enter()
    - Modify API PWC_HighSpeedToLowSpeed() base umRev1.13
    - Optimize API PWC_STOP_ClockSelect() & comment
  - **qspi**
    - Modify the conditions for entering direct communication mode
  - **smc**
    - Modify EXMC_SMC_StructInit, EXMC_SMC_Init, EXMC_SMC_GetChipConfig
    - Delete function comments: EXMC_SMC_Chipx
  - **spi**
    - Add frame level processing for API SPI_TxRx(),SPI_Tx()
  - **sram**
    - Deleted redundant comments
  - **tmr2**
    - Deleted redundant comments
  - **tmr4**
    - Update API parameter u16IntType to u32IntType
    - Modify macro-define: TMR4_OCSR_MASK
    - Re-name parameter u16IntType to u32IntType
    - Add RCSR register data type
  - **tmr6**
    - Modify structure stc_tmr6_deadtime_config_t
    - Modify structure stc_timer6_init_t to stc_tmr6_init_t
    - Modify macro define for group TMR6_Emb_Ch_Define
    - Modify macro define for group TMR6_hardware_xxx_condition_Define
    - Modify macro define for group TMR6_HW_Count_xx_Cond_Define
    - Modify macro define for group TMR6_Valid_Period_Count_Cond_Define
    - Modify API TMR6_SetFilterClockDiv()
    - Define variable in the beginning of the function
  - **tmra**
    - Comments optimization
  - **trng**
    - API fixed: TRNG_Init()
  - **usart**
    - Optimize UART DIV_Fraction calculation time
    - Fix bug: expressions may cause overflow when calculate UART DIV_Fraction
  - **usb**
    - Add USB core ID select function
    - Delete comment
    - Add USB DMA function
  - **utility**
    - Support re-target printf for IAR EW version 9 or later
#### midwares
- ##### hc32/iec60730_class_b_stl
  - Optimize macros definitions
  - Modify USART_SR_TXE to USART_SR_TC in STL_ConsoleOutputChar()
  - Fix warning: MISRAC2012-Rule-18.4
  - Fix bug: Reading CC Build CRC32 value is error in release project
- ##### hc32/usb
  - Add USB core ID select function
  - Modify for MISRAC
  - Delete comment
  - Fix bug for USB endpoint GET_STATUS request
  - Modify for variable alignment
  - Add bot xfer error processing
  - Remove msc bot reset operation
  - Optimize for device insert detection
  - Remove the judgment of ErrCnt when xfer error
#### projects
- ##### ev_hc32f4a0_lqfp176/applications
  - **functional_safety/iec60730_class_b**
    - Add VBAT initialization
    - Add configuration of XTAL32 IO as analog function
  - **iap/iap_boot**
    - Add configuration of XTAL IO as analog function
  - **iap/iap_ymodem_boot**
    - Add configuration of XTAL IO as analog function
    - Add print strings for download and upload completion
  - **usb/usb_dev_cdc**
    - Modify for MISRAC
    - Add USB core ID select function
    - Modify DEV_MANUFACTURER_STRING
  - **usb/usb_dev_cdc_msc**
    - Modify for MISRAC
    - Add USB core ID select function
    - Using micro SD card as memory and support USB HS
    - Add usb_dev_cdc_msc application
    - Modify the error of CSD parameter calculation
    - Modify DEV_MANUFACTURER_STRING
    - Modify Vendor Identification
  - **usb/usb_dev_hid_cdc**
    - Modify for MISRAC
    - Add USB core ID select function
    - Modify DEV_MANUFACTURER_STRING
  - **usb/usb_dev_hid_custom**
    - Add USB core ID select function
    - Modify DEV_MANUFACTURER_STRING
  - **usb/usb_dev_hid_msc**
    - Add USB core ID select function
    - Using micro SD card as memory and support USB HS
    - Add usb_dev_hid_msc application
    - Modify the error of CSD parameter calculation
    - Modify DEV_MANUFACTURER_STRING
    - Modify Vendor Identification
  - **usb/usb_dev_mouse**
    - Add USB core ID select function
    - Modify DEV_MANUFACTURER_STRING
  - **usb/usb_dev_msc**
