1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
|
/* Copyright (c) 2023, Canaan Bright Sight Co., Ltd
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 2006-2025 RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <rtthread.h>
#include <rtdevice.h>
#include <utest.h>
#include <string.h>
#include "drv_i2c.h"
#include "drv_pinctrl.h"
#include "drv_gpio.h"
/*
* 测试K230 I2C的主从机通信，在这里采用I2C0作为测试对象
*
* 硬件平台：
* 测试的硬件平台为庐山派开发板，使用的I2C0引脚是GPIO048(SCL)
* 和GPIO049(SDA)。
*
* 测试说明：
* 1. 测试I2C0主机模式
* 主机模式下，主机向从机发送16字节数据（不包括写读地址），
* 然后再读取回来进行校验，共执行两次，分别是400kHz和1MHz速率。
* 第一次写数据时，带一字节地址，总共写16字节数据，读取15字节数据，
* 第二次写数据时，带一字节地址，总共写17字节数据，读取16字节数据。
* 在两次写数据的过程中，如果开启dma功能，第一次会调用dma进行写，
* 第二次会调用dma进行读。（前提是BSP_USING_I2C_DMA宏被定义，
* 因为pdma要求地址与数据都要4字节对齐（地址的对齐问题会在驱动
* 内部处理），若写/读数据大小非4字节对齐，即使启用了dma功能，
* 实际也是调用的cpu轮询读写，这一点需要应用程序注意并处理）
* 注：使用的从机为AT24C08 EEPROM，设备地址为0x50，
* page size 为 16 字节。
*/
#define I2C_NAME "i2c0"
#define TARGET_ADDR 0x50
#define TEST_BUFFER_SIZE 16
#define I2C_SCL_PIN 48
#define I2C_SDA_PIN 49
#define I2C_SCL_PIN_AF IOMUX_FUNC4
#define I2C_SDA_PIN_AF IOMUX_FUNC4
static void test_i2c0_deinit_pin(void)
{
k230_pinctrl_set_function(I2C_SCL_PIN, IOMUX_FUNC1);
k230_pinctrl_set_function(I2C_SDA_PIN, IOMUX_FUNC1);
k230_pinctrl_set_oe(I2C_SCL_PIN, 0);
k230_pinctrl_set_oe(I2C_SDA_PIN, 0);
k230_pinctrl_set_ie(I2C_SCL_PIN, 1);
k230_pinctrl_set_ie(I2C_SDA_PIN, 1);
kd_pin_mode(I2C_SCL_PIN, GPIO_DM_INPUT);
kd_pin_mode(I2C_SDA_PIN, GPIO_DM_INPUT);
}
static void test_i2c0_init_pin(void)
{
k230_pinctrl_set_function(I2C_SCL_PIN, I2C_SCL_PIN_AF); // I2C0_SCL
k230_pinctrl_set_function(I2C_SDA_PIN, I2C_SDA_PIN_AF); // I2C0_SDA
k230_pinctrl_set_oe(I2C_SCL_PIN, 1);
k230_pinctrl_set_oe(I2C_SDA_PIN, 1);
k230_pinctrl_set_ie(I2C_SCL_PIN, 1);
k230_pinctrl_set_ie(I2C_SDA_PIN, 1);
}
static int test_i2c_check_pin(void)
{
test_i2c0_deinit_pin();
if (kd_pin_read(I2C_SCL_PIN) != 1 || kd_pin_read(I2C_SDA_PIN) != 1)
{
LOG_W("i2c bus is not idle, try to recover it.");
k230_pinctrl_set_oe(I2C_SCL_PIN, 1);
kd_pin_mode(I2C_SCL_PIN, GPIO_DM_OUTPUT);
for (rt_uint8_t i = 0; i < 9; i++)
{
kd_pin_write(I2C_SCL_PIN, 0);
rt_hw_us_delay(2);
kd_pin_write(I2C_SCL_PIN, 1);
rt_hw_us_delay(2);
}
k230_pinctrl_set_oe(I2C_SCL_PIN, 0);
kd_pin_mode(I2C_SCL_PIN, GPIO_DM_INPUT);
}
if (kd_pin_read(I2C_SCL_PIN) != 1 || kd_pin_read(I2C_SDA_PIN) != 1)
{
LOG_E("i2c bus recover failed");
return -RT_ERROR;
}
LOG_I("i2c bus(pin: %u, %u) is idle, init i2c bus pin", I2C_SCL_PIN, I2C_SDA_PIN);
test_i2c0_init_pin();
return RT_EOK;
}
static void _test_i2c0_master(rt_uint8_t *buffer_w, rt_uint8_t *buffer_r, rt_uint32_t size, rt_uint32_t speed)
{
rt_err_t ret = RT_EOK;
struct rt_i2c_bus_device *dev;
struct rt_i2c_msg msgs[2];
dev = rt_i2c_bus_device_find(I2C_NAME);
uassert_not_null(dev);
rt_i2c_control(dev, RT_I2C_DEV_CTRL_CLK, (void *)&speed);
msgs[0].addr = TARGET_ADDR;
msgs[0].flags = RT_I2C_WR;
msgs[0].buf = buffer_w;
msgs[0].len = size + 1;
if (rt_i2c_transfer(dev, msgs, 1) != 1)
{
LOG_E("i2c transfer failed");
uassert_true(0);
}
rt_thread_mdelay(10);
msgs[0].addr = TARGET_ADDR;
msgs[0].flags = RT_I2C_WR | RT_I2C_NO_STOP;
msgs[0].buf = &buffer_r[0];
msgs[0].len = 1;
msgs[1].addr = TARGET_ADDR;
msgs[1].flags = RT_I2C_RD | RT_I2C_NO_START;
msgs[1].buf = &buffer_r[1];
msgs[1].len = size;
if (rt_i2c_transfer(dev, msgs, 2) != 2)
{
LOG_E("i2c transfer failed");
uassert_true(0);
}
LOG_I("Read data:\n");
for (rt_uint8_t i = 1; i < size + 1; i++)
{
LOG_I("0x%02X ", buffer_r[i]);
}
uassert_buf_equal(buffer_w + 1, buffer_r + 1, size);
}
static void test_i2c0_master(void)
{
rt_uint8_t buffer_w[TEST_BUFFER_SIZE + 1];
rt_uint8_t buffer_r[TEST_BUFFER_SIZE + 1];
rt_uint32_t size = TEST_BUFFER_SIZE;
rt_uint32_t speed = 400000; // 400kHz
memset(buffer_w + 1, 0xAA, TEST_BUFFER_SIZE);
buffer_w[0] = 0x00; // memory address
memset(buffer_r, 0x00, TEST_BUFFER_SIZE + 1);
/* if BSP_USING_I2C_DMA is enabled, test i2c write with dma */
_test_i2c0_master(buffer_w, buffer_r, size - 1, speed);
speed = 1000000; // 1MHz
memset(buffer_w + 1, 0x55, TEST_BUFFER_SIZE);
buffer_w[0] = 0x00; // memory address
memset(buffer_r, 0x00, TEST_BUFFER_SIZE + 1);
/* if BSP_USING_I2C_DMA is enabled, test i2c read with dma */
_test_i2c0_master(buffer_w, buffer_r, size, speed);
}
static void testcase(void)
{
LOG_I("This is a i2c test case.\n");
UTEST_UNIT_RUN(test_i2c0_master);
}
static rt_err_t utest_tc_init(void)
{
return test_i2c_check_pin();
}
static rt_err_t utest_tc_cleanup(void)
{
LOG_I("i2c bus pin deinit.\n");
test_i2c0_deinit_pin();
return RT_EOK;
}
UTEST_TC_EXPORT(testcase, "bsp.k230.drivers.i2c", utest_tc_init, utest_tc_cleanup, 100);
|