    - Add USB core ID select function
    - Using micro SD card as memory and support USB HS
    - Add usb_dev_msc application
    - Modify the error of CSD parameter calculation
    - Modify DEV_MANUFACTURER_STRING
    - Modify Vendor Identification
  - **usb/usb_host_cdc**
    - Add USB core ID select function
  - **usb/usb_host_mouse_kb**
    - Add USB core ID select function
  - **usb/usb_host_msc**
    - Add USB core ID select function
    - Support LFN print
    - Fix bug for device disconnect detect
- ##### ev_hc32f4a0_lqfp176/examples
  - **adc/adc_awd**
    - Comment fixed
  - **adc/adc_base**
    - Add configuration of XTAL IO as analog function
    - Add configuration usage of sampling time
  - **can/can_classical**
    - CAN_IrqCallback() fixed
  - **can/can_fd**
    - CAN_IrqCallback() fixed
  - **can/can_ttcan**
    - CAN_IrqCallback() fixed
  - **clk/clk_switch_sysclk**
    - Add configuration of XTAL and XTAL32 IO as analog function
  - **clk/clk_xtalstop_detect**
    - Add configuration of XTAL IO as analog function
  - **cmp/cmp_normal_blankwindow**
    - Modify for driver update
  - **cmp/cmp_normal_int**
    - Modify for driver update
  - **cmp/cmp_window**
    - Modify for driver update
  - **ctc/ctc_ctcref_trimming**
    - Add configuration of XTAL IO as analog function
  - **ctc/ctc_xtal32_trimming**
    - Add configuration of XTAL and XTAL32 IO as analog function
  - **ctc/ctc_xtal_trimming**
    - Add configuration of XTAL IO as analog function
  - **dac/dac_base**
    - Simplify the dac base example
  - **dac/dac_sync_mode**
    - Add dac_sync_mode example
  - **efm/efm_protect**
    - Add efm_protect example
  - **emb/emb_cmp_brake_timer4**
    - Sync CMP and DAC driver
  - **emb/emb_cmp_brake_timer6**
    - Sync CMP and DAC driver
    - Modify structure stc_timer6_init_t to stc_tmr6_init_t
  - **emb/emb_osc_brake_timer4**
    - Add configuration of XTAL IO as analog function
  - **emb/emb_osc_brake_timer6**
    - Add configuration of XTAL IO as analog function
    - Modify structure stc_timer6_init_t to stc_tmr6_init_t
  - **emb/emb_port_brake_timer6**
    - Modify structure stc_timer6_init_t to stc_tmr6_init_t
  - **emb/emb_pwm_brake_timer6**
    - Modify structure stc_timer6_init_t to stc_tmr6_init_t
  - **emb/emb_sw_brake_timer6**
    - Modify structure stc_timer6_init_t to stc_tmr6_init_t
  - **eth/eth_loopback**
    - Delect RX_ER Pin in RMII mode
  - **eth/eth_twoboards**
    - Add configuration of XTAL IO as analog function
  - **exmc/exmc_dmc_sdram_is42s16400j7tli**
    - Initialize buffer with random data
  - **exmc/exmc_nfc_nandflash_mt29f2g08ab**
    - Initialize buffer with random data
  - **exmc/exmc_sdram_sram**
    - Add exmc_sdram_sram example
  - **exmc/exmc_smc_lcd_nt35510**
    - Add exmc_smc_lcd_nt35510 example
  - **exmc/exmc_smc_sram_is62wv51216**
    - Initialize buffer with random data
  - **fcm/fcm_freq_measure**
    - Add configuration of XTAL and XTAL32 IO as analog function
    - Modify print process after clear flag in IRQ handle
    - Modify reference clock for SWDTLRC
  - **hrpwm/hrpwm_output**
    - Modify structure stc_timer6_init_t to stc_tmr6_init_t
  - **i2c/i2c_master_dma**
    - Add i2c_master_dma example
  - **i2c/i2c_master_int**
    - Modify LED blink time
  - **i2c/i2c_master_polling**
    - Modify LED blink time
  - **i2c/i2c_slave_dma**
    - Add i2c_slave_dma example
  - **i2c/i2c_slave_int**
    - Modify LED blink time
  - **i2c/i2c_slave_polling**
    - Modify LED blink time
  - **icg/icg_swdt_interrupt_hw_startup**
    - Exchange LED color
  - **icg/icg_wdt_interrupt_hw_startup**
    - Exchange LED color
  - **intc/intc_nmi_xtalstop**
    - Add configuration of XTAL IO as analog function
  - **ots/ots_base**
    - Print log fixed
  - **pwc/pwc_lpc**
    - Code refine
  - **pwc/pwc_lvd**
    - Add filter configure to LVD initialize
  - **pwc/pwc_stop_wake**
    - Code refine
  - **rtc/rtc_alarm**
    - Add configuration of XTAL32 IO as analog function
  - **rtc/rtc_calibration_output**
    - Add configuration of XTAL32 IO as analog function
  - **rtc/rtc_intrusion_detect**
    - Add configuration of XTAL32 IO as analog function
  - **rtc/rtc_low_power**
    - Add configuration of XTAL32 IO as analog function
  - **sdioc/sdioc_mmc**
    - Add configuration of XTAL IO as analog function
    - Add the function to get extended CSD register
  - **sdioc/sdioc_sd**
    - Add configuration of XTAL IO as analog function
    - Modify the error of CSD parameter calculation
  - **swdt/swdt_interrupt_sw_startup**
    - Exchange LED color
  - **timer0/timer0_basetimer**
    - Add configuration of XTAL32 IO as analog function
  - **timer2/timer2_capture**
    - Macro definition fixed
  - **timer4/timer4_counter_sawtooth**
    - Fix MISRA warning: MISRAC2012-Rule-10.3
  - **timer6/timer6_capture**
    - Modify structure stc_timer6_init_t to stc_tmr6_init_t
    - Modify macro define for group TMR6_hardware_xxx_condition_Define
  - **timer6/timer6_capture_dual_buf**
    - Modify structure stc_timer6_init_t to stc_tmr6_init_t
    - Modify macro define for group TMR6_hardware_xxx_condition_Define
  - **timer6/timer6_cmp_deadtime**
    - Modify structure stc_tmr6_deadtime_config_t
    - Modify structure stc_timer6_init_t to stc_tmr6_init_t
  - **timer6/timer6_cmp_sawtooth**
    - Modify structure stc_timer6_init_t to stc_tmr6_init_t
  - **timer6/timer6_cmp_sawtooth_dual_buf**
    - Modify structure stc_timer6_init_t to stc_tmr6_init_t
  - **timer6/timer6_cmp_triangular_buf**
    - Modify structure stc_timer6_init_t to stc_tmr6_init_t
  - **timer6/timer6_define_pwm_number**
    - Modify structure stc_timer6_init_t to stc_tmr6_init_t
  - **timer6/timer6_hw_code_cnt**
    - Modify macro define for group TMR6_HW_Count_xx_Cond_Define
  - **timer6/timer6_hw_sta_stp_clr**
    - Modify structure stc_timer6_init_t to stc_tmr6_init_t
    - Modify macro define for group TMR6_hardware_xxx_condition_Define
  - **timer6/timer6_sw_sync**
    - Modify structure stc_timer6_init_t to stc_tmr6_init_t
    - Code refine for peripheral clock command
  - **timer6/timer6_valid_period**
    - Modify structure stc_timer6_init_t to stc_tmr6_init_t
  - **timera/timera_base_timer**
    - Comments fixed
  - **timera/timera_capture**
    - TMRA_IrqCallback(): comment fixed, print log fixed
  - **timera/timera_pwm**
    - Comment fixed
  - **usart/usart_clocksync_int**
    - Read USART_DR.RDR when USART overrun error occur
  - **usart/usart_smartcard_atr**
    - Add delay time for smartcard cold reset
    - Read USART_DR.RDR when USART overrun error occur.
  - **usart/usart_uart_dma**
    - Delete the redundant code
    - Read USART_DR.RDR when USART overrun error occur.
    - Update UART timeout function calculating formula for Timer0 CMP value
  - **usart/usart_uart_halfduplex_int**
    - Read USART_DR.RDR when USART overrun error occur
  - **usart/usart_uart_int**
    - Read USART_DR.RDR when USART overrun error occur
  - **usart/usart_uart_multiprocessor**
    - Read USART_DR.RDR when USART overrun error occur
  - **usart/usart_uart_polling**
    - Read USART_DR.RDR when USART overrun error occur
  - **wdt/wdt_interrupt_sw_startup**
    - Exchange LED color
#### utils
------
## V2.0.0  Mar 31, 2022
- Initial release.